summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h
AgeCommit message (Collapse)AuthorFilesLines
2018-05-25cxgb4/cxgb4vf: Notify link changes to OS-dependent codeArjun Vynipadath1-1/+4
We have a confusion of two different abstractions in the Common Code: Physical Link (Port) and Logical Network Interface (Virtual Interface), and we haven't been properly managing the state of the intersection of those two abstractions. On the one hand we have the Physical state of the Link -- up or down -- and on the other we have the logical state of the VI, enabled or not. {ethN} refers to both the Physical and Logical State. In this case, ifconfig only affects/interrogates the Logical State of a VI, and ethtool only deals with the Physical State. And these are different. So, just because we disable the VI, we don't really want to change the Physical Link Up/Down state. Thus, the previous hack to set "lc->link_ok = 0" when we disable a VI is completely incorrect. Where we get into trouble is where the Physical Link State and the Logical VI State cross swords. And that happens in t4_handle_get_port_info() where we need to manage/safe the Physical Link State, but we also need to know when the Logical VI State has changed and pass that back up to the OS-dependent Driver routine t4_os_link_changed() which is concerned about the Logical Interface. So we enable a VI and that causes Firmware to send us a new Port Information message, but if none of the Physical Link State particulars have changed, we don't call t4_os_link_changed(). This fix uses the existing OS Contract APIs for the Common Code to inform the OS-dependent portion of the Host Driver when the "Link" (really Logical Network Interface) is "up" or "down". A new API t4_enable_pi_params() is added which calls t4_enable_vi_params() and, if that is successful, then calls back to the OS Contract API t4_os_link_changed() notifying the OS-dependent layer of the potential Link State change. Original Work by : Casey Leedom <leedom@chelsio.com> Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24cxgb4/cxgb4vf: add support for ndo_set_vf_vlanGanesh Goudar1-0/+1
implement ndo_set_vf_vlan for mgmt netdevice to configure the PCIe VF. Original work by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-21cxgb4/cxgbvf: Handle 32-bit fw port capabilitiesGanesh Goudar1-32/+54
Implement new 32-bit Firmware Port Capabilities in order to handle new speeds which couldn't be represented in the old 16-bit Firmware Port Capabilities values. Based on the original work of Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-4/+11
2016-09-21cxgb4/cxgb4vf: Allocate more queues for 25G and 100G adapterHariprasad Shenai1-4/+11
We were missing check for 25G and 100G while checking port speed, which lead to less number of queues getting allocated for 25G & 100G adapters and leading to low throughput. Adding the missing check for both NIC and vNIC driver. Also fixes port advertisement for 25G and 100G in ethtool output. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15cxgb4/cxgb4vf: Add set VF mac address supportHariprasad Shenai1-0/+3
Add ndo_set_vf_mac support which allows to set the MAC address for cxgb4vf interfaces from the host Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-25cxgb4/cxgb4vf: Add link mode mask API to cxgb4 and cxgb4vfGanesh Goudar1-0/+1
Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-29cxgb4vf: Add support to enable logging of firmware mailbox commands for VFHariprasad Shenai1-0/+29
Add new /sys/kernel/debug/ support to dump firmware mailbox commands and replies for debugging purpose. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02cxgb4vf: Make sge init code more readableHariprasad Shenai1-0/+1
Adds a new function t4vf_fl_pkt_align() and use the same in SGE initialization code to find out freelist packet alignment Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18cxgb4vf: Use __dev_uc_sync/__dev_mc_sync to sync MAC addressHariprasad Shenai1-0/+20
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-02cxgb4vf: Adds SRIOV driver changes for T6 adapterHariprasad Shenai1-0/+8
Adds vnic driver register related changes for T6 adapter Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-27cxgb4/cxgb4vf: function and argument name cleanupHariprasad Shenai1-5/+5
This patch changes variable name 'fn' to 'pf' of structure adapter. A 'fn' usually stands for PCI function which could be a PF or a VF. However, the use of this particular variable is explicitly limited to PF only. So, be specific about it in the variable name. Also corrects arguments passed for fn t4_ofld_eq_free, t4_ctrl_eq_free, t4_eth_eq_free, t4_iq_free, t4_alloc_vi, t4_fw_hello, t4_wr_mbox and t4_cfg_pfvf function. Also renames cxgb4_t4_bar2_sge_qregs to t4_bar2_sge_qregs and renames the latter function name in cxgb4vf driver to t4vf_bar2_sge_qregs to avoid conflicts. Also fixes alignment for these function. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-23cxgb4vf: Fix ethtool get_settings for VF driverHariprasad Shenai1-1/+1
Decode and display Port Type and Module Type for ethtool get_settings() call Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09cxgb4/cxgb4vf: Add code to calculate T5 BAR2 Offsets for SGE Queue RegistersHariprasad Shenai1-0/+8
Add new Common Code facilities for calculating T5 BAR2 Offsets for SGE Queue Registers. This new code can handle situations where Queues Per Page * SGE BAR2 Queue Register Area Size > Page Size Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09cxgb4vf: Add and initialize some sge params for VF driverHariprasad Shenai1-3/+8
Add sge_vf_eq_qpp and sge_vf_iq_qpp to (struct sge_params), initialize sge_queues_per_page and sge_vf_qpp in t4vf_get_sge_params(), add new t4vf_prep_adapter() which initializes basic adapter parameters. Grab both SGE_EGRESS_QUEUES_PER_PAGE_VF and SGE_INGRESS_QUEUES_PER_PAGE_VF for VF Drivers since we need both to calculate the User Doorbell area offsets for Egress and Ingress Queues. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+2
Conflicts: drivers/net/ethernet/chelsio/cxgb4vf/sge.c drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c sge.c was overlapping two changes, one to use the new __dev_alloc_page() in net-next, and one to use s->fl_pg_order in net. ixgbe_phy.c was a set of overlapping whitespace changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-10cxgb4vf: FL Starvation Threshold needs to be larger than the SGE's Egress ↵Hariprasad Shenai1-0/+1
Congestion Threshold Free List Starvation Threshold needs to be larger than the SGE's Egress Congestion Threshold or we'll end up in a mutual stall where the driver waits for Ingress Packets to drive replacing Free List Pointers and the SGE waits for Free List Pointers before pushing Ingress Packets to the host. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-10cxgb4/cxgb4vf: For T5 use Packing and Padding Boundaries for SGE DMA transfersHariprasad Shenai1-0/+1
T5 introduces the ability to have separate Packing and Padding Boundaries for SGE DMA transfers from the chip to Host Memory. This change set takes advantage of that to set up a smaller Padding Boundary to conserve PCI Link and Memory Bandwidth with T5. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-10cxgb4: Cleanup macros so they follow the same style and look consistent, part 2Hariprasad Shenai1-1/+1
Various patches have ended up changing the style of the symbolic macros/register defines to different style. As a result, the current kernel.org files are a mix of different macro styles. Since this macro/register defines is used by different drivers a few patch series have ended up adding duplicate macro/register define entries with different styles. This makes these register define/macro files a complete mess and we want to make them clean and consistent. This patch cleans up a part of it. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-10cxgb4vf: Add 40G support for cxgb4vf driverHariprasad Shenai1-0/+6
Add 40G support for cxgb4vf driver. ethtool speed values are just numbers of megabits and there is no SPEED_40000 in ethtool speed values. To be consistent, use integer constants directly for all speeds. Use is_x_10g_port()("is 10Gb/s or higher") in cfg_queues() instead of is_10g_port() ("is exactly 10Gb/s"). Else we will end up using a single "Queue Set" on 40Gb/s adapters. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-23cxgb4: make functions static and remove dead codestephen hemminger1-1/+0
Cleanup by making local functions static. The code to load config file is unreachable in net-next, probably came from some out of tree driver. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-04cxgb4vf: added much cleaner implementation of is_t4()Hariprasad Shenai1-8/+16
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14cxgb4vf: Add support for Chelsio T5 adapterSantosh Rastapur1-0/+24
Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03cxgb4vf: remove __dev* attributesBill Pemberton1-2/+2
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Casey Leedom <leedom@chelsio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2011-08-11chelsio: Move the Chelsio driversJeff Kirsher1-0/+274
Moves the drivers for the Chelsio chipsets into drivers/net/ethernet/chelsio/ and the necessary Kconfig and Makefile changes. CC: Divy Le Ray <divy@chelsio.com> CC: Dimitris Michailidis <dm@chelsio.com> CC: Casey Leedom <leedom@chelsio.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-29 05:21:53 +0300