summaryrefslogtreecommitdiff
path: root/drivers/net/can/sun4i_can.c
AgeCommit message (Collapse)AuthorFilesLines
2022-05-19can: can-dev: remove obsolete CAN LED supportOliver Hartkopp1-7/+0
Since commit 30f3b42147ba6f ("can: mark led trigger as broken") the CAN specific LED support was disabled and marked as BROKEN. As the common LED support with CONFIG_LEDS_TRIGGER_NETDEV should do this work now the code can be removed as preparation for a CAN netdevice Kconfig rework. Link: https://lore.kernel.org/all/20220518154527.29046-1-socketcan@hartkopp.net Suggested-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> [mkl: remove led.h from MAINTAINERS] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-05can: do not increase tx_bytes statistics for RTR framesVincent Mailhol1-4/+1
The actual payload length of the CAN Remote Transmission Request (RTR) frames is always 0, i.e. no payload is transmitted on the wire. However, those RTR frames still use the DLC to indicate the length of the requested frame. As such, net_device_stats::tx_bytes should not be increased when sending RTR frames. The function can_get_echo_skb() already returns the correct length, even for RTR frames (c.f. [1]). However, for historical reasons, the drivers do not use can_get_echo_skb()'s return value and instead, most of them store a temporary length (or dlc) in some local structure or array. Using the return value of can_get_echo_skb() solves the issue. After doing this, such length/dlc fields become unused and so this patch does the adequate cleaning when needed. This patch fixes all the CAN drivers. Finally, can_get_echo_skb() is decorated with the __must_check attribute in order to force future drivers to correctly use its return value (else the compiler would emit a warning). [1] commit ed3320cec279 ("can: dev: __can_get_echo_skb(): fix real payload length return value for RTR frames") Link: https://lore.kernel.org/all/20211207121531.42941-6-mailhol.vincent@wanadoo.fr Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: Yasushi SHOJI <yashi@spacecubics.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Stephane Grosjean <s.grosjean@peak-system.com> Cc: Andreas Larsson <andreas@gaisler.com> Tested-by: Jimmy Assarsson <extja@kvaser.com> # kvaser Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Acked-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2 Tested-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2 [mkl: add conversion for grcan] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-05can: do not increase rx_bytes statistics for RTR framesVincent Mailhol1-4/+6
The actual payload length of the CAN Remote Transmission Request (RTR) frames is always 0, i.e. no payload is transmitted on the wire. However, those RTR frames still use the DLC to indicate the length of the requested frame. As such, net_device_stats::rx_bytes should not be increased for the RTR frames. This patch fixes all the CAN drivers. Link: https://lore.kernel.org/all/20211207121531.42941-5-mailhol.vincent@wanadoo.fr Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Chandrasekar Ramakrishnan <rcsekar@samsung.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: Yasushi SHOJI <yashi@spacecubics.com> Cc: Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com> Cc: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Stephane Grosjean <s.grosjean@peak-system.com> Tested-by: Jimmy Assarsson <extja@kvaser.com> # kvaser Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Acked-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2 Tested-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-05can: do not increase rx statistics when generating a CAN rx error message frameVincent Mailhol1-5/+2
The CAN error message frames (i.e. error skb) are an interface specific to socket CAN. The payload of the CAN error message frames does not correspond to any actual data sent on the wire. Only an error flag and a delimiter are transmitted when an error occurs (c.f. ISO 11898-1 section 10.4.4.2 "Error flag"). For this reason, it makes no sense to increment the rx_packets and rx_bytes fields of struct net_device_stats because no actual payload were transmitted on the wire. This patch fixes all the CAN drivers. Link: https://lore.kernel.org/all/20211207121531.42941-2-mailhol.vincent@wanadoo.fr CC: Marc Kleine-Budde <mkl@pengutronix.de> CC: Nicolas Ferre <nicolas.ferre@microchip.com> CC: Alexandre Belloni <alexandre.belloni@bootlin.com> CC: Ludovic Desroches <ludovic.desroches@microchip.com> CC: Chandrasekar Ramakrishnan <rcsekar@samsung.com> CC: Maxime Ripard <mripard@kernel.org> CC: Chen-Yu Tsai <wens@csie.org> CC: Jernej Skrabec <jernej.skrabec@gmail.com> CC: Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com> CC: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com> CC: Michal Simek <michal.simek@xilinx.com> CC: Stephane Grosjean <s.grosjean@peak-system.com> Tested-by: Jimmy Assarsson <extja@kvaser.com> # kvaser Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Acked-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2 Tested-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-12-08can: sun4i_can: add support for R40 CAN controllerEvgeny Boger1-2/+60
Allwinner R40 (also known as A40i, T3, V40) has a CAN controller. The controller is the same as in earlier A10 and A20 SoCs, but needs reset line to be deasserted before use. This patch adds a new compatible for R40 CAN controller. Depending on the compatible, reset line can be requested from DT. Link: https://lore.kernel.org/all/20211122104616.537156-3-boger@wirenboard.com Signed-off-by: Evgeny Boger <boger@wirenboard.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-14can: dev: can_get_echo_skb(): extend to return can frame lengthMarc Kleine-Budde1-1/+1
In order to implement byte queue limits (bql) in CAN drivers, the length of the CAN frame needs to be passed into the networking stack after queueing and after transmission completion. To avoid to calculate this length twice, extend can_get_echo_skb() to return that value. Convert all users of this function, too. Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/r/20210111141930.693847-14-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-14can: dev: can_put_echo_skb(): extend to handle frame_lenVincent Mailhol1-1/+1
Add a frame_len argument to can_put_echo_skb() which is used to save length of the CAN frame into field frame_len of struct can_skb_priv so that it can be later used after transmission completion. Convert all users of this function, too. Drivers which implement BQL call can_put_echo_skb() with the output of can_skb_get_frame_len(skb) and drivers which do not simply pass zero as an input (in the same way that NULL would be given to can_get_echo_skb()). This way, we have a nice symmetry between the two echo functions. Link: https://lore.kernel.org/r/20210111061335.39983-1-mailhol.vincent@wanadoo.fr Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/r/20210111141930.693847-13-mkl@pengutronix.de Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
2020-12-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+0
Conflicts: drivers/net/ethernet/ibm/ibmvnic.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-30can: sun4i_can: sun4i_can_err(): don't count arbitration lose as an errorJeroen Hofstee1-1/+0
Losing arbitration is normal in a CAN-bus network, it means that a higher priority frame is being send and the pending message will be retried later. Hence most driver only increment arbitration_lost, but the sun4i driver also incremeants tx_error, causing errors to be reported on a normal functioning CAN-bus. So stop counting them as errors. Fixes: 0738eff14d81 ("can: Allwinner A10/A20 CAN Controller support - Kernel module") Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com> Link: https://lore.kernel.org/r/20201127095941.21609-1-jhofstee@victronenergy.com [mkl: split into two seperate patches] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-20can: replace can_dlc as variable/element for payload lengthOliver Hartkopp1-5/+5
The naming of can_dlc as element of struct can_frame and also as variable name is misleading as it claims to be a 'data length CODE' but in reality it always was a plain data length. With the indroduction of a new 'len' element in struct can_frame we can now remove can_dlc as name and make clear which of the former uses was a plain length (-> 'len') or a data length code (-> 'dlc') value. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20201120100444.3199-1-socketcan@hartkopp.net [mkl: gs_usb: keep struct gs_host_frame::can_dlc as is] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-11-20can: rename get_can_dlc() macro with can_cc_dlc2len()Oliver Hartkopp1-1/+1
The get_can_dlc() macro is used to ensure the payload length information of the Classical CAN frame to be max 8 bytes (the CAN_MAX_DLEN). Rename the macro and use the correct constant in preparation of the len/dlc cleanup for Classical CAN frames. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20201110101852.1973-3-socketcan@hartkopp.net Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2020-05-24net: Fix return value about devm_platform_ioremap_resource()Tiezhu Yang1-1/+1
When call function devm_platform_ioremap_resource(), we should use IS_ERR() to check the return value and return PTR_ERR() if failed. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11can: sun4i: use devm_platform_ioremap_resource() to simplify codeYueHaibing1-3/+1
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-07-31net: Remove dev_err() usage after platform_get_irq()Stephen Boyd1-1/+0
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: "David S. Miller" <davem@davemloft.net> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Felix Fietkau <nbd@nbd.name> Cc: Lorenzo Bianconi <lorenzo@kernel.org> Cc: netdev@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-27can: sun4i: fix sun4ican_start_xmit()'s return typeLuc Van Oostenryck1-1/+1
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, but the implementation in this driver returns an 'int'. Fix this by returning 'netdev_tx_t' in this driver too. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-11-10can: sun4i: handle overrun in RX FIFOGerhard Bertelsmann1-2/+10
SUN4Is CAN IP has a 64 byte deep FIFO buffer. If the buffer is not drained fast enough (overrun) it's getting mangled. Already received frames are dropped - the data can't be restored. Signed-off-by: Gerhard Bertelsmann <info@gerhard-bertelsmann.de> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-10-24can: sun4i: fix loopback modeGerhard Bertelsmann1-2/+1
Fix loopback mode by setting the right flag and remove presume mode. Signed-off-by: Gerhard Bertelsmann <info@gerhard-bertelsmann.de> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2015-11-23can: remove obsolete assignment for CAN protocol error typeOliver Hartkopp1-1/+0
The assignment 'cf->data[2] |= CAN_ERR_PROT_UNSPEC' used at CAN error message creation time is obsolete as CAN_ERR_PROT_UNSPEC is zero and cf->data[2] is initialized with zero in alloc_can_err_skb() anyway. So we could either assign 'cf->data[2] = CAN_ERR_PROT_UNSPEC' correctly or we can remove the obsolete OR operation entirely. Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2015-10-13can: sun4i: fix MODULE_DESCRIPTIONGerhard Bertelsmann1-1/+1
This patch change description of the module. Signed-off-by: Gerhard Bertelsmann <info@gerhard-bertelsmann.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2015-10-13can: sun4i: fix arbitration lost error reportingGerhard Bertelsmann1-1/+1
This patch fixes a bug in arbitration error reporting Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Gerhard Bertelsmann <info@gerhard-bertelsmann.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2015-09-17can: Allwinner A10/A20 CAN Controller support - Kernel moduleGerhard Bertelsmann1-0/+857
Kernel module for Allwinner A10/A20 CAN controller. Signed-off-by: Gerhard Bertelsmann <info@gerhard-bertelsmann.de> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-09 06:28:05 +0300