summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/broadcom
AgeCommit message (Collapse)AuthorFilesLines
2012-01-23tg3: fix ipv6 header length computationEric Dumazet1-7/+2
tg3_start_xmit() makes the wrong assumption for TSOV6 that skb->head doesnt include any payload data. if (skb_is_gso_v6(skb)) hdr_len = skb_headlen(skb) - ETH_HLEN; This is not true anymore after commit f07d960df3 (tcp: avoid frag allocation for small frames) We should instead use : skb_transport_offset(skb) + tcp_hdrlen(skb) Its also true for IPv4 Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Matt Carlson <mcarlson@broadcom.com> CC: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-23bnx2x: fix compilation error with SOE in fw_dumpYuval Mintz1-1/+1
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-23bnx2x: handle CHIP_REVISION during init_oneAriel Elior1-4/+5
The macro `CHIP_IS_E1x' requires `bp' to be initialized. As `bp' is not yet initialized during this phase of `bnx2x_init_dev', it accessed uninitialized fields in the struct. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-23bnx2x: allow user to change ring size in ISCSI SD modeDmitry Kravkov1-1/+1
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-23bnx2x: fix Big-Endianess in ethtool -tDmitry Kravkov1-3/+2
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-23bnx2x: fixed ethtool statistics for MF modesYuval Mintz1-65/+41
Previosuly, in MF modes `ethtool -S' lacked some of the statistics which appeared in non-MF modes. This has been fixed. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-23bnx2x: credit-leakage fixup on vlan_mac_del_allYuval Mintz2-1/+54
Upon insertion of elements into the execution queue, it is validated that there are enough credits to support additional vlan-macs, and the credits are consumed. However, when removing a pending command in `bnx2x_vland_mac_del_all' the consumed credits are not released, which might cause leakage and eventually the inability to add new vlan-macs in certain scenarios. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-18tg3: Fix single-vector MSI-X codeMatt Carlson1-13/+14
Kdump kernels leave MSI-X interrupts (as setup by the crashed kernel) enabled. However, kdump only enables one CPU in the new environment, thus causing tg3 to abort MSI-X setup. When the driver attempts to enable INTA or MSI interrupt modes on a kdump kernel, interrupt delivery fails. This patch attempts to workaround the problem by forcing the driver to enable a single MSI-X interrupt. In such a configuration, the device's multivector interrupt mode must be disabled. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17bnx2x: Disable AN KR work-around for BCM57810Yaniv Rosner1-1/+9
Disable the work-around for the autoneg KR of the BCM57810 in case the Warpcore version is 0xD108 and above, which fixes this problem. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17bnx2x: Remove AutoGrEEEn for BCM84833Yaniv Rosner1-6/+2
Disable the autoGrEEEn feature for BCM84833. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17bnx2x: Remove 100Mb force speed for BCM84833Yaniv Rosner2-6/+21
Remove unsupported speed of 100Mb force for BCM84833 due to hardware limitation. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17bnx2x: Fix PFC setting on BCM57840Yaniv Rosner2-10/+13
This patch handles the second port of a path in a 4-port device of BCM57840. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17bnx2x: Fix Super-Isolate mode for BCM84833Yaniv Rosner1-113/+137
The Super-Isolate mode comes to isolate the BCM84833 PHY from the outside world. Not doing it correctly, made link partner see the link before the driver was loaded. This patch also involves SPIROM version fixes since it is used to determine whether the common init of the PHY was already executed, and the common init of this PHY is partially responsible for setting the Super-Isolate mode. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-11bcm63xx_enet: use an unique MDIO bus name.Florian Fainelli1-1/+1
Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-11sb1250: use an unique MDIO bus name.Florian Fainelli1-1/+2
Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-10bcm63xx: make ethtool_ops conststephen hemminger1-1/+1
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05cnic: Improve error recovery on bnx2x devicesMichael Chan3-8/+74
When a bnx2x device encounters parity errors, it will not respond to all SPQ messages. As a result, the shutdown sequence before reset can take a long time as the ulp drivers (bnx2i/bnx2fc) have to wait for timeout of all such messages. To improve this scenario, when bnx2x returns error on the SPQ, we'll send an immediate response to the ulp drivers to avoid such lengthy timeouts. Adjust the return code of relevant functions to return error only if the message cannot be sent on the SPQ so that we'll generate an error completion to the ulp drivers. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05cnic: Re-init dev->stats_addr after chip resetMichael Chan1-0/+1
because bnx2x frees the old and allocates new memory during chip reset. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-20net: fix assignment of 0/1 to bool variables.Rusty Russell1-4/+4
DaveM said: Please, this kind of stuff rots forever and not using bool properly drives me crazy. Joe Perches <joe@perches.com> gave me the spatch script: @@ bool b; @@ -b = 0 +b = false @@ bool b; @@ -b = 1 +b = true I merely installed coccinelle, read the documentation and took credit. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-20tg3: Make the RSS indir tbl admin configurableMatt Carlson1-7/+101
This patch adds the ethtool callbacks necessary to change the rss indirection table from userspace. Should the number of interrupts change (e.g. across a close / open call, or through a reset) and any one of the indirection table values fall out-of-range, the driver will reset the indirection table to a default layout. [Integrated many suggestions made by Ben Hutchings.] Changes since v3 * Removed TG3_FLAG_SUPPORT_MSIX checks at the start of tg3_get_rxfh_indir() and tg3_set_rxfh_indir(). Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-20bnx2: Update driver to use new mips firmware.Michael Chan1-4/+4
bnx2-mips-06-6.2.3 and bnx2-mips-09-6.2.1.b New firmware fixes iSCSI problems with some LeftHand targets that don't set TTT=0xffffffff for Data-In according to spec. Firmware generates exception warnings for this condition and becomes very slow. This is fixed by suppressing these warnings when using default error mask. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-16ethtool: Define and apply a default policy for RX flow hash indirectionBen Hutchings1-1/+2
All drivers that support modification of the RX flow hash indirection table initialise it in the same way: RX rings are assigned to table entries in rotation. Make that default policy explicit by having them call a ethtool_rxfh_indir_default() function. In the ethtool core, add support for a zero size value for ETHTOOL_SRXFHINDIR, which resets the table to this default. Partly-suggested-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-16ethtool: Centralise validation of ETHTOOL_{G, S}RXFHINDIR parametersBen Hutchings1-25/+14
Add a new ethtool operation (get_rxfh_indir_size) to get the indirectional table size. Use this to validate the user buffer size before calling get_rxfh_indir or set_rxfh_indir. Use get_rxnfc to get the number of RX rings, and validate the contents of the new indirection table before calling set_rxfh_indir. Remove this validation from drivers. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-15tg3: Break out RSS indir table init and assignmentMatt Carlson2-23/+37
This patch creates a new device member to hold the RSS indirection table and separates out the code that initializes the table from the code that programs the table into device registers. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-15tg3: Use mii_advertise_flowctrlMatt Carlson1-19/+3
This patch replaces tg3's internal tg3_advert_flowctrl_1000T function with mii_advertise_flowctrl provided by the kernel headers. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-15tg3: Add 57766 ASIC rev supportMatt Carlson2-27/+58
This patch adds support for the 57766 ASIC revision. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-15tg3: Make the TX BD DMA limit configurableMatt Carlson2-8/+9
The 57766 ASIC rev will impose a new TX BD DMA limit on the driver. This patch prepares for 57766 support by making the tx BD DMA limit tunable. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-15tg3: Enable EEE support for capable 10/100 devsMatt Carlson1-10/+9
There are some devices in the 57765 ASIC rev that are EEE capable. Unfortunately the EEE setup code only gets executed if the device is gigabit capable. This patch fixes the problem. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-14bnx2x: handle vpd data longer than 128 bytesBarak Witkowski1-7/+28
Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-13bnx2x: properly update skb when mtu > 1500Dmitry Kravkov1-11/+11
Since commit e52fcb2462ac484e6dd6e68869536609f0216938 newly allocated skb for small packets are not updated properly and dropped by stack. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-09bnx2x: properly initialize L5 featuresDmitry Kravkov2-6/+8
The code is missing initialization of NO_FCOE_FLAG and NO_ISCSI*FLAGS when CONFIG_CNIC is not selected. This causes panic during driver load since commit 1d187b34daaecbb87aa523ba46b92930a388cb21 where NO_FCOE tested unconditionally (outside #ifdef BCM_CNIC structure) and accessed fp[FCOE_IDX] which is not allocated. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-09tg3: Update version to 3.122Matt Carlson1-2/+2
This patch updates the tg3 version to 3.122. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-09tg3: Return flowctrl config through ethtoolMatt Carlson1-2/+2
This patch changes the driver to return the flow control configuration rather than the flow control status through the ETHTOOL_GPAUSEPARAM ioctl. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-09tg3: Track LP advertisingMatt Carlson2-3/+38
This patch adds code to track the autonegotiation advertisements of the link partner and report them through ethtool. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-09tg3: Integrate flowctrl check into AN adv checkMatt Carlson1-56/+25
This patch integrates tg3_adv_1000T_flowctrl_ok() into tg3_copper_is_advertising_all() and renames the function tg3_phy_copper_an_config_ok(). Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-09tg3: Save stats across chip resetsMatt Carlson1-9/+17
Tg3 has a place to store stats, but doesn't really use it. This patch modifies the driver so that stats are saved across chip resets and gets cleared across close / open calls. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-09tg3: Remove ethtool stats member from dev structMatt Carlson2-8/+7
This patch removes the ethtool stats member from the tg3 device structure. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-07bnx2x: fix typo in fcoe stats collectionBarak Witkowski1-1/+1
Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-07bnx2x: Fix compile errors if CONFIG_CNIC is not setMichael Chan1-2/+2
Don't provide FCoE and iSCSI statistics to management firmware if CONFIG_CNIC is not set. Some needed structure fields are not defined without CONFIG_CNIC. Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06bnx2x: fix crash while ethtool -tDmitry Kravkov1-0/+3
commit 2df1a70aaf70e8dff11b89b938a5f317556ee640 "bnx2x: Support for byte queue limits" has introduced an asymmetry in usage of netdev_tx_completed_queue and netdev_tx_sent_queue. Missing call to netdev_tx_sent_queue causes the crash during ethtool -t. The patch adds the missing call. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06bnx2x, cnic: support DRV_INFO upon FW requestBarak Witkowski6-8/+459
Add support to send driver capabilities, settings and statistics to management firmware. [ Redone using many local variables, removed many unnecessary inlines, and put #defines at the left margin suggested by Joe Perches ] Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06bnx2x: support classification config queryAriel Elior2-0/+46
To support copying MAC addresses to firmware query structure. [ Fixed up style and formatting errors noted by DaveM and Joe Perches ] Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06bnx2x: add fcoe statisticsBarak Witkowski4-23/+120
Add FCoE statistics support for FCoE capable devices. Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06bnx2x: add PFC statisticsBarak Witkowski6-3/+63
Add Priority flow control counters for ethtool -S. Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-04bnx2x: Use kcalloc instead of kzalloc to allocate arrayThomas Meyer2-3/+3
The advantage of kcalloc is, that will prevent integer overflows which could result from the multiplication of number of elements and size and it is also a bit nicer to read. The semantic patch that makes this change is available in https://lkml.org/lkml/2011/11/25/107 Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-01bnx2: Support for byte queue limitsEric Dumazet1-0/+6
Changes to bnx2 to use byte queue limits. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-30bnx2x: handle iSCSI SD modeDmitry Kravkov4-9/+86
in iSCSI SD mode to bnx2x device assigned single mac address which is supposted to be iscsi mac. If this mode is recognized bnx2x will disable LRO, decrease number of queues to 1 and rx ring size to the minumum allowed by FW, this in order minimize memory use. It will tranfer mac for iscsi usage and zero primary mac of the netdev. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29bnx2x: Support for byte queue limitsTom Herbert1-4/+22
Changes to bnx2x to use byte queue limits. Signed-off-by: Tom Herbert <therbert@google.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29tg3: Support for byte queue limitsTom Herbert1-0/+8
Changes to tg3 to use byte queue limits. Signed-off-by: Tom Herbert <therbert@google.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29net/ethernet: convert drivers/net/ethernet/* to use module_platform_driver()Axel Lin1-12/+1
This patch converts the drivers in drivers/net/ethernet/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Cc: "David S. Miller" <davem@davemloft.net> Cc: Pantelis Antoniou <pantelis.antoniou@gmail.com> Cc: Vitaly Bordug <vbordug@ru.mvista.com> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jiri Pirko <jpirko@redhat.com> Cc: Daniel Hellstrom <daniel@gaisler.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Tobias Klauser <tklauser@distanz.ch> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Richard Cochran <richard.cochran@omicron.at> Cc: Jonas Bonn <jonas@southpole.se> Cc: Sebastian Poehn <sebastian.poehn@belden.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-11 01:09:08 +0300