summaryrefslogtreecommitdiff
path: root/drivers/net/can/usb
AgeCommit message (Collapse)AuthorFilesLines
2023-03-11can: esd_usb: Move mislocated storage of SJA1000_ECC_SEG bits in case of a ↵Frank Jungclaus1-1/+3
bus error [ Upstream commit 118469f88180438ef43dee93d71f77c00e7b425d ] Move the supply for cf->data[3] (bit stream position of CAN error), in case of a bus- or protocol-error, outside of the "switch (ecc & SJA1000_ECC_MASK){}"-statement, because this bit stream position is independent of the error type. Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device") Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu> Link: https://lore.kernel.org/all/20230216190450.3901254-2-frank.jungclaus@esd.eu Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-02-25can: kvaser_usb: hydra: help gcc-13 to figure out cmd_lenMarc Kleine-Budde1-9/+24
[ Upstream commit f006229135b7debf4037adb1eb93e358559593db ] Debian's gcc-13 [1] throws the following error in kvaser_usb_hydra_cmd_size(): [1] gcc version 13.0.0 20221214 (experimental) [master r13-4693-g512098a3316] (Debian 13-20221214-1) | drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c:502:65: error: | array subscript ‘struct kvaser_cmd_ext[0]’ is partly outside array | bounds of ‘unsigned char[32]’ [-Werror=array-bounds=] | 502 | ret = le16_to_cpu(((struct kvaser_cmd_ext *)cmd)->len); kvaser_usb_hydra_cmd_size() returns the size of given command. It depends on the command number (cmd->header.cmd_no). For extended commands (cmd->header.cmd_no == CMD_EXTENDED) the above shown code is executed. Help gcc to recognize that this code path is not taken in all cases, by calling kvaser_usb_hydra_cmd_size() directly after assigning the command number. Fixes: aec5fb2268b7 ("can: kvaser_usb: Add support for Kvaser USB hydra family") Cc: Jimmy Assarsson <extja@kvaser.com> Cc: Anssi Hannula <anssi.hannula@bitwise.fi> Link: https://lore.kernel.org/all/20221219110104.1073881-1-mkl@pengutronix.de Tested-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18can: kvaser_usb: Compare requested bittiming parameters with actual ↵Jimmy Assarsson4-41/+284
parameters in do_set_{,data}_bittiming [ Upstream commit 39d3df6b0ea80f9b515c632ca07b39b1c156edee ] The device will respond with a CMD_ERROR_EVENT command, with error_code KVASER_USB_{LEAF,HYDRA}_ERROR_EVENT_PARAM, if the CMD_SET_BUSPARAMS_REQ contains invalid bittiming parameters. However, this command does not contain any channel reference. To check if the CMD_SET_BUSPARAMS_REQ was successful, redback and compare the requested bittiming parameters with the device reported parameters. Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Fixes: aec5fb2268b7 ("can: kvaser_usb: Add support for Kvaser USB hydra family") Tested-by: Anssi Hannula <anssi.hannula@bitwise.fi> Co-developed-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010185237.319219-12-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18can: kvaser_usb: Add struct kvaser_usb_busparamsJimmy Assarsson3-31/+27
[ Upstream commit 00e5786177649c1e3110f9454fdd34e336597265 ] Add struct kvaser_usb_busparams containing the busparameters used in CMD_{SET,GET}_BUSPARAMS* commands. Tested-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010185237.319219-11-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Stable-dep-of: 39d3df6b0ea8 ("can: kvaser_usb: Compare requested bittiming parameters with actual parameters in do_set_{,data}_bittiming") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18can: kvaser_usb_leaf: Fix bogus restart eventsAnssi Hannula1-3/+3
[ Upstream commit 90904d326269a38fe5dd895fb2db7c03199654c4 ] When auto-restart is enabled, the kvaser_usb_leaf driver considers transition from any state >= CAN_STATE_BUS_OFF as a bus-off recovery event (restart). However, these events may occur at interface startup time before kvaser_usb_open() has set the state to CAN_STATE_ERROR_ACTIVE, causing restarts counter to increase and CAN_ERR_RESTARTED to be sent despite no actual restart having occurred. Fix that by making the auto-restart condition checks more strict so that they only trigger when the interface was actually in the BUS_OFF state. Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010185237.319219-10-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18can: kvaser_usb_leaf: Fix wrong CAN state after stoppingAnssi Hannula1-0/+4
[ Upstream commit a11249acf802341294557895d8e5f6aef080253f ] 0bfd:0124 Kvaser Mini PCI Express 2xHS FW 4.18.778 sends a CMD_CHIP_STATE_EVENT indicating bus-off after stopping the device, causing a stopped device to appear as CAN_STATE_BUS_OFF instead of CAN_STATE_STOPPED. Fix that by not handling error events on stopped devices. Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010185237.319219-8-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18can: kvaser_usb_leaf: Fix improved state not being reportedAnssi Hannula3-3/+81
[ Upstream commit 8d21f5927ae604881f98587fabf6753f88730968 ] The tested 0bfd:0017 Kvaser Memorator Professional HS/HS FW 2.0.50 and 0bfd:0124 Kvaser Mini PCI Express 2xHS FW 4.18.778 do not seem to send any unsolicited events when error counters decrease or when the device transitions from ERROR_PASSIVE to ERROR_ACTIVE (or WARNING). This causes the interface to e.g. indefinitely stay in the ERROR_PASSIVE state. Fix that by asking for chip state (inc. counters) event every 0.5 secs when error counters are non-zero. Since there are non-error-counter devices, also always poll in ERROR_PASSIVE even if the counters show zero. Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010185237.319219-7-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18can: kvaser_usb_leaf: Set Warning state even without bus errorsAnssi Hannula1-12/+8
[ Upstream commit df1b7af2761b935f63b4a53e789d41ed859edf61 ] kvaser_usb_leaf_rx_error_update_can_state() sets error state according to error counters when the hardware does not indicate a specific state directly. However, this is currently gated behind a check for M16C_STATE_BUS_ERROR which does not always seem to be set when error counters are increasing, and may not be set when error counters are decreasing. This causes the CAN_STATE_ERROR_WARNING state to not be set in some cases even when appropriate. Change the code to set error state from counters even without M16C_STATE_BUS_ERROR. The Error-Passive case seems superfluous as it is already set via M16C_STATE_BUS_PASSIVE flag above, but it is kept for now. Tested with 0bfd:0124 Kvaser Mini PCI Express 2xHS FW 4.18.778. Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010185237.319219-6-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18can: kvaser_usb: kvaser_usb_leaf: Handle CMD_ERROR_EVENTJimmy Assarsson1-0/+99
[ Upstream commit b24cb2d169e0c9dce664a959e1f2aa9781285dc9 ] The device will send an error event command, to indicate certain errors. This indicates a misbehaving driver, and should never occur. Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by: Anssi Hannula <anssi.hannula@bitwise.fi> Co-developed-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010185237.319219-5-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18can: kvaser_usb: kvaser_usb_leaf: Rename {leaf,usbcan}_cmd_error_event to ↵Jimmy Assarsson1-19/+19
{leaf,usbcan}_cmd_can_error_event [ Upstream commit 7ea56128dbf904a3359bcf9289cccdfa3c85c7e8 ] Prepare for handling CMD_ERROR_EVENT. Rename struct {leaf,usbcan}_cmd_error_event to {leaf,usbcan}_cmd_can_error_event. Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Reported-by: Anssi Hannula <anssi.hannula@bitwise.fi> Tested-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010185237.319219-4-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18can: kvaser_usb: kvaser_usb_leaf: Get capabilities from deviceJimmy Assarsson1-1/+143
[ Upstream commit 35364f5b41a4917fe94a3f393d149b63ec583297 ] Use the CMD_GET_CAPABILITIES_REQ command to query the device for certain capabilities. We are only interested in LISTENONLY mode and wither the device reports CAN error counters. Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Reported-by: Anssi Hannula <anssi.hannula@bitwise.fi> Tested-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010185237.319219-3-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18can: kvaser_usb: do not increase tx statistics when sending error message framesVincent Mailhol1-1/+6
[ Upstream commit 0b0ce2c67795672115ac6ca28351a78799cd114b ] The CAN error message frames (i.e. error skb) are an interface specific to socket CAN. The payload of the CAN error message frames does not correspond to any actual data sent on the wire. Only an error flag and a delimiter are transmitted when an error occurs (c.f. ISO 11898-1 section 10.4.4.2 "Error flag"). For this reason, it makes no sense to increment the tx_packets and tx_bytes fields of struct net_device_stats when sending an error message frame because no actual payload will be transmitted on the wire. N.B. Sending error message frames is a very specific feature which, at the moment, is only supported by the Kvaser Hydra hardware. Please refer to [1] for more details on the topic. [1] https://lore.kernel.org/linux-can/CAMZ6RqK0rTNg3u3mBpZOoY51jLZ-et-J01tY6-+mWsM4meVw-A@mail.gmail.com/t/#u Link: https://lore.kernel.org/all/20211207121531.42941-3-mailhol.vincent@wanadoo.fr Co-developed-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Stable-dep-of: 35364f5b41a4 ("can: kvaser_usb: kvaser_usb_leaf: Get capabilities from device") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-19can: mcba_usb: Fix termination command argumentYasushi SHOJI1-3/+7
[ Upstream commit 1a8e3bd25f1e789c8154e11ea24dc3ec5a4c1da0 ] Microchip USB Analyzer can activate the internal termination resistors by setting the "termination" option ON, or OFF to to deactivate them. As I've observed, both with my oscilloscope and captured USB packets below, you must send "0" to turn it ON, and "1" to turn it OFF. From the schematics in the user's guide, I can confirm that you must drive the CAN_RES signal LOW "0" to activate the resistors. Reverse the argument value of usb_msg.termination to fix this. These are the two commands sequence, ON then OFF. > No. Time Source Destination Protocol Length Info > 1 0.000000 host 1.3.1 USB 46 URB_BULK out > > Frame 1: 46 bytes on wire (368 bits), 46 bytes captured (368 bits) > USB URB > Leftover Capture Data: a80000000000000000000000000000000000a8 > > No. Time Source Destination Protocol Length Info > 2 4.372547 host 1.3.1 USB 46 URB_BULK out > > Frame 2: 46 bytes on wire (368 bits), 46 bytes captured (368 bits) > USB URB > Leftover Capture Data: a80100000000000000000000000000000000a9 Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com> Link: https://lore.kernel.org/all/20221124152504.125994-1-yashi@spacecubics.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14can: esd_usb: Allow REC and TEC to return to zeroFrank Jungclaus1-0/+6
[ Upstream commit 918ee4911f7a41fb4505dff877c1d7f9f64eb43e ] We don't get any further EVENT from an esd CAN USB device for changes on REC or TEC while those counters converge to 0 (with ecc == 0). So when handling the "Back to Error Active"-event force txerr = rxerr = 0, otherwise the berr-counters might stay on values like 95 forever. Also, to make life easier during the ongoing development a netdev_dbg() has been introduced to allow dumping error events send by an esd CAN USB device. Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device") Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu> Link: https://lore.kernel.org/all/20221130202242.3998219-2-frank.jungclaus@esd.eu Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-03can: kvaser_usb: Fix possible completions during init_completionAnssi Hannula2-4/+4
commit 2871edb32f4622c3a25ce4b3977bad9050b91974 upstream. kvaser_usb uses completions to signal when a response event is received for outgoing commands. However, it uses init_completion() to reinitialize the start_comp and stop_comp completions before sending the start/stop commands. In case the device sends the corresponding response just before the actual command is sent, complete() may be called concurrently with init_completion() which is not safe. This might be triggerable even with a properly functioning device by stopping the interface (CMD_STOP_CHIP) just after it goes bus-off (which also causes the driver to send CMD_STOP_CHIP when restart-ms is off), but that was not tested. Fix the issue by using reinit_completion() instead. Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010185237.319219-2-extja@kvaser.com Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-26can: kvaser_usb_leaf: Fix CAN state after restartAnssi Hannula1-0/+2
commit 0be1a655fe68c8e6dcadbcbddb69cf2fb29881f5 upstream. can_restart() expects CMD_START_CHIP to set the error state to ERROR_ACTIVE as it calls netif_carrier_on() immediately afterwards. Otherwise the user may immediately trigger restart again and hit a BUG_ON() in can_restart(). Fix kvaser_usb_leaf set_mode(CMD_START_CHIP) to set the expected state. Cc: stable@vger.kernel.org Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010150829.199676-5-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-26can: kvaser_usb_leaf: Fix TX queue out of sync after restartAnssi Hannula3-1/+5
commit 455561fb618fde40558776b5b8435f9420f335db upstream. The TX queue seems to be implicitly flushed by the hardware during bus-off or bus-off recovery, but the driver does not reset the TX bookkeeping. Despite not resetting TX bookkeeping the driver still re-enables TX queue unconditionally, leading to "cannot find free context" / NETDEV_TX_BUSY errors if the TX queue was full at bus-off time. Fix that by resetting TX bookkeeping on CAN restart. Tested with 0bfd:0124 Kvaser Mini PCI Express 2xHS FW 4.18.778. Cc: stable@vger.kernel.org Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010150829.199676-4-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-26can: kvaser_usb_leaf: Fix overread with an invalid commandAnssi Hannula1-0/+75
commit 1499ecaea9d2ba68d5e18d80573b4561a8dc4ee7 upstream. For command events read from the device, kvaser_usb_leaf_read_bulk_callback() verifies that cmd->len does not exceed the size of the received data, but the actual kvaser_cmd handlers will happily read any kvaser_cmd fields without checking for cmd->len. This can cause an overread if the last cmd in the buffer is shorter than expected for the command type (with cmd->len showing the actual short size). Maximum overread seems to be 22 bytes (CMD_LEAF_LOG_MESSAGE), some of which are delivered to userspace as-is. Fix that by verifying the length of command before handling it. This issue can only occur after RX URBs have been set up, i.e. the interface has been opened at least once. Cc: stable@vger.kernel.org Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010150829.199676-2-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-26can: kvaser_usb: Fix use of uninitialized completionAnssi Hannula2-1/+2
commit cd7f30e174d09a02ca2afa5ef093fb0f0352e0d8 upstream. flush_comp is initialized when CMD_FLUSH_QUEUE is sent to the device and completed when the device sends CMD_FLUSH_QUEUE_RESP. This causes completion of uninitialized completion if the device sends CMD_FLUSH_QUEUE_RESP before CMD_FLUSH_QUEUE is ever sent (e.g. as a response to a flush by a previously bound driver, or a misbehaving device). Fix that by initializing flush_comp in kvaser_usb_init_one() like the other completions. This issue is only triggerable after RX URBs have been set up, i.e. the interface has been opened at least once. Cc: stable@vger.kernel.org Fixes: aec5fb2268b7 ("can: kvaser_usb: Add support for Kvaser USB hydra family") Tested-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010150829.199676-3-extja@kvaser.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-28can: gs_usb: gs_can_open(): fix race dev->can.state conditionMarc Kleine-Budde1-2/+2
[ Upstream commit 5440428b3da65408dba0241985acb7a05258b85e ] The dev->can.state is set to CAN_STATE_ERROR_ACTIVE, after the device has been started. On busy networks the CAN controller might receive CAN frame between and go into an error state before the dev->can.state is assigned. Assign dev->can.state before starting the controller to close the race window. Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://lore.kernel.org/all/20220920195216.232481-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25can: ems_usb: fix clang's -Wunaligned-access warningMarc Kleine-Budde1-1/+1
commit a4cb6e62ea4d36e53fb3c0f18ea4503d7b76674f upstream. clang emits a -Wunaligned-access warning on struct __packed ems_cpc_msg. The reason is that the anonymous union msg (not declared as packed) is being packed right after some non naturally aligned variables (3*8 bits + 2*32) inside a packed struct: | struct __packed ems_cpc_msg { | u8 type; /* type of message */ | u8 length; /* length of data within union 'msg' */ | u8 msgid; /* confirmation handle */ | __le32 ts_sec; /* timestamp in seconds */ | __le32 ts_nsec; /* timestamp in nano seconds */ | /* ^ not naturally aligned */ | | union { | /* ^ not declared as packed */ | u8 generic[64]; | struct cpc_can_msg can_msg; | struct cpc_can_params can_params; | struct cpc_confirm confirmation; | struct cpc_overrun overrun; | struct cpc_can_error error; | struct cpc_can_err_counter err_counter; | u8 can_state; | } msg; | }; Starting from LLVM 14, having an unpacked struct nested in a packed struct triggers a warning. c.f. [1]. Fix the warning by marking the anonymous union as packed. [1] https://github.com/llvm/llvm-project/issues/55520 Fixes: 702171adeed3 ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface") Link: https://lore.kernel.org/all/20220802094021.959858-1-mkl@pengutronix.de Cc: Gerhard Uttenthaler <uttenthaler@ems-wuensche.com> Cc: Sebastian Haas <haas@ems-wuensche.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25can: usb_8dev: do not report txerr and rxerr during bus-offVincent Mailhol1-3/+4
[ Upstream commit aebe8a2433cd090ccdc222861f44bddb75eb01de ] During bus off, the error count is greater than 255 and can not fit in a u8. Fixes: 0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices") Link: https://lore.kernel.org/all/20220719143550.3681-10-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25can: kvaser_usb_leaf: do not report txerr and rxerr during bus-offVincent Mailhol1-2/+4
[ Upstream commit a57732084e06791d37ea1ea447cca46220737abd ] During bus off, the error count is greater than 255 and can not fit in a u8. Fixes: 7259124eac7d1 ("can: kvaser_usb: Split driver into kvaser_usb_core.c and kvaser_usb_leaf.c") Link: https://lore.kernel.org/all/20220719143550.3681-9-mailhol.vincent@wanadoo.fr CC: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25can: kvaser_usb_hydra: do not report txerr and rxerr during bus-offVincent Mailhol1-4/+8
[ Upstream commit 936e90595376e64b6247c72d3ea8b8b164b7ac96 ] During bus off, the error count is greater than 255 and can not fit in a u8. Fixes: aec5fb2268b7 ("can: kvaser_usb: Add support for Kvaser USB hydra family") Link: https://lore.kernel.org/all/20220719143550.3681-8-mailhol.vincent@wanadoo.fr CC: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-12can: kvaser_usb: kvaser_usb_leaf: fix bittiming limitsJimmy Assarsson3-35/+47
commit b3b6df2c56d80b8c6740433cff5f016668b8de70 upstream. Use correct bittiming limits depending on device. For devices based on USBcanII, Leaf M32C or Leaf i.MX28. Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Fixes: b4f20130af23 ("can: kvaser_usb: add support for Kvaser Leaf v2 and usb mini PCIe") Fixes: f5d4abea3ce0 ("can: kvaser_usb: Add support for the USBcan-II family") Link: https://lore.kernel.org/all/20220603083820.800246-4-extja@kvaser.com Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson <extja@kvaser.com> [mkl: remove stray netlink.h include] [mkl: keep struct can_bittiming_const kvaser_usb_flexc_bittiming_const in kvaser_usb_hydra.c] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-12can: kvaser_usb: kvaser_usb_leaf: fix CAN clock frequency regressionJimmy Assarsson3-19/+36
commit e6c80e601053ffdac5709f11ff3ec1e19ed05f7b upstream. The firmware of M32C based Leaf devices expects bittiming parameters calculated for 16MHz clock. Since we use the actual clock frequency of the device, the device may end up with wrong bittiming parameters, depending on user requested parameters. This regression affects M32C based Leaf devices with non-16MHz clock. Fixes: 68daa476f499 ("can: kvaser_usb: get CAN clock frequency from device") Link: https://lore.kernel.org/all/20220603083820.800246-3-extja@kvaser.com Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-12can: kvaser_usb: replace run-time checks with struct kvaser_usb_driver_infoJimmy Assarsson3-135/+155
commit 49f274c72357d2d74cba70b172cf369768909707 upstream. Unify and move compile-time known information into new struct kvaser_usb_driver_info, in favor of run-time checks. All Kvaser USBcanII supports listen-only mode and error counter reporting. Link: https://lore.kernel.org/all/20220603083820.800246-2-extja@kvaser.com Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson <extja@kvaser.com> [mkl: move struct kvaser_usb_driver_info into kvaser_usb_core.c] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-12can: gs_usb: gs_usb_open/close(): fix memory leakRhett Aultman1-2/+21
commit 2bda24ef95c0311ab93bda00db40486acf30bd0a upstream. The gs_usb driver appears to suffer from a malady common to many USB CAN adapter drivers in that it performs usb_alloc_coherent() to allocate a number of USB request blocks (URBs) for RX, and then later relies on usb_kill_anchored_urbs() to free them, but this doesn't actually free them. As a result, this may be leaking DMA memory that's been used by the driver. This commit is an adaptation of the techniques found in the esd_usb2 driver where a similar design pattern led to a memory leak. It explicitly frees the RX URBs and their DMA memory via a call to usb_free_coherent(). Since the RX URBs were allocated in the gs_can_open(), we remove them in gs_can_close() rather than in the disconnect function as was done in esd_usb2. For more information, see the 928150fad41b ("can: esd_usb2: fix memory leak"). Link: https://lore.kernel.org/all/alpine.DEB.2.22.394.2206031547001.1630869@thelappy Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Cc: stable@vger.kernel.org Signed-off-by: Rhett Aultman <rhett.aultman@samsara.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-27can: usb_8dev: usb_8dev_start_xmit(): fix double dev_kfree_skb() in error pathHangyu Hua1-16/+14
commit 3d3925ff6433f98992685a9679613a2cc97f3ce2 upstream. There is no need to call dev_kfree_skb() when usb_submit_urb() fails because can_put_echo_skb() deletes original skb and can_free_echo_skb() deletes the cloned skb. Fixes: 0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices") Link: https://lore.kernel.org/all/20220311080614.45229-1-hbh25y@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> [DP: adjusted params of can_free_echo_skb() for 5.4 stable] Signed-off-by: Dragos-Marian Panait <dragos.panait@windriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15can: mcba_usb: properly check endpoint typePavel Skripkin1-10/+16
commit 136bed0bfd3bc9c95c88aafff2d22ecb3a919f23 upstream. Syzbot reported warning in usb_submit_urb() which is caused by wrong endpoint type. We should check that in endpoint is actually present to prevent this warning. Found pipes are now saved to struct mcba_priv and code uses them directly instead of making pipes in place. Fail log: | usb 5-1: BOGUS urb xfer, pipe 3 != type 1 | WARNING: CPU: 1 PID: 49 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502 | Modules linked in: | CPU: 1 PID: 49 Comm: kworker/1:2 Not tainted 5.17.0-rc6-syzkaller-00184-g38f80f42147f #0 | Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 | Workqueue: usb_hub_wq hub_event | RIP: 0010:usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502 | ... | Call Trace: | <TASK> | mcba_usb_start drivers/net/can/usb/mcba_usb.c:662 [inline] | mcba_usb_probe+0x8a3/0xc50 drivers/net/can/usb/mcba_usb.c:858 | usb_probe_interface+0x315/0x7f0 drivers/usb/core/driver.c:396 | call_driver_probe drivers/base/dd.c:517 [inline] Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer") Link: https://lore.kernel.org/all/20220313100903.10868-1-paskripkin@gmail.com Reported-and-tested-by: syzbot+3bc1dce0cc0052d60fde@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15can: mcba_usb: mcba_usb_start_xmit(): fix double dev_kfree_skb in error pathHangyu Hua1-1/+0
commit 04c9b00ba83594a29813d6b1fb8fdc93a3915174 upstream. There is no need to call dev_kfree_skb() when usb_submit_urb() fails because can_put_echo_skb() deletes original skb and can_free_echo_skb() deletes the cloned skb. Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer") Link: https://lore.kernel.org/all/20220311080208.45047-1-hbh25y@gmail.com Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-15can: ems_usb: ems_usb_start_xmit(): fix double dev_kfree_skb() in error pathHangyu Hua1-1/+0
commit c70222752228a62135cee3409dccefd494a24646 upstream. There is no need to call dev_kfree_skb() when usb_submit_urb() fails beacause can_put_echo_skb() deletes the original skb and can_free_echo_skb() deletes the cloned skb. Link: https://lore.kernel.org/all/20220228083639.38183-1-hbh25y@gmail.com Fixes: 702171adeed3 ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface") Cc: stable@vger.kernel.org Cc: Sebastian Haas <haas@ems-wuensche.com> Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-03-08can: gs_usb: change active_channels's type from atomic_t to u8Vincent Mailhol1-5/+5
commit 035b0fcf02707d3c9c2890dc1484b11aa5335eb1 upstream. The driver uses an atomic_t variable: gs_usb:active_channels to keep track of the number of opened channels in order to only allocate memory for the URBs when this count changes from zero to one. However, the driver does not decrement the counter when an error occurs in gs_can_open(). This issue is fixed by changing the type from atomic_t to u8 and by simplifying the logic accordingly. It is safe to use an u8 here because the network stack big kernel lock (a.k.a. rtnl_mutex) is being hold. For details, please refer to [1]. [1] https://lore.kernel.org/linux-can/CAMZ6Rq+sHpiw34ijPsmp7vbUpDtJwvVtdV7CvRZJsLixjAFfrg@mail.gmail.com/T/#t Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://lore.kernel.org/all/20220214234814.1321599-1-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-16can: gs_usb: gs_can_start_xmit(): zero-initialize hf->{flags,reserved}Brian Silverman1-0/+2
commit 89d58aebe14a365c25ba6645414afdbf4e41cea4 upstream. No information is deliberately sent in hf->flags in host -> device communications, but the open-source candleLight firmware echoes it back, which can result in the GS_CAN_FLAG_OVERFLOW flag being set and generating spurious ERRORFRAMEs. While there also initialize the reserved member with 0. Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://lore.kernel.org/all/20220106002952.25883-1-brian.silverman@bluerivertech.com Link: https://github.com/candle-usb/candleLight_fw/issues/87 Cc: stable@vger.kernel.org Signed-off-by: Brian Silverman <brian.silverman@bluerivertech.com> [mkl: initialize the reserved member, too] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-01-16can: gs_usb: fix use of uninitialized variable, detach device on reception ↵Marc Kleine-Budde1-1/+2
of invalid USB data commit 4a8737ff068724f509d583fef404d349adba80d6 upstream. The received data contains the channel the received data is associated with. If the channel number is bigger than the actual number of channels assume broken or malicious USB device and shut it down. This fixes the error found by clang: | drivers/net/can/usb/gs_usb.c:386:6: error: variable 'dev' is used | uninitialized whenever 'if' condition is true | if (hf->channel >= GS_MAX_INTF) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ | drivers/net/can/usb/gs_usb.c:474:10: note: uninitialized use occurs here | hf, dev->gs_hf_size, gs_usb_receive_bulk_callback, | ^~~ Link: https://lore.kernel.org/all/20211210091158.408326-1-mkl@pengutronix.de Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14can: kvaser_usb: get CAN clock frequency from deviceJimmy Assarsson1-28/+73
commit fb12797ab1fef480ad8a32a30984844444eeb00d upstream. The CAN clock frequency is used when calculating the CAN bittiming parameters. When wrong clock frequency is used, the device may end up with wrong bittiming parameters, depending on user requested bittiming parameters. To avoid this, get the CAN clock frequency from the device. Various existing Kvaser Leaf products use different CAN clocks. Fixes: 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Link: https://lore.kernel.org/all/20211208152122.250852-2-extja@kvaser.com Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-10-27can: peak_usb: pcan_usb_fd_decode_status(): fix back to ERROR_ACTIVE state ↵Stephane Grosjean1-3/+2
notification commit 3d031abc7e7249573148871180c28ecedb5e27df upstream. This corrects the lack of notification of a return to ERROR_ACTIVE state for USB - CANFD devices from PEAK-System. Fixes: 0a25e1f4f185 ("can: peak_usb: add support for PEAK new CANFD USB adapters") Link: https://lore.kernel.org/all/20210929142111.55757-1-s.grosjean@peak-system.com Cc: stable@vger.kernel.org Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-03can: usb: esd_usb2: esd_usb2_rx_event(): fix the interchange of the CAN RX ↵Stefan Mätje1-2/+2
and TX error counters commit 044012b52029204900af9e4230263418427f4ba4 upstream. This patch fixes the interchanged fetch of the CAN RX and TX error counters from the ESD_EV_CAN_ERROR_EXT message. The RX error counter is really in struct rx_msg::data[2] and the TX error counter is in struct rx_msg::data[3]. Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device") Link: https://lore.kernel.org/r/20210825215227.4947-2-stefan.maetje@esd.eu Cc: stable@vger.kernel.org Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-04can: esd_usb2: fix memory leakPavel Skripkin1-1/+15
commit 928150fad41ba16df7fcc9f7f945747d0f56cbb6 upstream. In esd_usb2_setup_rx_urbs() MAX_RX_URBS coherent buffers are allocated and there is nothing, that frees them: 1) In callback function the urb is resubmitted and that's all 2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER is not set (see esd_usb2_setup_rx_urbs) and this flag cannot be used with coherent buffers. So, all allocated buffers should be freed with usb_free_coherent() explicitly. Side note: This code looks like a copy-paste of other can drivers. The same patch was applied to mcba_usb driver and it works nice with real hardware. There is no change in functionality, only clean-up code for coherent buffers. Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device") Link: https://lore.kernel.org/r/b31b096926dcb35998ad0271aac4b51770ca7cc8.1627404470.git.paskripkin@gmail.com Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-04can: ems_usb: fix memory leakPavel Skripkin1-1/+13
commit 9969e3c5f40c166e3396acc36c34f9de502929f6 upstream. In ems_usb_start() MAX_RX_URBS coherent buffers are allocated and there is nothing, that frees them: 1) In callback function the urb is resubmitted and that's all 2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER is not set (see ems_usb_start) and this flag cannot be used with coherent buffers. So, all allocated buffers should be freed with usb_free_coherent() explicitly. Side note: This code looks like a copy-paste of other can drivers. The same patch was applied to mcba_usb driver and it works nice with real hardware. There is no change in functionality, only clean-up code for coherent buffers. Fixes: 702171adeed3 ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface") Link: https://lore.kernel.org/r/59aa9fbc9a8cbf9af2bbd2f61a659c480b415800.1627404470.git.paskripkin@gmail.com Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-04can: usb_8dev: fix memory leakPavel Skripkin1-2/+13
commit 0e865f0c31928d6a313269ef624907eec55287c4 upstream. In usb_8dev_start() MAX_RX_URBS coherent buffers are allocated and there is nothing, that frees them: 1) In callback function the urb is resubmitted and that's all 2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER is not set (see usb_8dev_start) and this flag cannot be used with coherent buffers. So, all allocated buffers should be freed with usb_free_coherent() explicitly. Side note: This code looks like a copy-paste of other can drivers. The same patch was applied to mcba_usb driver and it works nice with real hardware. There is no change in functionality, only clean-up code for coherent buffers. Fixes: 0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices") Link: https://lore.kernel.org/r/d39b458cd425a1cf7f512f340224e6e9563b07bd.1627404470.git.paskripkin@gmail.com Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-04can: mcba_usb_start(): add missing urb->transfer_dma initializationPavel Skripkin1-0/+2
commit fc43fb69a7af92839551f99c1a96a37b77b3ae7a upstream. Yasushi reported, that his Microchip CAN Analyzer stopped working since commit 91c02557174b ("can: mcba_usb: fix memory leak in mcba_usb"). The problem was in missing urb->transfer_dma initialization. In my previous patch to this driver I refactored mcba_usb_start() code to avoid leaking usb coherent buffers. To archive it, I passed local stack variable to usb_alloc_coherent() and then saved it to private array to correctly free all coherent buffers on ->close() call. But I forgot to initialize urb->transfer_dma with variable passed to usb_alloc_coherent(). All of this was causing device to not work, since dma addr 0 is not valid and following log can be found on bug report page, which points exactly to problem described above. | DMAR: [DMA Write] Request device [00:14.0] PASID ffffffff fault addr 0 [fault reason 05] PTE Write access is not set Fixes: 91c02557174b ("can: mcba_usb: fix memory leak in mcba_usb") Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=990850 Link: https://lore.kernel.org/r/20210725103630.23864-1-paskripkin@gmail.com Cc: linux-stable <stable@vger.kernel.org> Reported-by: Yasushi SHOJI <yasushi.shoji@gmail.com> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Tested-by: Yasushi SHOJI <yashi@spacecubics.com> [mkl: fixed typos in commit message - thanks Yasushi SHOJI] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-14net: can: ems_usb: fix use-after-free in ems_usb_disconnect()Pavel Skripkin1-1/+2
commit ab4a0b8fcb9a95c02909b62049811bd2e586aaa4 upstream. In ems_usb_disconnect() dev pointer, which is netdev private data, is used after free_candev() call: | if (dev) { | unregister_netdev(dev->netdev); | free_candev(dev->netdev); | | unlink_all_urbs(dev); | | usb_free_urb(dev->intr_urb); | | kfree(dev->intr_in_buffer); | kfree(dev->tx_msg_buffer); | } Fix it by simply moving free_candev() at the end of the block. Fail log: | BUG: KASAN: use-after-free in ems_usb_disconnect | Read of size 8 at addr ffff88804e041008 by task kworker/1:2/2895 | | CPU: 1 PID: 2895 Comm: kworker/1:2 Not tainted 5.13.0-rc5+ #164 | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a-rebuilt.opensuse.4 | Workqueue: usb_hub_wq hub_event | Call Trace: | dump_stack (lib/dump_stack.c:122) | print_address_description.constprop.0.cold (mm/kasan/report.c:234) | kasan_report.cold (mm/kasan/report.c:420 mm/kasan/report.c:436) | ems_usb_disconnect (drivers/net/can/usb/ems_usb.c:683 drivers/net/can/usb/ems_usb.c:1058) Fixes: 702171adeed3 ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface") Link: https://lore.kernel.org/r/20210617185130.5834-1-paskripkin@gmail.com Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-23can: mcba_usb: fix memory leak in mcba_usbPavel Skripkin1-2/+15
commit 91c02557174be7f72e46ed7311e3bea1939840b0 upstream. Syzbot reported memory leak in SocketCAN driver for Microchip CAN BUS Analyzer Tool. The problem was in unfreed usb_coherent. In mcba_usb_start() 20 coherent buffers are allocated and there is nothing, that frees them: 1) In callback function the urb is resubmitted and that's all 2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER is not set (see mcba_usb_start) and this flag cannot be used with coherent buffers. Fail log: | [ 1354.053291][ T8413] mcba_usb 1-1:0.0 can0: device disconnected | [ 1367.059384][ T8420] kmemleak: 20 new suspected memory leaks (see /sys/kernel/debug/kmem) So, all allocated buffers should be freed with usb_free_coherent() explicitly NOTE: The same pattern for allocating and freeing coherent buffers is used in drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer") Link: https://lore.kernel.org/r/20210609215833.30393-1-paskripkin@gmail.com Cc: linux-stable <stable@vger.kernel.org> Reported-and-tested-by: syzbot+57281c762a3922e14dfe@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-14drivers: net: fix memory leak in peak_usb_create_devPavel Skripkin1-1/+5
commit a0b96b4a62745397aee662670cfc2157bac03f55 upstream. syzbot reported memory leak in peak_usb. The problem was in case of failure after calling ->dev_init()[2] in peak_usb_create_dev()[1]. The data allocated int dev_init() wasn't freed, so simple ->dev_free() call fix this problem. backtrace: [<0000000079d6542a>] kmalloc include/linux/slab.h:552 [inline] [<0000000079d6542a>] kzalloc include/linux/slab.h:682 [inline] [<0000000079d6542a>] pcan_usb_fd_init+0x156/0x210 drivers/net/can/usb/peak_usb/pcan_usb_fd.c:868 [2] [<00000000c09f9057>] peak_usb_create_dev drivers/net/can/usb/peak_usb/pcan_usb_core.c:851 [inline] [1] [<00000000c09f9057>] peak_usb_probe+0x389/0x490 drivers/net/can/usb/peak_usb/pcan_usb_core.c:949 Reported-by: syzbot+91adee8d9ebb9193d22d@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-30can: peak_usb: Revert "can: peak_usb: add forgotten supported devices"Marc Kleine-Budde1-2/+0
commit 5d7047ed6b7214fbabc16d8712a822e256b1aa44 upstream. In commit 6417f03132a6 ("module: remove never implemented MODULE_SUPPORTED_DEVICE") the MODULE_SUPPORTED_DEVICE macro was removed from the kerne entirely. Shortly before this patch was applied mainline the commit 59ec7b89ed3e ("can: peak_usb: add forgotten supported devices") was added to net/master. As this would result in a merge conflict, let's revert this patch. Fixes: 59ec7b89ed3e ("can: peak_usb: add forgotten supported devices") Link: https://lore.kernel.org/r/20210320192649.341832-1-mkl@pengutronix.de Suggested-by: Leon Romanovsky <leon@kernel.org> Cc: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-30can: peak_usb: add forgotten supported devicesStephane Grosjean1-0/+2
[ Upstream commit 59ec7b89ed3e921cd0625a8c83f31a30d485fdf8 ] Since the peak_usb driver also supports the CAN-USB interfaces "PCAN-USB X6" and "PCAN-Chip USB" from PEAK-System GmbH, this patch adds their names to the list of explicitly supported devices. Fixes: ea8b65b596d7 ("can: usb: Add support of PCAN-Chip USB stamp module") Fixes: f00b534ded60 ("can: peak: Add support for PCAN-USB X6 USB interface") Link: https://lore.kernel.org/r/20210309082128.23125-3-s.grosjean@peak-system.com Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-01-27can: peak_usb: fix use after free bugsVincent Mailhol1-4/+4
[ Upstream commit 50aca891d7a554db0901b245167cd653d73aaa71 ] After calling peak_usb_netif_rx_ni(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is accessed after the peak_usb_netif_rx_ni(). Reordering the lines solves the issue. Fixes: 0a25e1f4f185 ("can: peak_usb: add support for PEAK new CANFD USB adapters") Link: https://lore.kernel.org/r/20210120114137.200019-4-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-02can: gs_usb: fix endianess problem with candleLight firmwareMarc Kleine-Budde1-61/+70
[ Upstream commit 4ba1cb39fce4464151517a37ce0ac0a1a3f580d6 ] The firmware on the original USB2CAN by Geschwister Schneider Technologie Entwicklungs- und Vertriebs UG exchanges all data between the host and the device in host byte order. This is done with the struct gs_host_config::byte_order member, which is sent first to indicate the desired byte order. The widely used open source firmware candleLight doesn't support this feature and exchanges the data in little endian byte order. This breaks if a device with candleLight firmware is used on big endianess systems. To fix this problem, all u32 (but not the struct gs_host_frame::echo_id, which is a transparent cookie) are converted to __le32. Cc: Maximilian Schneider <max@schneidersoft.net> Cc: Hubert Denkmair <hubert@denkmair.de> Reported-by: Michael Rausch <mr@netadair.de> Link: https://lore.kernel.org/r/b58aace7-61f3-6df7-c6df-69fee2c66906@netadair.de Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Link: https://lore.kernel.org/r/20201120103818.3386964-1-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-24can: kvaser_usb: kvaser_usb_hydra: Fix KCAN bittiming limitsJimmy Assarsson1-1/+1
[ Upstream commit d003868d7f8579838ed58b6429af91844039b6f8 ] Use correct bittiming limits for the KCAN CAN controller. Fixes: aec5fb2268b7 ("can: kvaser_usb: Add support for Kvaser USB hydra family") Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/r/20201115163027.16851-2-jimmyassarsson@gmail.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-03 08:45:55 +0300