summaryrefslogtreecommitdiff
path: root/drivers/net/dsa/b53
AgeCommit message (Collapse)AuthorFilesLines
2017-10-27net: dsa: add dsa_is_unused_port helperVivien Didelot1-1/+1
As the comment above the chunk states, the b53 driver attempts to disable the unused ports. But using ds->enabled_port_mask is misleading, because this mask reports in fact the user ports. To avoid confusion and fix this, this patch introduces an explicit dsa_is_unused_port helper which ensures the corresponding bit is not masked in any of the switch port masks. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-18net: dsa: add dsa_to_port helperVivien Didelot1-2/+2
The dsa_port structure is part of DSA core data and must only be updated by the later. It is OK and sometimes necessary for the DSA drivers to access this data, but this has to be read only. For that purpose, add a dsa_to_port() helper which returns a const pointer to a dsa_port structure which must be used by DSA drivers from now on instead of digging into ds->ports[] themselves. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-22net: dsa: use dedicated CPU portVivien Didelot1-2/+2
Each port in DSA has its own dedicated CPU port currently available in its parent switch's ds->ports[port].cpu_dp. Use it instead of getting the unique tree CPU port, which will be deprecated soon. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20net: dsa: bcm_sf2: Utilize b53_{enable, disable}_portFlorian Fainelli2-4/+6
Export b53_{enable,disable}_port and use these two functions in bcm_sf2_port_setup and bcm_sf2_port_disable. The generic functions cannot be used without wrapping because we need to manage additional switch integration details (PHY, Broadcom tag etc.). Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20net: dsa: b53: Export b53_imp_vlan_setup()Florian Fainelli2-1/+3
bcm_sf2 and b53 do exactly the same thing, so share that piece. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20net: dsa: b53: Wire-up EEEFlorian Fainelli1-0/+10
Add support for enabling and disabling EEE, as well as re-negotiating it in .adjust_link() and in .port_enable(). Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20net: dsa: b53: Move EEE functions to b53Florian Fainelli2-0/+68
Move the bcm_sf2 EEE-related functions to the b53 driver because this is shared code amongst Gigabit capable switch, only 5325 and 5365 are too old to support that. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20net: dsa: b53: Define EEE register pageFlorian Fainelli1-0/+41
In preparation for migrating the EEE code from bcm_sf2 to b53, define the full EEE register page and offsets within that page. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20net: dsa: b53: Move Broadcom header setup to b53Florian Fainelli3-0/+55
The code to enable Broadcom tags/headers is largely switch independent, and in preparation for enabling it for multiple devices with b53, move the code we have in bcm_sf2.c to b53_common.c Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20net: dsa: b53: Use a macro to define I/O operationsFlorian Fainelli1-111/+22
Instead of repeating the same pattern: acquire mutex, read/write, release mutex, define a macro: b53_build_op() which takes the type (read|write), I/O size, and value (scalar or pointer). This helps with fixing bugs that could exist (e.g: missing barrier, lock etc.). Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20net: dsa: b53: Defer port enabling to calling port_enableFlorian Fainelli1-4/+5
There is no need to configure the enabled ports once in b53_setup() and then a second time around when dsa_switch_ops::port_enable is called, just do it when port_enable is called which is better in terms of power consumption and correctness. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20net: dsa: b53: Make b53_enable_cpu_port() take a port argumentFlorian Fainelli1-6/+5
In preparation for future changes allowing the configuring of multiple CPU ports, make b53_enable_cpu_port() take a port argument. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-20net: dsa: b53: Remove is_cpu_port()Florian Fainelli1-5/+0
This is not used anywhere, so remove it. Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-08net: dsa: Move FDB dump implementation inside DSAArkadi Sharshevsky2-13/+6
>From all switchdev devices only DSA requires special FDB dump. This is due to lack of ability for syncing the hardware learned FDBs with the bridge. Due to this it is removed from switchdev and moved inside DSA. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-08net: dsa: Remove support for vlan dump from DSA's driversArkadi Sharshevsky2-47/+0
This is done as a preparation before removing support for vlan dump from DSA core. The vlans are synced with the bridge and thus there is no need for special dump operation support. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-08net: dsa: Remove prepare phase for FDBArkadi Sharshevsky2-18/+5
The prepare phase for FDB add is unneeded because most of DSA devices can have failures during bus transactions (SPI, I2C, etc.), thus, the prepare phase cannot guarantee success of the commit stage. The support for learning FDB through notification chain, which will be introduced in the following patches, will provide the ability to notify back the bridge about successful offload. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-08net: dsa: Change DSA slave FDB API to be switchdev independentArkadi Sharshevsky2-12/+8
In order to support FDB add/del to be on a notifier chain the slave API need to be changed to be switchdev independent. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-21net: dsa: b53: Add missing ARL entries for BCM53125Florian Fainelli1-0/+1
The BCM53125 entry was missing an arl_entries member which would basically prevent the ARL search from terminating properly. This switch has 4 ARL entries, so add that. Fixes: 1da6df85c6fb ("net: dsa: b53: Implement ARL add/del/dump operations") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-31net: dsa: remove dev arg of dsa_register_switchVivien Didelot1-1/+1
The current dsa_register_switch function takes a useless struct device pointer argument, which always equals ds->dev. Drivers either call it with ds->dev, or with the same device pointer passed to dsa_switch_alloc, which ends up being assigned to ds->dev. This patch removes the second argument of the dsa_register_switch and _dsa_register_switch functions. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-31net: dsa: b53: remove unused dev argumentVivien Didelot1-5/+3
The port net device passed to b53_fdb_copy is not used. Remove it. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18net: dsa: b53: Add compatible strings for the Cygnus-family BCM11360.Eric Anholt1-0/+2
Cygnus is a small family of SoCs, of which we currently have devicetree for BCM11360 and BCM58300. The 11360's B53 is mostly the same as 58xx, just requiring a tiny bit of setup that was previously missing. Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18net: dsa: use switchdev_obj_dump_cb_t everywhereVivien Didelot2-5/+5
Now that the DSA public header includes switchdev.h, use the provided switchdev_obj_dump_cb_t typedef for the object dump callback. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-18net: dsa: include switchdev.h only onceVivien Didelot1-1/+0
DSA drivers and core use switchdev. Include switchdev.h only once, in the dsa.h public header, so that inclusion in DSA drivers or forward declarations of switchdev structures in not necessary anymore. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-17net: dsa: store CPU port pointer in the treeVivien Didelot1-2/+2
A dsa_switch_tree instance holds a dsa_switch pointer and a port index to identify the switch port to which the CPU is attached. Now that the DSA layer has a dsa_port structure to hold this data, use it to point the switch CPU port. This patch simply substitutes s/dst->cpu_switch/dst->cpu_dp->ds/ and s/dst->cpu_port/dst->cpu_dp->index/. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25net: dsa: b53: Fix CPU port for 58xx devicesFlorian Fainelli1-1/+1
The 58xx devices (Northstar Plus) do actually have their CPU port wired at port 8, it was unfortunately set to port 5 (B53_CPU_PORT_25) which is incorrect, since that is the second possible management port. Fixes: 991a36bb4645 ("net: dsa: b53: Add support for BCM585xx/586xx/88312 integrated switch") Reported-by: Eric Anholt <eric@anholt.net> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25net: dsa: b53: Implement software reset for 58xx devicesFlorian Fainelli2-1/+25
Implement the correct software reset sequence for 58xx devices by setting all 3 reset bits and polling for the SW_RST bit to clear itself without a given timeout. We cannot use is58xx() here because that would also include the 7445/7278 Starfighter 2 which have their own driver doing the reset earlier on due to the HW specific integration. Fixes: 991a36bb4645 ("net: dsa: b53: Add support for BCM585xx/586xx/88312 integrated switch") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-25net: dsa: b53: Include IMP/CPU port in dumb forwarding modeFlorian Fainelli2-0/+14
Since Broadcom tags are not enabled in b53 (DSA_PROTO_TAG_NONE), we need to make sure that the IMP/CPU port is included in the forwarding decision. Without this change, switching between non-management ports would work, but not between management ports and non-management ports thus breaking the default state in which DSA switch are brought up. Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch") Reported-by: Eric Anholt <eric@anholt.net> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30net: dsa: b53: Add support for port mirroringFlorian Fainelli2-0/+71
Add support for configuring port mirroring through the cls_matchall classifier. We do a full ingress or egress capture towards the capture port. Future improvements could include leveraging the divider to allow less frames to be captured, as well as matching specific MAC DA/SA. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30net: dsa: b53: Add mirror capture register definitionsFlorian Fainelli1-0/+32
Add definitions for the different Roboswitch registers relevant for ingress and egress mirroring. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30net: dsa: b53: use dsa_port's bridge pointerVivien Didelot2-7/+3
Now that DSA exposes the bridge device pointer to which a port belongs, use it when programming the port based VLANs and thus remove the cache. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30net: dsa: pass bridge device when a port leavesVivien Didelot2-2/+2
Upon reception of the NETDEV_CHANGEUPPER, a leaving port is already unbridged, so reflect this by assigning the port's bridge_dev pointer to NULL before calling the port_bridge_leave DSA driver operation. Now that the bridge_dev pointer is exposed to the drivers, reflecting the current state of the DSA switch fabric is necessary for the drivers to adjust their port based VLANs correctly. Pass the bridge device pointer to the port_bridge_leave operation so that drivers have all information to re-program their chips properly, and do not need to cache it anymore. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-30net: dsa: variable number of portsVivien Didelot1-3/+4
Change the ports[DSA_MAX_PORTS] array of the dsa_switch structure for a zero-length array, allocated at the same time as the dsa_switch structure itself. A dsa_switch_alloc() helper is provided for that. This commit brings no functional change yet since we pass DSA_MAX_PORTS as the number of ports for the moment. Future patches can update the DSA drivers separately to support dynamic number of ports. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-26net: dsa: Pass device pointer to dsa_register_switchFlorian Fainelli1-1/+1
In preparation for allowing dsa_register_switch() to be supplied with device/platform data, pass down a struct device pointer instead of a struct device_node. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-24net: dsa: b53: Utilize mdio_module_driverFlorian Fainelli1-12/+1
Eliminate a bit of boilerplate code. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-23net: dsa: bcm_sf2: Add support for BCM7278 integrated switchFlorian Fainelli2-1/+15
Add support for the integrated switch found on BCM7278: - core_reg_align is set to 1, to force a translation into the target address space which is 8 bytes aligned - an alternate SWITCH_REG layout is provided since registers are largely bit/masks compatible but have different offsets - conditional for all CORE_STS_OVERRIDE_{IMP,GMII_P} since those got moved way out of the traditional register space Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09net: dsa: Make dsa_switch_ops constFlorian Fainelli1-1/+1
Now that we have properly encapsulated and made drivers utilize exported functions, we can switch dsa_switch_ops to be a annotated with const. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09net: dsa: b53: Export most operations to other driversFlorian Fainelli2-33/+79
In preparation for making dsa_switch_ops const, export b53 operations utilized by other drivers such as bcm_sf2. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-06net: dsa: b53: Utilize common helpers for u64/MACFlorian Fainelli2-22/+4
Utilize the two functions recently introduced: u64_to_ether() and ether_to_u64() instead of our own versions. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-17net: dsa: b53: Fix VLAN usage and how we treat CPU portFlorian Fainelli1-12/+4
We currently have a fundamental problem in how we treat the CPU port and its VLAN membership. As soon as a second VLAN is configured to be untagged, the CPU automatically becomes untagged for that VLAN as well, and yet, we don't gracefully make sure that the CPU becomes tagged in the other VLANs it could be a member of. This results in only one VLAN being effectively usable from the CPU's perspective. Instead of having some pretty complex logic which tries to maintain the CPU port's default VLAN and its untagged properties, just do something very simple which consists in neither altering the CPU port's PVID settings, nor its untagged settings: - whenever a VLAN is added, the CPU is automatically a member of this VLAN group, as a tagged member - PVID settings for downstream ports do not alter the CPU port's PVID since it now is part of all VLANs in the system This means that a typical example where e.g: LAN ports are in VLAN1, and WAN port is in VLAN2, now require having two VLAN interfaces for the host to properly terminate and send traffic from/to. Fixes: Fixes: a2482d2ce349 ("net: dsa: b53: Plug in VLAN support") Reported-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-17net: dsa: b53: Fix module autoloadJavier Martinez Canillas1-0/+1
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/net/dsa/b53/b53_mmap.ko | grep alias $ After this patch: $ modinfo drivers/net/dsa/b53/b53_mmap.ko | grep alias alias: of:N*T*Cbrcm,bcm63xx-switchC* alias: of:N*T*Cbrcm,bcm63xx-switch alias: of:N*T*Cbrcm,bcm6368-switchC* alias: of:N*T*Cbrcm,bcm6368-switch alias: of:N*T*Cbrcm,bcm6328-switchC* alias: of:N*T*Cbrcm,bcm6328-switch alias: of:N*T*Cbrcm,bcm3384-switchC* alias: of:N*T*Cbrcm,bcm3384-switch Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-12treewide: remove redundant #include <linux/kconfig.h>Masahiro Yamada1-1/+0
Kernel source files need not include <linux/kconfig.h> explicitly because the top Makefile forces to include it with: -include $(srctree)/include/linux/kconfig.h This commit removes explicit includes except the following: * arch/s390/include/asm/facilities_src.h * tools/testing/radix-tree/linux/kernel.h These two are used for host programs. Link: http://lkml.kernel.org/r/1473656164-11929-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-23net: dsa: b53: implement DSA port fast ageingVivien Didelot1-20/+11
Remove the fast ageing logic from b53_br_set_stp_state and implement the new DSA switch port_fast_age operation instead. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-20net-next: dsa: b53: remove empty set_addr() stubJohn Crispin1-6/+0
The set_addr() callback is now optional. Remove the empty stub that b53 has. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-16net: dsa: b53: Remove unused including <linux/version.h>Wei Yongjun1-1/+0
Remove including <linux/version.h> that don't need it. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-02net: dsa: remove ds_to_privVivien Didelot1-21/+21
Access the priv member of the dsa_switch structure directly, instead of having an unnecessary helper. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26net: dsa: b53: Add JOIN_ALL_VLAN supportFlorian Fainelli2-4/+29
In order to migrate the bcm_sf2 driver over to the b53 driver for most VLAN/FDB/bridge operations, we need to add support for the "join all VLANs" register and behavior which allows us to make a given port join all VLANs and avoid setting specific VLAN entries when it is leaving the bridge. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26net: dsa: b53: Define SF2 MIB layoutFlorian Fainelli2-0/+69
The 58xx and 7445 chips use the Starfighter2 code, define its MIB layout and introduce a helper function: is58xx() which checks for both of these IDs for now. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26net: dsa: b53: Prepare to support 7445 switchFlorian Fainelli2-0/+13
Allocate a device entry for the Broadcom BCM7445 integrated switch currently backed by bcm_sf2.c. Since this is the latest generation, it has 4 ARL entries, 4K VLANs and uses Port 8 for the CPU/IMP port. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-26net: dsa: b53: Initialize ds->ops in b53_switch_allocFlorian Fainelli1-2/+1
In order to allow drivers to override specific dsa_switch_driver callbacks, initialize ds->ops to b53_switch_ops earlier, which avoids having to expose this structure to glue drivers. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-25net: dsa: rename switch operations structureVivien Didelot1-2/+2
Now that the dsa_switch_driver structure contains only function pointers as it is supposed to, rename it to the more appropriate dsa_switch_ops, uniformly to any other operations structure in the kernel. No functional changes here, basically just the result of something like: s/dsa_switch_driver *drv/dsa_switch_ops *ops/g However keep the {un,}register_switch_driver functions and their dsa_switch_drivers list as is, since they represent the -- likely to be deprecated soon -- legacy DSA registration framework. In the meantime, also fix the following checks from checkpatch.pl to make it happy with this patch: CHECK: Comparison to NULL could be written "!ops" #403: FILE: net/dsa/dsa.c:470: + if (ops == NULL) { CHECK: Comparison to NULL could be written "ds->ops->get_strings" #773: FILE: net/dsa/slave.c:697: + if (ds->ops->get_strings != NULL) CHECK: Comparison to NULL could be written "ds->ops->get_ethtool_stats" #824: FILE: net/dsa/slave.c:785: + if (ds->ops->get_ethtool_stats != NULL) CHECK: Comparison to NULL could be written "ds->ops->get_sset_count" #835: FILE: net/dsa/slave.c:798: + if (ds->ops->get_sset_count != NULL) total: 0 errors, 0 warnings, 4 checks, 784 lines checked Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-03 18:50:59 +0300