summaryrefslogtreecommitdiff
path: root/drivers/net/bonding
AgeCommit message (Collapse)AuthorFilesLines
2020-03-18bonding/alb: make sure arp header is pulled before accessing itEric Dumazet1-10/+10
commit b7469e83d2add567e4e0b063963db185f3167cea upstream. Similar to commit 38f88c454042 ("bonding/alb: properly access headers in bond_alb_xmit()"), we need to make sure arp header was pulled in skb->head before blindly accessing it in rlb_arp_xmit(). Remove arp_pkt() private helper, since it is more readable/obvious to have the following construct back to back : if (!pskb_network_may_pull(skb, sizeof(*arp))) return NULL; arp = (struct arp_pkt *)skb_network_header(skb); syzbot reported : BUG: KMSAN: uninit-value in bond_slave_has_mac_rx include/net/bonding.h:704 [inline] BUG: KMSAN: uninit-value in rlb_arp_xmit drivers/net/bonding/bond_alb.c:662 [inline] BUG: KMSAN: uninit-value in bond_alb_xmit+0x575/0x25e0 drivers/net/bonding/bond_alb.c:1477 CPU: 0 PID: 12743 Comm: syz-executor.4 Not tainted 5.6.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 bond_slave_has_mac_rx include/net/bonding.h:704 [inline] rlb_arp_xmit drivers/net/bonding/bond_alb.c:662 [inline] bond_alb_xmit+0x575/0x25e0 drivers/net/bonding/bond_alb.c:1477 __bond_start_xmit drivers/net/bonding/bond_main.c:4257 [inline] bond_start_xmit+0x85d/0x2f70 drivers/net/bonding/bond_main.c:4282 __netdev_start_xmit include/linux/netdevice.h:4524 [inline] netdev_start_xmit include/linux/netdevice.h:4538 [inline] xmit_one net/core/dev.c:3470 [inline] dev_hard_start_xmit+0x531/0xab0 net/core/dev.c:3486 __dev_queue_xmit+0x37de/0x4220 net/core/dev.c:4063 dev_queue_xmit+0x4b/0x60 net/core/dev.c:4096 packet_snd net/packet/af_packet.c:2967 [inline] packet_sendmsg+0x8347/0x93b0 net/packet/af_packet.c:2992 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg net/socket.c:672 [inline] __sys_sendto+0xc1b/0xc50 net/socket.c:1998 __do_sys_sendto net/socket.c:2010 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:2006 __x64_sys_sendto+0x6e/0x90 net/socket.c:2006 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45c479 Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fc77ffbbc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007fc77ffbc6d4 RCX: 000000000045c479 RDX: 000000000000000e RSI: 00000000200004c0 RDI: 0000000000000003 RBP: 000000000076bf20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 0000000000000a04 R14: 00000000004cc7b0 R15: 000000000076bf2c Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline] kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:82 slab_alloc_node mm/slub.c:2793 [inline] __kmalloc_node_track_caller+0xb40/0x1200 mm/slub.c:4401 __kmalloc_reserve net/core/skbuff.c:142 [inline] __alloc_skb+0x2fd/0xac0 net/core/skbuff.c:210 alloc_skb include/linux/skbuff.h:1051 [inline] alloc_skb_with_frags+0x18c/0xa70 net/core/skbuff.c:5766 sock_alloc_send_pskb+0xada/0xc60 net/core/sock.c:2242 packet_alloc_skb net/packet/af_packet.c:2815 [inline] packet_snd net/packet/af_packet.c:2910 [inline] packet_sendmsg+0x66a0/0x93b0 net/packet/af_packet.c:2992 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg net/socket.c:672 [inline] __sys_sendto+0xc1b/0xc50 net/socket.c:1998 __do_sys_sendto net/socket.c:2010 [inline] __se_sys_sendto+0x107/0x130 net/socket.c:2006 __x64_sys_sendto+0x6e/0x90 net/socket.c:2006 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-11bonding/alb: properly access headers in bond_alb_xmit()Eric Dumazet1-12/+32
[ Upstream commit 38f88c45404293bbc027b956def6c10cbd45c616 ] syzbot managed to send an IPX packet through bond_alb_xmit() and af_packet and triggered a use-after-free. First, bond_alb_xmit() was using ipx_hdr() helper to reach the IPX header, but ipx_hdr() was using the transport offset instead of the network offset. In the particular syzbot report transport offset was 0xFFFF This patch removes ipx_hdr() since it was only (mis)used from bonding. Then we need to make sure IPv4/IPv6/IPX headers are pulled in skb->head before dereferencing anything. BUG: KASAN: use-after-free in bond_alb_xmit+0x153a/0x1590 drivers/net/bonding/bond_alb.c:1452 Read of size 2 at addr ffff8801ce56dfff by task syz-executor.2/18108 (if (ipx_hdr(skb)->ipx_checksum != IPX_NO_CHECKSUM) ...) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: [<ffffffff8441fc42>] __dump_stack lib/dump_stack.c:17 [inline] [<ffffffff8441fc42>] dump_stack+0x14d/0x20b lib/dump_stack.c:53 [<ffffffff81a7dec4>] print_address_description+0x6f/0x20b mm/kasan/report.c:282 [<ffffffff81a7e0ec>] kasan_report_error mm/kasan/report.c:380 [inline] [<ffffffff81a7e0ec>] kasan_report mm/kasan/report.c:438 [inline] [<ffffffff81a7e0ec>] kasan_report.cold+0x8c/0x2a0 mm/kasan/report.c:422 [<ffffffff81a7dc4f>] __asan_report_load_n_noabort+0xf/0x20 mm/kasan/report.c:469 [<ffffffff82c8c00a>] bond_alb_xmit+0x153a/0x1590 drivers/net/bonding/bond_alb.c:1452 [<ffffffff82c60c74>] __bond_start_xmit drivers/net/bonding/bond_main.c:4199 [inline] [<ffffffff82c60c74>] bond_start_xmit+0x4f4/0x1570 drivers/net/bonding/bond_main.c:4224 [<ffffffff83baa558>] __netdev_start_xmit include/linux/netdevice.h:4525 [inline] [<ffffffff83baa558>] netdev_start_xmit include/linux/netdevice.h:4539 [inline] [<ffffffff83baa558>] xmit_one net/core/dev.c:3611 [inline] [<ffffffff83baa558>] dev_hard_start_xmit+0x168/0x910 net/core/dev.c:3627 [<ffffffff83bacf35>] __dev_queue_xmit+0x1f55/0x33b0 net/core/dev.c:4238 [<ffffffff83bae3a8>] dev_queue_xmit+0x18/0x20 net/core/dev.c:4278 [<ffffffff84339189>] packet_snd net/packet/af_packet.c:3226 [inline] [<ffffffff84339189>] packet_sendmsg+0x4919/0x70b0 net/packet/af_packet.c:3252 [<ffffffff83b1ac0c>] sock_sendmsg_nosec net/socket.c:673 [inline] [<ffffffff83b1ac0c>] sock_sendmsg+0x12c/0x160 net/socket.c:684 [<ffffffff83b1f5a2>] __sys_sendto+0x262/0x380 net/socket.c:1996 [<ffffffff83b1f700>] SYSC_sendto net/socket.c:2008 [inline] [<ffffffff83b1f700>] SyS_sendto+0x40/0x60 net/socket.c:2004 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04bonding: fix active-backup transition after link failureMahesh Bandewar1-3/+0
[ Upstream commit 5d485ed88d48f8101a2067348e267c0aaf4ed486 ] After the recent fix in commit 1899bb325149 ("bonding: fix state transition issue in link monitoring"), the active-backup mode with miimon initially come-up fine but after a link-failure, both members transition into backup state. Following steps to reproduce the scenario (eth1 and eth2 are the slaves of the bond): ip link set eth1 up ip link set eth2 down sleep 1 ip link set eth2 up ip link set eth1 down cat /sys/class/net/eth1/bonding_slave/state cat /sys/class/net/eth2/bonding_slave/state Fixes: 1899bb325149 ("bonding: fix state transition issue in link monitoring") CC: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Mahesh Bandewar <maheshb@google.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-12bonding: fix unexpected IFF_BONDING bit unsetTaehee Yoo1-2/+4
[ Upstream commit 65de65d9033750d2cf1b336c9d6e9da3a8b5cc6e ] The IFF_BONDING means bonding master or bonding slave device. ->ndo_add_slave() sets IFF_BONDING flag and ->ndo_del_slave() unsets IFF_BONDING flag. bond0<--bond1 Both bond0 and bond1 are bonding device and these should keep having IFF_BONDING flag until they are removed. But bond1 would lose IFF_BONDING at ->ndo_del_slave() because that routine do not check whether the slave device is the bonding type or not. This patch adds the interface type check routine before removing IFF_BONDING flag. Test commands: ip link add bond0 type bond ip link add bond1 type bond ip link set bond1 master bond0 ip link set bond1 nomaster ip link del bond1 type bond ip link add bond1 type bond Splat looks like: [ 226.665555] proc_dir_entry 'bonding/bond1' already registered [ 226.666440] WARNING: CPU: 0 PID: 737 at fs/proc/generic.c:361 proc_register+0x2a9/0x3e0 [ 226.667571] Modules linked in: bonding af_packet sch_fq_codel ip_tables x_tables unix [ 226.668662] CPU: 0 PID: 737 Comm: ip Not tainted 5.4.0-rc3+ #96 [ 226.669508] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 226.670652] RIP: 0010:proc_register+0x2a9/0x3e0 [ 226.671612] Code: 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 39 01 00 00 48 8b 04 24 48 89 ea 48 c7 c7 a0 0b 14 9f 48 8b b0 e 0 00 00 00 e8 07 e7 88 ff <0f> 0b 48 c7 c7 40 2d a5 9f e8 59 d6 23 01 48 8b 4c 24 10 48 b8 00 [ 226.675007] RSP: 0018:ffff888050e17078 EFLAGS: 00010282 [ 226.675761] RAX: dffffc0000000008 RBX: ffff88805fdd0f10 RCX: ffffffff9dd344e2 [ 226.676757] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88806c9f6b8c [ 226.677751] RBP: ffff8880507160f3 R08: ffffed100d940019 R09: ffffed100d940019 [ 226.678761] R10: 0000000000000001 R11: ffffed100d940018 R12: ffff888050716008 [ 226.679757] R13: ffff8880507160f2 R14: dffffc0000000000 R15: ffffed100a0e2c1e [ 226.680758] FS: 00007fdc217cc0c0(0000) GS:ffff88806c800000(0000) knlGS:0000000000000000 [ 226.681886] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 226.682719] CR2: 00007f49313424d0 CR3: 0000000050e46001 CR4: 00000000000606f0 [ 226.683727] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 226.684725] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 226.685681] Call Trace: [ 226.687089] proc_create_seq_private+0xb3/0xf0 [ 226.687778] bond_create_proc_entry+0x1b3/0x3f0 [bonding] [ 226.691458] bond_netdev_event+0x433/0x970 [bonding] [ 226.692139] ? __module_text_address+0x13/0x140 [ 226.692779] notifier_call_chain+0x90/0x160 [ 226.693401] register_netdevice+0x9b3/0xd80 [ 226.694010] ? alloc_netdev_mqs+0x854/0xc10 [ 226.694629] ? netdev_change_features+0xa0/0xa0 [ 226.695278] ? rtnl_create_link+0x2ed/0xad0 [ 226.695849] bond_newlink+0x2a/0x60 [bonding] [ 226.696422] __rtnl_newlink+0xb9f/0x11b0 [ 226.696968] ? rtnl_link_unregister+0x220/0x220 [ ... ] Fixes: 0b680e753724 ("[PATCH] bonding: Add priv_flag to avoid event mishandling") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-12bonding: fix state transition issue in link monitoringJay Vosburgh1-21/+20
[ Upstream commit 1899bb325149e481de31a4f32b59ea6f24e176ea ] Since de77ecd4ef02 ("bonding: improve link-status update in mii-monitoring"), the bonding driver has utilized two separate variables to indicate the next link state a particular slave should transition to. Each is used to communicate to a different portion of the link state change commit logic; one to the bond_miimon_commit function itself, and another to the state transition logic. Unfortunately, the two variables can become unsynchronized, resulting in incorrect link state transitions within bonding. This can cause slaves to become stuck in an incorrect link state until a subsequent carrier state transition. The issue occurs when a special case in bond_slave_netdev_event sets slave->link directly to BOND_LINK_FAIL. On the next pass through bond_miimon_inspect after the slave goes carrier up, the BOND_LINK_FAIL case will set the proposed next state (link_new_state) to BOND_LINK_UP, but the new_link to BOND_LINK_DOWN. The setting of the final link state from new_link comes after that from link_new_state, and so the slave will end up incorrectly in _DOWN state. Resolve this by combining the two variables into one. Reported-by: Aleksei Zakharov <zakharov.a.g@yandex.ru> Reported-by: Sha Zhang <zhangsha.zhang@huawei.com> Cc: Mahesh Bandewar <maheshb@google.com> Fixes: de77ecd4ef02 ("bonding: improve link-status update in mii-monitoring") Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-06bonding: fix potential NULL deref in bond_update_slave_arrEric Dumazet1-1/+1
commit a7137534b597b7c303203e6bc3ed87e87a273bb8 upstream. syzbot got a NULL dereference in bond_update_slave_arr() [1], happening after a failure to allocate bond->slave_arr A workqueue (bond_slave_arr_handler) is supposed to retry the allocation later, but if the slave is removed before the workqueue had a chance to complete, bond->slave_arr can still be NULL. [1] Failed to build slave-array. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI Modules linked in: Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:bond_update_slave_arr.cold+0xc6/0x198 drivers/net/bonding/bond_main.c:4039 RSP: 0018:ffff88018fe33678 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffc9000290b000 RDX: 0000000000000000 RSI: ffffffff82b63037 RDI: ffff88019745ea20 RBP: ffff88018fe33760 R08: ffff880170754280 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff88019745ea00 R14: 0000000000000000 R15: ffff88018fe338b0 FS: 00007febd837d700(0000) GS:ffff8801dad00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004540a0 CR3: 00000001c242e005 CR4: 00000000001626f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: [<ffffffff82b5b45e>] __bond_release_one+0x43e/0x500 drivers/net/bonding/bond_main.c:1923 [<ffffffff82b5b966>] bond_release drivers/net/bonding/bond_main.c:2039 [inline] [<ffffffff82b5b966>] bond_do_ioctl+0x416/0x870 drivers/net/bonding/bond_main.c:3562 [<ffffffff83ae25f4>] dev_ifsioc+0x6f4/0x940 net/core/dev_ioctl.c:328 [<ffffffff83ae2e58>] dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:495 [<ffffffff83995ffd>] sock_do_ioctl+0x1bd/0x300 net/socket.c:1088 [<ffffffff83996a80>] sock_ioctl+0x300/0x5d0 net/socket.c:1196 [<ffffffff81b124db>] vfs_ioctl fs/ioctl.c:47 [inline] [<ffffffff81b124db>] file_ioctl fs/ioctl.c:501 [inline] [<ffffffff81b124db>] do_vfs_ioctl+0xacb/0x1300 fs/ioctl.c:688 [<ffffffff81b12dc6>] SYSC_ioctl fs/ioctl.c:705 [inline] [<ffffffff81b12dc6>] SyS_ioctl+0xb6/0xe0 fs/ioctl.c:696 [<ffffffff8101ccc8>] do_syscall_64+0x528/0x770 arch/x86/entry/common.c:305 [<ffffffff84400091>] entry_SYSCALL_64_after_hwframe+0x42/0xb7 Fixes: ee6377147409 ("bonding: Simplify the xmit function for modes that use xmit_hash") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-29bonding: Force slave speed check after link state recovery for 802.3adThomas Falcon1-0/+9
[ Upstream commit 12185dfe44360f814ac4ead9d22ad2af7511b2e9 ] The following scenario was encountered during testing of logical partition mobility on pseries partitions with bonded ibmvnic adapters in LACP mode. 1. Driver receives a signal that the device has been swapped, and it needs to reset to initialize the new device. 2. Driver reports loss of carrier and begins initialization. 3. Bonding driver receives NETDEV_CHANGE notifier and checks the slave's current speed and duplex settings. Because these are unknown at the time, the bond sets its link state to BOND_LINK_FAIL and handles the speed update, clearing AD_PORT_LACP_ENABLE. 4. Driver finishes recovery and reports that the carrier is on. 5. Bond receives a new notification and checks the speed again. The speeds are valid but miimon has not altered the link state yet. AD_PORT_LACP_ENABLE remains off. Because the slave's link state is still BOND_LINK_FAIL, no further port checks are made when it recovers. Though the slave devices are operational and have valid speed and duplex settings, the bond will not send LACPDU's. The simplest fix I can see is to force another speed check in bond_miimon_commit. This way the bond will update AD_PORT_LACP_ENABLE if needed when transitioning from BOND_LINK_FAIL to BOND_LINK_UP. CC: Jarod Wilson <jarod@redhat.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-25bonding: Add vlan tx offload to hw_enc_featuresYueHaibing1-0/+2
[ Upstream commit d595b03de2cb0bdf9bcdf35ff27840cc3a37158f ] As commit 30d8177e8ac7 ("bonding: Always enable vlan tx offload") said, we should always enable bonding's vlan tx offload, pass the vlan packets to the slave devices with vlan tci, let them to handle vlan implementation. Now if encapsulation protocols like VXLAN is used, skb->encapsulation may be set, then the packet is passed to vlan device which based on bonding device. However in netif_skb_features(), the check of hw_enc_features: if (skb->encapsulation) features &= dev->hw_enc_features; clears NETIF_F_HW_VLAN_CTAG_TX/NETIF_F_HW_VLAN_STAG_TX. This results in same issue in commit 30d8177e8ac7 like this: vlan_dev_hard_start_xmit -->dev_queue_xmit -->validate_xmit_skb -->netif_skb_features //NETIF_F_HW_VLAN_CTAG_TX is cleared -->validate_xmit_vlan -->__vlan_hwaccel_push_inside //skb->tci is cleared ... --> bond_start_xmit --> bond_xmit_hash //BOND_XMIT_POLICY_ENCAP34 --> __skb_flow_dissect // nhoff point to IP header --> case htons(ETH_P_8021Q) // skb_vlan_tag_present is false, so vlan = __skb_header_pointer(skb, nhoff, sizeof(_vlan), //vlan point to ip header wrongly Fixes: b2a103e6d0af ("bonding: convert to ndo_fix_features") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26bonding: validate ip header before check IPPROTO_IGMPCong Wang1-14/+23
[ Upstream commit 9d1bc24b52fb8c5d859f9a47084bf1179470e04c ] bond_xmit_roundrobin() checks for IGMP packets but it parses the IP header even before checking skb->protocol. We should validate the IP header with pskb_may_pull() before using iph->protocol. Reported-and-tested-by: syzbot+e5be16aa39ad6e755391@syzkaller.appspotmail.com Fixes: a2fd940f4cff ("bonding: fix broken multicast with round-robin mode") Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-03bonding: Always enable vlan tx offloadYueHaibing1-1/+1
[ Upstream commit 30d8177e8ac776d89d387fad547af6a0f599210e ] We build vlan on top of bonding interface, which vlan offload is off, bond mode is 802.3ad (LACP) and xmit_hash_policy is BOND_XMIT_POLICY_ENCAP34. Because vlan tx offload is off, vlan tci is cleared and skb push the vlan header in validate_xmit_vlan() while sending from vlan devices. Then in bond_xmit_hash, __skb_flow_dissect() fails to get information from protocol headers encapsulated within vlan, because 'nhoff' is points to IP header, so bond hashing is based on layer 2 info, which fails to distribute packets across slaves. This patch always enable bonding's vlan tx offload, pass the vlan packets to the slave devices with vlan tci, let them to handle vlan implementation. Fixes: 278339a42a1b ("bonding: propogate vlan_features to bonding master") Suggested-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-04bonding/802.3ad: fix slave link initialization transition statesJarod Wilson1-5/+10
[ Upstream commit 334031219a84b9994594015aab85ed7754c80176 ] Once in a while, with just the right timing, 802.3ad slaves will fail to properly initialize, winding up in a weird state, with a partner system mac address of 00:00:00:00:00:00. This started happening after a fix to properly track link_failure_count tracking, where an 802.3ad slave that reported itself as link up in the miimon code, but wasn't able to get a valid speed/duplex, started getting set to BOND_LINK_FAIL instead of BOND_LINK_DOWN. That was the proper thing to do for the general "my link went down" case, but has created a link initialization race that can put the interface in this odd state. The simple fix is to instead set the slave link to BOND_LINK_DOWN again, if the link has never been up (last_link_up == 0), so the link state doesn't bounce from BOND_LINK_DOWN to BOND_LINK_FAIL -- it hasn't failed in this case, it simply hasn't been up yet, and this prevents the unnecessary state change from DOWN to FAIL and getting stuck in an init failure w/o a partner mac. Fixes: ea53abfab960 ("bonding/802.3ad: fix link_failure_count tracking") CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: "David S. Miller" <davem@davemloft.net> CC: netdev@vger.kernel.org Tested-by: Heesoon Kim <Heesoon.Kim@stratus.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-16bonding: fix arp_validate toggling in active-backup modeJarod Wilson1-7/+0
[ Upstream commit a9b8a2b39ce65df45687cf9ef648885c2a99fe75 ] There's currently a problem with toggling arp_validate on and off with an active-backup bond. At the moment, you can start up a bond, like so: modprobe bonding mode=1 arp_interval=100 arp_validate=0 arp_ip_targets=192.168.1.1 ip link set bond0 down echo "ens4f0" > /sys/class/net/bond0/bonding/slaves echo "ens4f1" > /sys/class/net/bond0/bonding/slaves ip link set bond0 up ip addr add 192.168.1.2/24 dev bond0 Pings to 192.168.1.1 work just fine. Now turn on arp_validate: echo 1 > /sys/class/net/bond0/bonding/arp_validate Pings to 192.168.1.1 continue to work just fine. Now when you go to turn arp_validate off again, the link falls flat on it's face: echo 0 > /sys/class/net/bond0/bonding/arp_validate dmesg ... [133191.911987] bond0: Setting arp_validate to none (0) [133194.257793] bond0: bond_should_notify_peers: slave ens4f0 [133194.258031] bond0: link status definitely down for interface ens4f0, disabling it [133194.259000] bond0: making interface ens4f1 the new active one [133197.330130] bond0: link status definitely down for interface ens4f1, disabling it [133197.331191] bond0: now running without any active interface! The problem lies in bond_options.c, where passing in arp_validate=0 results in bond->recv_probe getting set to NULL. This flies directly in the face of commit 3fe68df97c7f, which says we need to set recv_probe = bond_arp_recv, even if we're not using arp_validate. Said commit fixed this in bond_option_arp_interval_set, but missed that we can get to that same state in bond_option_arp_validate_set as well. One solution would be to universally set recv_probe = bond_arp_recv here as well, but I don't think bond_option_arp_validate_set has any business touching recv_probe at all, and that should be left to the arp_interval code, so we can just make things much tidier here. Fixes: 3fe68df97c7f ("bonding: always set recv_probe to bond_arp_rcv in arp monitor") CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: "David S. Miller" <davem@davemloft.net> CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-08bonding: show full hw address in sysfs for slave entriesKonstantin Khorenko1-1/+3
[ Upstream commit 18bebc6dd3281955240062655a4df35eef2c46b3 ] Bond expects ethernet hwaddr for its slave, but it can be longer than 6 bytes - infiniband interface for example. # cat /sys/devices/<skipped>/net/ib0/address 80:00:02:08:fe:80:00:00:00:00:00:00:7c:fe:90:03:00:be:5d:e1 # cat /sys/devices/<skipped>/net/ib0/bonding_slave/perm_hwaddr 80:00:02:08:fe:80 So print full hwaddr in sysfs "bonding_slave/perm_hwaddr" as well. Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-27bonding: fix event handling for stacked bondsSabrina Dubroca1-1/+5
[ Upstream commit 92480b3977fd3884649d404cbbaf839b70035699 ] When a bond is enslaved to another bond, bond_netdev_event() only handles the event as if the bond is a master, and skips treating the bond as a slave. This leads to a refcount leak on the slave, since we don't remove the adjacency to its master and the master holds a reference on the slave. Reproducer: ip link add bondL type bond ip link add bondU type bond ip link set bondL master bondU ip link del bondL No "Fixes:" tag, this code is older than git history. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-19bonding: fix PACKET_ORIGDEV regressionMichal Soltys1-21/+14
[ Upstream commit 3c963a3306eada999be5ebf4f293dfa3d3945487 ] This patch fixes a subtle PACKET_ORIGDEV regression which was a side effect of fixes introduced by: 6a9e461f6fe4 bonding: pass link-local packets to bonding master also. ... to: b89f04c61efe bonding: deliver link-local packets with skb->dev set to link that packets arrived on While 6a9e461f6fe4 restored pre-b89f04c61efe presence of link-local packets on bonding masters (which is required e.g. by linux bridges participating in spanning tree or needed for lab-like setups created with group_fwd_mask) it also caused the originating device information to be lost due to cloning. Maciej Żenczykowski proposed another solution that doesn't require packet cloning and retains original device information - instead of returning RX_HANDLER_PASS for all link-local packets it's now limited only to packets from inactive slaves. At the same time, packets passed to bonding masters retain correct information about the originating device and PACKET_ORIGDEV can be used to determine it. This elegantly solves all issues so far: - link-local packets that were removed from bonding masters - LLDP daemons being forced to explicitly bind to slave interfaces - PACKET_ORIGDEV having no effect on bond interfaces Fixes: 6a9e461f6fe4 (bonding: pass link-local packets to bonding master also.) Reported-by: Vincent Bernat <vincent@bernat.ch> Signed-off-by: Michal Soltys <soltys@ziu.info> Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-22bonding: update nest level on unlinkWillem de Bruijn1-0/+3
[ Upstream commit 001e465f09a18857443489a57e74314a3368c805 ] A network device stack with multiple layers of bonding devices can trigger a false positive lockdep warning. Adding lockdep nest levels fixes this. Update the level on both enslave and unlink, to avoid the following series of events .. ip netns add test ip netns exec test bash ip link set dev lo addr 00:11:22:33:44:55 ip link set dev lo down ip link add dev bond1 type bond ip link add dev bond2 type bond ip link set dev lo master bond1 ip link set dev bond1 master bond2 ip link set dev bond1 nomaster ip link set dev bond2 master bond1 .. from still generating a splat: [ 193.652127] ====================================================== [ 193.658231] WARNING: possible circular locking dependency detected [ 193.664350] 4.20.0 #8 Not tainted [ 193.668310] ------------------------------------------------------ [ 193.674417] ip/15577 is trying to acquire lock: [ 193.678897] 00000000a40e3b69 (&(&bond->stats_lock)->rlock#3/3){+.+.}, at: bond_get_stats+0x58/0x290 [ 193.687851] but task is already holding lock: [ 193.693625] 00000000807b9d9f (&(&bond->stats_lock)->rlock#2/2){+.+.}, at: bond_get_stats+0x58/0x290 [..] [ 193.851092] lock_acquire+0xa7/0x190 [ 193.855138] _raw_spin_lock_nested+0x2d/0x40 [ 193.859878] bond_get_stats+0x58/0x290 [ 193.864093] dev_get_stats+0x5a/0xc0 [ 193.868140] bond_get_stats+0x105/0x290 [ 193.872444] dev_get_stats+0x5a/0xc0 [ 193.876493] rtnl_fill_stats+0x40/0x130 [ 193.880797] rtnl_fill_ifinfo+0x6c5/0xdc0 [ 193.885271] rtmsg_ifinfo_build_skb+0x86/0xe0 [ 193.890091] rtnetlink_event+0x5b/0xa0 [ 193.894320] raw_notifier_call_chain+0x43/0x60 [ 193.899225] netdev_change_features+0x50/0xa0 [ 193.904044] bond_compute_features.isra.46+0x1ab/0x270 [ 193.909640] bond_enslave+0x141d/0x15b0 [ 193.913946] do_set_master+0x89/0xa0 [ 193.918016] do_setlink+0x37c/0xda0 [ 193.921980] __rtnl_newlink+0x499/0x890 [ 193.926281] rtnl_newlink+0x48/0x70 [ 193.930238] rtnetlink_rcv_msg+0x171/0x4b0 [ 193.934801] netlink_rcv_skb+0xd1/0x110 [ 193.939103] rtnetlink_rcv+0x15/0x20 [ 193.943151] netlink_unicast+0x3b5/0x520 [ 193.947544] netlink_sendmsg+0x2fd/0x3f0 [ 193.951942] sock_sendmsg+0x38/0x50 [ 193.955899] ___sys_sendmsg+0x2ba/0x2d0 [ 193.960205] __x64_sys_sendmsg+0xad/0x100 [ 193.964687] do_syscall_64+0x5a/0x460 [ 193.968823] entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 7e2556e40026 ("bonding: avoid lockdep confusion in bond_get_stats()") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-21bonding: fix 802.3ad state sent to partner when unbinding slaveToni Peltonen1-0/+3
[ Upstream commit 3b5b3a3331d141e8f2a7aaae3a94dfa1e61ecbe4 ] Previously when unbinding a slave the 802.3ad implementation only told partner that the port is not suitable for aggregation by setting the port aggregation state from aggregatable to individual. This is not enough. If the physical layer still stays up and we only unbinded this port from the bond there is nothing in the aggregation status alone to prevent the partner from sending traffic towards us. To ensure that the partner doesn't consider this port at all anymore we should also disable collecting and distributing to signal that this actor is going away. Also clear AD_STATE_SYNCHRONIZATION to ensure partner exits collecting + distributing state. I have tested this behaviour againts Arista EOS switches with mlx5 cards (physical link stays up even when interface is down) and simulated the same situation virtually Linux <-> Linux with two network namespaces running two veth device pairs. In both cases setting aggregation to individual doesn't alone prevent traffic from being to sent towards this port given that the link stays up in partners end. Partner still keeps it's end in collecting + distributing state and continues until timeout is reached. In most cases this means we are losing the traffic partner sends towards our port while we wait for timeout. This is most visible with slow periodic time (LACP rate slow). Other open source implementations like Open VSwitch and libreswitch, and vendor implementations like Arista EOS, seem to disable collecting + distributing to when doing similar port disabling/detaching/removing change. With this patch kernel implementation would behave the same way and ensure partner doesn't consider our actor viable anymore. Signed-off-by: Toni Peltonen <peltzi@peltzi.fi> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Acked-by: Jonathan Toppins <jtoppins@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-21bonding/802.3ad: fix link_failure_count trackingJarod Wilson1-2/+2
commit ea53abfab960909d622ca37bcfb8e1c5378d21cc upstream. Commit 4d2c0cda07448ea6980f00102dc3964eb25e241c set slave->link to BOND_LINK_DOWN for 802.3ad bonds whenever invalid speed/duplex values were read, to fix a problem with slaves getting into weird states, but in the process, broke tracking of link failures, as going straight to BOND_LINK_DOWN when a link is indeed down (cable pulled, switch rebooted) means we broke out of bond_miimon_inspect()'s BOND_LINK_DOWN case because !link_state was already true, we never incremented commit, and never got a chance to call bond_miimon_commit(), where slave->link_failure_count would be incremented. I believe the simple fix here is to mark the slave as BOND_LINK_FAIL, and let bond_miimon_inspect() transition the link from _FAIL to either _UP or _DOWN, and in the latter case, we now get proper incrementing of link_failure_count again. Fixes: 4d2c0cda0744 ("bonding: speed/duplex update at NETDEV_UP event") CC: Mahesh Bandewar <maheshb@google.com> CC: David S. Miller <davem@davemloft.net> CC: netdev@vger.kernel.org CC: stable@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-04bonding: fix length of actor systemTobias Jungel1-2/+1
[ Upstream commit 414dd6fb9a1a1b59983aea7bf0f79f0085ecc5b8 ] The attribute IFLA_BOND_AD_ACTOR_SYSTEM is sent to user space having the length of sizeof(bond->params.ad_actor_system) which is 8 byte. This patch aligns the length to ETH_ALEN to have the same MAC address exposed as using sysfs. Fixes: f87fda00b6ed2 ("bonding: prevent out of bound accesses") Signed-off-by: Tobias Jungel <tobias.jungel@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-03bonding: fix warning messageMahesh Bandewar1-0/+1
RX queue config for bonding master could be different from its slave device(s). With the commit 6a9e461f6fe4 ("bonding: pass link-local packets to bonding master also."), the packet is reinjected into stack with skb->dev as bonding master. This potentially triggers the message: "bondX received packet on queue Y, but number of RX queues is Z" whenever the queue that packet is received on is higher than the numrxqueues on bonding master (Y > Z). Fixes: 6a9e461f6fe4 ("bonding: pass link-local packets to bonding master also.") Reported-by: John Sperbeck <jsperbeck@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-27bonding: avoid possible dead-lockMahesh Bandewar1-26/+17
Syzkaller reported this on a slightly older kernel but it's still applicable to the current kernel - ====================================================== WARNING: possible circular locking dependency detected 4.18.0-next-20180823+ #46 Not tainted ------------------------------------------------------ syz-executor4/26841 is trying to acquire lock: 00000000dd41ef48 ((wq_completion)bond_dev->name){+.+.}, at: flush_workqueue+0x2db/0x1e10 kernel/workqueue.c:2652 but task is already holding lock: 00000000768ab431 (rtnl_mutex){+.+.}, at: rtnl_lock net/core/rtnetlink.c:77 [inline] 00000000768ab431 (rtnl_mutex){+.+.}, at: rtnetlink_rcv_msg+0x412/0xc30 net/core/rtnetlink.c:4708 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (rtnl_mutex){+.+.}: __mutex_lock_common kernel/locking/mutex.c:925 [inline] __mutex_lock+0x171/0x1700 kernel/locking/mutex.c:1073 mutex_lock_nested+0x16/0x20 kernel/locking/mutex.c:1088 rtnl_lock+0x17/0x20 net/core/rtnetlink.c:77 bond_netdev_notify drivers/net/bonding/bond_main.c:1310 [inline] bond_netdev_notify_work+0x44/0xd0 drivers/net/bonding/bond_main.c:1320 process_one_work+0xc73/0x1aa0 kernel/workqueue.c:2153 worker_thread+0x189/0x13c0 kernel/workqueue.c:2296 kthread+0x35a/0x420 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415 -> #1 ((work_completion)(&(&nnw->work)->work)){+.+.}: process_one_work+0xc0b/0x1aa0 kernel/workqueue.c:2129 worker_thread+0x189/0x13c0 kernel/workqueue.c:2296 kthread+0x35a/0x420 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415 -> #0 ((wq_completion)bond_dev->name){+.+.}: lock_acquire+0x1e4/0x4f0 kernel/locking/lockdep.c:3901 flush_workqueue+0x30a/0x1e10 kernel/workqueue.c:2655 drain_workqueue+0x2a9/0x640 kernel/workqueue.c:2820 destroy_workqueue+0xc6/0x9d0 kernel/workqueue.c:4155 __alloc_workqueue_key+0xef9/0x1190 kernel/workqueue.c:4138 bond_init+0x269/0x940 drivers/net/bonding/bond_main.c:4734 register_netdevice+0x337/0x1100 net/core/dev.c:8410 bond_newlink+0x49/0xa0 drivers/net/bonding/bond_netlink.c:453 rtnl_newlink+0xef4/0x1d50 net/core/rtnetlink.c:3099 rtnetlink_rcv_msg+0x46e/0xc30 net/core/rtnetlink.c:4711 netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2454 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4729 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x5a0/0x760 net/netlink/af_netlink.c:1343 netlink_sendmsg+0xa18/0xfc0 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:632 ___sys_sendmsg+0x7fd/0x930 net/socket.c:2115 __sys_sendmsg+0x11d/0x290 net/socket.c:2153 __do_sys_sendmsg net/socket.c:2162 [inline] __se_sys_sendmsg net/socket.c:2160 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2160 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe other info that might help us debug this: Chain exists of: (wq_completion)bond_dev->name --> (work_completion)(&(&nnw->work)->work) --> rtnl_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(rtnl_mutex); lock((work_completion)(&(&nnw->work)->work)); lock(rtnl_mutex); lock((wq_completion)bond_dev->name); *** DEADLOCK *** 1 lock held by syz-executor4/26841: stack backtrace: CPU: 1 PID: 26841 Comm: syz-executor4 Not tainted 4.18.0-next-20180823+ #46 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113 print_circular_bug.isra.34.cold.55+0x1bd/0x27d kernel/locking/lockdep.c:1222 check_prev_add kernel/locking/lockdep.c:1862 [inline] check_prevs_add kernel/locking/lockdep.c:1975 [inline] validate_chain kernel/locking/lockdep.c:2416 [inline] __lock_acquire+0x3449/0x5020 kernel/locking/lockdep.c:3412 lock_acquire+0x1e4/0x4f0 kernel/locking/lockdep.c:3901 flush_workqueue+0x30a/0x1e10 kernel/workqueue.c:2655 drain_workqueue+0x2a9/0x640 kernel/workqueue.c:2820 destroy_workqueue+0xc6/0x9d0 kernel/workqueue.c:4155 __alloc_workqueue_key+0xef9/0x1190 kernel/workqueue.c:4138 bond_init+0x269/0x940 drivers/net/bonding/bond_main.c:4734 register_netdevice+0x337/0x1100 net/core/dev.c:8410 bond_newlink+0x49/0xa0 drivers/net/bonding/bond_netlink.c:453 rtnl_newlink+0xef4/0x1d50 net/core/rtnetlink.c:3099 rtnetlink_rcv_msg+0x46e/0xc30 net/core/rtnetlink.c:4711 netlink_rcv_skb+0x172/0x440 net/netlink/af_netlink.c:2454 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:4729 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x5a0/0x760 net/netlink/af_netlink.c:1343 netlink_sendmsg+0xa18/0xfc0 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:632 ___sys_sendmsg+0x7fd/0x930 net/socket.c:2115 __sys_sendmsg+0x11d/0x290 net/socket.c:2153 __do_sys_sendmsg net/socket.c:2162 [inline] __se_sys_sendmsg net/socket.c:2160 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2160 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457089 Code: fd b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f2df20a5c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f2df20a66d4 RCX: 0000000000457089 RDX: 0000000000000000 RSI: 0000000020000180 RDI: 0000000000000003 RBP: 0000000000930140 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000004d40b8 R14: 00000000004c8ad8 R15: 0000000000000001 Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-27bonding: pass link-local packets to bonding master also.Mahesh Bandewar1-2/+19
Commit b89f04c61efe ("bonding: deliver link-local packets with skb->dev set to link that packets arrived on") changed the behavior of how link-local-multicast packets are processed. The change in the behavior broke some legacy use cases where these packets are expected to arrive on bonding master device also. This patch passes the packet to the stack with the link it arrived on as well as passes to the bonding-master device to preserve the legacy use case. Fixes: b89f04c61efe ("bonding: deliver link-local packets with skb->dev set to link that packets arrived on") Reported-by: Michal Soltys <soltys@ziu.info> Signed-off-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-24bonding: use netpoll_poll_dev() helperEric Dumazet1-9/+2
We want to allow NAPI drivers to no longer provide ndo_poll_controller() method, as it has been proven problematic. team driver must not look at its presence, but instead call netpoll_poll_dev() which factorize the needed actions. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+12
The BTF conflicts were simple overlapping changes. The virtio_net conflict was an overlap of a fix of statistics counter, happening alongisde a move over to a bonafide statistics structure rather than counting value on the stack. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-01bonding: avoid lockdep confusion in bond_get_stats()Eric Dumazet1-2/+12
syzbot found that the following sequence produces a LOCKDEP splat [1] ip link add bond10 type bond ip link add bond11 type bond ip link set bond11 master bond10 To fix this, we can use the already provided nest_level. This patch also provides correct nesting for dev->addr_list_lock [1] WARNING: possible recursive locking detected 4.18.0-rc6+ #167 Not tainted -------------------------------------------- syz-executor751/4439 is trying to acquire lock: (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: spin_lock include/linux/spinlock.h:310 [inline] (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426 but task is already holding lock: (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: spin_lock include/linux/spinlock.h:310 [inline] (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&bond->stats_lock)->rlock); lock(&(&bond->stats_lock)->rlock); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by syz-executor751/4439: #0: (____ptrval____) (rtnl_mutex){+.+.}, at: rtnl_lock+0x17/0x20 net/core/rtnetlink.c:77 #1: (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: spin_lock include/linux/spinlock.h:310 [inline] #1: (____ptrval____) (&(&bond->stats_lock)->rlock){+.+.}, at: bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426 #2: (____ptrval____) (rcu_read_lock){....}, at: bond_get_stats+0x0/0x560 include/linux/compiler.h:215 stack backtrace: CPU: 0 PID: 4439 Comm: syz-executor751 Not tainted 4.18.0-rc6+ #167 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113 print_deadlock_bug kernel/locking/lockdep.c:1765 [inline] check_deadlock kernel/locking/lockdep.c:1809 [inline] validate_chain kernel/locking/lockdep.c:2405 [inline] __lock_acquire.cold.64+0x1fb/0x486 kernel/locking/lockdep.c:3435 lock_acquire+0x1e4/0x540 kernel/locking/lockdep.c:3924 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x2a/0x40 kernel/locking/spinlock.c:144 spin_lock include/linux/spinlock.h:310 [inline] bond_get_stats+0xb4/0x560 drivers/net/bonding/bond_main.c:3426 dev_get_stats+0x10f/0x470 net/core/dev.c:8316 bond_get_stats+0x232/0x560 drivers/net/bonding/bond_main.c:3432 dev_get_stats+0x10f/0x470 net/core/dev.c:8316 rtnl_fill_stats+0x4d/0xac0 net/core/rtnetlink.c:1169 rtnl_fill_ifinfo+0x1aa6/0x3fb0 net/core/rtnetlink.c:1611 rtmsg_ifinfo_build_skb+0xc8/0x190 net/core/rtnetlink.c:3268 rtmsg_ifinfo_event.part.30+0x45/0xe0 net/core/rtnetlink.c:3300 rtmsg_ifinfo_event net/core/rtnetlink.c:3297 [inline] rtnetlink_event+0x144/0x170 net/core/rtnetlink.c:4716 notifier_call_chain+0x180/0x390 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1735 call_netdevice_notifiers net/core/dev.c:1753 [inline] netdev_features_change net/core/dev.c:1321 [inline] netdev_change_features+0xb3/0x110 net/core/dev.c:7759 bond_compute_features.isra.47+0x585/0xa50 drivers/net/bonding/bond_main.c:1120 bond_enslave+0x1b25/0x5da0 drivers/net/bonding/bond_main.c:1755 bond_do_ioctl+0x7cb/0xae0 drivers/net/bonding/bond_main.c:3528 dev_ifsioc+0x43c/0xb30 net/core/dev_ioctl.c:327 dev_ioctl+0x1b5/0xcc0 net/core/dev_ioctl.c:493 sock_do_ioctl+0x1d3/0x3e0 net/socket.c:992 sock_ioctl+0x30d/0x680 net/socket.c:1093 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:500 [inline] do_vfs_ioctl+0x1de/0x1720 fs/ioctl.c:684 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701 __do_sys_ioctl fs/ioctl.c:708 [inline] __se_sys_ioctl fs/ioctl.c:706 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:706 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x440859 Code: e8 2c af 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b 10 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007ffc51a92878 EFLAGS: 00000213 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000000000440859 RDX: 0000000020000040 RSI: 0000000000008990 RDI: 0000000000000003 RBP: 0000000000000000 R08: 00000000004002c8 R09: 00000000004002c8 R10: 00000000022d5880 R11: 0000000000000213 R12: 0000000000007390 R13: 0000000000401db0 R14: 0000000000000000 R15: 0000000000000000 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-25Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-9/+14
2018-07-22bonding: don't cast const buf in sysfs storeNikolay Aleksandrov1-1/+6
As was recently discussed [1], let's avoid casting the const buf in bonding_sysfs_store_option and use kstrndup/kfree instead. [1] http://lists.openwall.net/netdev/2018/07/22/25 Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-21bonding: set default miimon value for non-arp modes if not setJarod Wilson1-9/+14
For some time now, if you load the bonding driver and configure bond parameters via sysfs using minimal config options, such as specifying nothing but the mode, relying on defaults for everything else, modes that cannot use arp monitoring (802.3ad, balance-tlb, balance-alb) all wind up with both arp_interval=0 (as it should be) and miimon=0, which means the miimon monitor thread never actually runs. This is particularly problematic for 802.3ad. For example, from an LNST recipe I've set up: $ modprobe bonding max_bonds=0" $ echo "+t_bond0" > /sys/class/net/bonding_masters" $ ip link set t_bond0 down" $ echo "802.3ad" > /sys/class/net/t_bond0/bonding/mode" $ ip link set ens1f1 down" $ echo "+ens1f1" > /sys/class/net/t_bond0/bonding/slaves" $ ip link set ens1f0 down" $ echo "+ens1f0" > /sys/class/net/t_bond0/bonding/slaves" $ ethtool -i t_bond0" $ ip link set ens1f1 up" $ ip link set ens1f0 up" $ ip link set t_bond0 up" $ ip addr add 192.168.9.1/24 dev t_bond0" $ ip addr add 2002::1/64 dev t_bond0" This bond comes up okay, but things look slightly suspect in /proc/net/bonding/t_bond0 output: $ grep -i mii /proc/net/bonding/t_bond0 MII Status: up MII Polling Interval (ms): 0 MII Status: up MII Status: up Now, pull a cable on one of the ports in the bond, then reconnect it, and you'll see: Slave Interface: ens1f0 MII Status: down Speed: 1000 Mbps Duplex: full I believe this became a major issue as of commit 4d2c0cda0744, which for 802.3ad bonds, sets slave->link = BOND_LINK_DOWN, with a comment about relying on link monitoring via miimon to set it correctly, but since the miimon work queue never runs, the link just stays marked down. If we simply tweak bond_option_mode_set() slightly, we can check for the non-arp modes having no miimon value set, and insert BOND_DEFAULT_MIIMON, which gets things back in full working order. This problem exists as far back as 4.14, and might be worth fixing in all stable trees since, though the work-around is to simply specify an miimon value yourself. Reported-by: Bob Ball <ball@umich.edu> Signed-off-by: Jarod Wilson <jarod@redhat.com> Acked-by: Mahesh Bandewar <maheshb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-09net: allow ndo_select_queue to pass netdevAlexander Duyck1-1/+2
This patch makes it so that instead of passing a void pointer as the accel_priv we instead pass a net_device pointer as sb_dev. Making this change allows us to pass the subordinate device through to the fallback function eventually so that we can keep the actual code in the ndo_select_queue call as focused on possible on the exception cases. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-06-13treewide: kzalloc() -> kcalloc()Kees Cook1-1/+1
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-07bonding: re-evaluate force_primary when the primary slave name changesXiangning Yu1-0/+1
There is a timing issue under active-standy mode, when bond_enslave() is called, bond->params.primary might not be initialized yet. Any time the primary slave string changes, bond->force_primary should be set to true to make sure the primary becomes the active slave. Signed-off-by: Xiangning Yu <yuxiangning@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds3-65/+112
Pull networking updates from David Miller: 1) Add Maglev hashing scheduler to IPVS, from Inju Song. 2) Lots of new TC subsystem tests from Roman Mashak. 3) Add TCP zero copy receive and fix delayed acks and autotuning with SO_RCVLOWAT, from Eric Dumazet. 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard Brouer. 5) Add ttl inherit support to vxlan, from Hangbin Liu. 6) Properly separate ipv6 routes into their logically independant components. fib6_info for the routing table, and fib6_nh for sets of nexthops, which thus can be shared. From David Ahern. 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP messages from XDP programs. From Nikita V. Shirokov. 8) Lots of long overdue cleanups to the r8169 driver, from Heiner Kallweit. 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau. 10) Add traffic condition monitoring to iwlwifi, from Luca Coelho. 11) Plumb extack down into fib_rules, from Roopa Prabhu. 12) Add Flower classifier offload support to igb, from Vinicius Costa Gomes. 13) Add UDP GSO support, from Willem de Bruijn. 14) Add documentation for eBPF helpers, from Quentin Monnet. 15) Add TLS tx offload to mlx5, from Ilya Lesokhin. 16) Allow applications to be given the number of bytes available to read on a socket via a control message returned from recvmsg(), from Soheil Hassas Yeganeh. 17) Add x86_32 eBPF JIT compiler, from Wang YanQing. 18) Add AF_XDP sockets, with zerocopy support infrastructure as well. From Björn Töpel. 19) Remove indirect load support from all of the BPF JITs and handle these operations in the verifier by translating them into native BPF instead. From Daniel Borkmann. 20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha. 21) Allow XDP programs to do lookups in the main kernel routing tables for forwarding. From David Ahern. 22) Allow drivers to store hardware state into an ELF section of kernel dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy. 23) Various RACK and loss detection improvements in TCP, from Yuchung Cheng. 24) Add TCP SACK compression, from Eric Dumazet. 25) Add User Mode Helper support and basic bpfilter infrastructure, from Alexei Starovoitov. 26) Support ports and protocol values in RTM_GETROUTE, from Roopa Prabhu. 27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard Brouer. 28) Add lots of forwarding selftests, from Petr Machata. 29) Add generic network device failover driver, from Sridhar Samudrala. * ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits) strparser: Add __strp_unpause and use it in ktls. rxrpc: Fix terminal retransmission connection ID to include the channel net: hns3: Optimize PF CMDQ interrupt switching process net: hns3: Fix for VF mailbox receiving unknown message net: hns3: Fix for VF mailbox cannot receiving PF response bnx2x: use the right constant Revert "net: sched: cls: Fix offloading when ingress dev is vxlan" net: dsa: b53: Fix for brcm tag issue in Cygnus SoC enic: fix UDP rss bits netdev-FAQ: clarify DaveM's position for stable backports rtnetlink: validate attributes in do_setlink() mlxsw: Add extack messages for port_{un, }split failures netdevsim: Add extack error message for devlink reload devlink: Add extack to reload and port_{un, }split operations net: metrics: add proper netlink validation ipmr: fix error path when ipmr_new_table fails ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds net: hns3: remove unused hclgevf_cfg_func_mta_filter netfilter: provide udp*_lib_lookup for nf_tproxy qed*: Utilize FW 8.37.2.0 ...
2018-05-25net: include hash policy in LAG changeupper infoJohn Hurley1-1/+26
LAG upper event notifiers contain the tx type used by the LAG device. Extend this to also include the hash policy used for tx types that utilize hashing. Signed-off-by: John Hurley <john.hurley@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23gso: limit udp gso to egress-only virtual devicesWillem de Bruijn1-2/+3
Until the udp receive stack supports large packets (UDP GRO), GSO packets must not loop from the egress to the ingress path. Revert the change that added NETIF_F_GSO_UDP_L4 to various virtual devices through NETIF_F_GSO_ENCAP_ALL as this included devices that may loop packets, such as veth and macvlan. Instead add it to specific devices that forward to another device's egress path, bonding and team. Fixes: 83aa025f535f ("udp: add gso support to virtual devices") CC: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17bonding: introduce link change helperTonghao Zhang1-20/+20
Introduce an new common helper to avoid redundancy. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16Revert "bonding: allow carrier and link status to determine link state"Debabrata Banerjee2-12/+7
This reverts commit 1386c36b30388f46a95100924bfcae75160db715. We don't want to encourage drivers to not report carrier status correctly, therefore remove this commit. Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16bonding: allow carrier and link status to determine link stateDebabrata Banerjee2-7/+12
In a mixed environment it may be difficult to tell if your hardware support carrier, if it does not it can always report true. With a new use_carrier option of 2, we can check both carrier and link status sequentially, instead of one or the other Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16bonding: allow use of tx hashing in balance-albDebabrata Banerjee3-13/+34
The rx load balancing provided by balance-alb is not mutually exclusive with using hashing for tx selection, and should provide a decent speed increase because this eliminates spinlocks and cache contention. Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16bonding: use common mac addr checksDebabrata Banerjee1-19/+9
Replace homegrown mac addr checks with faster defs from etherdevice.h Note that this will also prevent any rlb arp updates for multicast addresses, however this should have been forbidden anyway. Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16bonding: don't queue up extraneous rlb updatesDebabrata Banerjee1-6/+12
arps for incomplete entries can't be sent anyway. Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-16bonding: switch to proc_create_seq_dataChristoph Hellwig1-30/+6
And use proc private data directly instead of doing a detour through seq->private. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-6/+11
The bpf syscall and selftests conflicts were trivial overlapping changes. The r8169 change involved moving the added mdelay from 'net' into a different function. A TLS close bug fix overlapped with the splitting of the TLS state into separate TX and RX parts. I just expanded the tests in the bug fix from "ctx->conf == X" into "ctx->tx_conf == X && ctx->rx_conf == X". Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11bonding: use the skb_get/set_queue_mappingTonghao Zhang1-4/+4
Use the skb_get_queue_mapping, skb_set_queue_mapping and skb_rx_queue_recorded for skb queue_mapping in bonding driver, but not use it directly. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11bonding: replace the return value typeTonghao Zhang2-8/+12
The method ndo_start_xmit is defined as returning a netdev_tx_t, which is a typedef for an enum type, but the implementation in this driver returns an int. Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11bonding: send learning packets for vlans on slaveDebabrata Banerjee2-5/+10
There was a regression at some point from the intended functionality of commit f60c3704e87d ("bonding: Fix alb mode to only use first level vlans.") Given the return value vlan_get_encap_level() we need to store the nest level of the bond device, and then compare the vlan's encap level to this. Without this, this check always fails and learning packets are never sent. In addition, this same commit caused a regression in the behavior of balance_alb, which requires learning packets be sent for all interfaces using the slave's mac in order to load balance properly. For vlan's that have not set a user mac, we can send after checking one bit. Otherwise we need send the set mac, albeit defeating rx load balancing for that vlan. Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11bonding: do not allow rlb updates to invalid macDebabrata Banerjee1-1/+1
Make sure multicast, broadcast, and zero mac's cannot be the output of rlb updates, which should all be directed arps. Receive load balancing will be collapsed if any of these happen, as the switch will broadcast. Signed-off-by: Debabrata Banerjee <dbanerje@akamai.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-23bonding: do not set slave_dev npinfo before slave_enable_netpoll in bond_enslaveXin Long1-2/+1
After Commit 8a8efa22f51b ("bonding: sync netpoll code with bridge"), it would set slave_dev npinfo in slave_enable_netpoll when enslaving a dev if bond->dev->npinfo was set. However now slave_dev npinfo is set with bond->dev->npinfo before calling slave_enable_netpoll. With slave_dev npinfo set, __netpoll_setup called in slave_enable_netpoll will not call slave dev's .ndo_netpoll_setup(). It causes that the lower dev of this slave dev can't set its npinfo. One way to reproduce it: # modprobe bonding # brctl addbr br0 # brctl addif br0 eth1 # ifconfig bond0 192.168.122.1/24 up # ifenslave bond0 eth2 # systemctl restart netconsole # ifenslave bond0 br0 # ifconfig eth2 down # systemctl restart netconsole The netpoll won't really work. This patch is to remove that slave_dev npinfo setting in bond_enslave(). Fixes: 8a8efa22f51b ("bonding: sync netpoll code with bridge") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-36/+37
Minor conflicts in drivers/net/ethernet/mellanox/mlx5/core/en_rep.c, we had some overlapping changes: 1) In 'net' MLX5E_PARAMS_LOG_{SQ,RQ}_SIZE --> MLX5E_REP_PARAMS_LOG_{SQ,RQ}_SIZE 2) In 'net-next' params->log_rq_size is renamed to be params->log_rq_mtu_frames. 3) In 'net-next' params->hard_mtu is added. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27net: Drop pernet_operations::asyncKirill Tkhai1-1/+0
Synchronous pernet_operations are not allowed anymore. All are asynchronous. So, drop the structure member. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26bonding: process the err returned by dev_set_allmulti properly in bond_enslaveXin Long1-1/+4
When dev_set_promiscuity(1) succeeds but dev_set_allmulti(1) fails, dev_set_promiscuity(-1) should be done before going to the err path. Otherwise, dev->promiscuity will leak. Fixes: 7e1a1ac1fbaa ("bonding: Check return of dev_set_promiscuity/allmulti") Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2026-05-13 06:29:11 +0300