summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/broadcom
AgeCommit message (Collapse)AuthorFilesLines
2021-07-19net: bcmgenet: check return value after calling platform_get_resource()Yang Yingliang1-0/+4
[ Upstream commit 74325bf0104573c6dfce42837139aeef3f34be76 ] It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14net: bcmgenet: Fix attaching to PYH failed on RPi 4BJian-Hong Pan1-0/+1
[ Upstream commit b2ac9800cfe0f8da16abc4e74e003440361c112e ] The Broadcom UniMAC MDIO bus from mdio-bcm-unimac module comes too late. So, GENET cannot find the ethernet PHY on UniMAC MDIO bus. This leads GENET fail to attach the PHY as following log: bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 ... could not attach to PHY bcmgenet fd580000.ethernet eth0: failed to connect to PHY uart-pl011 fe201000.serial: no DMA platform data libphy: bcmgenet MII bus: probed ... unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus This patch adds the soft dependency to load mdio-bcm-unimac module before genet module to avoid the issue. Fixes: 9a4e79697009 ("net: bcmgenet: utilize generic Broadcom UniMAC MDIO controller driver") Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=213485 Signed-off-by: Jian-Hong Pan <jhp@endlessos.org> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14net: broadcom: bcm4908_enet: reset DMA rings sw indexes properlyRafał Miłecki1-3/+3
[ Upstream commit ddeacc4f6494e07cbb6f033627926623f3e7a9d0 ] Resetting software indexes in bcm4908_dma_alloc_buf_descs() is not enough as it's called during device probe only. Driver resets DMA on every .ndo_open callback and it's required to reset indexes then. This fixes inconsistent rings state and stalled traffic after interface down & up sequence. Fixes: 4feffeadbcb2 ("net: broadcom: bcm4908enet: add BCM4908 controller driver") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-23bnxt_en: Call bnxt_ethtool_free() in bnxt_init_one() error pathSomnath Kotur1-0/+1
[ Upstream commit 03400aaa69f916a376e11526cf591901a96a3a5c ] bnxt_ethtool_init() may have allocated some memory and we need to call bnxt_ethtool_free() to properly unwind if bnxt_init_one() fails. Fixes: 7c3809181468 ("bnxt_en: Refactor bnxt_init_one() and turn on TPA support on 57500 chips.") Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-23bnxt_en: Fix TQM fastpath ring backing store computationRukhsana Ansari1-1/+1
[ Upstream commit c12e1643d2738bcd4e26252ce531878841dd3f38 ] TQM fastpath ring needs to be sized to store both the requester and responder side of RoCE QPs in TQM for supporting bi-directional tests. Fix bnxt_alloc_ctx_mem() to multiply the RoCE QPs by a factor of 2 when computing the number of entries for TQM fastpath ring. This fixes an RX pipeline stall issue when running bi-directional max RoCE QP tests. Fixes: c7dd7ab4b204 ("bnxt_en: Improve TQM ring context memory sizing formulas.") Signed-off-by: Rukhsana Ansari <rukhsana.ansari@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-23bnxt_en: Rediscover PHY capabilities after firmware resetMichael Chan1-0/+5
[ Upstream commit 0afd6a4e8028cc487c240b6cfe04094e45a306e4 ] There is a missing bnxt_probe_phy() call in bnxt_fw_init_one() to rediscover the PHY capabilities after a firmware reset. This can cause some PHY related functionalities to fail after a firmware reset. For example, in multi-host, the ability for any host to configure the PHY settings may be lost after a firmware reset. Fixes: ec5d31e3c15d ("bnxt_en: Handle firmware reset status during IF_UP.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-16bnx2x: Fix missing error code in bnx2x_iov_init_one()Jiapeng Chong1-1/+3
[ Upstream commit 65161c35554f7135e6656b3df1ce2c500ca0bdcf ] Eliminate the follow smatch warning: drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:1227 bnx2x_iov_init_one() warn: missing error code 'err'. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-03bnxt_en: Fix context memory setup for 64K page size.Michael Chan2-8/+11
[ Upstream commit 702279d2ce4650000bb6302013630304e359dc13 ] There was a typo in the code that checks for 64K BNXT_PAGE_SHIFT in bnxt_hwrm_set_pg_attr(). Fix it and make the code more understandable with a new macro BNXT_SET_CTX_PAGE_ATTR(). Fixes: 1b9394e5a2ad ("bnxt_en: Configure context memory on new devices.") Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-03bnxt_en: Include new P5 HV definition in VF check.Andy Gospodarek1-1/+2
[ Upstream commit ab21494be9dc7d62736c5fcd06be65d49df713ee ] Otherwise, some of the recently added HyperV VF IDs would not be recognized as VF devices and they would not initialize properly. Fixes: 7fbf359bb2c1 ("bnxt_en: Add PCI IDs for Hyper-V VF devices.") Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-03net: bnx2: Fix error return code in bnx2_init_board()Zhen Lei1-1/+1
[ Upstream commit 28c66b6da4087b8cfe81c2ec0a46eb6116dafda9 ] Fix to return -EPERM from the error handling case instead of 0, as done elsewhere in this function. Fixes: b6016b767397 ("[BNX2]: New Broadcom gigabit network driver.") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-19bnxt_en: Add PCI IDs for Hyper-V VF devices.Michael Chan1-1/+18
[ Upstream commit 7fbf359bb2c19c824cbb1954020680824f6ee5a5 ] Support VF device IDs used by the Hyper-V hypervisor. Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14bnxt_en: Fix RX consumer index logic in the error path.Michael Chan1-2/+4
[ Upstream commit bbd6f0a948139970f4a615dff189d9a503681a39 ] In bnxt_rx_pkt(), the RX buffers are expected to complete in order. If the RX consumer index indicates an out of order buffer completion, it means we are hitting a hardware bug and the driver will abort all remaining RX packets and reset the RX ring. The RX consumer index that we pass to bnxt_discard_rx() is not correct. We should be passing the current index (tmp_raw_cons) instead of the old index (raw_cons). This bug can cause us to be at the wrong index when trying to abort the next RX packet. It can crash like this: #0 [ffff9bbcdf5c39a8] machine_kexec at ffffffff9b05e007 #1 [ffff9bbcdf5c3a00] __crash_kexec at ffffffff9b111232 #2 [ffff9bbcdf5c3ad0] panic at ffffffff9b07d61e #3 [ffff9bbcdf5c3b50] oops_end at ffffffff9b030978 #4 [ffff9bbcdf5c3b78] no_context at ffffffff9b06aaf0 #5 [ffff9bbcdf5c3bd8] __bad_area_nosemaphore at ffffffff9b06ae2e #6 [ffff9bbcdf5c3c28] bad_area_nosemaphore at ffffffff9b06af24 #7 [ffff9bbcdf5c3c38] __do_page_fault at ffffffff9b06b67e #8 [ffff9bbcdf5c3cb0] do_page_fault at ffffffff9b06bb12 #9 [ffff9bbcdf5c3ce0] page_fault at ffffffff9bc015c5 [exception RIP: bnxt_rx_pkt+237] RIP: ffffffffc0259cdd RSP: ffff9bbcdf5c3d98 RFLAGS: 00010213 RAX: 000000005dd8097f RBX: ffff9ba4cb11b7e0 RCX: ffffa923cf6e9000 RDX: 0000000000000fff RSI: 0000000000000627 RDI: 0000000000001000 RBP: ffff9bbcdf5c3e60 R8: 0000000000420003 R9: 000000000000020d R10: ffffa923cf6ec138 R11: ffff9bbcdf5c3e83 R12: ffff9ba4d6f928c0 R13: ffff9ba4cac28080 R14: ffff9ba4cb11b7f0 R15: ffff9ba4d5a30000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 Fixes: a1b0e4e684e9 ("bnxt_en: Improve RX consumer index validity check.") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-14bnxt_en: fix ternary sign extension bug in bnxt_show_temp()Dan Carpenter1-1/+3
[ Upstream commit 27537929f30d3136a71ef29db56127a33c92dad7 ] The problem is that bnxt_show_temp() returns long but "rc" is an int and "len" is a u32. With ternary operations the type promotion is quite tricky. The negative "rc" is first promoted to u32 and then to long so it ends up being a high positive value instead of a a negative as we intended. Fix this by removing the ternary. Fixes: d69753fa1ecb ("bnxt_en: return proper error codes in bnxt_show_temp") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-07net: broadcom: bcm4908enet: Fix a double free in bcm4908_enet_dma_allocLv Yunlong1-0/+1
In bcm4908_enet_dma_alloc, if callee bcm4908_dma_alloc_buf_descs() failed, it will free the ring->cpu_addr by dma_free_coherent() and return error. Then bcm4908_enet_dma_free() will be called, and free the same cpu_addr by dma_free_coherent() again. My patch set ring->cpu_addr to NULL after it is freed in bcm4908_dma_alloc_buf_descs() to avoid the double free. Fixes: 4feffeadbcb2e ("net: broadcom: bcm4908enet: add BCM4908 controller driver") Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-17net: broadcom: BCM4908_ENET should not default to y, unconditionallyGeert Uytterhoeven1-1/+1
Merely enabling compile-testing should not enable additional code. To fix this, restrict the automatic enabling of BCM4908_ENET to ARCH_BCM4908. Fixes: 4feffeadbcb2e5b1 ("net: broadcom: bcm4908enet: add BCM4908 controller driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-28net: broadcom: bcm4908_enet: enable RX after processing packetsRafał Miłecki1-0/+3
When receiving a lot of packets hardware may run out of free descriptiors and stop RX ring. Enable it every time after handling received packets. Fixes: 4feffeadbcb2 ("net: broadcom: bcm4908enet: add BCM4908 controller driver") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210226132038.29849-1-zajec5@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-27bnxt_en: reliably allocate IRQ table on reset to avoid crashEdwin Peer1-2/+12
The following trace excerpt corresponds with a NULL pointer dereference of 'bp->irq_tbl' in bnxt_setup_inta() on an Aarch64 system after many device resets: Unable to handle kernel NULL pointer dereference at ... 000000d ... pc : string+0x3c/0x80 lr : vsnprintf+0x294/0x7e0 sp : ffff00000f61ba70 pstate : 20000145 x29: ffff00000f61ba70 x28: 000000000000000d x27: ffff0000009c8b5a x26: ffff00000f61bb80 x25: ffff0000009c8b5a x24: 0000000000000012 x23: 00000000ffffffe0 x22: ffff000008990428 x21: ffff00000f61bb80 x20: 000000000000000d x19: 000000000000001f x18: 0000000000000000 x17: 0000000000000000 x16: ffff800b6d0fb400 x15: 0000000000000000 x14: ffff800b7fe31ae8 x13: 00001ed16472c920 x12: ffff000008c6b1c9 x11: ffff000008cf0580 x10: ffff00000f61bb80 x9 : 00000000ffffffd8 x8 : 000000000000000c x7 : ffff800b684b8000 x6 : 0000000000000000 x5 : 0000000000000065 x4 : 0000000000000001 x3 : ffff0a00ffffff04 x2 : 000000000000001f x1 : 0000000000000000 x0 : 000000000000000d Call trace: string+0x3c/0x80 vsnprintf+0x294/0x7e0 snprintf+0x44/0x50 __bnxt_open_nic+0x34c/0x928 [bnxt_en] bnxt_open+0xe8/0x238 [bnxt_en] __dev_open+0xbc/0x130 __dev_change_flags+0x12c/0x168 dev_change_flags+0x20/0x60 ... Ordinarily, a call to bnxt_setup_inta() (not in trace due to inlining) would not be expected on a system supporting MSIX at all. However, if bnxt_init_int_mode() does not end up being called after the call to bnxt_clear_int_mode() in bnxt_fw_reset_close(), then the driver will think that only INTA is supported and bp->irq_tbl will be NULL, causing the above crash. In the error recovery scenario, we call bnxt_clear_int_mode() in bnxt_fw_reset_close() early in the sequence. Ordinarily, we will call bnxt_init_int_mode() in bnxt_hwrm_if_change() after we reestablish communication with the firmware after reset. However, if the sequence has to abort before we call bnxt_init_int_mode() and if the user later attempts to re-open the device, then it will cause the crash above. We fix it in 2 ways: 1. Check for bp->irq_tbl in bnxt_setup_int_mode(). If it is NULL, call bnxt_init_init_mode(). 2. If we need to abort in bnxt_hwrm_if_change() and cannot complete the error recovery sequence, set the BNXT_STATE_ABORT_ERR flag. This will cause more drastic recovery at the next attempt to re-open the device, including a call to bnxt_init_int_mode(). Fixes: 3bc7d4a352ef ("bnxt_en: Add BNXT_STATE_IN_FW_RESET state.") Reviewed-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-27bnxt_en: Fix race between firmware reset and driver remove.Vasundhara Volam1-0/+3
The driver's error recovery reset sequence can take many seconds to complete and only the critical sections are protected by rtnl_lock. A recent change has introduced a regression in this sequence. bnxt_remove_one() may be called while the recovery is in progress. Normally, unregister_netdev() would cause bnxt_close_nic() to be called and this would cause the error recovery to safely abort with the BNXT_STATE_ABORT_ERR flag set in bnxt_close_nic(). Recently, we added bnxt_reinit_after_abort() to allow the user to reopen the device after an aborted recovery. This causes the regression in the scenario described above because we would attempt to re-open even after the netdev has been unregistered. Fix it by checking the netdev reg_state in bnxt_reinit_after_abort() and abort if it is unregistered. Fixes: 6882c36cf82e ("bnxt_en: attempt to reinitialize after aborted reset") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-25net: broadcom: bcm4908_enet: fix NAPI poll returned valueRafał Miłecki1-0/+2
Missing increment was resulting in poll function always returning 0 instead of amount of processed packets. Fixes: 4feffeadbcb2 ("net: broadcom: bcm4908enet: add BCM4908 controller driver") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210224151842.2419-2-zajec5@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-25net: broadcom: bcm4908_enet: fix RX path possible mem leakRafał Miłecki1-0/+1
After filling RX ring slot with new skb it's required to free old skb. Immediately on error or later in the net subsystem. Fixes: 4feffeadbcb2 ("net: broadcom: bcm4908enet: add BCM4908 controller driver") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210224151842.2419-1-zajec5@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-23bcm63xx_enet: fix sporadic kernel panicSieng Piaw Liew1-2/+6
In ndo_stop functions, netdev_completed_queue() is called during forced tx reclaim, after netdev_reset_queue(). This may trigger kernel panic if there is any tx skb left. This patch moves netdev_reset_queue() to after tx reclaim, so BQL can complete successfully then reset. Signed-off-by: Sieng Piaw Liew <liew.s.piaw@gmail.com> Fixes: 4c59b0f5543d ("bcm63xx_enet: add BQL support") Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210222013530.1356-1-liew.s.piaw@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-02-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2-3/+4
2021-02-17tg3: Remove unused PHY_BRCM flagsFlorian Fainelli1-6/+0
The tg3 driver tried to communicate towards the PHY driver whether it wanted RGMII in-band signaling enabled or disabled however there is nothing that looks at those flags in drivers/net/phy/broadcom.c so this does do not anything. Suggested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: phy: rename PHY_IGNORE_INTERRUPT to PHY_MAC_INTERRUPTHeiner Kallweit1-1/+1
Some internal PHY's have their events like link change reported by the MAC interrupt. We have PHY_IGNORE_INTERRUPT to deal with this scenario. I'm not too happy with this name. We don't ignore interrupts, typically there is no interrupt exposed at a PHY level. So let's rename it to PHY_MAC_INTERRUPT. This is in line with phy_mac_interrupt(), which is called from the MAC interrupt handler to handle PHY events. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16net: broadcom: bcm4908_enet: set MTU on open & on requestRafał Miłecki1-6/+25
Hardware comes up with default max frame size set to 1518. When using it with switch it results in actual Ethernet MTU 1492: 1518 - 14 (Ethernet header) - 4 (Broadcom's tag) - 4 (802.1q) - 4 (FCS) Above means hardware in its default state can't handle standard Ethernet traffic (MTU 1500). Define maximum possible Ethernet overhead and always set MAC max frame length accordingly. This change fixes handling Ethernet frames of length 1506 - 1514. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-15bnxt_en: Improve logging of error recovery settings information.Michael Chan1-7/+8
We currently only log the error recovery settings if it is enabled. In some cases, firmware disables error recovery after it was initially enabled. Without logging anything, the user will not be aware of this change in setting. Log it when error recovery is disabled. Also, change the reset count value from hexadecimal to decimal. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-15bnxt_en: Reply to firmware's echo request async message.Michael Chan2-0/+32
This is a new async message that the firmware can send to check if it can communicate with the driver. This is an added error detection scheme that firmware can use if it suspects errors in the PCIe interface. When the driver receives this async message, it will reply back echoing some data in the async message. If the firmware is not getting the reply with the proper data after some retries, error recovery will kick in. Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-15bnxt_en: Initialize "context kind" field for context memory blocks.Michael Chan1-5/+42
If firmware provides the offset to the "context kind" field of the relevant context memory blocks, we'll initialize just that field for each block instead of initializing all of context memory. Populate the bnxt_mem_init structure with the proper offset returned by firmware. If it is older firmware and the information is not available, we set the offset to an invalid value and fall back to the old behavior of initializing every byte. Otherwise, we initialize only the "context kind" byte at the offset. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-15bnxt_en: Add context memory initialization infrastructure.Michael Chan2-18/+53
Currently, the driver calls memset() to set all relevant context memory used by the chip to the initial value. This can take many milliseconds with the potentially large number of context pages allocated for the chip. To make this faster, we only need to initialize the "context kind" field of each block of context memory. This patch sets up the infrastructure to do that with the bnxt_mem_init structure. In the next patch, we'll add the logic to obtain the offset of the "context kind" from the firmware. This patch is not changing the current behavior of calling memset() to initialize all relevant context memory. Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-15bnxt_en: Implement faster recovery for firmware fatal error.Michael Chan1-0/+19
During some fatal firmware error conditions, the PCI config space register 0x2e which normally contains the subsystem ID will become 0xffff. This register will revert back to the normal value after the chip has completed core reset. If we detect this condition, we can poll this config register immediately for the value to revert. Because we use config read cycles to poll this register, there is no possibility of Master Abort if we happen to read it during core reset. This speeds up recovery significantly as we don't have to wait for the conservative min_time before polling MMIO to see if the firmware has come out of reset. As soon as this register changes value we can proceed to re-initialize the device. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-15bnxt_en: selectively allocate context memoriesEdwin Peer1-32/+52
Newer devices may have local context memory instead of relying on the host for backing store. In these cases, HWRM_FUNC_BACKING_STORE_QCAPS will return a zero entry size to indicate contexts for which the host should not allocate backing store. Selectively allocate context memory based on device capabilities and only enable backing store for the appropriate contexts. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-15bnxt_en: Update firmware interface spec to 1.10.2.16.Michael Chan2-11/+96
The main changes are the echo request/response from firmware for error detection and the NO_FCS feature to transmit frames without FCS. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12net: broadcom: bcm4908_enet: fix endianness in xmit codeRafał Miłecki1-1/+1
Use le32_to_cpu() for reading __le32 struct field filled by hw. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12net: broadcom: bcm4908_enet: fix received skb lengthRafał Miłecki1-1/+1
Use ETH_FCS_LEN instead of magic value and drop incorrect + 2 Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12net: broadcom: bcm4908_enet: fix minor typosRafał Miłecki1-5/+5
1. Fix "ensable" typo noticed by Andrew 2. Fix chipset name in the struct net_device_ops variable Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12net: broadcom: bcm4908_enet: drop "inline" from C functionsRafał Miłecki1-12/+7
It seems preferred to let compiler optimize code if applicable. While at it drop unused enet_umac_maskset(). Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12net: broadcom: bcm4908_enet: drop unneeded memset()Rafał Miłecki1-2/+0
dma_alloc_coherent takes care of zeroing allocated memory Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12net: broadcom: rename BCM4908 driver & update DT bindingRafał Miłecki4-111/+112
compatible string was updated to match normal naming convention so update driver as well Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12bnxt_en: Fix devlink info's stored fw.psid version format.Vasundhara Volam1-2/+2
The running fw.psid version is in decimal format but the stored fw.psid is in hex format. This can mislead the user to reset the NIC to activate the stored version to become the running version. Fix it to display the stored fw.psid in decimal format. Fixes: 1388875b3916 ("bnxt_en: Add stored FW version info to devlink info_get cb.") Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-12bnxt_en: reverse order of TX disable and carrier offEdwin Peer1-1/+2
A TX queue can potentially immediately timeout after it is stopped and the last TX timestamp on that queue was more than 5 seconds ago with carrier still up. Prevent these intermittent false TX timeouts by bringing down carrier first before calling netif_tx_disable(). Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-09net: broadcom: bcm4908enet: add BCM4908 controller driverRafał Miłecki4-0/+781
BCM4908 SoCs family uses Ethernel controller that includes UniMAC but uses different DMA engine (than other controllers) and requires different programming. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-27bnxt_en: Convert to use netif_level() helpers.Michael Chan1-20/+14
Use the various netif_level() helpers to simplify the C code. This was suggested by Joe Perches. Cc: Joe Perches <joe@perches.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/1611642024-3166-1-git-send-email-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-26bnxt_en: Do not process completion entries after fatal condition detected.Michael Chan1-0/+8
Once the firmware fatal condition is detected, we should cease comminication with the firmware and hardware quickly even if there are many completion entries in the completion rings. This will speed up the recovery process and prevent further I/Os that may cause further exceptions. Do not proceed in the NAPI poll function if fatal condition is detected. Call napi_complete() and return without arming interrupts. Cleanup of all rings and reset are imminent. Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-26bnxt_en: Consolidate firmware reset event logging.Michael Chan1-7/+10
Combine the three netdev_warn() calls into a single call, printed at the NETIF_MSG_HW log level. Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-26bnxt_en: Improve firmware fatal error shutdown sequence.Michael Chan1-3/+10
In the event of a fatal firmware error, firmware will notify the host and then it will proceed to do core reset when it sees that all functions have disabled Bus Master. To prevent Master Aborts and other hard errors, we need to quiesce all activities in addition to disabling Bus Master before the chip goes into core reset. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-26bnxt_en: Modify bnxt_disable_int_sync() to be called more than once.Michael Chan1-0/+3
In the event of a fatal firmware error, we want to disable IRQ early in the recovery sequence. This change will allow it to be called safely again as part of the normal shutdown sequence. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-26bnxt_en: Add a new BNXT_STATE_NAPI_DISABLED flag to keep track of NAPI state.Michael Chan2-1/+4
Up until now, we don't need to keep track of this state because NAPI is always enabled once and disabled once during bring up and shutdown. For better error recovery in subsequent patches, we want to quiesce the device earlier during fatal error conditions. The normal shutdown sequence will disable NAPI again and the flag will prevent disabling NAPI twice. Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-26bnxt_en: Add bnxt_fw_reset_timeout() helper.Michael Chan1-6/+9
This code to check if we have reached the maximum wait time after firmware reset is used multiple times. Add a helper function to do this. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-26bnxt_en: Retry open if firmware is in reset.Vasundhara Volam2-2/+14
Firmware may be in the middle of reset when the driver tries to do ifup. In that case, firmware will return a special error code and the driver will retry 10 times with 50 msecs delay after each retry. Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-26bnxt_en: attempt to reinitialize after aborted resetEdwin Peer1-2/+27
Drawing a hard line on aborted resets prevents a NIC open in some scenarios that may otherwise be recoverable. For example, if a firmware recovery happened while a PF was down and an attempt was made to bring up an associated VF in this state, then it was impossible to ever bring up this VF without a rebind or reload of its driver. Attempt to reinitialize the firmware when an aborted reset (or failed init after a reset) is discovered during open - it may succeed. Also take care to allow the user to retry opening the NIC even after an aborted reset. Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-16 18:53:49 +0300