summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c
AgeCommit message (Collapse)AuthorFilesLines
2016-07-25cxgb4/cxgb4vf: Add link mode mask API to cxgb4 and cxgb4vfGanesh Goudar1-97/+179
Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-25cxgb4vf: Synchronize access to mailboxHariprasad Shenai1-0/+2
The issue comes when there are multiple threads attempting to use the mailbox facility at the same time. The issue is the for the Virtual Function Driver, the only way to get the Virtual Interface statistics is to issue mailbox commands to ask the firmware for the VI Stats. And, because the VI Stats command can only retrieve a smallish number of stats per mailbox command, we have to issue three mailbox commands in quick succession. When ethtool or netstat command to get interface stats and interface up/down is run in a loop for every 0.1 sec, we observed mailbox collisions. And out of the two commands one would fail with the present code, since we don't queue the second command. To overcome the above issue, added a queue to access the mailbox. Whenever a mailbox command is issued add it to the queue. If its at the head issue the mailbox command, else wait for the existing command to complete. Usually command takes less than a milli-second to complete. Also timeout from the loop, if the command under execution takes long time to run. In reality, the number of mailbox access collisions is going to be very rare since no one runs such abusive script. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-16cxgb4/cxgb4vf: Synchronize all MAC addressesHariprasad Shenai1-6/+2
Even if interface is in Promiscuous mode/Allmulti mode synchronize MAC addresses. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-29cxgb4vf: Add support to enable logging of firmware mailbox commands for VFHariprasad Shenai1-0/+112
Add new /sys/kernel/debug/ support to dump firmware mailbox commands and replies for debugging purpose. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-06cxgb4/cxgb4vf: Deprecate module parameter dflt_msg_enableHariprasad Shenai1-1/+2
Message level can be set through ethtool, so deprecate module parameter which is used to set the same. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11cxgb4vf: Set number of queues in pci probe onlyHariprasad Shenai1-4/+4
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11cxgb4vf: Add a couple more checks for invalid provisioning configurationsHariprasad Shenai1-0/+5
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11cxgb4vf: Configure queue based on resource and interrupt typeHariprasad Shenai1-71/+94
The Queue Set Configuration code was always reserving room for a Forwarded interrupt Queue even in the cases where we weren't using it. Figure out how many Ports and Queue Sets we can support. This depends on knowing our Virtual Function Resources and may be called a second time if we fall back from MSI-X to MSI Interrupt Mode. This change fixes that problem. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-11cxgb4vf: Enable interrupts before we register our network devicesHariprasad Shenai1-25/+26
This avoids a race condition where a system that has network devices set up to be automatically configured and we get the first Port Link Status message from the firmware on the Asynchronous Firmware Event Queue before we've enabled interrupts. If that happens, we end up losing the interrupt and never realizing that the links has actually come up. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02cxgb4vf: Remove dead functions collect_netdev_[um]c_list_addrsHariprasad Shenai1-46/+0
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02cxgb4vf: Remove redundant adapter ready check during probeHariprasad Shenai1-10/+0
Function t4vf_wait_dev_ready() is already called in t4vf_prep_adapter(), no need to call it again in adap_init0(). Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-18cxgb4vf: Use __dev_uc_sync/__dev_mc_sync to sync MAC addressHariprasad Shenai1-44/+72
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-22cxgb4/cxgb4vf: Update driver desc. to include Chelsio T6 adapterHariprasad Shenai1-1/+1
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-13cxgb4/cxgb4vf: Cleanup macros, add comments and add new MACROSHariprasad Shenai1-6/+7
Cleanup few MACROS left out in t4_hw.h to be consistent with the existing ones. Also replace few hardcoded values with MACROS. Also update comments for some code Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-19cxgb4/cxgb4vf/csiostor: Make PCI Device ID Tables be "const"Hariprasad Shenai1-1/+1
Make PCI Device ID Tables be "const" to move them out of the data segment and remove a redundant check on CH_PCI_DEVICE_ID_TABLE_DEFINE_BEGIN in t4_pci_id_tbl.h to guard the contents of the include file. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Conflicts: drivers/net/xen-netfront.c Minor overlapping changes in xen-netfront.c, mostly to do with some buffer management changes alongside the split of stats into TX and RX. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15cxgb4vf: Fix queue allocation for 40G adapterHariprasad Shenai1-1/+1
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13iw_cxgb4/cxgb4/cxgb4vf/cxgb4i/csiostor: Cleanup register defines/macros ↵Hariprasad Shenai1-1/+1
related to all other cpl messages This patch cleanups all other macros/register define related to CPL messages that are defined in t4_msg.h and the affected files Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-13iw_cxgb4/cxgb4/cxgb4i: Cleanup register defines/MACROS related to CM CPL ↵Hariprasad Shenai1-1/+1
messages This patch cleanups all macros/register define related to connection management CPL messages that are defined in t4_msg.h and the affected files Signed-off-by: Anish Bhatt <anish@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-06cxgb4/cxgb4vf/csiostor: Cleanup PL, XGMAC, SF and MC related register definesHariprasad Shenai1-1/+1
This patch cleanups all PL, XGMAC and SF related macros/register defines that are defined in t4_regs.h and the affected files Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-06cxgb4/cxgb4vf/csiostor: Cleanup SGE and PCI related register definesHariprasad Shenai1-6/+6
This patch cleansup remaining SGE related macros/register defines and all PCI related ones that are defined in t4_regs.h and the affected files. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-06RDMA/cxgb4/cxgb4vf/csiostor: Cleanup SGE register definesHariprasad Shenai1-14/+10
This patch cleanups all SGE related macros/register defines that are defined in t4_regs.h and the affected files. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-23cxgb4vf: Fix ethtool get_settings for VF driverHariprasad Shenai1-15/+127
Decode and display Port Type and Module Type for ethtool get_settings() call Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09cxgb4/cxgb4vf: Use new interfaces to calculate BAR2 SGE Queue Register addressesHariprasad Shenai1-12/+0
Use BAR2 Going To Sleep (GTS) for T5 and later. Use new BAR2 User Doorbells for T5 for both cxgb4 and cxgb4vf driver. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09cxgb4vf: Add and initialize some sge params for VF driverHariprasad Shenai1-0/+27
Add sge_vf_eq_qpp and sge_vf_iq_qpp to (struct sge_params), initialize sge_queues_per_page and sge_vf_qpp in t4vf_get_sge_params(), add new t4vf_prep_adapter() which initializes basic adapter parameters. Grab both SGE_EGRESS_QUEUES_PER_PAGE_VF and SGE_INGRESS_QUEUES_PER_PAGE_VF for VF Drivers since we need both to calculate the User Doorbell area offsets for Egress and Ingress Queues. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-25cxgb4/cxgb4vf/csiostor: Add T4/T5 PCI ID TableHariprasad Shenai1-61/+12
Add a new file t4_pci_id_tbl.h that contains T4/T5 PCI ID Table so that for all drivers that uses T4/T5 PCI functions changes can be done in one place. checkpatch.pl script reports following error, which if tried to fix ends up in compilation error. ERROR: Macros with complex values should be enclosed in parentheses +#define CH_PCI_DEVICE_ID_TABLE_DEFINE_END \ + { 0, } \ + } WARNING: added, moved or deleted file(s), does MAINTAINERS need updating? new file mode 100644 ERROR: Macros with complex values should be enclosed in parentheses +#define CH_PCI_ID_TABLE_FENTRY(devid) \ + CH_PCI_ID_TABLE_ENTRY((devid) | \ + ((CH_PCI_DEVICE_ID_FUNCTION) << 8)), \ + CH_PCI_ID_TABLE_ENTRY((devid) | \ + ((CH_PCI_DEVICE_ID_FUNCTION2) << 8)) ERROR: Macros with complex values should be enclosed in parentheses +#define CH_PCI_DEVICE_ID_TABLE_DEFINE_END { 0, } } ERROR: Macros with complex values should be enclosed in parentheses +#define CH_PCI_DEVICE_ID_TABLE_DEFINE_END { 0, } } Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-23RDMA/cxgb4/cxgb4vf/csiostor: Cleanup macros/register defines related to ↵Hariprasad Shenai1-8/+8
PCIE, RSS and FW This patch cleanups all PCIE, RSS & FW related macros/register defines that are defined in t4fw_api.h and the affected files. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-23RDMA/cxgb4/csiostor: Cleansup FW related macros/register defines for PF/VF ↵Hariprasad Shenai1-5/+5
and LDST This patch cleanups PF/VF and LDST related macros/register defines that are defined in t4fw_api.h and the affected files. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29cxgb4vf: Replace repetitive pci device ID's with right onesHariprasad Shenai1-8/+8
Replaced repetive Device ID's which got added in commit b961f9a48844ecf3 ("cxgb4vf: Remove superfluous "idx" parameter of CH_DEVICE() macro") Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-10cxgb4vf: Add 40G support for cxgb4vf driverHariprasad Shenai1-4/+8
Add 40G support for cxgb4vf driver. ethtool speed values are just numbers of megabits and there is no SPEED_40000 in ethtool speed values. To be consistent, use integer constants directly for all speeds. Use is_x_10g_port()("is 10Gb/s or higher") in cfg_queues() instead of is_10g_port() ("is exactly 10Gb/s"). Else we will end up using a single "Queue Set" on 40Gb/s adapters. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-29cxgb4/cxgb4vf: Add Devicde ID for two more adapterHariprasad Shenai1-0/+2
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-29cxgb4vf: Remove superfluous "idx" parameter of CH_DEVICE() macro.Hariprasad Shenai1-52/+52
Remove redundant idx parameter of CH_DEVICE() macro, its always zero. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-11cxgb4/cxgb4vf: Add device ID for new adapter and remove for dbg adapterHariprasad Shenai1-2/+1
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-12PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine1-1/+1
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-08-06cxgb4vf: Turn off SGE RX/TX Callback Timers and interrupts in PCI shutdown ↵Hariprasad Shenai1-14/+15
routine Need to turn off SGE RX/TX Callback Timers & interrupt in cxgb4vf PCI Shutdown routine in order to prevent crashes during reboot/poweroff when traffic is running. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-02cxgb4vf: Adds device ID for few more Chelsio T4 AdaptersHariprasad Shenai1-0/+9
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-14net: get rid of SET_ETHTOOL_OPSWilfried Klaebe1-1/+1
net: get rid of SET_ETHTOOL_OPS Dave Miller mentioned he'd like to see SET_ETHTOOL_OPS gone. This does that. Mostly done via coccinelle script: @@ struct ethtool_ops *ops; struct net_device *dev; @@ - SET_ETHTOOL_OPS(dev, ops); + dev->ethtool_ops = ops; Compile tested only, but I'd seriously wonder if this broke anything. Suggested-by: Dave Miller <davem@davemloft.net> Signed-off-by: Wilfried Klaebe <w-lkml@lebenslange-mailadresse.de> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-29cxgb4vf: Adds device Id for few more Chelsio adaptersHariprasad Shenai1-0/+8
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19cxgb4vf: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev1-18/+16
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Casey Leedom <leedom@chelsio.com> Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19cxgb4vf: Remove superfluous call to pci_disable_msix()Alexander Gordeev1-1/+0
There is no need to call pci_disable_msix() in case the previous call to pci_enable_msix() failed Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Casey Leedom <leedom@chelsio.com> Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-04cxgb4vf: added much cleaner implementation of is_t4()Hariprasad Shenai1-4/+11
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-22net: cxgb4vf: use DEFINE_PCI_DEVICE_TABLEJingoo Han1-1/+1
This macro is used to create a struct pci_device_id array. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18net: cxgb4vf: remove unnecessary pci_set_drvdata()Jingoo Han1-3/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-29cxgb4vf: Support CPL_SGE_EGR_UPDATEs encapsulated in a CPL_FW4_MSGVipul Pandya1-0/+25
Newer firmware can post CPL_SGE_EGR_UPDATE message encapsulated in a CPL_FW4_MSG as follows flit0 rss_header (if DropRSS == 0 in IQ context) flit1 CPL_FW4_MSG cpl flit2 rss_header w/opcode CPL_SGE_EGR_UPDATE flit3 CPL_SGE_EGR_UPDATE cpl So FW4_MSG CPLs with a newly created type of FW_TYPE_RSSCPL have the CPL_SGE_EGR_UPDATE CPL message in flit 2 of the FW4_MSG. Firmware can still post regular CPL_SGE_EGR_UPDATE messages, so the drivers need to handle both. This patch also writes a new parameter to firmware requesting encapsulated EGR_UPDATE. This allows firmware with this support to not break older drivers. Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19net: vlan: rename NETIF_F_HW_VLAN_* feature flags to NETIF_F_HW_VLAN_CTAG_*Patrick McHardy1-7/+8
Rename the hardware VLAN acceleration features to include "CTAG" to indicate that they only support CTAGs. Follow up patches will introduce 802.1ad server provider tagging (STAGs) and require the distinction for hardware not supporting acclerating both. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-14cxgb4vf: Add support for Chelsio T5 adapterSantosh Rastapur1-3/+32
Signed-off-by: Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-08chelsio: Use netdev_<level> and pr_<level>Joe Perches1-15/+8
Use more current logging styles. Convert printks to pr_<level> and printks with ("%s: ...", dev->name to netdev_<level>(dev, "... Add pr_fmt #defines where appropriate. Coalesce formats. Use pr_<level>_once where appropriate. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-07drivers/net: fix up function prototypes after __dev* removalsGreg Kroah-Hartman1-1/+1
The __dev* removal patches for the network drivers ended up messing up the function prototypes for a bunch of drivers. This patch fixes all of them back up to be properly aligned. Bonus is that this almost removes 100 lines of code, always a nice surprise. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03cxgb4vf: remove __dev* attributesBill Pemberton1-10/+10
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Casey Leedom <leedom@chelsio.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-06ethernet: Remove casts to same typeJoe Perches1-1/+1
Adding casts of objects to the same type is unnecessary and confusing for a human reader. For example, this cast: int y; int *p = (int *)&y; I used the coccinelle script below to find and remove these unnecessary casts. I manually removed the conversions this script produces of casts with __force, __iomem and __user. @@ type T; T *p; @@ - (T *)p + p A function in atl1e_main.c was passed a const pointer when it actually modified elements of the structure. Change the argument to a non-const pointer. A function in stmmac needed a __force to avoid a sparse warning. Added it. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-02 02:03:57 +0300