summaryrefslogtreecommitdiff
path: root/drivers/net/benet/be_cmds.c
AgeCommit message (Collapse)AuthorFilesLines
2011-07-22be2net: request native mode each time the card is resetSathya Perla1-1/+1
Currently be3-native mode is requested only in probe(). It must be requested, each time the card is reset either after an EEH error or after sleep/hibernation. Also, the be_cmd_check_native_mode() is better named be_cmd_req_native_mode() Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-01be2net: create/destroy rx-queues on interface open/closeSathya Perla1-7/+41
On some skews, the BE card sends pause frames (and not drop pkts) if there are no more posted buffers available for packet reception. This behaviour has a side effect: When an interface is disabled, buffers are no longer posted on the corresponding RX rings. All broadcast and multicast traffic being received on the port will quickly fill up the PMEM and cause pause push back. As the PMEM is shared by both the ports, all traffic being received on the other (enabled) port also gets stalled. The fix is to destroy RX rings when the interface is disabled. If there is no RX ring match in the RXF lookup, the packets are discarded and so don't hog the PMEM. The RXQ creation cmd must now use MCC instead of MBOX as they are are called post MCC queue creation. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-01be2net: fix certain cmd failure loggingSathya Perla1-7/+17
Some (older)versions of cards/fw may not recognize certain cmds and return illegal/unsupported errors. As long as the driver can handle this gracefully there is no need to log an error msg. Also finetuned 2 existing error log messages. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-22drivers/net: Remove casts of void *Joe Perches1-2/+1
Unnecessary casts of void * clutter the code. These are the remainder casts after several specific patches to remove netdev_priv and dev_priv. Done via coccinelle script (and a little editing): $ cat cast_void_pointer.cocci @@ type T; T *pt; void *pv; @@ - pt = (T *)pv; + pt = pv; Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Sjur Brændeland <sjur.brandeland@stericsson.com> Acked-By: Chris Snook <chris.snook@gmail.com> Acked-by: Jon Mason <jdmason@kudzu.us> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: David Dillow <dave@thedillows.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-06-01be2net: Fallback to the older opcode if MCC_CREATE_EXT opcode is not ↵Somnath Kotur1-2/+63
supported on the card Instead of failing the init/probe code in the driver fallback to the older opcode to ensure the driver is loaded thereby enabling users to upgrade the f/w to whatever version is required. Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-24be2net: hash key for rss-config cmd not setSathya Perla1-1/+2
A non-zero, non-descript value is needed as the hash key. The hash variable was left un-initialized; but sometimes it gets a zero value and hashing is not effective. The constant value used now (not of any significance) seems to work fine. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-16be2net: FW download for LancerShripad Nunjundarao1-1/+77
Added implementation of FW download feature for Lancer. Signed-off-by: Shripad Nunjundarao <shripad.nunjundarao@emulex.com> Signed-off-by: Sevin Xavier <selvin.xavier@emulex.com> Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-16be2net: Stats for LancerSelvin Xavier1-2/+53
Added Lancer stats implementation. Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-16be2net: Support for version 1 of stats for BE3Ajit Khaparde1-9/+23
Added support to get version 1 of the stats for BE3. Use old stats command for BE2. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: Selvin Xavier <selvin.xavier@emulex.com> Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13be2net: fix mbox polling for signal receptionSathya Perla1-2/+1
Sending mbox cmds require multiple steps of writing to the DB register and polling for an ack. Gettting interrupted in the middle by a signal breaks the mbox protocol. Use msleep() to not get interrupted. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-13be2net: handle signal reception while waiting for POSTSathya Perla1-5/+7
If waiting on POST returns prematurely (due to a signal), abort polling and return an error. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-12be2net: Use NTWK_RX_FILTER command for promiscous modePadmanabh Ratnakar1-15/+31
Use OPCODE_COMMON_NTWK_RX_FILTER command for promiscous mode as OPCODE_ETH_PROMISCUOUS command is getting deprecated. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-12be2net: In case of UE, do not dump registers for LancerPadmanabh Ratnakar1-1/+2
In case of UE, do not dump registers for Lancer as they are not supported. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-12be2net: Disable coalesce water mark mode of CQ for LancerPadmanabh Ratnakar1-2/+0
Disable coalesce water mark mode of CQ for Lancer Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-11Merge branch 'master' of ↵David S. Miller1-1/+1
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-3.6 Conflicts: drivers/net/benet/be_main.c
2011-05-09be2net: Fixed bugs related to PVID.Somnath Kotur1-1/+1
Fixed bug to make sure 'pvid' retrieval will work on big endian hosts. Fixed incorrect comparison between the Rx Completion's 16-bit VLAN TCI and the PVID. Now comparing only the relevant 12 bits corresponding to the VID. Renamed 'vid' field under Rx Completion to 'vlan_tag' to reflect accurate description. Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-25be2net: Fixed a bug in be_cmd_get_regs().Somnath Kotur1-25/+28
Same WRB entry was being reused over different iterations of a loop while issuing non-embedded IOCTL requests.Fixed couple of minor bugs in this path as well. Re-factored code to alloc/free memory for DMA outside of loop Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20be2net: pass domain id to be_cmd_link_status_queryAjit Khaparde1-1/+1
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-20be2net: fix be_mcc_compl_process to identify eth_get_stat commandAjit Khaparde1-1/+3
eth_get_statistics and vlan_config command have same opcode. Use opcode subsystem id to differentiate one from other. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-12Merge branch 'master' of ↵David S. Miller1-1/+1
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/smsc911x.c
2011-03-31Fix common misspellingsLucas De Marchi1-1/+1
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31be2net: Support for FAT dump retrieval using ethtool --register-dump optionSomnath Kotur1-0/+107
Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-16be2net: Copyright notice change. Update to Emulex instead of ServerEnginesAjit Khaparde1-5/+5
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-15be2net: changes for BE3 native mode supportSathya Perla1-0/+39
So far be2net has been using BE3 in legacy mode. It now checks for native mode capability and if available it sets it. In native mode, the RX_COMPL structure is different from that in legacy mode. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-08be2net: Change f/w command versions for LancerPadmanabh Ratnakar1-1/+7
Change f/w command versions for Lancer Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22be2net: use hba_port_num instead of port_numAjit Khaparde1-0/+54
Use hba_port_num for phy loopback and ethtool phy identification. From: Suresh R <suresh.reddy@emulex.com> Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22be2net: add code to display temperature of ASICAjit Khaparde1-0/+44
Add support to display temperature of ASIC via ethtool -S From: Somnath K <somnath.kotur@emulex.com> Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22be2net: fix to ignore transparent vlan ids wrongly indicated by NICAjit Khaparde1-0/+14
With transparent VLAN tagging, the ASIC wrongly indicates packets with VLAN ID. Strip them off in the driver. The VLAN Tag to be stripped will be given to the host as an async message. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22be2net: variable name changeAjit Khaparde1-2/+2
change occurances of stats_ioctl_sent to stats_cmd_sent Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-12be2net: gracefully handle situations when UE is detectedAjit Khaparde1-0/+15
Avoid accessing the hardware when UE is detected. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-12be2net: Fix broken priority setting when vlan tagging is enabled.Ajit Khaparde1-0/+1
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-12be2net: pass domain numbers for pmac_add/del functionsAjit Khaparde1-2/+4
be_cmd_pmac_add/del functions need to pass domain number to the firmware. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-12be2net: Use domain id when be_cmd_if_destroy is called.Ajit Khaparde1-1/+2
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-12be2net: endianness fix in be_cmd_set_qos().Ajit Khaparde1-2/+2
Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-06benet: Avoid potential null deref in be_cmd_get_seeprom_data()Ajit Khaparde1-0/+5
Found by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-17Merge branch 'master' of ↵David S. Miller1-30/+45
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/bnx2x/bnx2x.h drivers/net/wireless/iwlwifi/iwl-1000.c drivers/net/wireless/iwlwifi/iwl-6000.c drivers/net/wireless/iwlwifi/iwl-core.h drivers/vhost/vhost.c
2010-12-17be2net: use mutex instead of spin lock for mbox_lockIvan Vecera1-30/+45
Since the mbox polling uses the schedule_timeout, the mbox_lock should be a mutex and not a spin lock. The commit f25b03a replaced udelay() with schedule_timeout() but didn't change mbox_lock to semaphore or mutex. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-09Merge branch 'master' of ↵David S. Miller1-1/+1
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/ath/ath9k/ar9003_eeprom.c net/llc/af_llc.c
2010-12-08driver/net/benet: fix be_cmd_multicast_set() memcpy bugJoe Jin1-1/+1
Regarding benet be_cmd_multicast_set() function, now using netdev_for_each_mc_addr() helper for mac address copy, but when copying to req->mac[] did not increase of the index. Cc: Sathya Perla <sathyap@serverengines.com> Cc: Subbu Seetharaman <subbus@serverengines.com> Cc: Sarveshwar Bandi <sarveshwarb@serverengines.com> Cc: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: Joe Jin <joe.jin@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-06be2net: FW init cmd fix for lancerSathya Perla1-19/+8
Lancer can use the same pattern as BE to indicate a driver load to the FW. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-28be2net: adding support for Lancer family of CNAsSathya Perla1-23/+73
Key changes are: - EQ ids are not assigned consecutively in Lancer. So, fix mapping of MSIx vector to EQ-id. - BAR mapping and some req locations different for Lancer. - TCP,UDP,IP checksum fields must be compulsorily set in TX wrb for TSO in Lancer. - CEV_IST reg not present in Lancer; so, peek into event queue to check for new entries - cq_create and mcc_create cmd interface is different for Lancer; handle accordingly Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-25benet: remove dead codestephen hemminger1-36/+0
The following code and data are defined but never used in current driver. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-21be2net: Changes to use only priority codes allowed by f/wSomnath Kotur1-3/+58
Changes to use one of the priority codes allowed by CNA f/w for NIC traffic from host. The driver gets the bit map of the priority codes allowed for host traffic through a asynchronous message from the f/w that the driver subscribes to. Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-04be2net: add multiple RX queue supportSathya Perla1-3/+37
This patch adds multiple RX queue support to be2net. There are upto 4 extra rx-queues per port into which TCP/UDP traffic can be hashed into. Some of the ethtool stats are now displayed on a per queue basis. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-27drivers/net: return operator cleanupEric Dumazet1-2/+2
Change "return (EXPR);" to "return EXPR;" return is not a function, parentheses are not required. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-03be2net: remove a BUG_ON in be_cmds.cAjit Khaparde1-4/+2
Async notifications other than link status are possible in certain configurations. Remove the BUG_ON in the mcc completion processing path. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-03be2net: fix a bug in UE detection logicAjit Khaparde1-1/+1
The ONLINE registers can return 0xFFFFFFFF on more than one occassion. On systems that care, reading these registers could lead to problems. So the new code decides that the ASIC has encountered and error by reading the UE_STATUS_LOW/HIGH registers. AND them with the mask values and a non-zero result indicates an error. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-31be2net: fix to avoid sending get_stats request if one is already being ↵Ajit Khaparde1-0/+2
processed. GET_STATS request uses the same memory region as the response. If a new request for get stats is fired before the response for the previous get_stats request is received, the response will corrupt the new request, causing the f/w to misbehave. Signed-off-by: Somnath K <somnathk@serverengines.com> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-31be2net: add code to dump registers for debugAjit Khaparde1-0/+1
when the BE device becomes unresponsive, dump the registers to help debugging Signed-off-by: Somnath K <somnathk@serverengines.com> Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-23be2net: variable name changesAjit Khaparde1-2/+2
This patch changes names of some variables. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-31 08:09:59 +0300