summaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)AuthorFilesLines
2009-03-24sdhci: Add quirk for forcing maximum block size to 2048 bytesAnton Vorontsov2-7/+15
FSL eSDHC controllers can support maximum block size up to 4096 bytes, the MBL (Maximum Block Length) field in the capabilities register extended by one bit, and is set to 0x3. But the SDHCI core doesn't support blocks of 4096 bytes, and thus forces blksz to the lowest value -- 512 bytes. With this patch we can pin up the blksz to the maximum supported block size, i.e. 2048 bytes. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24sdhci: Add quirk for controllers that need IRQ re-init after resetAnton Vorontsov2-0/+9
FSL eSDHC controllers losing signal/interrupt enable states after reset, so we should re-enable them. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24sdhci: Add quirk for controllers that need small delays for PIOAnton Vorontsov2-0/+5
Small udelay is needed to make eSDHC work in PIO mode. Without the delay reading causes endless interrupt storm, and writing corrupts data. The first guess would be that we must wait for some bit in some register, but I didn't find any reliable bits that change before and after the delay. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24sdhci: Add set_clock callback and a quirk for nonstandard clocksAnton Vorontsov2-0/+10
FSL eSDHC hosts have incompatible register map to manage the SDCLK. This patch adds set_clock callback so that drivers could overwrite set_clock behaviour. Similar patch[1] was posted by Ben Dooks, though in Ben's version the callback is named change_clock, plus the patch has some unrelated bits that makes the patch difficult to reuse. [1] http://lkml.org/lkml/2008/12/2/160 Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24sdhci: Add get_{max,timeout}_clock callbacksBen Dooks2-7/+17
Some controllers do not provide clock information in their capabilities (in the Samsung case, it is because there are multiple clock sources available to the controller). Add hooks to allow the system to supply clock information. p.s. In the original Ben's patch there was a bug that makes sdhci_add_host() return -ENODEV even if callbacks were specified. This is fixed now. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24sdhci: Add support for hosts reporting inverted write-protect stateAnton Vorontsov2-0/+4
This patch adds SDHCI_QUIRK_INVERTED_WRITE_PROTECT quirk. When specified, the sdhci driver will invert WP state. p.s. Actually, the quirk is more board-specific than controller-specific. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24sdhci: Add support for card-detection pollingAnton Vorontsov2-2/+17
This patch adds SDHCI_QUIRK_BROKEN_CARD_DETECTION quirk. When specified, sdhci driver will set MMC_CAP_NEEDS_POLL MMC host capability, and won't enable card insert/remove interrupts. This is needed for hosts with unreliable card detection, such as FSL eSDHC. The original eSDHC driver was tring to "debounce" card-detection IRQs by reading present state and disabling particular interrupts. But with this debouncing scheme I noticed that sometimes we miss card insertion/removal events. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24sdhci: Enable only relevant (DMA/PIO) interrupts during transfersAnton Vorontsov1-3/+14
Some hosts (that is, FSL eSDHC) throw PIO interrupts during DMA transfers, this causes tons of unneeded interrupts, and thus highly degraded speed. This patch modifies the driver so that now we only enable relevant (DMA or PIO) interrupts during transfers. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24sdhci: Split card-detection IRQs management from sdhci_init()Anton Vorontsov2-17/+62
Card detection interrupts should be handled separately as they should not be enabled before mmc_add_host() returns and should be disabled before calling mmc_remove_host(). The same is for suspend and resume routines. sdhci_init() no longer enables card-detection irqs. Instead, two new functions implemented: sdhci_enable_card_detection() and sdhci_disable_card_detection(). New sdhci_reinit() call implemented to behave the same way as the old sdhci_init(). Also, this patch implements and uses few new helpers to manage IRQs in a more conveinient way, that is: - sdhci_clear_set_irqs() - sdhci_unmask_irqs() - sdhci_mask_irqs() - SDHCI_INT_ALL_MASK constant sdhci_enable_sdio_irq() converted to these new helpers, plus the helpers will be used by the subsequent patches. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24sdhci: Add support for bus-specific IO memory accessorsAnton Vorontsov3-81/+180
Currently the SDHCI driver works with PCI accessors (write{l,b,w} and read{l,b,w}). With this patch drivers may change memory accessors, so that we can support hosts with "weird" IO memory access requirments. For example, in "FSL eSDHC" SDHCI hardware all registers are 32 bit width, with big-endian addressing. That is, readb(0x2f) should turn into readb(0x2c), and readw(0x2c) should be translated to le16_to_cpu(readw(0x2e)). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24mmc_spi: adjust for delayed data token responseWolfgang Muees1-3/+24
Some cards are not able to send the data token in time, but miss the time frame for some bits(!). So synchronize to the start of the token. Signed-off-by: Wolfgang Muees <wolfgang.mues@auerswald.de> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24omap_hsmmc: Wait for SDBPAdrian Hunter1-5/+15
It is necessary to wait for bus power before sending any commands. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24omap_hsmmc: Fix MMC3 dmaGrazvydas Ignotas1-11/+25
Data transfers on third OMAP3 MMC controller don't work because DMA line numbers are only defined for MMC1 and MMC2. Fix that and store line numbers in mmc_omap_host structure to reduce code size. Tested on OMAP3 pandora board. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24omap_hsmmc: Disable SDBP at suspendJarkko Lavinen1-14/+2
Turn off the bus power at suspend. Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com> Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24omap_hsmmc: Do not prefix slot nameAdrian Hunter1-1/+1
Allow slot_name to be the same as the other OMAP driver, by removing the redundant "slot:" prefix. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24omap_hsmmc: Allow cover switch to cause rescanAdrian Hunter1-4/+7
Allow a cover switch to be used to cause a rescan of the MMC slot. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24omap_hsmmc: Add 8-bit bus width mode supportJarkko Lavinen1-1/+11
Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24omap_hsmmc: Implement scatter-gather emulationJuha Yrjola1-77/+95
Instead of using the bounce buffer, using scatter-gather emulation (as in the OMAP1/2 MMC driver) removes the need of one extra memory copy and improves performance. Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24omap_hsmmc: Fix response type for busy after responseAdrian Hunter1-9/+29
Some MMC commands result in the card becoming busy after the response is received. This needs to be specified for the omap_hsmmc host controller, which is what this patch does. However, the effect is that some commands with no data will cause a Transfer Complete (TC) interrupt in addition to the Command Complete (CC) interrupt. In order to deal with that, the irq handler has needed a few changes also. The benefit of this change is that the omap_hsmmc host controller driver now waits for the TC interrupt while the card is busy, so the mmc_block driver needs to poll the card status just once instead of repeatedly. i.e. the net result is more sleep and less cpu. The command sequence for open-ended multi-block write with DMA is now: Issue write command CMD25 Receive CC interrupt Data is sent Receive TC interrupt (DMA is done) Issue stop command CMD12 Receive CC interrupt Card is busy Receive TC interrupt Card is now ready for next transfer Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24omap_hsmmc: Do dma cleanup also with data CRC errorsJarkko Lavinen1-5/+5
Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24mmc: SDIO driver for Marvell SoCsMaen Suleiman4-0/+1087
This supports MMC/SD/SDIO currently found on the Kirkwood 88F6281 and 88F6192 SoC controllers. Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24MMC: tmio_mmc.h: fix build problemAlexander Beregalov1-0/+3
drivers/mmc/host/tmio_mmc.h: In function 'tmio_mmc_kmap_atomic': drivers/mmc/host/tmio_mmc.h:147: error: implicit declaration of function 'kmap_atomic' drivers/mmc/host/tmio_mmc.h:147: error: 'KM_BIO_SRC_IRQ' undeclared (first use in this function) drivers/mmc/host/tmio_mmc.h: In function 'tmio_mmc_kunmap_atomic': drivers/mmc/host/tmio_mmc.h:153: error: implicit declaration of function 'kunmap_atomic' drivers/mmc/host/tmio_mmc.h:153: error: 'KM_BIO_SRC_IRQ' undeclared (first use in this function) Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24tmio_mmc: Fix use after free in remove()Magnus Damm1-1/+1
Update the tmio_mmc code to call mmc_free_host() when done using the private data. Without this fix the driver frees memory and then keeps on using it as private data. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24tmio_mmc: Fix one off, use resource_size() in probe()Magnus Damm1-2/+2
Update the tmio_mmc code to use resource_size(). With this patch applied the correct resource size is passed to ioremap(). Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Ian Molton <ian@mnementh.co.uk> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24mmc_spi: allow higher timeouts for SPI modeWolfgang Muees1-0/+15
Some SD cards have very high timeouts in SPI mode. So adjust the timeouts from theory to practice. Signed-off-by: Wolfgang Muees <wolfgang.mues@auerswald.de> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24mmc_spi: wait more bytes for card responseWolfgang Muees1-1/+4
Some cards are slower than the standard allows and need more time to respond to a command. Max. observed number of bytes was 12. Signed-off-by: Wolfgang Muees <wolfgang.mues@auerswald.de> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24mmc_spi: allow setting of spi mode 3Wolfgang Muees1-3/+5
Allow the platform data structures to specify spi mode 3 (if there is a pullup on the clock line or the spi hardware is not able to serve spi mode 0). Signed-off-by: Wolfgang Muees <wolfgang.mues@auerswald.de> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24mmc: During unsafe resume, select the right volatge for the cardBalaji Rao1-0/+1
During mmc unsafe resume, choose the right voltage for the card after powerup. Although this has not seen to cause trouble, it's the wrong behaviour. Signed-off-by: Balaji Rao <balajirrao@openmoko.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24sdio: check that addresses are within the address spacePierre Ossman1-0/+8
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24sdio: handle null tuplesPierre Ossman1-0/+4
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24sdio: handle cis end marker in link fieldPierre Ossman1-0/+4
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24omap_hsmmc: Initialize hsmmc controller registers when resumingKim Kyuwon1-23/+32
Most registers lose its state when the processor wakes up from sleep state. Thus registers should be initialized, when the processor wakes up. However the current hsmmc 'resume' function doesn't consider this issue and finally makes deadlock. So this patch fixes this problem. Signed-off-by: Kim Kyuwon <chammoru@gmail.com> Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24omap_hsmmc: do not re-power when powering off MMCAdrian Hunter1-17/+0
Remove code that turns MMC1 power back on after it has been powered off (when the voltage is 1.8V). The offending code is not necessary because the host controller bus voltage is initialized to 3V when probing or resuming. Note that MMC powers up with the highest voltage available (see mmc_power_up()) which will be 3V also. Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24mmc: Add Extended CSD register to debugfsAdrian Hunter1-0/+67
Extended CSD is a MMC card register. As increasingly interesting fields are being added to Extended CSD, it is helpful to see its value. Note that SD cards do not have an Extended CSD register, so it is MMC only. Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24mmc: add MODALIAS linkage for MMC/SD devicesAndy Whitcroft2-0/+10
Currently we are using an explicit udev rule to trigger loading of the mmc-block module when an MMC or SD card is detected: SUBSYSTEM=="mmc", RUN+="/sbin/modprobe -Qba mmc-block" It makes much more sense for the mmc bus driver and the mmc-block module to share MODALIAS information so that they are linked automatically. There is no real information of use in the MMC system at the current time. All devices inserted require us to load the mmc-block device. Until such time as useful parameters exist simply reflect the module linkage via the module alias below: mmc:block Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24mmc: delayed_work was never cancelledJorg Schummer1-0/+2
The delayed work item mmc_host.detect is now cancelled before flushing the work queue. This takes care of cases when delayed_work was scheduled for mmc_host.detect, but not yet placed in the work queue. Signed-off-by: Jorg Schummer <ext-jorg.2.schummer@nokia.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-24mmc: struct device - replace bus_id with dev_name(), dev_set_name()Kay Sievers2-2/+2
Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-19Merge branch 'omap-clks3' into develRussell King2-17/+11
Conflicts: arch/arm/mach-omap2/clock.c
2009-03-14Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into develRussell King10-51/+98
Conflicts: arch/arm/mach-at91/gpio.c
2009-03-13MX2/MX3 SDHC driver: rename platform driverSascha Hauer1-1/+1
Rename driver from imx-mmc to mxc-mmc to avoid conflicts with the mx1 mmc driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13mxcmmc: Do not pass clock name, we have only one clock for this deviceSascha Hauer1-1/+1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13mmc: s3cmci: fix s3c2410_dma_config() arguments.Ben Dooks1-2/+1
The s3cmci driver is calling s3c2410_dma_config with incorrect data for the DCON register. The S3C2410_DCON_HWTRIG is implicit in the channel configuration and the device selection of S3C2410_DCON_CH0_SDI is incorrect as the DMA system may not select channel 0. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Acked-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-12[ARM] 5420/1: MMCI devinit and devexit macrosLinus Walleij1-3/+3
This adds __devinit and __devexit macros to the module probe and remove functions in MMCI. Now includes the __devexit_p() thing too. Signed-off-by: Linus Walleij <linus.walleij@ericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-03-09[ARM] pxa: move DMA registers definitions into <mach/dma.h>Eric Miao1-2/+1
1. Driver code where pxa_request_dma() is called will most likely reference DMA registers as well, and it is really unnecessary to include pxa-regs.h just for this. Move the definitions into <mach/dma.h> and make relevant drivers include it instead of <mach/pxa-regs.h>. 2. Introduce DMAC_REGS_VIRT as the virtual address base for these DMA registers. This allows later processors to re-use the same IP while registers may start at different I/O address. Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-03-08mmc: fix data timeout for SEND_EXT_CSDAdrian Hunter1-6/+9
Commit 0d3e0460f307e84904968aad6cff97bd688583d8 "MMC: CSD and CID timeout values" inadvertently broke the timeout for the MMC command SEND_EXT_CSD. This patch puts it back again. Depending on the characteristics of the controller, this bug may prevent the use of MMC cards. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-02sdhci: Add NO_BUSY_IRQ quirk for Marvell CAFE host chipAndres Salomon1-0/+1
As described here: http://lkml.org/lkml/2009/2/20/265 The CAFE chip is broken due to commit e809517f6fa5803a5a1cd5602. Anton added a quirk here: http://lkml.org/lkml/2009/2/20/279 that fixes CAFE's problem. This adds the quirk for CAFE. Signed-off-by: Andres Salomon <dilinger@debian.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-03-02sdhci: Add quirk for controllers with no end-of-busy IRQBen Dooks2-1/+6
The Samsung SDHCI (and FSL eSDHC) controller block seems to fail to generate an INT_DATA_END after the transfer has completed and the bus busy state finished. Changes in e809517f6fa5803a5a1cd56026f0e2190fc13d5c to use the new busy method are the cause of the behaviour change. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2009-02-19Merge branch 'for-linus' of ↵Linus Torvalds7-40/+77
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: omap_hsmmc: Change while(); loops with finite version omap_hsmmc: recover from transfer failures omap_hsmmc: only MMC1 allows HCTL.SDVS != 1.8V omap_hsmmc: card detect irq bugfix sdhci: fix led naming mmc_test: fix basic read test s3cmci: Fix hangup in do_pio_write() Revert "sdhci: force high speed capability on some controllers" MMC: fix bug - SDHC card capacity not correct
2009-02-19atmel-mci: fix initialization of dma slave dataDan Williams1-2/+3
The conversion of atmel-mci to dma_request_channel missed the initialization of the channel dma_slave information. The filter_fn passed to dma_request_channel is responsible for initializing the channel's private data. This implementation has the additional benefit of enabling a generic client-channel data passing mechanism. Reviewed-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-19omap_hsmmc: Change while(); loops with finite versionJean Pihet1-24/+30
Replace the infinite 'while() ;' loops with a finite loop version. Signed-off-by: Jean Pihet <jpihet@mvista.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 17:36:17 +0300