summaryrefslogtreecommitdiff
path: root/drivers/mtd/nand/raw/brcmnand/brcmnand.c
AgeCommit message (Collapse)AuthorFilesLines
2024-03-25mtd: rawnand: brcmnand: Fix data access violation for STB chipWilliam Zhang1-1/+1
Florian reported the following kernel NULL pointer dereference issue on a BCM7250 board: [ 2.829744] Unable to handle kernel NULL pointer dereference at virtual address 0000000c when read [ 2.838740] [0000000c] *pgd=80000000004003, *pmd=00000000 [ 2.844178] Internal error: Oops: 206 [#1] SMP ARM [ 2.848990] Modules linked in: [ 2.852061] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.8.0-next-20240305-gd95fcdf4961d #66 [ 2.860436] Hardware name: Broadcom STB (Flattened Device Tree) [ 2.866371] PC is at brcmnand_read_by_pio+0x180/0x278 [ 2.871449] LR is at __wait_for_common+0x9c/0x1b0 [ 2.876178] pc : [<c094b6cc>] lr : [<c0e66310>] psr: 60000053 [ 2.882460] sp : f0811a80 ip : 00000012 fp : 00000000 [ 2.887699] r10: 00000000 r9 : 00000000 r8 : c3790000 [ 2.892936] r7 : 00000000 r6 : 00000000 r5 : c35db440 r4 : ffe00000 [ 2.899479] r3 : f15cb814 r2 : 00000000 r1 : 00000000 r0 : 00000000 The issue only happens when dma mode is disabled or not supported on STB chip. The pio mode transfer calls brcmnand_read_data_bus function which dereferences ctrl->soc->read_data_bus. But the soc member in STB chip is NULL hence triggers the access violation. The function needs to check the soc pointer first. Fixes: 546e42599120 ("mtd: rawnand: brcmnand: Add BCMBCA read data bus interface") Reported-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20240320222623.35604-1-william.zhang@broadcom.com
2024-03-15mtd: rawnand: brcmnand: Add support for getting ecc setting from strapWilliam Zhang1-6/+77
BCMBCA broadband SoC based board design does not specify ecc setting in dts but rather use the SoC NAND strap info to obtain the ecc strength and spare area size setting. Add brcm,nand-ecc-use-strap dts propety for this purpose and update driver to support this option. However these two options can not be used at the same time. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: David Regan <dregan@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20240301173308.226004-1-william.zhang@broadcom.com
2024-03-15mtd: rawnand: brcmnand: Support write protection setting from dtsWilliam Zhang1-0/+4
The write protection feature is controlled by the module parameter wp_on with default set to enabled. But not all the board use this feature especially in BCMBCA broadband board. And module parameter is not sufficient as different board can have different option. Add a device tree property and allow this feature to be configured through the board dts on per board basis. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Kamal Dasu <kamal.dasu@broadcom.com> Reviewed-by: David Regan <dregan@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20240223034758.13753-14-william.zhang@broadcom.com
2024-03-15mtd: rawnand: brcmnand: Add BCMBCA read data bus interfaceWilliam Zhang1-3/+17
The BCMBCA broadband SoC integrates the NAND controller differently than STB, iProc and other SoCs. It has different endianness for NAND cache data. Add a SoC read data bus shim for BCMBCA to meet the specific SoC need and performance improvement using the optimized memcpy function on NAND cache memory. Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: David Regan <dregan@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20240223034758.13753-12-william.zhang@broadcom.com
2024-02-26mtd: rawnand: brcmnand: update log level messagesDavid Regan1-3/+3
Update log level messages so that more critical messages can be logged to console and help the troubleshooting with field devices. Signed-off-by: David Regan <dregan@broadcom.com> Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20240223034758.13753-4-william.zhang@broadcom.com
2024-02-26mtd: rawnand: brcmnand: fix style issuesWilliam Zhang1-12/+11
Fix various style issues. Signed-off-by: David Regan <dregan@broadcom.com> Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20240223034758.13753-3-william.zhang@broadcom.com
2024-02-26mtd: rawnand: brcmnand: exec_op helper functions return type fixesDavid Regan1-4/+8
Fix return types for exec_op reset and status helper functions. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Closes: http://lists.infradead.org/pipermail/linux-mtd/2023-December/102423.html Fixes: 3c8260ce7663 ("mtd: rawnand: brcmnand: exec_op implementation") Signed-off-by: David Regan <dregan@broadcom.com> Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20240223034758.13753-2-william.zhang@broadcom.com
2023-12-04mtd: rawnand: brcmnand: exec_op implementationDavid Regan1-223/+168
exec_op implementation for Broadcom STB, Broadband and iProc SoC This adds exec_op and removes the legacy interface. Based on changes proposed by Boris Brezillon. Link: https://github.com/bbrezillon/linux/commit/4ec6f8d8d83f5aaca5d1877f02d48da96d41fcba Link: https://github.com/bbrezillon/linux/commit/11b4acffd761c4928652d7028d19fcd6f45e4696 Signed-off-by: David Regan <dregan@broadcom.com> [Miquel Raynal: Misc style fixes] Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231125012438.15191-4-dregan@broadcom.com
2023-12-04mtd: rawnand: brcmnand: pass host struct to bcmnand_ctrl_poll_statusDavid Regan1-6/+7
Pass host struct to bcmnand_ctrl_poll_status instead of ctrl struct since real time status requires host, and ctrl is a member of host. Real time status is required for low level commands vs cached status since the NAND controller will not do an automatic status read at the end of a low level command as it would with a high level command. Signed-off-by: David Regan <dregan@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231125012438.15191-3-dregan@broadcom.com
2023-11-13mtd: rawnand: brcmnand: Convert to platform remove callback returning voidUwe Kleine-König1-3/+1
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). By changing the function brcmnand_remove() to return void several drivers that use this function as remove callback can be converted to .remove_new(). Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20231102220246.3336154-7-u.kleine-koenig@pengutronix.de
2023-08-18mtd: rawnand: Propagate error and simplify ternary operators for ↵Ruan Jinjie1-3/+4
brcmstb_nand_wait_for_completion() As bcmnand_ctrl_poll_status() return negative errno, so return true if sts < 0. The < 0 case does not exist for wait_for_completion_timeout(), so return true if sts = 0 and zero otherwise. Both of the true return of them can be considered as a -ETIMEDOUT err, so return -ETIMEDOUT if err is true to propagate err from its caller. Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Reviewed-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230808032943.3890545-1-ruanjinjie@huawei.com
2023-07-27mtd: rawnand: brcmnand: propagate init error -EPROBE_DEFER upRafał Miłecki1-0/+4
MTD subsystem may return -EPROBE_DEFER if something isn't ready yet. It's important to pass that error up so device will get probed later. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Acked-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230719084324.14799-1-zajec5@gmail.com
2023-07-12mtd: rawnand: brcmnand: Fix mtd oobsizeWilliam Zhang1-2/+5
brcmnand controller can only access the flash spare area up to certain bytes based on the ECC level. It can be less than the actual flash spare area size. For example, for many NAND chip supporting ECC BCH-8, it has 226 bytes spare area. But controller can only uses 218 bytes. So brcmand driver overrides the mtd oobsize with the controller's accessible spare area size. When the nand base driver utilizes the nand_device object, it resets the oobsize back to the actual flash spare aprea size from nand_memory_organization structure and controller may not able to access all the oob area as mtd advises. This change fixes the issue by overriding the oobsize in the nand_memory_organization structure to the controller's accessible spare area size. Fixes: a7ab085d7c16 ("mtd: rawnand: Initialize the nand_device object") Signed-off-by: William Zhang <william.zhang@broadcom.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230706182909.79151-6-william.zhang@broadcom.com
2023-07-12mtd: rawnand: brcmnand: Fix potential out-of-bounds access in oob writeWilliam Zhang1-2/+16
When the oob buffer length is not in multiple of words, the oob write function does out-of-bounds read on the oob source buffer at the last iteration. Fix that by always checking length limit on the oob buffer read and fill with 0xff when reaching the end of the buffer to the oob registers. Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230706182909.79151-5-william.zhang@broadcom.com
2023-07-12mtd: rawnand: brcmnand: Fix crash during the panic_writeWilliam Zhang1-1/+11
When executing a NAND command within the panic write path, wait for any pending command instead of calling BUG_ON to avoid crashing while already crashing. Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Kursad Oney <kursad.oney@broadcom.com> Reviewed-by: Kamal Dasu <kamal.dasu@broadcom.com> Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230706182909.79151-4-william.zhang@broadcom.com
2023-07-12mtd: rawnand: brcmnand: Fix potential false time out warningWilliam Zhang1-0/+8
If system is busy during the command status polling function, the driver may not get the chance to poll the status register till the end of time out and return the premature status. Do a final check after time out happens to ensure reading the correct status. Fixes: 9d2ee0a60b8b ("mtd: nand: brcmnand: Check flash #WP pin status before nand erase/program") Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230706182909.79151-3-william.zhang@broadcom.com
2023-07-12mtd: rawnand: brcmnand: Fix ECC level field setting for v7.2 controllerWilliam Zhang1-33/+41
v7.2 controller has different ECC level field size and shift in the acc control register than its predecessor and successor controller. It needs to be set specifically. Fixes: decba6d47869 ("mtd: brcmnand: Add v7.2 controller support") Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230706182909.79151-2-william.zhang@broadcom.com
2022-03-23Merge tag 'nand/for-5.18' into mtd/nextMiquel Raynal1-52/+108
Raw NAND core changes: * Rework of_get_nand_bus_width() * Remove of_get_nand_on_flash_bbt() wrapper * Protect access to rawnand devices while in suspend * bindings: Document the wp-gpios property Rax NAND controller driver changes: * atmel: Fix refcount issue in atmel_nand_controller_init * nandsim: - Add NS_PAGE_BYTE_SHIFT macro to replace the repeat pattern - Merge repeat codes in ns_switch_state - Replace overflow check with kzalloc to single kcalloc * rockchip: Fix platform_get_irq.cocci warning * stm32_fmc2: Add NAND Write Protect support * pl353: Set the nand chip node as the flash node * brcmnand: Fix sparse warnings in bcma_nand * omap_elm: Remove redundant variable 'errors' * gpmi: - Support fast edo timings for mx28 - Validate controller clock rate - Fix controller timings setting * brcmnand: - Add BCMA shim - BCMA controller uses command shift of 0 - Allow platform data instantation - Add platform data structure for BCMA - Allow working without interrupts - Move OF operations out of brcmnand_init_cs() - Avoid pdev in brcmnand_init_cs() - Allow SoC to provide I/O operations - Assign soc as early as possible Onenand changes: * Check for error irq Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2022-03-18Merge tag 'spi-nor/for-5.18' into mtd/nextMiquel Raynal1-1/+1
SPI NOR core changes: - move vendor specific code out of the core into vendor drivers. - unify all function and object names in the vendor modules. - make setup() callback optional to improve readability. - skip erase logic when the SPI_NOR_NO_ERASE flag is set at flash declaration. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2022-01-31mtd: rawnand: Fix misuses of of_match_node()Miquel Raynal1-1/+1
On non-OF enabled platforms (CONFIG_OF is not set), of_match_node() will expand to NULL. The of_device_id array pointed by the macro will then be left unused. Let's mark the array __maybe_unused in this case to prevent compiler warnings. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/linux-mtd/20220127110802.1064963-1-miquel.raynal@bootlin.com
2022-01-31mtd: rawnand: brcmnand: Fixed incorrect sub-page ECC statusdavid regan1-1/+1
The brcmnand driver contains a bug in which if a page (example 2k byte) is read from the parallel/ONFI NAND and within that page a subpage (512 byte) has correctable errors which is followed by a subpage with uncorrectable errors, the page read will return the wrong status of correctable (as opposed to the actual status of uncorrectable.) The bug is in function brcmnand_read_by_pio where there is a check for uncorrectable bits which will be preempted if a previous status for correctable bits is detected. The fix is to stop checking for bad bits only if we already have a bad bits status. Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by: david regan <dregan@mail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/trinity-478e0c09-9134-40e8-8f8c-31c371225eda-1643237024774@3c-app-mailcom-lxa02
2022-01-23mtd: rawnand: brcmnand: Add BCMA shimFlorian Fainelli1-0/+4
Add a BCMA shim to allow us to register the brcmnand driver using the BCMA bus which provides indirect memory mapped access to SoC registers. There are a number of registers that need to be byte swapped because they are natively big endian, coming directly from the NAND chip, and there is no bus interface unlike the iProc or STB platforms that performs the byte swapping for us. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220107184614.2670254-10-f.fainelli@gmail.com
2022-01-23mtd: rawnand: brcmnand: BCMA controller uses command shift of 0Florian Fainelli1-0/+6
For some odd and unexplained reason the BCMA NAND controller, albeit revision 3.4 uses a command shift of 0 instead of 24 as it should be, quirk that. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220107184614.2670254-9-f.fainelli@gmail.com
2022-01-23mtd: rawnand: brcmnand: Allow platform data instantationFlorian Fainelli1-10/+35
Make use of the recently refactored code in brcmnand_init_cs() and derive the chip-select from the platform data that is supplied. Update the various code paths to avoid relying on possibly non-existent resources, too. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220107184614.2670254-8-f.fainelli@gmail.com
2022-01-23mtd: rawnand: brcmnand: Allow working without interruptsFlorian Fainelli1-28/+24
The BCMA devices include the brcmnand controller but they do not wire up any interrupt line, allow the main interrupt to be optional and update the completion path to also check for the lack of an interrupt line. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220107184614.2670254-6-f.fainelli@gmail.com
2022-01-23mtd: rawnand: brcmnand: Move OF operations out of brcmnand_init_cs()Florian Fainelli1-9/+11
In order to initialize a given chip select object for use by the brcmnand driver, move all of the Device Tree specific routines outside of brcmnand_init_cs() in order to make it usable in a platform data configuration which will be necessary for supporting BCMA chips. No functional changes introduced. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220107184614.2670254-5-f.fainelli@gmail.com
2022-01-23mtd: rawnand: brcmnand: Avoid pdev in brcmnand_init_cs()Florian Fainelli1-4/+4
In preparation for encapsulating more of what the loop calling brcmnand_init_cs() does, avoid using platform_device when it is the device behind platform_device that we are using for printing errors. No functional changes introduced. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220107184614.2670254-4-f.fainelli@gmail.com
2022-01-23mtd: rawnand: brcmnand: Allow SoC to provide I/O operationsFlorian Fainelli1-2/+26
Allow a brcmnand_soc instance to provide a custom set of I/O operations which we will require when using this driver on a BCMA bus which is not directly memory mapped I/O. Update the nand_{read,write}_reg accordingly to use the SoC operations if provided. To minimize the penalty on other SoCs which do support standard MMIO accesses, we use a static key which is disabled by default and gets enabled if a soc implementation does provide I/O operations. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220107184614.2670254-3-f.fainelli@gmail.com
2022-01-23mtd: rawnand: brcmnand: Assign soc as early as possibleFlorian Fainelli1-2/+1
In order to key off the brcmnand_probe() code in subsequent changes depending upon ctrl->soc, assign that variable as early as possible, instead of much later when we have checked that it is non-NULL. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220107184614.2670254-2-f.fainelli@gmail.com
2021-03-28mtd: rawnand: brcmnand: move to polling in pio mode on oops writeKamal Dasu1-0/+4
This change makes sure that Broadcom NAND driver moves to interrupt polling on the first brcmnand_write() call. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210311170909.9031-2-kdasu.kdev@gmail.com
2021-03-28mtd: rawnand: brcmnand: read/write oob during EDU transferKamal Dasu1-7/+52
Added support to read/write oob during EDU transfers. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210311170909.9031-1-kdasu.kdev@gmail.com
2021-03-11mtd: rawnand: brcmnand: fix OOB R/W with Hamming ECCÁlvaro Fernández Rojas1-0/+6
Hamming ECC doesn't cover the OOB data, so reading or writing OOB shall always be done without ECC enabled. This is a problem when adding JFFS2 cleanmarkers to erased blocks. If JFFS2 clenmarkers are added to the OOB with ECC enabled, OOB bytes will be changed from ff ff ff to 00 00 00, reporting incorrect ECC errors. Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210224080210.23686-1-noltari@gmail.com
2020-11-20mtd: rawnand: brcmnand: Demote non-conformant kernel-doc headersLee Jones1-3/+3
Fixes the following W=1 kernel build warning(s): drivers/mtd/nand/raw/brcmnand/brcmnand.c:1854: warning: Function parameter or member 'host' not described in 'brcmnand_edu_trans' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1854: warning: Function parameter or member 'addr' not described in 'brcmnand_edu_trans' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1854: warning: Function parameter or member 'buf' not described in 'brcmnand_edu_trans' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1854: warning: Function parameter or member 'len' not described in 'brcmnand_edu_trans' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1854: warning: Function parameter or member 'cmd' not described in 'brcmnand_edu_trans' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1951: warning: Function parameter or member 'host' not described in 'brcmnand_fill_dma_desc' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1951: warning: Function parameter or member 'desc' not described in 'brcmnand_fill_dma_desc' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1951: warning: Function parameter or member 'addr' not described in 'brcmnand_fill_dma_desc' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1951: warning: Function parameter or member 'buf' not described in 'brcmnand_fill_dma_desc' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1951: warning: Function parameter or member 'len' not described in 'brcmnand_fill_dma_desc' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1951: warning: Function parameter or member 'dma_cmd' not described in 'brcmnand_fill_dma_desc' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1951: warning: Function parameter or member 'begin' not described in 'brcmnand_fill_dma_desc' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1951: warning: Function parameter or member 'end' not described in 'brcmnand_fill_dma_desc' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1951: warning: Function parameter or member 'next_desc' not described in 'brcmnand_fill_dma_desc' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1977: warning: Function parameter or member 'host' not described in 'brcmnand_dma_run' drivers/mtd/nand/raw/brcmnand/brcmnand.c:1977: warning: Function parameter or member 'desc' not described in 'brcmnand_dma_run' Cc: Brian Norris <computersforpeace@gmail.com> Cc: Kamal Dasu <kdasu.kdev@gmail.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: linux-mtd@lists.infradead.org Cc: bcm-kernel-feedback-list@broadcom.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201109182206.3037326-14-lee.jones@linaro.org
2020-09-28mtd: rawnand: Use nanddev_get/set_ecc_requirements() when relevantMiquel Raynal1-3/+5
Instead of accessing ->strength/step_size directly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-15-miquel.raynal@bootlin.com
2020-09-28mtd: rawnand: Use the new ECC engine type enumerationMiquel Raynal1-4/+4
Mechanical switch from the legacy "mode" enumeration to the new "engine type" enumeration in drivers and board files. The device tree parsing is also updated to return the new enumeration from the old strings. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-11-miquel.raynal@bootlin.com
2020-08-27mtd: rawnand: Rename the ECC algorithm enumeration itemsMiquel Raynal1-6/+6
NAND_ECC_ is not a meaningful prefix, use NAND_ECC_ALGO_ instead. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-3-miquel.raynal@bootlin.com
2020-06-26mtd: rawnand: brcmnand: ECC error handling on EDU transfersKamal Dasu1-0/+26
Implement ECC correctable and uncorrectable error handling for EDU reads. If ECC correctable bitflips are encountered on EDU transfer, read page again using PIO. This is needed due to a NAND controller limitation where corrected data is not transferred to the DMA buffer on ECC error. This applies to ECC correctable errors that are reported by the controller hardware based on set number of bitflips threshold in the controller threshold register, bitflips below the threshold are corrected silently and are not reported by the controller hardware. Fixes: a5d53ad26a8b ("mtd: rawnand: brcmnand: Add support for flash-edu for dma transfers") Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200612212902.21347-3-kdasu.kdev@gmail.com
2020-06-26mtd: rawnand: brcmnand: Don't default to edu transferKamal Dasu1-2/+3
When flash-dma is absent do not default to using flash-edu. Make sure flash-edu is enabled before setting EDU transfer function. Fixes: a5d53ad26a8b ("mtd: rawnand: brcmnand: Add support for flash-edu for dma transfers") Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200612212902.21347-2-kdasu.kdev@gmail.com
2020-06-01Merge tag 'nand/for-5.8' of ↵Richard Weinberger1-44/+120
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next Raw NAND core changes: * Stop using nand_release(), patched all drivers. * Give more information about the ECC weakness when not matching the chip's requirement. * MAINTAINERS updates. * Support emulated SLC mode on MLC NANDs. * Support "constrained" controllers, adapt the core and ONFI/JEDEC table parsing and Micron's code. * Take check_only into account. * Add an invalid ECC mode to discriminate with valid ones. * Return an enum from of_get_nand_ecc_algo(). * Drop OOB_FIRST placement scheme. * Introduce nand_extract_bits(). * Ensure a consistent bitflips numbering. * BCH lib: - Allow easy bit swapping. - Rework a little bit the exported function names. * Fix nand_gpio_waitrdy(). * Propage CS selection to sub operations. * Add a NAND_NO_BBM_QUIRK flag. * Give the possibility to verify a read operation is supported. * Add a helper to check supported operations. * Avoid indirect access to ->data_buf(). * Rename the use_bufpoi variables. * Fix comments about the use of bufpoi. * Rename a NAND chip option. * Reorder the nand_chip->options flags. * Translate obscure bitfields into readable macros. * Timings: - Fix default values. - Add mode information to the timings structure. Raw NAND controller driver changes: * Fixed many error paths. * Arasan - New driver * Au1550nd: - Various cleanups - Migration to ->exec_op() * brcmnand: - Misc cleanup. - Support v2.1-v2.2 controllers. - Remove unused including <linux/version.h>. - Correctly verify erased pages. - Fix Hamming OOB layout. * Cadence - Make cadence_nand_attach_chip static. * Cafe: - Set the NAND_NO_BBM_QUIRK flag * cmx270: - Remove this controller driver. * cs553x: - Misc cleanup - Migration to ->exec_op() * Davinci: - Misc cleanup. - Migration to ->exec_op() * Denali: - Add more delays before latching incoming data * Diskonchip: - Misc cleanup - Migration to ->exec_op() * Fsmc: - Change to non-atomic bit operations. * GPMI: - Use nand_extract_bits() - Fix runtime PM imbalance. * Ingenic: - Migration to exec_op() - Fix the RB gpio active-high property on qi, lb60 - Make qi_lb60_ooblayout_ops static. * Marvell: - Misc cleanup and small fixes * Nandsim: - Fix the error paths, driver wide. * Omap_elm: - Fix runtime PM imbalance. * STM32_FMC2: - Misc cleanups (error cases, comments, timeout valus, cosmetic changes).
2020-05-31mtd: rawnand: brcmnand: support v2.1-v2.2 controllersÁlvaro Fernández Rojas1-9/+76
v2.1: tested on Netgear DGND3700v1 (BCM6368) v2.2: tested on Netgear DGND3700v2 (BCM6362) Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200522121524.4161539-6-noltari@gmail.com
2020-05-31mtd: rawnand: brcmnand: rename page sizesÁlvaro Fernández Rojas1-2/+2
Current pages sizes apply to controllers after v3.4 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200522121524.4161539-4-noltari@gmail.com
2020-05-31mtd: rawnand: brcmnand: fix CS0 layoutÁlvaro Fernández Rojas1-2/+3
Only v3.3-v5.0 have a different CS0 layout. Controllers before v3.3 use the same layout for every CS. Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200522121524.4161539-3-noltari@gmail.com
2020-05-31mtd: rawnand: brcmnand: rename v4 registersÁlvaro Fernández Rojas1-4/+4
These registers are also used on v3.3. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200522121524.4161539-2-noltari@gmail.com
2020-05-31mtd: rawnand: brcmnand: Stop using nand_release()Miquel Raynal1-2/+8
This helper is not very useful and very often people get confused: they use nand_release() instead of nand_cleanup(). Let's stop using nand_release() by calling mtd_device_unregister() and nand_cleanup() directly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Kamal Dasu <kdasu.kdev@gmail.com> Link: https://lore.kernel.org/linux-mtd/20200519130035.1883-5-miquel.raynal@bootlin.com
2020-05-24mtd: rawnand: brcmnand: correctly verify erased pagesÁlvaro Fernández Rojas1-8/+11
The current code checks that the whole OOB area is erased. This is a problem when JFFS2 cleanmarkers are added to the OOB, since it will fail due to the usable OOB bytes not being 0xff. Correct this by only checking that data and ECC bytes aren't 0xff. Fixes: 02b88eea9f9c ("mtd: brcmnand: Add check for erased page bitflips") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200512082451.771212-1-noltari@gmail.com
2020-05-24mtd: rawnand: brcmnand: improve hamming oob layoutÁlvaro Fernández Rojas1-19/+16
The current code generates 8 oob sections: S1 1-5 ECC 6-8 S2 9-15 S3 16-21 ECC 22-24 S4 25-31 S5 32-37 ECC 38-40 S6 41-47 S7 48-53 ECC 54-56 S8 57-63 Change it by merging continuous sections: S1 1-5 ECC 6-8 S2 9-21 ECC 22-24 S3 25-37 ECC 38-40 S4 41-53 ECC 54-56 S5 57-63 Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200512075733.745374-3-noltari@gmail.com
2020-05-24mtd: rawnand: brcmnand: fix hamming oob layoutÁlvaro Fernández Rojas1-4/+7
First 2 bytes are used in large-page nand. Fixes: ef5eeea6e911 ("mtd: nand: brcm: switch to mtd_ooblayout_ops") Cc: stable@vger.kernel.org Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200512075733.745374-2-noltari@gmail.com
2020-05-19mtd:rawnand: brcmnand: Fix PM resume crashKamal Dasu1-2/+1
This change fixes crash observed on PM resume. This bug was introduced in the change made for flash-edu support. Fixes: a5d53ad26a8b ("mtd: rawnand: brcmnand: Add support for flash-edu for dma transfers") Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-05-11mtd: rawnand: Rename a NAND chip optionMiquel Raynal1-1/+1
NAND controller drivers can set the NAND_USE_BOUNCE_BUFFER flag to a chip 'option' field. With this flag, the core is responsible of providing DMA-able buffers. The current behavior is to not force the use of a bounce buffer when the core thinks this is not needed. So in the end the name is a bit misleading, because in theory we will always have a DMA buffer but in practice it will not always be a bounce buffer. Rename this flag NAND_USES_DMA to be more accurate. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200507105241.14299-4-miquel.raynal@bootlin.com
2020-05-10mtd: rawnand: brcmnand: Remove unused including <linux/version.h>YueHaibing1-1/+0
Remove including <linux/version.h> that don't need it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Reviewed-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200417101129.35556-1-yuehaibing@huawei.com
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-22 07:58:10 +0300