summaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)AuthorFilesLines
2022-12-14mmc: mtk-sd: Fix missing clk_disable_unprepare in msdc_of_clock_parse()Gaosheng Cui1-4/+2
[ Upstream commit c61bfb1cb63ddab52b31cf5f1924688917e61fad ] The clk_disable_unprepare() should be called in the error handling of devm_clk_bulk_get_optional, fix it by replacing devm_clk_get_optional and clk_prepare_enable by devm_clk_get_optional_enabled. Fixes: f5eccd94b63f ("mmc: mediatek: Add subsys clock control for MT8192 msdc") Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221125090141.3626747-1-cuigaosheng1@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-08mmc: sdhci: Fix voltage switch delayAdrian Hunter2-7/+56
commit c981cdfb9925f64a364f13c2b4f98f877308a408 upstream. Commit 20b92a30b561 ("mmc: sdhci: update signal voltage switch code") removed voltage switch delays from sdhci because mmc core had been enhanced to support them. However that assumed that sdhci_set_ios() did a single clock change, which it did not, and so the delays in mmc core, which should have come after the first clock change, were not effective. Fix by avoiding re-configuring UHS and preset settings when the clock is turning on and the settings have not changed. That then also avoids the associated clock changes, so that then sdhci_set_ios() does a single clock change when voltage switching, and the mmc core delays become effective. To do that has meant keeping track of driver strength (host->drv_type), and cases of reinitialization (host->reinit_uhs). Note also, the 'turning_on_clk' restriction should not be necessary but is done to minimize the impact of the change on stable kernels. Fixes: 20b92a30b561 ("mmc: sdhci: update signal voltage switch code") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20221128133259.38305-2-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-08mmc: sdhci-sprd: Fix no reset data and command after voltage switchWenchao Chen1-1/+3
commit dd30dcfa7a74a06f8dcdab260d8d5adf32f17333 upstream. After switching the voltage, no reset data and command will cause CMD2 timeout. Fixes: 29ca763fc26f ("mmc: sdhci-sprd: Add pin control support for voltage switch") Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221130121328.25553-1-wenchao.chen@unisoc.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-08mmc: sdhci-esdhc-imx: correct CQHCI exit halt state checkSebastian Falbesoner1-1/+1
commit a3cab1d2132474969871b5d7f915c5c0167b48b0 upstream. With the current logic the "failed to exit halt state" error would be shown even if any other bit than CQHCI_HALT was set in the CQHCI_CTL register, since the right hand side is always true. Fix this by using the correct operator (bit-wise instead of logical AND) to only check for the halt bit flag, which was obviously intended here. Fixes: 85236d2be844 ("mmc: sdhci-esdhc-imx: clear the HALT bit when enable CQE") Signed-off-by: Sebastian Falbesoner <sebastian.falbesoner@gmail.com> Acked-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221121105721.1903878-1-sebastian.falbesoner@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-08mmc: core: Fix ambiguous TRIM and DISCARD argChristian Löhle1-2/+7
commit 489d144563f23911262a652234b80c70c89c978b upstream. Clean up the MMC_TRIM_ARGS define that became ambiguous with DISCARD introduction. While at it, let's fix one usage where MMC_TRIM_ARGS falsely included DISCARD too. Fixes: b3bf915308ca ("mmc: core: new discard feature support at eMMC v4.5") Signed-off-by: Christian Loehle <cloehle@hyperstone.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/11376b5714964345908f3990f17e0701@hyperstone.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-08mmc: mmc_test: Fix removal of debugfs fileYe Bin1-1/+2
commit f4307b4df1c28842bb1950ff0e1b97e17031b17f upstream. In __mmc_test_register_dbgfs_file(), we need to assign 'file', as it's being used when removing the debugfs files when the mmc_test module is removed. Fixes: a04c50aaa916 ("mmc: core: no need to check return value of debugfs_create functions") Signed-off-by: Ye Bin <yebin10@huawei.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org [Ulf: Re-wrote the commit msg] Link: https://lore.kernel.org/r/20221123095506.1965691-1-yebin@huaweicloud.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-02mmc: sdhci-brcmstb: Fix SDHCI_RESET_ALL for CQHCIBrian Norris1-1/+2
[ Upstream commit 56baa208f91061ff27ec2d93fbc483f624d373b4 ] [[ NOTE: this is completely untested by the author, but included solely because, as noted in commit df57d73276b8 ("mmc: sdhci-pci: Fix SDHCI_RESET_ALL for CQHCI for Intel GLK-based controllers"), "other drivers using CQHCI might benefit from a similar change, if they also have CQHCI reset by SDHCI_RESET_ALL." We've now seen the same bug on at least MSM, Arasan, and Intel hardware. ]] SDHCI_RESET_ALL resets will reset the hardware CQE state, but we aren't tracking that properly in software. When out of sync, we may trigger various timeouts. It's not typical to perform resets while CQE is enabled, but this may occur in some suspend or error recovery scenarios. Include this fix by way of the new sdhci_and_cqhci_reset() helper. I only patch the bcm7216 variant even though others potentially *could* provide the 'supports-cqe' property (and thus enable CQHCI), because d46ba2d17f90 ("mmc: sdhci-brcmstb: Add support for Command Queuing (CQE)") and some Broadcom folks confirm that only the 7216 variant actually supports it. This patch depends on (and should not compile without) the patch entitled "mmc: cqhci: Provide helper for resetting both SDHCI and CQHCI". Fixes: d46ba2d17f90 ("mmc: sdhci-brcmstb: Add support for Command Queuing (CQE)") Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221026124150.v4.3.I6a715feab6d01f760455865e968ecf0d85036018@changeid Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-02mmc: sdhci-brcmstb: Enable Clock Gating to save powerAl Cooper1-1/+34
[ Upstream commit 6bcc55fe648b860ef0c2b8dc23adc05bcddb93c2 ] Enabling this feature will allow the controller to stop the bus clock when the bus is idle. The feature is not part of the standard and is unique to newer Arasan cores and is enabled with a bit in a vendor specific register. This feature will only be enabled for non-removable devices because they don't switch the voltage and clock gating breaks SD Card volatge switching. Signed-off-by: Al Cooper <alcooperx@gmail.com> Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20220427180853.35970-3-kdasu.kdev@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Stable-dep-of: 56baa208f910 ("mmc: sdhci-brcmstb: Fix SDHCI_RESET_ALL for CQHCI") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-02mmc: sdhci-brcmstb: Re-organize flagsAl Cooper1-16/+16
[ Upstream commit f3a70f991dd07330225ea11e158e1d07ad5733fb ] Re-organize the flags by basing the bit names on the flag that they apply to. Also change the "flags" member in the "brcmstb_match_priv" struct to const. Signed-off-by: Al Cooper <alcooperx@gmail.com> Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20220427180853.35970-2-kdasu.kdev@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Stable-dep-of: 56baa208f910 ("mmc: sdhci-brcmstb: Fix SDHCI_RESET_ALL for CQHCI") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-11-26mmc: sdhci-pci: Fix possible memory leak caused by missing pci_dev_put()Xiongfeng Wang1-0/+2
commit 222cfa0118aa68687ace74aab8fdf77ce8fbd7e6 upstream. pci_get_device() will increase the reference count for the returned pci_dev. We need to use pci_dev_put() to decrease the reference count before amd_probe() returns. There is no problem for the 'smbus_dev == NULL' branch because pci_dev_put() can also handle the NULL input parameter case. Fixes: 659c9bc114a8 ("mmc: sdhci-pci: Build o2micro support in the same module") Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221114083100.149200-1-wangxiongfeng2@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-26mmc: sdhci-pci-o2micro: fix card detect fail issue caused by CD# debounce ↵Chevron Li1-0/+7
timeout commit 096cc0cddf58232bded309336961784f1d1c85f8 upstream. The SD card is recognized failed sometimes when resume from suspend. Because CD# debounce time too long then card present report wrong. Finally, card is recognized failed. Signed-off-by: Chevron Li <chevron.li@bayhubtech.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221104095512.4068-1-chevron.li@bayhubtech.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-26mmc: core: properly select voltage range without power cycleYann Gautier1-1/+7
commit 39a72dbfe188291b156dd6523511e3d5761ce775 upstream. In mmc_select_voltage(), if there is no full power cycle, the voltage range selected at the end of the function will be on a single range (e.g. 3.3V/3.4V). To keep a range around the selected voltage (3.2V/3.4V), the mask shift should be reduced by 1. This issue was triggered by using a specific SD-card (Verbatim Premium 16GB UHS-1) on an STM32MP157C-DK2 board. This board cannot do UHS modes and there is no power cycle. And the card was failing to switch to high-speed mode. When adding the range 3.2V/3.3V for this card with the proposed shift change, the card can switch to high-speed mode. Fixes: ce69d37b7d8f ("mmc: core: Prevent violation of specs while initializing cards") Signed-off-by: Yann Gautier <yann.gautier@foss.st.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221028073740.7259-1-yann.gautier@foss.st.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-16mms: sdhci-esdhc-imx: Fix SDHCI_RESET_ALL for CQHCIBrian Norris1-1/+2
commit fb1dec44c6750bb414f47b929c8c175a1a127c31 upstream. [[ NOTE: this is completely untested by the author, but included solely because, as noted in commit df57d73276b8 ("mmc: sdhci-pci: Fix SDHCI_RESET_ALL for CQHCI for Intel GLK-based controllers"), "other drivers using CQHCI might benefit from a similar change, if they also have CQHCI reset by SDHCI_RESET_ALL." We've now seen the same bug on at least MSM, Arasan, and Intel hardware. ]] SDHCI_RESET_ALL resets will reset the hardware CQE state, but we aren't tracking that properly in software. When out of sync, we may trigger various timeouts. It's not typical to perform resets while CQE is enabled, but this may occur in some suspend or error recovery scenarios. Include this fix by way of the new sdhci_and_cqhci_reset() helper. This patch depends on (and should not compile without) the patch entitled "mmc: cqhci: Provide helper for resetting both SDHCI and CQHCI". Fixes: bb6e358169bf ("mmc: sdhci-esdhc-imx: add CMDQ support") Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221026124150.v4.4.I7d01f9ad11bacdc9213dee61b7918982aea39115@changeid Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-16mmc: sdhci-esdhc-imx: use the correct host caps for MMC_CAP_8_BIT_DATAHaibo Chen1-2/+2
commit f002f45a00ee14214d96b18b9a555fe2c56afb20 upstream. MMC_CAP_8_BIT_DATA belongs to struct mmc_host, not struct sdhci_host. So correct it here. Fixes: 1ed5c3b22fc7 ("mmc: sdhci-esdhc-imx: Propagate ESDHC_FLAG_HS400* only on 8bit bus") Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Cc: stable@vger.kernel.org Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1667893503-20583-1-git-send-email-haibo.chen@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-16mmc: sdhci-tegra: Fix SDHCI_RESET_ALL for CQHCIBrian Norris1-1/+2
commit 836078449464e6af3b66ae6652dae79af176f21e upstream. [[ NOTE: this is completely untested by the author, but included solely because, as noted in commit df57d73276b8 ("mmc: sdhci-pci: Fix SDHCI_RESET_ALL for CQHCI for Intel GLK-based controllers"), "other drivers using CQHCI might benefit from a similar change, if they also have CQHCI reset by SDHCI_RESET_ALL." We've now seen the same bug on at least MSM, Arasan, and Intel hardware. ]] SDHCI_RESET_ALL resets will reset the hardware CQE state, but we aren't tracking that properly in software. When out of sync, we may trigger various timeouts. It's not typical to perform resets while CQE is enabled, but this may occur in some suspend or error recovery scenarios. Include this fix by way of the new sdhci_and_cqhci_reset() helper. This patch depends on (and should not compile without) the patch entitled "mmc: cqhci: Provide helper for resetting both SDHCI and CQHCI". Fixes: 3c4019f97978 ("mmc: tegra: HW Command Queue Support for Tegra SDMMC") Signed-off-by: Brian Norris <briannorris@chromium.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221026124150.v4.5.I418c9eaaf754880fcd2698113e8c3ef821a944d7@changeid Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-16mmc: sdhci_am654: Fix SDHCI_RESET_ALL for CQHCIBrian Norris1-3/+4
commit 162503fd1c3a1d4e14dbe7f399c1d1bec1c8abbc upstream. [[ NOTE: this is completely untested by the author, but included solely because, as noted in commit df57d73276b8 ("mmc: sdhci-pci: Fix SDHCI_RESET_ALL for CQHCI for Intel GLK-based controllers"), "other drivers using CQHCI might benefit from a similar change, if they also have CQHCI reset by SDHCI_RESET_ALL." We've now seen the same bug on at least MSM, Arasan, and Intel hardware. ]] SDHCI_RESET_ALL resets will reset the hardware CQE state, but we aren't tracking that properly in software. When out of sync, we may trigger various timeouts. It's not typical to perform resets while CQE is enabled, but this may occur in some suspend or error recovery scenarios. Include this fix by way of the new sdhci_and_cqhci_reset() helper. This patch depends on (and should not compile without) the patch entitled "mmc: cqhci: Provide helper for resetting both SDHCI and CQHCI". Fixes: f545702b74f9 ("mmc: sdhci_am654: Add Support for Command Queuing Engine to J721E") Signed-off-by: Brian Norris <briannorris@chromium.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221026124150.v4.6.I35ca9d6220ba48304438b992a76647ca8e5b126f@changeid Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-16mmc: sdhci-of-arasan: Fix SDHCI_RESET_ALL for CQHCIBrian Norris1-1/+2
commit 5d249ac37fc2396e8acc1adb0650cdacae5a990d upstream. SDHCI_RESET_ALL resets will reset the hardware CQE state, but we aren't tracking that properly in software. When out of sync, we may trigger various timeouts. It's not typical to perform resets while CQE is enabled, but one particular case I hit commonly enough: mmc_suspend() -> mmc_power_off(). Typically we will eventually deactivate CQE (cqhci_suspend() -> cqhci_deactivate()), but that's not guaranteed -- in particular, if we perform a partial (e.g., interrupted) system suspend. The same bug was already found and fixed for two other drivers, in v5.7 and v5.9: 5cf583f1fb9c ("mmc: sdhci-msm: Deactivate CQE during SDHC reset") df57d73276b8 ("mmc: sdhci-pci: Fix SDHCI_RESET_ALL for CQHCI for Intel GLK-based controllers") The latter is especially prescient, saying "other drivers using CQHCI might benefit from a similar change, if they also have CQHCI reset by SDHCI_RESET_ALL." So like these other patches, deactivate CQHCI when resetting the controller. Do this via the new sdhci_and_cqhci_reset() helper. This patch depends on (and should not compile without) the patch entitled "mmc: cqhci: Provide helper for resetting both SDHCI and CQHCI". Fixes: 84362d79f436 ("mmc: sdhci-of-arasan: Add CQHCI support for arasan,sdhci-5.1") Cc: <stable@vger.kernel.org> Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20221026124150.v4.2.I29f6a2189e84e35ad89c1833793dca9e36c64297@changeid Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-16mmc: cqhci: Provide helper for resetting both SDHCI and CQHCIBrian Norris1-0/+24
commit ebb5fd38f41132e6924cb33b647337f4a5d5360c upstream. Several SDHCI drivers need to deactivate command queueing in their reset hook (see sdhci_cqhci_reset() / sdhci-pci-core.c, for example), and several more are coming. Those reset implementations have some small subtleties (e.g., ordering of initialization of SDHCI vs. CQHCI might leave us resetting with a NULL ->cqe_private), and are often identical across different host drivers. We also don't want to force a dependency between SDHCI and CQHCI, or vice versa; non-SDHCI drivers use CQHCI, and SDHCI drivers might support command queueing through some other means. So, implement a small helper, to avoid repeating the same mistakes in different drivers. Simply stick it in a header, because it's so small it doesn't deserve its own module right now, and inlining to each driver is pretty reasonable. This is marked for -stable, as it is an important prerequisite patch for several SDHCI controller bugfixes that follow. Cc: <stable@vger.kernel.org> Signed-off-by: Brian Norris <briannorris@chromium.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20221026124150.v4.1.Ie85faa09432bfe1b0890d8c24ff95e17f3097317@changeid Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-03mmc: block: Remove error check of hw_reset on resetChristian Löhle1-18/+26
commit 406e14808ee695cbae1eafa5fd3ac563c29470ab upstream. Before switching back to the right partition in mmc_blk_reset there used to be a check if hw_reset was even supported. This return value was removed, so there is no reason to check. Furthermore ensure part_curr is not falsely set to a valid value on reset or partition switch error. As part of this change the code paths of mmc_blk_reset calls were checked to ensure no commands are issued after a failed mmc_blk_reset directly without going through the block layer. Fixes: fefdd3c91e0a ("mmc: core: Drop superfluous validations in mmc_hw|sw_reset()") Cc: stable@vger.kernel.org Signed-off-by: Christian Loehle <cloehle@hyperstone.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/e91be6199d04414a91e20611c81bfe1d@hyperstone.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-03mmc: sdhci-esdhc-imx: Propagate ESDHC_FLAG_HS400* only on 8bit busSascha Hauer1-6/+8
commit 1ed5c3b22fc78735c539e4767832aea58db6761c upstream. The core issues the warning "drop HS400 support since no 8-bit bus" when one of the ESDHC_FLAG_HS400* flags is set on a non 8bit capable host. To avoid this warning set these flags only on hosts that actually can do 8bit, i.e. have bus-width = <8> set in the device tree. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Haibo Chen <haibo.chen@nxp.com> Fixes: 029e2476f9e6 ("mmc: sdhci-esdhc-imx: add HS400_ES support for i.MX8QXP") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221013093248.2220802-1-s.hauer@pengutronix.de Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-03mmc: sdhci-pci-core: Disable ES for ASUS BIOS on Jasper LakePatrick Thompson1-3/+11
commit 9dc0033e4658d6f9d9952c3c0c6be3ec25bc2985 upstream. Enhanced Strobe (ES) does not work correctly on the ASUS 1100 series of devices. Jasper Lake eMMCs (pci_id 8086:4dc4) are supposed to support ES. There are also two system families under the series, thus this is being scoped to the ASUS BIOS. The failing ES prevents the installer from writing to disk. Falling back to HS400 without ES fixes the issue. Signed-off-by: Patrick Thompson <ptf@google.com> Fixes: 315e3bd7ac19 ("mmc: sdhci-pci: Add support for Intel JSL") Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221013210017.3751025-1-ptf@google.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-03mmc: core: Fix kernel panic when remove non-standard SDIO cardMatthew Ma1-1/+2
commit 9972e6b404884adae9eec7463e30d9b3c9a70b18 upstream. SDIO tuple is only allocated for standard SDIO card, especially it causes memory corruption issues when the non-standard SDIO card has removed, which is because the card device's reference counter does not increase for it at sdio_init_func(), but all SDIO card device reference counter gets decreased at sdio_release_func(). Fixes: 6f51be3d37df ("sdio: allow non-standard SDIO cards") Signed-off-by: Matthew Ma <mahongwei@zeku.com> Reviewed-by: Weizhao Ouyang <ouyangweizhao@zeku.com> Reviewed-by: John Wang <wangdayu@zeku.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221014034951.2300386-1-ouyangweizhao@zeku.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-11-03mmc: sdhci_am654: 'select', not 'depends' REGMAP_MMIOBrian Norris1-1/+2
commit 8d280b1df87e0b3d1355aeac7e62b62214b93f1c upstream. REGMAP_MMIO is not user-configurable, so we can only satisfy this dependency by enabling some other Kconfig symbol that properly 'select's it. Use select like everybody else. Noticed when trying to enable this driver for compile testing. Fixes: 59592cc1f593 ("mmc: sdhci_am654: Add dependency on MMC_SDHCI_AM654") Signed-off-by: Brian Norris <briannorris@chromium.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221024180300.2292208-1-briannorris@chromium.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-29mmc: core: Add SD card quirk for broken discardAvri Altman3-1/+18
commit 07d2872bf4c864eb83d034263c155746a2fb7a3b upstream. Some SD-cards from Sandisk that are SDA-6.0 compliant reports they supports discard, while they actually don't. This might cause mk2fs to fail while trying to format the card and revert it to a read-only mode. To fix this problem, let's add a card quirk (MMC_QUIRK_BROKEN_SD_DISCARD) to indicate that we shall fall-back to use the legacy erase command instead. Signed-off-by: Avri Altman <avri.altman@wdc.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220928095744.16455-1-avri.altman@wdc.com [Ulf: Updated the commit message] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-29mmc: sdhci-tegra: Use actual clock rate for SW tuning correctionPrathamesh Shete1-1/+1
[ Upstream commit b78870e7f41534cc719c295d1f8809aca93aeeab ] Ensure tegra_host member "curr_clk_rate" holds the actual clock rate instead of requested clock rate for proper use during tuning correction algorithm. Actual clk rate may not be the same as the requested clk frequency depending on the parent clock source set. Tuning correction algorithm depends on certain parameters which are sensitive to current clk rate. If the host clk is selected instead of the actual clock rate, tuning correction algorithm may end up applying invalid correction, which could result in errors Fixes: ea8fc5953e8b ("mmc: tegra: update hw tuning process") Signed-off-by: Aniruddha TVS Rao <anrao@nvidia.com> Signed-off-by: Prathamesh Shete <pshete@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Thierry Reding <treding@nvidia.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221006130622.22900-4-pshete@nvidia.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26mmc: sdhci-msm: add compatible string check for sdm670Richard Acayan1-0/+1
[ Upstream commit 4de95950d970c71a9e82a24573bb7a44fd95baa1 ] The Snapdragon 670 has the same quirk as Snapdragon 845 (needing to restore the dll config). Add a compatible string check to detect the need for this. Signed-off-by: Richard Acayan <mailingradian@gmail.com> Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220923014322.33620-3-mailingradian@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26mmc: wmt-sdmmc: Fix an error handling path in wmt_mci_probe()Christophe JAILLET1-1/+4
[ Upstream commit cb58188ad90a61784a56a64f5107faaf2ad323e7 ] A dma_free_coherent() call is missing in the error handling path of the probe, as already done in the remove function. Fixes: 3a96dff0f828 ("mmc: SD/MMC Host Controller for Wondermedia WM8505/WM8650") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/53fc6ffa5d1c428fefeae7d313cf4a669c3a1e98.1663873255.git.christophe.jaillet@wanadoo.fr Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26mmc: au1xmmc: Fix an error handling path in au1xmmc_probe()Christophe JAILLET1-1/+2
[ Upstream commit 5cbedf52608cc3cbc1c2a9a861fb671620427a20 ] If clk_prepare_enable() fails, there is no point in calling clk_disable_unprepare() in the error handling path. Move the out_clk label at the right place. Fixes: b6507596dfd6 ("MIPS: Alchemy: au1xmmc: use clk framework") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/21d99886d07fa7fcbec74992657dabad98c935c4.1661412818.git.christophe.jaillet@wanadoo.fr Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-26mmc: sdhci-sprd: Fix minimum clock limitWenchao Chen1-1/+1
commit 6e141772e6465f937458b35ddcfd0a981b6f5280 upstream. The Spreadtrum controller supports 100KHz minimal clock rate, which means that the current value 400KHz is wrong. Unfortunately this has also lead to fail to initialize some cards, which are allowed to require 100KHz to work. So, let's fix the problem by changing the minimal supported clock rate to 100KHz. Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221011104935.10980-1-wenchao.chen666@gmail.com [Ulf: Clarified to commit-message] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-12mmc: core: Terminate infinite loop in SD-UHS voltage switchBrian Norris1-1/+2
[ Upstream commit e9233917a7e53980664efbc565888163c0a33c3f ] This loop intends to retry a max of 10 times, with some implicit termination based on the SD_{R,}OCR_S18A bit. Unfortunately, the termination condition depends on the value reported by the SD card (*rocr), which may or may not correctly reflect what we asked it to do. Needless to say, it's not wise to rely on the card doing what we expect; we should at least terminate the loop regardless. So, check both the input and output values, so we ensure we will terminate regardless of the SD card behavior. Note that SDIO learned a similar retry loop in commit 0797e5f1453b ("mmc: core: Fixup signal voltage switch"), but that used the 'ocr' result, and so the current pre-terminating condition looks like: rocr & ocr & R4_18V_PRESENT (i.e., it doesn't have the same bug.) This addresses a number of crash reports seen on ChromeOS that look like the following: ... // lots of repeated: ... <4>[13142.846061] mmc1: Skipping voltage switch <4>[13143.406087] mmc1: Skipping voltage switch <4>[13143.964724] mmc1: Skipping voltage switch <4>[13144.526089] mmc1: Skipping voltage switch <4>[13145.086088] mmc1: Skipping voltage switch <4>[13145.645941] mmc1: Skipping voltage switch <3>[13146.153969] INFO: task halt:30352 blocked for more than 122 seconds. ... Fixes: f2119df6b764 ("mmc: sd: add support for signal voltage switch procedure") Cc: <stable@vger.kernel.org> Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20220914014010.2076169-1-briannorris@chromium.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-12mmc: core: Replace with already defined values for readabilityChanWoo Lee1-1/+1
[ Upstream commit e427266460826bea21b70f9b2bb29decfb2c2620 ] SD_ROCR_S18A is already defined and is used to check the rocr value, so let's replace with already defined values for readability. Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220706004840.24812-1-cw9316.lee@samsung.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Stable-dep-of: e9233917a7e5 ("mmc: core: Terminate infinite loop in SD-UHS voltage switch") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-10-05mmc: hsq: Fix data stomping during mmc recoveryWenchao Chen1-1/+1
commit e7afa79a3b35a27a046a2139f8b20bd6b98155c2 upstream. The block device uses multiple queues to access emmc. There will be up to 3 requests in the hsq of the host. The current code will check whether there is a request doing recovery before entering the queue, but it will not check whether there is a request when the lock is issued. The request is in recovery mode. If there is a request in recovery, then a read and write request is initiated at this time, and the conflict between the request and the recovery request will cause the data to be trampled. Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com> Fixes: 511ce378e16f ("mmc: Add MMC host software queue support") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220916090506.10662-1-wenchao.chen666@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-10-05mmc: moxart: fix 4-bit bus width and remove 8-bit bus widthSergei Antonov1-14/+3
commit 35ca91d1338ae158f6dcc0de5d1e86197924ffda upstream. According to the datasheet [1] at page 377, 4-bit bus width is turned on by bit 2 of the Bus Width Register. Thus the current bitmask is wrong: define BUS_WIDTH_4 BIT(1) BIT(1) does not work but BIT(2) works. This has been verified on real MOXA hardware with FTSDC010 controller revision 1_6_0. The corrected value of BUS_WIDTH_4 mask collides with: define BUS_WIDTH_8 BIT(2). Additionally, 8-bit bus width mode isn't supported according to the datasheet, so let's remove the corresponding code. [1] https://bitbucket.org/Kasreyn/mkrom-uc7112lx/src/master/documents/FIC8120_DS_v1.2.pdf Fixes: 1b66e94e6b99 ("mmc: moxart: Add MOXA ART SD/MMC driver") Signed-off-by: Sergei Antonov <saproj@gmail.com> Cc: Jonas Jensen <jonas.jensen@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220907205753.1577434-1-saproj@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-08mmc: core: Fix inconsistent sd3_bus_mode at UHS-I SD voltage switch failureAdrian Hunter1-26/+16
commit 63f1560930e4e1c4f6279b8ae715c9841fe1a6d3 upstream. If re-initialization results is a different signal voltage, because the voltage switch failed previously, but not this time (or vice versa), then sd3_bus_mode will be inconsistent with the card because the SD_SWITCH command is done only upon first initialization. Fix by always reading SD_SWITCH information during re-initialization, which also means it does not need to be re-read later for the 1.8V fixup workaround. Note, brief testing showed SD_SWITCH took about 1.8ms to 2ms which added about 1% to 1.5% to the re-initialization time, so it's not particularly significant. Reported-by: Seunghui Lee <sh043.lee@samsung.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Seunghui Lee <sh043.lee@samsung.com> Tested-by: Seunghui Lee <sh043.lee@samsung.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220815073321.63382-3-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-08mmc: core: Fix UHS-I SD 1.8V workaround branchAdrian Hunter1-3/+3
commit 15c56208c79c340686869c31595c209d1431c5e8 upstream. When introduced, upon success, the 1.8V fixup workaround in mmc_sd_init_card() would branch to practically the end of the function, to a label named "done". Unfortunately, perhaps due to the label name, over time new code has been added that really should have come after "done" not before it. Let's fix the problem by moving the label to the correct place and rename it "cont". Fixes: 045d705dc1fb ("mmc: core: Enable the MMC host software queue for the SD card") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Seunghui Lee <sh043.lee@samsung.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220815073321.63382-2-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-05mmc: sdhci-of-dwcmshc: Re-enable support for the BlueField-3 SoCLiming Sun1-2/+14
[ Upstream commit a0753ef66c34c1739580219dca664eda648164b7 ] The commit 08f3dff799d4 (mmc: sdhci-of-dwcmshc: add rockchip platform support") introduces the use of_device_get_match_data() to check for some chips. Unfortunately, it also breaks the BlueField-3 FW, which uses ACPI. To fix the problem, let's add the ACPI match data and the corresponding quirks to re-enable the support for the BlueField-3 SoC. Reviewed-by: David Woods <davwoods@nvidia.com> Signed-off-by: Liming Sun <limings@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: 08f3dff799d4 ("mmc: sdhci-of-dwcmshc: add rockchip platform support") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220809173742.178440-1-limings@nvidia.com [Ulf: Clarified the commit message a bit] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-05mmc: sdhci-of-dwcmshc: rename rk3568 to rk35xxSebastian Reichel1-23/+23
[ Upstream commit 86e1a8e1f9b555af342c53ae06284eeeab9a4263 ] Prepare driver for rk3588 support by renaming the internal data structures. Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20220504213251.264819-11-sebastian.reichel@collabora.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-05mmc: sdhci-of-dwcmshc: add reset call back for rockchip SocsYifeng Zhao1-1/+25
[ Upstream commit 70f832206fe72e9998b46363e8e59e89b0b757bc ] The reset function build in the SDHCI will not reset the logic circuit related to the tuning function, which may cause data reading errors. Resetting the complete SDHCI controller through the reset controller fixes the issue. Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com> [rebase, use optional variant of reset getter] Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Link: https://lore.kernel.org/r/20220504213251.264819-10-sebastian.reichel@collabora.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-05mmc: mtk-sd: Clear interrupts when cqe off/disableWenbin Mei1-0/+6
[ Upstream commit cc5d1692600613e72f32af60e27330fe0c79f4fe ] Currently we don't clear MSDC interrupts when cqe off/disable, which led to the data complete interrupt will be reserved for the next command. If the next command with data transfer after cqe off/disable, we process the CMD ready interrupt and trigger DMA start for data, but the data complete interrupt is already exists, then SW assume that the data transfer is complete, SW will trigger DMA stop, but the data may not be transmitted yet or is transmitting, so we may encounter the following error: mtk-msdc 11230000.mmc: CMD bus busy detected. Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com> Fixes: 88bd652b3c74 ("mmc: mediatek: command queue support") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220728080048.21336-1-wenbin.mei@mediatek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25mmc: tmio: avoid glitches when resettingWolfram Sang4-23/+42
[ Upstream commit 2e586f8a5b0ed4a525014a692923ac96f6647816 ] If we reset because of an error, we need to preserve values for the clock frequency. Otherwise, glitches may be seen on the bus. To achieve that, we introduce a 'preserve' parameter to the reset function and the IP core specific reset callbacks to handle everything accordingly. Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20220625131722.1397-1-wsa@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25mmc: meson-gx: Fix an error handling path in meson_mmc_probe()Christophe JAILLET1-2/+4
commit b3e1cf31154136da855f3cb6117c17eb0b6bcfb4 upstream. The commit in Fixes has introduced a new error handling which should goto the existing error handling path. Otherwise some resources leak. Fixes: 19c6beaa064c ("mmc: meson-gx: add device reset") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/be4b863bacf323521ba3a02efdc4fca9cdedd1a6.1659855351.git.christophe.jaillet@wanadoo.fr Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25mmc: pxamci: Fix an error handling path in pxamci_probe()Christophe JAILLET1-1/+1
commit 98d7c5e5792b8ce3e1352196dac7f404bb1b46ec upstream. The commit in Fixes: has moved some code around without updating gotos to the error handling path. Update it now and release some resources if pxamci_of_init() fails. Fixes: fa3a5115469c ("mmc: pxamci: call mmc_of_parse()") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/6d75855ad4e2470e9ed99e0df21bc30f0c925a29.1658862932.git.christophe.jaillet@wanadoo.fr Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25mmc: pxamci: Fix another error handling path in pxamci_probe()Christophe JAILLET1-1/+1
commit b886f54c300d31c109d2e4336b22922b64e7ba7d upstream. The commit in Fixes: has introduced an new error handling without branching to the existing error handling path. Update it now and release some resources if pxamci_init_ocr() fails. Fixes: 61951fd6cb49 ("mmc: pxamci: let mmc core handle regulators") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/07a2dcebf8ede69b484103de8f9df043f158cffd.1658862932.git.christophe.jaillet@wanadoo.fr Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-17mmc: cavium-thunderx: Add of_node_put() when breaking out of loopLiang He1-1/+3
[ Upstream commit 7ee480795e41db314f2c445c65ed854a5d6e8e32 ] In thunder_mmc_probe(), we should call of_node_put() when breaking out of for_each_child_of_node() which has increased and decreased the refcount during each iteration. Fixes: 166bac38c3c5 ("mmc: cavium: Add MMC PCI driver for ThunderX SOCs") Signed-off-by: Liang He <windhl@126.com> Acked-by: Robert Richter <rric@kernel.org> Link: https://lore.kernel.org/r/20220719095216.1241601-2-windhl@126.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-17mmc: cavium-octeon: Add of_node_put() when breaking out of loopLiang He1-0/+1
[ Upstream commit 19bbb49acf8d7a03cb83e05624363741a4c3ec6f ] In octeon_mmc_probe(), we should call of_node_put() when breaking out of for_each_child_of_node() which has increased and decreased the refcount during each iteration. Fixes: 01d95843335c ("mmc: cavium: Add MMC support for Octeon SOCs.") Signed-off-by: Liang He <windhl@126.com> Acked-by: Robert Richter <rric@kernel.org> Link: https://lore.kernel.org/r/20220719095216.1241601-1-windhl@126.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-17mmc: block: Add single read for 4k sector cardsChristian Loehle1-14/+14
[ Upstream commit b3fa3e6dccc465969721b8bd2824213bd235efeb ] Cards with 4k native sector size may only be read 4k-aligned, accommodate for this in the single read recovery and use it. Fixes: 81196976ed946 (mmc: block: Add blk-mq support) Signed-off-by: Christian Loehle <cloehle@hyperstone.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/cf4f316274c5474586d0d99b17db4a4c@hyperstone.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-17mmc: sdhci-of-at91: fix set_uhs_signaling rewriting of MC1REugen Hristev1-2/+7
[ Upstream commit 5987e6ded29d52e42fc7b06aa575c60a25eee38e ] In set_uhs_signaling, the DDR bit is being set by fully writing the MC1R register. This can lead to accidental erase of certain bits in this register. Avoid this by doing a read-modify-write operation. Fixes: d0918764c17b ("mmc: sdhci-of-at91: fix MMC_DDR_52 timing selection") Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Tested-by: Karl Olsen <karl@micro-technic.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20220630090926.15061-1-eugen.hristev@microchip.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-17mmc: renesas_sdhi: Get the reset handle early in the probeLad Prabhakar1-4/+4
[ Upstream commit 0dac1e498f8130fdacfdd5289e3a7ac87ec1b9ad ] In case of devm_reset_control_get_optional_exclusive() failure we returned directly instead of jumping to the error path to roll back initialization. This patch moves devm_reset_control_get_optional_exclusive() early in the probe so that we have the reset handle prior to initialization of the hardware. Fixes: b4d86f37eacb7 ("mmc: renesas_sdhi: do hard reset if possible") Reported-by: Pavel Machek <pavel@denx.de> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220624181438.4355-2-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-17mmc: mxcmmc: Silence a clang warningFabio Estevam1-1/+1
[ Upstream commit 7dc65e3c0ef4b746a583b7c58f99873fddf5ccfa ] Change the of_device_get_match_data() cast to (uintptr_t) to silence the following clang warning: drivers/mmc/host/mxcmmc.c:1028:18: warning: cast to smaller integer type 'enum mxcmci_type' from 'const void *' [-Wvoid-pointer-to-enum-cast] Reported-by: kernel test robot <lkp@intel.com> Fixes: 8223e885e74b ("mmc: mxc: Convert the driver to DT-only") Signed-off-by: Fabio Estevam <festevam@gmail.com> Link: https://lore.kernel.org/r/20220526010022.1163483-1-festevam@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-17mmc: sdhci-of-esdhc: Fix refcount leak in esdhc_signal_voltage_switchMiaoqian Lin1-0/+1
[ Upstream commit b5899a3e2f783a27b268e38d37f9b24c71bddf45 ] of_find_matching_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. of_node_put() checks null pointer. Fixes: ea35645a3c66 ("mmc: sdhci-of-esdhc: add support for signal voltage switch") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220523144255.10310-1-linmq006@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>