summaryrefslogtreecommitdiff
path: root/drivers/mtd/spi-nor
AgeCommit message (Collapse)AuthorFilesLines
2014-07-14mtd: spi-nor: add support for EON EN25QH128Sergey Ryazanov1-0/+1
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-07-12mtd: spi-nor: add support for flag status register on Micron chipsgrmoore@altera.com1-0/+52
Some new Micron flash chips require reading the flag status register to determine when operations have completed. Furthermore, chips with multi-die stacks of the 65nm 256Mb QSPI also require reading the status register before reading the flag status register. This patch adds support for the flag status register in the n25q512ax3 and n25q00 Micron QSPI flash chips. Signed-off-by: Graham Moore <grmoore@altera.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-05-13mtd: spi-nor: Enable Dual and Quad SPI read transfers for s25sl032pGeert Uytterhoeven1-1/+1
Spansion s25sl032p supports Dual and Quad SPI transfers, hence set the SPI_NOR_DUAL_READ and SPI_NOR_QUAD_READ flags. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-04-16mtd: fsl-quadspi: fix __iomem annotationsBrian Norris1-2/+2
This corrects some sparse warnings: drivers/mtd/spi-nor/fsl-quadspi.c:281:31: warning: incorrect type in initializer (different address spaces) [sparse] drivers/mtd/spi-nor/fsl-quadspi.c:281:31: expected void *[noderef] <asn:2>base [sparse] drivers/mtd/spi-nor/fsl-quadspi.c:281:31: got void [noderef] <asn:2>*iobase [sparse] (etc.) Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Huang Shijie <b32955@freescale.com>
2014-04-14mtd: spi-nor: allow to be built as moduleBrian Norris1-2/+2
There's no reason this can't be a module. Also, give SPI-NOR its own submenu. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de>
2014-04-14mtd: spi-nor: shorten Kconfig namingBrian Norris2-4/+9
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Huang Shijie <b32955@freescale.com>
2014-04-14mtd: spi-nor: unify read opcode variants with ST SPI FSMBrian Norris2-11/+11
serial_flash_cmds.h defines our opcodes a little differently. Let's borrow its naming, since it's borrowed from the SFDP standard, and it's more extensible. This prepares us for merging serial_flash_cmds.h and spi-nor.h opcode listing. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Huang Shijie <b32955@freescale.com>
2014-04-14mtd: spi-nor: re-name OPCODE_* to SPINOR_OP_*Brian Norris2-61/+61
Qualify these with a better namespace, and prepare them for use in more drivers. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Huang Shijie <b32955@freescale.com>
2014-04-14mtd: spi-nor: add the copyright informationHuang Shijie1-1/+5
Add the copyright information for spi-nor.c and spi-nor.h. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-04-14mtd: spi-nor: EXPORT symbols which could be used by module driversBrian Norris1-0/+3
Fix errors like this: ERROR: "spi_nor_ids" [drivers/mtd/devices/m25p80.ko] undefined! ERROR: "spi_nor_scan" [drivers/mtd/devices/m25p80.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-04-14mtd: spi-nor: Add Freescale QuadSPI driverHuang Shijie3-0/+1016
(0) What is the QuadSPI controller? The QuadSPI(Quad Serial Peripheral Interface) acts as an interface to one single or two external serial flash devices, each with up to 4 bidirectional data lines. (1) The QuadSPI controller is driven by the LUT(Look-up Table) registers. The LUT registers are a look-up-table for sequences of instructions. A valid sequence consists of four LUT registers. (2) The definition of the LUT register shows below: --------------------------------------------------- | INSTR1 | PAD1 | OPRND1 | INSTR0 | PAD0 | OPRND0 | --------------------------------------------------- There are several types of INSTRx, such as: CMD : the SPI NOR command. ADDR : the address for the SPI NOR command. DUMMY : the dummy cycles needed by the SPI NOR command. .... There are several types of PADx, such as: PAD1 : use a singe I/O line. PAD2 : use two I/O lines. PAD4 : use quad I/O lines. .... (3) Test this driver with the JFFS2 and UBIFS: For jffs2: ------------- #flash_eraseall /dev/mtd0 #mount -t jffs2 /dev/mtdblock0 tmp #bonnie++ -d tmp -u 0 -s 10 -r 5 For ubifs: ------------- #flash_eraseall /dev/mtd0 #ubiattach /dev/ubi_ctrl -m 0 #ubimkvol /dev/ubi0 -N test -m #mount -t ubifs ubi0:test tmp #bonnie++ -d tmp -u 0 -s 10 -r 5 Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-04-14mtd: spi-nor: add a helper to find the spi_device_idHuang Shijie1-0/+12
Add the spi_nor_match_id() to find the proper spi_device_id with the NOR flash's name in the spi_nor_ids table. Signed-off-by: Huang Shijie <b32955@freescale.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-04-14mtd: spi-nor: add the framework for SPI NORHuang Shijie3-0/+1095
This patch cloned most of the m25p80.c. In theory, it adds a new spi-nor layer. Before this patch, the layer is like: MTD ------------------------ m25p80 ------------------------ spi bus driver ------------------------ SPI NOR chip After this patch, the layer is like: MTD ------------------------ spi-nor ------------------------ m25p80 ------------------------ spi bus driver ------------------------ SPI NOR chip With the spi-nor controller driver(Freescale Quadspi), it looks like: MTD ------------------------ spi-nor ------------------------ fsl-quadspi ------------------------ SPI NOR chip New APIs: spi_nor_scan: used to scan a spi-nor flash. Signed-off-by: Huang Shijie <b32955@freescale.com> Acked-by: Marek Vasut <marex@denx.de> [Brian: rebased to include additional m25p_ids[] entry] Signed-off-by: Brian Norris <computersforpeace@gmail.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-31 02:04:02 +0300