summaryrefslogtreecommitdiff
path: root/drivers/mtd
AgeCommit message (Collapse)AuthorFilesLines
2020-11-10ubi: check kthread_should_stop() after the setting of task stateZhihao Cheng1-0/+13
commit d005f8c6588efcfbe88099b6edafc6f58c84a9c1 upstream. A detach hung is possible when a race occurs between the detach process and the ubi background thread. The following sequences outline the race: ubi thread: if (list_empty(&ubi->works)... ubi detach: set_bit(KTHREAD_SHOULD_STOP, &kthread->flags) => by kthread_stop() wake_up_process() => ubi thread is still running, so 0 is returned ubi thread: set_current_state(TASK_INTERRUPTIBLE) schedule() => ubi thread will never be scheduled again ubi detach: wait_for_completion() => hung task! To fix that, we need to check kthread_should_stop() after we set the task state, so the ubi thread will either see the stop bit and exit or the task state is reset to runnable such that it isn't scheduled out indefinitely. Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Cc: <stable@vger.kernel.org> Fixes: 801c135ce73d5df1ca ("UBI: Unsorted Block Images") Reported-by: syzbot+853639d0cb16c31c7a14@syzkaller.appspotmail.com Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-29mtd: mtdoops: Don't write panic data twiceMark Tomlinson1-5/+6
[ Upstream commit c1cf1d57d1492235309111ea6a900940213a9166 ] If calling mtdoops_write, don't also schedule work to be done later. Although this appears to not be causing an issue, possibly because the scheduled work will never get done, it is confusing. Fixes: 016c1291ce70 ("mtd: mtdoops: do not use mtd->panic_write directly") Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200903034217.23079-1-mark.tomlinson@alliedtelesis.co.nz Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-29mtd: lpddr: fix excessive stack usage with clangArnd Bergmann1-16/+19
[ Upstream commit 3e1b6469f8324bee5927b063e2aca30d3e56b907 ] Building lpddr2_nvm with clang can result in a giant stack usage in one function: drivers/mtd/lpddr/lpddr2_nvm.c:399:12: error: stack frame size of 1144 bytes in function 'lpddr2_nvm_probe' [-Werror,-Wframe-larger-than=] The problem is that clang decides to build a copy of the mtd_info structure on the stack and then do a memcpy() into the actual version. It shouldn't really do it that way, but it's not strictly a bug either. As a workaround, use a static const version of the structure to assign most of the members upfront and then only set the few members that require runtime knowledge at probe time. Fixes: 96ba9dd65788 ("mtd: lpddr: add driver for LPDDR2-NVM PCM memories") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200505140136.263461-1-arnd@arndb.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-14mtd: rawnand: sunxi: Fix the probe error pathMiquel Raynal1-1/+1
commit 3d84515ffd8fb657e10fa5b1215e9f095fa7efca upstream. nand_release() is supposed be called after MTD device registration. Here, only nand_scan() happened, so use nand_cleanup() instead. Fixes: 1fef62c1423b ("mtd: nand: add sunxi NAND flash controller support") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-54-miquel.raynal@bootlin.com [iwamatsu: adjust filename] Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01mtd: parser: cmdline: Support MTD names containing one or more colonsBoris Brezillon1-3/+20
[ Upstream commit eb13fa0227417e84aecc3bd9c029d376e33474d3 ] Looks like some drivers define MTD names with a colon in it, thus making mtdpart= parsing impossible. Let's fix the parser to gracefully handle that case: the last ':' in a partition definition sequence is considered instead of the first one. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Ron Minnich <rminnich@google.com> Tested-by: Ron Minnich <rminnich@google.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01mtd: rawnand: omap_elm: Fix runtime PM imbalance on errorDinghao Liu1-0/+1
[ Upstream commit 37f7212148cf1d796135cdf8d0c7fee13067674b ] pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced. Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200522104008.28340-1-dinghao.liu@zju.edu.cn Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01mtd: cfi_cmdset_0002: don't free cfi->cfiq in error path of cfi_amdstd_setup()Hou Tao1-1/+0
[ Upstream commit 03976af89e3bd9489d542582a325892e6a8cacc0 ] Else there may be a double-free problem, because cfi->cfiq will be freed by mtd_do_chip_probe() if both the two invocations of check_cmd_set() return failure. Signed-off-by: Hou Tao <houtao1@huawei.com> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21mtd: properly check all write ioctls for permissionsGreg Kroah-Hartman1-9/+47
commit f7e6b19bc76471ba03725fe58e0c218a3d6266c3 upstream. When doing a "write" ioctl call, properly check that we have permissions to do so before copying anything from userspace or anything else so we can "fail fast". This includes also covering the MEMWRITE ioctl which previously missed checking for this. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [rw: Fixed locking issue] Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-22mtd: rawnand: brcmnand: fix CS0 layoutÁlvaro Fernández Rojas1-2/+3
commit 3d3fb3c5be9ce07fa85d8f67fb3922e4613b955b upstream. Only v3.3-v5.0 have a different CS0 layout. Controllers before v3.3 use the same layout for every CS. Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200522121524.4161539-3-noltari@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-30mtd: rawnand: tmio: Fix the probe error pathMiquel Raynal1-1/+1
[ Upstream commit 75e9a330a9bd48f97a55a08000236084fe3dae56 ] nand_release() is supposed be called after MTD device registration. Here, only nand_scan() happened, so use nand_cleanup() instead. There is no real Fixes tag applying here as the use of nand_release() in this driver predates by far the introduction of nand_cleanup() in commit d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources") which makes this change possible. However, pointing this commit as the culprit for backporting purposes makes sense even if this commit is not introducing any bug. Fixes: d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-57-miquel.raynal@bootlin.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-30mtd: rawnand: mtk: Fix the probe error pathMiquel Raynal1-1/+1
[ Upstream commit 8a82bbcadec877f5f938c54026278dfc1f05a332 ] nand_release() is supposed be called after MTD device registration. Here, only nand_scan() happened, so use nand_cleanup() instead. There is no real Fixes tag applying here as the use of nand_release() in this driver predates the introduction of nand_cleanup() in commit d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources") which makes this change possible. However, pointing this commit as the culprit for backporting purposes makes sense even if this commit is not introducing any bug. Fixes: d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-28-miquel.raynal@bootlin.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-30mtd: rawnand: plat_nand: Fix the probe error pathMiquel Raynal1-1/+1
[ Upstream commit 5284024b4dac5e94f7f374ca905c7580dbc455e9 ] nand_release() is supposed be called after MTD device registration. Here, only nand_scan() happened, so use nand_cleanup() instead. There is no real Fixes tag applying here as the use of nand_release() in this driver predates by far the introduction of nand_cleanup() in commit d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources") which makes this change possible, hence pointing it as the commit to fix for backporting purposes, even if this commit is not introducing any bug. Fixes: d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-43-miquel.raynal@bootlin.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-30mtd: rawnand: socrates: Fix the probe error pathMiquel Raynal1-1/+1
[ Upstream commit 9c6c2e5cc77119ce0dacb4f9feedb73ce0354421 ] nand_release() is supposed be called after MTD device registration. Here, only nand_scan() happened, so use nand_cleanup() instead. There is no real Fixes tag applying here as the use of nand_release() in this driver predates by far the introduction of nand_cleanup() in commit d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources") which makes this change possible. However, pointing this commit as the culprit for backporting purposes makes sense even if this commit is not introducing any bug. Fixes: d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-51-miquel.raynal@bootlin.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-30mtd: rawnand: orion: Fix the probe error pathMiquel Raynal1-1/+1
[ Upstream commit be238fbf78e4c7c586dac235ab967d3e565a4d1a ] nand_release() is supposed be called after MTD device registration. Here, only nand_scan() happened, so use nand_cleanup() instead. There is no real Fixes tag applying here as the use of nand_release() in this driver predates by far the introduction of nand_cleanup() in commit d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources") which makes this change possible. However, pointing this commit as the culprit for backporting purposes makes sense even if this commit is not introducing any bug. Fixes: d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-34-miquel.raynal@bootlin.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-30mtd: rawnand: xway: Fix the probe error pathMiquel Raynal1-1/+1
[ Upstream commit 34531be5e804a8e1abf314a6c3a19fe342e4a154 ] nand_release() is supposed be called after MTD device registration. Here, only nand_scan() happened, so use nand_cleanup() instead. There is no real Fixes tag applying here as the use of nand_release() in this driver predates the introduction of nand_cleanup() in commit d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources") which makes this change possible. However, pointing this commit as the culprit for backporting purposes makes sense even if this commit is not introducing any bug. Fixes: d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-61-miquel.raynal@bootlin.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-30mtd: rawnand: sharpsl: Fix the probe error pathMiquel Raynal1-1/+1
[ Upstream commit 0f44b3275b3798ccb97a2f51ac85871c30d6fbbc ] nand_release() is supposed be called after MTD device registration. Here, only nand_scan() happened, so use nand_cleanup() instead. There is no Fixes tag applying here as the use of nand_release() in this driver predates by far the introduction of nand_cleanup() in commit d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources") which makes this change possible. However, pointing this commit as the culprit for backporting purposes makes sense. Fixes: d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-49-miquel.raynal@bootlin.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-30mtd: rawnand: diskonchip: Fix the probe error pathMiquel Raynal1-5/+2
[ Upstream commit c5be12e45940f1aa1b5dfa04db5d15ad24f7c896 ] Not sure nand_cleanup() is the right function to call here but in any case it is not nand_release(). Indeed, even a comment says that calling nand_release() is a bit of a hack as there is no MTD device to unregister. So switch to nand_cleanup() for now and drop this comment. There is no Fixes tag applying here as the use of nand_release() in this driver predates by far the introduction of nand_cleanup() in commit d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources") which makes this change possible. However, pointing this commit as the culprit for backporting purposes makes sense even if it did not intruce any bug. Fixes: d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-13-miquel.raynal@bootlin.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-30mtd: rawnand: Pass a nand_chip object to nand_release()Boris Brezillon47-73/+68
[ Upstream commit 59ac276f22270fb2094910f9a734c17f41c25e70 ] Let's make the raw NAND API consistent by patching all helpers to take a nand_chip object instead of an mtd_info one. Now is nand_release()'s turn. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-20mtd: rawnand: pasemi: Fix the probe error pathMiquel Raynal1-1/+3
commit f51466901c07e6930435d30b02a21f0841174f61 upstream. nand_cleanup() is supposed to be called on error after a successful call to nand_scan() to free all NAND resources. There is no real Fixes tag applying here as the use of nand_release() in this driver predates by far the introduction of nand_cleanup() in commit d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources") which makes this change possible, hence pointing it as the commit to fix for backporting purposes, even if this commit is not introducing any bug. Fixes: d44154f969a4 ("mtd: nand: Provide nand_cleanup() function to free NAND related resources") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-41-miquel.raynal@bootlin.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-20mtd: rawnand: brcmnand: fix hamming oob layoutÁlvaro Fernández Rojas1-4/+7
commit 130bbde4809b011faf64f99dddc14b4b01f440c3 upstream. First 2 bytes are used in large-page nand. Fixes: ef5eeea6e911 ("mtd: nand: brcm: switch to mtd_ooblayout_ops") Cc: stable@vger.kernel.org Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200512075733.745374-2-noltari@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-02mtd: cfi: fix deadloop in cfi_cmdset_0002.c do_write_bufferLiu Jian1-1/+5
commit d9b8a67b3b95a5c5aae6422b8113adc1c2485f2b upstream. In function do_write_buffer(), in the for loop, there is a case chip_ready() returns 1 while chip_good() returns 0, so it never break the loop. To fix this, chip_good() is enough and it should timeout if it stay bad for a while. Fixes: dfeae1073583("mtd: cfi_cmdset_0002: Change write buffer to check correct value") Signed-off-by: Yi Huaijie <yihuaijie@huawei.com> Signed-off-by: Liu Jian <liujian56@huawei.com> Reviewed-by: Tokunori Ikegami <ikegami_to@yahoo.co.jp> Signed-off-by: Richard Weinberger <richard@nod.at> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24mtd: phram: fix a double free issue in error pathWen Yang1-6/+9
commit 49c64df880570034308e4a9a49c4bc95cf8cdb33 upstream. The variable 'name' is released multiple times in the error path, which may cause double free issues. This problem is avoided by adding a goto label to release the memory uniformly. And this change also makes the code a bit more cleaner. Fixes: 4f678a58d335 ("mtd: fix memory leaks in phram_setup") Signed-off-by: Wen Yang <wenyang@linux.alibaba.com> Cc: Joern Engel <joern@lazybastard.org> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: linux-mtd@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200318153156.25612-1-wenyang@linux.alibaba.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-24mtd: lpddr: Fix a double free in probe()Dan Carpenter1-1/+0
commit 4da0ea71ea934af18db4c63396ba2af1a679ef02 upstream. This function is only called from lpddr_probe(). We free "lpddr" both here and in the caller, so it's a double free. The best place to free "lpddr" is in lpddr_probe() so let's delete this one. Fixes: 8dc004395d5e ("[MTD] LPDDR qinfo probing.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200228092554.o57igp3nqhyvf66t@kili.mountain Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-15ubi: Fix an error pointer dereference in error handling codeDan Carpenter1-9/+12
commit 5d3805af279c93ef49a64701f35254676d709622 upstream. If "seen_pebs = init_seen(ubi);" fails then "seen_pebs" is an error pointer and we try to kfree() it which results in an Oops. This patch re-arranges the error handling so now it only frees things which have been allocated successfully. Fixes: daef3dd1f0ae ("UBI: Fastmap: Add self check to detect absent PEBs") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-15ubi: fastmap: Fix inverted logic in seen selfcheckSascha Hauer1-1/+1
commit ef5aafb6e4e9942a28cd300bdcda21ce6cbaf045 upstream. set_seen() sets the bit corresponding to the PEB number in the bitmap, so when self_check_seen() wants to find PEBs that haven't been seen we have to print the PEBs that have their bit cleared, not the ones which have it set. Fixes: 5d71afb00840 ("ubi: Use bitmaps in Fastmap self-check code") Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-23mtd: spi-nor: fix silent truncation in spi_nor_read()Sergei Shtylyov1-1/+1
commit a719a75a7761e4139dd099330d9fe3589d844f9b upstream. spi_nor_read() assigns the result of 'ssize_t spi_nor_read_data()' to the 'int ret' variable, while 'ssize_t' is a 64-bit type and *int* is a 32-bit type on the 64-bit machines. This silent truncation isn't really valid, so fix up the variable's type. Fixes: 59451e1233bd ("mtd: spi-nor: change return value of read/write") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-21mtd: spear_smi: Fix Write Burst modeMiquel Raynal1-1/+37
commit 69c7f4618c16b4678f8a4949b6bb5ace259c0033 upstream. Any write with either dd or flashcp to a device driven by the spear_smi.c driver will pass through the spear_smi_cpy_toio() function. This function will get called for chunks of up to 256 bytes. If the amount of data is smaller, we may have a problem if the data length is not 4-byte aligned. In this situation, the kernel panics during the memcpy: # dd if=/dev/urandom bs=1001 count=1 of=/dev/mtd6 spear_smi_cpy_toio [620] dest c9070000, src c7be8800, len 256 spear_smi_cpy_toio [620] dest c9070100, src c7be8900, len 256 spear_smi_cpy_toio [620] dest c9070200, src c7be8a00, len 256 spear_smi_cpy_toio [620] dest c9070300, src c7be8b00, len 233 Unhandled fault: external abort on non-linefetch (0x808) at 0xc90703e8 [...] PC is at memcpy+0xcc/0x330 The above error occurs because the implementation of memcpy_toio() tries to optimize the number of I/O by writing 4 bytes at a time as much as possible, until there are less than 4 bytes left and then switches to word or byte writes. Unfortunately, the specification states about the Write Burst mode: "the next AHB Write request should point to the next incremented address and should have the same size (byte, half-word or word)" This means ARM architecture implementation of memcpy_toio() cannot reliably be used blindly here. Workaround this situation by update the write path to stick to byte access when the burst length is not multiple of 4. Fixes: f18dbbb1bfe0 ("mtd: ST SPEAr: Add SMI driver for serial NOR flash") Cc: Russell King <linux@armlinux.org.uk> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-05mtd: Remove a debug trace in mtdpart.cBoris Brezillon1-1/+0
[ Upstream commit bda2ab56356b9acdfab150f31c4bac9846253092 ] Commit 2b6f0090a333 ("mtd: Check add_mtd_device() ret code") contained a leftover of the debug session that led to this bug fix. Remove this pr_info(). Fixes: 2b6f0090a333 ("mtd: Check add_mtd_device() ret code") Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05mtd: Check add_mtd_device() ret codeBoris Brezillon2-6/+32
[ Upstream commit 2b6f0090a3335b7bdd03ca520c35591159463041 ] add_mtd_device() can fail. We should always check its return value and gracefully handle the failure case. Fix the call sites where this not done (in mtdpart.c) and add a __must_check attribute to the prototype to avoid this kind of mistakes. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05mtd: rawnand: sunxi: Write pageprog related opcodes to WCMD_SETBoris Brezillon1-1/+1
[ Upstream commit 732774437ae01d9882e60314e303898e63c7f038 ] The opcodes used by the controller when doing batched page prog should be written in NFC_REG_WCMD_SET not FC_REG_RCMD_SET. Luckily, the default NFC_REG_WCMD_SET value matches the one we set in the driver which explains why we didn't notice the problem. Fixes: 614049a8d904 ("mtd: nand: sunxi: add support for DMA assisted operations") Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05ubi: Do not drop UBI device reference before usingPan Bian1-1/+1
[ Upstream commit e542087701f09418702673631a908429feb3eae0 ] The UBI device reference is dropped but then the device is used as a parameter of ubi_err. The bug is introduced in changing ubi_err's behavior. The old ubi_err does not require a UBI device as its first parameter, but the new one does. Fixes: 32608703310 ("UBI: Extend UBI layer debug/messaging capabilities") Signed-off-by: Pan Bian <bianpan2016@163.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05ubi: Put MTD device after it is not usedPan Bian1-1/+1
[ Upstream commit b95f83ab762dd6211351b9140f99f43644076ca8 ] The MTD device reference is dropped via put_mtd_device, however its field ->index is read and passed to ubi_msg. To fix this, the patch moves the reference dropping after calling ubi_msg. Signed-off-by: Pan Bian <bianpan2016@163.com> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-25mtd: physmap_of: Release resources on errorRicardo Ribalda Delgado1-22/+5
[ Upstream commit ef0de747f7ad179c7698a5b0e28db05f18ecbf57 ] During probe, if there was an error the memory region and the memory map were not properly released.This can lead a system unusable if deferred probe is in use. Replace mem_request and map with devm_ioremap_resource Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-25mtd: rawnand: sh_flctl: Use proper enum for flctl_dma_fifo0_transferNathan Chancellor1-2/+2
[ Upstream commit e2bfa4ca23d9b5a7bdfcf21319fad9b59e38a05c ] Clang warns when one enumerated type is converted implicitly to another: drivers/mtd/nand/raw/sh_flctl.c:483:46: warning: implicit conversion from enumeration type 'enum dma_transfer_direction' to different enumeration type 'enum dma_data_direction' [-Wenum-conversion] flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_DEV_TO_MEM) > 0) ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~ drivers/mtd/nand/raw/sh_flctl.c:542:46: warning: implicit conversion from enumeration type 'enum dma_transfer_direction' to different enumeration type 'enum dma_data_direction' [-Wenum-conversion] flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_MEM_TO_DEV) > 0) ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~ 2 warnings generated. Use the proper enums from dma_data_direction to satisfy Clang. DMA_MEM_TO_DEV = DMA_TO_DEVICE = 1 DMA_DEV_TO_MEM = DMA_FROM_DEVICE = 2 Reported-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-10-05mtd: cfi_cmdset_0002: Use chip_good() to retry in do_write_oneword()Tokunori Ikegami1-6/+12
commit 37c673ade35c707d50583b5b25091ff8ebdeafd7 upstream. As reported by the OpenWRT team, write requests sometimes fail on some platforms. Currently to check the state chip_ready() is used correctly as described by the flash memory S29GL256P11TFI01 datasheet. Also chip_good() is used to check if the write is succeeded and it was implemented by the commit fb4a90bfcd6d8 ("[MTD] CFI-0002 - Improve error checking"). But actually the write failure is caused on some platforms and also it can be fixed by using chip_good() to check the state and retry instead. Also it seems that it is caused after repeated about 1,000 times to retry the write one word with the reset command. By using chip_good() to check the state to be done it can be reduced the retry with reset. It is depended on the actual flash chip behavior so the root cause is unknown. Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Cc: linux-mtd@lists.infradead.org Cc: stable@vger.kernel.org Reported-by: Fabio Bettoni <fbettoni@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com> [vigneshr@ti.com: Fix a checkpatch warning] Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-21mtd: rawnand: mtk: Fix wrongly assigned OOB buffer pointer issueXiaolei Li1-11/+10
commit 336d4b138be2dad372b67a2388e42805c48aaa38 upstream. One main goal of the function mtk_nfc_update_ecc_stats is to check whether sectors are all empty. If they are empty, set these sectors's data buffer and OOB buffer as 0xff. But now, the sector OOB buffer pointer is wrongly assigned. We always do memset from sector 0. To fix this issue, pass start sector number to make OOB buffer pointer be properly assigned. Fixes: 1d6b1e464950 ("mtd: mediatek: driver for MTK Smart Device") Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-15mtd: rawnand: gpmi: fix MX28 bus master lockup problemMartin Kepplinger1-8/+7
commit d5d27fd9826b59979b184ec288e4812abac0e988 upstream. Disable BCH soft reset according to MX23 erratum #2847 ("BCH soft reset may cause bus master lock up") for MX28 too. It has the same problem. Observed problem: once per 100,000+ MX28 reboots NAND read failed on DMA timeout errors: [ 1.770823] UBI: attaching mtd3 to ubi0 [ 2.768088] gpmi_nand: DMA timeout, last DMA :1 [ 3.958087] gpmi_nand: BCH timeout, last DMA :1 [ 4.156033] gpmi_nand: Error in ECC-based read: -110 [ 4.161136] UBI warning: ubi_io_read: error -110 while reading 64 bytes from PEB 0:0, read only 0 bytes, retry [ 4.171283] step 1 error [ 4.173846] gpmi_nand: Chip: 0, Error -1 Without BCH soft reset we successfully executed 1,000,000 MX28 reboots. I have a quote from NXP regarding this problem, from July 18th 2016: "As the i.MX23 and i.MX28 are of the same generation, they share many characteristics. Unfortunately, also the erratas may be shared. In case of the documented erratas and the workarounds, you can also apply the workaround solution of one device on the other one. This have been reported, but I’m afraid that there are not an estimated date for updating the Errata documents. Please accept our apologies for any inconveniences this may cause." Fixes: 6f2a6a52560a ("mtd: nand: gpmi: reset BCH earlier, too, to avoid NAND startup problems") Cc: stable@vger.kernel.org Signed-off-by: Manfred Schlaegl <manfred.schlaegl@ginzinger.com> Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Acked-by: Han Xu <han.xu@nxp.com> Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-09mtd: atmel-quadspi: disallow building on ebsa110Arnd Bergmann1-1/+1
commit 2a9d92fb3a1282a4659f1bb6d5684018846537b7 upstream. I ran into a link-time error with the atmel-quadspi driver on the EBSA110 platform: drivers/mtd/built-in.o: In function `atmel_qspi_run_command': :(.text+0x1ee3c): undefined reference to `_memcpy_toio' :(.text+0x1ee48): undefined reference to `_memcpy_fromio' The problem is that _memcpy_toio/_memcpy_fromio are not available on that platform, and we have to prevent building the driver there. In case we want to backport this to older kernels: between linux-4.8 and linux-4.20, the Kconfig entry was in drivers/mtd/spi-nor/Kconfig but had the same problem. Link: https://lore.kernel.org/patchwork/patch/812860/ Fixes: 161aaab8a067 ("mtd: atmel-quadspi: add driver for Atmel QSPI controller") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-13mtd: rawnand: qcom: Namespace prefix some commandsOlof Johansson1-16/+16
[ Upstream commit 33bf5519ae5dd356b182a94e3622f42860274a38 ] PAGE_READ is used by RISC-V arch code included through mm headers, and it makes sense to bring in a prefix on these in the driver. drivers/mtd/nand/raw/qcom_nandc.c:153: warning: "PAGE_READ" redefined #define PAGE_READ 0x2 In file included from include/linux/memremap.h:7, from include/linux/mm.h:27, from include/linux/scatterlist.h:8, from include/linux/dma-mapping.h:11, from drivers/mtd/nand/raw/qcom_nandc.c:17: arch/riscv/include/asm/pgtable.h:48: note: this is the location of the previous definition Caught by riscv allmodconfig. Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-11-21mtd: docg3: don't set conflicting BCH_CONST_PARAMS optionArnd Bergmann1-1/+1
commit be2e1c9dcf76886a83fb1c433a316e26d4ca2550 upstream. I noticed during the creation of another bugfix that the BCH_CONST_PARAMS option that is set by DOCG3 breaks setting variable parameters for any other users of the BCH library code. The only other user we have today is the MTD_NAND software BCH implementation (most flash controllers use hardware BCH these days and are not affected). I considered removing BCH_CONST_PARAMS entirely because of the inherent conflict, but according to the description in lib/bch.c there is a significant performance benefit in keeping it. To avoid the immediate problem of the conflict between MTD_NAND_BCH and DOCG3, this only sets the constant parameters if MTD_NAND_BCH is disabled, which should fix the problem for all cases that are affected. This should also work for all stable kernels. Note that there is only one machine that actually seems to use the DOCG3 driver (arch/arm/mach-pxa/mioa701.c), so most users should have the driver disabled, but it almost certainly shows up if we wanted to test random kernels on machines that use software BCH in MTD. Fixes: d13d19ece39f ("mtd: docg3: add ECC correction code") Cc: stable@vger.kernel.org Cc: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-10mtd: spi-nor: Add support for is25wp series chipsKimmo Rautkoski1-0/+6
[ Upstream commit d616f81cdd2a21edfa90a595a4e9b143f5ba8414 ] Added support for is25wp032, is25wp064 and is25wp128. Signed-off-by: Kimmo Rautkoski <ext-kimmo.rautkoski@vaisala.com> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> [ Adrian Bunk: Trivial adaption to changed context. ] Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2018-09-26mtdchar: fix overflows in adjustment of `count`Jann Horn1-3/+7
[ Upstream commit 6c6bc9ea84d0008024606bf5ba10519e20d851bf ] The first checks in mtdchar_read() and mtdchar_write() attempt to limit `count` such that `*ppos + count <= mtd->size`. However, they ignore the possibility of `*ppos > mtd->size`, allowing the calculation of `count` to wrap around. `mtdchar_lseek()` prevents seeking beyond mtd->size, but the pread/pwrite syscalls bypass this. I haven't found any codepath on which this actually causes dangerous behavior, but it seems like a sensible change anyway. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26mtd/maps: fix solutionengine.c printk format warningsRandy Dunlap1-3/+3
[ Upstream commit 1d25e3eeed1d987404e2d2e451eebac8c15cecc1 ] Fix 2 printk format warnings (this driver is currently only used by arch/sh/) by using "%pap" instead of "%lx". Fixes these build warnings: ../drivers/mtd/maps/solutionengine.c: In function 'init_soleng_maps': ../include/linux/kern_levels.h:5:18: warning: format '%lx' expects argument of type 'long unsigned int', but argument 2 has type 'resource_size_t' {aka 'unsigned int'} [-Wformat=] ../drivers/mtd/maps/solutionengine.c:62:54: note: format string is defined here printk(KERN_NOTICE "Solution Engine: Flash at 0x%08lx, EPROM at 0x%08lx\n", ~~~~^ %08x ../include/linux/kern_levels.h:5:18: warning: format '%lx' expects argument of type 'long unsigned int', but argument 3 has type 'resource_size_t' {aka 'unsigned int'} [-Wformat=] ../drivers/mtd/maps/solutionengine.c:62:72: note: format string is defined here printk(KERN_NOTICE "Solution Engine: Flash at 0x%08lx, EPROM at 0x%08lx\n", ~~~~^ %08x Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Boris Brezillon <boris.brezillon@bootlin.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: linux-mtd@lists.infradead.org Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: linux-sh@vger.kernel.org Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-19mtd: ubi: wl: Fix error return code in ubi_wl_init()Wei Yongjun1-2/+6
commit 7233982ade15eeac05c6f351e8d347406e6bcd2f upstream. Fix to return error code -ENOMEM from the kmem_cache_alloc() error handling case instead of 0, as done elsewhere in this function. Fixes: f78e5623f45b ("ubi: fastmap: Erase outdated anchor PEBs during attach") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Richard Weinberger <richard@nod.at> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-15mtd: nand: qcom: Add a NULL check for devm_kasprintf()Fabio Estevam1-0/+3
commit 069f05346d01e7298939f16533953cdf52370be3 upstream. devm_kasprintf() may fail, so we should better add a NULL check and propagate an error on failure. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-03mtd: rawnand: fsl_ifc: fix FSL NAND driver to read all ONFI parameter pagesJane Wan1-7/+10
[ Upstream commit a75bbe71a27875fdc61cde1af6d799037cef6bed ] Per ONFI specification (Rev. 4.0), if the CRC of the first parameter page read is not valid, the host should read redundant parameter page copies. Fix FSL NAND driver to read the two redundant copies which are mandatory in the specification. Signed-off-by: Jane Wan <Jane.Wan@nokia.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-22mtd: m25p80: consider max message size in m25p80_readHeiner Kallweit1-1/+2
commit 9e276de6a367cde07c1a63522152985d4e5cca8b upstream. Consider a message size limit when calculating the maximum amount of data that can be read. The message size limit has been introduced with 4.9, so cc it to stable. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-11mtd: cfi_cmdset_0002: Change erase functions to check chip good onlyTokunori Ikegami1-10/+12
commit 79ca484b613041ca223f74b34608bb6f5221724b upstream. Currently the functions use to check both chip ready and good. But the chip ready is not enough to check the operation status. So change this to check the chip good instead of this. About the retry functions to make sure the error handling remain it. Signed-off-by: Tokunori Ikegami <ikegami@allied-telesis.co.jp> Reviewed-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Brian Norris <computersforpeace@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr> Cc: linux-mtd@lists.infradead.org Cc: stable@vger.kernel.org Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-11mtd: cfi_cmdset_0002: Change erase functions to retry for errorTokunori Ikegami1-0/+10
commit 45f75b8a919a4255f52df454f1ffdee0e42443b2 upstream. For the word write functions it is retried for error. But it is not implemented to retry for the erase functions. To make sure for the erase functions change to retry as same. This is needed to prevent the flash erase error caused only once. It was caused by the error case of chip_good() in the do_erase_oneblock(). Also it was confirmed on the MACRONIX flash device MX29GL512FHT2I-11G. But the error issue behavior is not able to reproduce at this moment. The flash controller is parallel Flash interface integrated on BCM53003. Signed-off-by: Tokunori Ikegami <ikegami@allied-telesis.co.jp> Reviewed-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Brian Norris <computersforpeace@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr> Cc: linux-mtd@lists.infradead.org Cc: stable@vger.kernel.org Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-11mtd: cfi_cmdset_0002: Change definition naming to retry write operationTokunori Ikegami1-3/+3
commit 85a82e28b023de9b259a86824afbd6ba07bd6475 upstream. The definition can be used for other program and erase operations also. So change the naming to MAX_RETRIES from MAX_WORD_RETRIES. Signed-off-by: Tokunori Ikegami <ikegami@allied-telesis.co.jp> Reviewed-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com> Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Cc: Brian Norris <computersforpeace@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Richard Weinberger <richard@nod.at> Cc: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr> Cc: linux-mtd@lists.infradead.org Cc: stable@vger.kernel.org Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>