summaryrefslogtreecommitdiff
path: root/drivers/mtd/nand
AgeCommit message (Collapse)AuthorFilesLines
2022-08-17mtd: rawnand: meson: Fix a potential double free issueChristophe JAILLET1-1/+0
[ Upstream commit ec0da06337751b18f6dee06b6526e0f0d6e80369 ] When meson_nfc_nand_chip_cleanup() is called, it will call: meson_nfc_free_buffer(&meson_chip->nand); nand_cleanup(&meson_chip->nand); nand_cleanup() in turn will call nand_detach() which calls the .detach_chip() which is here meson_nand_detach_chip(). meson_nand_detach_chip() already calls meson_nfc_free_buffer(), so we could double free some memory. Fix it by removing the unneeded explicit call to meson_nfc_free_buffer(). Fixes: 8fae856c5350 ("mtd: rawnand: meson: add support for Amlogic NAND flash controller") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Liang Yang <liang.yang@amlogic.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/ec15c358b8063f7c50ff4cd628cf0d2e14e43f49.1653064877.git.christophe.jaillet@wanadoo.fr Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-17mtd: rawnand: arasan: Update NAND bus clock instead of system clockAmit Kumar Mahapatra1-4/+4
commit 7499bfeedb47efc1ee4dc793b92c610d46e6d6a6 upstream. In current implementation the Arasan NAND driver is updating the system clock(i.e., anand->clk) in accordance to the timing modes (i.e., SDR or NVDDR). But as per the Arasan NAND controller spec the flash clock or the NAND bus clock(i.e., nfc->bus_clk), need to be updated instead. This patch keeps the system clock unchanged and updates the NAND bus clock as per the timing modes. Fixes: 197b88fecc50 ("mtd: rawnand: arasan: Add new Arasan NAND controller") CC: stable@vger.kernel.org # 5.8+ Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220628154824.12222-2-amit.kumar-mahapatra@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-17mtd: rawnand: arasan: Fix clock rate in NV-DDROlga Kitaina1-1/+7
commit e16eceea863b417fd328588b1be1a79de0bc937f upstream. According to the Arasan NAND controller spec, the flash clock rate for SDR must be <= 100 MHz, while for NV-DDR it must be the same as the rate of the CLK line for the mode. The driver previously always set 100 MHz for NV-DDR, which would result in incorrect behavior for NV-DDR modes 0-4. The appropriate clock rate can be calculated from the NV-DDR timing parameters as 1/tCK, or for rates measured in picoseconds, 10^12 / nand_nvddr_timings->tCK_min. Fixes: 197b88fecc50 ("mtd: rawnand: arasan: Add new Arasan NAND controller") CC: stable@vger.kernel.org # 5.8+ Signed-off-by: Olga Kitaina <okitain@gmail.com> Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220628154824.12222-3-amit.kumar-mahapatra@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-15mtd: rawnand: gpmi: Set WAIT_FOR_READY timeout based on program/erase timesSascha Hauer1-2/+4
06781a5026350 Fixes the calculation of the DEVICE_BUSY_TIMEOUT register value from busy_timeout_cycles. busy_timeout_cycles is calculated wrong though: It is calculated based on the maximum page read time, but the timeout is also used for page write and block erase operations which require orders of magnitude bigger timeouts. Fix this by calculating busy_timeout_cycles from the maximum of tBERS_max and tPROG_max. This is for now the easiest and most obvious way to fix the driver. There's room for improvements though: The NAND_OP_WAITRDY_INSTR tells us the desired timeout for the current operation, so we could program the timeout dynamically for each operation instead of setting a fixed timeout. Also we could wire up the interrupt handler to actually detect and forward timeouts occurred when waiting for the chip being ready. As a sidenote I verified that the change in 06781a5026350 is really correct. I wired up the interrupt handler in my tree and measured the time between starting the operation and the timeout interrupt handler coming in. The time increases 41us with each step in the timeout register which corresponds to 4096 clock cycles with the 99MHz clock that I have. Fixes: 06781a5026350 ("mtd: rawnand: gpmi: Fix setting busy timeout setting") Fixes: b1206122069aa ("mtd: rawniand: gpmi: use core timings instead of an empirical derivation") Cc: stable@vger.kernel.org Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Han Xu <han.xu@nxp.com> Tested-by: Tomasz Moń <tomasz.mon@camlingroup.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2022-06-16mtd: rawnand: gpmi: Fix setting busy timeout settingSascha Hauer1-1/+1
The DEVICE_BUSY_TIMEOUT value is described in the Reference Manual as: | Timeout waiting for NAND Ready/Busy or ATA IRQ. Used in WAIT_FOR_READY | mode. This value is the number of GPMI_CLK cycles multiplied by 4096. So instead of multiplying the value in cycles with 4096, we have to divide it by that value. Use DIV_ROUND_UP to make sure we are on the safe side, especially when the calculated value in cycles is smaller than 4096 as typically the case. This bug likely never triggered because any timeout != 0 usually will do. In my case the busy timeout in cycles was originally calculated as 2408, which multiplied with 4096 is 0x968000. The lower 16 bits were taken for the 16 bit wide register field, so the register value was 0x8000. With 2970bf5a32f0 ("mtd: rawnand: gpmi: fix controller timings setting") however the value in cycles became 2384, which multiplied with 4096 is 0x950000. The lower 16 bit are 0x0 now resulting in an intermediate timeout when reading from NAND. Fixes: b1206122069aa ("mtd: rawnand: gpmi: use core timings instead of an empirical derivation") Cc: stable@vger.kernel.org Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220614083138.3455683-1-s.hauer@pengutronix.de
2022-06-09Revert "mtd: rawnand: add support for Toshiba TC58NVG0S3HTA00 NAND flash"Christian Lamparter1-3/+0
This reverts commit 3380557fc7e28d9bce7607e16d98f123d36da4ca. It turned out this "4-byte" ID might have been an honest mistake. Regrettably, the chip Andreas has might be a counterfeit or is damaged in some other way and shouldn't have ended up in a router. Andreas reported his chip is returning just four bytes: "98 f1 80 15 00 00 00 00". However, according to Kioxia/Toshiba's datasheet, there should have been at least another byte that would have contained the correct OOB size that Andreas needed. Miquel and Andreas are both favoring reverting the patch over further, possibly hacky modifications: "[Reverting] is the safest option here. Apart from this device, we do not know how many devices have these damaged/counterfeit chips. If it is just a couple and only on Fritzboxes, as suggested in the Github issue the patch could be carried through OpenWrt[...]" Thanks to several users on the openwrt forum and github issue, who stayed along for the ride: - Peter-vdL for reporting the issue and testing patches. - neg2led and Hannu Nyman who did all the datasheet digging and debugging. Cc: Andreas Boehler <dev@aboehler.at> Suggested-by: Andreas Boehler <dev@aboehler.at> Suggested-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://github.com/openwrt/openwrt/issues/9962 Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220607185918.1048204-1-chunkeey@gmail.com
2022-05-25Merge tag 'mtd/for-5.19' of ↵Linus Torvalds26-160/+623
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull mtd updates from Miquel Raynal: "MTD core changes: - Call of_platform_populate() for MTD partitions - Check devicetree alias for index - mtdoops: - Add a timestamp to the mtdoops header. - Create a header structure for the saved mtdoops. - Fix the size of the header read buffer. - mtdblock: Warn if opened on NAND - Bindings: - reserved-memory: Support MTD/block device - jedec,spi-nor: remove unneeded properties - Extend fixed-partitions binding - Add Sercomm (Suzhou) Corporation vendor prefix MTD driver changes: - st_spi_fsm: add missing clk_disable_unprepare() in stfsm_remove() - phram: - Allow cached mappings - Allow probing via reserved-memory - maps: ixp4xx: Drop driver - bcm47xxpart: Print correct offset on read error CFI driver changes: - Rename chip_ready variables - Add S29GL064N ID definition - Use chip_ready() for write on S29GL064N - Move and rename chip_check/chip_ready/chip_good_for_write NAND core changes: - Print offset instead of page number for bad blocks Raw NAND controller drivers: - Cadence: Fix possible null-ptr-deref in cadence_nand_dt_probe() - CS553X: simplify the return expression of cs553x_write_ctrl_byte() - Davinci: Remove redundant unsigned comparison to zero - Denali: Use managed device resources - GPMI: - Add large oob bch setting support - Rename the variable ecc_chunk_size - Uninline the gpmi_check_ecc function - Add strict ecc strength check - Refactor BCH geometry settings function - Intel: Fix possible null-ptr-deref in ebu_nand_probe() - MPC5121: Check before clk_disable_unprepare() not needed - Mtk: - MTD_NAND_ECC_MEDIATEK should depend on ARCH_MEDIATEK - Also parse the default nand-ecc-engine property if available - Make mtk_ecc.c a separated module - OMAP ELM: - Convert the bindings to yaml - Describe the bindings for AM64 ELM - Add support for its compatible - Renesas: Use runtime PM instead of the raw clock API and update the bindings accordingly - Rockchip: Check before clk_disable_unprepare() not needed - TMIO: Check return value after calling platform_get_resource() Raw NAND chip driver: - Kioxia: Add support for TH58NVG3S0HBAI4 and TC58NVG0S3HTA00 SPI-NAND chip drivers: - Gigadevice: - Add support for: - GD5FxGM7xExxG - GD5F{2,4}GQ5xExxG - GD5F1GQ5RExxG - GD5FxGQ4xExxG - Fix Quad IO for GD5F1GQ5UExxG - XTX: Add support for XT26G0xA SPI NOR core changes: - Read back written SR value to make sure the write was done correctly. - Introduce a common function for Read ID that manufacturer drivers can use to verify the Octal DTR switch worked correctly. - Add helpers for read/write any register commands so manufacturer drivers don't open code it every time. - Clarify rdsr dummy cycles documentation. - Add debugfs entry to expose internal flash parameters and state. SPI NOR manufacturer drivers changes: - Add support for Winbond W25Q512NW-IM, and Eon EN25QH256A. - Move spi_nor_write_ear() to Winbond module since only Winbond flashes use it. - Rework Micron and Cypress Octal DTR enable methods to improve readability. - Use the common Read ID function to verify switch to Octal DTR mode for Micron and Cypress flashes. - Skip polling status on volatile register writes for Micron and Cypress flashes since the operation is instant" * tag 'mtd/for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (68 commits) mtd: st_spi_fsm: add missing clk_disable_unprepare() in stfsm_remove() dt-bindings: mtd: partitions: Extend fixed-partitions binding dt-bindings: Add Sercomm (Suzhou) Corporation vendor prefix mtd: phram: Allow cached mappings mtd: call of_platform_populate() for MTD partitions mtd: rawnand: renesas: Use runtime PM instead of the raw clock API dt-bindings: mtd: renesas: Fix the NAND controller description mtd: rawnand: mpc5121: Check before clk_disable_unprepare() not needed mtd: rawnand: rockchip: Check before clk_disable_unprepare() not needed mtd: nand: MTD_NAND_ECC_MEDIATEK should depend on ARCH_MEDIATEK mtd: rawnand: cs553x: simplify the return expression of cs553x_write_ctrl_byte() mtd: rawnand: kioxia: Add support for TH58NVG3S0HBAI4 mtd: spi-nor: debugfs: fix format specifier mtd: spi-nor: support eon en25qh256a variant mtd: spi-nor: winbond: add support for W25Q512NW-IM mtd: spi-nor: expose internal parameters via debugfs mtd: spi-nor: export spi_nor_hwcaps_pp2cmd() mtd: spi-nor: move spi_nor_write_ear() to winbond module mtd: spi-nor: amend the rdsr dummy cycles documentation mtd: cfi_cmdset_0002: Rename chip_ready variables ...
2022-05-16mtd: rawnand: renesas: Use runtime PM instead of the raw clock APIMiquel Raynal1-28/+23
This NAND controller is part of a well defined power domain handled by the runtime PM core. Let's keep the harmony with the other RZ/N1 drivers and exclusively use the runtime PM API to enable/disable the clocks. We still need to retrieve the external clock rate in order to derive the NAND timings, but that is not a big deal, we can still do that in the probe and just save this value to reuse it later. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/linux-mtd/20220513104957.257721-3-miquel.raynal@bootlin.com
2022-05-16mtd: rawnand: mpc5121: Check before clk_disable_unprepare() not neededPhil Edworthy1-2/+1
All code in clk_disable_unprepare() already checks the clk ptr using IS_ERR_OR_NULL so there is no need to check it again before calling it. A lot of other drivers already rely on this behaviour, so it's safe to do so here. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220512185033.46901-1-phil.edworthy@renesas.com
2022-05-16mtd: rawnand: rockchip: Check before clk_disable_unprepare() not neededPhil Edworthy1-4/+2
All code in clk_disable_unprepare() already checks the clk ptr using IS_ERR_OR_NULL so there is no need to check it again before calling it. A lot of other drivers already rely on this behaviour, so it's safe to do so here. Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220512184558.45966-1-phil.edworthy@renesas.com
2022-05-12mtd: nand: MTD_NAND_ECC_MEDIATEK should depend on ARCH_MEDIATEKGeert Uytterhoeven1-0/+1
The MediaTek Hardware ECC Engine is only present on MediaTek MT27xx and MT76xx SoCs. The driver for this engine is a dependency for the MediaTek NAND controller (MTD_NAND_MTK) and the MediaTek SPI NAND Flash Interface (SPI_MTK_SNFI) drivers, both of which already depend on ARCH_MEDIATEK. Hence add a dependency on ARCH_MEDIATEK to the Hardware ECC Engine driver, too, to prevent asking the user about this driver when configuring a kernel without MediaTek SoC support. Fixes: 4fd62f15afa0d0da ("mtd: nand: make mtk_ecc.c a separated module") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/bb9568e825d4bc7506870b03836baa91bcc4b725.1652104136.git.geert+renesas@glider.be
2022-05-12mtd: rawnand: cs553x: simplify the return expression of cs553x_write_ctrl_byte()Minghao Chi1-6/+1
Simplify the return expression. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220505022354.61458-1-chi.minghao@zte.com.cn
2022-05-12mtd: rawnand: kioxia: Add support for TH58NVG3S0HBAI4Rickard x Andersson2-2/+7
Add timings for Kioxia/Toshiba TH58NVG3S0HBAI4. Timings for this memory matches the timings selected for TH58NVG2S3HBAI4. This patch increases eraseblock write speed from 5248 KiB/s to 6864 KiB/s and erase block read speed from 8542 KiB/s to 18360 KiB/s Tested on i.MX6SX. Signed-off-by: Rickard x Andersson <rickaran@axis.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220429083931.26795-1-rickaran@axis.com
2022-04-27Merge tag 'mtd/mtk-spi-nand-for-5.19' into nand/nextMiquel Raynal7-52/+16
Mediatek ECC changes: * Also parse the default nand-ecc-engine property if available * Make mtk_ecc.c a separated module Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2022-04-27mtd: nand: mtk-ecc: also parse nand-ecc-engine if availableChuanhong Guo1-1/+4
The recently added ECC engine support introduced a generic property named nand-ecc-engine for ecc engine phandle. This patch adds support for this new property. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220424032527.673605-4-gch981213@gmail.com
2022-04-27mtd: nand: make mtk_ecc.c a separated moduleChuanhong Guo7-51/+12
this code will be used in mediatek snfi spi-mem controller with pipelined ECC engine. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220424032527.673605-2-gch981213@gmail.com
2022-04-27mtd: rawnand: tmio: check return value after calling platform_get_resource()Yang Yingliang1-0/+3
It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220426084913.4021868-3-yangyingliang@huawei.com
2022-04-27mtd: rawnand: intel: fix possible null-ptr-deref in ebu_nand_probe()Yang Yingliang1-1/+1
It will cause null-ptr-deref when using 'res', if platform_get_resource() returns NULL, so move using 'res' after devm_ioremap_resource() that will check it to avoid null-ptr-deref. Fixes: 0b1039f016e8 ("mtd: rawnand: Add NAND controller support on Intel LGM SoC") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220426084913.4021868-2-yangyingliang@huawei.com
2022-04-27mtd: rawnand: cadence: fix possible null-ptr-deref in cadence_nand_dt_probe()Yang Yingliang1-3/+2
It will cause null-ptr-deref when using 'res', if platform_get_resource() returns NULL, so move using 'res' after devm_ioremap_resource() that will check it to avoid null-ptr-deref. And use devm_platform_get_and_ioremap_resource() to simplify code. Fixes: ec4ba01e894d ("mtd: rawnand: Add new Cadence NAND driver to MTD subsystem") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220426084913.4021868-1-yangyingliang@huawei.com
2022-04-21mtd: rawnand: add support for Toshiba TC58NVG0S3HTA00 NAND flashAndreas Böhler1-0/+3
The Toshiba TC58NVG0S3HTA00 is detected with 64 byte OOB while the flash has 128 bytes OOB. This adds a static NAND ID entry to correct this. Tested on FRITZ!Box 7530 flashed with OpenWrt. Signed-off-by: Andreas Böhler <dev@aboehler.at> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220420104034.6333-1-dev@aboehler.at
2022-04-21mtd: spinand: Add support for XTX XT26G0xAFelix Matouschek3-1/+131
Add support for XTX Technology XT26G01AXXXXX, XTX26G02AXXXXX and XTX26G04AXXXXX SPI NAND. These are 3V, 1G/2G/4Gbit serial SLC NAND flash devices with on-die ECC (8bit strength per 512bytes). Tested on Teltonika RUTX10 flashed with OpenWrt. Links: - http://www.xtxtech.com/download/?AId=225 - https://datasheet.lcsc.com/szlcsc/2005251034_XTX-XT26G01AWSEGA_C558841.pdf Signed-off-by: Felix Matouschek <felix@matouschek.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220418132803.664103-1-felix@matouschek.org
2022-04-21mtd: rawnand: gpmi: Add large oob bch setting supportHan Xu2-5/+197
The code change proposes a new way to set bch geometry for large oob NAND (oobsize > 1KB). In this case, previous implementation can NOT guarantee the bad block mark always locates in data chunk, so we need a new way to do it. The general idea is, 1.Try all ECC strength from the maximum ecc that controller can support to minimum value required by NAND chip, any ECC strength makes the BBM locate in data chunk can be eligible. 2.If none of them works, using separate ECC for meta, which will add one extra ecc with the same ECC strength as other data chunks. This extra ECC can guarantee BBM located in data chunk, also we need to check if oob can afford it. Signed-off-by: Han Xu <han.xu@nxp.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220412025246.24269-6-han.xu@nxp.com
2022-04-21mtd: rawnand: gpmi: Rename the variable ecc_chunk_sizeHan Xu2-27/+34
There is only one variable ecc_chunk_size in bch_geometry data structure but two different field in BCH registers. The data0_size in BCH_FLASH0LAYOUT0 and datan_size in BCH_FLASH0LAYOUT1 should have dedicate variable since they might set to different values in some cases. For instance, if need dedicate ecc for meta area, the data0_size should be 0 rather than datan_size, but for all other cases, data0_size still equals to datan_size and it won't bring any function change. Signed-off-by: Han Xu <han.xu@nxp.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220412025246.24269-5-han.xu@nxp.com
2022-04-21mtd: rawnand: gpmi: Uninline the gpmi_check_ecc functionHan Xu1-1/+1
The gpmi_check_ecc() is not small after adding more strict ecc check, uninline it. Signed-off-by: Han Xu <han.xu@nxp.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220412025246.24269-4-han.xu@nxp.com
2022-04-21mtd: rawnand: gpmi: Add strict ecc strength checkHan Xu1-1/+14
Add nand_ecc_is_strong_enough() check in gpmi_check_ecc() function to make sure ecc strength can meet chip requirement. Signed-off-by: Han Xu <han.xu@nxp.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220412025246.24269-3-han.xu@nxp.com
2022-04-21mtd: rawnand: gpmi: Refactor bch geometry settings functionHan Xu1-12/+20
The code change refactor the bch geometry setting function, which doesn't change the default behavior, while user may choose to use chips required minimum ecc strength by DT flag "fsl,use-minimum-ecc". The default way to set bch geometry need to set the data chunk size(step_size) larger than oob size to make sure BBM locates in data chunk, then set the maximum ecc strength oob can hold. It always use unbalanced ECC layout, which ecc0 will cover both meta and data0 chunk. But the default bch setting is deprecated for large oobsize NAND (oobsize >1KB), so in the patch set, there is a split commit that introduces a new way to set bch geometry for large oob size NAND. For all other cases,set the bch geometry by chip required strength and step size, which uses the minimum ecc strength chip required. It can be explicitly enabled by DT flag "fsl,use-minimum-ecc", but need to be en/disabled in both u-boot and kernel at the same time. Signed-off-by: Han Xu <han.xu@nxp.com> Tested-by: Sean Nyekjaer <sean@geanix.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220412025246.24269-2-han.xu@nxp.com
2022-04-21mtd: rawnand: denali: Use managed device resourcesZheyu Ma1-11/+4
All of the resources used by this driver has managed interfaces, so use them. Otherwise we will get the following splat: [ 4.472703] denali-nand-pci 0000:00:05.0: timeout while waiting for irq 0x1000 [ 4.474071] denali-nand-pci: probe of 0000:00:05.0 failed with error -5 [ 4.473538] nand: No NAND device found [ 4.474068] BUG: unable to handle page fault for address: ffffc90005000410 [ 4.475169] #PF: supervisor write access in kernel mode [ 4.475579] #PF: error_code(0x0002) - not-present page [ 4.478362] RIP: 0010:iowrite32+0x9/0x50 [ 4.486068] Call Trace: [ 4.486269] <IRQ> [ 4.486443] denali_isr+0x15b/0x300 [denali] [ 4.486788] ? denali_direct_write+0x50/0x50 [denali] [ 4.487189] __handle_irq_event_percpu+0x161/0x3b0 [ 4.487571] handle_irq_event+0x7d/0x1b0 [ 4.487884] handle_fasteoi_irq+0x2b0/0x770 [ 4.488219] __common_interrupt+0xc8/0x1b0 [ 4.488549] common_interrupt+0x9a/0xc0 Fixes: 93db446a424c ("mtd: nand: move raw NAND related code to the raw/ subdir") Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220411125808.958276-1-zheyuma97@gmail.com
2022-04-21mtd: rawnand: qcom: fix memory corruption that causes panicMd Sadre Alam1-11/+13
This patch fixes a memory corruption that occurred in the nand_scan() path for Hynix nand device. On boot, for Hynix nand device will panic at a weird place: | Unable to handle kernel NULL pointer dereference at virtual address 00000070 | [00000070] *pgd=00000000 | Internal error: Oops: 5 [#1] PREEMPT SMP ARM | Modules linked in: | CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.17.0-01473-g13ae1769cfb0 #38 | Hardware name: Generic DT based system | PC is at nandc_set_reg+0x8/0x1c | LR is at qcom_nandc_command+0x20c/0x5d0 | pc : [<c088b74c>] lr : [<c088d9c8>] psr: 00000113 | sp : c14adc50 ip : c14ee208 fp : c0cc970c | r10: 000000a3 r9 : 00000000 r8 : 00000040 | r7 : c16f6a00 r6 : 00000090 r5 : 00000004 r4 :c14ee040 | r3 : 00000000 r2 : 0000000b r1 : 00000000 r0 :c14ee040 | Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none | Control: 10c5387d Table: 8020406a DAC: 00000051 | Register r0 information: slab kmalloc-2k start c14ee000 pointer offset 64 size 2048 | Process swapper/0 (pid: 1, stack limit = 0x(ptrval)) | nandc_set_reg from qcom_nandc_command+0x20c/0x5d0 | qcom_nandc_command from nand_readid_op+0x198/0x1e8 | nand_readid_op from hynix_nand_has_valid_jedecid+0x30/0x78 | hynix_nand_has_valid_jedecid from hynix_nand_init+0xb8/0x454 | hynix_nand_init from nand_scan_with_ids+0xa30/0x14a8 | nand_scan_with_ids from qcom_nandc_probe+0x648/0x7b0 | qcom_nandc_probe from platform_probe+0x58/0xac The problem is that the nand_scan()'s qcom_nand_attach_chip callback is updating the nandc->max_cwperpage from 1 to 4 or 8 based on page size. This causes the sg_init_table of clear_bam_transaction() in the driver's qcom_nandc_command() to memset much more than what was initially allocated by alloc_bam_transaction(). This patch will update nandc->max_cwperpage 1 to 4 or 8 based on page size in qcom_nand_attach_chip call back after freeing the previously allocated memory for bam txn as per nandc->max_cwperpage = 1 and then again allocating bam txn as per nandc->max_cwperpage = 4 or 8 based on page size in qcom_nand_attach_chip call back itself. Cc: stable@vger.kernel.org Fixes: 6a3cec64f18c ("mtd: rawnand: qcom: convert driver to nand_scan()") Reported-by: Konrad Dybcio <konrad.dybcio@somainline.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Co-developed-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Sricharan R <quic_srichara@quicinc.com> Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1650268107-5363-1-git-send-email-quic_mdalam@quicinc.com
2022-04-21mtd: rawnand: Fix return value check of wait_for_completion_timeoutMiaoqian Lin1-6/+8
wait_for_completion_timeout() returns unsigned long not int. It returns 0 if timed out, and positive if completed. The check for <= 0 is ambiguous and should be == 0 here indicating timeout which is the only error case. Fixes: 83738d87e3a0 ("mtd: sh_flctl: Add DMA capabilty") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220412083435.29254-1-linmq006@gmail.com
2022-04-11mtd: rawnand: omap_elm: Add compatible for AM64 ELMRoger Quadros1-0/+1
The AM64 SoC has the Error Locator Module. Add compatible id for it. Signed-off-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220326080726.30372-4-rogerq@kernel.org
2022-04-04mtd: rawnand: fix ecc parameters for mt7622Chuanhong Guo1-4/+8
According to the datasheet, mt7622 only has 5 ECC capabilities instead of 7, and the decoding error register is arranged as follows: +------+---------+---------+---------+---------+ | Bits | 19:15 | 14:10 | 9:5 | 4:0 | +------+---------+---------+---------+---------+ | Name | ERRNUM3 | ERRNUM2 | ERRNUM1 | ERRNUM0 | +------+---------+---------+---------+---------+ This means err_mask should be 0x1f instead of 0x3f and the number of bits shifted in mtk_ecc_get_stats should be 5 instead of 8. This commit introduces err_shift for the difference in this register and fix other existing parameters. Public MT7622 reference manual can be found on [0] and the info this commit is based on is from page 656 and page 660. [0]: https://wiki.banana-pi.org/Banana_Pi_BPI-R64#Documents Fixes: 98dea8d71931 ("mtd: nand: mtk: Support MT7622 NAND flash controller.") Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220402160315.919094-1-gch981213@gmail.com
2022-04-04mtd: rawnand: print offset instead of page number for bad blocksRafał Miłecki1-4/+5
This makes printed info consistent with other kernel messages. After scanning NAND BBT create_bbt() prints offset of each bad block. This change makes is easy to verify nand_erase_nand() failure reason. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220326163304.30806-1-zajec5@gmail.com
2022-04-04mtd: spinand: gigadevice: add support for GD5FxGM7xExxGChuanhong Guo1-0/+60
Add support for: GD5F{1,2}GM7{U,R}ExxG GD5F4GM8{U,R}ExxG These are new 27nm counterparts for the GD5FxGQ4 chips from GigaDevice with 8b/512b on-die ECC capability. These chips (and currently supported GD5FxGQ5 chips) have QIO DTR instruction for reading page cache. It isn't added in this patch because I don't have a DTR spi controller for testing. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220320100001.247905-6-gch981213@gmail.com
2022-04-04mtd: spinand: gigadevice: add support for GD5F{2, 4}GQ5xExxGChuanhong Guo1-0/+48
Add support for: GD5F2GQ5{U,R}ExxG GD5F4GQ6{U,R}ExxG These chips uses 4 dummy bytes for quad io and 2 dummy bytes for dual io. Besides that and memory layout, they are identical to their 1G variant. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220320100001.247905-5-gch981213@gmail.com
2022-04-04mtd: spinand: gigadevice: add support for GD5F1GQ5RExxGChuanhong Guo1-0/+10
This chip is the 1.8v version of GD5F1GQ5UExxG. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220320100001.247905-4-gch981213@gmail.com
2022-04-04mtd: spinand: gigadevice: add support for GD5FxGQ4xExxGChuanhong Guo1-0/+30
Add support for: GD5F1GQ4RExxG GD5F2GQ4{U,R}ExxG These chips differ from GD5F1GQ4UExxG only in chip ID, voltage and capacity. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220320100001.247905-3-gch981213@gmail.com
2022-04-04mtd: spinand: gigadevice: fix Quad IO for GD5F1GQ5UExxGChuanhong Guo1-1/+9
Read From Cache Quad IO (EBH) uses 2 dummy bytes on this chip according to page 23 of the datasheet[0]. [0]: https://www.gigadevice.com/datasheet/gd5f1gq5xexxg/ Fixes: 469b99248985 ("mtd: spinand: gigadevice: Support GD5F1GQ5UExxG") Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220320100001.247905-2-gch981213@gmail.com
2022-04-04mtd: rawnand: davinci: Remove redundant unsigned comparison to zeroWang Weiyang1-1/+1
Since core_chipsel is uint32_t, comparison to zero is redundant Signed-off-by: Wang Weiyang <wangweiyang2@huawei.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220317113907.96006-1-wangweiyang2@huawei.com
2022-03-25Merge tag 'mtd/changes-for-5.18' of ↵Linus Torvalds29-166/+1490
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Miquel Raynal: "There has been a lot of activity in the MTD subsystem recently, with a number of SPI-NOR cleanups as well as the introduction of ECC engines that can be used by SPI controllers (hence a few SPI patches in here). Core MTD changes: - Replace the expert mode symbols with a single helper - Fix misuses of of_match_ptr() - Remove partid and partname debugfs files - tests: Fix eraseblock read speed miscalculation for lower partition sizes - TRX parser: Allow to use on MediaTek MIPS SoCs MTD driver changes: - spear_smi: use GFP_KERNEL - mchp48l640: Add SPI ID table - mchp23k256: Add SPI ID table - blkdevs: Avoid soft lockups with some mtd/spi devices - aspeed-smc: Improve probe resilience Hyperbus changes: - HBMC_AM654 should depend on ARCH_K3 NAND core changes: - ECC: - Add infrastructure to support hardware engines - Add a new helper to retrieve the ECC context - Provide a helper to retrieve a pilelined engine device NAND-ECC changes: - Macronix ECC engine: - Add Macronix external ECC engine support - Support SPI pipelined mode - Make two read-only arrays static const - Fix compile test issue Raw NAND core changes: - Fix misuses of of_match_node() - Rework of_get_nand_bus_width() - Remove of_get_nand_on_flash_bbt() wrapper - Protect access to rawnand devices while in suspend - bindings: Document the wp-gpios property Rax NAND controller driver changes: - atmel: Fix refcount issue in atmel_nand_controller_init - nandsim: - Add NS_PAGE_BYTE_SHIFT macro to replace the repeat pattern - Merge repeat codes in ns_switch_state - Replace overflow check with kzalloc to single kcalloc - rockchip: Fix platform_get_irq.cocci warning - stm32_fmc2: Add NAND Write Protect support - pl353: Set the nand chip node as the flash node - brcmnand: Fix sparse warnings in bcma_nand - omap_elm: Remove redundant variable 'errors' - gpmi: - Support fast edo timings for mx28 - Validate controller clock rate - Fix controller timings setting - brcmnand: - Add BCMA shim - BCMA controller uses command shift of 0 - Allow platform data instantation - Add platform data structure for BCMA - Allow working without interrupts - Move OF operations out of brcmnand_init_cs() - Avoid pdev in brcmnand_init_cs() - Allow SoC to provide I/O operations - Assign soc as early as possible Onenand changes: - Check for error irq SPI-NAND core changes: - Delay a little bit the dirmap creation - Create direct mapping descriptors for ECC operations SPI-NAND driver changes: - macronix: Use random program load SPI NOR core changes: - Move vendor specific code out of the core into vendor drivers. - Unify all function and object names in the vendor modules. - Make setup() callback optional to improve readability. - Skip erase logic when the SPI_NOR_NO_ERASE flag is set at flash declaration. SPI changes: - Macronix SPI controller: - Fix the transmit path - Create a helper to configure the controller before an operation - Create a helper to ease the start of an operation - Add support for direct mapping - Add support for pipelined ECC operations - spi-mem: - Introduce a capability structure - Check the controller extra capabilities - cadence-quadspi/mxic: Provide capability structures - Kill the spi_mem_dtr_supports_op() helper - Add an ecc parameter to the spi_mem_op structure Binding changes: - Dropped mtd/cortina,gemini-flash.txt - Convert BCM47xx partitions to json-schema - Vendor prefixes: Clarify Macronix prefix - SPI NAND: Convert spi-nand description file to yaml - Raw NAND chip: Create a NAND chip description - Raw NAND controller: - Harmonize the property types - Fix a comment in the examples - Fix the reg property description - Describe Macronix NAND ECC engine - Macronix SPI controller: - Document the nand-ecc-engine property - Convert to yaml - The interrupt property is not mandatory" * tag 'mtd/changes-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (104 commits) mtd: nand: ecc: mxic: Fix compile test issue mtd: nand: mxic-ecc: make two read-only arrays static const mtd: hyperbus: HBMC_AM654 should depend on ARCH_K3 mtd: core: Remove partid and partname debugfs files dt-bindings: mtd: partitions: convert BCM47xx to the json-schema mtd: tests: Fix eraseblock read speed miscalculation for lower partition sizes mtd: rawnand: atmel: fix refcount issue in atmel_nand_controller_init mtd: rawnand: rockchip: fix platform_get_irq.cocci warning mtd: spi-nor: Skip erase logic when SPI_NOR_NO_ERASE is set mtd: spi-nor: renumber flags mtd: spi-nor: slightly change code style in spi_nor_sr_ready() mtd: spi-nor: spansion: rename vendor specific functions and defines mtd: spi-nor: spansion: convert USE_CLSR to a manufacturer flag mtd: spi-nor: move all spansion specifics into spansion.c mtd: spi-nor: spansion: slightly rework control flow in late_init() mtd: spi-nor: micron-st: rename vendor specific functions and defines mtd: spi-nor: micron-st: convert USE_FSR to a manufacturer flag mtd: spi-nor: move all micron-st specifics into micron-st.c mtd: spi-nor: xilinx: correct the debug message mtd: spi-nor: xilinx: rename vendor specific functions and defines ...
2022-03-23Merge tag 'nand/for-5.18' into mtd/nextMiquel Raynal14-138/+421
Raw NAND core changes: * Rework of_get_nand_bus_width() * Remove of_get_nand_on_flash_bbt() wrapper * Protect access to rawnand devices while in suspend * bindings: Document the wp-gpios property Rax NAND controller driver changes: * atmel: Fix refcount issue in atmel_nand_controller_init * nandsim: - Add NS_PAGE_BYTE_SHIFT macro to replace the repeat pattern - Merge repeat codes in ns_switch_state - Replace overflow check with kzalloc to single kcalloc * rockchip: Fix platform_get_irq.cocci warning * stm32_fmc2: Add NAND Write Protect support * pl353: Set the nand chip node as the flash node * brcmnand: Fix sparse warnings in bcma_nand * omap_elm: Remove redundant variable 'errors' * gpmi: - Support fast edo timings for mx28 - Validate controller clock rate - Fix controller timings setting * brcmnand: - Add BCMA shim - BCMA controller uses command shift of 0 - Allow platform data instantation - Add platform data structure for BCMA - Allow working without interrupts - Move OF operations out of brcmnand_init_cs() - Avoid pdev in brcmnand_init_cs() - Allow SoC to provide I/O operations - Assign soc as early as possible Onenand changes: * Check for error irq Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2022-03-22Merge tag 'for-5.18/block-2022-03-18' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+0
Pull block updates from Jens Axboe: - BFQ cleanups and fixes (Yu, Zhang, Yahu, Paolo) - blk-rq-qos completion fix (Tejun) - blk-cgroup merge fix (Tejun) - Add offline error return value to distinguish it from an IO error on the device (Song) - IO stats fixes (Zhang, Christoph) - blkcg refcount fixes (Ming, Yu) - Fix for indefinite dispatch loop softlockup (Shin'ichiro) - blk-mq hardware queue management improvements (Ming) - sbitmap dead code removal (Ming, John) - Plugging merge improvements (me) - Show blk-crypto capabilities in sysfs (Eric) - Multiple delayed queue run improvement (David) - Block throttling fixes (Ming) - Start deprecating auto module loading based on dev_t (Christoph) - bio allocation improvements (Christoph, Chaitanya) - Get rid of bio_devname (Christoph) - bio clone improvements (Christoph) - Block plugging improvements (Christoph) - Get rid of genhd.h header (Christoph) - Ensure drivers use appropriate flush helpers (Christoph) - Refcounting improvements (Christoph) - Queue initialization and teardown improvements (Ming, Christoph) - Misc fixes/improvements (Barry, Chaitanya, Colin, Dan, Jiapeng, Lukas, Nian, Yang, Eric, Chengming) * tag 'for-5.18/block-2022-03-18' of git://git.kernel.dk/linux-block: (127 commits) block: cancel all throttled bios in del_gendisk() block: let blkcg_gq grab request queue's refcnt block: avoid use-after-free on throttle data block: limit request dispatch loop duration block/bfq-iosched: Fix spelling mistake "tenative" -> "tentative" sr: simplify the local variable initialization in sr_block_open() block: don't merge across cgroup boundaries if blkcg is enabled block: fix rq-qos breakage from skipping rq_qos_done_bio() block: flush plug based on hardware and software queue order block: ensure plug merging checks the correct queue at least once block: move rq_qos_exit() into disk_release() block: do more work in elevator_exit block: move blk_exit_queue into disk_release block: move q_usage_counter release into blk_queue_release block: don't remove hctx debugfs dir from blk_mq_exit_queue block: move blkcg initialization/destroy into disk allocation/release handler sr: implement ->free_disk to simplify refcounting sd: implement ->free_disk to simplify refcounting sd: delay calling free_opal_dev sd: call sd_zbc_release_disk before releasing the scsi_device reference ...
2022-03-18Merge tag 'spi-nor/for-5.18' into mtd/nextMiquel Raynal5-12/+17
SPI NOR core changes: - move vendor specific code out of the core into vendor drivers. - unify all function and object names in the vendor modules. - make setup() callback optional to improve readability. - skip erase logic when the SPI_NOR_NO_ERASE flag is set at flash declaration. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2022-03-14mtd: nand: ecc: mxic: Fix compile test issueMiquel Raynal1-0/+1
Avoid random build errors with architectures which do not select HAS_IOMEM by depending on it in Kconfig. This fixes the following warning: /home/mraynal/0day/gcc-11.2.0-nolibc/s390-linux/bin/s390-linux-ld: drivers/mtd/nand/ecc-mxic.o: in function `mxic_ecc_probe': ecc-mxic.c:(.text+0x2244): undefined reference to `devm_platform_ioremap_resource' Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220314152336.75447-1-miquel.raynal@bootlin.com
2022-03-14mtd: nand: mxic-ecc: make two read-only arrays static constColin Ian King1-2/+2
Don't populate the read-only arrays possible_strength and spare_size on the stack but instead make them static const. Also makes the object code a little smaller. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220307230940.169235-1-colin.i.king@gmail.com
2022-03-14mtd: rawnand: atmel: fix refcount issue in atmel_nand_controller_initXin Xiong1-3/+11
The reference counting issue happens in several error handling paths on a refcounted object "nc->dmac". In these paths, the function simply returns the error code, forgetting to balance the reference count of "nc->dmac", increased earlier by dma_request_channel(), which may cause refcount leaks. Fix it by decrementing the refcount of specific object in those error paths. Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver") Co-developed-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Co-developed-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220304085330.3610-1-xiongx18@fudan.edu.cn
2022-03-14mtd: rawnand: rockchip: fix platform_get_irq.cocci warningYihao Han1-1/+0
Remove dev_err() messages after platform_get_irq*() failures. platform_get_irq() already prints an error. Generated by: scripts/coccinelle/api/platform_get_irq.cocci Signed-off-by: Yihao Han <hanyihao@vivo.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220303123431.3170-1-hanyihao@vivo.com
2022-03-07mtd: rawnand: omap2: Actually prevent invalid configuration and build errorRoger Quadros1-2/+1
The root of the problem is that we are selecting symbols that have dependencies. This can cause random configurations that can fail. The cleanest solution is to avoid using select. This driver uses interfaces from the OMAP_GPMC driver so we have to depend on it instead. Fixes: 4cd335dae3cf ("mtd: rawnand: omap2: Prevent invalid configuration and build error") Signed-off-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/linux-mtd/20220219193600.24892-1-rogerq@kernel.org
2022-02-18mtd: rawnand: stm32_fmc2: Add NAND Write Protect supportChristophe Kerello1-1/+39
This patch adds the support of the WP# signal. WP will be disabled in probe/resume callbacks and will be enabled in remove/suspend callbacks. Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220217144755.270679-3-christophe.kerello@foss.st.com
2022-02-18mtd: rawnand: pl353: Set the nand chip node as the flash nodeAmit Kumar Mahapatra1-1/+1
In devicetree the flash information is embedded within nand chip node, so during nand chip initialization the nand chip node should be passed to nand_set_flash_node() api, instead of nand controller node. Fixes: 08d8c62164a3 ("mtd: rawnand: pl353: Add support for the ARM PL353 SMC NAND controller") Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220209053427.27676-1-amit.kumar-mahapatra@xilinx.com
2022-02-18Merge tag 'mtd/spi-mem-ecc-for-5.18' into mtd/nextMiquel Raynal7-14/+1054
Topic branch bringing-in changes related to the support of ECC engines that can be used by SPI controllers to manage SPI NANDs as well as possibly by parallel NAND controllers. In particular, it brings support for Macronix ECC engine that can be used with Macronix SPI controller. The changes touch the NAND core, the NAND ECC core, the spi-mem layer, a SPI controller driver and add a new NAND ECC driver, as well as a number of binding updates. Binding changes: * Vendor prefixes: Clarify Macronix prefix * SPI NAND: Convert spi-nand description file to yaml * Raw NAND chip: Create a NAND chip description * Raw NAND controller: - Harmonize the property types - Fix a comment in the examples - Fix the reg property description * Describe Macronix NAND ECC engine * Macronix SPI controller: - Document the nand-ecc-engine property - Convert to yaml - The interrupt property is not mandatory NAND core changes: * ECC: - Add infrastructure to support hardware engines - Add a new helper to retrieve the ECC context - Provide a helper to retrieve a pilelined engine device NAND-ECC changes: * Macronix ECC engine: - Add Macronix external ECC engine support - Support SPI pipelined mode SPI-NAND core changes: * Delay a little bit the dirmap creation * Create direct mapping descriptors for ECC operations SPI-NAND driver changes: * macronix: Use random program load SPI changes: * Macronix SPI controller: - Fix the transmit path - Create a helper to configure the controller before an operation - Create a helper to ease the start of an operation - Add support for direct mapping - Add support for pipelined ECC operations * spi-mem: - Introduce a capability structure - Check the controller extra capabilities - cadence-quadspi/mxic: Provide capability structures - Kill the spi_mem_dtr_supports_op() helper - Add an ecc parameter to the spi_mem_op structure
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-17 20:01:29 +0300