summaryrefslogtreecommitdiff
path: root/drivers/net/dsa
AgeCommit message (Collapse)AuthorFilesLines
2017-09-20net: dsa: bcm_sf2: Use SF2_NUM_EGRESS_QUEUES for CFPFlorian Fainelli1-3/+3
The magic number 8 in 3 locations in bcm_sf2_cfp.c actually designates the number of switch port egress queues, so use that define instead of open-coding it. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20net: dsa: b53: Export b53_imp_vlan_setup()Florian Fainelli3-23/+4
bcm_sf2 and b53 do exactly the same thing, so share that piece. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20net: dsa: b53: Wire-up EEEFlorian Fainelli1-0/+10
Add support for enabling and disabling EEE, as well as re-negotiating it in .adjust_link() and in .port_enable(). Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20net: dsa: b53: Move EEE functions to b53Florian Fainelli5-65/+74
Move the bcm_sf2 EEE-related functions to the b53 driver because this is shared code amongst Gigabit capable switch, only 5325 and 5365 are too old to support that. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20net: dsa: b53: Define EEE register pageFlorian Fainelli1-0/+41
In preparation for migrating the EEE code from bcm_sf2 to b53, define the full EEE register page and offsets within that page. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20net: dsa: b53: Move Broadcom header setup to b53Florian Fainelli5-49/+57
The code to enable Broadcom tags/headers is largely switch independent, and in preparation for enabling it for multiple devices with b53, move the code we have in bcm_sf2.c to b53_common.c Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20net: dsa: b53: Use a macro to define I/O operationsFlorian Fainelli1-111/+22
Instead of repeating the same pattern: acquire mutex, read/write, release mutex, define a macro: b53_build_op() which takes the type (read|write), I/O size, and value (scalar or pointer). This helps with fixing bugs that could exist (e.g: missing barrier, lock etc.). Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20net: dsa: bcm_sf2: Defer port enabling to calling port_enableFlorian Fainelli1-6/+3
There is no need to configure the enabled ports once in bcm_sf2_sw_setup() and then a second time around when dsa_switch_ops::port_enable is called, just do it when port_enable is called which is better in terms of power consumption and correctness. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20net: dsa: b53: Defer port enabling to calling port_enableFlorian Fainelli1-4/+5
There is no need to configure the enabled ports once in b53_setup() and then a second time around when dsa_switch_ops::port_enable is called, just do it when port_enable is called which is better in terms of power consumption and correctness. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20net: dsa: b53: Make b53_enable_cpu_port() take a port argumentFlorian Fainelli1-6/+5
In preparation for future changes allowing the configuring of multiple CPU ports, make b53_enable_cpu_port() take a port argument. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20net: dsa: b53: Remove is_cpu_port()Florian Fainelli1-5/+0
This is not used anywhere, so remove it. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
2017-09-05net: dsa: bcm_sf2: Configure IMP port TC2QOS mappingFlorian Fainelli1-0/+9
Even though TC2QOS mapping is for switch egress queues, we need to configure it correclty in order for the Broadcom tag ingress (CPU -> switch) queue selection to work correctly since there is a 1:1 mapping between switch egress queues and ingress queues. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-05net: dsa: bcm_sf2: Advertise number of egress queuesFlorian Fainelli2-1/+7
The switch supports 8 egress queues per port, so indicate that such that net/dsa/slave.c::dsa_slave_create can allocate the right number of TX queues. While at it use SF2_NUM_EGRESS_QUEUE as a define for the number of queues we support. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-04net: dsa: loop: Do not unregister invalid fixed PHYFlorian Fainelli1-1/+1
During error injection it was possible to crash in dsa_loop_exit() because of an attempt to unregister an invalid PHY. We actually want to the driver probing in dsa_loop_init() even though fixed_phy_register() may return an error to exercise how DSA deals with such cases, but we should not be crashing during driver removal. Fixes: 98cd1552ea27 ("net: dsa: Mock-up driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-4/+9
Three cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-31net: dsa: bcm_sf2: Fix number of CFP entries for BCM7278Florian Fainelli3-4/+9
BCM7278 has only 128 entries while BCM7445 has the full 256 entries set, fix that. Fixes: 7318166cacad ("net: dsa: bcm_sf2: Add support for ethtool::rxnfc") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-30net: dsa: make some structures constBhumika Goyal2-2/+2
Make these const as they are not modified anywhere. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-30net: dsa: bcm_sf2: Use correct I/O accessorsFlorian Fainelli1-6/+6
The Starfigther 2 driver currently uses __raw_{read,write}l which means native I/O endian. This works correctly for an ARM LE kernel (default) but fails miserably on an ARM BE (BE8) kernel where registers are kept little endian, so replace uses with {read,write}l_relaxed here which is what we want because this is all performance sensitive code. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-21net: dsa: mv88e6xxx: make irq_chip constBhumika Goyal2-2/+2
Make this const as it is only used in a copy operation. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-10net: dsa: make dsa_switch_ops constBhumika Goyal3-3/+3
Make these structures const as they are only stored in the ops field of a dsa_switch structure, which is const. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-0/+39
The UDP offload conflict is dealt with by simply taking what is in net-next where we have removed all of the UFO handling code entirely. The TCP conflict was a case of local variables in a function being removed from both net and net-next. In netvsc we had an assignment right next to where a missing set of u64 stats sync object inits were added. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09net: dsa: lan9303: Only allocate 3 portsEgil Hjelmeland1-1/+1
Save 2628 bytes on arm eabi by allocate only the required 3 ports. Now that ds->num_ports is correct: In net/dsa/tag_lan9303.c eliminate duplicate LAN9303_MAX_PORTS, use ds->num_ports. (Matching the pattern of other net/dsa/tag_xxx.c files.) Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-09net: dsa: mediatek: add adjust link support for user portsJohn Crispin2-0/+39
Manually adjust the port settings of user ports once PHY polling has completed. This patch extends the adjust_link callback to configure the per port PMCR register, applying the proper values polled from the PHY. Without this patch flow control was not always getting setup properly. Signed-off-by: Shashidhar Lakkavalli <shashidhar.lakkavalli@openmesh.com> Signed-off-by: Muciri Gatimu <muciri@openmesh.com> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-08net: dsa: Move FDB dump implementation inside DSAArkadi Sharshevsky6-71/+31
>From all switchdev devices only DSA requires special FDB dump. This is due to lack of ability for syncing the hardware learned FDBs with the bridge. Due to this it is removed from switchdev and moved inside DSA. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-08net: dsa: Remove support for MDB dump from DSA's driversArkadi Sharshevsky2-33/+0
This is done as a preparation before removing support for MDB dump from DSA core. The MDBs are synced with the bridge and thus there is no need for special dump operation support. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-08net: dsa: Remove support for vlan dump from DSA's driversArkadi Sharshevsky6-183/+0
This is done as a preparation before removing support for vlan dump from DSA core. The vlans are synced with the bridge and thus there is no need for special dump operation support. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-08net: dsa: Remove prepare phase for FDBArkadi Sharshevsky7-87/+27
The prepare phase for FDB add is unneeded because most of DSA devices can have failures during bus transactions (SPI, I2C, etc.), thus, the prepare phase cannot guarantee success of the commit stage. The support for learning FDB through notification chain, which will be introduced in the following patches, will provide the ability to notify back the bridge about successful offload. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-08net: dsa: Change DSA slave FDB API to be switchdev independentArkadi Sharshevsky6-54/+41
In order to support FDB add/del to be on a notifier chain the slave API need to be changed to be switchdev independent. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-08net: dsa: lan9303: refactor lan9303_get_ethtool_statsEgil Hjelmeland1-10/+16
In lan9303_get_ethtool_stats: Get rid of 0x400 constant magic by using new lan9303_read_switch_reg() inside loop. Reduced scope of two variables. Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-08net: dsa: lan9303: Rename lan9303_xxx_packet_processing()Egil Hjelmeland1-8/+8
The lan9303_enable_packet_processing, lan9303_disable_packet_processing functions operate on port, so the names should reflect that. And to align with lan9303_disable_processing(), rename: lan9303_enable_packet_processing -> lan9303_enable_processing_port lan9303_disable_packet_processing -> lan9303_disable_processing_port Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-08net: dsa: lan9303: Simplify lan9303_xxx_packet_processing() usageEgil Hjelmeland1-14/+10
Simplify usage of lan9303_enable_packet_processing, lan9303_disable_packet_processing() Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-08net: dsa: lan9303: define LAN9303_NUM_PORTS 3Egil Hjelmeland1-0/+2
Will be used instead of '3' in upcomming patches. Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-08net: dsa: lan9303: Change lan9303_xxx_packet_processing() port param.Egil Hjelmeland1-23/+23
lan9303_enable_packet_processing, lan9303_disable_packet_processing() Pass port number (0,1,2) as parameter instead of port offset. Because other functions in the module pass port numbers. And to enable simplifications in following patch. Introduce lan9303_write_switch_port(). Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-03net: dsa: bcm_sf2: dst in not an arrayVivien Didelot1-2/+2
It's been a while now since ds->dst is not an array anymore, but a simple pointer to a dsa_switch_tree. Fortunately, SF2 does not support multi-chip and thus ds->index is always 0. This patch substitutes 'ds->dst[ds->index].' with 'ds->dst->'. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02net: dsa: rename switch EEE opsVivien Didelot3-17/+16
To avoid confusion with the PHY EEE settings, rename the .set_eee and .get_eee ops to respectively .set_mac_eee and .get_mac_eee. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02net: dsa: mv88e6xxx: remove EEE supportVivien Didelot6-214/+4
The PHY's EEE settings are already accessed by the DSA layer through the Marvell PHY driver and there is nothing to be done for switch's MACs. Remove all EEE support from the mv88e6xxx driver and simply return 0 from the EEE ops. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02net: dsa: remove PHY device argument from .set_eeeVivien Didelot3-13/+4
The DSA switch operations for EEE are only meant to configure a port's MAC EEE settings. The port's PHY EEE settings are accessed by the DSA layer and must be made available via a proper PHY driver. In order to reduce this confusion, remove the phy_device argument from the .set_eee operation. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02net: dsa: call phy_init_eee in DSA layerVivien Didelot4-44/+3
All DSA drivers are calling phy_init_eee if eee_enabled is true. Move up this statement in the DSA layer to simplify the DSA drivers. qca8k does not require to cache the ethtool_eee structures from now on. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02net: dsa: mv88e6xxx: call phy_init_eeeVivien Didelot1-0/+6
It is safer to init the EEE before the DSA layer call phy_ethtool_set_eee, as sf2 and qca8k are doing. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02net: dsa: bcm_sf2: remove unneeded supported flagsVivien Didelot1-4/+0
The SF2 driver is masking the supported bitfield of its private copy of the ports' ethtool_eee structures. It is used nowhere, thus remove it. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02net: dsa: qca8k: empty qca8k_get_eeeVivien Didelot1-10/+2
phy_ethtool_get_eee is already called by the DSA layer, thus remove the duplicated call in the qca8k driver. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02net: dsa: qca8k: do not cache unneeded EEE fieldsVivien Didelot1-10/+1
The qca8k driver is currently caching a bitfield of the supported member of a ethtool_eee private structure, which is unused. Only the eee_enabled field of the private ethtool_eee copy is updated, thus using p->advertised and p->lp_advertised is also erroneous. Remove the usage of these private ethtool_eee members and only rely on phy_ethtool_get_eee to assign the eee_active member. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02net: dsa: qca8k: enable EEE onceVivien Didelot1-2/+3
If EEE is queried enabled, qca8k_set_eee calls qca8k_eee_enable_set twice (because it is already called in qca8k_eee_init). Fix that. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02net: dsa: qca8k: fix EEE initVivien Didelot1-2/+2
The qca8k obviously copied code from the sf2 driver as how to set EEE: if (e->eee_enabled) { p->eee_enabled = qca8k_eee_init(ds, port, phydev); if (!p->eee_enabled) ret = -EOPNOTSUPP; } But it did not use the same logic for the EEE init routine, which is "Returns 0 if EEE was not enabled, or 1 otherwise". This results in returning -EOPNOTSUPP on success and caching EEE enabled on failure. This patch fixes the returned value of qca8k_eee_init. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-31net: dsa: lan9303: MDIO access phy registers directlyEgil Hjelmeland4-7/+47
Indirect access (PMI) to phy register only work in I2C mode. In MDIO mode phy registers must be accessed directly. Introduced struct lan9303_phy_ops to handle the two modes. Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-31net: dsa: lan9303: Renamed indirect phy access functionsEgil Hjelmeland1-14/+14
Preparing for the following fix of MDIO phy access: Renamed functions that access PHY 1 and 2 indirectly through PMI registers. lan9303_port_phy_reg_wait_for_completion() to lan9303_indirect_phy_wait_for_completion() lan9303_port_phy_reg_read() to lan9303_indirect_phy_read() lan9303_port_phy_reg_write() to lan9303_indirect_phy_write() Also changed "val" parameter of lan9303_indirect_phy_write() to u16, for clarity. Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-31net: dsa: lan9303: Multiply by 4 to get MDIO registerEgil Hjelmeland2-0/+8
lan9303_mdio_write()/_read() must multiply register number by 4 to get offset. Added some commments to the register definitions. Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-31net: dsa: lan9303: Fix lan9303_detect_phy_setup() for MDIOEgil Hjelmeland1-1/+2
Handle that MDIO read with no response return 0xffff. Signed-off-by: Egil Hjelmeland <privat@egil-hjelmeland.no> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-24net: Convert to using %pOF instead of full_nameRob Herring1-1/+1
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-12 20:27:38 +0300