summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
AgeCommit message (Collapse)AuthorFilesLines
2019-03-02cxgb4vf: Call netif_carrier_off properly in pci_probeArjun Vynipadath1-1/+1
netif_carrier_off() should be called only after register_netdev(). Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-02cxgb4vf: Revert force link up behaviourArjun Vynipadath1-10/+3
Reverting force link up changes since this behaviour can be achieved using VF link state feature. Reverts: commit 0913667ab3ad ("cxgb4vf: Forcefully link up virtual interfaces") Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-02cxgb4vf: Prefix adapter flags with CXGB4VFArjun Vynipadath1-33/+35
Some of these macros were conflicting with global namespace, hence prefixing them with CXGB4VF. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28cxgb4vf: Enter debugging mode if FW is inaccessibleArjun Vynipadath1-13/+32
If we are not able to reach firmware, enter debugging mode that will help us to get adapter logs. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-28cxgb4/cxgb4vf: Fix up netdev->hw_featuresArjun Vynipadath1-8/+7
GRO is done by cxgb4/cxgb4vf. Hence set NETIF_F_GRO flag for both cxgb4/cxgb4vf. Cleaned up VLAN netdev features in cxgb4vf. Also fixed NETIF_F_HIGHDMA being set unconditionally for vlan netdev features. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14cxgb4vf: Few more link management changes.Vishal Kulkarni1-1/+8
CR4_QSFP 10G Speed technology should be 10000baseKR_Full And also report available FEC modes. Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-03cxgb4/cxgb4vf: Program hash region for {t4/t4vf}_change_mac()Arjun Vynipadath1-26/+73
{t4/t4_vf}_change_mac() API's were only doing additions to MPS_TCAM. This will fail, when the number of tcam entries is limited particularly in vf's. This fix programs hash region with the mac address, when TCAM addtion fails for {t4/t4vf}_change_mac(). Since the locally maintained driver list for hash entries is shared across mac_{sync/unsync}(), added an extra parameter if_mac to track the address added thorugh {t4/t4vf}_change_mac() Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-29cxgb4vf: Update port information in cxgb4vf_open()Arjun Vynipadath1-0/+7
It's possible that the basic port information could have changed since we first read it. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-15cxgb4: remove DEFINE_SIMPLE_DEBUGFS_FILE()Yangtao Li1-14/+2
We already have the DEFINE_SHOW_ATTRIBUTE. There is no need to define such a macro, so remove DEFINE_SIMPLE_DEBUGFS_FILE. Also use the DEFINE_SHOW_ATTRIBUTE macro to simplify some code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-20cxgb4/cxgb4vf: Fix mac_hlist initialization and freeArjun Vynipadath1-3/+3
Null pointer dereference seen when cxgb4vf driver is unloaded without bringing up any interfaces, moving mac_hlist initialization to driver probe and free the mac_hlist in remove to fix the issue. Fixes: 24357e06ba51 ("cxgb4vf: fix memleak in mac_hlist initialization") Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-10cxgb4vf: free mac_hlist properlyArjun Vynipadath1-0/+6
The locally maintained list for tracking hash mac table was not freed during driver remove. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-10cxgb4vf: fix memleak in mac_hlist initializationArjun Vynipadath1-2/+4
mac_hlist was initialized during adapter_up, which will be called every time a vf device is first brought up, or every time when device is brought up again after bringing all devices down. This means our state of previous list is lost, causing a memleak if entries are present in the list. To fix that, move list init to the condition that performs initial one time adapter setup. Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-25cxgb4/cxgb4vf: Notify link changes to OS-dependent codeArjun Vynipadath1-3/+2
We have a confusion of two different abstractions in the Common Code: Physical Link (Port) and Logical Network Interface (Virtual Interface), and we haven't been properly managing the state of the intersection of those two abstractions. On the one hand we have the Physical state of the Link -- up or down -- and on the other we have the logical state of the VI, enabled or not. {ethN} refers to both the Physical and Logical State. In this case, ifconfig only affects/interrogates the Logical State of a VI, and ethtool only deals with the Physical State. And these are different. So, just because we disable the VI, we don't really want to change the Physical Link Up/Down state. Thus, the previous hack to set "lc->link_ok = 0" when we disable a VI is completely incorrect. Where we get into trouble is where the Physical Link State and the Logical VI State cross swords. And that happens in t4_handle_get_port_info() where we need to manage/safe the Physical Link State, but we also need to know when the Logical VI State has changed and pass that back up to the OS-dependent Driver routine t4_os_link_changed() which is concerned about the Logical Interface. So we enable a VI and that causes Firmware to send us a new Port Information message, but if none of the Physical Link State particulars have changed, we don't call t4_os_link_changed(). This fix uses the existing OS Contract APIs for the Common Code to inform the OS-dependent portion of the Host Driver when the "Link" (really Logical Network Interface) is "up" or "down". A new API t4_enable_pi_params() is added which calls t4_enable_vi_params() and, if that is successful, then calls back to the OS Contract API t4_os_link_changed() notifying the OS-dependent layer of the potential Link State change. Original Work by : Casey Leedom <leedom@chelsio.com> Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-17cxgb4vf: display pause settingsGanesh Goudar1-0/+16
Add support to display pause settings Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26ethernet: Use octal not symbolic permissionsJoe Perches1-5/+5
Prefer the direct use of octal for permissions. Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace and some typing. Miscellanea: o Whitespace neatening around these conversions. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-12cxgb4/cxgb4vf: check fw caps to set link mode maskGanesh Goudar1-13/+24
check firmware capabilities before setting ethtool link mode mask, also add few missing speeds. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-05cxgb4vf: Forcefully link up virtual interfacesArjun Vynipadath1-3/+11
The Virtual Interfaces are connected to an internal switch on the chip which allows VIs attached to the same port to talk to each other even when the port link is down. As a result, we generally want to always report a VI's link as being "up". Based on the original work by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Arjun Vynipadath <arjun@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-24cxgb4/cxgb4vf: add support for ndo_set_vf_vlanGanesh Goudar1-0/+2
implement ndo_set_vf_vlan for mgmt netdevice to configure the PCIe VF. Original work by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-28cxgb4/cxgb4vf: support for XLAUI Port TypeGanesh Goudar1-1/+9
Add support for new Backplane XLAUI port type. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-03cxgb4vf: define get_fecparam ethtool callbackGanesh Goudar1-0/+58
Add support to new ethtool operation get_fecparam to fetch FEC parameters. Original Work by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-21cxgb4/cxgbvf: Handle 32-bit fw port capabilitiesGanesh Goudar1-13/+37
Implement new 32-bit Firmware Port Capabilities in order to handle new speeds which couldn't be represented in the old 16-bit Firmware Port Capabilities values. Based on the original work of Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15net/cxgb4vf: Use new PCI_DEV_FLAGS_NO_RELAXED_ORDERING flagCasey Leedom1-0/+18
cxgb4vf Ethernet driver now queries PCIe configuration space to determine if it can send TLPs to it with the Relaxed Ordering Attribute set, just like the pf did. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Reviewed-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-07cxgb4/cxgb4vf: Display 25G and 100G link speedGanesh Goudar1-9/+12
Add support to report 25G and 100G links, which was missed as part of commit "eb97ad99f9ed". Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
2016-12-09cxgb4/cxgb4vf: Assign netdev->dev_port with port IDArjun V1-0/+1
Added missing dev_port assignment in cxgb4vf driver. Also made dev_port assignment of cxgb4 in sync with cxgb4vf driver. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Arjun V <arjun@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08cxgb4/cxgb4vf: Remove deprecated module parametersGanesh Goudar1-8/+1
Remove deprecated module parameters num_vf, dflt_msg_enable and force_init. Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20ethernet: use net core MTU range checking in more driversJarod Wilson1-4/+2
Somehow, I missed a healthy number of ethernet drivers in the last pass. Most of these drivers either were in need of an updated max_mtu to make jumbo frames possible to enable again. In a few cases, also setting a different min_mtu to match previous lower bounds. There are also a few drivers that had no upper bounds checking, so they're getting a brand new ETH_MAX_MTU that is identical to IP_MAX_MTU, but accessible by includes all ethernet and ethernet-like drivers all have already. acenic: - min_mtu = 0, max_mtu = 9000 amazon/ena: - min_mtu = 128, max_mtu = adapter->max_mtu amd/xgbe: - min_mtu = 0, max_mtu = 9000 sb1250: - min_mtu = 0, max_mtu = 1518 cxgb3: - min_mtu = 81, max_mtu = 65535 cxgb4: - min_mtu = 81, max_mtu = 9600 cxgb4vf: - min_mtu = 81, max_mtu = 65535 benet: - min_mtu = 256, max_mtu = 9000 ibmveth: - min_mtu = 68, max_mtu = 65535 ibmvnic: - min_mtu = adapter->min_mtu, max_mtu = adapter->max_mtu - remove now redundant ibmvnic_change_mtu jme: - min_mtu = 1280, max_mtu = 9202 mv643xx_eth: - min_mtu = 64, max_mtu = 9500 mlxsw: - min_mtu = 0, max_mtu = 65535 - Basically bypassing the core checks, and instead relying on dynamic checks in the respective switch drivers' ndo_change_mtu functions ns83820: - min_mtu = 0 - remove redundant ns83820_change_mtu, only checked for mtu > 1500 netxen: - min_mtu = 0, max_mtu = 8000 (P2), max_mtu = 9600 (P3) qlge: - min_mtu = 1500, max_mtu = 9000 - driver only supports setting mtu to 1500 or 9000, so the core check only rules out < 1500 and > 9000, qlge_change_mtu still needs to check that the value is 1500 or 9000 qualcomm/emac: - min_mtu = 46, max_mtu = 9194 xilinx_axienet: - min_mtu = 64, max_mtu = 9000 Fixes: 61e84623ace3 ("net: centralize net_device min/max MTU checking") CC: netdev@vger.kernel.org CC: Jes Sorensen <jes@trained-monkey.org> CC: Netanel Belgazal <netanel@annapurnalabs.com> CC: Tom Lendacky <thomas.lendacky@amd.com> CC: Santosh Raspatur <santosh@chelsio.com> CC: Hariprasad S <hariprasad@chelsio.com> CC: Sathya Perla <sathya.perla@broadcom.com> CC: Ajit Khaparde <ajit.khaparde@broadcom.com> CC: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> CC: Somnath Kotur <somnath.kotur@broadcom.com> CC: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> CC: John Allen <jallen@linux.vnet.ibm.com> CC: Guo-Fu Tseng <cooldavid@cooldavid.org> CC: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> CC: Jiri Pirko <jiri@mellanox.com> CC: Ido Schimmel <idosch@mellanox.com> CC: Manish Chopra <manish.chopra@qlogic.com> CC: Sony Chacko <sony.chacko@qlogic.com> CC: Rajesh Borundia <rajesh.borundia@qlogic.com> CC: Timur Tabi <timur@codeaurora.org> CC: Anirudha Sarangi <anirudh@xilinx.com> CC: John Linn <John.Linn@xilinx.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-29cxgb4/cxgb4vf: fix spelling mistake "provissioned" -> "provisioned"Colin Ian King1-1/+1
Trivial fix to spelling mistake in dev_warn message. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-15cxgb4/cxgb4vf: Add set VF mac address supportHariprasad Shenai1-0/+24
Add ndo_set_vf_mac support which allows to set the MAC address for cxgb4vf interfaces from the host Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-25cxgb4/cxgb4vf: Add link mode mask API to cxgb4 and cxgb4vfGanesh Goudar1-97/+179
Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-25cxgb4vf: Synchronize access to mailboxHariprasad Shenai1-0/+2
The issue comes when there are multiple threads attempting to use the mailbox facility at the same time. The issue is the for the Virtual Function Driver, the only way to get the Virtual Interface statistics is to issue mailbox commands to ask the firmware for the VI Stats. And, because the VI Stats command can only retrieve a smallish number of stats per mailbox command, we have to issue three mailbox commands in quick succession. When ethtool or netstat command to get interface stats and interface up/down is run in a loop for every 0.1 sec, we observed mailbox collisions. And out of the two commands one would fail with the present code, since we don't queue the second command. To overcome the above issue, added a queue to access the mailbox. Whenever a mailbox command is issued add it to the queue. If its at the head issue the mailbox command, else wait for the existing command to complete. Usually command takes less than a milli-second to complete. Also timeout from the loop, if the command under execution takes long time to run. In reality, the number of mailbox access collisions is going to be very rare since no one runs such abusive script. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-16cxgb4/cxgb4vf: Synchronize all MAC addressesHariprasad Shenai1-6/+2
Even if interface is in Promiscuous mode/Allmulti mode synchronize MAC addresses. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-29cxgb4vf: Add support to enable logging of firmware mailbox commands for VFHariprasad Shenai1-0/+112
Add new /sys/kernel/debug/ support to dump firmware mailbox commands and replies for debugging purpose. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-06cxgb4/cxgb4vf: Deprecate module parameter dflt_msg_enableHariprasad Shenai1-1/+2
Message level can be set through ethtool, so deprecate module parameter which is used to set the same. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11cxgb4vf: Set number of queues in pci probe onlyHariprasad Shenai1-4/+4
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11cxgb4vf: Add a couple more checks for invalid provisioning configurationsHariprasad Shenai1-0/+5
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11cxgb4vf: Configure queue based on resource and interrupt typeHariprasad Shenai1-71/+94
The Queue Set Configuration code was always reserving room for a Forwarded interrupt Queue even in the cases where we weren't using it. Figure out how many Ports and Queue Sets we can support. This depends on knowing our Virtual Function Resources and may be called a second time if we fall back from MSI-X to MSI Interrupt Mode. This change fixes that problem. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11cxgb4vf: Enable interrupts before we register our network devicesHariprasad Shenai1-25/+26
This avoids a race condition where a system that has network devices set up to be automatically configured and we get the first Port Link Status message from the firmware on the Asynchronous Firmware Event Queue before we've enabled interrupts. If that happens, we end up losing the interrupt and never realizing that the links has actually come up. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02cxgb4vf: Remove dead functions collect_netdev_[um]c_list_addrsHariprasad Shenai1-46/+0
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02cxgb4vf: Remove redundant adapter ready check during probeHariprasad Shenai1-10/+0
Function t4vf_wait_dev_ready() is already called in t4vf_prep_adapter(), no need to call it again in adap_init0(). Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18cxgb4vf: Use __dev_uc_sync/__dev_mc_sync to sync MAC addressHariprasad Shenai1-44/+72
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-22cxgb4/cxgb4vf: Update driver desc. to include Chelsio T6 adapterHariprasad Shenai1-1/+1
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-13cxgb4/cxgb4vf: Cleanup macros, add comments and add new MACROSHariprasad Shenai1-6/+7
Cleanup few MACROS left out in t4_hw.h to be consistent with the existing ones. Also replace few hardcoded values with MACROS. Also update comments for some code Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-19cxgb4/cxgb4vf/csiostor: Make PCI Device ID Tables be "const"Hariprasad Shenai1-1/+1
Make PCI Device ID Tables be "const" to move them out of the data segment and remove a redundant check on CH_PCI_DEVICE_ID_TABLE_DEFINE_BEGIN in t4_pci_id_tbl.h to guard the contents of the include file. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Conflicts: drivers/net/xen-netfront.c Minor overlapping changes in xen-netfront.c, mostly to do with some buffer management changes alongside the split of stats into TX and RX. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15cxgb4vf: Fix queue allocation for 40G adapterHariprasad Shenai1-1/+1
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13iw_cxgb4/cxgb4/cxgb4vf/cxgb4i/csiostor: Cleanup register defines/macros ↵Hariprasad Shenai1-1/+1
related to all other cpl messages This patch cleanups all other macros/register define related to CPL messages that are defined in t4_msg.h and the affected files Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13iw_cxgb4/cxgb4/cxgb4i: Cleanup register defines/MACROS related to CM CPL ↵Hariprasad Shenai1-1/+1
messages This patch cleanups all macros/register define related to connection management CPL messages that are defined in t4_msg.h and the affected files Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-06cxgb4/cxgb4vf/csiostor: Cleanup PL, XGMAC, SF and MC related register definesHariprasad Shenai1-1/+1
This patch cleanups all PL, XGMAC and SF related macros/register defines that are defined in t4_regs.h and the affected files Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-06cxgb4/cxgb4vf/csiostor: Cleanup SGE and PCI related register definesHariprasad Shenai1-6/+6
This patch cleansup remaining SGE related macros/register defines and all PCI related ones that are defined in t4_regs.h and the affected files. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-10 21:55:40 +0300