summaryrefslogtreecommitdiff
path: root/drivers/mtd/nand/raw/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2024-08-03memory: fsl_ifc: Make FSL_IFC config visible and selectableEsben Haabendal1-2/+1
[ Upstream commit 9ba0cae3cac07c21c583f9ff194f74043f90d29c ] While use of fsl_ifc driver with NAND flash is fine, as the fsl_ifc_nand driver selects FSL_IFC automatically, we need the CONFIG_FSL_IFC option to be selectable for platforms using fsl_ifc with NOR flash. Fixes: ea0c0ad6b6eb ("memory: Enable compile testing for most of the drivers") Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Esben Haabendal <esben@geanix.com> Link: https://lore.kernel.org/r/20240530-fsl-ifc-config-v3-1-1fd2c3d233dd@geanix.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-07-15mtd: rawnand: marvell: add support for AC5 SoCChris Packham1-1/+1
Add support for the AC5/AC5X SoC from Marvell. The NFC on this SoC only supports SDR modes up to 3. Marvell's SDK includes some predefined values for the ndtr registers. These haven't been incorporated as the existing code seems to get good values based on measurements taken with an oscilloscope. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230703035044.2063303-4-chris.packham@alliedtelesis.co.nz
2023-07-12nand: oxnas_nand: remove obsolete raw nand driverNeil Armstrong1-7/+0
Due to lack of maintenance and stall of development for a few years now, and since no new features will ever be added upstream, remove support for OX810 and OX820 nand. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230630-topic-oxnas-upstream-remove-v2-5-fb6ab3dea87c@linaro.org
2023-03-28mtd: rawnand: stm32_fmc2: depends on ARCH_STM32 instead of MACH_STM32MP157Christophe Kerello1-1/+1
To be able to compile the driver on all STM32MP SOCs, we move the "depends on" on ARCH_STM32. Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20230324155105.826063-3-christophe.kerello@foss.st.com
2023-02-26Merge tag 'mtd/for-6.3' of ↵Linus Torvalds1-7/+0
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Miquel Raynal: "MTD changes: - parsers: ofpart: add workaround for #size-cells 0 - dt-bindings: partitions: Fix partition node name pattern - dataflash: remove duplicate SPI ID table Raw NAND core changes: - Check the data only read pattern only once - Prepare the late addition of supported operation checks - Support for sequential cache reads - Fix nand_chip kdoc Raw NAND driver changes: - Fsl_elbc: Propagate HW ECC settings to HW - Marvell: Add missing layouts - Pasemi: Don't use static data to track per-device state - Sunxi: - Fix the size of the last OOB region - Remove an unnecessary check - Remove an unnecessary check - Clean up chips after failed init - Precompute the ECC_CTL register value - Embed sunxi_nand_hw_ecc by value - Update OOB layout to match hardware - tmio_nand: Remove driver - vf610_nfc: Use regular comments for functions SPI-NAND driver changes: - Add support for AllianceMemory AS5F34G04SND - Macronix: use scratch buffer for DMA operation NAND ECC changes: - Mediatek: - Add ECC support fot MT7986 IC - Add compatible for MT7986 - dt-bindings: Split ECC engine with rawnand controller SPI NOR changes: - Misc core fixes SPI NOR driver changes: - Spansion: Minor fixes" * tag 'mtd/for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (33 commits) mtd: parsers: ofpart: add workaround for #size-cells 0 mtd: rawnand: sunxi: Precompute the ECC_CTL register value mtd: rawnand: sunxi: Embed sunxi_nand_hw_ecc by value mtd: rawnand: sunxi: Update OOB layout to match hardware mtd: spi-nor: Sort headers alphabetically mtd: spi-nor: Fix shift-out-of-bounds in spi_nor_set_erase_type mtd: nand: ecc-mtk: Add ECC support fot MT7986 IC dt-bindings: mtd: mediatek,nand-ecc-engine: Add compatible for MT7986 dt-bindings: mtd: Split ECC engine with rawnand controller mtd: rawnand: fsl_elbc: Propagate HW ECC settings to HW mtd: spinand: Add support for AllianceMemory AS5F34G04SND dt-bindings: mtd: partitions: Fix partition node name pattern mtd: spi-nor: Create macros to define chip IDs and geometries mtd: spi-nor: spansion: Make CFRx reg fields generic mtd: spi-nor: spansion: Consider reserved bits in CFR5 register mtd: spi-nor: core: fix implicit declaration warning mtd: spinand: macronix: use scratch buffer for DMA operation mtd: rawnand: Fix nand_chip kdoc mtd: rawnand: vf610_nfc: use regular comments for functions mtd: rawnand: Support for sequential cache reads ...
2023-01-16ARM: s3c: remove s3c24xx specific hacksArnd Bergmann1-1/+1
A number of device drivers reference CONFIG_ARM_S3C24XX_CPUFREQ or similar symbols that are no longer available with the platform gone, though the drivers themselves are still used on newer platforms, so remove these hacks. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-01-07mtd: remove tmio_nand driverArnd Bergmann1-7/+0
With the TMIO MFD drivers gone, the NAND support is also obsolete and can be removed. Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2022-11-25mtd: rawnand: Drop obsolete dependencies on COMPILE_TESTJean Delvare1-3/+3
Since commit 0166dc11be91 ("of: make CONFIG_OF user selectable"), it is possible to test-build any driver which depends on OF on any architecture by explicitly selecting OF. Therefore depending on COMPILE_TEST as an alternative is no longer needed. It is actually better to always build such drivers with OF enabled, so that the test builds are closer to how each driver will actually be built on its intended target. Building them without OF may not test much as the compiler will optimize out potentially large parts of the code. In the worst case, this could even pop false positive warnings. Dropping COMPILE_TEST here improves the quality of our testing and avoids wasting time on non-existent issues. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: Naga Sureshkumar Relli <nagasure@xilinx.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20221124115946.5edb771c@endymion.delvare
2022-09-21mtd: rawnand: meson: stop supporting legacy clocksLiang Yang1-1/+1
meson NFC driver only uses common clock interfaces, which triggers kernel test robot errors when using legacy clocks with HAVE_LEGACY_CLK on. Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Liang Yang <liang.yang@amlogic.com> [miquel.raynal@bootlin.com: Rephrase the commit log] Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220907080405.28240-6-liang.yang@amlogic.com
2022-09-21mtd: rawnand: brcmnand: Move Kconfig to driver folderFlorian Fainelli1-21/+1
In preparation for allowing each of the brcmnand stub to be built separately, move the Kconfig entry to the driver folder. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220711222323.4048197-2-f.fainelli@gmail.com
2022-04-27mtd: nand: make mtk_ecc.c a separated moduleChuanhong Guo1-0/+1
this code will be used in mediatek snfi spi-mem controller with pipelined ECC engine. Signed-off-by: Chuanhong Guo <gch981213@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220424032527.673605-2-gch981213@gmail.com
2022-03-25Merge tag 'mtd/changes-for-5.18' of ↵Linus Torvalds1-0/+13
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Miquel Raynal: "There has been a lot of activity in the MTD subsystem recently, with a number of SPI-NOR cleanups as well as the introduction of ECC engines that can be used by SPI controllers (hence a few SPI patches in here). Core MTD changes: - Replace the expert mode symbols with a single helper - Fix misuses of of_match_ptr() - Remove partid and partname debugfs files - tests: Fix eraseblock read speed miscalculation for lower partition sizes - TRX parser: Allow to use on MediaTek MIPS SoCs MTD driver changes: - spear_smi: use GFP_KERNEL - mchp48l640: Add SPI ID table - mchp23k256: Add SPI ID table - blkdevs: Avoid soft lockups with some mtd/spi devices - aspeed-smc: Improve probe resilience Hyperbus changes: - HBMC_AM654 should depend on ARCH_K3 NAND core changes: - ECC: - Add infrastructure to support hardware engines - Add a new helper to retrieve the ECC context - Provide a helper to retrieve a pilelined engine device NAND-ECC changes: - Macronix ECC engine: - Add Macronix external ECC engine support - Support SPI pipelined mode - Make two read-only arrays static const - Fix compile test issue Raw NAND core changes: - Fix misuses of of_match_node() - Rework of_get_nand_bus_width() - Remove of_get_nand_on_flash_bbt() wrapper - Protect access to rawnand devices while in suspend - bindings: Document the wp-gpios property Rax NAND controller driver changes: - atmel: Fix refcount issue in atmel_nand_controller_init - nandsim: - Add NS_PAGE_BYTE_SHIFT macro to replace the repeat pattern - Merge repeat codes in ns_switch_state - Replace overflow check with kzalloc to single kcalloc - rockchip: Fix platform_get_irq.cocci warning - stm32_fmc2: Add NAND Write Protect support - pl353: Set the nand chip node as the flash node - brcmnand: Fix sparse warnings in bcma_nand - omap_elm: Remove redundant variable 'errors' - gpmi: - Support fast edo timings for mx28 - Validate controller clock rate - Fix controller timings setting - brcmnand: - Add BCMA shim - BCMA controller uses command shift of 0 - Allow platform data instantation - Add platform data structure for BCMA - Allow working without interrupts - Move OF operations out of brcmnand_init_cs() - Avoid pdev in brcmnand_init_cs() - Allow SoC to provide I/O operations - Assign soc as early as possible Onenand changes: - Check for error irq SPI-NAND core changes: - Delay a little bit the dirmap creation - Create direct mapping descriptors for ECC operations SPI-NAND driver changes: - macronix: Use random program load SPI NOR core changes: - Move vendor specific code out of the core into vendor drivers. - Unify all function and object names in the vendor modules. - Make setup() callback optional to improve readability. - Skip erase logic when the SPI_NOR_NO_ERASE flag is set at flash declaration. SPI changes: - Macronix SPI controller: - Fix the transmit path - Create a helper to configure the controller before an operation - Create a helper to ease the start of an operation - Add support for direct mapping - Add support for pipelined ECC operations - spi-mem: - Introduce a capability structure - Check the controller extra capabilities - cadence-quadspi/mxic: Provide capability structures - Kill the spi_mem_dtr_supports_op() helper - Add an ecc parameter to the spi_mem_op structure Binding changes: - Dropped mtd/cortina,gemini-flash.txt - Convert BCM47xx partitions to json-schema - Vendor prefixes: Clarify Macronix prefix - SPI NAND: Convert spi-nand description file to yaml - Raw NAND chip: Create a NAND chip description - Raw NAND controller: - Harmonize the property types - Fix a comment in the examples - Fix the reg property description - Describe Macronix NAND ECC engine - Macronix SPI controller: - Document the nand-ecc-engine property - Convert to yaml - The interrupt property is not mandatory" * tag 'mtd/changes-for-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (104 commits) mtd: nand: ecc: mxic: Fix compile test issue mtd: nand: mxic-ecc: make two read-only arrays static const mtd: hyperbus: HBMC_AM654 should depend on ARCH_K3 mtd: core: Remove partid and partname debugfs files dt-bindings: mtd: partitions: convert BCM47xx to the json-schema mtd: tests: Fix eraseblock read speed miscalculation for lower partition sizes mtd: rawnand: atmel: fix refcount issue in atmel_nand_controller_init mtd: rawnand: rockchip: fix platform_get_irq.cocci warning mtd: spi-nor: Skip erase logic when SPI_NOR_NO_ERASE is set mtd: spi-nor: renumber flags mtd: spi-nor: slightly change code style in spi_nor_sr_ready() mtd: spi-nor: spansion: rename vendor specific functions and defines mtd: spi-nor: spansion: convert USE_CLSR to a manufacturer flag mtd: spi-nor: move all spansion specifics into spansion.c mtd: spi-nor: spansion: slightly rework control flow in late_init() mtd: spi-nor: micron-st: rename vendor specific functions and defines mtd: spi-nor: micron-st: convert USE_FSR to a manufacturer flag mtd: spi-nor: move all micron-st specifics into micron-st.c mtd: spi-nor: xilinx: correct the debug message mtd: spi-nor: xilinx: rename vendor specific functions and defines ...
2022-03-23Merge tag 'nand/for-5.18' into mtd/nextMiquel Raynal1-0/+13
Raw NAND core changes: * Rework of_get_nand_bus_width() * Remove of_get_nand_on_flash_bbt() wrapper * Protect access to rawnand devices while in suspend * bindings: Document the wp-gpios property Rax NAND controller driver changes: * atmel: Fix refcount issue in atmel_nand_controller_init * nandsim: - Add NS_PAGE_BYTE_SHIFT macro to replace the repeat pattern - Merge repeat codes in ns_switch_state - Replace overflow check with kzalloc to single kcalloc * rockchip: Fix platform_get_irq.cocci warning * stm32_fmc2: Add NAND Write Protect support * pl353: Set the nand chip node as the flash node * brcmnand: Fix sparse warnings in bcma_nand * omap_elm: Remove redundant variable 'errors' * gpmi: - Support fast edo timings for mx28 - Validate controller clock rate - Fix controller timings setting * brcmnand: - Add BCMA shim - BCMA controller uses command shift of 0 - Allow platform data instantation - Add platform data structure for BCMA - Allow working without interrupts - Move OF operations out of brcmnand_init_cs() - Avoid pdev in brcmnand_init_cs() - Allow SoC to provide I/O operations - Assign soc as early as possible Onenand changes: * Check for error irq Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2022-03-07mtd: rawnand: omap2: Actually prevent invalid configuration and build errorRoger Quadros1-2/+1
The root of the problem is that we are selecting symbols that have dependencies. This can cause random configurations that can fail. The cleanest solution is to avoid using select. This driver uses interfaces from the OMAP_GPMC driver so we have to depend on it instead. Fixes: 4cd335dae3cf ("mtd: rawnand: omap2: Prevent invalid configuration and build error") Signed-off-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/linux-mtd/20220219193600.24892-1-rogerq@kernel.org
2022-01-25mtd: rawnand: omap2: Prevent invalid configuration and build errorRoger Quadros1-1/+2
We need to select MEMORY as well otherwise OMAP_GPMC will not be built. For simplicity let's select MEMORY and OMAP_GPMC unconditionally as this driver depends on OMAP_GPMC driver and uses symbols from there. Fixes: dbcb124acebd ("mtd: rawnand: omap2: Select GPMC device driver for ARCH_K3") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220118123525.8020-1-rogerq@kernel.org
2022-01-23mtd: rawnand: brcmnand: Add BCMA shimFlorian Fainelli1-0/+13
Add a BCMA shim to allow us to register the brcmnand driver using the BCMA bus which provides indirect memory mapped access to SoC registers. There are a number of registers that need to be byte swapped because they are natively big endian, coming directly from the NAND chip, and there is no bus interface unlike the iProc or STB platforms that performs the byte swapping for us. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220107184614.2670254-10-f.fainelli@gmail.com
2022-01-14Merge tag 'mips_5.17' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS updates from Thomas Bogendoerfer: - add support for more BCM47XX based devices - add MIPS support for brcmstb PCIe controller - add Loongson 2K1000 reset driver - remove board support for rbtx4938/rbtx4939 - remove support for TX4939 SoCs - fixes and cleanups * tag 'mips_5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (59 commits) MIPS: ath79: drop _machine_restart again PCI: brcmstb: Augment driver for MIPs SOCs MIPS: bmips: Remove obsolete DMA mapping support MIPS: bmips: Add support PCIe controller device nodes dt-bindings: PCI: Add compatible string for Brcmstb 74[23]5 MIPs SOCs MIPS: compressed: Fix build with ZSTD compression MIPS: BCM47XX: Add support for Netgear WN2500RP v1 & v2 MIPS: BCM47XX: Add support for Netgear R6300 v1 MIPS: BCM47XX: Add LEDs and buttons for Asus RTN-10U MIPS: BCM47XX: Add board entry for Linksys WRT320N v1 MIPS: BCM47XX: Define Linksys WRT310N V2 buttons MIPS: Remove duplicated include in local.h MIPS: retire "asm/llsc.h" MIPS: rework local_t operation on MIPS64 MIPS: fix local_{add,sub}_return on MIPS64 mips/pci: remove redundant ret variable MIPS: Loongson64: Add missing of_node_put() in ls2k_reset_init() MIPS: new Kconfig option ZBOOT_LOAD_ADDRESS MIPS: enable both vmlinux.gz.itb and vmlinuz for generic MIPS: signal: Return immediately if call fails ...
2022-01-11Merge tag 'mtd/for-5.17' of ↵Linus Torvalds1-1/+9
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Miquel Raynal: "MTD core changes: - mtdchar: Prevent unbounded allocation in MEMWRITE ioctl - gen_probe: Use bitmap_zalloc() when applicable - Introduce an expert mode for forensics and debugging purposes - Clear out unregistered devices a bit more - Provide unique name for nvmem device - Remove unused header file <linux/mtd/latch-addr-flash.h> - Fixed breaking list in __mtd_del_partition. MTD device changes: - Warn about failure to unregister mtd device in sst25l, mchp48l640, mchp23k256, and dataflash drivers. Raw NAND core changes: - Export nand_read_page_hwecc_oob_first() GPMC memory controller for OMAP2 NAND controller changes: - Add support for AM64 SoC and allow build on K3 platforms - Use a compatible match table when checking for NAND controller - Use platform_get_irq() to get the interrupt Raw NAND controller changes: - OMAP2 NAND controller: - Document the missing 'rb-gpios' DT property - Drop unused variable - Fix force_8bit flag behaviour for DMA mode - Move to exec_op interface - Use platform_get_irq() to get the interrupt - Renesas: - Add new NAND controller driver with its bindings and MAINTAINERS entry - Onenand: - Remove redundant variable ooblen - MPC5121: - Remove unused variable in ads5121_select_chip() - GPMI: - Add ERR007117 protection for nfc_apply_timings - Remove explicit default gpmi clock setting for i.MX6 - Use platform_get_irq_byname() to get the interrupt - Remove unneeded variable - Ingenic: - JZ4740 needs 'oob_first' read page function - Davinci: - Rewrite function description - Avoid duplicated page read - Don't calculate ECC when reading page SPI NOR core changes: - Add Pratyush as SPI NOR co-maintainer. - Flash parameters initialization was done in a spaghetti way. Clean flash parameters initialization. - Rework the flash_info flags and clarify where one should be used. - Initialize all flash parameters based on JESD216 SFDP where possible. Flash parameters and settings that are SFDP discoverable should not be duplicated via flash_info flags at flash declaration. - Remove debugfs entries that duplicate sysfs entries. SPI NOR manufacturer driver changes: - Use late_init() hook in various drivers to make it clear that those flash parameters are either not declared in the JESD216 SFDP standard, or the SFDP tables which define those flash parameters are not defined by the flash. - Fix mtd size for s3an flashes. - Write 2 bytes when disabling Octal DTR mode: 1 byte long transactions are not allowed in 8D-8D-8D mode. Hyperbus changes: - Couple of fixes in Renesas hyperbus rpc-if driver to avoid crash on module remove and for missing check for error value in probe" * tag 'mtd/for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (71 commits) mtd: spi-nor: Remove debugfs entries that duplicate sysfs entries mtd: spi-nor: micron-st: write 2 bytes when disabling Octal DTR mode mtd: spi-nor: spansion: write 2 bytes when disabling Octal DTR mode mtd: spi-nor: core: use 2 data bytes for template ops mtd: spi-nor: Constify part specific fixup hooks mtd: spi-nor: core: Remove reference to spi-nor.c mtd: rawnand: gpmi: Use platform_get_irq_byname() to get the interrupt mtd: rawnand: omap_elm: Use platform_get_irq() to get the interrupt mtd: rawnand: omap2: Select GPMC device driver for ARCH_K3 memory: omap-gpmc: Use a compatible match table when checking for NAND controller memory: omap-gpmc: Add support for GPMC on AM64 SoC dt-bindings: memory-controllers: ti,gpmc: Add compatible for AM64 memory: omap-gpmc: Use platform_get_irq() to get the interrupt MAINTAINERS: Add an entry for Renesas NAND controller mtd: rawnand: renesas: Add new NAND controller driver dt-bindings: mtd: renesas: Describe Renesas R-Car Gen3 & RZ/N1 NAND controller mtd: rawnand: gpmi: remove unneeded variable mtd: rawnand: omap2: drop unused variable mtd: rawnand: omap2: fix force_8bit flag behaviour for DMA mode mtd: rawnand: omap2: Add compatible for AM64 SoC ...
2022-01-02MIPS: TXX9: Remove TX4939 SoC supportThomas Bogendoerfer1-1/+1
After removal of RBTX4939 board support remove code for the TX4939 SoC. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
2021-12-31Merge tag 'memory-controller-drv-omap-5.17' into nand/nextMiquel Raynal1-0/+1
Memory controller drivers for v5.17 - OMAP GPMC 1. Add support for AM64 SoC. 2. Minor improvement: use platform_get_irq(). [miquel.raynal@bootlin.com: A first commit introduced a new omap compatible and another moved the IDs to a header which created a conflict: moving the new ID as well in the header fixed it.] Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2021-12-22mtd: rawnand: omap2: Select GPMC device driver for ARCH_K3Roger Quadros1-0/+1
The GPMC device driver is required for NAND controller to work on K3 Architecture. Select it if required. Signed-off-by: Roger Quadros <rogerq@kernel.org> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20211221131757.2030-5-rogerq@kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-12-21mtd: rawnand: renesas: Add new NAND controller driverMiquel Raynal1-0/+7
Introduce Renesas NAND controller driver which currently supports the following features on R-Car Gen3 and RZ/N1 SoCs: - All ONFI timing modes - Different configurations of its internal ECC controller - On-die (not tested) and software ECC support - Several chips (not tested) - Subpage accesses - DMA and PIO This controller was originally provided by Evatronix before being bought by Cadence. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Ralph Siemsen <ralph.siemsen@linaro.org> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/linux-mtd/20211217142033.353599-3-miquel.raynal@bootlin.com
2021-12-17mtd: rawnand: omap2: Allow build on K3 platformsRoger Quadros1-1/+1
K3 platforms come with GPMC. Enable GPMC build for K3 platforms. Signed-off-by: Roger Quadros <rogerq@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20211209090458.24830-3-rogerq@kernel.org
2021-12-03mtd: rawnand: denali: Add the dependency on HAS_IOMEMCai Huoqing1-1/+1
The helper function devm_platform_ioremap_resource_xxx() needs HAS_IOMEM enabled, so add the dependency on HAS_IOMEM. Fixes: 5f14a8ca1b49 ("mtd: rawnand: denali: Make use of the helper function devm_platform_ioremap_resource_byname()") Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20211109134758.417-1-caihuoqing@baidu.com
2021-07-16mtd: rawnand: Fix a couple of spelling mistakes in KconfigColin Ian King1-2/+2
There are two spelling mistakes in the Kconfig text. Fix them. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210704094705.37175-1-colin.king@canonical.com
2021-06-18mtd: rawnand: pl353: Add support for the ARM PL353 SMC NAND controllerMiquel Raynal1-0/+8
This hardware controller is embedded in XilinX Zynq-7000 SoCs and has partial support for Hamming ECC correction. This work is inspired from the original contributions of Punnaiah Choudary Kalluri and Naga Sureshkumar Relli. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Michael Walle <michael@walle.cc> [on zynq-7000] Link: https://lore.kernel.org/linux-mtd/20210610082040.2075611-19-miquel.raynal@bootlin.com
2021-02-22Merge tag 'mtd/for-5.12' of ↵Linus Torvalds1-7/+0
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Richard Weinberger: "MTD core changes: - Initial support for BCM4908 partitions Raw NAND controller drivers: - Intel: Fix an error handling path in 'ebu_dma_start()' - Tango: Remove the driver - Marvell: Convert comma to semicolon - MXC: Convert comma to semicolon - Qcom: Add support for Qcom SMEM parser Related MTD changes: - parsers: Add Qcom SMEM parser SPI NOR core changes: - Add non-uniform erase fixes. - Add Global Block Unlock command. It is defined by few flash vendors, and it is used for now just by sst. SPI NOR controller drivers changes: - intel-spi: Add support for Intel Alder Lake-P SPI serial flash. - hisi-sfc: Put child node np on error path" * tag 'mtd/for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (23 commits) dt-bindings: mtd: add binding for BCM4908 partitions dt-bindings: mtd: move partition binding to its own file mtd: spi-nor: sst: Add support for Global Unlock on sst26vf mtd: spi-nor: Add Global Block Unlock command mtd: spi-nor: core: Add erase size check for erase command initialization mtd: spi-nor: core: Fix erase type discovery for overlaid region mtd: spi-nor: sfdp: Fix last erase region marking mtd: spi-nor: sfdp: Fix wrong erase type bitmask for overlaid region mtd: rawnand: intel: Fix an error handling path in 'ebu_dma_start()' mtd: rawnand: tango: Remove the driver mtd: rawnand: marvell: convert comma to semicolon mtd: st_spi_fsm: convert comma to semicolon mtd: convert comma to semicolon mtd: parsers: afs: Fix freeing the part name memory in failure mtd: parser: imagetag: fix error codes in bcm963xx_parse_imagetag_partitions() mtd: phram: use div_u64_rem to stop overwrite len in phram_setup mtd: remove redundant assignment to pointer eb mtd: spi-nor: hisi-sfc: Put child node np on error path mtd: spi-nor: intel-spi: Add support for Intel Alder Lake-P SPI serial flash mtd: rawnand: qcom: Add support for Qcom SMEM parser ...
2021-02-01mtd: rawnand: tango: Remove the driverArnd Bergmann1-7/+0
The tango platform is getting removed [1], so the driver is no longer needed. [1] https://lore.kernel.org/linux-arm-kernel/20210120124812.2800027-1-arnd@kernel.org/T/ Cc: Marc Gonzalez <marc.w.gonzalez@free.fr> Cc: Mans Rullgard <mans@mansr.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20210120150555.1610132-1-arnd@kernel.org
2021-01-20ARM: remove u300 platformArnd Bergmann1-2/+1
The Ericsson U300 platform was one of two ARM929 based SoC platforms for mobile phones in ST-Ericsson after the merger of Ericsson with ST-NXP into ST-Ericsson, the other one being the ST Nomadik. The platform was not widely adopted in Linux based systems and was replaced with the far superior ST-Ericsson U8500 in 2011, but Linus Walleij kept maintaining the code for the whole time. Linus continues to use the Nomadik machine, but decided to drop u300 from the kernel as part of this year's spring cleaning. Thanks for having maintained it all these years. Cc: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/lkml/CACRpkdbJkiHR9FSfJTH_5d_qRU1__dRXHM1TL40iqNRKbGQfrQ@mail.gmail.com/ Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-11mtd: rawnand: rockchip: NFC driver for RK3308, RK2928 and othersYifeng Zhao1-0/+12
This driver supports Rockchip NFC (NAND Flash Controller) found on RK3308, RK2928, RKPX30, RV1108 and other SOCs. The driver has been tested using 8-bit NAND interface on the ARM based RK3308 platform. Support Rockchip SoCs and NFC versions: - PX30 and RK3326(NFCv900). ECC: 16/40/60/70 bits/1KB. CLOCK: ahb and nfc. - RK3308 and RV1108(NFCv800). ECC: 16 bits/1KB. CLOCK: ahb and nfc. - RK3036 and RK3128(NFCv622). ECC: 16/24/40/60 bits/1KB. CLOCK: ahb and nfc. - RK3066, RK3188 and RK2928(NFCv600). ECC: 16/24/40/60 bits/1KB. CLOCK: ahb. Supported features: - Read full page data by DMA. - Support HW ECC(one step is 1KB). - Support 2 - 32K page size. - Support 8 CS(depend on SoCs) Limitations: - No support for the ecc step size is 512. - Untested on some SoCs. - No support for subpages. - No support for the builtin randomizer. - The original bad block mask is not supported. It is recommended to use the BBT(bad block table). Suggested-by: Johan Jonker <jbx6244@gmail.com> Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201210002134.5686-3-yifeng.zhao@rock-chips.com
2020-12-11mtd: rawnand: Add NAND controller support on Intel LGM SoCRamuthevar Vadivel Murugan1-0/+8
This patch adds the new IP of Nand Flash Controller(NFC) support on Intel's Lightning Mountain(LGM) SoC. DMA is used for burst data transfer operation, also DMA HW supports aligned 32bit memory address and aligned data access by default. DMA burst of 8 supported. Data register used to support the read/write operation from/to device. Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@linux.intel.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201110012333.18647-3-vadivel.muruganx.ramuthevar@linux.intel.com
2020-12-11mtd: rawnand: mxc: Remove platform data supportFabio Estevam1-1/+1
i.MX is a devicetree-only platform now and the existing platform data support in this driver was only useful for old non-devicetree platforms. Get rid of the platform data support since it is no longer used. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201110121908.19400-1-festevam@gmail.com
2020-12-11mtd: nand: ecc-hamming: Let the software Hamming ECC engine be unselectedMiquel Raynal1-1/+1
There is no reason to always embed the software Hamming ECC engine implementation. By default it is (with raw NAND), but we can let the user decide. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-19-miquel.raynal@bootlin.com
2020-12-11mtd: nand: ecc-hamming: Move Hamming code to the generic NAND layerMiquel Raynal1-11/+0
Hamming ECC code might be later re-used by the SPI NAND layer. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-12-miquel.raynal@bootlin.com
2020-11-30mtd: nand: ecc-bch: Move BCH code to the generic NAND layerMiquel Raynal1-10/+0
BCH ECC code might be later re-used by the SPI NAND layer. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200929230124.31491-3-miquel.raynal@bootlin.com
2020-09-28mtd: rawnand: Make use of the ECC frameworkMiquel Raynal1-0/+1
Just enable the ECC framework with raw NAND so that we can drop, one by one, all the unnecessary/redundant definitions. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200827085208.16276-17-miquel.raynal@bootlin.com
2020-08-07Merge tag 'nand/for-5.9' of ↵Richard Weinberger1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next Core changes: * Drop useless 'depends on' in Kconfig * Add an extra level in the Kconfig hierarchy * Trivial spellings * Dynamic allocation of the interface configurations * Dropping the default ONFI timing mode * Various cleanup (types, structures, naming, comments) * Hide the chip->data_interface indirection * Add the generic rb-gpios property * Add the ->choose_interface_config() hook * Introduce nand_choose_best_sdr_timings() * Use default values for tPROG_max and tBERS_max * Avoid redefining tR_max and tCCS_min * Add a helper to find the closest ONFI mode * bcm63xx MTD parsers: simplify CFE detection Raw NAND controller drivers changes: * fsl-upm: Deprecation of specific DT properties * fsl_upm: Driver rework and cleanup in favor of ->exec_op() * Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use * brcmnand: ECC error handling on EDU transfers * brcmnand: Don't default to EDU transfers * qcom: Set BAM mode only if not set already * qcom: Avoid write to unavailable register * gpio: Driver rework in favor of ->exec_op() * tango: ->exec_op() conversion * mtk: ->exec_op() conversion Raw NAND chip drivers changes: * toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4 * toshiba: Implement ->choose_interface_config() for TC58NVG0S3E * toshiba: Implement ->choose_interface_config() for TC58TEG5DCLTA00 * hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC
2020-07-07mtd: rawnand: stm32_fmc2: get resources from parent nodeChristophe Kerello1-2/+1
FMC2 EBI support has been added. Common resources (registers base address and clock) can now be shared between the 2 drivers using "st,stm32mp1-fmc2-nfc" compatible string. It means that the common resources should now be found in the parent device when EBI node is available. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1591975362-22009-7-git-send-email-christophe.kerello@st.com
2020-07-07mtd: rawnand: stm32_fmc2: use regmap APIsChristophe Kerello1-0/+2
This patch uses regmap APIs to access all FMC2 registers. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1591975362-22009-6-git-send-email-christophe.kerello@st.com
2020-06-26mtd: nand: Drop useless 'depends on' in KconfigMiquel Raynal1-1/+0
Both OneNAND and raw NAND bits can't be compiled if MTD is disabled because of the if/endif logic in drivers/mtd/Kconfig. There is no need for an extra "depends on MTD" in their respective Kconfig files. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200529002517.3546-12-miquel.raynal@bootlin.com
2020-05-26mtd: rawnand: arasan: Support the hardware BCH ECC engineMiquel Raynal1-0/+1
Add support for the hardware ECC BCH engine. Please mind that this engine has an important limitation: BCH implementation does not inform the user when an uncorrectable ECC error occurs. To workaround this, we avoid using the hardware engine in the read path and do the computation with the software BCH implementation, which is faster than mixing hardware (for correction) and software (for verification). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200519074549.23673-9-miquel.raynal@bootlin.com
2020-05-24mtd: rawnand: arasan: Add new Arasan NAND controllerMiquel Raynal1-0/+7
Add the Arasan NAND controller driver. This brings only NAND controller support. The ECC engine being a bit subtle, hardware ECC support will be added in a second time. This work is based on contributions from Naga Sureshkumar Relli. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Link: https://lore.kernel.org/linux-mtd/20200519074549.23673-8-miquel.raynal@bootlin.com
2020-05-24mtd: rawnand: Remove the cmx270 NAND controller driverBoris Brezillon1-4/+0
The CM-X270 board has been removed, we can remove the custom NAND driver as well. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200518163300.304732-1-boris.brezillon@collabora.com
2020-01-27mtd: rawnand: add unspecified HAS_IOMEM dependencyBrendan Higgins1-1/+1
Currently CONFIG_MTD_NAND_CADENCE implicitly depends on CONFIG_HAS_IOMEM=y; consequently, on architectures without IOMEM we get the following build error: ld: drivers/mtd/nand/raw/cadence-nand-controller.o: in function `cadence_nand_dt_probe.cold.31': drivers/mtd/nand/raw/cadence-nand-controller.c:2969: undefined reference to `devm_platform_ioremap_resource' ld: drivers/mtd/nand/raw/cadence-nand-controller.c:2977: undefined reference to `devm_ioremap_resource' Fix the build error by adding the unspecified dependency. Reported-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-10-04mtd: rawnand: Add new Cadence NAND driver to MTD subsystemPiotr Sroka1-0/+7
Add new Cadence NAND driver to MTD subsystem Signed-off-by: Piotr Sroka <piotrs@cadence.com> Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-08-26mtd: rawnand: remove w90x900 driverArnd Bergmann1-8/+0
The ARM w90x900 platform is getting removed, so this driver is obsolete. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-08-26mtd: rawnand: Add Macronix raw NAND controller driverMason Yang1-0/+6
Add a driver for Macronix raw NAND controller. Signed-off-by: Mason Yang <masonccyang@mxic.com.tw> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-18mtd: rawnand: fix build dependencyAnders Roxell1-1/+1
When enabling CONFIG_MTD_NAND_ECC_SW_BCH as a module, the MTD_NAND_ECC_SW_BCH depends on MTD_NAND, but the module controlled by MTD_NAND links against the module controlled by MTD_NAND_ECC_SW_BCH. This leads to the following link failure. aarch64-linux-gnu-ld: drivers/mtd/nand/raw/nand_base.o: in function `nand_cleanup': ../drivers/mtd/nand/raw/nand_base.c:5886: undefined reference to `nand_bch_free' aarch64-linux-gnu-ld: ../drivers/mtd/nand/raw/nand_base.c:5886:(.text+0x9928): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `nand_bch_free' aarch64-linux-gnu-ld: drivers/mtd/nand/raw/nand_base.o: in function `nand_set_ecc_soft_ops': ../drivers/mtd/nand/raw/nand_base.c:5093: undefined reference to `nand_bch_calculate_ecc' aarch64-linux-gnu-ld: ../drivers/mtd/nand/raw/nand_base.c:5093:(.text+0xe914): relocation truncated to fit: R_AARCH64_ADR_PREL_PG_HI21 against undefined symbol `nand_bch_calculate_ecc' aarch64-linux-gnu-ld: ../drivers/mtd/nand/raw/nand_base.c:5093: undefined reference to `nand_bch_calculate_ecc' aarch64-linux-gnu-ld: ../drivers/mtd/nand/raw/nand_base.c:5094: undefined reference to `nand_bch_correct_data' aarch64-linux-gnu-ld: ../drivers/mtd/nand/raw/nand_base.c:5094:(.text+0xe934): relocation truncated to fit: R_AARCH64_ADR_PREL_PG_HI21 against undefined symbol `nand_bch_correct_data' aarch64-linux-gnu-ld: ../drivers/mtd/nand/raw/nand_base.c:5094: undefined reference to `nand_bch_correct_data' aarch64-linux-gnu-ld: ../drivers/mtd/nand/raw/nand_base.c:5148: undefined reference to `nand_bch_init' aarch64-linux-gnu-ld: ../drivers/mtd/nand/raw/nand_base.c:5148:(.text+0xebbc): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `nand_bch_init' Rework CONFIG_MTD_NAND_ECC_SW_BCH from tristate to bool, and then link the nand_bch.o file into nand.ko if its enabled. Fixes: 51ef1d0b2095 ("mtd: nand: Clarify Kconfig entry for software BCH ECC algorithm") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-04-18mtd: rawnand: Clarify Kconfig entry MTD_NANDMiquel Raynal1-3/+3
MTD_NAND is large and encloses much more than what the symbol is actually used for: raw NAND. Clarify the symbol by naming it MTD_RAW_NAND instead. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-12 02:28:15 +0300