summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/broadcom
AgeCommit message (Collapse)AuthorFilesLines
2013-03-12bnx2x: Avoid using zero MACYuval Mintz1-7/+5
Prevent bnx2x devices which are used mainly for storage from using zero MAC addresses as their primary MAC address. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-12bnx2x: Control SFP+ tap values via nvm configYaniv Rosner2-34/+60
Configure SFP+ tap values to optimize link signal according to NVRAM setup. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-12bnx2x: Add EEE support for BCM84834Yaniv Rosner1-1/+2
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-12bnx2x: Add RJ45 SFP module detectionYaniv Rosner1-8/+13
Add RJ45 SFP module detection. In case the user set 10G link speed, and the module doesn't support it, then force the speed to 1G and notify the user. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-12bnx2x: Get gso_segs from FWYuval Mintz1-4/+5
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-12bnx2x: Control number of vfs dynamicallyAriel Elior4-44/+91
1. Support sysfs interface for getting the maximal number of virtual functions of a given physical function. 2. Support sysfs interface for getting and setting the current number of virtual functions. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-12bnx2x: Add iproute2 support for vfsAriel Elior8-46/+277
This patch adds support for iproute2 callbacks allowing querying a physical function as to its child virtual functions, and setting the macs and vlans of said virtual functions. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-12bnx2x: Prevent "Unknown MF" print in SF modeAriel Elior1-0/+3
When using a chip operating in Single Function mode, when the chip is probed the bnx2x would print a message warning of an unknown Multi Function mode. This patch prevents said message. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-12bnx2x: Take chip version from MFWYuval Mintz2-6/+8
In latest boards, the CHIP_METAL register contains an incorrect revision value, so the correct one needs to be obtained in a different manner. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-12bnx2x: Set ethtool ops for vfsAriel Elior3-4/+29
Virtual functions don't have access to HW registers, therefore most ethtool ops are forbidden to them. Instead of checking in each op whether the device being driven is a virtual function or a physical function, this patch creates a separate ethtool ops struct for virtual functions and uses it to initialize the ethtool ops of the driver in case it is driving a virtual function device. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-12bnx2x: fix vlan-mac memory leakYuval Mintz1-0/+1
Release (previously leaking) memory when elements are removed from pending execution lists in the bnx2x driver. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-11/+24
Conflicts: drivers/net/ethernet/intel/e1000e/netdev.c Minor conflict in e1000e, a line that got fixed in 'net' has been removed in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-11bcm63xx_enet: properly prepare/unprepare clocks before/after usageJonas Gorski1-6/+6
Use clk_prepare_enable/disable_unprepare calls in preparation for switching to the generic clock framework. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Acked-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-11bcm63xx_enet: use managed memory allocationsJonas Gorski1-5/+3
Signed-off-by: Jonas Gorski <jogo@openwrt.org> Acked-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-11bcm63xx_enet: use managed io memory allocationsJonas Gorski1-36/+7
Signed-off-by: Jonas Gorski <jogo@openwrt.org> Acked-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-10drivers:net: Remove unnecessary OOM messages after netdev_alloc_skbJoe Perches2-7/+2
Emitting netdev_alloc_skb and netdev_alloc_skb_ip_align OOM messages is unnecessary as there is already a dump_stack after allocation failures. Other trivial changes around these removals: Convert a few comparisons of pointer to 0 to !pointer. Change flow to remove unnecessary label. Remove now unused variable. Hoist assignment from if. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-08tg3: Update link_up flag for phylib devicesNithin Sujir1-9/+5
Commit f4a46d1f46a8fece34edd2023e054072b02e110d introduced a bug where the ifconfig stats would remain 0 for phylib devices. This is due to tp->link_up flag never becoming true causing tg3_periodic_fetch_stats() to return. The link_up flag was being updated in tg3_test_and_report_link_chg() after setting up the phy. This function however, is not called for phylib devices since the driver does not do the phy setup. This patch moves the link_up flag update into the common tg3_link_report() function that gets called for phylib devices as well for non phylib devices when the link state changes. To avoid updating link_up twice, we replace tg3_carrier_...() calls that are followed by tg3_link_report(), with netif_carrier_...(). We can then remove the unused tg3_carrier_on() function. CC: <stable@vger.kernel.org> Reported-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-08bnx2x: Fix SFP+ misconfiguration in iSCSI boot scenarioYaniv Rosner2-1/+6
Fix a problem in which iSCSI-boot installation fails when switching SFP+ boot port and moving the SFP+ module prior to boot. The SFP+ insertion triggers an interrupt which configures the SFP+ module wrongly before interface is loaded. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-08bnx2x: Fix intermittent long KR2 link up timeYaniv Rosner2-1/+13
When a KR2 device is connected to a KR link-partner, sometimes it requires disabling KR2 for the link to come up. To get a KR2 link up later, in case no base pages are seen, the KR2 is restored. The problem was that some link partners cleared their advertised BP/NP after around two seconds, causing the driver to disable/enable KR2 link all the time. The fix was to wait at least 5 seconds before checking KR2 recovery. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-08bgmac: register MII busRafał Miłecki2-1/+80
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-08tg3: Download 57766 EEE service patch firmwareNithin Sujir2-16/+128
This patch downloads the EEE service patch firmware and enables the necessary EEE flags. Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-08tg3: Enhance firmware download code to support fragmented firmwareNithin Sujir1-6/+42
This lays the ground work to download the 57766 fragmented firmware. We loop until we've written data equal to tp->fw->size minus headers. Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-08tg3: Cleanup firmware parsing codeNithin Sujir2-36/+34
The current firmware header parsing is complicated due to interpreting it as a u32 array and accessing header members via array offsets. Add tg3_firmware_hdr structure to access the firmware fields instead of hardcoding offsets. The same header format will be used for individual firmware fragments in the 57766. The fw_hdr and tg3 structures have all the information required for loading the fw. Remove the redundant fw_info structure and pass fw_hdr instead. Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-08tg3: Refactor the 2nd type of cpu pauseNithin Sujir1-26/+27
For completeness and consistency, add common function tg3_pause_cpu_and_set_pc(). This is only for existing fw and not used for the 57766. Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-08tg3: Refactor cpu pause/resume codeNithin Sujir1-25/+58
The 57766 rxcpu needs to be paused/resumed when we download the firmware just like we do for existing firmware. Refactor the pause/resume code to be reusable. This patch also renames the "offset" argument of tg3_halt_cpu to "cpu_base" since that's what it really is. Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-08tg3: Add new FW_TSO flagMatt Carlson2-8/+8
tg3 used the fw_needed member loosely as a synonym for firmware TSO. Now that the 57766 needs firmware download support, fw_needed can no longer be used like this. This patch creates a new FW_TSO flag and changes the code to use it. Also rearrange all the TSO flags together in the enum. Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-06bnx2x: use the default NAPI weightEric Dumazet2-3/+2
BQL (Byte Queue Limits) proper operation needs TX completion being serviced in a timely fashion. bnx2x uses a non standard NAPI poll weight, and thats not fair to other napi poll handlers, and even not reasonable. Use the default value instead. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds5-3/+76
Pull networking fixes from David Miller: "A moderately sized pile of fixes, some specifically for merge window introduced regressions although others are for longer standing items and have been queued up for -stable. I'm kind of tired of all the RDS protocol bugs over the years, to be honest, it's way out of proportion to the number of people who actually use it. 1) Fix missing range initialization in netfilter IPSET, from Jozsef Kadlecsik. 2) ieee80211_local->tim_lock needs to use BH disabling, from Johannes Berg. 3) Fix DMA syncing in SFC driver, from Ben Hutchings. 4) Fix regression in BOND device MAC address setting, from Jiri Pirko. 5) Missing usb_free_urb in ISDN Hisax driver, from Marina Makienko. 6) Fix UDP checksumming in bnx2x driver for 57710 and 57711 chips, fix from Dmitry Kravkov. 7) Missing cfgspace_lock initialization in BCMA driver. 8) Validate parameter size for SCTP assoc stats getsockopt(), from Guenter Roeck. 9) Fix SCTP association hangs, from Lee A Roberts. 10) Fix jumbo frame handling in r8169, from Francois Romieu. 11) Fix phy_device memory leak, from Petr Malat. 12) Omit trailing FCS from frames received in BGMAC driver, from Hauke Mehrtens. 13) Missing socket refcount release in L2TP, from Guillaume Nault. 14) sctp_endpoint_init should respect passed in gfp_t, rather than use GFP_KERNEL unconditionally. From Dan Carpenter. 15) Add AISX AX88179 USB driver, from Freddy Xin. 16) Remove MAINTAINERS entries for drivers deleted during the merge window, from Cesar Eduardo Barros. 17) RDS protocol can try to allocate huge amounts of memory, check that the user's request length makes sense, from Cong Wang. 18) SCTP should use the provided KMALLOC_MAX_SIZE instead of it's own, bogus, definition. From Cong Wang. 19) Fix deadlocks in FEC driver by moving TX reclaim into NAPI poll, from Frank Li. Also, fix a build error introduced in the merge window. 20) Fix bogus purging of default routes in ipv6, from Lorenzo Colitti. 21) Don't double count RTT measurements when we leave the TCP receive fast path, from Neal Cardwell." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (61 commits) tcp: fix double-counted receiver RTT when leaving receiver fast path CAIF: fix sparse warning for caif_usb rds: simplify a warning message net: fec: fix build error in no MXC platform net: ipv6: Don't purge default router if accept_ra=2 net: fec: put tx to napi poll function to fix dead lock sctp: use KMALLOC_MAX_SIZE instead of its own MAX_KMALLOC_SIZE rds: limit the size allocated by rds_message_alloc() MAINTAINERS: remove eexpress MAINTAINERS: remove drivers/net/wan/cycx* MAINTAINERS: remove 3c505 caif_dev: fix sparse warnings for caif_flow_cb ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver sctp: use the passed in gfp flags instead GFP_KERNEL ipv[4|6]: correct dropwatch false positive in local_deliver_finish l2tp: Restore socket refcount when sendmsg succeeds net/phy: micrel: Disable asymmetric pause for KSZ9021 bgmac: omit the fcs phy: Fix phy_device_free memory leak bnx2x: Fix KR2 work-around condition ...
2013-03-02Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2-5/+5
Pull MIPS updates from Ralf Baechle: o Add basic support for the Mediatek/Ralink Wireless SoC family. o The Qualcomm Atheros platform is extended by support for the new QCA955X SoC series as well as a bunch of patches that get the code ready for OF support. o Lantiq and BCM47XX platform have a few improvements and bug fixes. o MIPS has sent a few patches that get the kernel ready for the upcoming microMIPS support. o The rest of the series is made up of small bug fixes and cleanups that relate to various parts of the MIPS code. The biggy in there is a whitespace cleanup. After I was sent another set of whitespace cleanup patches I decided it was the time to clean the whitespace "issues" for once and and that touches many files below arch/mips/. Fix up silly conflicts, mostly due to whitespace cleanups. * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (105 commits) MIPS: Quit exporting kernel internel break codes to uapi/asm/break.h MIPS: remove broken conditional inside vpe loader code MIPS: SMTC: fix implicit declaration of set_vi_handler MIPS: early_printk: drop __init annotations MIPS: Probe for and report hardware virtualization support. MIPS: ath79: add support for the Qualcomm Atheros AP136-010 board MIPS: ath79: add USB controller registration code for the QCA955X SoCs MIPS: ath79: add PCI controller registration code for the QCA955X SoCs MIPS: ath79: add WMAC registration code for the QCA955X SoCs MIPS: ath79: register UART for the QCA955X SoCs MIPS: ath79: add QCA955X specific glue to ath79_device_reset_{set, clear} MIPS: ath79: add GPIO setup code for the QCA955X SoCs MIPS: ath79: add IRQ handling code for the QCA955X SoCs MIPS: ath79: add clock setup code for the QCA955X SoCs MIPS: ath79: add SoC detection code for the QCA955X SoCs MIPS: ath79: add early printk support for the QCA955X SoCs MIPS: ath79: fix WMAC IRQ resource assignment mips: reserve elfcorehdr mips: Make sure kernel memory is in iomem MIPS: ath79: use dynamically allocated USB platform devices ...
2013-03-01bgmac: omit the fcsHauke Mehrtens1-0/+4
Do not include the frame check sequence when adding the skb to netif_receive_skb(). This causes problems when this interface was bridged to a wifi ap and a big package should be forwarded from this Ethernet driver through a bride to the wifi client. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-01bnx2x: Fix KR2 work-around conditionYaniv Rosner1-1/+1
Fix condition typo for running KR2 work-around though it doesn't have real effect since the typo bits matched by chance. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-01bnx2x: Fix KR2 linkYaniv Rosner2-0/+8
Fix KR2 link down problem after reboot when link speed is reconfigured via ethtool. Since 1G/10G support link speed were missing by default, 1G/10G link speed were not advertised. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-01bnx2x: Fix port identification for the 84834Yaniv Rosner2-1/+62
Fix the "ethtool -p" for boards with BCM84834, by using LED4 of the PHY to toggle the link LED while keeping interrupt disabled to avoid NIG attentions, and at the end restore NIG to previous state. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-27bnx2x: fix UDP checksum for 57710/57711.Dmitry Kravkov1-1/+1
Since commit 86564c3f "bnx2x: Remove many sparse warnings" UDP csum offload is broken for 57710/57711. Fix return value. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> CC: Ariel Elior <ariele@broadcom.com> CC: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds3-67/+13
Pull networking fixes from David Miller: 1) ping_err() ICMP error handler looks at wrong ICMP header, from Li Wei. 2) TCP socket hash function on ipv6 is too weak, from Eric Dumazet. 3) netif_set_xps_queue() forgets to drop mutex on errors, fix from Alexander Duyck. 4) sum_frag_mem_limit() can deadlock due to lack of BH disabling, fix from Eric Dumazet. 5) TCP SYN data is miscalculated in tcp_send_syn_data(), because the amount of TCP option space was not taken into account properly in this code path. Fix from yuchung Cheng. 6) MLX4 driver allocates device queues with the wrong size, from Kleber Sacilotto. 7) sock_diag can access past the end of the sock_diag_handlers[] array, from Mathias Krause. 8) vlan_set_encap_proto() makes incorrect assumptions about where skb->data points, rework the logic so that it works regardless of where skb->data happens to be. From Jesse Gross. 9) Fix gianfar build failure with NET_POLL enabled, from Paul Gortmaker. 10) Fix Ipv4 ID setting and checksum calculations in GRE driver, from Pravin B Shelar. 11) bgmac driver does: int i; for (i = 0; ...; ...) { ... for (i = 0; ...; ...) { effectively corrupting the outer loop index, use a seperate variable for the inner loops. From Rafał Miłecki. 12) Fix suspend bugs in smsc95xx driver, from Ming Lei. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (35 commits) usbnet: smsc95xx: rename FEATURE_AUTOSUSPEND usbnet: smsc95xx: fix broken runtime suspend usbnet: smsc95xx: fix suspend failure bgmac: fix indexing of 2nd level loops b43: Fix lockdep splat on module unload Revert "ip_gre: propogate target device GSO capability to the tunnel device" IP_GRE: Fix GRE_CSUM case. VXLAN: Use tunnel_ip_select_ident() for tunnel IP-Identification. IP_GRE: Fix IP-Identification. net/pasemi: Fix missing coding style vmxnet3: fix ethtool ring buffer size setting vmxnet3: make local function static bnx2x: remove dead code and make local funcs static gianfar: fix compile fail for NET_POLL=y due to struct packing vlan: adjust vlan_set_encap_proto() for its callers sock_diag: Simplify sock_diag_handlers[] handling in __sock_diag_rcv_msg sock_diag: Fix out-of-bounds access to sock_diag_handlers[] vxlan: remove depends on CONFIG_EXPERIMENTAL mlx4_en: fix allocation of CPU affinity reverse-map mlx4_en: fix allocation of device tx_cq ...
2013-02-26bgmac: fix indexing of 2nd level loopsRafał Miłecki1-7/+11
We were using the same variable for iterating two nested loops. Reported-by: Tijs Van Buggenhout <tvb@able.be> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-25bnx2x: remove dead code and make local funcs staticstephen hemminger2-60/+2
Sparse warned about several functions that were unnecessarily global. After making them static, discovered that several functions were actually never used. Compile tested only. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Eilon Greenstein <eilong@broadcomo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-22Merge branch 'master' of ↵Ralf Baechle38-2940/+13430
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into mips-for-linux-next Conflicts: include/linux/ssb/ssb_driver_gige.h Also resolves a logical merge conflict in drivers/net/ethernet/broadcom/- bgmac.c due to change of an API.
2013-02-22Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "Assorted tiny fixes queued in trivial tree" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (22 commits) DocBook: update EXPORT_SYMBOL entry to point at export.h Documentation: update top level 00-INDEX file with new additions ARM: at91/ide: remove unsused at91-ide Kconfig entry percpu_counter.h: comment code for better readability x86, efi: fix comment typo in head_32.S IB: cxgb3: delay freeing mem untill entirely done with it net: mvneta: remove unneeded version.h include time: x86: report_lost_ticks doesn't exist any more pcmcia: avoid static analysis complaint about use-after-free fs/jfs: Fix typo in comment : 'how may' -> 'how many' of: add missing documentation for of_platform_populate() btrfs: remove unnecessary cur_trans set before goto loop in join_transaction sound: soc: Fix typo in sound/codecs treewide: Fix typo in various drivers btrfs: fix comment typos Update ibmvscsi module name in Kconfig. powerpc: fix typo (utilties -> utilities) of: fix spelling mistake in comment h8300: Fix home page URL in h8300/README xtensa: Fix home page URL in Kconfig ...
2013-02-19b44: use netdev_alloc_skb_ip_align()Hauke Mehrtens1-2/+1
Without this patch b44 always allocates the 2 bytes needed for aligned access on every platform, now it uses netdev_alloc_skb_ip_align(). Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18tg3: Use different macros for pci_chip_rev_id accessesJoe Perches2-401/+408
Upper case macros for various chip attributes are slightly difficult to read and are a bit out of characterto the other tg3_<foo> attribute functions. Convert: GET_ASIC_REV(tp->pci_chip_rev_id) -> tg3_asic_rev(tp) GET_CHIP_REV(tp->pci_chip_rev_id) -> tg3_chip_rev(tp) Remove: GET_METAL_REV(tp->pci_chip_rev_id) -> tg3_metal_rev(tp) (unused) Add: tg3_chip_rev_id(tp) for tp->pci_chip_rev_id so access styles are similar to tg3_asic_rev and tg3_chip_rev. These macros are not converted to static inline functions because gcc (tested with 4.7.2) is currently unable to optimize the object code it produces the same way and code is otherwise larger. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18tg3: Remove define and single use of GET_CHIP_REV_IDJoe Perches2-9/+5
It's the same value as tp->pci_chip_rev_id so use that instead. This makes all CHIPREV_ID_<foo> tests the same. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-18bgmac: fix unaligned accesses to network headersHauke Mehrtens1-1/+1
Without this patch I get many unaligned access warnings per packet, this patches fixes them all. This should improve performance on some systems like mips. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-15tg3: Update version to 3.130Michael Chan1-2/+2
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-15tg3: Set initial carrier state to off.Michael Chan1-0/+2
Before the device is opened, the carrier state should be off. It will not race with the link interrupt if we set it before calling register_netdev(). Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-15tg3: Fix 5762 NVRAM sizingMichael Chan1-2/+4
Don't set the default size to 128K if it is 5762. Instead, rely on the size we obtain from NVRAM location 0xf0. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-15tg3: Expand EEE support for all 5717 B0Michael Chan1-1/+1
This chip supports Energy Efficient Ethernet. The existing code only supports a smaller set of devices with 5718 PCI ID. Expand support for all devices with the same 5717 B0 chip ID. Signed-off-by: Michael Chan <mchan@broadocm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-15tg3: Add 57766 device support.Matt Carlson2-1/+19
The patch also adds a couple of fixes - For the 57766 and non Ax versions of 57765, bootcode needs to setup the PCIE Fast Training Sequence (FTS) value to prevent transmit hangs. Unfortunately, it does not have enough room in the selfboot case (i.e. devices with no NVRAM). The driver needs to implement this. - For performance reasons, the 2k DMA engine mode on the 57766 should be enabled and dma size limited to 2k for standard sized packets. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-15MIPS: BCM47XX: add bcm47xx prefix in front of nvram function namesHauke Mehrtens1-2/+2
The nvram functions are exported and used by some normal drivers. To prevent name clashes with ofter parts of the kernel code add a bcm47xx_ prefix in front of the function names and the header file name. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Patchwork: http://patchwork.linux-mips.org/patch/4744/ Signed-off-by: John Crispin <blogic@openwrt.org>
2013-02-14bgmac: add read of interrupt mask after disabling interruptsNathan Hintz1-0/+1
The specs prescribe an immediate read of the interrupt mask after disabling interrupts. This patch updates the driver to match the specs. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-24 09:04:06 +0300