summaryrefslogtreecommitdiff
path: root/drivers/net/benet/be_main.c
AgeCommit message (Collapse)AuthorFilesLines
2010-05-28be2net: Patch removes redundant while statement in loop.Sarveshwar Bandi1-1/+1
Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-26be2net: Bug fix to avoid disabling bottom half during firmware upgrade.Sarveshwar Bandi1-0/+1
Certain firmware commands/operations to upgrade firmware could take several seconds to complete. The code presently disables bottom half during these operations which could lead to unpredictable behaviour in certain cases. This patch now does all firmware upgrade operations asynchronously using a completion variable. Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-25be2net: Bug fix in init code in probeSarveshwar Bandi1-4/+6
PCI function reset needs to invoked after fw init ioctl is issued. Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-14drivers/net: Remove unnecessary returns from void function()sJoe Perches1-12/+0
This patch removes from drivers/net/ all the unnecessary return; statements that precede the last closing brace of void functions. It does not remove the returns that are immediately preceded by a label as gcc doesn't like that. It also does not remove null void functions with return. Done via: $ grep -rP --include=*.[ch] -l "return;\n}" net/ | \ xargs perl -i -e 'local $/ ; while (<>) { s/\n[ \t\n]+return;\n}/\n}/g; print; }' with some cleanups by hand. Compile tested x86 allmodconfig only. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-15drivers: net: use skb_headlen()Eric Dumazet1-2/+2
replaces (skb->len - skb->data_len) occurrences by skb_headlen(skb) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-08benet: fix the misusage of zero dma addressFUJITA Tomonori1-1/+1
benet driver wrongly assumes that zero is an invalid dma address (calls dma_unmap_page for only non zero dma addresses). Zero is a valid dma address on some architectures. The dma length can be used here. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-08benet: use the dma state API instead of the pci equivalentsFUJITA Tomonori1-2/+2
The DMA API is preferred. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-07Merge branch 'master' of ↵David S. Miller1-11/+10
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/bonding/bond_main.c drivers/net/via-velocity.c drivers/net/wireless/iwlwifi/iwl-agn.c
2010-04-02be2net: Adding PCI SRIOV supportSarveshwar Bandi1-47/+175
- Patch adds support to enable PCI SRIOV in the driver and changes to handle initialization of PCI virtual functions. - Function handler to change mac addresses for VF from its corresponding PF. Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-02be2net: fix bug in vlan rx path for big endian architectureAjit Khaparde1-2/+2
vlan traffic on big endian architecture is broken. Need to swap the vid before giving packet to stack. This patch fixes it. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-02be2net: fix flashing on big endian architecturesAjit Khaparde1-8/+7
Flashing is broken on big endian architectures like ppc. This patch fixes it. From: Naresh G <nareshg@serverengines.com> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-02be2net: fix a bug in flashing the redboot sectionAjit Khaparde1-1/+1
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-31net: remove redundant codeEric Dumazet1-1/+0
eth_type_trans(skb, netdev) does the "skb->dev = netdev;" initialization, we can remove it from various network drivers. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-25net/various: remove trailing space in messagesFrans Pop1-1/+1
Signed-off-by: Frans Pop <elendil@planet.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-23be2net: fix unmap_single/page() called incorrectly in Tx compl processingSathya Perla1-21/+12
The first wrb seen by tx compl processing does not have a dma handle in it. Currently, pci_unmap_single() is attempted on this wrb and pci_unmap_page() on the rest. So, pci_unmap_page() gets incorrectly called on the dma hdl of skb->data (that was mapped using map_single()). This patch fixes this issue. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-23be2net: handle dma mapping errors in Tx pathSathya Perla1-3/+38
Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08be2net: remove unused code in be_load_fwAjit Khaparde1-9/+0
This patch cleans up some unused code from be_load_fw(). Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-08be2net: remove usage of be_pci_funcAjit Khaparde1-1/+1
When PCI functions are virtuialized in applications by assigning PCI functions to VM (PCI passthrough), the be2net driver in the VM sees a different function number. So, use of PCI function number in any calculation will break existing code. This patch takes care of it. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-03be2net: download NCSI section during firmware updateSarveshwar Bandi1-3/+11
Adding code to update NCSI section while updating firmware on the controller. Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-02be2net: fix tx completion pollingSathya Perla1-24/+23
In tx/mcc polling, napi_complete() is being incorrectly called before reaping tx completions. This can cause tx compl processing to be scheduled on another cpu concurrently which can result in a panic. This if fixed by calling napi complete() after tx/mcc compl processing but before re-enabling interrupts (via a cq notify). Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-23net: convert multiple drivers to use netdev_for_each_mc_addr, part3Jiri Pirko1-3/+3
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-20be2net: Maintain tx and rx counters in driverAjit Khaparde1-9/+9
For certain skews of the BE adapter, H/W Tx and Rx counters could be common for more than one interface. Add Tx and Rx counters in the adapter structure (to maintain stats on a per interfae basis). Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-20be2net: update copyright datesAjit Khaparde1-1/+1
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-19be2net: free tx buffers when completions never arriveSathya Perla1-0/+12
be2net: free tx buffers when completions never arrive In cases like when a pci device is disconnected on an error, pending tx completions will never arrive. Unmap and free such buffers in the tx cleanup path. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18be2net: implement pci shutdown handlerSathya Perla1-0/+21
Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18be2net: fix rx-path to ignore a flush completionSathya Perla1-4/+19
The flush compl (compl with numfrags == 0; no data) is rcvd from hw to indicate completion of RXQ destory operation. Fix the RX path to not process it as RX data. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18be2net: don't rearm mcc cq when device is not openSathya Perla1-0/+5
When an MCC cmd is issued (via a netdev/ethtool op) while the device is not open, the MCC CQ gets processed but the EQ is not processed (as isr is not registered.) This can cause the EQ to become full. So, while the device is not open, CQ must not be re-armed to prevent EQ entries. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-18be2net: a mini optimization in rx_compl_process() codeSathya Perla1-10/+10
Introduce unlikely() for skb alloc failure and vlanf checks... Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-16be2net: implement EEH pci error recovery handlersSathya Perla1-1/+102
The code has been tested on IBM pSeries server. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12be2net: fix to limit max vlans supported in certain skewsAjit Khaparde1-13/+17
In certain skews the ASIC can support only 16 vlans per interface. Once the limit is crossed, the ASIC is programmed in vlan promiscuous mode. Switch off the vlan promiscuous mode once the number of vlans falls back to the max vlans supported. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12be2net: minor code optimizationsAjit Khaparde1-3/+5
Couple of code optimizations in the Rx path (to avoid a memset). From: Sathya P <sathyap@serverengines.com> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12be2net: bug fix in be_change_mtuAjit Khaparde1-2/+4
Current code allows the new mtu to cross the supported value. This patch fixes the boundary checks. From: Suresh R <sureshr@serverengines.com> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12be2net: bug fix for flashing the BladeEngine3 ASICAjit Khaparde1-112/+127
Now flashing both BE2 and BE3 devices is supported. From: Naresh G <nareshg@serverengines.com> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12be2net: remove unused pci device idAjit Khaparde1-1/+0
We are not going to use this device id. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-12net: use netdev_mc_count and netdev_mc_empty when appropriateJiri Pirko1-2/+3
This patch replaces dev->mc_count in all drivers (hopefully I didn't miss anything). Used spatch and did small tweaks and conding style changes when it was suitable. Jirka Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-02be2net: use eq-id to calculate cev-isr reg offsetSathya Perla1-1/+1
cev-isr reg offset for each function is better calculated using (any) eq-id alloted to that function instead of using pci-func number(which does not work in some configurations...) Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-29be2net: Fix memset() arg ordering.David S. Miller1-1/+1
Noticed by Ben Hutchings. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-28be2net: Bug fix to support newer generation of BE ASICAjit Khaparde1-2/+23
Bug fix in be2net for newer generation of BladeEngine ASIC. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-22be2net: fix bug in rx page postingSathya Perla1-3/+5
Pages are posted to the rxq in such a way that more than one frag can share the page. The last frag that uses the page unmaps the page. In the case when a page is not fully used (due to lack of space in rxq) the last frag that uses the page is not being set as a "last_page_user"; instead, the next frag in the rxq is incorrectly being set. The fix has also been tested on ppc64 with 64k pages... Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-12be2net: fix error in rx completion processing.Ajit Khaparde1-2/+2
There are certain skews of the NIC which have multiple bits set in adapter->cap. Use & instead of == to process rx completions. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-10Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits) tree-wide: fix misspelling of "definition" in comments reiserfs: fix misspelling of "journaled" doc: Fix a typo in slub.txt. inotify: remove superfluous return code check hdlc: spelling fix in find_pvc() comment doc: fix regulator docs cut-and-pasteism mtd: Fix comment in Kconfig doc: Fix IRQ chip docs tree-wide: fix assorted typos all over the place drivers/ata/libata-sff.c: comment spelling fixes fix typos/grammos in Documentation/edac.txt sysctl: add missing comments fs/debugfs/inode.c: fix comment typos sgivwfb: Make use of ARRAY_SIZE. sky2: fix sky2_link_down copy/paste comment error tree-wide: fix typos "couter" -> "counter" tree-wide: fix typos "offest" -> "offset" fix kerneldoc for set_irq_msi() spidev: fix double "of of" in comment comment typo fix: sybsystem -> subsystem ...
2009-12-07Merge branch 'for-next' into for-linusJiri Kosina1-1/+1
Conflicts: kernel/irq/chip.c
2009-12-04tree-wide: fix assorted typos all over the placeAndré Goddard Rosa1-1/+1
That is "success", "unknown", "through", "performance", "[re|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-04drivers/net: Move && and || to end of previous lineJoe Perches1-2/+2
Only files where David Miller is the primary git-signer. wireless, wimax, ixgbe, etc are not modified. Compile tested x86 allyesconfig only Not all files compiled (not x86 compatible) Added a few > 80 column lines, which I ignored. Existing checkpatch complaints ignored. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03be2net: Support for WoL using magic packet after suspend.Ajit Khaparde1-0/+44
Add support for WOL using Magic Packet after suspend is done. Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-03be2net: remove use of skb_dma_map/unmapAlexander Duyck1-11/+26
Due to the fact that skb_dma_map/unmap do not work correctly when a HW IOMMU is enabled it has been recommended to go about removing the calls from the network device drivers. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02be2net: fix unnecessary access to hardware to get link, port infoAjit Khaparde1-0/+3
Every time while doing ethtool->get_settings we are accessing the hardware to get link status and port information. This is not necessary. We now use the cached copy for this info and update it when the link status changes. From: Suresh R <sureshr@serverengines.com> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02be2net: Add be_rx_polls counterAjit Khaparde1-0/+1
Add be_rx_polls to count number of times NAPI called rx poll function. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02be2net: check for valid ether addressAjit Khaparde1-0/+7
Allow only valid ether addresses to be assigned and used for the interface. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-02be2net: initialize netdev->perm_addrAjit Khaparde1-0/+1
patch to initialize netdev->perm_addr Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-28 18:45:24 +0300