| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 135ac3b84bcedae1860e7a9512d63166f42b736e ]
In most scenarios this variant is actually unused (VCR is written in
SSDR mode), but we need to provide an octal variant. The address is 24
bits but is sent over 4 bytes MSB first. This means we need to shift the
register address by one extra byte for the address to be correct.
I didn't catch this initially because the volatile register region is
256 bytes wide, so the write-then-read procedure did work with the small
register addresses I was using at that time: 0 and 1.
Fixes: 44a2f49b9bdc ("mtd: spinand: winbond: W35N octal DTR support")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8d655748aba1b603c54053a20322401dc1e5d782 ]
Both W35N02JW and W35N04JW diverge from W35N01JW when it comes to the
"data read" operation in ODTR mode. In order to stuff more address
bits (up to 18), the second command byte is replaced by the most
significant address bits, keeping the number of address bytes to 2.
Fixes: 44a2f49b9bdc ("mtd: spinand: winbond: W35N octal DTR support")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5e25407b68f460142539536e31fa20338db6146f ]
Some devices stuff address bits in the double byte opcode (in place of
the repeated byte) in order to be able to increase the size of the
devices, without adding extra address bytes.
Create a flag to identify those devices. When the flag is set, use the
"packed" variant for the read data operation.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Stable-dep-of: 8d655748aba1 ("mtd: spinand: winbond: Set the packed page read flag to W35N02/04JW")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 25a915fad503c2678902075565d47ddc2aa45db9 ]
Above 104MHz when in fast dual or quad I/O reads, the delay between
address and data cycles is too short. It is possible to reach higher
frequencies, up to 166MHz, by adding a few more dummy cycles through the
setting of the HS bit. Improve the condition for enabling this bit, and
also make sure we set it at soon as we go over 104MHz.
Fixes: f1a91175faaa ("mtd: spinand: winbond: Enable high-speed modes on w25n0xjw")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 848c13996c55fe4ea6bf5acc3ce6c8c5c944b5f6 ]
When dumping the OOB, the bytes at the end where actually copied from
the beginning of the OOB instead of current_offset.
That leads to something like:
OOB: ff ff ff ff ff ff ff ff ea 19 00 3a 83 db aa 8d
OOB: 99 09 c8 9a 90 36 35 7d aa 15 13 07 3d 97 b2 a4
OOB: a8 bb 19 b3 07 e9 f6 25 52 d7 1a 23 e2 7e 0a e4
OOB: 52 8a 09 d2 1a 86 3d cf b4 99 43 13 d3 90 33 0b
OOB: ff ff ff ff ff ff ff ff ea 19 00 3a 83 db aa 8d
OOB: 99 09 c8 9a 90 36 35 7d aa 15 13 07 3d 97 b2 a4
OOB: a8 bb 19 b3 07 e9 f6 25 52 d7 1a 23 e2 7e 0a e4
OOB: 52 8a 09 d2 1a 86 3d cf b4 99 43 13 d3 90 33 0b
instead of:
OOB: ff ff ff ff ff ff ff ff ea 19 00 3a 83 db aa 8d
OOB: 99 09 c8 9a 90 36 35 7d aa 15 13 07 3d 97 b2 a4
OOB: a8 bb 19 b3 07 e9 f6 25 52 d7 1a 23 e2 7e 0a e4
OOB: 52 8a 09 d2 1a 86 3d cf b4 99 43 13 d3 90 33 0b
OOB: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
OOB: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
OOB: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
OOB: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
(example with BCH16, user data [8,0], no scrambling)
*cur_off (offset from the beginning of the page) was compared to offset
(offset from the beginning of the OOB), and then, the
nand_change_read_column_op() sets the current position to the beginning
of the OOB instead of OOB+offset
Fixes: 15d6f118285f ("mtd: rawnand: sunxi: Stop supporting ECC_HW_SYNDROME mode")
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e882626c1747653f1f01ea9d12e278e613b11d0f ]
In order to parse sub-partitions, add_mtd_partitions() calls
parse_mtd_partitions() for all previously found partitions.
Each partition will end up being passed to parse_fixed_partitions(), and
its of_node will be treated as the ofpart_node.
Commit 7cce81df7d26 ("mtd: parsers: ofpart: fix OF node refcount leak in
parse_fixed_partitions()") added of_node_put() calls for ofpart_node on
all exit paths.
In the case where the partition passed to parse_fixed_partitions() has a
parent, it is treated as a dedicated partitions node, and of_node_put()
is wrongly called for it, even if of_node_get() was not called
explicitly.
On repeated bind / unbinds of the MTD, the extra of_node_put() ends up
decrementing the refcount down to 0, which should never happen,
resulting in the following error:
OF: ERROR: of_node_release() detected bad of_node_put() on
/soc/spi@80007000/flash@0/partitions/partition@0
Call of_node_get() to balance the call to of_node_put() done for
dedicated partitions nodes.
Fixes: 7cce81df7d26 ("mtd: parsers: ofpart: fix OF node refcount leak in parse_fixed_partitions()")
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0c87dea1aab86116211cb37387c404c9e9231c39 ]
ofpart_none can only be reached after the for_each_child_of_node() loop
finishes. for_each_child_of_node() correctly calls of_node_put() for all
device nodes it iterates over as long as we don't break or jump out of
the loop.
Calling of_node_put() inside the ofpart_none path will wrongly decrement
the ref count of the last node in the for_each_child_of_node() loop.
Move the call to of_node_put() under the ofpart_fail label to fix this.
Fixes: ebd5a74db74e ("mtd: ofpart: Check availability of reg property instead of name property")
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 94645aa41bf9ecb87c2ce78b1c3405bfb6074a37 ]
When the chip does not support top/bottom block protect, the tb_mask
must be set to 0, otherwise SR1 bit5 will be unexpectedly modified.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Fixes: 3dd8012a8eeb ("mtd: spi-nor: add TB (Top/Bottom) protect support")
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6d660fba6a32a34ad7d746d7f65317831daaf033 ]
Find two batches mt35xu512aba has different SFDP but with same
jedec ID. The batch which use the new version of SFDP contain
all the necessary information to support OCT DTR mode. The batch
with old version do not contain the OCT DTR command information,
but in fact it did support OCT DTR mode.
Current mt35xu512aba_post_sfdp_fixup() add some setting including
SNOR_CMD_READ_8_8_8_DTR, but still lack SNOR_CMD_PP_8_8_8_DTR. Meet
issue on the batch mt35xu512aba with old SFDP version. Because no
SNOR_CMD_PP_8_8_8_DTR, micron_st_nor_octal_dtr_en() will not be
called, then use SNOR_CMD_READ_8_8_8_DTR will meet issue.
Fixes: 44dd635cd632 ("mtd: spi-nor: micron-st: use SFDP of mt35xu512aba")
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
[pratyush@kernel.org: touch up the comment a bit]
Signed-off-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3620d67b48493c6252bbc873dc88dde81641d56b ]
After commit 5273cc6df984 ("mtd: spi-nor: core: Call
spi_nor_post_sfdp_fixups() only when SFDP is defined")
spi_nor_post_sfdp_fixups() isn't called anymore if no SFDP is detected.
Update the documentation accordingly.
Fixes: 5273cc6df984 ("mtd: spi-nor: core: Call spi_nor_post_sfdp_fixups() only when SFDP is defined")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 756564a536ecd8c9d33edd89f0647a91a0b03587 ]
When check read operation, need to setting the op.dummy.nbytes based
on current read operation rather than the nor->read_proto.
Fixes: 0e30f47232ab ("mtd: spi-nor: add support for DTR protocol")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b7c0982184b0661f5b1b805f3a56f1bd3757b63e ]
The condition for checking the disabled pinctrl state incorrectly checks
gf->enabled_state instead of gf->disabled_state. This causes misleading
error messages and could lead to incorrect behavior when only one of the
pinctrl states is defined.
Fix the condition to properly check gf->disabled_state.
Fixes: 9d3b5086f6d4 ("mtd: physmap_of_gemini: Handle pin control")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit e47029b977e747cb3a9174308fd55762cce70147 upstream.
Sashiko noticed an out-of-bounds read [1].
In spi_nor_params_show(), the snor_f_names array is passed to
spi_nor_print_flags() using sizeof(snor_f_names).
Since snor_f_names is an array of pointers, sizeof() returns the total
number of bytes occupied by the pointers
(element_count * sizeof(void *))
rather than the element count itself. On 64-bit systems, this makes the
passed length 8x larger than intended.
Inside spi_nor_print_flags(), the 'names_len' argument is used to
bounds-check the 'names' array access. An out-of-bounds read occurs
if a flag bit is set that exceeds the array's actual element count
but is within the inflated byte-size count.
Correct this by using ARRAY_SIZE() to pass the actual number of
string pointers in the array.
Cc: stable@vger.kernel.org
Fixes: 0257be79fc4a ("mtd: spi-nor: expose internal parameters via debugfs")
Closes: https://sashiko.dev/#/patchset/20260417-die-erase-fix-v2-1-73bb7004ebad%40infineon.com [1]
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Takahiro Kuwano <takahiro.kuwano@infineon.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7866ce992cf0d3c3b50fe8bf4acb1dbb173a2304 upstream.
Factory default for this bit is "set" (at least on the chips I have),
but we must make sure it is actually set by Linux explicitly, as the
bit is writable by an earlier stage.
Fixes: 6a804fb72de5 ("mtd: spinand: winbond: add support for serial NAND flash")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a0f64241d3566a49c0a9b33ba7ae458ae22003a9 upstream.
When writing to SST flash starting at an odd address, a single byte is
first programmed using the byte program (BP) command. After this
operation completes, the flash hardware automatically clears the Write
Enable Latch (WEL) bit.
If an AAI (Auto Address Increment) word program sequence follows, it
requires WEL to be set. Without re-enabling writes, the AAI sequence
fails.
Add spi_nor_write_enable() after the odd-address byte program when more
data needs to be written. Use a local boolean for clarity.
Fixes: b199489d37b2 ("mtd: spi-nor: add the framework for SPI NOR")
Cc: stable@vger.kernel.org
Signed-off-by: Sanjaikumar V S <sanjaikumar.vs@dicortech.com>
Tested-by: Hendrik Donner <hd@os-cillation.de>
Reviewed-by: Hendrik Donner <hd@os-cillation.de>
Signed-off-by: Pratyush Yadav (Google) <pratyush@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ca19808bc6fac7e29420d8508df569b346b3e339 upstream.
In docg3_release(), the docg3 pointer is obtained from
cascade->floors[0]->priv before the loop that calls
doc_release_device() on each floor. doc_release_device() frees the
docg3 struct via kfree(docg3) at line 1881. After the loop,
docg3->cascade->bch dereferences the already-freed pointer.
Fix this by accessing cascade->bch directly, which is equivalent
since docg3->cascade points back to the same cascade struct, and
is already available as a local variable. This also removes the
now-unused docg3 local variable.
Fixes: c8ae3f744ddc ("lib/bch: Rework a little bit the exported function names")
Cc: stable@vger.kernel.org
Signed-off-by: James Kim <james010kim@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Timings of the nand are adjusted by pl35x_nfc_setup_interface() but
actually applied by the pl35x_nand_select_target() function.
If there is only one nand chip, the pl35x_nand_select_target() will only
apply the timings once since the test at its beginning will always be true
after the first call to this function. As a result, the hardware will
keep using the default timings set at boot to detect the nand chip, not
the optimal ones.
With this patch, we program directly the new timings when
pl35x_nfc_setup_interface() is called.
Fixes: 08d8c62164a3 ("mtd: rawnand: pl353: Add support for the ARM PL353 SMC NAND controller")
Signed-off-by: Olivier Sobrie <olivier@sobrie.be>
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
This helper really is just a little helper for internal purposes, and is
I/O operation oriented, despite its name. It has already been misused
in commit 5008c3ec3f89 ("mtd: spi-nor: core: Check read CR support"), so
rename it to clarify its purpose: it is only useful for reads and page
programs.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Commit 5008c3ec3f89 ("mtd: spi-nor: core: Check read CR support") adds a
controller check to make sure the core will not use CR reads on
controllers not supporting them. The approach is valid but the fix is
incorrect. Unfortunately, the author could not catch it, because the
expected behavior was met. The patch indeed drops the RDCR capability,
but it does it for all controllers!
The issue comes from the use of spi_nor_spimem_check_op() which is an
internal helper dedicated to check read/write operations only, despite
its generic name.
This helper looks for the biggest number of address bytes that can be
used for a page operation and tries 4 then 3. It then calls the usual
spi-mem helpers to do the checks. These will always fail because there
is now an inconsistency: the address cycles are forced to 4 (then 3)
bytes, but the bus width during the address cycles rightfully remains
0. There is a non-zero address length but a zero address bus width,
which is an invalid combination.
The correct check in this case is to directly call spi_mem_supports_op()
which doesn't messes up with the operation content.
Fixes: 5008c3ec3f89 ("mtd: spi-nor: core: Check read CR support")
Cc: stable@vger.kernel.org
Acked-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Acked-by: Takahiro Kuwano <takahiro.kuwano@infineon.com>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
When oops_panic_write is set, the driver disables interrupts and
switches to PIO polling mode but still falls through into the DMA
path. DMA cannot be used reliably in panic context, so make the
DMA path an else branch to ensure only PIO is used during panic
writes.
Fixes: c1ac2dc34b51 ("mtd: rawnand: brcmnand: When oops in progress use pio and interrupt polling")
Signed-off-by: Kamal Dasu <kamal.dasu@broadcom.com>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
nand_lock() and nand_unlock() call into chip->ops.lock_area/unlock_area
without holding the NAND device lock. On controllers that implement
SET_FEATURES via multiple low-level PIO commands, these can race with
concurrent UBI/UBIFS background erase/write operations that hold the
device lock, resulting in cmd_pending conflicts on the NAND controller.
Add nand_get_device()/nand_release_device() around the lock/unlock
operations to serialize them against all other NAND controller access.
Fixes: 92270086b7e5 ("mtd: rawnand: Add support for manufacturer specific lock/unlock operation")
Signed-off-by: Kamal Dasu <kamal.dasu@broadcom.com>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
cadence_nand_init()
Fix wrong variable used for error checking after dma_alloc_coherent()
call. The function checks cdns_ctrl->dma_cdma_desc instead of
cdns_ctrl->cdma_desc, which could lead to incorrect error handling.
Fixes: ec4ba01e894d ("mtd: rawnand: Add new Cadence NAND driver to MTD subsystem")
Cc: stable@vger.kernel.org
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Given CONFIG_FORTIFY_SOURCE=y and a recent compiler,
commit 439a1bcac648 ("fortify: Use __builtin_dynamic_object_size() when
available") produces the warning below and an oops.
Searching for RedBoot partition table in 50000000.flash at offset 0x7e0000
------------[ cut here ]------------
WARNING: lib/string_helpers.c:1035 at 0xc029e04c, CPU#0: swapper/0/1
memcmp: detected buffer overflow: 15 byte read of buffer size 14
Modules linked in:
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.19.0 #1 NONE
As Kees said, "'names' is pointing to the final 'namelen' many bytes
of the allocation ... 'namelen' could be basically any length at all.
This fortify warning looks legit to me -- this code used to be reading
beyond the end of the allocation."
Since the size of the dynamic allocation is calculated with strlen()
we can use strcmp() instead of memcmp() and remain within bounds.
Cc: Kees Cook <kees@kernel.org>
Cc: stable@vger.kernel.org
Cc: linux-hardening@vger.kernel.org
Link: https://lore.kernel.org/all/202602151911.AD092DFFCD@keescook/
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Suggested-by: Kees Cook <kees@kernel.org>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Conversion performed via this Coccinelle script:
// SPDX-License-Identifier: GPL-2.0-only
// Options: --include-headers-for-types --all-includes --include-headers --keep-comments
virtual patch
@gfp depends on patch && !(file in "tools") && !(file in "samples")@
identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex,
kzalloc_obj,kzalloc_objs,kzalloc_flex,
kvmalloc_obj,kvmalloc_objs,kvmalloc_flex,
kvzalloc_obj,kvzalloc_objs,kvzalloc_flex};
@@
ALLOC(...
- , GFP_KERNEL
)
$ make coccicheck MODE=patch COCCI=gfp.cocci
Build and boot tested x86_64 with Fedora 42's GCC and Clang:
Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD:
- prioritize ofpart in physmap-core probing
- conversions to scoped for each OF child loops
Bindings:
- The bulk of the changes consists of binding fixes/updates to
restrict the use of undefined properties, which was mostly
ineffective in the current form because of the nesting of partition
nodes and the lack of compatible strings
- YAML conversions and the addition of a dma-coherent property in the
cdns,hp-nfc driver
SPI NAND:
- support for octal DTR modes (8D-8D-8D)
- support for Foresee F35SQB002G chips
And small misc fixes"
* tag 'mtd/for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (65 commits)
mtd: spi-nor: hisi-sfc: fix refcounting bug in hisi_spi_nor_register_all()
mtd: spinand: fix NULL pointer dereference in spinand_support_vendor_ops()
mtd: rawnand: pl353: Add message about ECC mode
mtd: rawnand: pl353: Fix software ECC support
mtd: spinand: winbond: Remove unneeded semicolon
dt-bindings: mtd: cdns,hp-nfc: Add dma-coherent property
mtd: spinand: Disable continuous read during probe
mtd: spinand: add Foresee F35SQB002G flash support
mtd: spinand: winbond: W35N octal DTR support
mtd: spinand: Add octal DTR support
mtd: spinand: Warn if using SSDR-only vendor commands in a non SSDR mode
mtd: spinand: Give the bus interface to the configuration helper
mtd: spinand: Propagate the bus interface across core helpers
mtd: spinand: Add support for setting a bus interface
mtd: spinand: Gather all the bus interface steps in one single function
mtd: spinand: winbond: Configure the IO mode after the dummy cycles
mtd: spinand: winbond: Rename IO_MODE register macro
mtd: spinand: winbond: Fix style
mtd: spinand: winbond: Register W35N vendor specific operation
mtd: spinand: winbond: Register W25N vendor specific operation
...
|
|
SPI NAND
- The major feature this release is the support for octal DTR
modes (8D-8D-8D).
- There has been as well a series of conversion to scoped for each OF
child loops.
- Support for Foresee F35SQB002G chips has been added.
Other changes are small fixes.
|
|
This was converted to a _scoped() loop but this of_node_put() was
accidentally left behind which is a double free.
Fixes: aa8cb72c2018 ("mtd: spi-nor: hisi-sfc: Simplify with scoped for each OF child loop")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The spinand_support_vendor_ops() helper unconditionally dereferences
info->vendor_ops. For chips that do not define vendor_ops, this pointer
is NULL, leading to a kernel panic during probe:
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000008
Add a guard to return early when vendor_ops is NULL. This prevents the
crash and allows SPI NAND devices without vendor-specific operations to
be probed correctly.
Fixes: fbc7538782f8 ("mtd: spinand: List vendor specific operations and make sure they are supported")
Cc: stable@vger.kernel.org
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
This just add some information on kernel log about the selected ECC
Signed-off-by: Andrea Scian <andrea.scian@dave.eu>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
We need to set also write_page_raw in ecc structure to allow
choosing SW ECC instead of HW one, otherwise write operation fail.
Fixes: 08d8c62164a322 ("mtd: rawnand: pl353: Add support for the ARM PL353 SMC NAND controller")
Signed-off-by: Andrea Scian <andrea.scian@dave.eu>
Cc: stable@kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Macronix serial NAND devices with continuous read support do not
clear the configuration register on soft reset and lack a hardware
reset pin. When continuous read is interrupted (e.g., during reboot),
the feature remains enabled at the device level.
With continuous read enabled, the OOB area becomes inaccessible and
all reads are instead directed to the main area. As a result, during
partition allocation as part of MTD device registration, the first two
bytes of the main area for the master block are read and indicate that
the block is bad. This process repeats for every subsequent block for
the partition.
All reads and writes that reference the BBT find no good blocks and
fail.
The only paths for recovery from this state are triggering the
continuous read feature by way of raw MTD reads or through a NAND
device power drain.
Disable continuous read explicitly during spinand probe to ensure
quiescent feature state.
Fixes: 631cfdd0520d ("mtd: spi-nand: Add continuous read support")
Cc: stable@vger.kernel.org
Signed-off-by: David LaPorte <dalaport@amazon.com>
Reviewed-by: Gunnar Kudrjavets <gunnarku@amazon.com>
Reviewed-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD fix from Miquel Raynal:
"A single late MTD fix, which reverts a fix that turned out to be
incorrect.
The observations of the committer was that the number of IDs to be
used to probe a chip was incorrect. It happened to be a limitation of
his controller, not a chip issue. Restore the chip description, a
solution must be found somewhere else"
* tag 'mtd/fixes-for-6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
Revert "mtd: spinand: esmt: fix id code for F50D1G41LB"
|
|
Add support of Foresee F35SQB002G spinand flash
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Extend the support for the W35N chip family by supporting the ODTR bus
interface. The chip is capable to run in this mode, which brings a
significant performance improvement.
1S-8S-8S:
# flash_speed /dev/mtd0 -c1 -d
eraseblock write speed is 7529 KiB/s
eraseblock read speed is 15058 KiB/s
8D-8D-8D:
# flash_speed /dev/mtd0 -c1 -d
eraseblock write speed is 9481 KiB/s
eraseblock read speed is 23272 KiB/s
This is +55% read speed and +26% write speed with the same hardware.
Tests have been conducted with a TI AM62A7 using the Cadence quad SPI
controller.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Create a new bus interface named ODTR for "octal DTR", which matches the
following pattern: 8D-8D-8D.
Add octal DTR support for all the existing core operations. Add a second
set of templates for this bus interface.
Give the possibility for drivers to register their read, write and
update cache variants as well as their vendor specific operations.
Check the SPI controller driver supports all the octal DTR commands that
we might need before switching to the ODTR bus interface.
Make the switch by calling ->configure_chip() with the ODTR
parameter. Fallback in case this step fails.
If someone ever attempts to suspend a chip in octal DTR mode, there are
changes that it will loose its configuration at resume. Prevent any
problem by explicitly switching back to SSDR while suspending. Note:
there is a limitation in the current approach, page I/Os are not
available as the dirmaps will be created for the ODTR bus interface if
that option is supported and not switched back to SSDR during
suspend. Switching them is possible but would be costly and would not
bring anything as right after resuming we will switch again to ODTR. In
case this capability is used for debug, developpers should mind to
destroy and recreate suitable direct mappings.
Finally, as a side effect, we increase the buffer for reading IDs to
6. No device at this point returns 6 bytes, but we support 5 bytes IDs,
which means in octal DTR mode we have no other choice than reading an
even number of bytes, hence 6.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Both Macronix and Winbond have chip specific operations which are SSDR
only. Trying to use them in an ODTR setup will fail and doing this is a
pure software bug. Warn explicitly in this case.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The chip configuration hook is the one responsible to actually switch
the switch between bus interfaces. It is natural to give it the bus
interface we expect with a new parameter. For now the only value we can
give is SSDR, but this is subject to change in the future, so add a bit
of extra logic in the implementations of this callback to make sure
both the core and the chip driver are aligned on the request.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
For now all drivers provide SSDR variants only. When we add support for
ODTR modes, there will be a need to differentiate the type of variant we
target as well as the need to check if we support one or the other type
of operations.
Pass this parameter to lower level helpers, which for now is unused, in
order to simplify the patch introducing ODTR support.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Create a bus interface enumeration, currently only containing the
one we support: SSDR, for single SDR, so any operation whose command is
sent over a single data line in SDR mode, ie. any operation matching
1S-XX-XX.
The main spinand_device structure gets a new parameter to store this
enumeration, for now unused. Of course it is set to SSDR during the SSDR
templates initialization to further clarify the state we are in at the
moment.
This member is subject to be used to know in which bus configuration we
and be updated by the core when we switch to faster mode(s).
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Writing the quad enable bit in one helper and doing the chip
configuration in another does not make much sense from a bus interface
setup point of view.
Instead, let's create a broader helper which is going to be in charge of
all the bus configuration steps at once. This will specifically allow to
transition to octal DDR mode, and even fallback to quad (if suppoorted)
or single mode otherwise.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
When we will change the bus interface, the action that actually performs
the transition is the IO mode register write. This means after the IO
mode register write, we should use the new bus interface. But the
->configure_chip() hook itself is not responsible of making this change
official, it is the caller that must act according to the return value.
Reorganize this helper to first configure the dummy cycles before
possibly switching to another bus interface.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Suffix the macro name with *_REG to align with the rest of the driver.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Add a missing new line in the middle of the driver.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Provide the Winbond W35N specific "write VCR register" operation to let
the core verify it is supported by the controller before using it.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Provide the Winbond W25N specific "select target" operation to let the
core verify it is supported by the controller before using it.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
