summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/cavium
AgeCommit message (Collapse)AuthorFilesLines
2015-12-09net: thunderx: Correctly distinguish between VF and LMAC countPavel Fedin1-21/+18
Commit bc69fdfc6c13 ("net: thunderx: Enable BGX LMAC's RX/TX only after VF is up") introduces lmac_cnt member and starts verifying VF number against it. This is plain wrong, and works only because currently we have hardcoded 1:1 mapping between VFs and LMACs, and in this case num_vf_en and lmac_cnt are always equal. However in future this may change, and the code will badly misbehave. The worst consequence of this is failure to deliver link status messages, causing VFs to go defunct because since commit 0b72a9a1060e ("net: thunderx: Switchon carrier only upon interface link up") VF will not fully bring itself up without it. This patch fixes the potential problem by doing VF number checks against the num_vf_en. Since lmac_cnt is not used anywhere else, it is removed. Additionally some duplicated code is factored out into nic_enable_vf() Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02net: thunderx: Enable BGX LMAC's RX/TX only after VF is upSunil Goutham3-3/+38
Enable or disable BGX LMAC's RX/TX based on corresponding VF's status. If otherwise, when multiple LMAC's physical link is up then packets from all LMAC's whose corresponding VF is not yet initialized will get forwarded to VF0. This is due to VNIC's default configuration where CPI, RSSI e.t.c point to VF0/QSET0/RQ0. This patch will prevent multiple copies of packets on VF0. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02net: thunderx: Switchon carrier only upon interface link upSunil Goutham3-4/+18
Call netif_carrier_on() only if interface's link is up. Switching this on upon IFF_UP by default, is causing issues with ethernet channel bonding in LACP mode. Initial NETDEV_CHANGE notification was being skipped. Also fixed some issues with link/speed/duplex reporting via ethtool. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02net: thunderx: Set CQ timer threshold properlySunil Goutham3-5/+4
Properly set CQ timer threshold and also set it to 2us. With previous incorrect settings it was set to 0.5us which is too less. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02net: thunderx: Wait for delayed work to finish before destroying itThanneeru Srinivasulu2-4/+2
While VNIC or BGX driver teardown, wait for already scheduled delayed work to finish before destroying it. Signed-off-by: Thanneeru Srinivasulu <tsrinivasulu@caviumnetworks.com> Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-02net: thunderx: Force to load octeon-mdio before bgx driver.Thanneeru Srinivasulu2-0/+4
Signed-off-by: Thanneeru Srinivasulu <tsrinivasulu@caviumnetworks.com> Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-17net: thunder: Check for driver data in nicvf_remove()Pavel Fedin1-5/+8
In some cases the crash is caused by nicvf_remove() being called from outside. For example, if we try to feed the device to vfio after the probe has failed for some reason. So, move the check to better place. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-16net: cavium: liquidio: constify pci_error_handlers structuresJulia Lawall1-1/+1
This pci_error_handlers structure is never modified, like all the other pci_error_handlers structures, so declare it as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-16net: thunder: Fix crash upon shutdown after failed probePavel Fedin1-0/+3
If device probe fails, driver remains bound to the PCI device. However, driver data has been reset to NULL. This causes crash upon dereferencing it in nicvf_remove() Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller4-15/+37
2015-10-27net: thunderx: add missing of_node_putJulia Lawall1-1/+3
for_each_child_of_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. A simplified version of the semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ local idexpression r.n; expression r,e; @@ for_each_child_of_node(r,n) { ... ( of_node_put(n); | e = n | + of_node_put(n); ? break; ) ... } ... when != n // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26net: thunderx: Incorporate pass2 silicon CPI index configuration changesThanneeru Srinivasulu2-6/+27
Add support for ThunderX pass2 CPI and MPI configuration changes. MPI_ALG is not enabled i.e MCAM parsing is disabled. Signed-off-by: Thanneeru Srinivasulu <tsrinivasulu@caviumnetworks.com> Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26net: thunderx: Rewrite silicon revision tests.David Daney1-4/+6
The test for pass-1 silicon was incorrect, it should be for all revisions less than 8. Also the revision is already present in the pci_dev, so there is no need to read and keep a private copy. Remove rev_id and code to read it from struct nicpf. Create new static inline function pass1_silicon() to be used to testing the silicon version. Use pass1_silicon() for revision checks, this will be more widely used in follow on patches. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26net: thunderx: Fix incorrect subsystem devid of VF on pass2 siliconSunil Goutham1-1/+1
Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-26net: thunderx: Remove PF soft reset.Sunil Goutham1-3/+0
In some silicon revisions, the soft reset clobbers PCI config space, so quit doing the reset. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Conflicts: net/ipv6/xfrm6_output.c net/openvswitch/flow_netlink.c net/openvswitch/vport-gre.c net/openvswitch/vport-vxlan.c net/openvswitch/vport.c net/openvswitch/vport.h The openvswitch conflicts were overlapping changes. One was the egress tunnel info fix in 'net' and the other was the vport ->send() op simplification in 'net-next'. The xfrm6_output.c conflicts was also a simplification overlapping a bug fix. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-22net: cavium: change NET_VENDOR_CAVIUM to boolAndreas Schwab1-1/+1
CONFIG_NET_VENDOR_CAVIUM is only used to hide/show config options and to include subdirectories in the build, so it doesn't make sense to make it tristate. Signed-off-by: Andreas Schwab <schwab@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16drivers/net: get rid of unnecessary initializations in .get_drvinfo()Ivan Vecera1-1/+0
Many drivers initialize uselessly n_priv_flags, n_stats, testinfo_len, eedump_len & regdump_len fields in their .get_drvinfo() ethtool op. It's not necessary as these fields is filled in ethtool_get_drvinfo(). v2: removed unused variable v3: removed another unused variable Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-10net: cavium: liquidio: use kzalloc in setup_glist()Rasmus Villemoes1-2/+1
We save a little .text and get rid of the sizeof(...) style inconsistency. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31net: thunderx: Support for internal loopback modeSunil Goutham5-0/+97
Support for setting VF's corresponding BGX LMAC in internal loopback mode. This mode can be used for verifying basic HW functionality such as packet I/O, RX checksum validation, CQ/RBDR interrupts, stats e.t.c. Useful when DUT has no external network connectivity. 'loopback' mode can be enabled or disabled via ethtool. Note: This feature is not supported when no of VFs enabled are morethan no of physical interfaces i.e active BGX LMACs Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31net: thunderx: Support for upto 96 queues for a VFSunil Goutham5-84/+505
This patch adds support for handling multiple qsets assigned to a single VF. There by increasing no of queues from earlier 8 to max no of CPUs in the system i.e 48 queues on a single node and 96 on dual node system. User doesn't have option to assign which Qsets/VFs to be merged. Upon request from VF, PF assigns next free Qsets as secondary qsets. To maintain current behavior no of queues is kept to 8 by default which can be increased via ethtool. If user wants to unbind NICVF driver from a secondary Qset then it should be done after tearing down primary VF's interface. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: Robert Richter <rrichter@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31net: thunderx: Rework interrupt handlingSunil Goutham3-72/+102
Rework interrupt handler to avoid checking IRQ affinity of CQ interrupts. Now separate handlers are registered for each IRQ including RBDR. Register interrupt handlers for only those which are being used. Add nicvf_dump_intr_status() and use it in irq handlers. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31net: thunderx: Support for HW VLAN strippingSunil Goutham4-7/+55
This patch configures HW to strip 802.1Q header if found in a receiving packet. The stripped VLAN ID and TCI information is passed on to software via CQE_RX. Also sets netdev's 'vlan_features' so that other HW offload features can be used for tagged packets. This offload feature can be enabled or disabled via ethtool. Network stack normally ignores RPS for 802.1Q packets and hence low throughput. With this offload enabled throughput for tagged packets will be almost same as normal packets. Note: This patch doesn't enable HW VLAN insertion for transmit packets. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31net: thunderx: Receive hashing HW offload supportSunil Goutham2-10/+39
Adding support for receive hashing HW offload by using RSS_ALG and RSS_TAG fields of CQE_RX descriptor. Also removed dependency on minimum receive queue count to configure RSS so that hash is always generated. This hash is used by RPS logic to distribute flows across multiple CPUs. Offload can be disabled via ethtool. Signed-off-by: Robert Richter <rrichter@cavium.com> Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31net: thunderx: mailboxes: remove code duplicationSunil Goutham2-36/+11
Use the nicvf_send_msg_to_pf() function in the mailbox code. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: Robert Richter <rrichter@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-31net: thunderx: Add receive error stats reporting via ethtoolSunil Goutham5-120/+103
Added ethtool support to dump receive packet error statistics reported in CQE. Also made some small fixes Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+0
Conflicts: drivers/net/ethernet/cavium/Kconfig The cavium conflict was overlapping dependency changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-11net, thunder, bgx: Add support to get MAC address from ACPI.David Daney1-1/+85
Currently there is no way to get the MAC address in a firmware independent manner, so set the MAC address of the device directly from the ACPI tables. The binding agrees with the proposed standard here: http://www.uefi.org/sites/default/files/resources/nic-request-v2.pdf Based on code from: Narinder Dhillon <ndhillon@cavium.com> Tomasz Nowicki <tomasz.nowicki@linaro.org> Robert Richter <rrichter@cavium.com> Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org> Signed-off-by: Robert Richter <rrichter@cavium.com> Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-11net: thunder: Factor out DT specific code in BGXRobert Richter1-13/+35
Separate DT code in preparation for follow-on ACPI integration. Based on code from: Tomasz Nowicki <tomasz.nowicki@linaro.org> Signed-off-by: Robert Richter <rrichter@cavium.com> Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07net: thunderx: remove effective "default y" from Kconfig if ARCH_THUNDER=yIan Campbell1-3/+0
As well as for kernels built only for ThunderX ARCH_THUNDERX is also enabled for kernels which support multiple platforms (such as distro kernels). Thus "default ARCH_THUNDER" is inappropriate. I believe default m is equally frowned upon, so remove the line completely rather than "default m if ARCH_THUNDER". Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Cc: Sunil Goutham <sgoutham@cavium.com> Cc: Robert Richter <rric@kernel.org> Cc: Derek Chickles <derek.chickles@caviumnetworks.com> Cc: Satanand Burla <satananda.burla@caviumnetworks.com> Cc: Felix Manlunas <felix.manlunas@caviumnetworks.com> Cc: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-arm-kernel@lists.infradead.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller6-37/+92
Conflicts: arch/s390/net/bpf_jit_comp.c drivers/net/ethernet/ti/netcp_ethss.c net/bridge/br_multicast.c net/ipv4/ip_fragment.c All four conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30net: thunderx: Fix for crash while BGX teardownThanneeru Srinivasulu1-1/+4
Cortina phy does not have kernel driver and we don't attach device with phy layer for intefaces like XFI, XLAUI etc, Hence check for interface type before calling disconnect. Signed-off-by: Thanneeru Srinivasulu <tsrinivasulu@caviumnetworks.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30net: thunderx: Add PCI driver shutdown routineSunil Goutham1-0/+6
Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30net: thunderx: Fix crash when changing rss with mutliple traffic flowsSunil Goutham1-4/+5
This fixes a crash when changing rss with multiple traffic flows. While interface teardown, disable tx queues after all NAPI threads are done. If done otherwise tx queues might be woken up inside NAPI if any CQE_TX are processed. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30net: thunderx: Set watchdog timeout valueSunil Goutham2-0/+10
If a txq (SQ) remains in stopped state after this timeout its considered as stuck and interface is reinited. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30net: thunderx: Wakeup TXQ only if CQE_TX are processedSunil Goutham3-15/+31
Previously TXQ is wakedup whenever napi is executed and irrespective of if any CQE_TX are processed or not. Added 'txq_stop' and 'txq_wake' counters to aid in debugging if there are any future issues. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30net: thunderx: Suppress alloc_pages() failure warningsSunil Goutham1-2/+4
Suppressing standard alloc_pages() warnings. Some kernel configs limit alloc size and the network driver may fail. Do not drop a kernel warning in this case, instead just drop a oneliner that the network driver could not be loaded since the buffer could not be allocated. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30net: thunderx: Fix TSO packet statisticSunil Goutham1-0/+1
Fixing TSO packages not being counted. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30net: thunderx: Fix memory leak when changing queue countSunil Goutham1-9/+14
Fix for memory leak when changing queue/channel count via ethtool Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30net: thunderx: Fix RQ_DROP miscalculationSunil Goutham1-3/+11
With earlier configured value sufficient number of CQEs are not being reserved for transmitted packets. Hence under heavy incoming traffic load, receive notifications will take away most of the CQ thus transmit notifications will be lost resulting in tx skbs not being freed. Finally SQ will be full and it will be stopped, watchdog timer will kick in. After this fix receive notifications will not take morethan half of CQ reserving the rest for transmit notifications. Also changed CQ & SQ sizes from 16k to 4k. This is also due to the receive notifications taking first half of CQ under heavy load and time taken by NAPI to clear transmit notifications will increase with higher queue sizes. Again results in SQ being stopped. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30net: thunderx: Fix memory leak while tearing down interfaceSunil Goutham2-3/+6
Fixed 'tso_hdrs' memory not being freed properly. Also fixed SQ skbuff maintenance issues. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30net: thunderx: Fix data integrity issues with LDWBSunil Goutham1-1/+1
Switching back to LDD transactions from LDWB. While transmitting packets out with LDWB transactions data integrity issues are seen very frequently. hence switching back to LDD. Signed-off-by: Sunil Goutham <sgoutham@cavium.com> Signed-off-by: Robert Richter <rrichter@cavium.com> Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-30net: thunderx: Select CONFIG_MDIO_OCTEON for ThunderX NICRadha Mohan Chintakuntla1-0/+2
The CONFIG_MDIO_OCTEON is required so that the ThunderX NIC driver can talk to the PHY drivers. Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-29net-Liquidio: Delete unnecessary checks before the function call "vfree"Markus Elfring3-13/+5
The vfree() function performs also input parameter validation. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-25cavium/liquidio: fix some error handling in lio_set_phys_id()Dan Carpenter1-2/+3
There was a missing assignment so the "if (ret)" on the next line is never true. Fixes: f21fb3ed364b ('Add support of Cavium Liquidio ethernet adapters') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-24net: Cavium: Fix MAC address setting in shutdown statePavel Fedin2-2/+13
This bug pops up with NetworkManager on Fedora 21. NetworkManager tends to stop the interface (nicvf_stop() is called) before changing settings. In stopped state MAC cannot be sent to a PF. However, when the interface is restarted (nicvf_open() is called), we ping the PF using NIC_MBOX_MSG_READY message, and the PF replies back with old MAC address, overriding what we had after MAC setting from userspace. As a result, we cannot set MAC address using NetworkManager. This patch introduces special tracking of MAC change in stopped state so that the correct new MAC address is sent to a PF when interface is reopen. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-21Modify Liquidio Kconfig for crc libRaghu Vatsavayi1-1/+1
Following patch contains changes in liquidio Kconfig for selecting LIBCRC32C. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-13Fix Cavium Liquidio build related errors and warningsRaghu Vatsavayi8-19/+26
1) Fixed following sparse warnings: lio_main.c:213:6: warning: symbol 'octeon_droq_bh' was not declared. Should it be static? lio_main.c:233:5: warning: symbol 'lio_wait_for_oq_pkts' was not declared. Should it be static? lio_main.c:3083:5: warning: symbol 'lio_nic_info' was not declared. Should it be static? lio_main.c:2618:16: warning: cast from restricted __be16 octeon_device.c:466:6: warning: symbol 'oct_set_config_info' was not declared. Should it be static? octeon_device.c:573:25: warning: cast to restricted __be32 octeon_device.c:582:29: warning: cast to restricted __be32 octeon_device.c:584:39: warning: cast to restricted __be32 octeon_device.c:594:13: warning: cast to restricted __be32 octeon_device.c:596:25: warning: cast to restricted __be32 octeon_device.c:613:25: warning: cast to restricted __be32 octeon_device.c:614:29: warning: cast to restricted __be64 octeon_device.c:615:29: warning: cast to restricted __be32 octeon_device.c:619:37: warning: cast to restricted __be32 octeon_device.c:623:33: warning: cast to restricted __be32 cn66xx_device.c:540:6: warning: symbol 'lio_cn6xxx_get_pcie_qlmport' was not declared. Should it be s octeon_mem_ops.c:181:16: warning: cast to restricted __be64 octeon_mem_ops.c:190:16: warning: cast to restricted __be32 octeon_mem_ops.c:196:17: warning: incorrect type in initializer 2) Fix build errors corresponding to vmalloc on linux-next 4.1. 3) Liquidio now supports 64 bit only, modified Kconfig accordingly. 4) Fix some code alignment issues based on kernel build warnings. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11Add support of Cavium Liquidio ethernet adaptersRaghu Vatsavayi29-12/+14446
Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-02net: thunderx: use GFP_KERNEL in thread contextAleksey Makarov1-1/+1
GFP_KERNEL should be used in the thread context Signed-off-by: Aleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-24 23:39:20 +0300