| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit 604cf6a40157abba4677dea9834de8df9047d798 upstream.
These chips must be described as none of the block protection
information are discoverable. This chip supports 4 bits plus the
top/bottom addressing capability to identify the protected blocks.
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 1df1fdbc7e63350b2962dc7d87ded124ee26f3ad upstream.
These chips must be described as none of the block protection
information are discoverable. This chip supports 4 bits plus the
top/bottom addressing capability to identify the protected blocks.
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f21d2c7d37553b24825918f2f61df123e182b712 upstream.
These chips must be described as none of the block protection
information are discoverable. This chip supports 4 bits plus the
top/bottom addressing capability to identify the protected blocks.
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 71c239348d9fbdb1f0d6f36013f1697cc06c3e9c upstream.
These chips must be described as none of the block protection
information are discoverable. This chip supports 4 bits plus the
top/bottom addressing capability to identify the protected blocks.
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a607e676c8b9258eabc3fc88f45bcd70ea178b41 upstream.
These chips must be described as none of the block protection
information are discoverable. This chip supports 4 bits plus the
top/bottom addressing capability to identify the protected blocks.
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit aee8c4d9d48d661624d72de670ebe5c6b5687842 upstream.
This chip must be described as none of the block protection information
are discoverable. This chip supports 4 bits plus the top/bottom
addressing capability to identify the protected blocks.
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 64ef5f454e167bb66cf70104f033c3d71e6ef9c0 upstream.
Commit 5c2f7727d437 ("mtd: mtdpart: check for subpartitions parsing
result") introduced some kind of regression with parser on subpartitions
where if a parser emits an error then the entire parsing process from the
upper parser fails and partitions are deleted.
Not checking for error in subpartitions was originally intended as
special parser can emit error also in the case of the partition not
correctly init (for example a wiped partition) or special case where the
partition should be skipped due to some ENV variables externally
provided (from bootloader for example)
One example case is the TRX partition where, in the context of a wiped
partition, returns a -ENOENT as the trx_magic is not found in the
expected TRX header (as the partition is wiped)
To better handle this and still keep some kind of error tracking (for
example to catch -ENOMEM errors or -EINVAL errors), permit parser on
subpartition to emit -ENOENT error, print a debug log and skip them
accordingly.
This results in giving better tracking of the status of the parser
(instead of returning just 0, dropping any kind of signal that there is
something wrong with the parser) and to some degree restore the original
logic of the subpartitions parse.
(worth to notice that some special partition might have all the special
header present for the parser and declare 0 partition in it, this is why
it would be wrong to simply return 0 in the case of a special partition
that is NOT init for the scanning parser)
Cc: stable@vger.kernel.org
Fixes: 5c2f7727d437 ("mtd: mtdpart: check for subpartitions parsing result")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c909fec69f84b39e63876c69b9df2c178c6b76ba ]
There are several places where a value of type 'int' is shifted by
lpddr->chipshift. lpddr->chipshift is derived from QINFO geometry and
might reach 31 when QINFO reports a 2 GiB size - the maximum supported by
LPDDR(1) compliant chips. This may cause unexpected sign-extensions when
casting the integer value to the type of 'unsigned long'.
Use '1UL << lpddr->chipshift' and cast 'j' to unsigned long before
shifting so the computation is performed at the destination width.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: c68264711ca6 ("[MTD] LPDDR Command set driver")
Signed-off-by: Ivan Stepchenko <sid@itb.spb.ru>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a3623e1ae1ed6be4d49b2ccb9996a9d2b65c1828 ]
devm_pm_runtime_enable() can fail due to memory allocation failures.
The current code ignores its return value and proceeds with
pm_runtime_resume_and_get(), which may operate on incorrectly
initialized runtime PM state.
Check the return value of devm_pm_runtime_enable() and return the
error code if it fails.
Fixes: 6a2277a0ebe7 ("mtd: rawnand: renesas: Use runtime PM instead of the raw clock API")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cdf44f1add4ec9ee80569d5a43e6e9bba0d74c7a ]
The driver calls gpiod_get_optional() in the probe function but
never calls gpiod_put() in the remove function or in the probe
error path. This leads to a GPIO descriptor resource leak.
The lpc32xx_mlc.c driver in the same directory handles this
correctly by calling gpiod_put() on both paths.
Add gpiod_put() in the remove function and in the probe error path
to fix the resource leak.
Fixes: 6b923db2867c ("mtd: rawnand: lpc32xx_slc: switch to using gpiod API")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 050553c683f21eebd7d1020df9b2ec852e2a9e4e ]
Due to the custom handling and layouts of certain nand controllers this
validity check will always fail for certain layouts. The check
inherently depends on even chunk sizing and this is not always the
case.
Modify the check to only print a warning, instead of failing to
init the attached NAND. This allows various 8 bit and 12 ECC strength
layouts to be used.
Fixes: 68c18dae6888 ("mtd: rawnand: marvell: add missing layouts")
Signed-off-by: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fbd72cb463fdea3a0c900dd5d6e813cdebc3a73c ]
This reverts commit e6a30d0c48a1e8a68f1cc413bee65302ab03ddfb.
This change resulted in the 8bit ECC layouts having the incorrect amount
of read/write chunks, the last spare bytes chunk would always be missed.
Fixes: e6a30d0c48a1 ("mtd: rawnand: marvell: fix layouts")
Signed-off-by: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
This was supposed to pass "onenand" instead of "&onenand" with the
ampersand. Passing a random stack address which will be gone when the
function ends makes no sense. However the good thing is that the pointer
is never used, so this doesn't cause a problem at run time.
Fixes: e23abf4b7743 ("mtd: OneNAND: S5PC110: Implement DMA interrupt method")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
According to datasheet (http://eng.fmsh.com/nvm/FM25S01A_ds_eng.pdf)
there is no QE (Quad Enable) bit for FM25S01A flash, so remove it.
Fixes: 5f284dc15ca86 ("mtd: spinand: add support for FudanMicro FM25S01A")
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Tested-by: Tianling Shen <cnsztl@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The DMA device pointer `dma_dev` was being dereferenced before ensuring
that `cdns_ctrl->dmac` is properly initialized.
Move the assignment of `dma_dev` after successfully acquiring the DMA
channel to ensure the pointer is valid before use.
Fixes: d76d22b5096c ("mtd: rawnand: cadence: use dma_map_resource for sdma address")
Cc: stable@vger.kernel.org
Signed-off-by: Niravkumar L Rabara <niravkumarlaxmidas.rabara@altera.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The rtl_ecc_engine_ops structure is only used to provide a set of
callback functions and is never modified after initialization.
Mark it as const so it can be placed in the read-only section, which
improves safety and allows better compiler optimization.
Signed-off-by: Li Qiang <liqiang01@kylinos.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
If CONFIG_NO_DMA=y:
ERROR: modpost: "dma_free_pages" [drivers/mtd/nand/ecc-realtek.ko] undefined!
ERROR: modpost: "dma_alloc_pages" [drivers/mtd/nand/ecc-realtek.ko] undefined!
The driver cannot function without DMA, hence fix this by adding a
dependency on HAS_DMA.
Fixes: 3148d0e5b1c5733d ("mtd: nand: realtek-ecc: Add Realtek external ECC engine support")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The dma_alloc_noncoherent() function doesn't return error pointers, it
returns NULL on error. Fix the error checking to match.
Fixes: 3148d0e5b1c5 ("mtd: nand: realtek-ecc: Add Realtek external ECC engine support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The "req.start" and "req.len" variables are u64 values that come from the
user at the start of the function. We mask away the high 32 bits of
"req.len" so that's capped at U32_MAX but the "req.start" variable can go
up to U64_MAX which means that the addition can still integer overflow.
Use check_add_overflow() to fix this bug.
Fixes: 095bb6e44eb1 ("mtdchar: add MEMREAD ioctl")
Fixes: 6420ac0af95d ("mtdchar: prevent unbounded allocation in MEMWRITE ioctl")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD core:
- Bad blocks increment is skipped if the block is already known bad
(improves user statistics relevance)
- Expose the OOB layout via debugfs
Raw NAND:
- Add support for Loongson-2K1000 and Loongson-2K0500 NAND
controllers, including extra features, such as chip select
and 6-byte NAND ID reading support
- Drop the s3c2410 driver
SPI NAND:
- Important SPI NAND continuous read improvements and fixes
- Add support for FudanMicro FM25S01A
- Add support for continuous reads in Gigadevice vendor driver
ECC:
- Add support for the Realtek ECC engine
SPI NOR:
- Some flashes can't perform reads or writes with start or end being
an odd number in Octal DTR mode. File systems like UBIFS can
request such reads or writes, causing the transaction to error out.
Pad the read or write transactions with extra bytes to avoid this
problem.
And the usual amount of various miscellaneous fixes"
* tag 'mtd/for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (46 commits)
mtd: rawnand: sunxi: drop unused module alias
mtd: rawnand: stm32_fmc2: drop unused module alias
mtd: rawnand: rockchip: drop unused module alias
mtd: rawnand: pl353: drop unused module alias
mtd: rawnand: omap2: drop unused module alias
mtd: rawnand: atmel: drop unused module alias
mtd: onenand: omap2: drop unused module alias
mtd: hyperbus: hbmc-am654: drop unused module alias
mtd: jedec_probe: use struct_size() helper for cfiq allocation
mtd: cfi: use struct_size() helper for cfiq allocation
mtd: nand: raw: gpmi: fix clocks when CONFIG_PM=N
mtd: rawnand: omap2: fix device leak on probe failure
mtd: rawnand: atmel: Fix error handling path in atmel_nand_controller_add_nands
mtd: nand: realtek-ecc: Add Realtek external ECC engine support
dt-bindings: mtd: Add realtek,rtl9301-ecc
mtd: spinand: repeat reading in regular mode if continuous reading fails
mtd: spinand: try a regular dirmap if creating a dirmap for continuous reading fails
mtd: spinand: fix direct mapping creation sizes
mtd: rawnand: fsmc: Default to autodetect buswidth
mtd: nand: move nand_check_erased_ecc_chunk() to nand/core
...
|
|
* Raw NAND:
- Add support for Loongson-2K1000 and Loongson-2K0500 NAND controllers,
including extra features, such as chip select and 6-byte NAND ID
reading support.
- Drop the s3c2410 driver.
* SPI NAND:
- Important SPI NAND continuous read improvements and fixes.
- Add support for FudanMicro FM25S01A.
- Add support for continuous reads in Gigadevice vendor driver.
* ECC:
- Add support for the Realtek ECC engine.
This PR comes with the usual amount of various miscellaneous fixes.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
SPI NOR changes for 6.18
Notable changes:
- Some flashes can't perform reads or writes with start or end being an
odd number in Octal DTR mode. File systems like UBIFS can request such
reads or writes, causing the transaction to error out. Pad the read or
write transactions with extra bytes to avoid this problem.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- FC target fixes (Daniel)
- Authentication fixes and updates (Martin, Chris)
- Admin controller handling (Kamaljit)
- Target lockdep assertions (Max)
- Keep-alive updates for discovery (Alastair)
- Suspend quirk (Georg)
- MD pull request via Yu:
- Add support for a lockless bitmap.
A key feature for the new bitmap are that the IO fastpath is
lockless. If a user issues lots of write IO to the same bitmap
bit in a short time, only the first write has additional overhead
to update bitmap bit, no additional overhead for the following
writes.
By supporting only resync or recover written data, means in the
case creating new array or replacing with a new disk, there is no
need to do a full disk resync/recovery.
- Switch ->getgeo() and ->bios_param() to using struct gendisk rather
than struct block_device.
- Rust block changes via Andreas. This series adds configuration via
configfs and remote completion to the rnull driver. The series also
includes a set of changes to the rust block device driver API: a few
cleanup patches, and a few features supporting the rnull changes.
The series removes the raw buffer formatting logic from
`kernel::block` and improves the logic available in `kernel::string`
to support the same use as the removed logic.
- floppy arch cleanups
- Reduce the number of dereferencing needed for ublk commands
- Restrict supported sockets for nbd. Mostly done to eliminate a class
of issues perpetually reported by syzbot, by using nonsensical socket
setups.
- A few s390 dasd block fixes
- Fix a few issues around atomic writes
- Improve DMA interation for integrity requests
- Improve how iovecs are treated with regards to O_DIRECT aligment
constraints.
We used to require each segment to adhere to the constraints, now
only the request as a whole needs to.
- Clean up and improve p2p support, enabling use of p2p for metadata
payloads
- Improve locking of request lookup, using SRCU where appropriate
- Use page references properly for brd, avoiding very long RCU sections
- Fix ordering of recursively submitted IOs
- Clean up and improve updating nr_requests for a live device
- Various fixes and cleanups
* tag 'for-6.18/block-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (164 commits)
s390/dasd: enforce dma_alignment to ensure proper buffer validation
s390/dasd: Return BLK_STS_INVAL for EINVAL from do_dasd_request
ublk: remove redundant zone op check in ublk_setup_iod()
nvme: Use non zero KATO for persistent discovery connections
nvmet: add safety check for subsys lock
nvme-core: use nvme_is_io_ctrl() for I/O controller check
nvme-core: do ioccsz/iorcsz validation only for I/O controllers
nvme-core: add method to check for an I/O controller
blk-cgroup: fix possible deadlock while configuring policy
blk-mq: fix null-ptr-deref in blk_mq_free_tags() from error path
blk-mq: Fix more tag iteration function documentation
selftests: ublk: fix behavior when fio is not installed
ublk: don't access ublk_queue in ublk_unmap_io()
ublk: pass ublk_io to __ublk_complete_rq()
ublk: don't access ublk_queue in ublk_need_complete_req()
ublk: don't access ublk_queue in ublk_check_commit_and_fetch()
ublk: don't pass ublk_queue to ublk_fetch()
ublk: don't access ublk_queue in ublk_config_io_buf()
ublk: don't access ublk_queue in ublk_check_fetch_buf()
ublk: pass q_id and tag to __ublk_check_and_get_req()
...
|
|
The driver has never supported anything but OF probing so drop the
unused platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The driver has never supported anything but OF probing so drop the
unused platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The driver has never supported anything but OF probing so drop the
unused platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The driver has never supported anything but OF probing so drop the
unused platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The driver only supports OF probing since commit 086c321ec57b ("mtd:
nand: omap2: Remove omap_nand_platform_data") so drop the unused
platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The driver only supports OF probing since commit f88fc122cc34 ("mtd:
nand: Cleanup/rework the atmel_nand driver") so drop the unused platform
module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The driver only supports OF probing since commit a758f50f10cf ("mtd:
onenand: omap2: Configure driver from DT") so drop the unused platform
module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The driver has never supported anything but OF probing so drop the
unused platform module alias.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Documentation/process/deprecated.rst recommends against performing
dynamic size calculations in the arguments of memory allocator
functions due to the risk of overflow. Such calculations can wrap
around and result in a smaller allocation than expected.
Replace the size calculation in cfiq allocation with struct_size()
helper to make the code clearer and handle overflows correctly.
Signed-off-by: Rahul Kumar <rk0006818@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Documentation/process/deprecated.rst recommends against performing
dynamic size calculations in the arguments of memory allocator
function due to the risk of overflow. Such calculations can
wrap around and result in a smaller allocation than what the caller
was expecting.
Replace the size calculation in cfiq allocation with struct_size()
helper to make the code clearer and handle the overflows correctly.
Signed-off-by: Gopi Krishna Menon <krishnagopi487@gmail.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
link: https://lore.kernel.org/linux-kernel-mentees/20250922071137.900508-1-rk0006818@gmail.com/T/#u
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Commit f04ced6d545e ("mtd: nand: raw: gpmi: improve power management
handling") moved all clock handling into PM callbacks. With CONFIG_PM
disabled, those callbacks are missing, leaving the driver unusable.
Add clock init/teardown for !CONFIG_PM builds to restore basic operation.
Keeping the driver working without requiring CONFIG_PM is preferred over
adding a Kconfig dependency.
Fixes: f04ced6d545e ("mtd: nand: raw: gpmi: improve power management handling")
Signed-off-by: Maarten Zanders <maarten@zanders.be>
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Make sure to drop the reference to the elm device taken by
of_find_device_by_node() during probe on errors and on driver unload.
Fixes: 62116e5171e0 ("mtd: nand: omap2: Support for hardware BCH error correction.")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
In case of a jump to the err label due to atmel_nand_create() or
atmel_nand_controller_add_nand() failure, the reference to nand_np
need to be released
Use for_each_child_of_node_scoped() to fix the issue.
Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver")
Signed-off-by: Erick Karanja <karanja99erick@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The Realtek RTl93xx switch SoC series has a built in ECC controller
that can provide BCH6 or BCH12 over 512 data and 6 tag bytes. It
generates 10 (BCH6) or 20 (BCH12) bytes of parity.
This engine will most likely work in conjunction with the Realtek
spi-mem based NAND controller but can work on its own. Therefore
the initial implementation will be of type external.
Remark! The engine can support any data blocks that are multiples
of 512 bytes. For now limit it to data+oob layouts that have been
analyzed from existing devices. This way it keeps compatibility
and pre-existing vendor data can be read.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Continuous reading may result in multiple flash pages reading in one
operation. Unfortunately, not all spinand controllers support such
large reading. They will read less data. Unfortunately, the operation
can't be continued.
In this case:
* disable continuous reading on this (not good enough) spi controller
* repeat reading in regular mode.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
reading fails
Continuous reading may result in multiple flash pages reading in one
operation. Typically only one flash page has read/written (a little bit
more than 2-4 Kb), but continuous reading requires the spi controller
to read up to 512 Kb in one operation without toggling CS in beetween.
Roughly speaking spi controllers can be divided on 2 categories:
* spi controllers without dirmap acceleration support
* spi controllers with dirmap acceleration support
Firt of them will have issues with continuous reading if restriction on
the transfer length is implemented in the adjust_op_size() handler.
Second group often supports acceleration of single page only reading.
Thus enabling of continuous reading can break flash reading.
This patch tries to create dirmap for continuous reading first and
fallback to regular reading if spi controller refuses to create it.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Continuous mode is only supported for data reads, thus writing
requires only single flash page mapping.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
If you don't specify buswidth 2 (16 bits) in the device
tree, FSMC doesn't even probe anymore:
fsmc-nand 10100000.flash: FSMC device partno 090,
manufacturer 80, revision 00, config 00
nand: device found, Manufacturer ID: 0x20, Chip ID: 0xb1
nand: ST Micro 10100000.flash
nand: bus width 8 instead of 16 bits
nand: No NAND device found
fsmc-nand 10100000.flash: probe with driver fsmc-nand failed
with error -22
With this patch to use autodetection unless buswidth is
specified, the device is properly detected again:
fsmc-nand 10100000.flash: FSMC device partno 090,
manufacturer 80, revision 00, config 00
nand: device found, Manufacturer ID: 0x20, Chip ID: 0xb1
nand: ST Micro NAND 128MiB 1,8V 16-bit
nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
fsmc-nand 10100000.flash: Using 1-bit HW ECC scheme
Scanning device for bad blocks
I don't know where or how this happened, I think some change
in the nand core.
Cc: stable@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The check function for bitflips in erased blocks will be needed
by the Realtek ECC engine driver (which is currently under
development). Right now it is located in raw/nand_base.c.
While this is sufficient for the current usecases, there is
no real dependency for an ECC engine on the raw nand library.
Move the function over to a more generic place in core library.
Suggested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
A working init shall be silent rather than exposing the configuration
with kernel messages at the error level.
Thwart myself from the past and use the debug level for these.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Repeatedly marking the same eraseblock bad inflates
mtd->ecc_stats.badblocks because mtd_block_markbad() unconditionally
increments the counter on success, while some implementations (e.g.
NAND) return 0 both when the block was already bad and when it has just
been marked[1].
Fix by checking if the block is already bad before calling
->_block_markbad() when _block_isbad is available. Only skip the counter
increment when we can confirm the block was already bad. In all other
cases continue incrementing the counter.
This keeps the logic centralized in mtdcore without requiring driver
changes.
Link: https://lore.kernel.org/all/ef573188-9815-4a6b-bad1-3d8ff7c9b16f@huaweicloud.com/ [1]
Signed-off-by: Wang Zhaolong <wangzhaolong@huaweicloud.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Remove array_size() calls and replace vmalloc(array_size()) with
vmalloc_array() and vzalloc(array_size()) with vcalloc() to simplify
the code.
Compile-tested only.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Add two new debugfs files which allows to determine the OOB layout
used by a given MTD device. This can be useful to verify the current
layout during driver development without adding extra debug code.
The exposed information also makes it easier to analyze NAND dumps
without the need of crawling out the layout from the driver code.
The content of the new debugfs files is similar to this:
# cat /sys/kernel/debug/mtd/mtd0/ooblayout_ecc
0 0 49
1 65 63
# cat /sys/kernel/debug/mtd/mtd0/ooblayout_free
0 49 16
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
There is an extraneous space before a newline in a handful of printk
messages. Remove the spaces.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
There is a extraneous space before a newline in a pr_debug message.
Remove the space and remove a space after ( and before literal string
to clean up checkpatch warning.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The Loongson-2K1000 NAND controller is also similar to the Loongson-1C.
It supports a maximum capacity of 16GB FLASH per chip with a maximum
page size of 8KB, and it supports up to 4 chip selects and 4 RDY
signals.
The key difference from the Loongson-2K0500 is that it requires explicit
configuration of the DMA control route. Typically, it is configured as
APBDMA0.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
The Loongson-2K0500 NAND controller is similar to the Loongson-1C.
It supports a maximum capacity of 16GB FLASH per chip with a maximum
page size of 8KB, and it supports up to 4 chip selects and 4 RDY
signals.
Its DMA controller is defaulted to APBDMA0.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
