summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/cadence
AgeCommit message (Collapse)AuthorFilesLines
2014-03-06net: macb: DMA-unmap full rx-bufferSoren Brinkmann1-1/+1
When allocating RX buffers a fixed size is used, while freeing is based on actually received bytes, resulting in the following kernel warning when CONFIG_DMA_API_DEBUG is enabled: WARNING: CPU: 0 PID: 0 at lib/dma-debug.c:1051 check_unmap+0x258/0x894() macb e000b000.ethernet: DMA-API: device driver frees DMA memory with different size [device address=0x000000002d170040] [map size=1536 bytes] [unmap size=60 bytes] Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.14.0-rc3-xilinx-00220-g49f84081ce4f #65 [<c001516c>] (unwind_backtrace) from [<c0011df8>] (show_stack+0x10/0x14) [<c0011df8>] (show_stack) from [<c03c775c>] (dump_stack+0x7c/0xc8) [<c03c775c>] (dump_stack) from [<c00245cc>] (warn_slowpath_common+0x60/0x84) [<c00245cc>] (warn_slowpath_common) from [<c0024670>] (warn_slowpath_fmt+0x2c/0x3c) [<c0024670>] (warn_slowpath_fmt) from [<c0227d44>] (check_unmap+0x258/0x894) [<c0227d44>] (check_unmap) from [<c0228588>] (debug_dma_unmap_page+0x64/0x70) [<c0228588>] (debug_dma_unmap_page) from [<c02ab78c>] (gem_rx+0x118/0x170) [<c02ab78c>] (gem_rx) from [<c02ac4d4>] (macb_poll+0x24/0x94) [<c02ac4d4>] (macb_poll) from [<c031222c>] (net_rx_action+0x6c/0x188) [<c031222c>] (net_rx_action) from [<c0028a28>] (__do_softirq+0x108/0x280) [<c0028a28>] (__do_softirq) from [<c0028e8c>] (irq_exit+0x84/0xf8) [<c0028e8c>] (irq_exit) from [<c000f360>] (handle_IRQ+0x68/0x8c) [<c000f360>] (handle_IRQ) from [<c0008528>] (gic_handle_irq+0x3c/0x60) [<c0008528>] (gic_handle_irq) from [<c0012904>] (__irq_svc+0x44/0x78) Exception stack(0xc056df20 to 0xc056df68) df20: 00000001 c0577430 00000000 c0577430 04ce8e0d 00000002 edfce238 00000000 df40: 04e20f78 00000002 c05981f4 00000000 00000008 c056df68 c0064008 c02d7658 df60: 20000013 ffffffff [<c0012904>] (__irq_svc) from [<c02d7658>] (cpuidle_enter_state+0x54/0xf8) [<c02d7658>] (cpuidle_enter_state) from [<c02d77dc>] (cpuidle_idle_call+0xe0/0x138) [<c02d77dc>] (cpuidle_idle_call) from [<c000f660>] (arch_cpu_idle+0x8/0x3c) [<c000f660>] (arch_cpu_idle) from [<c006bec4>] (cpu_startup_entry+0xbc/0x124) [<c006bec4>] (cpu_startup_entry) from [<c053daec>] (start_kernel+0x350/0x3b0) ---[ end trace d5fdc38641bd3a11 ]--- Mapped at: [<c0227184>] debug_dma_map_page+0x48/0x11c [<c02ab32c>] gem_rx_refill+0x154/0x1f8 [<c02ac7b4>] macb_open+0x270/0x3e0 [<c03152e0>] __dev_open+0x7c/0xfc [<c031554c>] __dev_change_flags+0x8c/0x140 Fixing this by passing the same size which is passed during mapping the memory to the unmap function as well. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Reviewed-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-06net: macb: Check DMA mappings for errorSoren Brinkmann1-2/+12
With CONFIG_DMA_API_DEBUG enabled the following warning is printed: WARNING: CPU: 0 PID: 619 at lib/dma-debug.c:1101 check_unmap+0x758/0x894() macb e000b000.ethernet: DMA-API: device driver failed to check map error[device address=0x000000002d171c02] [size=322 bytes] [mapped as single] Modules linked in: CPU: 0 PID: 619 Comm: udhcpc Not tainted 3.14.0-rc3-xilinx-00219-gd158fc7f36a2 #63 [<c001516c>] (unwind_backtrace) from [<c0011df8>] (show_stack+0x10/0x14) [<c0011df8>] (show_stack) from [<c03c7714>] (dump_stack+0x7c/0xc8) [<c03c7714>] (dump_stack) from [<c00245cc>] (warn_slowpath_common+0x60/0x84) [<c00245cc>] (warn_slowpath_common) from [<c0024670>] (warn_slowpath_fmt+0x2c/0x3c) [<c0024670>] (warn_slowpath_fmt) from [<c0228244>] (check_unmap+0x758/0x894) [<c0228244>] (check_unmap) from [<c0228588>] (debug_dma_unmap_page+0x64/0x70) [<c0228588>] (debug_dma_unmap_page) from [<c02aba64>] (macb_interrupt+0x1f8/0x2dc) [<c02aba64>] (macb_interrupt) from [<c006c6e4>] (handle_irq_event_percpu+0x2c/0x178) [<c006c6e4>] (handle_irq_event_percpu) from [<c006c86c>] (handle_irq_event+0x3c/0x5c) [<c006c86c>] (handle_irq_event) from [<c006f548>] (handle_fasteoi_irq+0xb8/0x100) [<c006f548>] (handle_fasteoi_irq) from [<c006c148>] (generic_handle_irq+0x20/0x30) [<c006c148>] (generic_handle_irq) from [<c000f35c>] (handle_IRQ+0x64/0x8c) [<c000f35c>] (handle_IRQ) from [<c0008528>] (gic_handle_irq+0x3c/0x60) [<c0008528>] (gic_handle_irq) from [<c0012904>] (__irq_svc+0x44/0x78) Exception stack(0xed197f60 to 0xed197fa8) 7f60: 00000134 60000013 bd94362e bd94362e be96b37c 00000014 fffffd72 00000122 7f80: c000ebe4 ed196000 00000000 00000011 c032c0d8 ed197fa8 c0064008 c000ea20 7fa0: 60000013 ffffffff [<c0012904>] (__irq_svc) from [<c000ea20>] (ret_fast_syscall+0x0/0x48) ---[ end trace 478f921d0d542d1e ]--- Mapped at: [<c0227184>] debug_dma_map_page+0x48/0x11c [<c02aaca0>] macb_start_xmit+0x184/0x2a8 [<c03143c0>] dev_hard_start_xmit+0x334/0x470 [<c032c09c>] sch_direct_xmit+0x78/0x2f8 [<c0314814>] __dev_queue_xmit+0x318/0x708 due to missing checks of the dma mapping. Add the appropriate checks to fix this. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Reviewed-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11net: macb: Fix build warningSoren Brinkmann1-1/+1
When adjusting the link speed, the target frequency is determined by a 'swith (LINK_SPEED)' statement, that assigns the target rate only for valid and expected LINK_SPEED values. This incomplete switch statement leads to the following build warning: drivers/net/ethernet/cadence/macb.c: In function 'macb_handle_link_change': >> drivers/net/ethernet/cadence/macb.c:241:14: warning: 'rate' may be used uninitialized in this function [-Wmaybe-uninitialized] netdev_warn(dev, "unable to generate target frequency: %ld Hz\n", ^ drivers/net/ethernet/cadence/macb.c:215:13: note: 'rate' was declared here long ferr, rate, rate_rounded; Fixing this by bailing out of that function in the switch's default case before the rate variable is used. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11net: macb: Adjust tx_clk when link speed changesSoren Brinkmann2-0/+65
Adjust the ethernet clock according to the negotiated link speed. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11net: macb: Use devm_request_irq()Soren Brinkmann1-5/+3
Use the device managed interface to request the IRQ, simplifying error paths. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11net: macb: Use devm_ioremap()Soren Brinkmann1-5/+3
Use the device managed version of ioremap to remap IO memory, simplifying error paths. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11net: macb: Migrate to devm clock interfaceSoren Brinkmann1-12/+20
Migrate to using the device managed interface for clocks and clean up the associated error paths. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-11net: macb: Migrate to dev_pm_opsSoren Brinkmann1-7/+7
Migrate the suspend/resume functions to use the dev_pm_ops PM interface. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-13Remove GENERIC_HARDIRQ config optionMartin Schwidefsky1-1/+1
After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-08-31net: macb: use dev_get_platdata()Jingoo Han1-3/+3
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-31net: at91_ether: use dev_get_platdata()Jingoo Han1-1/+1
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-29net/cadence/macb: fix invalid 0 return if no phy is discovered on mii initBoris BREZILLON1-3/+3
Replace misleading -1 (-EPERM) by a more appropriate return code (-ENXIO) in macb_mii_probe function. Save macb_mii_probe return before branching to err_out_unregister to avoid erronous 0 return. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-27net/cadence/macb: add support for dt phy definitionBoris BREZILLON1-7/+34
The macb driver only handle PHY description through platform_data (macb_platform_data). Thus, when using dt you cannot define phy properties like phy address or phy irq pin. This patch makes use of the of_mdiobus_register to add support for phy device definition using dt. A fallback to the autoscan procedure is added in case there is no phy devices defined in dt. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-12drivers/net/ethernet/cadence: don't use devm_pinctrl_get_select_default() in ↵Wolfram Sang1-11/+0
probe Since commit ab78029 (drivers/pinctrl: grab default handles from device core), we can rely on device core for setting the default pins. Compile tested only. Acked-by: Linus Walleij <linus.walleij@linaro.org> (personally at LCE13) Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-09net/cadence/macb: fix bug/typo in extracting gem_irq_read_clear bitJongsung Kim1-1/+1
Signed-off-by: Jongsung Kim <neidhard.kim@lge.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-20at91_ether: Do not select NET_COREBen Hutchings1-1/+0
This has no dependency on any of the drivers under NET_CORE. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-07net/macb: change RX path for GEMNicolas Ferre2-49/+272
GEM is able to adapt its DMA buffer size, so change the RX path to take advantage of this possibility and remove all kind of memcpy in this path. This modification introduces function pointers for managing differences between MACB and GEM adapter type. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-07net/macb: increase RX buffer size for GEMNicolas Ferre2-8/+38
Macb Ethernet controller requires a RX buffer of 128 bytes. It is highly sub-optimal for Gigabit-capable GEM that is able to use a bigger DMA buffer. Change this constant and associated macros with data stored in the private structure. RX DMA buffer size has to be multiple of 64 bytes as indicated in DMA Configuration Register specification. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-28net: ethernet: remove unnecessary platform_set_drvdata()Jingoo Han2-3/+0
The driver core clears the driver data to NULL after device_release or on probe failure, since commit 0998d0631001288a5974afc0b2a5f568bcdecb4d (device-core: Ensure drvdata = NULL when no driver is bound). Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Roland Stigge <stigge@antcom.de> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Tested-by: Roland Stigge <stigge@antcom.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-15net/macb: fix ISR clear-on-write behavior only for some SoCNicolas Ferre2-2/+23
Commit 749a2b6 (net/macb: clear tx/rx completion flags in ISR) introduces clear-on-write on ISR register. This behavior is not always implemented when using Cadence MACB/GEM and is breaking other platforms. We are using the Design Configuration Register 1 information and a capability property to actually activate this clear-on-write behavior on ISR. Reported-by: Hein Tibosch <hein_tibosch@yahoo.es> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Hein Tibosch <hein_tibosch@yahoo.es> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-12net/ethernet: MACB should depend on HAS_DMAGeert Uytterhoeven1-0/+1
If NO_DMA=y: drivers/built-in.o: In function `macb_free_consistent': drivers/net/ethernet/cadence/macb.c:878: undefined reference to `dma_free_coherent' drivers/net/ethernet/cadence/macb.c:883: undefined reference to `dma_free_coherent' drivers/net/ethernet/cadence/macb.c:888: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `macb_alloc_consistent': drivers/net/ethernet/cadence/macb.c:905: undefined reference to `dma_alloc_coherent' drivers/built-in.o: In function `macb_tx_interrupt': drivers/net/ethernet/cadence/macb.c:515: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `macb_tx_error_task': drivers/net/ethernet/cadence/macb.c:457: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `macb_start_xmit': drivers/net/ethernet/cadence/macb.c:838: undefined reference to `dma_map_single' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-12net/ethernet: ARM_AT91_ETHER should depend on HAS_DMAGeert Uytterhoeven1-1/+1
If NO_DMA=y: drivers/built-in.o: In function `at91ether_start': drivers/net/ethernet/cadence/at91_ether.c:49: undefined reference to `dma_alloc_coherent' drivers/net/ethernet/cadence/at91_ether.c:60: undefined reference to `dma_free_coherent' drivers/built-in.o: In function `at91ether_interrupt': drivers/net/ethernet/cadence/at91_ether.c:250: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `at91ether_start_xmit': drivers/net/ethernet/cadence/at91_ether.c:169: undefined reference to `dma_map_single' drivers/built-in.o: In function `at91ether_close': drivers/net/ethernet/cadence/at91_ether.c:145: undefined reference to `dma_free_coherent' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-15net/macb: fix error return code in macb_probe()Nicolas Ferre1-2/+2
Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Original-idea-by: <yongjun_wei@trendmicro.com.cn> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-13net/at91_ether: fix error return code in at91ether_probe()Wei Yongjun1-1/+2
Fix to return a negative error code from the error handling case instead of 0, as returned elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-03net/cadence/macb: Simplify OF dependenciesGuenter Roeck1-37/+6
With of_get_mac_address() and of_get_phy_mode() now defined as dummy functions if OF_NET is not configured, it is no longer necessary to provide OF dependent functions as front-end. Also, the two functions depend on OF_NET, not on OF, so the conditional code was not correct anyway. Drop the front-end functions and call of_get_mac_address() and of_get_phy_mode() directly instead. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-03net/cadence/at91_ether: Simplify OF dependenciesGuenter Roeck1-38/+6
With of_get_mac_address() and of_get_phy_mode() now defined as dummy functions if OF_NET is not configured, it is no longer necessary to provide OF dependent functions as front-end. Also, the two functions depend on OF_NET, not on OF, so the conditional code was not correct anyway. Drop the front-end functions and call of_get_mac_address() and of_get_phy_mode() directly instead. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-28net/macb: make clk_enable atomicSteffen Trumtrar1-10/+10
Use clk_prepare_enable/clk_disable_unprepare to be safe on SMP systems. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Fabio Estevam <festevam@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-28net/macb: force endian_swp_pkt_en to offSteffen Trumtrar2-0/+3
The core has a bit for swapping packet data endianism. Reset default from Cadence is off. Xilinx however, who uses this core on the Zynq SoCs, opted for on. Force it to off. This shouldn't change the behaviour for current users of the macb, but enables usage on Zynq devices. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-28net/macb: clear tx/rx completion flags in ISRSteffen Trumtrar1-0/+3
At least in the cadence IP core on the Xilinx Zynq SoC the TCOMP/RCOMP flags are not auto-cleaned. As these flags are evaluated, they need to be cleaned. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-15drivers:net: Remove dma_alloc_coherent OOM messagesJoe Perches1-11/+8
I believe these error messages are already logged on allocation failure by warn_alloc_failed and so get a dump_stack on OOM. Remove the unnecessary additional error logging. Around these deletions: o Alignment neatening. o Remove unnecessary casts of dma_alloc_coherent. o Hoist assigns from ifs. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-10drivers:net: Remove unnecessary OOM messages after netdev_alloc_skbJoe Perches1-1/+0
Emitting netdev_alloc_skb and netdev_alloc_skb_ip_align OOM messages is unnecessary as there is already a dump_stack after allocation failures. Other trivial changes around these removals: Convert a few comparisons of pointer to 0 to !pointer. Change flow to remove unnecessary label. Remove now unused variable. Hoist assignment from if. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-06net: macb: use module_platform_driver_probe()Jingoo Han1-12/+1
This patch uses module_platform_driver_probe() macro which makes the code smaller and simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-06net: at91_ether: use module_platform_driver_probe()Jingoo Han1-12/+1
This patch uses module_platform_driver_probe() macro which makes the code smaller and simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-22Merge branch 'for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 update from Martin Schwidefsky: "The most prominent change in this patch set is the software dirty bit patch for s390. It removes __HAVE_ARCH_PAGE_TEST_AND_CLEAR_DIRTY and the page_test_and_clear_dirty primitive which makes the common memory management code a bit less obscure. Heiko fixed most of the PCI related fallout, more often than not missing GENERIC_HARDIRQS dependencies. Notable is one of the 3270 patches which adds an export to tty_io to be able to resize a tty. The rest is the usual bunch of cleanups and bug fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (42 commits) s390/module: Add missing R_390_NONE relocation type drivers/gpio: add missing GENERIC_HARDIRQ dependency drivers/input: add couple of missing GENERIC_HARDIRQS dependencies s390/cleanup: rename SPP to LPP s390/mm: implement software dirty bits s390/mm: Fix crst upgrade of mmap with MAP_FIXED s390/linker skript: discard exit.data at runtime drivers/media: add missing GENERIC_HARDIRQS dependency s390/bpf,jit: add vlan tag support drivers/net,AT91RM9200: add missing GENERIC_HARDIRQS dependency iucv: fix kernel panic at reboot s390/Kconfig: sort list of arch selected config options phylib: remove !S390 dependeny from Kconfig uio: remove !S390 dependency from Kconfig dasd: fix sysfs cleanup in dasd_generic_remove s390/pci: fix hotplug module init s390/pci: cleanup clp page allocation s390/pci: cleanup clp inline assembly s390/perf: cpum_cf: fallback to software sampling events s390/mm: provide PAGE_SHARED define ...
2013-02-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net into netDavid S. Miller1-0/+5
Pull in 'net' to take in the bug fixes that didn't make it into 3.8-final. Also, deal with the semantic conflict of the change made to net/ipv6/xfrm6_policy.c A missing rt6->n neighbour release was added to 'net', but in 'net-next' we no longer cache the neighbour entries in the ipv6 routes so that change is not appropriate there. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-14drivers/net,AT91RM9200: add missing GENERIC_HARDIRQS dependencyHeiko Carstens1-0/+1
The AT91RM9200 driver call devm_request_irq() and therefore should depend on GENERIC_HARDIRQS to prevent link/compile errors on plaforms without GENERIC_HARDIRQS. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-02-13net/macb: fix race with RX interrupt while doing NAPINicolas Ferre1-0/+5
When interrupts are disabled, an RX condition can occur but it is not reported when enabling interrupts again. We need to check RSR and use napi_reschedule() if condition is met. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-15net: phy: remove flags argument from phy_{attach, connect, connect_direct}Florian Fainelli1-1/+1
The flags argument of the phy_{attach,connect,connect_direct} functions is then used to assign a struct phy_device dev_flags with its value. All callers but the tg3 driver pass the flag 0, which results in the underlying PHY drivers in drivers/net/phy/ not being able to actually use any of the flags they would set in dev_flags. This patch gets rid of the flags argument, and passes phydev->dev_flags to the internal PHY library call phy_attach_direct() such that drivers which actually modify a phy device dev_flags get the value preserved for use by the underlying phy driver. Acked-by: Kosta Zertsekel <konszert@marvell.com> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03net/cadence: remove __dev* attributesBill Pemberton2-6/+6
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-23net/macb: GEM DMA configuration register updateNicolas Ferre2-2/+19
Add information to the DMA Configuration Register to maximize system performance: - rx/tx packet buffer full memory size - allow possibility to use INCR16 if supported Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Joachim Eastwood <manabian@gmail.com Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-20net/ethernet: remove useless is_valid_ether_addr from drivers ndo_openJoachim Eastwood2-6/+0
If ndo_validate_addr is set to the generic eth_validate_addr function there is no point in calling is_valid_ether_addr from driver ndo_open if ndo_open is not used elsewhere in the driver. With this change is_valid_ether_addr will be called from the generic eth_validate_addr function. So there should be no change in the actual behavior. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-19net/macb: move to circ_buf macros and fix initial conditionNicolas Ferre1-10/+7
Move to circular buffers management macro and correct an error with circular buffer initial condition. Without this patch, the macb_tx_ring_avail() function was not reporting the proper ring availability at startup: macb macb: eth0: BUG! Tx Ring full when queue awake! macb macb: eth0: tx_head = 0, tx_tail = 0 And hanginig forever... I remove the macb_tx_ring_avail() function and use the proven macros from circ_buf.h. CIRC_CNT() is used in the "consumer" part of the driver: macb_tx_interrupt() to match advice from Documentation/circular-buffers.txt. Reported-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-15net/macb: clear unused address registerJoachim Eastwood2-0/+14
Only the first register set is used for matching but we support getting the initial hw addr from any of the registers. To prevent stale entries and false matches clear unused register sets. This most important for the at91_ether driver where u-boot always uses the 2nd register set. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-15net/macb: add support for phy irq via gpio pinJoachim Eastwood1-1/+11
Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-08net/at91_ether: fix comment and style issuesJoachim Eastwood1-60/+51
Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-08net/at91_ether: clean up print outsJoachim Eastwood1-10/+7
Convert all printk's to netdev_ counterparts and fix up some printed texts. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-08net/at91_ether: drop board_data private struct memberJoachim Eastwood2-8/+1
No longer used after gpio phy interrupt support was removed from at91_ether. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-08net/at91_ether: use stat function from macbJoachim Eastwood3-42/+11
Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-08net/at91_ether: use macb functions for get/set hwaddrJoachim Eastwood1-109/+3
Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-08net/macb: export macb_set_hwaddr and macb_get_hwaddrJoachim Eastwood2-3/+7
for usage in at91_ether driver. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-20 23:01:48 +0300