summaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)AuthorFilesLines
2019-04-27mmc: sdhci: Handle auto-command errorsAdrian Hunter2-1/+41
[ Upstream commit af849c86109d79222e549826068bbf4e7f9a2472 ] If the host controller supports auto-commands then enable the auto-command error interrupt and handle it. In the case of auto-CMD23, the error is treated the same as manual CMD23 error. In the case of auto-CMD12, commands-during-transfer are not permitted, so the error handling is treated the same as a data error. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-27mmc: sdhci: Rename SDHCI_ACMD12_ERR and SDHCI_INT_ACMD12ERRAdrian Hunter3-10/+10
[ Upstream commit 869f8a69bb3a4aec4eb914a330d4ba53a9eed495 ] The SDHCI_ACMD12_ERR register is used for auto-CMD23 and auto-CMD12 errors, as is the SDHCI_INT_ACMD12ERR interrupt bit. Rename them to SDHCI_AUTO_CMD_STATUS and SDHCI_INT_AUTO_CMD_ERR respectively. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-27mmc: sdhci: Fix data command CRC error handlingAdrian Hunter1-25/+15
[ Upstream commit 4bf780996669280171c9cd58196512849b93434e ] Existing data command CRC error handling is non-standard and does not work with some Intel host controllers. Specifically, the assumption that the host controller will continue operating normally after the error interrupt, is not valid. Change the driver to handle the error in the same manner as a data CRC error, taking care to ensure that the data line reset is done for single or multi-block transfers, and it is done before unmapping DMA. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-20mmc: davinci: remove extraneous __init annotationArnd Bergmann1-1/+1
[ Upstream commit 9ce58dd7d9da3ca0d7cb8c9568f1c6f4746da65a ] Building with clang finds a mistaken __init tag: WARNING: vmlinux.o(.text+0x5e4250): Section mismatch in reference from the function davinci_mmcsd_probe() to the function .init.text:init_mmcsd_host() The function davinci_mmcsd_probe() references the function __init init_mmcsd_host(). This is often because davinci_mmcsd_probe lacks a __init annotation or the annotation of init_mmcsd_host is wrong. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Wolfram Sang <wsa@the-dreams.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-05mmc: omap: fix the maximum timeout settingAaro Koskinen1-1/+1
[ Upstream commit a6327b5e57fdc679c842588c3be046c0b39cc127 ] When running OMAP1 kernel on QEMU, MMC access is annoyingly noisy: MMC: CTO of 0xff and 0xfe cannot be used! MMC: CTO of 0xff and 0xfe cannot be used! MMC: CTO of 0xff and 0xfe cannot be used! [ad inf.] Emulator warnings appear to be valid. The TI document SPRU680 [1] ("OMAP5910 Dual-Core Processor MultiMedia Card/Secure Data Memory Card (MMC/SD) Reference Guide") page 36 states that the maximum timeout is 253 cycles and "0xff and 0xfe cannot be used". Fix by using 0xfd as the maximum timeout. Tested using QEMU 2.5 (Siemens SX1 machine, OMAP310), and also checked on real hardware using Palm TE (OMAP310), Nokia 770 (OMAP1710) and Nokia N810 (OMAP2420) that MMC works as before. [1] http://www.ti.com/lit/ug/spru680/spru680.pdf Fixes: 730c9b7e6630f ("[MMC] Add OMAP MMC host driver") Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-27mmc: renesas_sdhi: limit block count to 16 bit for old revisionsWolfram Sang1-1/+7
commit c9a9497ccef205ed4ed2e247011382627876d831 upstream. R-Car Gen2 has two different SDHI incarnations in the same chip. The older one does not support the recently introduced 32 bit register access to the block count register. Make sure we use this feature only after the first known version. Thanks to the Renesas Testing team for this bug report! Fixes: 5603731a15ef ("mmc: tmio: fix access width of Block Count Register") Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Tested-by: Phong Hoang <phong.hoang.wz@renesas.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-27mmc: mxcmmc: "Revert mmc: mxcmmc: handle highmem pages"Alexander Shiyan1-12/+4
commit 2b77158ffa92b820a0c5da9a3c6ead7aa069c71c upstream. This reverts commit b189e7589f6d3411e85c6b7ae6eef158f08f388f. Unable to handle kernel paging request at virtual address c8358000 pgd = efa405c3 [c8358000] *pgd=00000000 Internal error: Oops: 805 [#1] PREEMPT ARM CPU: 0 PID: 711 Comm: kworker/0:2 Not tainted 4.20.0+ #30 Hardware name: Freescale i.MX27 (Device Tree Support) Workqueue: events mxcmci_datawork PC is at mxcmci_datawork+0xbc/0x2ac LR is at mxcmci_datawork+0xac/0x2ac pc : [<c04e33c8>] lr : [<c04e33b8>] psr: 60000013 sp : c6c93f08 ip : 24004180 fp : 00000008 r10: c8358000 r9 : c78b3e24 r8 : c6c92000 r7 : 00000000 r6 : c7bb8680 r5 : c7bb86d4 r4 : c78b3de0 r3 : 00002502 r2 : c090b2e0 r1 : 00000880 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 0005317f Table: a68a8000 DAC: 00000055 Process kworker/0:2 (pid: 711, stack limit = 0x389543bc) Stack: (0xc6c93f08 to 0xc6c94000) 3f00: c7bb86d4 00000000 00000000 c6cbfde0 c7bb86d4 c7ee4200 3f20: 00000000 c0907ea8 00000000 c7bb86d8 c0907ea8 c012077c c6cbfde0 c7bb86d4 3f40: c6cbfde0 c6c92000 c6cbfdf4 c09280ba c0907ea8 c090b2e0 c0907ebc c0120c18 3f60: c6cbfde0 00000000 00000000 c6cbb580 c7ba7c40 c7837edc c6cbb598 00000000 3f80: c6cbfde0 c01208f8 00000000 c01254fc c7ba7c40 c0125400 00000000 00000000 3fa0: 00000000 00000000 00000000 c01010d0 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [<c04e33c8>] (mxcmci_datawork) from [<c012077c>] (process_one_work+0x1f0/0x338) [<c012077c>] (process_one_work) from [<c0120c18>] (worker_thread+0x320/0x474) [<c0120c18>] (worker_thread) from [<c01254fc>] (kthread+0xfc/0x118) [<c01254fc>] (kthread) from [<c01010d0>] (ret_from_fork+0x14/0x24) Exception stack(0xc6c93fb0 to 0xc6c93ff8) 3fa0: 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 Code: e3500000 1a000059 e5153050 e5933038 (e48a3004) ---[ end trace 54ca629b75f0e737 ]--- note: kworker/0:2[711] exited with preempt_count 1 Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Fixes: b189e7589f6d ("mmc: mxcmmc: handle highmem pages") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-27mmc: pxamci: fix enum type confusionArnd Bergmann1-1/+1
commit e60a582bcde01158a64ff948fb799f21f5d31a11 upstream. clang points out several instances of mismatched types in this drivers, all coming from a single declaration: drivers/mmc/host/pxamci.c:193:15: error: implicit conversion from enumeration type 'enum dma_transfer_direction' to different enumeration type 'enum dma_data_direction' [-Werror,-Wenum-conversion] direction = DMA_DEV_TO_MEM; ~ ^~~~~~~~~~~~~~ drivers/mmc/host/pxamci.c:212:62: error: implicit conversion from enumeration type 'enum dma_data_direction' to different enumeration type 'enum dma_transfer_direction' [-Werror,-Wenum-conversion] tx = dmaengine_prep_slave_sg(chan, data->sg, host->dma_len, direction, The behavior is correct, so this must be a simply typo from dma_data_direction and dma_transfer_direction being similarly named types with a similar purpose. Fixes: 6464b7140951 ("mmc: pxamci: switch over to dmaengine use") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23mmc:fix a bug when max_discard is 0Jiong Wu1-2/+2
commit d4721339dcca7def04909a8e60da43c19a24d8bf upstream. The original purpose of the code I fix is to replace max_discard with max_trim if max_trim is less than max_discard. When max_discard is 0 we should replace max_discard with max_trim as well, because max_discard equals 0 happens only when the max_do_calc_max_discard process is overflowed, so if mmc_can_trim(card) is true, max_discard should be replaced by an available max_trim. However, in the original code, there are two lines of code interfere the right process. 1) if (max_discard && mmc_can_trim(card)) when max_discard is 0, it skips the process checking if max_discard needs to be replaced with max_trim. 2) if (max_trim < max_discard) the condition is false when max_discard is 0. it also skips the process that replaces max_discard with max_trim, in fact, we should replace the 0-valued max_discard with max_trim. Signed-off-by: Jiong Wu <Lohengrin1024@gmail.com> Fixes: b305882fbc87 (mmc: core: optimize mmc_calc_max_discard) Cc: stable@vger.kernel.org # v4.17+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23mmc: sdhci-esdhc-imx: fix HS400 timing issueBOUGH CHEN1-0/+1
commit de0a0decf2edfc5b0c782915f4120cf990a9bd13 upstream. Now tuning reset will be done when the timing is MMC_TIMING_LEGACY/ MMC_TIMING_MMC_HS/MMC_TIMING_SD_HS. But for timing MMC_TIMING_MMC_HS, we can not do tuning reset, otherwise HS400 timing is not right. Here is the process of init HS400, first finish tuning in HS200 mode, then switch to HS mode and 8 bit DDR mode, finally switch to HS400 mode. If we do tuning reset in HS mode, this will cause HS400 mode lost the tuning setting, which will cause CRC error. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Cc: stable@vger.kernel.org # v4.12+ Acked-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: d9370424c948 ("mmc: sdhci-esdhc-imx: reset tuning circuit when power on mmc card") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-05mmc: sdhci-esdhc-imx: correct the fix of ERR004536BOUGH CHEN1-4/+5
commit e30be063d6dbcc0f18b1eb25fa709fdef89201fb upstream. Commit 18094430d6b5 ("mmc: sdhci-esdhc-imx: add ADMA Length Mismatch errata fix") involve the fix of ERR004536, but the fix is incorrect. Double confirm with IC, need to clear the bit 7 of register 0x6c rather than set this bit 7. Here is the definition of bit 7 of 0x6c: 0: enable the new IC fix for ERR004536 1: do not use the IC fix, keep the same as before Find this issue on i.MX845s-evk board when enable CMDQ, and let system in heavy loading. root@imx8mmevk:~# dd if=/dev/mmcblk2 of=/dev/null bs=1M & root@imx8mmevk:~# memtester 1000M > /dev/zero & root@imx8mmevk:~# [ 139.897220] mmc2: cqhci: timeout for tag 16 [ 139.901417] mmc2: cqhci: ============ CQHCI REGISTER DUMP =========== [ 139.907862] mmc2: cqhci: Caps: 0x0000310a | Version: 0x00000510 [ 139.914311] mmc2: cqhci: Config: 0x00001001 | Control: 0x00000000 [ 139.920753] mmc2: cqhci: Int stat: 0x00000000 | Int enab: 0x00000006 [ 139.927193] mmc2: cqhci: Int sig: 0x00000006 | Int Coal: 0x00000000 [ 139.933634] mmc2: cqhci: TDL base: 0x7809c000 | TDL up32: 0x00000000 [ 139.940073] mmc2: cqhci: Doorbell: 0x00030000 | TCN: 0x00000000 [ 139.946518] mmc2: cqhci: Dev queue: 0x00010000 | Dev Pend: 0x00010000 [ 139.952967] mmc2: cqhci: Task clr: 0x00000000 | SSC1: 0x00011000 [ 139.959411] mmc2: cqhci: SSC2: 0x00000001 | DCMD rsp: 0x00000000 [ 139.965857] mmc2: cqhci: RED mask: 0xfdf9a080 | TERRI: 0x00000000 [ 139.972308] mmc2: cqhci: Resp idx: 0x0000002e | Resp arg: 0x00000900 [ 139.978761] mmc2: sdhci: ============ SDHCI REGISTER DUMP =========== [ 139.985214] mmc2: sdhci: Sys addr: 0xb2c19000 | Version: 0x00000002 [ 139.991669] mmc2: sdhci: Blk size: 0x00000200 | Blk cnt: 0x00000400 [ 139.998127] mmc2: sdhci: Argument: 0x40110400 | Trn mode: 0x00000033 [ 140.004618] mmc2: sdhci: Present: 0x01088a8f | Host ctl: 0x00000030 [ 140.011113] mmc2: sdhci: Power: 0x00000002 | Blk gap: 0x00000080 [ 140.017583] mmc2: sdhci: Wake-up: 0x00000008 | Clock: 0x0000000f [ 140.024039] mmc2: sdhci: Timeout: 0x0000008f | Int stat: 0x00000000 [ 140.030497] mmc2: sdhci: Int enab: 0x107f4000 | Sig enab: 0x107f4000 [ 140.036972] mmc2: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000502 [ 140.043426] mmc2: sdhci: Caps: 0x07eb0000 | Caps_1: 0x8000b407 [ 140.049867] mmc2: sdhci: Cmd: 0x00002c1a | Max curr: 0x00ffffff [ 140.056314] mmc2: sdhci: Resp[0]: 0x00000900 | Resp[1]: 0xffffffff [ 140.062755] mmc2: sdhci: Resp[2]: 0x328f5903 | Resp[3]: 0x00d00f00 [ 140.069195] mmc2: sdhci: Host ctl2: 0x00000008 [ 140.073640] mmc2: sdhci: ADMA Err: 0x00000007 | ADMA Ptr: 0x7809c108 [ 140.080079] mmc2: sdhci: ============================================ [ 140.086662] mmc2: running CQE recovery Fixes: 18094430d6b5 ("mmc: sdhci-esdhc-imx: add ADMA Length Mismatch errata fix") Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-05mmc: cqhci: Fix a tiny potential memory leak on error conditionAlamy Liu1-1/+10
commit d07e9fadf3a6b466ca3ae90fa4859089ff20530f upstream. Free up the allocated memory in the case of error return The value of mmc_host->cqe_enabled stays 'false'. Thus, cqhci_disable (mmc_cqe_ops->cqe_disable) won't be called to free the memory. Also, cqhci_disable() seems to be designed to disable and free all resources, not suitable to handle this corner case. Fixes: a4080225f51d ("mmc: cqhci: support for command queue enabled host") Signed-off-by: Alamy Liu <alamy.liu@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-05mmc: cqhci: fix space allocated for transfer descriptorAlamy Liu1-1/+1
commit 27ec9dc17c48ea2e642ccb90b4ebf7fd47468911 upstream. There is not enough space being allocated when DCMD is disabled. CQE_DCMD is not necessary to be enabled when CQE is enabled. (Software could halt CQE to send command) In the case that CQE_DCMD is not enabled, it still needs to allocate space for data transfer. For instance: CQE_DCMD is enabled: 31 slots space (one slot used by DCMD) CQE_DCMD is disabled: 32 slots space Fixes: a4080225f51d ("mmc: cqhci: support for command queue enabled host") Signed-off-by: Alamy Liu <alamy.liu@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-05mmc: core: Fix NULL ptr crash from mmc_should_fail_requestRitesh Harjani1-1/+1
commit e5723f95d6b493dd437f1199cacb41459713b32f upstream. In case of CQHCI, mrq->cmd may be NULL for data requests (non DCMD). In such case mmc_should_fail_request is directly dereferencing mrq->cmd while cmd is NULL. Fix this by checking for mrq->cmd pointer. Fixes: 72a5af554df8 ("mmc: core: Add support for handling CQE requests") Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-05mmc: tmio: fix access width of Block Count RegisterTakeshi Saito3-1/+11
commit 5603731a15ef9ca317c122cc8c959f1dee1798b4 upstream. In R-Car Gen2 or later, the maximum number of transfer blocks are changed from 0xFFFF to 0xFFFFFFFF. Therefore, Block Count Register should use iowrite32(). If another system (U-boot, Hypervisor OS, etc) uses bit[31:16], this value will not be cleared. So, SD/MMC card initialization fails. So, check for the bigger register and use apropriate write. Also, mark the register as extended on Gen2. Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com> [wsa: use max_blk_count in if(), add Gen2, update commit message] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: stable@kernel.org Reviewed-by: Simon Horman <horms+renesas@verge.net.au> [Ulf: Fixed build error] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-05mmc: tmio_mmc_core: don't claim spurious interruptsSergei Shtylyov1-4/+7
commit 5c27ff5db1491a947264d6d4e4cbe43ae6535bae upstream. I have encountered an interrupt storm during the eMMC chip probing (and the chip finally didn't get detected). It turned out that U-Boot left the DMAC interrupts enabled while the Linux driver didn't use those. The SDHI driver's interrupt handler somehow assumes that, even if an SDIO interrupt didn't happen, it should return IRQ_HANDLED. I think that if none of the enabled interrupts happened and got handled, we should return IRQ_NONE -- that way the kernel IRQ code recoginizes a spurious interrupt and masks it off pretty quickly... Fixes: 7729c7a232a9 ("mmc: tmio: Provide separate interrupt handlers") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-05mmc: spi: Fix card detection during probeJonathan Neuschäfer1-0/+1
commit c9bd505dbd9d3dc80c496f88eafe70affdcf1ba6 upstream. When using the mmc_spi driver with a card-detect pin, I noticed that the card was not detected immediately after probe, but only after it was unplugged and plugged back in (and the CD IRQ fired). The call tree looks something like this: mmc_spi_probe mmc_add_host mmc_start_host _mmc_detect_change mmc_schedule_delayed_work(&host->detect, 0) mmc_rescan host->bus_ops->detect(host) mmc_detect _mmc_detect_card_removed host->ops->get_cd(host) mmc_gpio_get_cd -> -ENOSYS (ctx->cd_gpio not set) mmc_gpiod_request_cd ctx->cd_gpio = desc To fix this issue, call mmc_detect_change after the card-detect GPIO/IRQ is registered. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-23mmc: meson-gx: fix interrupt nameMartin Blumenstingl1-1/+2
commit 83e418a805d880a8b18add07f94d19b2a5a80307 upstream. Commit bb364890323cca ("mmc: meson-gx: Free irq in release() callback") changed the _probe code to use request_threaded_irq() instead of devm_request_threaded_irq(). Unfortunately this removes a fallback for the interrupt name: devm_request_threaded_irq() uses the device name as fallback if the given IRQ name is NULL. request_threaded_irq() has no such fallback, thus /proc/interrupts shows "(null)" instead. Explicitly pass the dev_name() so we get the IRQ name shown in /proc/interrupts again. While here, also fix the indentation of the request_threaded_irq() parameter list. Fixes: bb364890323cca ("mmc: meson-gx: Free irq in release() callback") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-20mmc: block: handle complete_work on separate workqueueZachary Hays1-1/+9
commit dcf6e2e38a1c7ccbc535de5e1d9b14998847499d upstream. The kblockd workqueue is created with the WQ_MEM_RECLAIM flag set. This generates a rescuer thread for that queue that will trigger when the CPU is under heavy load and collect the uncompleted work. In the case of mmc, this creates the possibility of a deadlock when there are multiple partitions on the device as other blk-mq work is also run on the same queue. For example: - worker 0 claims the mmc host to work on partition 1 - worker 1 attempts to claim the host for partition 2 but has to wait for worker 0 to finish - worker 0 schedules complete_work to release the host - rescuer thread is triggered after time-out and collects the dangling work - rescuer thread attempts to complete the work in order starting with claim host - the task to release host is now blocked by a task to claim it and will never be called The above results in multiple hung tasks that lead to failures to mount partitions. Handling complete_work on a separate workqueue avoids this by keeping the work completion tasks separate from the other blk-mq work. This allows the host to be released without getting blocked by other tasks attempting to claim the host. Signed-off-by: Zachary Hays <zhays@lexmark.com> Fixes: 81196976ed94 ("mmc: block: Add blk-mq support") Cc: <stable@vger.kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-20mmc: sunxi: Filter out unsupported modes declared in the device treeChen-Yu Tsai1-0/+15
commit d6f11e7d91f2ac85f66194fe3ef8789b49901d64 upstream. The MMC device tree bindings include properties used to signal various signalling speed modes. Until now the sunxi driver was accepting them without any further filtering, while the sunxi device trees were not actually using them. Since some of the H5 boards can not run at higher speed modes stably, we are resorting to declaring the higher speed modes per-board. Regardless, having boards declare modes and blindly following them, even without proper support in the driver, is generally a bad thing. Filter out all unsupported modes from the capabilities mask after the device tree properties have been parsed. Cc: <stable@vger.kernel.org> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-12mmc: jz4740: Get CD/WP GPIOs from descriptorsLinus Walleij1-10/+10
[ Upstream commit 0c901c0566fb4edc2631c3786e5085a037be91f8 ] Modifty the JZ4740 driver to retrieve card detect and write protect GPIO pins from GPIO descriptors instead of hard-coded global numbers. Augment the only board file using this in the process and cut down on passed in platform data. Preserve the code setting the caps2 flags for CD and WP as active low or high since the slot GPIO code currently ignores the gpiolib polarity inversion semantice and uses the raw accessors to read the GPIO lines, but set the right polarity flags in the descriptor table for jz4740. Cc: Paul Cercueil <paul@crapouillou.net> Cc: linux-mips@linux-mips.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Paul Burton <paul.burton@mips.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-12mmc: sdhci-xenon: Fix timeout checksAdrian Hunter2-6/+14
[ Upstream commit 0e6e7c2ff397e1bbebc882ca3132148aaaef1ddd ] Always check the wait condition before returning timeout. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Zhoujie Wu <zjwu@marvell.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-12mmc: sdhci-omap: Fix timeout checksAdrian Hunter1-4/+12
[ Upstream commit 9f0ea0bda1d06120b053bb0c283f54afec59293d ] Always check the wait condition before returning timeout. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-12mmc: sdhci-of-esdhc: Fix timeout checksAdrian Hunter1-4/+12
[ Upstream commit ea6d027312111c6d96309ad1a684b33cb37e6764 ] Always check the wait condition before returning timeout. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-12mmc: meson-mx-sdio: check devm_kasprintf for failureNicholas Mc Guire1-0/+6
[ Upstream commit b0d06f1cb0e2079a3c64fb6e27c19d9a55c723a1 ] devm_kasprintf() may return NULL on failure of internal allocation thus the assignments to init.name are not safe if not checked. On error meson_mx_mmc_register_clks() returns negative values so -ENOMEM in the (unlikely) failure case of devm_kasprintf() should be fine here. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Fixes: ed80a13bb4c4 ("mmc: meson-mx-sdio: Add a driver for the Amlogic Meson8 and Meson8b SoCs") Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-12mmc: bcm2835: reset host on timeoutMichal Suchanek1-0/+3
[ Upstream commit f6000a4eb34e6462bc0dd39809c1bb99f9633269 ] The bcm2835 mmc host tends to lock up for unknown reason so reset it on timeout. The upper mmc block layer tries retransimitting with single blocks which tends to work out after a long wait. This is better than giving up and leaving the machine broken for no obvious reason. Fixes: 660fc733bd74 ("mmc: bcm2835: Add new driver for the sdhost controller.") Signed-off-by: Michal Suchanek <msuchanek@suse.de> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Eric Anholt <eric@anholt.net> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-12mmc: bcm2835: Recover from MMC_SEND_EXT_CSDPhil Elwell1-0/+9
[ Upstream commit 07d405769afea5718529fc9e341f0b13b3189b6f ] If the user issues an "mmc extcsd read", the SD controller receives what it thinks is a SEND_IF_COND command with an unexpected data block. The resulting operations leave the FSM stuck in READWAIT, a state which persists until the MMC framework resets the controller, by which point the root filesystem is likely to have been unmounted. A less heavyweight solution is to detect the condition and nudge the FSM by asserting the (self-clearing) FORCE_DATA_MODE bit. Link: https://github.com/raspberrypi/linux/issues/2728 Signed-off-by: Phil Elwell <phil@raspberrypi.org> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Eric Anholt <eric@anholt.net> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-02-06mmc: sdhci-iproc: handle mmc_of_parse() errors during probeStefan Wahren1-1/+4
commit 2bd44dadd5bfb4135162322fd0b45a174d4ad5bf upstream. We need to handle mmc_of_parse() errors during probe. This finally fixes the wifi regression on Raspberry Pi 3 series. In error case the wifi chip was permanently in reset because of the power sequence depending on the deferred probe of the GPIO expander. Fixes: b580c52d58d9 ("mmc: sdhci-iproc: add IPROC SDHCI driver") Cc: stable@vger.kernel.org Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-06mmc: mediatek: fix incorrect register setting of hs400_cmd_int_delayChaotian Jing1-1/+1
commit 3751e008da0df4384031bd66a516c0292f915605 upstream. to set cmd internal delay, need set PAD_TUNE register but not PAD_CMD_TUNE register. Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Fixes: 1ede5cb88a29 ("mmc: mediatek: Use data tune for CMD line tune") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-06mmc: bcm2835: Fix DMA channel leak on probe errorLukas Wunner1-0/+2
commit 8c9620b1cc9b69e82fa8d4081d646d0016b602e7 upstream. The BCM2835 MMC host driver requests a DMA channel on probe but neglects to release the channel in the probe error path. The channel may therefore be leaked, in particular if devm_clk_get() causes probe deferral. Fix it. Fixes: 660fc733bd74 ("mmc: bcm2835: Add new driver for the sdhost controller.") Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v4.12+ Cc: Frank Pavlic <f.pavlic@kunbus.de> Tested-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-31mmc: meson-gx: Free irq in release() callbackRemi Pommarel1-7/+11
commit bb364890323cca6e43f13e86d190ebf34a7d8cea upstream. Because the irq was requested through device managed resources API (devm_request_threaded_irq()) it was freed after meson_mmc_remove() completion, thus after mmc_free_host() has reclaimed meson_host memory. As this irq is IRQF_SHARED, while using CONFIG_DEBUG_SHIRQ, its handler get called by free_irq(). So meson_mmc_irq() was called after the meson_host memory reclamation and was using invalid memory. We ended up with the following scenario: device_release_driver() meson_mmc_remove() mmc_free_host() /* Freeing host memory */ ... devres_release_all() devm_irq_release() __free_irq() meson_mmc_irq() /* Uses freed memory */ To avoid this, the irq is released in meson_mmc_remove() and in mseon_mmc_probe() error path before mmc_free_host() gets called. Reported-by: Elie Roudninski <xademax@gmail.com> Signed-off-by: Remi Pommarel <repk@triplefau.lt> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-31mmc: dw_mmc-bluefield: : Fix the license informationLiming Sun1-5/+0
commit f3716b8ae9347797b73896725f192c3a7b0069b5 upstream. The SPDX license identifier and the boiler plate text are contradicting. Only the SPDX license identifier is needed. The other one is removed. Fixes: 86958dcc5ad7 ("mmc: dw_mmc-bluefield: Add driver extension") Cc: stable@vger.kernel.org Reviewed-by: David Woods <dwoods@mellanox.com> Signed-off-by: Liming Sun <lsun@mellanox.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-26mmc: atmel-mci: do not assume idle after atmci_request_endJonas Danielsson1-1/+2
[ Upstream commit ae460c115b7aa50c9a36cf78fced07b27962c9d0 ] On our AT91SAM9260 board we use the same sdio bus for wifi and for the sd card slot. This caused the atmel-mci to give the following splat on the serial console: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 538 at drivers/mmc/host/atmel-mci.c:859 atmci_send_command+0x24/0x44 Modules linked in: CPU: 0 PID: 538 Comm: mmcqd/0 Not tainted 4.14.76 #14 Hardware name: Atmel AT91SAM9 [<c000fccc>] (unwind_backtrace) from [<c000d3dc>] (show_stack+0x10/0x14) [<c000d3dc>] (show_stack) from [<c0017644>] (__warn+0xd8/0xf4) [<c0017644>] (__warn) from [<c0017704>] (warn_slowpath_null+0x1c/0x24) [<c0017704>] (warn_slowpath_null) from [<c033bb9c>] (atmci_send_command+0x24/0x44) [<c033bb9c>] (atmci_send_command) from [<c033e984>] (atmci_start_request+0x1f4/0x2dc) [<c033e984>] (atmci_start_request) from [<c033f3b4>] (atmci_request+0xf0/0x164) [<c033f3b4>] (atmci_request) from [<c0327108>] (mmc_start_request+0x280/0x2d0) [<c0327108>] (mmc_start_request) from [<c032800c>] (mmc_start_areq+0x230/0x330) [<c032800c>] (mmc_start_areq) from [<c03366f8>] (mmc_blk_issue_rw_rq+0xc4/0x310) [<c03366f8>] (mmc_blk_issue_rw_rq) from [<c03372c4>] (mmc_blk_issue_rq+0x118/0x5ac) [<c03372c4>] (mmc_blk_issue_rq) from [<c033781c>] (mmc_queue_thread+0xc4/0x118) [<c033781c>] (mmc_queue_thread) from [<c002daf8>] (kthread+0x100/0x118) [<c002daf8>] (kthread) from [<c000a580>] (ret_from_fork+0x14/0x34) ---[ end trace 594371ddfa284bd6 ]--- This is: WARN_ON(host->cmd); This was fixed on our board by letting atmci_request_end determine what state we are in. Instead of unconditionally setting it to STATE_IDLE on STATE_END_REQUEST. Signed-off-by: Jonas Danielsson <jonas@orbital-systems.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-01-22mmc: sdhci-msm: Disable CDR function on TXLoic Poulain1-1/+42
commit a89e7bcb18081c611eb6cf50edd440fa4983a71a upstream. The Clock Data Recovery (CDR) circuit allows to automatically adjust the RX sampling-point/phase for high frequency cards (SDR104, HS200...). CDR is automatically enabled during DLL configuration. However, according to the APQ8016 reference manual, this function must be disabled during TX and tuning phase in order to prevent any interferences during tuning challenges and unexpected phase alteration during TX transfers. This patch enables/disables CDR according to the current transfer mode. This fixes sporadic write transfer issues observed with some SDR104 and HS200 cards. Inspired by sdhci-msm downstream patch: https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/432516/ Reported-by: Leonid Segal <leonid.s@variscite.com> Reported-by: Manabu Igusa <migusa@arrowjapan.com> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> [georgi: backport to v4.19+] Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-29mmc: omap_hsmmc: fix DMA API warningRussell King1-1/+11
commit 0b479790684192ab7024ce6a621f93f6d0a64d92 upstream. While booting with rootfs on MMC, the following warning is encountered on OMAP4430: omap-dma-engine 4a056000.dma-controller: DMA-API: mapping sg segment longer than device claims to support [len=69632] [max=65536] This is because the DMA engine has a default maximum segment size of 64K but HSMMC sets: mmc->max_blk_size = 512; /* Block Length at max can be 1024 */ mmc->max_blk_count = 0xFFFF; /* No. of Blocks is 16 bits */ mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; mmc->max_seg_size = mmc->max_req_size; which ends up telling the block layer that we support a maximum segment size of 65535*512, which exceeds the advertised DMA engine capabilities. Fix this by clamping the maximum segment size to the lower of the maximum request size and of the DMA engine device used for either DMA channel. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-29mmc: core: Use a minimum 1600ms timeout when enabling CACHE ctrlUlf Hansson1-4/+10
commit e3ae3401aa19432ee4943eb0bbc2ec704d07d793 upstream. Some eMMCs from Micron have been reported to need ~800 ms timeout, while enabling the CACHE ctrl after running sudden power failure tests. The needed timeout is greater than what the card specifies as its generic CMD6 timeout, through the EXT_CSD register, hence the problem. Normally we would introduce a card quirk to extend the timeout for these specific Micron cards. However, due to the rather complicated debug process needed to find out the error, let's simply use a minimum timeout of 1600ms, the double of what has been reported, for all cards when enabling CACHE ctrl. Reported-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reported-by: Andreas Dannenberg <dannenberg@ti.com> Reported-by: Faiz Abbas <faiz_abbas@ti.com> Cc: <stable@vger.kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-29mmc: core: Allow BKOPS and CACHE ctrl even if no HPI supportUlf Hansson1-4/+2
commit ba9f39a785a9977e72233000711ef1eb48203551 upstream. In commit 5320226a0512 ("mmc: core: Disable HPI for certain Hynix eMMC cards"), then intent was to prevent HPI from being used for some eMMC cards, which didn't properly support it. However, that went too far, as even BKOPS and CACHE ctrl became prevented. Let's restore those parts and allow BKOPS and CACHE ctrl even if HPI isn't supported. Fixes: 5320226a0512 ("mmc: core: Disable HPI for certain Hynix eMMC cards") Cc: Pratibhasagar V <pratibha@codeaurora.org> Cc: <stable@vger.kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-29mmc: core: Reset HPI enabled state during re-init and in case of errorsUlf Hansson1-1/+3
commit a0741ba40a009f97c019ae7541dc61c1fdf41efb upstream. During a re-initialization of the eMMC card, we may fail to re-enable HPI. In these cases, that isn't properly reflected in the card->ext_csd.hpi_en bit, as it keeps being set. This may cause following attempts to use HPI, even if's not enabled. Let's fix this! Fixes: eb0d8f135b67 ("mmc: core: support HPI send command") Cc: <stable@vger.kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19mmc: sdhci: fix the timeout check window for clock and resetAlek Du1-5/+13
commit b704441e38f645dcfba1348ca3cc1ba43d1a9f31 upstream. We observed some premature timeouts on a virtualization platform, the log is like this: case 1: [159525.255629] mmc1: Internal clock never stabilised. [159525.255818] mmc1: sdhci: ============ SDHCI REGISTER DUMP =========== [159525.256049] mmc1: sdhci: Sys addr: 0x00000000 | Version: 0x00001002 ... [159525.257205] mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x0000fa03 From the clock control register dump, we are pretty sure the clock was stablized. case 2: [ 914.550127] mmc1: Reset 0x2 never completed. [ 914.550321] mmc1: sdhci: ============ SDHCI REGISTER DUMP =========== [ 914.550608] mmc1: sdhci: Sys addr: 0x00000010 | Version: 0x00001002 After checking the sdhci code, we found the timeout check actually has a little window that the CPU can be scheduled out and when it comes back, the original time set or check is not valid. Fixes: 5a436cc0af62 ("mmc: sdhci: Optimize delay loops") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Alek Du <alek.du@intel.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19mmc: sdhci-omap: Fix DCRC error handling during tuningFaiz Abbas1-4/+8
commit db2039fcfd5754d15986340152e4503737f68f8d upstream. Commit 7d33c3581536 ("mmc: sdhci-omap: Workaround for Errata i802") disabled DCRC interrupts during tuning. This write to the interrupt enable register gets overwritten in sdhci_prepare_data() and the interrupt is not in fact disabled. Fix this by disabling the interrupt in the host->ier variable. Fixes: 7d33c3581536 ("mmc: sdhci-omap: Workaround for Errata i802") Cc: <stable@vger.kernel.org> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19mmc: core: use mrq->sbc when sending CMD23 for RPMBWolfram Sang1-5/+10
commit a44f7cb937321d4961bfc8f28912126b06e701c5 upstream. When sending out CMD23 in the blk preparation, the comment there rightfully says: * However, it is not sufficient to just send CMD23, * and avoid the final CMD12, as on an error condition * CMD12 (stop) needs to be sent anyway. This, coupled * with Auto-CMD23 enhancements provided by some * hosts, means that the complexity of dealing * with this is best left to the host. If CMD23 is * supported by card and host, we'll fill sbc in and let * the host deal with handling it correctly. Let's do this behaviour for RPMB as well, and not send CMD23 independently. Otherwise IP cores (like Renesas SDHI) may timeout because of automatic CMD23/CMD12 handling. Reported-by: Masaharu Hayakawa <masaharu.hayakawa.ry@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Clément Péron <peron.clem@gmail.com> Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19MMC: OMAP: fix broken MMC on OMAP15XX/OMAP5910/OMAP310Aaro Koskinen1-2/+9
commit e8cde625bfe8a714a856e1366bcbb259d7346095 upstream. Since v2.6.22 or so there has been reports [1] about OMAP MMC being broken on OMAP15XX based hardware (OMAP5910 and OMAP310). The breakage seems to have been caused by commit 46a6730e3ff9 ("mmc-omap: Fix omap to use MMC_POWER_ON") that changed clock enabling to be done on MMC_POWER_ON. This can happen multiple times in a row, and on 15XX the hardware doesn't seem to like it and the MMC just stops responding. Fix by memorizing the power mode and do the init only when necessary. Before the patch (on Palm TE): mmc0: new SD card at address b368 mmcblk0: mmc0:b368 SDC 977 MiB mmci-omap mmci-omap.0: command timeout (CMD18) mmci-omap mmci-omap.0: command timeout (CMD13) mmci-omap mmci-omap.0: command timeout (CMD13) mmci-omap mmci-omap.0: command timeout (CMD12) [x 6] mmci-omap mmci-omap.0: command timeout (CMD13) [x 6] mmcblk0: error -110 requesting status mmci-omap mmci-omap.0: command timeout (CMD8) mmci-omap mmci-omap.0: command timeout (CMD18) mmci-omap mmci-omap.0: command timeout (CMD13) mmci-omap mmci-omap.0: command timeout (CMD13) mmci-omap mmci-omap.0: command timeout (CMD12) [x 6] mmci-omap mmci-omap.0: command timeout (CMD13) [x 6] mmcblk0: error -110 requesting status mmcblk0: recovery failed! print_req_error: I/O error, dev mmcblk0, sector 0 Buffer I/O error on dev mmcblk0, logical block 0, async page read mmcblk0: unable to read partition table After the patch: mmc0: new SD card at address b368 mmcblk0: mmc0:b368 SDC 977 MiB mmcblk0: p1 The patch is based on a fix and analysis done by Ladislav Michl. Tested on OMAP15XX/OMAP310 (Palm TE), OMAP1710 (Nokia 770) and OMAP2420 (Nokia N810). [1] https://marc.info/?t=123175197000003&r=1&w=2 Fixes: 46a6730e3ff9 ("mmc-omap: Fix omap to use MMC_POWER_ON") Reported-by: Ladislav Michl <ladis@linux-mips.org> Reported-by: Andrzej Zaborowski <balrogg@gmail.com> Tested-by: Ladislav Michl <ladis@linux-mips.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-01mmc: sdhci-pci: Workaround GLK firmware failing to restore the tuning valueAdrian Hunter1-2/+77
commit 5305ec6a27b2dc7398a689e661a4a2e951026f09 upstream. GLK firmware can indicate that the tuning value will be restored after runtime suspend, but not actually do that. Add a workaround that detects such cases, and lets the driver do re-tuning instead. Reported-by: Anisse Astier <anisse@astier.eu> Tested-by: Anisse Astier <anisse@astier.eu> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-01mmc: sdhci-pci: Try "cd" for card-detect lookup before using NULLRajat Jain1-1/+6
commit cdcefe6bd9df754f528ffc339d3cc143cea4ddf6 upstream. Problem: The card detect IRQ does not work with modern BIOS (that want to use _DSD to provide the card detect GPIO to the driver). Details: The mmc core provides the mmc_gpiod_request_cd() API to let host drivers request the gpio descriptor for the "card detect" pin. This pin is specified in the ACPI for the SDHC device: * Either as a resource using _CRS. This is a method used by legacy BIOS. (The driver needs to tell which resource index). * Or as a named property ("cd-gpios"/"cd-gpio") in _DSD (which internally points to an entry in _CRS). This way, the driver can lookup using a string. This is what modern BIOS prefer to use. This API finally results in a call to the following code: struct gpio_desc *acpi_find_gpio(..., const char *con_id,...) { ... /* Lookup gpio (using "<con_id>-gpio") in the _DSD */ ... if (!acpi_can_fallback_to_crs(adev, con_id)) return ERR_PTR(-ENOENT); ... /* Falling back to _CRS is allowed, Lookup gpio in the _CRS */ ... } Note that this means that if the ACPI has _DSD properties, the kernel will never use _CRS for the lookup (Because acpi_can_fallback_to_crs() will always be false for any device hat has _DSD entries). The SDHCI driver is thus currently broken on a modern BIOS, even if BIOS provides both _CRS (for index based lookup) and _DSD entries (for string based lookup). Ironically, none of these will be used for the lookup currently because: * Since the con_id is NULL, acpi_find_gpio() does not find a matching entry in DSDT. (The _DSDT entry has the property name = "cd-gpios") * Because ACPI contains DSDT entries, thus acpi_can_fallback_to_crs() returns false (because device properties have been populated from _DSD), thus the _CRS is never used for the lookup. Fix: Try "cd" for lookup in the _DSD before falling back to using NULL so as to try looking up in the _CRS. I've tested this patch successfully with both Legacy BIOS (that provide only _CRS method) as well as modern BIOS (that provide both _CRS and _DSD). Also the use of "cd" appears to be fairly consistent across other users of this API (other MMC host controller drivers). Link: https://lkml.org/lkml/2018/9/25/1113 Signed-off-by: Rajat Jain <rajatja@google.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: f10e4bf6632b ("gpio: acpi: Even more tighten up ACPI GPIO lookups") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13sdhci: acpi: add free_slot callbackWang Dongsheng1-0/+8
[ Upstream commit c7eabbee3de99347105faa7fd925a500ccf43baf ] The device specific resource can be free in free_slot after removing host controller. Signed-off-by: Wang Dongsheng <dongsheng.wang@hxt-semitech.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13mmc: sdhci-pci-o2micro: Add quirk for O2 Micro dev 0x8620 rev 0x01Yu Zhao1-0/+3
[ Upstream commit 5169894982bb67486d93cc1e10151712bb86bcb6 ] This device reports SDHCI_CLOCK_INT_STABLE even though it's not ready to take SDHCI_CLOCK_CARD_EN. The symptom is that reading SDHCI_CLOCK_CONTROL after enabling the clock shows absence of the bit from the register (e.g. expecting 0x0000fa07 = 0x0000fa03 | SDHCI_CLOCK_CARD_EN but only observed the first operand). mmc1: Timeout waiting for hardware cmd interrupt. mmc1: sdhci: ============ SDHCI REGISTER DUMP =========== mmc1: sdhci: Sys addr: 0x00000000 | Version: 0x00000603 mmc1: sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000 mmc1: sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 mmc1: sdhci: Present: 0x01ff0001 | Host ctl: 0x00000001 mmc1: sdhci: Power: 0x0000000f | Blk gap: 0x00000000 mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x0000fa03 mmc1: sdhci: Timeout: 0x00000000 | Int stat: 0x00000000 mmc1: sdhci: Int enab: 0x00ff0083 | Sig enab: 0x00ff0083 mmc1: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 mmc1: sdhci: Caps: 0x25fcc8bf | Caps_1: 0x00002077 mmc1: sdhci: Cmd: 0x00000000 | Max curr: 0x005800c8 mmc1: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x00000000 mmc1: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000 mmc1: sdhci: Host ctl2: 0x00000008 mmc1: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000 mmc1: sdhci: ============================================ The problem happens during wakeup from S3. Adding a delay quirk after power up reliably fixes the problem. Signed-off-by: Yu Zhao <yuzhao@google.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-09mmc: block: avoid multiblock reads for the last sector in SPI modeChris Boot1-0/+10
On some SD cards over SPI, reading with the multiblock read command the last sector will leave the card in a bad state. Remove last sectors from the multiblock reading cmd. Signed-off-by: Chris Boot <bootc@bootc.net> Signed-off-by: Clément Péron <peron.clem@gmail.com> Cc: stable@vger.kernel.org # v4.10+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-09-28mmc: slot-gpio: Fix debounce time to use miliseconds againMarek Szyprowski1-1/+1
The debounce value passed to mmc_gpiod_request_cd() function is in microseconds, but msecs_to_jiffies() requires the value to be in miliseconds to properly calculate the delay, so adjust the value stored in cd_debounce_delay_ms context entry. Fixes: 1d71926bbd59 ("mmc: core: Fix debounce time to use microseconds") Fixes: bfd694d5e21c ("mmc: core: Add tunable delay before detecting card after card is inserted") Cc: stable@vger.kernel.org # v4.18+ Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-09-27mmc: core: Fix debounce time to use microsecondsTony Lindgren1-1/+1
The debounce value in device tree is in milliseconds but needs to be in microseconds for mmc_gpiod_request_cd(). Fixes: bfd694d5e21c ("mmc: core: Add tunable delay before detecting card after card is inserted") Cc: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Cc: stable@vger.kernel.org # v4.18+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-09-17mmc: sdhi: sys_dmac: check for all Gen3 types when whitelistingWolfram Sang1-1/+2
Fixes: 26eb2607fa28 ("mmc: renesas_sdhi: add eMMC HS400 mode support") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-04 05:46:32 +0300