summaryrefslogtreecommitdiff
path: root/drivers/net/cxgb3/t3_hw.c
AgeCommit message (Collapse)AuthorFilesLines
2007-10-11cxgb3 sparse warning fixesStephen Hemminger1-4/+4
Fix warnings from sparse related to shadowed variables and routines that should be declared static. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-11cxgb3 - CQ context operations time out too soon.Divy Le Ray1-8/+11
Currently, the driver only tries up to 5 times (5us) to get the results of a CQ context operation. Testing has shown the chip can take as much as 50us to return the response on SG_CONTEXT_CMD operations. So we up the retry count to 100 to cover high loads. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-11cxgb3 - Set the CQ_ERR bit in CQ contexts.Divy Le Ray1-1/+2
The cxgb3 driver is incorrectly configuring the HW CQ context for CQ's that use overflow-avoidance. Namely the RDMA control CQ. This results in a bad DMA from the device to bus address 0. The solution is to set the CQ_ERR bit in the context for these types of CQs. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-11cxgb3 - log and clear PEX errorsDivy Le Ray1-0/+6
Clear pciE PEX errors late at module load time. Log details when PEX errors occur. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-11cxgb3 - Firmware updateDivy Le Ray1-5/+15
Update firmware version. Allow the driver to be up and running with older FW image Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-11cxgb3 - Update internal memory managementDivy Le Ray1-0/+2
Set PM1 internal memory to round robin mode It balances access to this internal memory for multiport adapters. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-11cxgb3 - log adapter serial numberDivy Le Ray1-1/+2
Log HW serial number when cxgb3 module is loaded. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-31- cxgb3 engine microcode loadDivy Le Ray1-6/+40
Load the engine microcode when an interface is brought up, instead of of doing it when the module is loaded. Loosen up tight binding between the driver and the engine microcode version. There is no need for microcode update with T3A boards. Fix the file naming. Do a better job at logging the loading activity. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09cxgb3 - TP SRAM updateDivy Le Ray1-0/+86
The chip executes microcode present in internal RAM, whose content is loaded from EEPROM on power cycle. This patch allows an update of the microcode through PIO without forcing a power cycle. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09cxgb3 - Firmware updateDivy Le Ray1-19/+23
Update FW to 4.1. Proceed to subsequent HW tuning to improve RDMA perfs.. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-19cxgb3 - PHY interrupts and GPIO pins.Divy Le Ray1-6/+12
Remove assumption that PHY interrupts use GPIOs 3 and 5. Deal with PHY interrupts connected to any GPIO pins. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-04cxgb3 - detect NIC only adaptersDivy Le Ray1-6/+18
Differentiate NIC only adapters from RNICs. Initialize offload capabilities for RNICs only. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23cxgb3 - T3B2 pcie config spaceDivy Le Ray1-4/+6
T3B2 does not lose its pcie config space on reset. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23cxgb3 - Auto-load FW if mismatch detectedDivy Le Ray1-2/+3
The driver attempts to upgrade the FW if the card has the wrong version. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27cxgb3 - FW version updateDivy Le Ray1-2/+4
Update FW version to 3.2 Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-06cxgb3 - Add dual licensingDivy Le Ray1-9/+29
Dual licensing, needed for OFED 1.2 Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-06cxgb3 - white space to tabsDivy Le Ray1-15/+15
Use tabs in comments. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-06cxgb3 - Clean up HW init routineDivy Le Ray1-11/+5
Clean up the tp_config() routine. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-06cxgb3 - bogus status error stringDivy Le Ray1-1/+1
Remove a status error string from the pci-x context and add it where it belongs - the pci-e context. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-06cxgb3 - FW versioningDivy Le Ray1-5/+12
Clean up FW version checking. The supported FW version is now 3.1. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-06Add support for the latest 1G/10G Chelsio adapter, T3.Divy Le Ray1-0/+3354
This driver is required by the Chelsio T3 RDMA driver posted by Steve Wise. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>