summaryrefslogtreecommitdiff
path: root/drivers/mtd
AgeCommit message (Collapse)AuthorFilesLines
2025-08-28mtd: rawnand: fsmc: Add missing check after DMA mapThomas Fourier1-0/+2
commit 6c4dab38431fee3d39a841d66ba6f2890b31b005 upstream. The DMA map functions can fail and should be tested for errors. Fixes: 4774fb0a48aa ("mtd: nand/fsmc: Add DMA support") Cc: stable@vger.kernel.org Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Rule: add Link: https://lore.kernel.org/stable/20250702065806.20983-2-fourier.thomas%40gmail.com Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-08-28mtd: rawnand: atmel: set pmecc data setup timeBalamanikandan Gunasundar1-0/+6
[ Upstream commit f552a7c7e0a14215cb8a6fd89e60fa3932a74786 ] Setup the pmecc data setup time as 3 clock cycles for 133MHz as recommended by the datasheet. Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver") Reported-by: Zixun LI <admin@hifiphile.com> Closes: https://lore.kernel.org/all/c015bb20-6a57-4f63-8102-34b3d83e0f5b@microchip.com Suggested-by: Ada Couprie Diaz <ada.coupriediaz@arm.com> Signed-off-by: Balamanikandan Gunasundar <balamanikandan.gunasundar@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-28mtd: rawnand: atmel: Fix dma_mapping_error() addressThomas Fourier1-1/+1
[ Upstream commit e1e6b933c56b1e9fda93caa0b8bae39f3f421e5c ] It seems like what was intended is to test if the dma_map of the previous line failed but the wrong dma address was passed. Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver") Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com> Rule: add Link: https://lore.kernel.org/stable/20250702064515.18145-2-fourier.thomas%40gmail.com Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-08-28mtd: fix possible integer overflow in erase_xfer()Ivan Stepchenko1-1/+1
[ Upstream commit 9358bdb9f9f54d94ceafc650deffefd737d19fdd ] The expression '1 << EraseUnitSize' is evaluated in int, which causes a negative result when shifting by 31 - the upper bound of the valid range [10, 31], enforced by scan_header(). This leads to incorrect extension when storing the result in 'erase->len' (uint64_t), producing a large unexpected value. Found by Linux Verification Center (linuxtesting.org) with Svace. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Ivan Stepchenko <sid@itb.spb.ru> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-06-27mtd: nand: sunxi: Add randomizer configuration before randomizer enableWentao Liang1-0/+1
commit 4a5a99bc79cdc4be63933653682b0261a67a0c9f upstream. In sunxi_nfc_hw_ecc_read_chunk(), the sunxi_nfc_randomizer_enable() is called without the config of randomizer. A proper implementation can be found in sunxi_nfc_hw_ecc_read_chunks_dma(). Add sunxi_nfc_randomizer_config() before the start of randomization. Fixes: 4be4e03efc7f ("mtd: nand: sunxi: add randomizer support") Cc: stable@vger.kernel.org # v4.6 Signed-off-by: Wentao Liang <vulab@iscas.ac.cn> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-06-27mtd: rawnand: sunxi: Add randomizer configuration in ↵Wentao Liang1-0/+1
sunxi_nfc_hw_ecc_write_chunk commit 44ed1f5ff73e9e115b6f5411744d5a22ea1c855b upstream. The function sunxi_nfc_hw_ecc_write_chunk() calls the sunxi_nfc_hw_ecc_write_chunk(), but does not call the configuration function sunxi_nfc_randomizer_config(). Consequently, the randomization might not conduct correctly, which will affect the lifespan of NAND flash. A proper implementation can be found in sunxi_nfc_hw_ecc_write_page_dma(). Add the sunxi_nfc_randomizer_config() to config randomizer. Fixes: 4be4e03efc7f ("mtd: nand: sunxi: add randomizer support") Cc: stable@vger.kernel.org # v4.6 Signed-off-by: Wentao Liang <vulab@iscas.ac.cn> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-02mtd: rawnand: Add status chack in r852_ready()Wentao Liang1-0/+3
commit b79fe1829975556854665258cf4d2476784a89db upstream. In r852_ready(), the dev get from r852_get_dev() need to be checked. An unstable device should not be ready. A proper implementation can be found in r852_read_byte(). Add a status check and return 0 when it is unstable. Fixes: 50a487e7719c ("mtd: rawnand: Pass a nand_chip object to chip->dev_ready()") Cc: stable@vger.kernel.org # v4.20+ Signed-off-by: Wentao Liang <vulab@iscas.ac.cn> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-02mtd: inftlcore: Add error check for inftl_read_oob()Wentao Liang1-4/+5
commit d027951dc85cb2e15924c980dc22a6754d100c7c upstream. In INFTL_findwriteunit(), the return value of inftl_read_oob() need to be checked. A proper implementation can be found in INFTL_deleteblock(). The status will be set as SECTOR_IGNORE to break from the while-loop correctly if the inftl_read_oob() fails. Fixes: 8593fbc68b0d ("[MTD] Rework the out of band handling completely") Cc: stable@vger.kernel.org # v2.6+ Signed-off-by: Wentao Liang <vulab@iscas.ac.cn> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-02mtd: Replace kcalloc() with devm_kcalloc()Jiasheng Jiang1-6/+3
commit 1b61a59876f0eafc19b23007c522ee407f55dbec upstream. Replace kcalloc() with devm_kcalloc() to prevent memory leaks in case of errors. Fixes: 78c08247b9d3 ("mtd: Support kmsg dumper based on pstore/blk") Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-05-02mtd: rawnand: brcmnand: fix PM resume warningKamal Dasu1-1/+1
commit ddc210cf8b8a8be68051ad958bf3e2cef6b681c2 upstream. Fixed warning on PM resume as shown below caused due to uninitialized struct nand_operation that checks chip select field : WARN_ON(op->cs >= nanddev_ntargets(&chip->base) [ 14.588522] ------------[ cut here ]------------ [ 14.588529] WARNING: CPU: 0 PID: 1392 at drivers/mtd/nand/raw/internals.h:139 nand_reset_op+0x1e0/0x1f8 [ 14.588553] Modules linked in: bdc udc_core [ 14.588579] CPU: 0 UID: 0 PID: 1392 Comm: rtcwake Tainted: G W 6.14.0-rc4-g5394eea10651 #16 [ 14.588590] Tainted: [W]=WARN [ 14.588593] Hardware name: Broadcom STB (Flattened Device Tree) [ 14.588598] Call trace: [ 14.588604] dump_backtrace from show_stack+0x18/0x1c [ 14.588622] r7:00000009 r6:0000008b r5:60000153 r4:c0fa558c [ 14.588625] show_stack from dump_stack_lvl+0x70/0x7c [ 14.588639] dump_stack_lvl from dump_stack+0x18/0x1c [ 14.588653] r5:c08d40b0 r4:c1003cb0 [ 14.588656] dump_stack from __warn+0x84/0xe4 [ 14.588668] __warn from warn_slowpath_fmt+0x18c/0x194 [ 14.588678] r7:c08d40b0 r6:c1003cb0 r5:00000000 r4:00000000 [ 14.588681] warn_slowpath_fmt from nand_reset_op+0x1e0/0x1f8 [ 14.588695] r8:70c40dff r7:89705f41 r6:36b4a597 r5:c26c9444 r4:c26b0048 [ 14.588697] nand_reset_op from brcmnand_resume+0x13c/0x150 [ 14.588714] r9:00000000 r8:00000000 r7:c24f8010 r6:c228a3f8 r5:c26c94bc r4:c26b0040 [ 14.588717] brcmnand_resume from platform_pm_resume+0x34/0x54 [ 14.588735] r5:00000010 r4:c0840a50 [ 14.588738] platform_pm_resume from dpm_run_callback+0x5c/0x14c [ 14.588757] dpm_run_callback from device_resume+0xc0/0x324 [ 14.588776] r9:c24f8054 r8:c24f80a0 r7:00000000 r6:00000000 r5:00000010 r4:c24f8010 [ 14.588779] device_resume from dpm_resume+0x130/0x160 [ 14.588799] r9:c22539e4 r8:00000010 r7:c22bebb0 r6:c24f8010 r5:c22539dc r4:c22539b0 [ 14.588802] dpm_resume from dpm_resume_end+0x14/0x20 [ 14.588822] r10:c2204e40 r9:00000000 r8:c228a3fc r7:00000000 r6:00000003 r5:c228a414 [ 14.588826] r4:00000010 [ 14.588828] dpm_resume_end from suspend_devices_and_enter+0x274/0x6f8 [ 14.588848] r5:c228a414 r4:00000000 [ 14.588851] suspend_devices_and_enter from pm_suspend+0x228/0x2bc [ 14.588868] r10:c3502910 r9:c3501f40 r8:00000004 r7:c228a438 r6:c0f95e18 r5:00000000 [ 14.588871] r4:00000003 [ 14.588874] pm_suspend from state_store+0x74/0xd0 [ 14.588889] r7:c228a438 r6:c0f934c8 r5:00000003 r4:00000003 [ 14.588892] state_store from kobj_attr_store+0x1c/0x28 [ 14.588913] r9:00000000 r8:00000000 r7:f09f9f08 r6:00000004 r5:c3502900 r4:c0283250 [ 14.588916] kobj_attr_store from sysfs_kf_write+0x40/0x4c [ 14.588936] r5:c3502900 r4:c0d92a48 [ 14.588939] sysfs_kf_write from kernfs_fop_write_iter+0x104/0x1f0 [ 14.588956] r5:c3502900 r4:c3501f40 [ 14.588960] kernfs_fop_write_iter from vfs_write+0x250/0x420 [ 14.588980] r10:c0e14b48 r9:00000000 r8:c25f5780 r7:00443398 r6:f09f9f68 r5:c34f7f00 [ 14.588983] r4:c042a88c [ 14.588987] vfs_write from ksys_write+0x74/0xe4 [ 14.589005] r10:00000004 r9:c25f5780 r8:c02002fA0 r7:00000000 r6:00000000 r5:c34f7f00 [ 14.589008] r4:c34f7f00 [ 14.589011] ksys_write from sys_write+0x10/0x14 [ 14.589029] r7:00000004 r6:004421c0 r5:00443398 r4:00000004 [ 14.589032] sys_write from ret_fast_syscall+0x0/0x5c [ 14.589044] Exception stack(0xf09f9fa8 to 0xf09f9ff0) [ 14.589050] 9fa0: 00000004 00443398 00000004 00443398 00000004 00000001 [ 14.589056] 9fc0: 00000004 00443398 004421c0 00000004 b6ecbd58 00000008 bebfbc38 0043eb78 [ 14.589062] 9fe0: 00440eb0 bebfbaf8 b6de18a0 b6e579e8 [ 14.589065] ---[ end trace 0000000000000000 ]--- The fix uses the higher level nand_reset(chip, chipnr); where chipnr = 0, when doing PM resume operation in compliance with the controller support for single die nand chip. Switching from nand_reset_op() to nand_reset() implies more than just setting the cs field op->cs, it also reconfigures the data interface (ie. the timings). Tested and confirmed the NAND chip is in sync timing wise with host after the fix. Fixes: 97d90da8a886 ("mtd: nand: provide several helpers to do common NAND operations") Cc: stable@vger.kernel.org Signed-off-by: Kamal Dasu <kamal.dasu@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-13mtd: rawnand: cadence: fix unchecked dereferenceNiravkumar L Rabara1-2/+4
commit 60255f3704fde70ed3c4d62f919aa4b46f841f70 upstream. Add NULL check before variable dereference to fix static checker warning. Fixes: d76d22b5096c ("mtd: rawnand: cadence: use dma_map_resource for sdma address") Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/e448a22c-bada-448d-9167-7af71305130d@stanley.mountain/ Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-13mtd: rawnand: cadence: fix incorrect device in dma_unmap_singleNiravkumar L Rabara1-2/+2
commit f37d135b42cb484bdecee93f56b9f483214ede78 upstream. dma_map_single is using physical/bus device (DMA) but dma_unmap_single is using framework device(NAND controller), which is incorrect. Fixed dma_unmap_single to use correct physical/bus device. Fixes: ec4ba01e894d ("mtd: rawnand: Add new Cadence NAND driver to MTD subsystem") Cc: stable@vger.kernel.org Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-13mtd: rawnand: cadence: use dma_map_resource for sdma addressNiravkumar L Rabara1-4/+25
commit d76d22b5096c5b05208fd982b153b3f182350b19 upstream. Remap the slave DMA I/O resources to enhance driver portability. Using a physical address causes DMA translation failure when the ARM SMMU is enabled. Fixes: ec4ba01e894d ("mtd: rawnand: Add new Cadence NAND driver to MTD subsystem") Cc: stable@vger.kernel.org Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-13mtd: rawnand: cadence: fix error code in cadence_nand_init()Niravkumar L Rabara1-5/+4
commit 2b9df00cded911e2ca2cfae5c45082166b24f8aa upstream. Replace dma_request_channel() with dma_request_chan_by_mask() and use helper functions to return proper error code instead of fixed -EBUSY. Fixes: ec4ba01e894d ("mtd: rawnand: Add new Cadence NAND driver to MTD subsystem") Cc: stable@vger.kernel.org Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-13mtd: onenand: Fix uninitialized retlen in do_otp_read()Ivan Stepchenko1-0/+1
commit 70a71f8151b9879b0950668ce3ad76263261fee0 upstream. The function do_otp_read() does not set the output parameter *retlen, which is expected to contain the number of bytes actually read. As a result, in onenand_otp_walk(), the tmp_retlen variable remains uninitialized after calling do_otp_walk() and used to change the values of the buf, len and retlen variables. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 49dc08eeda70 ("[MTD] [OneNAND] fix numerous races") Cc: stable@vger.kernel.org Signed-off-by: Ivan Stepchenko <sid@itb.spb.ru> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-03-13mtd: hyperbus: hbmc-am654: fix an OF node reference leakJoe Hattori1-6/+13
[ Upstream commit bf5821909eb9c7f5d07d5c6e852ead2c373c94a0 ] In am654_hbmc_platform_driver, .remove() and the error path of .probe() do not decrement the refcount of an OF node obtained by of_get_next_child(). Fix this by adding of_node_put() calls. Fixes: aca31ce96814 ("mtd: hyperbus: hbmc-am654: Fix direct mapping setup flash access") Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-01-09mtd: rawnand: fix double free in atmel_pmecc_create_user()Dan Carpenter1-3/+1
commit d8e4771f99c0400a1873235704b28bb803c83d17 upstream. The "user" pointer was converted from being allocated with kzalloc() to being allocated by devm_kzalloc(). Calling kfree(user) will lead to a double free. Fixes: 6d734f1bfc33 ("mtd: rawnand: atmel: Fix possible memory leak") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-09mtd: diskonchip: Cast an operand to prevent potential overflowZichen Xie1-1/+1
commit 9b458e8be0d13e81ed03fffa23f8f9b528bbd786 upstream. There may be a potential integer overflow issue in inftl_partscan(). parts[0].size is defined as "uint64_t" while mtd->erasesize and ip->firstUnit are defined as 32-bit unsigned integer. The result of the calculation will be limited to 32 bits without correct casting. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Zichen Xie <zichenxie0106@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-14ubi: fastmap: Fix duplicate slab cache names while attachingZhihao Cheng1-6/+6
[ Upstream commit bcddf52b7a17adcebc768d26f4e27cf79adb424c ] Since commit 4c39529663b9 ("slab: Warn on duplicate cache names when DEBUG_VM=y"), the duplicate slab cache names can be detected and a kernel WARNING is thrown out. In UBI fast attaching process, alloc_ai() could be invoked twice with the same slab cache name 'ubi_aeb_slab_cache', which will trigger following warning messages: kmem_cache of name 'ubi_aeb_slab_cache' already exists WARNING: CPU: 0 PID: 7519 at mm/slab_common.c:107 __kmem_cache_create_args+0x100/0x5f0 Modules linked in: ubi(+) nandsim [last unloaded: nandsim] CPU: 0 UID: 0 PID: 7519 Comm: modprobe Tainted: G 6.12.0-rc2 RIP: 0010:__kmem_cache_create_args+0x100/0x5f0 Call Trace: __kmem_cache_create_args+0x100/0x5f0 alloc_ai+0x295/0x3f0 [ubi] ubi_attach+0x3c3/0xcc0 [ubi] ubi_attach_mtd_dev+0x17cf/0x3fa0 [ubi] ubi_init+0x3fb/0x800 [ubi] do_init_module+0x265/0x7d0 __x64_sys_finit_module+0x7a/0xc0 The problem could be easily reproduced by loading UBI device by fastmap with CONFIG_DEBUG_VM=y. Fix it by using different slab names for alloc_ai() callers. Fixes: d2158f69a7d4 ("UBI: Remove alloc_ai() slab name from parameter list") Fixes: fdf10ed710c0 ("ubi: Rework Fastmap attach base code") Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-14ubi: wl: Put source PEB into correct list if trying locking LEB failedZhihao Cheng1-1/+8
commit d610020f030bec819f42de327c2bd5437d2766b3 upstream. During wear-leveing work, the source PEB will be moved into scrub list when source LEB cannot be locked in ubi_eba_copy_leb(), which is wrong for non-scrub type source PEB. The problem could bring extra and ineffective wear-leveing jobs, which makes more or less negative effects for the life time of flash. Specifically, the process is divided 2 steps: 1. wear_leveling_worker // generate false scrub type PEB ubi_eba_copy_leb // MOVE_RETRY is returned leb_write_trylock // trylock failed scrubbing = 1; e1 is put into ubi->scrub 2. wear_leveling_worker // schedule false scrub type PEB for wl scrubbing = 1 e1 = rb_entry(rb_first(&ubi->scrub)) The problem can be reproduced easily by running fsstress on a small UBIFS partition(<64M, simulated by nandsim) for 5~10mins (CONFIG_MTD_UBI_FASTMAP=y,CONFIG_MTD_UBI_WL_THRESHOLD=50). Following message is shown: ubi0: scrubbed PEB 66 (LEB 0:10), data moved to PEB 165 Since scrub type source PEB has set variable scrubbing as '1', and variable scrubbing is checked before variable keep, so the problem can be fixed by setting keep variable as 1 directly if the source LEB cannot be locked. Fixes: e801e128b220 ("UBI: fix missing scrub when there is a bit-flip") CC: stable@vger.kernel.org Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-14mtd: rawnand: atmel: Fix possible memory leakMiquel Raynal2-9/+1
[ Upstream commit 6d734f1bfc336aaea91313a5632f2f197608fadd ] The pmecc "user" structure is allocated in atmel_pmecc_create_user() and was supposed to be freed with atmel_pmecc_destroy_user(), but this other helper is never called. One solution would be to find the proper location to call the destructor, but the trend today is to switch to device managed allocations, which in this case fits pretty well. Replace kzalloc() by devm_kzalloc() and drop the destructor entirely. Reported-by: "Dr. David Alan Gilbert" <linux@treblig.org> Closes: https://lore.kernel.org/all/ZvmIvRJCf6VhHvpo@gallifrey/ Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20241001203149.387655-1-miquel.raynal@bootlin.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-17mtd: powernv: Add check devm_kasprintf() returned valueCharles Han1-0/+3
[ Upstream commit 395999829880a106bb95f0ce34e6e4c2b43c6a5d ] devm_kasprintf() can return a NULL pointer on failure but this returned value is not checked. Fixes: acfe63ec1c59 ("mtd: Convert to using %pOFn instead of device_node.name") Signed-off-by: Charles Han <hanchunchao@inspur.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20240828092427.128177-1-hanchunchao@inspur.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-17mtd: slram: insert break after errors in parsing the mapMirsad Todorovac1-0/+2
[ Upstream commit 336c218dd7f0588ed8a7345f367975a00a4f003f ] GCC 12.3.0 compiler on linux-next next-20240709 tree found the execution path in which, due to lazy evaluation, devlength isn't initialised with the parsed string: 289 while (map) { 290 devname = devstart = devlength = NULL; 291 292 if (!(devname = strsep(&map, ","))) { 293 E("slram: No devicename specified.\n"); 294 break; 295 } 296 T("slram: devname = %s\n", devname); 297 if ((!map) || (!(devstart = strsep(&map, ",")))) { 298 E("slram: No devicestart specified.\n"); 299 } 300 T("slram: devstart = %s\n", devstart); → 301 if ((!map) || (!(devlength = strsep(&map, ",")))) { 302 E("slram: No devicelength / -end specified.\n"); 303 } → 304 T("slram: devlength = %s\n", devlength); 305 if (parse_cmdline(devname, devstart, devlength) != 0) { 306 return(-EINVAL); 307 } Parsing should be finished after map == NULL, so a break is best inserted after each E("slram: ... \n") error message. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Mirsad Todorovac <mtodorovac69@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20240711234319.637824-1-mtodorovac69@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-08-19ubi: eba: properly rollback inside self_check_ebaFedor Pchelkin1-1/+2
commit 745d9f4a31defec731119ee8aad8ba9f2536dd9a upstream. In case of a memory allocation failure in the volumes loop we can only process the already allocated scan_eba and fm_eba array elements on the error path - others are still uninitialized. Found by Linux Verification Center (linuxtesting.org). Fixes: 00abf3041590 ("UBI: Add self_check_eba()") Cc: stable@vger.kernel.org Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-19mtd: make mtd_test.c a separate moduleArnd Bergmann2-17/+26
[ Upstream commit a5cf054d325e6f362e82fe6d124a1871a4af8174 ] This file gets linked into nine different modules, which causes a warning: scripts/Makefile.build:236: drivers/mtd/tests/Makefile: mtd_test.o is added to multiple modules: mtd_nandbiterrs mtd_oobtest mtd_pagetest mtd_readtest mtd_speedtest mtd_stresstest mtd_subpagetest mtd_torturetest Make it a separate module instead. Fixes: a995c792280d ("mtd: tests: rename sources in order to link a helper object") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20240529095049.1915393-1-arnd@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-18mtd: rawnand: Bypass a couple of sanity checks during NAND identificationMiquel Raynal1-24/+31
commit 8754d9835683e8fab9a8305acdb38a3aeb9d20bd upstream. Early during NAND identification, mtd_info fields have not yet been initialized (namely, writesize and oobsize) and thus cannot be used for sanity checks yet. Of course if there is a misuse of nand_change_read_column_op() so early we won't be warned, but there is anyway no actual check to perform at this stage as we do not yet know the NAND geometry. So, if the fields are empty, especially mtd->writesize which is *always* set quite rapidly after identification, let's skip the sanity checks. nand_change_read_column_op() is subject to be used early for ONFI/JEDEC identification in the very unlikely case of: - bitflips appearing in the parameter page, - the controller driver not supporting simple DATA_IN cycles. As nand_change_read_column_op() uses nand_fill_column_cycles() the logic explaind above also applies in this secondary helper. Fixes: c27842e7e11f ("mtd: rawnand: onfi: Adapt the parameter page read to constraint controllers") Fixes: daca31765e8b ("mtd: rawnand: jedec: Adapt the parameter page read to constraint controllers") Cc: stable@vger.kernel.org Reported-by: Alexander Dahl <ada@thorsis.com> Closes: https://lore.kernel.org/linux-mtd/20240306-shaky-bunion-d28b65ea97d7@thorsis.com/ Reported-by: Steven Seeger <steven.seeger@flightsystems.net> Closes: https://lore.kernel.org/linux-mtd/DM6PR05MB4506554457CF95191A670BDEF7062@DM6PR05MB4506.namprd05.prod.outlook.com/ Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/linux-mtd/20240516131320.579822-3-miquel.raynal@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-05mtd: spinand: macronix: Add support for serial NAND flashJaime Liao1-0/+112
commit c374839f9b4475173e536d1eaddff45cb481dbdf upstream. Macronix NAND Flash devices are available in different configurations and densities. MX"35" means SPI NAND MX35"LF"/"UF" , LF means 3V and UF meands 1.8V MX35LF"2G" , 2G means 2Gbits MX35LF2G"E4"/"24"/"14", E4 means internal ECC and Quad I/O(x4) 24 means 8-bit ecc requirement and Quad I/O(x4) 14 means 4-bit ecc requirement and Quad I/O(x4) MX35LF2G14AC is 3V 2Gbit serial NAND flash device (without on-die ECC) https://www.mxic.com.tw/Lists/Datasheet/Attachments/7926/MX35LF2G14AC,%203V,%202Gb,%20v1.1.pdf MX35UF4G24AD is 1.8V 4Gbit serial NAND flash device (without on-die ECC) https://www.mxic.com.tw/Lists/Datasheet/Attachments/7980/MX35UF4G24AD,%201.8V,%204Gb,%20v0.00.pdf MX35UF4GE4AD/MX35UF2GE4AD are 1.8V 4G/2Gbit serial NAND flash device with 8-bit on-die ECC https://www.mxic.com.tw/Lists/Datasheet/Attachments/7983/MX35UF4GE4AD,%201.8V,%204Gb,%20v0.00.pdf MX35UF2GE4AC/MX35UF1GE4AC are 1.8V 2G/1Gbit serial NAND flash device with 8-bit on-die ECC https://www.mxic.com.tw/Lists/Datasheet/Attachments/7974/MX35UF2GE4AC,%201.8V,%202Gb,%20v1.0.pdf MX35UF2G14AC/MX35UF1G14AC are 1.8V 2G/1Gbit serial NAND flash device (without on-die ECC) https://www.mxic.com.tw/Lists/Datasheet/Attachments/7931/MX35UF2G14AC,%201.8V,%202Gb,%20v1.1.pdf Validated via normal(default) and QUAD mode by read, erase, read back, on Xilinx Zynq PicoZed FPGA board which included Macronix SPI Host(drivers/spi/spi-mxic.c). Signed-off-by: Jaime Liao <jaimeliao@mxic.com.tw> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1621475108-22523-1-git-send-email-jaimeliao@mxic.com.tw Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-05mtd: partitions: redboot: Added conversion of operands to a larger typeDenis Arefev1-1/+1
[ Upstream commit 1162bc2f8f5de7da23d18aa4b7fbd4e93c369c50 ] The value of an arithmetic expression directory * master->erasesize is subject to overflow due to a failure to cast operands to a larger data type before perfroming arithmetic Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Denis Arefev <arefev@swemel.ru> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20240315093758.20790-1-arefev@swemel.ru Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-16mtd: rawnand: hynix: fixed typoMaxim Korotkov1-1/+1
[ Upstream commit 6819db94e1cd3ce24a432f3616cd563ed0c4eaba ] The function hynix_nand_rr_init() should probably return an error code. Judging by the usage, it seems that the return code is passed up the call stack. Right now, it always returns 0 and the function hynix_nand_cleanup() in hynix_nand_init() has never been called. Found by RASU JSC and Linux Verification Center (linuxtesting.org) Fixes: 626994e07480 ("mtd: nand: hynix: Add read-retry support for 1x nm MLC NANDs") Signed-off-by: Maxim Korotkov <korotkov.maxim.s@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20240313102721.1991299-1-korotkov.maxim.s@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-02mtd: diskonchip: work around ubsan link failureArnd Bergmann1-2/+2
commit 21c9fb611c25d5cd038f6fe485232e7884bb0b3d upstream. I ran into a randconfig build failure with UBSAN using gcc-13.2: arm-linux-gnueabi-ld: error: unplaced orphan section `.bss..Lubsan_data31' from `drivers/mtd/nand/raw/diskonchip.o' I'm not entirely sure what is going on here, but I suspect this has something to do with the check for the end of the doc_locations[] array that contains an (unsigned long)0xffffffff element, which is compared against the signed (int)0xffffffff. If this is the case, we should get a runtime check for undefined behavior, but we instead get an unexpected build-time error. I would have expected this to work fine on 32-bit architectures despite the signed integer overflow, though on 64-bit architectures this likely won't ever work. Changing the contition to instead check for the size of the array makes the code safe everywhere and avoids the ubsan check that leads to the link error. The loop code goes back to before 2.6.12. Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20240405143015.717429-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-13mtd: rawnand: meson: fix scrambling mode value in command macroArseniy Krasnov1-1/+1
[ Upstream commit ef6f463599e16924cdd02ce5056ab52879dc008c ] Scrambling mode is enabled by value (1 << 19). NFC_CMD_SCRAMBLER_ENABLE is already (1 << 19), so there is no need to shift it again in CMDRWGEN macro. Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Cc: <Stable@vger.kernel.org> Fixes: 8fae856c5350 ("mtd: rawnand: meson: add support for Amlogic NAND flash controller") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20240210214551.441610-1-avkrasnov@salutedevices.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-13ubi: correct the calculation of fastmap sizeZhang Yi1-3/+4
[ Upstream commit 7f174ae4f39e8475adcc09d26c5a43394689ad6c ] Now that the calculation of fastmap size in ubi_calc_fm_size() is incorrect since it miss each user volume's ubi_fm_eba structure and the Internal UBI volume info. Let's correct the calculation. Cc: stable@vger.kernel.org Signed-off-by: Zhang Yi <yi.zhang@huawei.com> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-13ubi: Check for too small LEB size in VTBL codeRichard Weinberger1-0/+6
[ Upstream commit 68a24aba7c593eafa8fd00f2f76407b9b32b47a9 ] If the LEB size is smaller than a volume table record we cannot have volumes. In this case abort attaching. Cc: Chenyuan Yang <cy54@illinois.edu> Cc: stable@vger.kernel.org Fixes: 801c135ce73d ("UBI: Unsorted Block Images") Reported-by: Chenyuan Yang <cy54@illinois.edu> Closes: https://lore.kernel.org/linux-mtd/1433EB7A-FC89-47D6-8F47-23BE41B263B3@illinois.edu/ Signed-off-by: Richard Weinberger <richard@nod.at> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-27mtd: rawnand: lpc32xx_mlc: fix irq handler prototypeArnd Bergmann1-2/+3
[ Upstream commit 347b828882e6334690e7003ce5e2fe5f233dc508 ] clang-16 warns about mismatched function prototypes: drivers/mtd/nand/raw/lpc32xx_mlc.c:783:29: error: cast from 'irqreturn_t (*)(int, struct lpc32xx_nand_host *)' (aka 'enum irqreturn (*)(int, struct lpc32xx_nand_host *)') to 'irq_handler_t' (aka 'enum irqreturn (*)(int, void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict] Change the interrupt handler to the normal way of just passing a void* pointer and converting it inside the function.. Fixes: 70f7cb78ec53 ("mtd: add LPC32xx MLC NAND driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20240213100146.455811-1-arnd@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-27mtd: maps: physmap-core: fix flash size larger than 32-bitBaruch Siach1-1/+1
[ Upstream commit 3884f03edd34887514a0865a80769cd5362d5c3b ] mtd-ram can potentially be larger than 4GB. get_bitmask_order() uses fls() that is not guaranteed to work with values larger than 32-bit. Specifically on aarch64 fls() returns 0 when all 32 LSB bits are clear. Use fls64() instead. Fixes: ba32ce95cbd987 ("mtd: maps: Merge gpio-addr-flash.c into physmap-core.c") Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/9fbf3664ce00f8b07867f1011834015f21d162a5.1707388458.git.baruch@tkos.co.il Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-06mtd: spinand: gigadevice: fix Quad IO for GD5F1GQ5UExxGChuanhong Guo1-1/+9
commit a4f9dd55c5e1bb951db6f1dee20e62e0103f3438 upstream. Read From Cache Quad IO (EBH) uses 2 dummy bytes on this chip according to page 23 of the datasheet[0]. [0]: https://www.gigadevice.com/datasheet/gd5f1gq5xexxg/ Fixes: 469b99248985 ("mtd: spinand: gigadevice: Support GD5F1GQ5UExxG") Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220320100001.247905-2-gch981213@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-06mtd: spinand: gigadevice: Fix the get ecc status issueHan Xu1-2/+4
[ Upstream commit 59950610c0c00c7a06d8a75d2ee5d73dba4274cf ] Some GigaDevice ecc_get_status functions use on-stack buffer for spi_mem_op causes spi_mem_check_op failing, fix the issue by using spinand scratchbuf. Fixes: c40c7a990a46 ("mtd: spinand: Add support for GigaDevice GD5F1GQ4UExxG") Signed-off-by: Han Xu <han.xu@nxp.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231108150701.593912-1-han.xu@nxp.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-06mtd: spinand: gigadevice: Support GD5F1GQ5UExxGReto Schneider1-9/+60
[ Upstream commit 469b992489852b500d39048aa0013639dfe9f2e6 ] The relevant changes to the already existing GD5F1GQ4UExxG support has been determined by consulting the GigaDevice product change notice AN-0392-10, version 1.0 from November 30, 2020. As the overlaps are huge, variable names have been generalized accordingly. Apart from the lowered ECC strength (4 instead of 8 bits per 512 bytes), the new device ID, and the extra quad IO dummy byte, no changes had to be taken into account. New hardware features are not supported, namely: - Power on reset - Unique ID - Double transfer rate (DTR) - Parameter page - Random data quad IO The inverted semantic of the "driver strength" register bits, defaulting to 100% instead of 50% for the Q5 devices, got ignored as the driver has never touched them anyway. The no longer supported "read from cache during block erase" functionality is not reflected as the current SPI NAND core does not support it anyway. Implementation has been tested on MediaTek MT7688 based GARDENA smart Gateways using both, GigaDevice GD5F1GQ5UEYIG and GD5F1GQ4UBYIG. Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210211113619.3502-1-code@reto-schneider.ch Stable-dep-of: 59950610c0c0 ("mtd: spinand: gigadevice: Fix the get ecc status issue") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-01mtd: spinand: macronix: Add support for MX35LFxGE4ADYouChing Lin1-0/+20
[ Upstream commit 5ece78de88739b4c68263e9f2582380c1fd8314f ] The Macronix MX35LF2GE4AD / MX35LF4GE4AD are 3V, 2G / 4Gbit serial SLC NAND flash device (with on-die ECC). Validated by read, erase, read back, write, read back and nandtest on Xilinx Zynq PicoZed FPGA board which included Macronix SPI Host (drivers/spi/spi-mxic.c). Signed-off-by: YouChing Lin <ycllin@mxic.com.tw> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1604561020-13499-1-git-send-email-ycllin@mxic.com.tw Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-26mtd: Fix gluebi NULL pointer dereference caused by ftl notifierZhaoLong Wang1-2/+2
[ Upstream commit a43bdc376deab5fff1ceb93dca55bcab8dbdc1d6 ] If both ftl.ko and gluebi.ko are loaded, the notifier of ftl triggers NULL pointer dereference when trying to access ‘gluebi->desc’ in gluebi_read(). ubi_gluebi_init ubi_register_volume_notifier ubi_enumerate_volumes ubi_notify_all gluebi_notify nb->notifier_call() gluebi_create mtd_device_register mtd_device_parse_register add_mtd_device blktrans_notify_add not->add() ftl_add_mtd tr->add_mtd() scan_header mtd_read mtd_read_oob mtd_read_oob_std gluebi_read mtd->read() gluebi->desc - NULL Detailed reproduction information available at the Link [1], In the normal case, obtain gluebi->desc in the gluebi_get_device(), and access gluebi->desc in the gluebi_read(). However, gluebi_get_device() is not executed in advance in the ftl_add_mtd() process, which leads to NULL pointer dereference. The solution for the gluebi module is to run jffs2 on the UBI volume without considering working with ftl or mtdblock [2]. Therefore, this problem can be avoided by preventing gluebi from creating the mtdblock device after creating mtd partition of the type MTD_UBIVOLUME. Fixes: 2ba3d76a1e29 ("UBI: make gluebi a separate module") Link: https://bugzilla.kernel.org/show_bug.cgi?id=217992 [1] Link: https://lore.kernel.org/lkml/441107100.23734.1697904580252.JavaMail.zimbra@nod.at/ [2] Signed-off-by: ZhaoLong Wang <wangzhaolong1@huawei.com> Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com> Acked-by: Richard Weinberger <richard@nod.at> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231220024619.2138625-1-wangzhaolong1@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-01-26mtd: rawnand: Increment IFC_TIMEOUT_MSECS for nand controller responseRonald Monthero1-1/+1
[ Upstream commit 923fb6238cb3ac529aa2bf13b3b1e53762186a8b ] Under heavy load it is likely that the controller is done with its own task but the thread unlocking the wait is not scheduled in time. Increasing IFC_TIMEOUT_MSECS allows the controller to respond within allowable timeslice of 1 sec. fsl,ifc-nand 7e800000.nand: Controller is not responding [<804b2047>] (nand_get_device) from [<804b5335>] (nand_write_oob+0x1b/0x4a) [<804b5335>] (nand_write_oob) from [<804a3585>] (mtd_write+0x41/0x5c) [<804a3585>] (mtd_write) from [<804c1d47>] (ubi_io_write+0x17f/0x22c) [<804c1d47>] (ubi_io_write) from [<804c047b>] (ubi_eba_write_leb+0x5b/0x1d0) Fixes: 82771882d960 ("NAND Machine support for Integrated Flash Controller") Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Ronald Monthero <debug.penguin32@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231118083156.776887-1-debug.penguin32@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28mtd: cfi_cmdset_0001: Byte swap OTP infoLinus Walleij1-2/+18
commit 565fe150624ee77dc63a735cc1b3bff5101f38a3 upstream. Currently the offset into the device when looking for OTP bits can go outside of the address of the MTD NOR devices, and if that memory isn't readable, bad things happen on the IXP4xx (added prints that illustrate the problem before the crash): cfi_intelext_otp_walk walk OTP on chip 0 start at reg_prot_offset 0x00000100 ixp4xx_copy_from copy from 0x00000100 to 0xc880dd78 cfi_intelext_otp_walk walk OTP on chip 0 start at reg_prot_offset 0x12000000 ixp4xx_copy_from copy from 0x12000000 to 0xc880dd78 8<--- cut here --- Unable to handle kernel paging request at virtual address db000000 [db000000] *pgd=00000000 (...) This happens in this case because the IXP4xx is big endian and the 32- and 16-bit fields in the struct cfi_intelext_otpinfo are not properly byteswapped. Compare to how the code in read_pri_intelext() byteswaps the fields in struct cfi_pri_intelext. Adding a small byte swapping loop for the OTP in read_pri_intelext() and the crash goes away. The problem went unnoticed for many years until I enabled CONFIG_MTD_OTP on the IXP4xx as well, triggering the bug. Cc: stable@vger.kernel.org Reviewed-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231020-mtd-otp-byteswap-v4-1-0d132c06aa9d@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-25mtd: physmap-core: Restore map_rom fallbackGeert Uytterhoeven1-0/+11
commit 6792b7fce610bcd1cf3e07af3607fe7e2c38c1d8 upstream. When the exact mapping type driver was not available, the old physmap_of_core driver fell back to mapping the region as ROM. Unfortunately this feature was lost when the DT and pdata cases were merged. Revive this useful feature. Fixes: 642b1e8dbed7bbbf ("mtd: maps: Merge physmap_of.c into physmap-core.c") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/550e8c8c1da4c4baeb3d71ff79b14a18d4194f9e.1693407371.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-25mtd: spinand: micron: correct bitmask for ecc statusMartin Kurbanov1-1/+1
commit 9836a987860e33943945d4b257729a4f94eae576 upstream. Valid bitmask is 0x70 in the status register. Fixes: a508e8875e13 ("mtd: spinand: Add initial support for Micron MT29F2G01ABAGD") Signed-off-by: Martin Kurbanov <mmkurbanov@sberdevices.ru> Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230905145637.139068-1-mmkurbanov@sberdevices.ru Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-25mtd: rawnand: arasan: Ensure program page operations are successfulMiquel Raynal1-2/+14
commit 3a4a893dbb19e229db3b753f0462520b561dee98 upstream. The NAND core complies with the ONFI specification, which itself mentions that after any program or erase operation, a status check should be performed to see whether the operation was finished *and* successful. The NAND core offers helpers to finish a page write (sending the "PAGE PROG" command, waiting for the NAND chip to be ready again, and checking the operation status). But in some cases, advanced controller drivers might want to optimize this and craft their own page write helper to leverage additional hardware capabilities, thus not always using the core facilities. Some drivers, like this one, do not use the core helper to finish a page write because the final cycles are automatically managed by the hardware. In this case, the additional care must be taken to manually perform the final status check. Let's read the NAND chip status at the end of the page write helper and return -EIO upon error. Cc: Michal Simek <michal.simek@amd.com> Cc: stable@vger.kernel.org Fixes: 88ffef1b65cf ("mtd: rawnand: arasan: Support the hardware BCH ECC engine") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/linux-mtd/20230717194221.229778-2-miquel.raynal@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-25mtd: rawnand: marvell: Ensure program page operations are successfulMiquel Raynal1-1/+22
commit 3e01d5254698ea3d18e09d96b974c762328352cd upstream. The NAND core complies with the ONFI specification, which itself mentions that after any program or erase operation, a status check should be performed to see whether the operation was finished *and* successful. The NAND core offers helpers to finish a page write (sending the "PAGE PROG" command, waiting for the NAND chip to be ready again, and checking the operation status). But in some cases, advanced controller drivers might want to optimize this and craft their own page write helper to leverage additional hardware capabilities, thus not always using the core facilities. Some drivers, like this one, do not use the core helper to finish a page write because the final cycles are automatically managed by the hardware. In this case, the additional care must be taken to manually perform the final status check. Let's read the NAND chip status at the end of the page write helper and return -EIO upon error. Cc: stable@vger.kernel.org Fixes: 02f26ecf8c77 ("mtd: nand: add reworked Marvell NAND controller driver") Reported-by: Aviram Dali <aviramd@marvell.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Ravi Chandra Minnikanti <rminnikanti@marvell.com> Link: https://lore.kernel.org/linux-mtd/20230717194221.229778-1-miquel.raynal@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-25mtd: rawnand: qcom: Unmap the right resource upon probe failureBibek Kumar Patro1-1/+1
commit 5279f4a9eed3ee7d222b76511ea7a22c89e7eefd upstream. We currently provide the physical address of the DMA region rather than the output of dma_map_resource() which is obviously wrong. Fixes: 7330fc505af4 ("mtd: rawnand: qcom: stop using phys_to_dma()") Cc: stable@vger.kernel.org Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Bibek Kumar Patro <quic_bibekkum@quicinc.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230913070702.12707-1-quic_bibekkum@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-10ubi: Refuse attaching if mtd's erasesize is 0Zhihao Cheng1-0/+7
[ Upstream commit 017c73a34a661a861712f7cc1393a123e5b2208c ] There exists mtd devices with zero erasesize, which will trigger a divide-by-zero exception while attaching ubi device. Fix it by refusing attaching if mtd's erasesize is 0. Fixes: 801c135ce73d ("UBI: Unsorted Block Images") Reported-by: Yu Hao <yhao016@ucr.edu> Link: https://lore.kernel.org/lkml/977347543.226888.1682011999468.JavaMail.zimbra@nod.at/T/ Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23mtd: rawnand: brcmnand: Fix ECC level field setting for v7.2 controllerWilliam Zhang1-33/+41
[ Upstream commit 2ec2839a9062db8a592525a3fdabd42dcd9a3a9b ] v7.2 controller has different ECC level field size and shift in the acc control register than its predecessor and successor controller. It needs to be set specifically. Fixes: decba6d47869 ("mtd: brcmnand: Add v7.2 controller support") Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230706182909.79151-2-william.zhang@broadcom.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-09-23mtd: rawnand: brcmnand: Allow SoC to provide I/O operationsFlorian Fainelli2-2/+55
[ Upstream commit 25f97138f8c225dbf365b428a94d7b30a6daefb3 ] Allow a brcmnand_soc instance to provide a custom set of I/O operations which we will require when using this driver on a BCMA bus which is not directly memory mapped I/O. Update the nand_{read,write}_reg accordingly to use the SoC operations if provided. To minimize the penalty on other SoCs which do support standard MMIO accesses, we use a static key which is disabled by default and gets enabled if a soc implementation does provide I/O operations. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220107184614.2670254-3-f.fainelli@gmail.com Stable-dep-of: 2ec2839a9062 ("mtd: rawnand: brcmnand: Fix ECC level field setting for v7.2 controller") Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-22 00:34:12 +0300