summaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)AuthorFilesLines
2024-05-02mmc: sdhci-of-dwcmshc: th1520: Increase tuning loop count to 128Maksim Kiselev1-0/+1
commit ace323f80b9bc6734289a4e8a77938a3ce964c7d upstream. Fix SD card tuning error by increasing tuning loop count from 40(MAX_TUNING_LOOP) to 128. For some reason the tuning algorithm requires to move through all the taps of delay line even if the THRESHOLD_MODE (bit 2 in AT_CTRL_R) is used instead of the LARGEST_WIN_MODE. Tested-by: Drew Fustini <drew@pdp7.com> Tested-by: Xi Ruoyao <xry111@xry111.site> Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: 43658a542ebf ("mmc: sdhci-of-dwcmshc: Add support for T-Head TH1520") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240402093539.184287-1-bigunclemax@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-02mmc: sdhci-msm: pervent access to suspended controllerMantas Pucka1-1/+15
commit f8def10f73a516b771051a2f70f2f0446902cb4f upstream. Generic sdhci code registers LED device and uses host->runtime_suspended flag to protect access to it. The sdhci-msm driver doesn't set this flag, which causes a crash when LED is accessed while controller is runtime suspended. Fix this by setting the flag correctly. Cc: stable@vger.kernel.org Fixes: 67e6db113c90 ("mmc: sdhci-msm: Add pm_runtime and system PM support") Signed-off-by: Mantas Pucka <mantas@8devices.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20240321-sdhci-mmc-suspend-v1-1-fbc555a64400@8devices.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-17mmc: omap: restore original power up/down stepsAaro Koskinen1-4/+19
[ Upstream commit 894ad61b85d6ba8efd4274aa8719d9ff1c89ea54 ] Commit e519f0bb64ef ("ARM/mmc: Convert old mmci-omap to GPIO descriptors") moved Nokia N810 MMC power up/down from the board file into the MMC driver. The change removed some delays, and ordering without a valid reason. Restore power up/down to match the original code. This matters only on N810 where the 2nd GPIO is in use. Other boards will see an additional delay but that should be a lesser concern than omitting delays altogether. Fixes: e519f0bb64ef ("ARM/mmc: Convert old mmci-omap to GPIO descriptors") Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Message-ID: <20240223181439.1099750-6-aaro.koskinen@iki.fi> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-17mmc: omap: fix deferred probeAaro Koskinen1-8/+8
[ Upstream commit f6862c7f156d04f81c38467e1c304b7e9517e810 ] After a deferred probe, GPIO descriptor lookup will fail with EBUSY. Fix by using managed descriptors. Fixes: e519f0bb64ef ("ARM/mmc: Convert old mmci-omap to GPIO descriptors") Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Message-ID: <20240223181439.1099750-5-aaro.koskinen@iki.fi> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-17mmc: omap: fix broken slot switch lookupAaro Koskinen1-7/+6
[ Upstream commit d4debbcbffa45c3de5df0040af2eea74a9e794a3 ] The lookup is done before host->dev is initialized. It will always just fail silently, and the MMC behaviour is totally unpredictable as the switch is left in an undefined state. Fix that. Fixes: e519f0bb64ef ("ARM/mmc: Convert old mmci-omap to GPIO descriptors") Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Message-ID: <20240223181439.1099750-4-aaro.koskinen@iki.fi> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-03sdhci-of-dwcmshc: disable PM runtime in dwcmshc_remove()Liming Sun1-11/+17
commit 03749309909935070253accab314288d332a204d upstream. This commit disables PM runtime in dwcmshc_remove() to avoid the error message below when reloading the sdhci-of-dwcmshc.ko sdhci-dwcmshc MLNXBF30:00: Unbalanced pm_runtime_enable! Fixes: 48fe8fadbe5e ("mmc: sdhci-of-dwcmshc: Add runtime PM operations") Reviewed-by: David Thompson <davthompson@nvidia.com> Signed-off-by: Liming Sun <limings@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/b9155963ffb12d18375002bf9ac9a3f98b727fc8.1710854108.git.limings@nvidia.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03mmc: core: Avoid negative index with array accessMikko Rapeli1-1/+1
commit cf55a7acd1ed38afe43bba1c8a0935b51d1dc014 upstream. Commit 4d0c8d0aef63 ("mmc: core: Use mrq.sbc in close-ended ffu") assigns prev_idata = idatas[i - 1], but doesn't check that the iterator i is greater than zero. Let's fix this by adding a check. Fixes: 4d0c8d0aef63 ("mmc: core: Use mrq.sbc in close-ended ffu") Link: https://lore.kernel.org/all/20231129092535.3278-1-avri.altman@wdc.com/ Cc: stable@vger.kernel.org Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org> Reviewed-by: Avri Altman <avri.altman@wdc.com> Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://lore.kernel.org/r/20240313133744.2405325-2-mikko.rapeli@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03mmc: core: Initialize mmc_blk_ioc_dataMikko Rapeli1-1/+1
commit 0cdfe5b0bf295c0dee97436a8ed13336933a0211 upstream. Commit 4d0c8d0aef63 ("mmc: core: Use mrq.sbc in close-ended ffu") adds flags uint to struct mmc_blk_ioc_data, but it does not get initialized for RPMB ioctls which now fails. Let's fix this by always initializing the struct and flags to zero. Fixes: 4d0c8d0aef63 ("mmc: core: Use mrq.sbc in close-ended ffu") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218587 Link: https://lore.kernel.org/all/20231129092535.3278-1-avri.altman@wdc.com/ Cc: stable@vger.kernel.org Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org> Reviewed-by: Avri Altman <avri.altman@wdc.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> Link: https://lore.kernel.org/r/20240313133744.2405325-1-mikko.rapeli@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03mmc: sdhci-omap: re-tuning is needed after a pm transition to support emmc ↵Romain Naour1-0/+3
HS200 mode commit f9e2a5b00a35f2c064dc679808bc8db5cc779ed6 upstream. "PM runtime functions" was been added in sdhci-omap driver in commit f433e8aac6b9 ("mmc: sdhci-omap: Implement PM runtime functions") along with "card power off and enable aggressive PM" in commit 3edf588e7fe0 ("mmc: sdhci-omap: Allow SDIO card power off and enable aggressive PM"). Since then, the sdhci-omap driver doesn't work using mmc-hs200 mode due to the tuning values being lost during a pm transition. As for the sdhci_am654 driver, request a new tuning sequence before suspend (sdhci_omap_runtime_suspend()), otherwise the device will trigger cache flush error: mmc1: cache flush error -110 (ETIMEDOUT) mmc1: error -110 doing aggressive suspend followed by I/O errors produced by fdisk -l /dev/mmcblk1boot1: I/O error, dev mmcblk1boot0, sector 64384 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 I/O error, dev mmcblk1boot1, sector 64384 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 I/O error, dev mmcblk1boot1, sector 64384 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Buffer I/O error on dev mmcblk1boot1, logical block 8048, async page read I/O error, dev mmcblk1boot0, sector 64384 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 Buffer I/O error on dev mmcblk1boot0, logical block 8048, async page read Don't re-tune if auto retuning is supported in HW (when SDHCI_TUNING_MODE_3 is available). Link: https://lore.kernel.org/all/2e5f1997-564c-44e4-b357-6343e0dae7ab@smile.fr Fixes: f433e8aac6b9 ("mmc: sdhci-omap: Implement PM runtime functions") Signed-off-by: Romain Naour <romain.naour@skf.com> Reviewed-by: Tony Lindgren <tony@atomide.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240315234444.816978-1-romain.naour@smile.fr Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03mmc: core: Fix switch on gp3 partitionDominique Martinet1-4/+6
[ Upstream commit 4af59a8df5ea930038cd3355e822f5eedf4accc1 ] Commit e7794c14fd73 ("mmc: rpmb: fixes pause retune on all RPMB partitions.") added a mask check for 'part_type', but the mask used was wrong leading to the code intended for rpmb also being executed for GP3. On some MMCs (but not all) this would make gp3 partition inaccessible: armadillo:~# head -c 1 < /dev/mmcblk2gp3 head: standard input: I/O error armadillo:~# dmesg -c [ 422.976583] mmc2: running CQE recovery [ 423.058182] mmc2: running CQE recovery [ 423.137607] mmc2: running CQE recovery [ 423.137802] blk_update_request: I/O error, dev mmcblk2gp3, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 4 prio class 0 [ 423.237125] mmc2: running CQE recovery [ 423.318206] mmc2: running CQE recovery [ 423.397680] mmc2: running CQE recovery [ 423.397837] blk_update_request: I/O error, dev mmcblk2gp3, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 0 [ 423.408287] Buffer I/O error on dev mmcblk2gp3, logical block 0, async page read the part_type values of interest here are defined as follow: main 0 boot0 1 boot1 2 rpmb 3 gp0 4 gp1 5 gp2 6 gp3 7 so mask with EXT_CSD_PART_CONFIG_ACC_MASK (7) to correctly identify rpmb Fixes: e7794c14fd73 ("mmc: rpmb: fixes pause retune on all RPMB partitions.") Cc: stable@vger.kernel.org Cc: Jorge Ramirez-Ortiz <jorge@foundries.io> Signed-off-by: Dominique Martinet <dominique.martinet@atmark-techno.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20240306-mmc-partswitch-v1-1-bf116985d950@codewreck.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-03mmc: tmio: avoid concurrent runs of mmc_request_done()Wolfram Sang1-0/+2
[ Upstream commit e8d1b41e69d72c62865bebe8f441163ec00b3d44 ] With the to-be-fixed commit, the reset_work handler cleared 'host->mrq' outside of the spinlock protected critical section. That leaves a small race window during execution of 'tmio_mmc_reset()' where the done_work handler could grab a pointer to the now invalid 'host->mrq'. Both would use it to call mmc_request_done() causing problems (see link below). However, 'host->mrq' cannot simply be cleared earlier inside the critical section. That would allow new mrqs to come in asynchronously while the actual reset of the controller still needs to be done. So, like 'tmio_mmc_set_ios()', an ERR_PTR is used to prevent new mrqs from coming in but still avoiding concurrency between work handlers. Reported-by: Dirk Behme <dirk.behme@de.bosch.com> Closes: https://lore.kernel.org/all/20240220061356.3001761-1-dirk.behme@de.bosch.com/ Fixes: df3ef2d3c92c ("mmc: protect the tmio_mmc driver against a theoretical race") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Dirk Behme <dirk.behme@de.bosch.com> Reviewed-by: Dirk Behme <dirk.behme@de.bosch.com> Cc: stable@vger.kernel.org # 3.0+ Link: https://lore.kernel.org/r/20240305104423.3177-2-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-27mmc: wmt-sdmmc: remove an incorrect release_mem_region() call in the .remove ↵Christophe JAILLET1-4/+0
function [ Upstream commit ae5004a40a262d329039b99b62bd3fe7645b66ad ] This looks strange to call release_mem_region() in a remove function without any request_mem_region() in the probe or "struct resource" somewhere. So remove the corresponding code. Fixes: 3a96dff0f828 ("mmc: SD/MMC Host Controller for Wondermedia WM8505/WM8650") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/bb0bb1ed1e18de55e8c0547625bde271e64b8c31.1708983064.git.christophe.jaillet@wanadoo.fr Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-28mmc: sdhci-xenon: add timeout for PHY init completeElad Nachman1-9/+20
AC5X spec says PHY init complete bit must be polled until zero. We see cases in which timeout can take longer than the standard calculation on AC5X, which is expected following the spec comment above. According to the spec, we must wait as long as it takes for that bit to toggle on AC5X. Cap that with 100 delay loops so we won't get stuck forever. Fixes: 06c8b667ff5b ("mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC") Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Elad Nachman <enachman@marvell.com> Link: https://lore.kernel.org/r/20240222191714.1216470-3-enachman@marvell.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-02-28mmc: sdhci-xenon: fix PHY init clock stabilityElad Nachman1-0/+19
Each time SD/mmc phy is initialized, at times, in some of the attempts, phy fails to completes its initialization which results into timeout error. Per the HW spec, it is a pre-requisite to ensure a stable SD clock before a phy initialization is attempted. Fixes: 06c8b667ff5b ("mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC") Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Elad Nachman <enachman@marvell.com> Link: https://lore.kernel.org/r/20240222200930.1277665-1-enachman@marvell.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-02-14mmc: mmci: stm32: fix DMA API overlapping mappings warningChristophe Kerello1-0/+24
Turning on CONFIG_DMA_API_DEBUG_SG results in the following warning: DMA-API: mmci-pl18x 48220000.mmc: cacheline tracking EEXIST, overlapping mappings aren't supported WARNING: CPU: 1 PID: 51 at kernel/dma/debug.c:568 add_dma_entry+0x234/0x2f4 Modules linked in: CPU: 1 PID: 51 Comm: kworker/1:2 Not tainted 6.1.28 #1 Hardware name: STMicroelectronics STM32MP257F-EV1 Evaluation Board (DT) Workqueue: events_freezable mmc_rescan Call trace: add_dma_entry+0x234/0x2f4 debug_dma_map_sg+0x198/0x350 __dma_map_sg_attrs+0xa0/0x110 dma_map_sg_attrs+0x10/0x2c sdmmc_idma_prep_data+0x80/0xc0 mmci_prep_data+0x38/0x84 mmci_start_data+0x108/0x2dc mmci_request+0xe4/0x190 __mmc_start_request+0x68/0x140 mmc_start_request+0x94/0xc0 mmc_wait_for_req+0x70/0x100 mmc_send_tuning+0x108/0x1ac sdmmc_execute_tuning+0x14c/0x210 mmc_execute_tuning+0x48/0xec mmc_sd_init_uhs_card.part.0+0x208/0x464 mmc_sd_init_card+0x318/0x89c mmc_attach_sd+0xe4/0x180 mmc_rescan+0x244/0x320 DMA API debug brings to light leaking dma-mappings as dma_map_sg and dma_unmap_sg are not correctly balanced. If an error occurs in mmci_cmd_irq function, only mmci_dma_error function is called and as this API is not managed on stm32 variant, dma_unmap_sg is never called in this error path. Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com> Fixes: 46b723dd867d ("mmc: mmci: add stm32 sdmmc variant") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240207143951.938144-1-christophe.kerello@foss.st.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-02-14mmc: core: Fix eMMC initialization with 1-bit bus connectionIvan Semenov1-0/+2
Initializing an eMMC that's connected via a 1-bit bus is current failing, if the HW (DT) informs that 4-bit bus is supported. In fact this is a regression, as we were earlier capable of falling back to 1-bit mode, when switching to 4/8-bit bus failed. Therefore, let's restore the behaviour. Log for Samsung eMMC 5.1 chip connected via 1bit bus (only D0 pin) Before patch: [134509.044225] mmc0: switch to bus width 4 failed [134509.044509] mmc0: new high speed MMC card at address 0001 [134509.054594] mmcblk0: mmc0:0001 BGUF4R 29.1 GiB [134509.281602] mmc0: switch to bus width 4 failed [134509.282638] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [134509.282657] Buffer I/O error on dev mmcblk0, logical block 0, async page read [134509.284598] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [134509.284602] Buffer I/O error on dev mmcblk0, logical block 0, async page read [134509.284609] ldm_validate_partition_table(): Disk read failed. [134509.286495] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [134509.286500] Buffer I/O error on dev mmcblk0, logical block 0, async page read [134509.288303] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [134509.288308] Buffer I/O error on dev mmcblk0, logical block 0, async page read [134509.289540] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [134509.289544] Buffer I/O error on dev mmcblk0, logical block 0, async page read [134509.289553] mmcblk0: unable to read partition table [134509.289728] mmcblk0boot0: mmc0:0001 BGUF4R 31.9 MiB [134509.290283] mmcblk0boot1: mmc0:0001 BGUF4R 31.9 MiB [134509.294577] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 [134509.295835] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2 [134509.295841] Buffer I/O error on dev mmcblk0, logical block 0, async page read After patch: [134551.089613] mmc0: switch to bus width 4 failed [134551.090377] mmc0: new high speed MMC card at address 0001 [134551.102271] mmcblk0: mmc0:0001 BGUF4R 29.1 GiB [134551.113365] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 [134551.114262] mmcblk0boot0: mmc0:0001 BGUF4R 31.9 MiB [134551.114925] mmcblk0boot1: mmc0:0001 BGUF4R 31.9 MiB Fixes: 577fb13199b1 ("mmc: rework selection of bus speed mode") Cc: stable@vger.kernel.org Signed-off-by: Ivan Semenov <ivan@semenov.dev> Link: https://lore.kernel.org/r/20240206172845.34316-1-ivan@semenov.dev Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-02-06mmc: slot-gpio: Allow non-sleeping GPIO roAlexander Stein1-1/+5
This change uses the appropriate _cansleep or non-sleeping API for reading GPIO read-only state. This allows users with GPIOs that never sleepbeing called in atomic context. Implement the same mechanism as in commit 52af318c93e97 ("mmc: Allow non-sleeping GPIO cd"). Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240206083912.2543142-1-alexander.stein@ew.tq-group.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-02-06mmc: sdhci-pci-o2micro: Fix a warm reboot issue that disk can't be detected ↵Fred Ai1-0/+30
by BIOS Driver shall switch clock source from DLL clock to OPE clock when power off card to ensure that card can be identified with OPE clock by BIOS. Signed-off-by: Fred Ai <fred.ai@bayhubtech.com> Fixes:4be33cf18703 ("mmc: sdhci-pci-o2micro: Improve card input timing at SDR104/HS200 mode") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240203102908.4683-1-fredaibayhubtech@126.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-01-18Merge tag 'tty-6.8-rc1' of ↵Linus Torvalds1-13/+9
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial updates from Greg KH: "Here is the big set of tty and serial driver changes for 6.8-rc1. As usual, Jiri has a bunch of refactoring and cleanups for the tty core and drivers in here, along with the usual set of rs485 updates (someday this might work properly...) Along with those, in here are changes for: - sc16is7xx serial driver updates - platform driver removal api updates - amba-pl011 driver updates - tty driver binding updates - other small tty/serial driver updates and changes All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (197 commits) serial: sc16is7xx: refactor EFR lock serial: sc16is7xx: reorder code to remove prototype declarations serial: sc16is7xx: refactor FIFO access functions to increase commonality serial: sc16is7xx: drop unneeded MODULE_ALIAS serial: sc16is7xx: replace hardcoded divisor value with BIT() macro serial: sc16is7xx: add explicit return for some switch default cases serial: sc16is7xx: add macro for max number of UART ports serial: sc16is7xx: add driver name to struct uart_driver serial: sc16is7xx: use i2c_get_match_data() serial: sc16is7xx: use spi_get_device_match_data() serial: sc16is7xx: use DECLARE_BITMAP for sc16is7xx_lines bitfield serial: sc16is7xx: improve do/while loop in sc16is7xx_irq() serial: sc16is7xx: remove obsolete loop in sc16is7xx_port_irq() serial: sc16is7xx: set safe default SPI clock frequency serial: sc16is7xx: add check for unsupported SPI modes during probe serial: sc16is7xx: fix invalid sc16is7xx_lines bitfield in case of probe error serial: 8250_exar: Set missing rs485_supported flag serial: omap: do not override settings for RS485 support serial: core, imx: do not set RS485 enabled if it is not supported serial: core: make sure RS485 cannot be enabled when it is not supported ...
2024-01-18Merge tag 'char-misc-6.8-rc1' of ↵Linus Torvalds1-1/+16
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other driver subsystem changes for 6.8-rc1. Other than lots of binder driver changes (as you can see by the merge conflicts) included in here are: - lots of iio driver updates and additions - spmi driver updates - eeprom driver updates - firmware driver updates - ocxl driver updates - mhi driver updates - w1 driver updates - nvmem driver updates - coresight driver updates - platform driver remove callback api changes - tags.sh script updates - bus_type constant marking cleanups - lots of other small driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (341 commits) android: removed duplicate linux/errno uio: Fix use-after-free in uio_open drivers: soc: xilinx: add check for platform firmware: xilinx: Export function to use in other module scripts/tags.sh: remove find_sources scripts/tags.sh: use -n to test archinclude scripts/tags.sh: add local annotation scripts/tags.sh: use more portable -path instead of -wholename scripts/tags.sh: Update comment (addition of gtags) firmware: zynqmp: Convert to platform remove callback returning void firmware: turris-mox-rwtm: Convert to platform remove callback returning void firmware: stratix10-svc: Convert to platform remove callback returning void firmware: stratix10-rsu: Convert to platform remove callback returning void firmware: raspberrypi: Convert to platform remove callback returning void firmware: qemu_fw_cfg: Convert to platform remove callback returning void firmware: mtk-adsp-ipc: Convert to platform remove callback returning void firmware: imx-dsp: Convert to platform remove callback returning void firmware: coreboot_table: Convert to platform remove callback returning void firmware: arm_scpi: Convert to platform remove callback returning void firmware: arm_scmi: Convert to platform remove callback returning void ...
2024-01-13Merge tag 'mmc-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds17-296/+744
Pull MMC updates from Ulf Hansson: "MMC core: - Don't force a retune before eMMC RPMB switch - Add optional HS400 tuning in HS400es initialization - Add a sysfs node to for write-protect-group-size - Add re-tuning test to the mmc-test module - Use mrq.sbc to support close-ended ioctl requests MMC host: - mmci: Add support for SDIO in-band irqs for the stm32 variant - mmc_spi: Remove broken support custom DMA mapped buffers - mtk-sd: Improve and extend the support for tunings - renesas_sdhi: Document support for the RZ/Five variant - sdhci_am654: Drop support for the ti,otap-del-sel DT property - sdhci-brcmstb: Add support for the brcm 74165b0 variant - sdhci-msm: Add compatibles for IPQ4019 and IPQ8074 - sdhci-of-dwcmshc: Add support for the T-Head TH1520 variant - sdhci-xenon: Add support for the Marvell ac5 variant" * tag 'mmc-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (27 commits) mmc: xenon: Add ac5 support via bounce buffer dt-bindings: mmc: add Marvell ac5 mmc: sdhci-brcmstb: add new sdhci reset sequence for brcm 74165b0 dt-bindings: mmc: brcm,sdhci-brcmstb: Add support for 74165b0 mmc: core: Do not force a retune before RPMB switch mmc: core: Add HS400 tuning in HS400es initialization mmc: sdhci_omap: Fix TI SoC dependencies mmc: sdhci_am654: Fix TI SoC dependencies mmc: core: Add wp_grp_size sysfs node mmc: mmc_test: Add re-tuning test mmc: mmc_spi: remove custom DMA mapped buffers dt-bindings: mmc: sdhci-msm: document dedicated IPQ4019 and IPQ8074 dt-bindings: mmc: synopsys-dw-mshc: add iommus for Intel SocFPGA mmc: mtk-sd: Extend number of tuning steps dt-bindings: mmc: mtk-sd: add tuning steps related property mmc: sdhci-omap: don't misuse kernel-doc marker mmc: mtk-sd: Increase the verbosity of msdc_track_cmd_data mmc: core: Use mrq.sbc in close-ended ffu mmc: sdhci_am654: Drop lookup for deprecated ti,otap-del-sel mmc: sdhci-of-dwcmshc: Use logical OR instead of bitwise OR in dwcmshc_probe() ...
2024-01-10Merge tag 'spi-v6.8' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "A moderately busy release for SPI, the main core update was the merging of support for multiple chip selects, used in some flash configurations. There were also big overhauls for the AXI SPI Engine and PL022 drivers, plus some new device support for ST. There's a few patches for other trees, API updates to allow the multiple chip select support and one of the naming modernisations touched a controller embedded in the USB code. - Support for multiple chip selects. - A big overhaul for the AXI SPI engine driver, modernising it and adding a bunch of new features. - Modernisation of the PL022 driver, fixing some issues with submitting messages while in atomic context in the process. - Many drivers were converted to use new APIs which avoid outdated terminology for devices and controllers. - Support for ST Microelectronics STM32F7 and STM32MP25, and Renesas RZ/Five" * tag 'spi-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (83 commits) spi: stm32: add st,stm32mp25-spi compatible supporting STM32MP25 soc dt-bindings: spi: stm32: add st,stm32mp25-spi compatible spi: stm32: use dma_get_slave_caps prior to configuring dma channel spi: axi-spi-engine: fix struct member doc warnings spi: pl022: update description of internal_cs_control() spi: pl022: delete description of cur_msg spi: dw: Remove Intel Thunder Bay SOC support spi: dw: Remove Intel Thunder Bay SOC support spi: sh-msiof: Enforce fixed DTDL for R-Car H3 spi: ljca: switch to use devm_spi_alloc_host() spi: cs42l43: switch to use devm_spi_alloc_host() spi: zynqmp-gqspi: switch to use modern name spi: zynq-qspi: switch to use modern name spi: xtensa-xtfpga: switch to use modern name spi: xlp: switch to use modern name spi: xilinx: switch to use modern name spi: xcomm: switch to use modern name spi: uniphier: switch to use modern name spi: topcliff-pch: switch to use modern name spi: wpcm-fiu: switch to use devm_spi_alloc_host() ...
2024-01-05mmc: xenon: Add ac5 support via bounce bufferElad Nachman2-1/+33
AC5/X/IM SOCs has a variant of the Xenon eMMC controller, in which only 31-bit of addressing pass from the controller on the AXI bus. Since we cannot guarantee that only buffers from the first 2GB of memory will reach the driver, the driver is configured for SDMA mode, without 64-bit mode, overriding the DMA mask to 34-bit to support the DDR memory mapping, which starts at offset 8GB. Signed-off-by: Elad Nachman <enachman@marvell.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20240104173033.2836110-1-enachman@marvell.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-01-05mmc: sdhci-brcmstb: add new sdhci reset sequence for brcm 74165b0Kamal Dasu1-5/+64
74165b0 shall use a new sdio controller core version which requires a different reset sequence. For core reset we use sdhci_reset. For CMD and/or DATA reset added a new function to also enable SDHCI clocks SDHCI_CLOCK_CARD_EN SDHCI_CLOCK_INT_EN along with the SDHCI_RESET_CMD and/or SDHCI_RESET_DATA fields. Signed-off-by: Kamal Dasu <kdasu@broadcom.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20240103222338.31447-3-kamal.dasu@broadcom.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-01-03mmc: Merge branch fixes into nextUlf Hansson1-3/+7
Merge the mmc fixes for v6.7-rc[n] into the next branch, to allow them to get tested together with the new mmc changes that are targeted for v6.8. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-01-03mmc: core: Do not force a retune before RPMB switchJorge Ramirez-Ortiz1-2/+1
Requesting a retune before switching to the RPMB partition has been observed to cause CRC errors on the RPMB reads (-EILSEQ). Since RPMB reads can not be retried, the clients would be directly affected by the errors. This commit disables the retune request prior to switching to the RPMB partition: mmc_retune_pause() no longer triggers a retune before the pause period begins. This was verified with the sdhci-of-arasan driver (ZynqMP) configured for HS200 using two separate eMMC cards (DG4064 and 064GB2). In both cases, the error was easy to reproduce triggering every few tenths of reads. With this commit, systems that were utilizing OP-TEE to access RPMB variables will experience an enhanced performance. Specifically, when OP-TEE is configured to employ RPMB as a secure storage solution, it not only writes the data but also the secure filesystem within the partition. As a result, retrieving any variable involves multiple RPMB reads, typically around five. For context, on ZynqMP, each retune request consumed approximately 8ms. Consequently, reading any RPMB variable used to take at the very minimum 40ms. After droping the need to retune before switching to the RPMB partition, this is no longer the case. Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Acked-by: Avri Altman <avri.altman@wdc.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20240103112911.2954632-1-jorge@foundries.io Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-01-03mmc: sdhci-sprd: Fix eMMC init failure after hw resetWenchao Chen1-3/+7
Some eMMC devices that do not close the auto clk gate after hw reset will cause eMMC initialization to fail. Let's fix this. Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com> Fixes: ff874dbc4f86 ("mmc: sdhci-sprd: Disable CLK_AUTO when the clock is less than 400K") Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231204064934.21236-1-wenchao.chen@unisoc.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-01-02mmc: core: Add HS400 tuning in HS400es initializationMengqi Zhang1-2/+7
During the initialization to HS400es stage, add a HS400 tuning flow as an optional process. For Mediatek IP, the HS400es mode requires a specific tuning to ensure the correct HS400 timing setting. Signed-off-by: Mengqi Zhang <mengqi.zhang@mediatek.com> Link: https://lore.kernel.org/r/20231225093839.22931-2-mengqi.zhang@mediatek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-01-02mmc: sdhci_omap: Fix TI SoC dependenciesPeter Robinson1-2/+3
The sdhci_omap is specific to older TI SoCs, update the dependencies for those SoCs and compile testing. While we're at it update the text to reflect the wider range of supported TI SoCS the driver now supports. Fixes: 7d326930d352 ("mmc: sdhci-omap: Add OMAP SDHCI driver") Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Link: https://lore.kernel.org/r/20231220135950.433588-2-pbrobinson@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-01-02mmc: sdhci_am654: Fix TI SoC dependenciesPeter Robinson1-2/+3
The sdhci_am654 is specific to recent TI SoCs, update the dependencies for those SoCs and compile testing. While we're at it update the text to reflect the wider range of supported TI SoCS the driver now supports. Fixes: 41fd4caeb00b ("mmc: sdhci_am654: Add Initial Support for AM654 SDHCI driver") Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Link: https://lore.kernel.org/r/20231220135950.433588-1-pbrobinson@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-01-02mmc: core: Add wp_grp_size sysfs nodeLin Gui1-1/+15
The eMMC card can be set into write-protected mode to prevent data from being accidentally modified or deleted. Wp_grp_size (Write Protect Group Size) refers to an attribute of the eMMC card, used to manage write protection and is the CSD register [36:32] of the eMMC device. Wp_grp_size (Write Protect Group Size) indicates how many eMMC blocks are contained in each write protection group on the eMMC card. To allow userspace easy access of the CSD register bits, let's add sysfs node "wp_grp_size". Signed-off-by: Lin Gui <lin.gui@mediatek.com> Signed-off-by: Bo Ye <bo.ye@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20231218230532.82427-1-bo.ye@mediatek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-01-02mmc: mmc_test: Add re-tuning testAdrian Hunter1-6/+27
Add a test to repeatedly re-tune in between random reads. The test is non-destructive of data on the card and runs for 30 seconds. It can be repeated to test for longer durations. If re-tuning is not supported, the test is skipped. Example: # echo 'mmc1:0001' > /sys/bus/mmc/drivers/mmcblk/unbind # echo 'mmc1:0001' > /sys/bus/mmc/drivers/mmc_test/bind [ 36.642257] mmc_test mmc1:0001: Card claimed for testing. # cat /sys/kernel/debug/mmc1/mmc1\:0001/testlist | grep tuning 52: Re-tuning reliability # echo 52 > /sys/kernel/debug/mmc1/mmc1\:0001/test [ 91.522555] mmc1: Starting tests of card mmc1:0001... [ 91.528425] mmc1: Test case 52. Re-tuning reliability... [ 121.536682] mmc1: Result: OK [ 121.539572] mmc1: Tests completed. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20231214090902.43628-1-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-01-02mmc: mmc_spi: remove custom DMA mapped buffersAndy Shevchenko1-181/+5
There is no need to duplicate what SPI core or individual controller drivers already do, i.e. mapping the buffers for DMA capable transfers. Note, that the code, besides its redundancy, was buggy: strictly speaking there is no guarantee, while it's true for those which can use this code (see below), that the SPI host controller _is_ the device which does DMA. Also see the Link tags below. Additional notes. Currently only two SPI host controller drivers may use premapped (by the user) DMA buffers: - drivers/spi/spi-au1550.c - drivers/spi/spi-fsl-spi.c Both of them have DMA mapping support code. I don't expect that SPI host controller code is worse than what has been done in mmc_spi. Hence I do not expect any regressions here. Otherwise, I'm pretty much sure these regressions have to be fixed in the respective drivers, and not here. That said, remove all related pieces of DMA mapping code from mmc_spi. Link: https://lore.kernel.org/linux-mmc/c73b9ba9-1699-2aff-e2fd-b4b4f292a3ca@raspberrypi.org/ Link: https://stackoverflow.com/questions/67620728/mmc-spi-issue-not-able-to-setup-mmc-sd-card-in-linux Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231207221901.3259962-1-andriy.shevchenko@linux.intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-12-15mmc: rtsx: add rts5264 to support sd express cardRicky Wu1-1/+16
rts5264 can support sd express card, so add the id in sd express card init to do rts5264 register setting when the sd express card insert Signed-off-by: Ricky Wu <ricky_wu@realtek.com> Link: https://lore.kernel.org/r/20231208032145.2143580-4-ricky_wu@realtek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-11Merge 6.7-rc5 into tty-nextGreg Kroah-Hartman5-49/+85
We need the serial fixes in here as well to build off of. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08tty: mmc: sdio: use u8 for flagJiri Slaby (SUSE)1-2/+1
Switch character types to u8. To conform to characters in the rest of the tty layer. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: linux-mmc@vger.kernel.org Link: https://lore.kernel.org/r/20231206073712.17776-17-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08tty: make tty_operations::send_xchar accept u8 charJiri Slaby (SUSE)1-1/+1
tty_operations::send_xchar is one of the last users of 'char' type for characters in the tty layer. Convert it to u8 now. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Cc: netdev@vger.kernel.org Cc: linux-mmc@vger.kernel.org Cc: linux-bluetooth@vger.kernel.org Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20231206073712.17776-5-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-08tty: mmc: sdio_uart: switch sdio_in() to return u8Jiri Slaby (SUSE)1-11/+8
sdio_in() returns a value returned from sdio_readb(). The latter returns u8. So should the former. Therefore, switch sdio_in() return type to u8 and all its callers too. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: linux-mmc@vger.kernel.org Link: https://lore.kernel.org/r/20231206073712.17776-3-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-07mmc: Merge branch fixes into nextUlf Hansson1-0/+1
Merge the mmc fixes for v6.7-rc[n] into the next branch, to allow them to get tested together with the new mmc changes that are targeted for v6.8. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-12-07mmc: core: Cancel delayed work before releasing hostGeert Uytterhoeven1-0/+1
On RZ/Five SMARC EVK, where probing of SDHI is deferred due to probe deferral of the vqmmc-supply regulator: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 0 at kernel/time/timer.c:1738 __run_timers.part.0+0x1d0/0x1e8 Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 6.7.0-rc4 #101 Hardware name: Renesas SMARC EVK based on r9a07g043f01 (DT) epc : __run_timers.part.0+0x1d0/0x1e8 ra : __run_timers.part.0+0x134/0x1e8 epc : ffffffff800771a4 ra : ffffffff80077108 sp : ffffffc800003e60 gp : ffffffff814f5028 tp : ffffffff8140c5c0 t0 : ffffffc800000000 t1 : 0000000000000001 t2 : ffffffff81201300 s0 : ffffffc800003f20 s1 : ffffffd8023bc4a0 a0 : 00000000fffee6b0 a1 : 0004010000400000 a2 : ffffffffc0000016 a3 : ffffffff81488640 a4 : ffffffc800003e60 a5 : 0000000000000000 a6 : 0000000004000000 a7 : ffffffc800003e68 s2 : 0000000000000122 s3 : 0000000000200000 s4 : 0000000000000000 s5 : ffffffffffffffff s6 : ffffffff81488678 s7 : ffffffff814886c0 s8 : ffffffff814f49c0 s9 : ffffffff81488640 s10: 0000000000000000 s11: ffffffc800003e60 t3 : 0000000000000240 t4 : 0000000000000a52 t5 : ffffffd8024ae018 t6 : ffffffd8024ae038 status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003 [<ffffffff800771a4>] __run_timers.part.0+0x1d0/0x1e8 [<ffffffff800771e0>] run_timer_softirq+0x24/0x4a [<ffffffff80809092>] __do_softirq+0xc6/0x1fa [<ffffffff80028e4c>] irq_exit_rcu+0x66/0x84 [<ffffffff80800f7a>] handle_riscv_irq+0x40/0x4e [<ffffffff80808f48>] call_on_irq_stack+0x1c/0x28 ---[ end trace 0000000000000000 ]--- What happens? renesas_sdhi_probe() { tmio_mmc_host_alloc() mmc_alloc_host() INIT_DELAYED_WORK(&host->detect, mmc_rescan); devm_request_irq(tmio_mmc_irq); /* * After this, the interrupt handler may be invoked at any time * * tmio_mmc_irq() * { * __tmio_mmc_card_detect_irq() * mmc_detect_change() * _mmc_detect_change() * mmc_schedule_delayed_work(&host->detect, delay); * } */ tmio_mmc_host_probe() tmio_mmc_init_ocr() -EPROBE_DEFER tmio_mmc_host_free() mmc_free_host() } When expire_timers() runs later, it warns because the MMC host structure containing the delayed work was freed, and now contains an invalid work function pointer. Fix this by cancelling any pending delayed work before releasing the MMC host structure. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/205dc4c91b47e31b64392fe2498c7a449e717b4b.1701689330.git.geert+renesas@glider.be Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-12-07mmc: mtk-sd: Extend number of tuning stepsAxe Yang1-48/+110
Previously, during the MSDC calibration process, a full clock cycle actually not be covered, which in some cases didn't yield the best results and could cause CRC errors. This problem is particularly evident when MSDC is used as an SDIO host. In fact, MSDC support tuning up to a maximum of 64 steps, but by default, the step number is 32. By increase the tuning step, we are more likely to cover more parts of a clock cycle, and get better calibration result. To illustrate, when tuning 32 steps, if the obtained window has a hole near the middle, like this: 0xffc07ff (hex), then the selected delay will be the 6 (counting from right to left). (32 <- 1) 1111 1111 1100 0000 0000 0111 11(1)1 1111 However, if we tune 64 steps, the window obtained may look like this: 0xfffffffffffc07ff. The final selected delay will be 44, which is safer as it is further away from the hole: (64 <- 1) 1111 ... (1)111 1111 1111 1111 1111 1100 0000 0000 0111 1111 1111 In this case, delay 6 selected through 32 steps tuning is obviously not optimal, and this delay is closer to the hole, using it would easily cause CRC problems. As per mesaurements taken on mediatek SoC platform, the tuning phase will take: eMMC - 32 steps: ~3ms - 64 steps: ~6ms SDIO - 32 steps: ~4ms - 64 steos: ~7ms Tuning more steps won't prolong boot times by any meaningful amount of time, so for SD/SDIO the default tuning steps will be adjust to 64. But for eMMC, it is still preferred to use 32 steps tuning as otherwise there would be performance lose when accessing the RPMB partition(requiring retuning each time). You can configure property "mediatek,tuning-step" in MSDC dts node to adjust the step number. Signed-off-by: Axe Yang <axe.yang@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20231207063535.29546-3-axe.yang@mediatek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-12-07mmc: sdhci-omap: don't misuse kernel-doc markerRandy Dunlap1-1/+1
Use "/*" instead of "/**" for common C comments to prevent warnings from scripts/kernel-doc. sdhci-omap.c:3: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst sdhci-omap.c:3: warning: missing initial short description on line: * SDHCI Controller driver for TI's OMAP SoCs Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/oe-kbuild-all/202311201117.lFxgJTK6-lkp@intel.com/ Link: https://lore.kernel.org/r/20231206055855.21092-1-rdunlap@infradead.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-12-07mmc: Merge branch fixes into nextUlf Hansson2-24/+9
Merge the mmc fixes for v6.7-rc[n] into the next branch, to allow them to get tested together with the new mmc changes that are targeted for v6.8. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-12-07mmc: rpmb: fixes pause retune on all RPMB partitions.Jorge Ramirez-Ortiz1-3/+4
When RPMB was converted to a character device, it added support for multiple RPMB partitions (Commit 97548575bef3 ("mmc: block: Convert RPMB to a character device"). One of the changes in this commit was transforming the variable target_part defined in __mmc_blk_ioctl_cmd into a bitmask. This inadvertently regressed the validation check done in mmc_blk_part_switch_pre() and mmc_blk_part_switch_post(), so let's fix it. Fixes: 97548575bef3 ("mmc: block: Convert RPMB to a character device") Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20231201153143.1449753-1-jorge@foundries.io Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-12-07mmc: mtk-sd: Increase the verbosity of msdc_track_cmd_dataPin-yen Lin1-3/+5
This log message is necessary for debugging, so enable it by default to debug issues that are hard to reproduce locally. Signed-off-by: Pin-yen Lin <treapking@chromium.org> Reviewed-by: Wenbin Mei <wenbin.mei@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20231201102747.3854573-1-treapking@chromium.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-12-07mmc: core: Use mrq.sbc in close-ended ffuAvri Altman1-3/+43
Field Firmware Update (ffu) may use close-ended or open ended sequence. Each such sequence is comprised of a write commands enclosed between 2 switch commands - to and from ffu mode. So for the close-ended case, it will be: cmd6->cmd23-cmd25-cmd6. Some host controllers however, get confused when multi-block rw is sent without sbc, and may generate auto-cmd12 which breaks the ffu sequence. I encountered this issue while testing fwupd (github.com/fwupd/fwupd) on HP Chromebook x2, a qualcomm based QC-7c, code name - strongbad. Instead of a quirk, or hooking the request function of the msm ops, it would be better to fix the ioctl handling and make it use mrq.sbc instead of issuing SET_BLOCK_COUNT separately. Signed-off-by: Avri Altman <avri.altman@wdc.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231129092535.3278-1-avri.altman@wdc.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-12-07mmc: sdhci_am654: Drop lookup for deprecated ti,otap-del-selVignesh Raghavendra1-31/+6
ti,otap-del-sel has been deprecated since v5.7 and there are no users of this property and no documentation in the DT bindings either. Drop the fallback code looking for this property, this makes sdhci_am654_get_otap_delay() much easier to read as all the TAP values can be handled via a single iterator loop. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20231122060215.2074799-1-vigneshr@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-12-07mmc: sdhci-of-dwcmshc: Use logical OR instead of bitwise OR in dwcmshc_probe()Nathan Chancellor1-3/+3
Clang warns (or errors with CONFIG_WERROR=y): drivers/mmc/host/sdhci-of-dwcmshc.c:873:7: error: use of bitwise '|' with boolean operands [-Werror,-Wbitwise-instead-of-logical] 873 | if ((device_property_read_bool(dev, "mmc-ddr-1_8v")) | | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 874 | (device_property_read_bool(dev, "mmc-hs200-1_8v")) | | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | || 875 | (device_property_read_bool(dev, "mmc-hs400-1_8v"))) | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/mmc/host/sdhci-of-dwcmshc.c:873:7: note: cast one or both operands to int to silence this warning drivers/mmc/host/sdhci-of-dwcmshc.c:873:7: error: use of bitwise '|' with boolean operands [-Werror,-Wbitwise-instead-of-logical] 873 | if ((device_property_read_bool(dev, "mmc-ddr-1_8v")) | | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | || 874 | (device_property_read_bool(dev, "mmc-hs200-1_8v")) | | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/mmc/host/sdhci-of-dwcmshc.c:873:7: note: cast one or both operands to int to silence this warning 2 errors generated. There is little reason for this if statement to use bitwise ORs, as the short circuiting of logical OR does not need to be avoided in this context; it would be wasteful to call device_property_read_bool() three times if the first two calls returned true. Switch to logical OR to fix the warning. While in the area, the parentheses around the calls to device_property_read_bool() are not necessary and make the if statement harder to read, so remove them. Closes: https://github.com/ClangBuiltLinux/linux/issues/1960 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Drew Fustini <dfustini@baylibre.com> Link: https://lore.kernel.org/r/20231116-sdhci-of-dwcmshc-fix-wbitwise-instead-of-logical-v1-1-7e1a7f4ccaab@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-12-07mmc: sdhci-of-dwcmshc: Add support for T-Head TH1520Drew Fustini1-0/+349
Add support for the mmc controller in the T-Head TH1520 with the new compatible "thead,th1520-dwcmshc". Implement custom sdhci_ops for set_uhs_signaling, reset, voltage_switch, and platform_execute_tuning. Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Drew Fustini <dfustini@baylibre.com> Link: https://lore.kernel.org/r/20231109-th1520-mmc-v5-3-018bd039cf17@baylibre.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-12-07mmc: sdhci: add __sdhci_execute_tuning() to headerDrew Fustini2-1/+3
Expose __sdhci_execute_tuning() so that it can be called from the mmc host controller drivers. In the sdhci-of-dwcmshc driver, sdhci_dwcmshc_th1520_ops sets platform_execute_tuning to th1520_execute_tuning(). That function has to manipulate phy registers before tuning can be performed. To avoid copying the code verbatim from __sdhci_execute_tuning() into th1520_execute_tuning(), make it possible for __sdhci_execute_tuning() to be called from sdhci-of-dwcmshc. Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Drew Fustini <dfustini@baylibre.com> Link: https://lore.kernel.org/r/20231109-th1520-mmc-v5-2-018bd039cf17@baylibre.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-10 06:14:17 +0300