summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/cavium/liquidio/lio_main.c
AgeCommit message (Collapse)AuthorFilesLines
2017-10-13liquidio: fix timespec64_to_ns typoArnd Bergmann1-1/+1
While experimenting with changes to the timekeeping code, I ran into a build error in the liquidio driver: drivers/net/ethernet/cavium/liquidio/lio_main.c: In function 'liquidio_ptp_settime': drivers/net/ethernet/cavium/liquidio/lio_main.c:1850:22: error: passing argument 1 of 'timespec_to_ns' from incompatible pointer type [-Werror=incompatible-pointer-types] The driver had a type mismatch since it was first merged, but this never caused problems because it is only built on 64-bit architectures that define timespec and timespec64 to the same type. If we ever want to compile-test the driver on 32-bit or change the way that 64-bit timespec64 is defined, we need to fix it, so let's just do it now. Fixes: f21fb3ed364b ("Add support of Cavium Liquidio ethernet adapters") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24liquidio: change manner of detecting whether or not NIC firmware is loadedFelix Manlunas1-6/+0
In the NIC firmware, the 1-bit flag indicating "firmware is loaded" moved from SLI_SCRATCH_1 to SLI_SCRATCH_2 (these are Octeon general-purpose scratch registers). Make the PF driver conform to this change. Remove code that sets the "firmware is loaded" flag because it's now the firmware's job to do that. In the code that detects whether or not the firmware is loaded, don't just rely on checking the "firmware is loaded" flag because that may cause a rare false negative. Add code that deduces whether or not the firmware is loaded; that will never give a false negative. Also bump up driver version to match newer NIC firmware. Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-21liquidio: fix use of pf in pass-through mode in a virtual machineRick Farrington1-0/+2
Fix problem when PF is used in pass-through mode in a VM (w/embedded f/w). If host error reading PF num from CN23XX_PCIE_SRIOV_FDL reg, try to retrieve PF num from SLI_PKT(0)_INPUT_CONTROL (initialized by f/w). Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-19liquidio: remove support for deprecated f/w cmd OCTNET_CMD_RESET_PFRick Farrington1-9/+0
Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18liquidio: with embedded f/w, issue droq credits before enablementRick Farrington1-8/+12
1. Issue credits BEFORE enabling DROQ's; this prevents PKTPF_ERR interrupt. Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18liquidio: with embedded f/w, don't reload f/w, issue pf flr at exitRick Farrington1-24/+46
1. Add support for PF FLR when exiting (enables CORE_DRV_ACTIVE upon next driver init) 2. Skip some initialization (don't try to load f/w, activate consoles). Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-16liquidio: added support for ethtool --set-channels featureIntiyaz Basha1-13/+20
adding support for ethtool --set-channels feature Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-16liquidio: moved octeon_setup_interrupt to lio_core.cIntiyaz Basha1-163/+0
Moving common octeon_setup_interrupt to lio_core.c Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-16liquidio: moved liquidio_legacy_intr_handler to lio_core.cIntiyaz Basha1-56/+0
Moving liquidio_legacy_intr_handler to lio_core.c Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-16liquidio: moved liquidio_msix_intr_handler to lio_core.cIntiyaz Basha1-43/+0
Moving common liquidio_msix_intr_handler to lio_core.c Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15liquidio: fix issues with fw_type module parameterDerek Chickles1-3/+3
The fw_type module parameter isn't showing up in the /sys/module/liquidio/parameters directory. Fix it by setting the read permission bits for user, group, other in module_param_string(). Revise the description of fw_type. Initialize the fw_type static char array with the default value to conform to the module parameter description. Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15liquidio: added support for ethtool --set-ring featureIntiyaz Basha1-1/+5
added support for ethtool --set-ring feature Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15liquidio: moved liquidio_setup_io_queues to lio_core.cIntiyaz Basha1-108/+1
Moving common liquidio_setup_io_queues to lio_core.c Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15liquidio: moved liquidio_napi_poll to lio_core.cIntiyaz Basha1-52/+0
Moving common liquidio_napi_poll to lio_core.c Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15liquidio: moved liquidio_napi_drv_callback to lio_core.cIntiyaz Basha1-38/+0
Moving common liquidio_napi_drv_callback to lio_core.c Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15liquidio: moved liquidio_push_packet to lio_core.cIntiyaz Basha1-147/+0
Moving common liquidio_push_packet to lio_core.c Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15liquidio: moved octeon_setup_droq to lio_core.cIntiyaz Basha1-37/+0
Moving common octeon_setup_droq to lio_core.c Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15liquidio: moved update_txq_status to lio_core.cIntiyaz Basha1-34/+1
Moving common update_txq_status to lio_core.c Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-15liquidio: moved wait_for_pending_requests to octeon_network.hIntiyaz Basha1-26/+0
Moving common function wait_for_pending_requests to octeon_network.h Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-14liquidio: update debug console logging mechanismRick Farrington1-2/+42
- remove logging dependency upon global func octeon_console_debug_enabled() - abstract debug console logging using console structure (via function ptr) to allow for more flexible logging Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-12liquidio: moved ptp_enable to octeon_device structureIntiyaz Basha1-9/+10
ptp_enable was a global static variable. Moved this global variable to octeon_device structure and removed extra device id check. Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-10liquidio: napi cleanupIntiyaz Basha1-0/+15
Disable napi when interface is going down. Delete napi when destroying the interface. Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09liquidio: fix misspelled firmware image filenamesDerek Chickles1-4/+8
Fix misspelled firmware image filenames advertised via MODULE_FIRMWARE(). Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-07liquidio: moved console_bitmask module param to lio_main.cIntiyaz Basha1-0/+15
Moving PF module param console_bitmask to lio_main.c for consistency. Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-03liquidio: set sriov_totalvfs correctlyDerek Chickles1-0/+5
The file /sys/devices/pci000.../sriov_totalvfs is showing a wrong value. Fix it by calling pci_sriov_set_totalvfs() to set the total number of VFs available after calculations for the number of PF and VF queues are made. Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-20liquidio: lio_main: remove unnecessary static in setup_io_queues()Gustavo A. R. Silva1-2/+2
Remove unnecessary static on local variables cpu_id_modulus and cpu_id. Such variables are initialized before being used, on every execution path throughout the function. The static has no benefit and, removing it reduces the object file size. This issue was detected using Coccinelle and the following semantic patch: @bad exists@ position p; identifier x; type T; @@ static T x@p; ... x = <+...x...+> @@ identifier x; expression e; type T; position p != bad.p; @@ -static T x@p; ... when != x when strict ?x = e; In the following log you can see a significant difference in the object file size. Also, there is a significant difference in the bss segment. This log is the output of the size command, before and after the code change: before: text data bss dec hex filename 78689 15272 27808 121769 1dba9 drivers/net/ethernet/cavium/liquidio/lio_main.o after: text data bss dec hex filename 78667 15128 27680 121475 1da83 drivers/net/ethernet/cavium/liquidio/lio_main.o Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-19liquidio: replace info-pointer mode with buffer-pointer-only modePrasad Kanneganti1-3/+4
Each Octeon output ring can DMA packets to host memory in two modes: info- pointer mode and buffer-pointer-only mode. In info-pointer mode, Octeon takes two buffer pointers for each packet and places the length of the packet along with specified number of bytes from the beginning of the packet into one buffer and the rest of the packet in a separate buffer. In buffer-pointer-only mode, Octeon takes single buffer pointer and places the length of the packet at the beginning of the buffer followed by the packet data. This patch switches all Octeon output rings from info-pointer mode to buffer-pointer-only mode. This results in fewer DMA setups and cache line snoops. Signed-off-by: Prasad Kanneganti <pkanneganti@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Satanand Burla <satananda.burla@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-19liquidio: implement vlan filter enable and disablePrasad Kanneganti1-6/+22
Add implementation to support ethtool -K ethX rx-vlan-filter on/off. Rename OCTNET_CMD_ENABLE_VLAN_FILTER command to OCTNET_CMD_VLAN_FILTER_CTL and add OCTNET_CMD_VLAN_FILTER_ENABLE and OCTNET_CMD_VLAN_FILTER_DISABLE parameters so that it can be used to enable or disable the filter. Signed-off-by: Prasad Kanneganti <prasad.kanneganti@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21net: ethernet: update drivers to handle HWTSTAMP_FILTER_NTP_ALLMiroslav Lichvar1-0/+1
Include HWTSTAMP_FILTER_NTP_ALL in net_hwtstamp_validate() as a valid filter and update drivers which can timestamp all packets, or which explicitly list unsupported filters instead of using a default case, to handle the filter. CC: Richard Cochran <richardcochran@gmail.com> CC: Willem de Bruijn <willemb@google.com> Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17liquidio: fix PF falsely indicating success at setting MAC address of a ↵Felix Manlunas1-0/+3
nonexistent VF In the function assigned to .ndo_set_vf_mac, check the validity of the vfidx argument before proceeding to tell the firmware to set the VF MAC address. Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17liquidio: fix insmod failure when multiple NICs are plugged inRick Farrington1-4/+17
When multiple liquidio NICs are plugged in, the first insmod of the PF driver succeeds. But after an rmmod, a subsequent insmod fails. Reason is during rmmod, the PF driver resets the Octeon of only one of the NICs; it neglects to reset the Octeons of the other NICs. Fix the insmod failure by adding the missing Octeon resets at rmmod. Keep a per-NIC refcount that indicates the number of active PFs in a given NIC. When the refcount goes to zero, then reset the Octeon of that NIC. Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-08liquidio: fix VF incorrectly indicating that it successfully set its VLANFelix Manlunas1-0/+4
For security reasons, NIC firmware does not allow VF to set its VLAN if PF set it already. Firmware allows VF to set its VLAN if PF did not set it. After the VF instructs the firmware to set the VLAN, VF always indicates (via return 0) that the operation is successful--even for the times when it isn't. Put in a mechanism for the VF's set VLAN function to receive the firmware response code, then make that function return -EPERM if the firmware forbids the operation. Make that mechanism available for other functions that may, in the future, be interested in receiving the response code from the firmware. That mechanism involves adding new fields to struct octnic_ctrl_pkt, so make all users of struct octnic_ctrl_pkt initialize the struct to zero before using it; otherwise, the mechanism might act on uninitialized garbage. Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-06liquidio: fix Octeon core watchdog timeout false alarmFelix Manlunas1-73/+105
Detection of watchdog timeout of Octeon cores is flawed and susceptible to false alarms. Refactor by removing the detection code, and in its place, leverage existing code that monitors for an indication from the NIC firmware that an Octeon core crashed; expand the meaning of the indication to "an Octeon core crashed or its watchdog timer expired". Detection of watchdog timeout is now delegated to an exception handler in the NIC firmware; this is free of false alarms. Also if there's an Octeon core crash or watchdog timeout: (1) Disable VF Ethernet links. (2) Decrement the module refcount by an amount equal to the number of active VFs of the NIC whose Octeon core crashed or had a watchdog timeout. The refcount will continue to reflect the active VFs of other liquidio NIC(s) (if present) whose Octeon cores are faultless. Item (2) is needed to avoid the case of not being able to unload the driver because the module refcount is stuck at some non-zero number. There is code that, in normal cases, decrements the refcount upon receiving a message from the firmware that a VF driver was unloaded. But in exceptional cases like an Octeon core crash or watchdog timeout, arrival of that particular message from the firmware might be unreliable. That normal case code is changed to not touch the refcount in the exceptional case to avoid contention (over the refcount) with the liquidio_watchdog kernel thread who will carry out item (2). Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-30drivers: add explicit interrupt.h includesFlorian Westphal1-0/+1
These files all use functions declared in interrupt.h, but currently rely on implicit inclusion of this file (via netns/xfrm.h). That won't work anymore when the flow cache is removed so include that header where needed. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-29liquidio: refactor interrupt moderation codePrasad Kanneganti1-17/+0
Refactor interrupt moderation code for flexibility because parameters are different for 10G and 25G cards. Currently parameters (for 10G only) come from macros compiled-in to the PF and VF drivers; fix it so that parameters suitable for the card (10G or 25G) come from the NIC firmware via response to a command. Also bump up driver version to 1.5.1 to match newer NIC firmware version. Signed-off-by: Prasad Kanneganti <prasad.kanneganti@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24liquidio: do not reset Octeon if NIC firmware was preloadedFelix Manlunas1-13/+32
The PF driver is incorrectly resetting Octeon when the module parameter "fw_type=none" is there. "fw_type=none" means the PF should not load any firmware to the NIC because Octeon is already running preloaded firmware. Fix it by putting an if (fw_type != none) around the reset code. Because the Octeon reset is now conditionally gone, when unloading the driver, conditionally send the RESET_PF command to the firmware who will then free up PF-related data structures. Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Satanand Burla <satananda.burla@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-23liquidio: fix tx completions in napi pollVSR Burru1-9/+11
If there are no egress packets pending, then don't look for tx completions in napi poll. Also, fix broken tx queue wakeup logic. Signed-off-by: VSR Burru <veerasenareddy.burru@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Satanand Burla <satananda.burla@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-23liquidio: allocate RX buffers in OOM conditions in PF and VFSatanand Burla1-0/+5
Add workqueue that is periodically run to try to allocate RX buffers in OOM conditions in PF and VF. Signed-off-by: Satanand Burla <satananda.burla@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22liquidio: fix Coverity scan errorsFelix Manlunas1-1/+2
Fix Coverity scan errors by not dereferencing lio->glists_dma_base pointer if it's NULL. See http://marc.info/?l=linux-netdev&m=149002294305614&w=2 Reported-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: VSR Burru <veerasenareddy.burru@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22liquidio: fix for vf mac addr command sent to nic firmwareRick Farrington1-1/+2
Change to support host<->firmware command return value. Fix for vf mac addr state command. 1. Added support for firmware commands to return a value: - previously, the returned code overlapped with host codes, thus commands were only returning 0 (success) or -1 (interpreted as timeout) - per 'response_manager.h', the error codes are split into two fields (major/minor) now, firmware commands are grouped into their own 'major' group, separate from the host's 'major' group, which allow f/w commands to return any 16-bit value 2. The command to set vf mac addr was logging a success message even if command failed. Now command uses a callback function to log the status message. 3. The command to set vf mac addr was not logging a message when set via the host 'ip' command. Now, the callback function will log an appropriate message. Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Satanand Burla <satananda.burla@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22liquidio: add debug error messages to report command timeoutRick Farrington1-2/+2
Add timeout error message in lio_process_ordered_list(). Add host failure status in existing error message in if_cfg_callback(). Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-22liquidio: remove duplicate codeSatanand Burla1-36/+0
Remove code duplicated in PF and VF; define that code once only in a common header file included by PF and VF. Signed-off-by: Satanand Burla <satananda.burla@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-17liquidio: use meaningful names for IRQsRick Farrington1-11/+61
All IRQs owned by the PF and VF drivers share the same nondescript name "octeon"; this makes it difficult to setup interrupt affinity. Change the IRQ names to reflect their specific purpose: LiquidIO<id>-<func>-<type>-<queue pair num> Examples: LiquidIO0-pf0-rxtx-3 LiquidIO1-vf1-rxtx-0 LiquidIO0-pf0-aux We cannot use netdev->name for naming the IRQs because: 1. Early during init, the PF and VF drivers require interrupts to send/receive control data from the NIC firmware; so the PF and VF must request IRQs long before the netdev struct is registered. 2. The IRQ name can only be specified at the time it is requested. It cannot be changed after that. Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Satanand Burla <satananda.burla@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-55/+55
Conflicts: drivers/net/ethernet/broadcom/genet/bcmgenet.c net/core/sock.c Conflicts were overlapping changes in bcmgenet and the lockdep handling of sockets. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-13liquidio: optimize DMA in NUMA systemsVSR Burru1-1/+1
Optimize DMA in NUMA systems by allocating memory from NUMA node that NIC is plugged in to; DMA will no longer cross NUMA nodes. If NIC IRQs are pinned to a local CPU, that CPU's access to the DMA'd data is also optimized. Signed-off-by: VSR Burru <veerasenareddy.burru@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: Satanand Burla <satananda.burla@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-10liquidio: add support for XPSRick Farrington1-0/+9
Add support for XPS. Signed-off-by: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Satanand Burla <satananda.burla@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-10liquidio: improve UDP TX performanceVSR Burru1-55/+55
Improve UDP TX performance by: * reducing the ring size from 2K to 512 * replacing the numerous streaming DMA allocations for info buffers and gather lists with one large consistent DMA allocation per ring BQL is not effective here. We reduced the ring size because there is heavy overhead with dma_map_single every so often. With iommu=on, dma_map_single in PF Tx data path was taking longer time (~700usec) for every ~250 packets. Debugged intel_iommu code, and found that PF driver is utilizing too many static IO virtual address mapping entries (for gather list entries and info buffers): about 100K entries for two PF's each using 8 rings. Also, finding an empty entry (in rbtree of device domain's iova mapping in kernel) during Tx path becomes a bottleneck every so often; the loop to find the empty entry goes through over 40K iterations; this is too costly and was the major overhead. Overhead is low when this loop quits quickly. Netperf benchmark numbers before and after patch: PF UDP TX +--------+--------+------------+------------+---------+ | | | Before | After | | | Number | | Patch | Patch | | | of | Packet | Throughput | Throughput | Percent | | Flows | Size | (Gbps) | (Gbps) | Change | +--------+--------+------------+------------+---------+ | | 360 | 0.52 | 0.93 | +78.9 | | 1 | 1024 | 1.62 | 2.84 | +75.3 | | | 1518 | 2.44 | 4.21 | +72.5 | +--------+--------+------------+------------+---------+ | | 360 | 0.45 | 1.59 | +253.3 | | 4 | 1024 | 1.34 | 5.48 | +308.9 | | | 1518 | 2.27 | 8.31 | +266.1 | +--------+--------+------------+------------+---------+ | | 360 | 0.40 | 1.61 | +302.5 | | 8 | 1024 | 1.64 | 4.24 | +158.5 | | | 1518 | 2.87 | 6.52 | +127.2 | +--------+--------+------------+------------+---------+ VF UDP TX +--------+--------+------------+------------+---------+ | | | Before | After | | | Number | | Patch | Patch | | | of | Packet | Throughput | Throughput | Percent | | Flows | Size | (Gbps) | (Gbps) | Change | +--------+--------+------------+------------+---------+ | | 360 | 1.28 | 1.49 | +16.4 | | 1 | 1024 | 4.44 | 4.39 | -1.1 | | | 1518 | 6.08 | 6.51 | +7.1 | +--------+--------+------------+------------+---------+ | | 360 | 2.35 | 2.35 | 0.0 | | 4 | 1024 | 6.41 | 8.07 | +25.9 | | | 1518 | 9.56 | 9.54 | -0.2 | +--------+--------+------------+------------+---------+ | | 360 | 3.41 | 3.65 | +7.0 | | 8 | 1024 | 9.35 | 9.34 | -0.1 | | | 1518 | 9.56 | 9.57 | +0.1 | +--------+--------+------------+------------+---------+ Signed-off-by: VSR Burru <veerasenareddy.burru@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-10net: liquidio: fix build errors when linux/phy*.h is removed from net/dsa.hRussell King1-0/+1
drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:30: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:30: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:30: error: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:30: error: function declaration isn't a prototype drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:31: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:31: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:31: error: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:31: error: function declaration isn't a prototype drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:32: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:32: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:32: error: type defaults to 'int' in declaration of 'MODULE_LICENSE' drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:32: error: function declaration isn't a prototype drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:33: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:33: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:33: error: type defaults to 'int' in declaration of 'MODULE_VERSION' drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:33: error: function declaration isn't a prototype drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:36: error: expected ')' before 'int' drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:37: error: expected ')' before string constant drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:325: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:325: error: type defaults to 'int' in declaration of 'MODULE_DEVICE_TABLE' drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:325: warning: parameter names (without types) in function declaration drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:3250: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:3250: error: type defaults to 'int' in declaration of 'module_init' drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:3250: warning: parameter names (without types) in function declaration drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:3251: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:3251: error: type defaults to 'int' in declaration of 'module_exit' drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:3251: warning: parameter names (without types) in function declaration drivers/net/ethernet/cavium/liquidio/lio_main.c:36: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/cavium/liquidio/lio_main.c:36: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_main.c:36: error: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/net/ethernet/cavium/liquidio/lio_main.c:36: error: function declaration isn't a prototype drivers/net/ethernet/cavium/liquidio/lio_main.c:37: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/cavium/liquidio/lio_main.c:37: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_main.c:37: error: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' drivers/net/ethernet/cavium/liquidio/lio_main.c:37: error: function declaration isn't a prototype drivers/net/ethernet/cavium/liquidio/lio_main.c:38: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/cavium/liquidio/lio_main.c:38: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_main.c:38: error: type defaults to 'int' in declaration of 'MODULE_LICENSE' drivers/net/ethernet/cavium/liquidio/lio_main.c:38: error: function declaration isn't a prototype drivers/net/ethernet/cavium/liquidio/lio_main.c:39: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/cavium/liquidio/lio_main.c:39: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_main.c:39: error: type defaults to 'int' in declaration of 'MODULE_VERSION' drivers/net/ethernet/cavium/liquidio/lio_main.c:39: error: function declaration isn't a prototype drivers/net/ethernet/cavium/liquidio/lio_main.c:40: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/cavium/liquidio/lio_main.c:40: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_main.c:40: error: type defaults to 'int' in declaration of 'MODULE_FIRMWARE' drivers/net/ethernet/cavium/liquidio/lio_main.c:40: error: function declaration isn't a prototype drivers/net/ethernet/cavium/liquidio/lio_main.c:41: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/cavium/liquidio/lio_main.c:41: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_main.c:41: error: type defaults to 'int' in declaration of 'MODULE_FIRMWARE' drivers/net/ethernet/cavium/liquidio/lio_main.c:41: error: function declaration isn't a prototype drivers/net/ethernet/cavium/liquidio/lio_main.c:42: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/cavium/liquidio/lio_main.c:42: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_main.c:42: error: type defaults to 'int' in declaration of 'MODULE_FIRMWARE' drivers/net/ethernet/cavium/liquidio/lio_main.c:42: error: function declaration isn't a prototype drivers/net/ethernet/cavium/liquidio/lio_main.c:43: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/cavium/liquidio/lio_main.c:43: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_main.c:43: error: type defaults to 'int' in declaration of 'MODULE_FIRMWARE' drivers/net/ethernet/cavium/liquidio/lio_main.c:43: error: function declaration isn't a prototype drivers/net/ethernet/cavium/liquidio/lio_main.c:46: error: expected ')' before 'int' drivers/net/ethernet/cavium/liquidio/lio_main.c:48: error: expected ')' before string constant drivers/net/ethernet/cavium/liquidio/lio_main.c:53: error: expected ')' before 'int' drivers/net/ethernet/cavium/liquidio/lio_main.c:54: error: expected ')' before string constant drivers/net/ethernet/cavium/liquidio/lio_main.c:57: error: expected ')' before 'sizeof' drivers/net/ethernet/cavium/liquidio/lio_main.c:58: error: expected ')' before string constant drivers/net/ethernet/cavium/liquidio/lio_main.c:498: warning: data definitionhas no type or storage class drivers/net/ethernet/cavium/liquidio/lio_main.c:498: error: type defaults to 'int' in declaration of 'MODULE_DEVICE_TABLE' drivers/net/ethernet/cavium/liquidio/lio_main.c:498: warning: parameter names (without types) in function declaration drivers/net/ethernet/cavium/liquidio/lio_main.c: In function 'octeon_recv_vf_drv_notice': drivers/net/ethernet/cavium/liquidio/lio_main.c:4393: error: implicit declaration of function 'try_module_get' drivers/net/ethernet/cavium/liquidio/lio_main.c:4400: error: implicit declaration of function 'module_put' drivers/net/ethernet/cavium/liquidio/lio_main.c: At top level: drivers/net/ethernet/cavium/liquidio/lio_main.c:4670: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_main.c:4670: error: type defaults to 'int' in declaration of 'module_init' drivers/net/ethernet/cavium/liquidio/lio_main.c:4670: warning: parameter names (without types) in function declaration drivers/net/ethernet/cavium/liquidio/lio_main.c:4671: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_main.c:4671: error: type defaults to 'int' in declaration of 'module_exit' drivers/net/ethernet/cavium/liquidio/lio_main.c:4671: warning: parameter names (without types) in function declaration Add linux/module.h to both these files. drivers/net/ethernet/cavium/liquidio/octeon_console.c:40:31: error: expected ')' before 'int' drivers/net/ethernet/cavium/liquidio/octeon_console.c:42:4: error: expected ')' before string constant Add linux/moduleparam.h to this file. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07liquidio: do not dereference pointer if it's NULLFelix Manlunas1-1/+1
Fix smatch errors by not dereferencing iq pointer if it's NULL. See http://marc.info/?l=kernel-janitors&m=148637299004834&w=2 Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01liquidio: fix for iq and droq cnts going negativeSatanand Burla1-1/+5
Flush the mmio writes before releasing spin locks. if the maintained counts get too high > 2M force writeback of the counts to clear them Signed-off-by: Satanand Burla <satananda.burla@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-30 02:13:31 +0300