summaryrefslogtreecommitdiff
path: root/drivers/net/bna/bfa_ioc.c
AgeCommit message (Collapse)AuthorFilesLines
2011-08-11bna: Move the Brocade driverJeff Kirsher1-2326/+0
Moves the Brocade driver into drivers/net/ethernet/brocade/ and make the necessary Kconfig and Makefile changes. CC: Rasesh Mody <rmody@brocade.com> CC: Debashis Dutt <ddutt@brocade.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-03bna: Consolidated HW Registers for Supported HWsRasesh Mody1-1/+1
Change details: - Introducing new file bfi_reg.h for consolidating all supported hardware registers. This file completely replaces bfi_ctreg.h. - Updated ioc code as per register definition change. Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-23bna: HW Error Counter FixRasesh Mody1-0/+3
Change details: - Heartbeat failure counter is not incrementing under some scenarios. Update hbfails and hb_count stats during hwerror event. Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-23bna: Add HW Semaphore Unlock LogicRasesh Mody1-0/+25
Change details: - Added logic to unlock hw semaphore if the previos FW boot was from boot code (flash based) and the current FW initialization attempt is from OS driver. Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-23bna: IOC Event Name ChangeRasesh Mody1-10/+10
Change details: - Changed event name IOC_E_PFAILED to IOC_E_PFFAILED Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-23bna: Mboxq Flush When IOC DisabledRasesh Mody1-3/+4
Change details: - If there is a command pending in the mailbox, bfa_ioc_mbox_queue() enqueues the mailbox command to a pending command queue. Entries in this queue are not flushed when IOC is disabled. As a result, when IOC is re-enabled again, the stale entries in the pending command queue are posted to the mailbox. When these mailbox commands are processed by the FW and responses are sent, unexpected events are received by other modules' FSMs (f.e. bfa_msgq) which have not posted any mailbox commands after IOC was enabled. - Flush the pending mailbox command queue when IOC is disabled. Rename bfa_ioc_mbox_hbfail to bfa_ioc_mbox_flush. Call bfa_ioc_mbox_flush from bfa_iocpf_sm_disabled_entry() Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-23bna: State Machine Fault Handling CleanupRasesh Mody1-23/+23
Chnage details: - The module name is not used in case of state machine fault, hence no longer passing the module name to the fault handler. Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-23bna: IOC Event Notification EnhancementRasesh Mody1-21/+33
Change details: - Replace IOC HB failure event notification with a more generic mechanism that is capable of sending enble, disable, and failed events to registered modules. As a result, cee module event handling callback bfa_cee_hbfail() is replaced with bfa_cee_notify() so that it can receive and handle different events from IOC. Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-23bna: CheckPatch CleanupRasesh Mody1-1/+1
Change details: - Driver cleanup as per new checkpatch v0.31 Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20net:bna: fix compile warning of ‘bfa_ioc_smem_pgoff’ defined but not usedShan Wei1-7/+0
Fix the below compile warning: drivers/net/bna/bfa_ioc.c:1922: warning: ‘bfa_ioc_smem_pgoff’ defined but not used Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-19Merge branch 'master' of ↵David S. Miller1-13/+18
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/bnx2x/bnx2x_ethtool.c
2011-04-18bna: Fix set-but-unused variables.David S. Miller1-4/+2
The variable 'pgoff' is set but unused in bfa_nw_ioc_fwver_get() and bfa_ioc_download_fw(). Similarly for 'cmd_h' in bna_mbox_flush_q and the entirety of bna_rit_mod_uninit() is unused since variables are purely set but no action is made using them. Same for 'bna' in bna_rit_create() and 'ret' in bna_rx_create(). Just kill them off. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-15bna: fix for clean fw re-initializationRasesh Mody1-13/+18
During a kernel crash, bna control path state machine and firmware do not get a notification and hence are not cleanly shutdown. The registers holding driver/IOC state information are not reset back to valid disabled/parking values. This causes subsequent driver initialization to hang during kdump kernel boot. This patch, during the initialization of first PCI function, resets corresponding register when unclean shutown is detect by reading chip registers. This will make sure that ioc/fw gets clean re-initialization. Signed-off-by: Debashis Dutt <ddutt@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06bna: Fix for handling firmware heartbeat failureRasesh Mody1-7/+3
This patch contains a fix for gracefully handling firmware heartbeat failure instead of forcing panic. Signed-off-by: Debashis Dutt <ddutt@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-26bna: IOC failure auto recovery fixRasesh Mody1-286/+888
Change Details: - Made IOC auto_recovery synchronized and not timer based. - Only one PCI function will attempt to recover and reinitialize the ASIC on a failure, that too after all the active PCI functions acknowledge the IOC failure. Signed-off-by: Debashis Dutt <ddutt@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-26bna: IOC uninit check and misc cleanupRasesh Mody1-43/+2
Change Details: - Added a check in ioc firmware lock function to see if IOC is in BFI_IOC_UNINIT state or not. If it is not in UNINIT state and the last IOC boot was not done by OS driver, force IOC state to BFI_IOC_UNINIT - Unused macro and API cleanup Signed-off-by: Debashis Dutt <ddutt@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06bna: scope and dead code cleanupRasesh Mody1-7/+1
As suggested by Stephen Hemminger: 1) Made functions and data structures static wherever possible. 2) Removed unused code. Signed-off-by: Debashis Dutt <ddutt@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-19bna: off by oneDan Carpenter1-1/+1
The mod->mbhdlr[] array has BFI_MC_MAX elements. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-26bna: Fixed build break for allyesconfigRasesh Mody1-175/+74
This is the patch to fix the build break caused by multiple definitions of symbols between Brocade's FC/FCOE driver(BFA) and 10G Networking Driver(BNA). Changes are: 1. locally used functions are made static 2. unused functions are removed 3. using unique namespaces for the function names that must be globally visible Signed-off-by: Debashis Dutt <ddutt@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-08-24bna: Brocade 10Gb Ethernet device driverRasesh Mody1-0/+1839
This is patch 1/6 which contains linux driver source for Brocade's BR1010/BR1020 10Gb CEE capable ethernet adapter. Signed-off-by: Debashis Dutt <ddutt@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-14 14:59:30 +0300