| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
commit b1f856b1727c2eaa4be2c6d7cd7a8ed052bbeb87 upstream.
According to the hardware programming guide, the clock frequency must
remain below 52MHz during the transition to HS400 mode.
However,in the current implementation, the timing is set to HS400 (a
DDR mode) before adjusting the clock. This causes the clock to double
prematurely to 104MHz during the transition phase, violating the
specification and potentially resulting in CRC errors or CMD timeouts.
This change ensures that clock doubling is avoided during intermediate
transitions and is applied only when the card requires a 200MHz clock
for HS400 operation.
Signed-off-by: Sarthak Garg <sarthak.garg@oss.qualcomm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d3ecb12e2e04ce53c95f933c462f2d8b150b965b upstream.
MMC_SDHCI_ESDHC_IMX requires ARCH_MXC despite also being used on
ARCH_S32, which results in unmet dependencies when compiling strictly
for ARCH_S32. Resolve this by adding ARCH_S32 as an alternative to
ARCH_MXC in the driver's dependencies.
Fixes: 5c4f00627c9a ("mmc: sdhci-esdhc-imx: add NXP S32G2 support")
Cc: stable@bvger.kernel.org
Signed-off-by: Jared Kangas <jkangas@redhat.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a28352cf2d2f8380e7aca8cb61682396dca7a991 upstream.
strbin signal delay under 0x8 configuration is not stable after massive
test. The recommandation of it should be 0x4.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Tested-by: Alexey Charkov <alchark@gmail.com>
Tested-by: Hugh Cole-Baker <sigmaris@gmail.com>
Fixes: 08f3dff799d4 ("mmc: sdhci-of-dwcmshc: add rockchip platform support")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 08b68ca543ee9d5a8d2dc406165e4887dd8f170b ]
For Qualcomm SoCs which needs level shifter for SD card, extra delay is
seen on receiver data path.
To compensate this delay enable tuning for SDR50 mode for targets which
has level shifter. SDHCI_SDR50_NEEDS_TUNING caps will be set for targets
with level shifter on Qualcomm SOC's.
Signed-off-by: Sarthak Garg <quic_sartgarg@quicinc.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9c174e4dacee9fb2014a4ffc953d79a5707b77e4 ]
Wrong actual clock reported, if the SD clock division ratio is other
than 1:1(bits DIV[7:0] in SD_CLK_CTRL are set to 11111111).
On high speed mode, cat /sys/kernel/debug/mmc1/ios
Without the patch:
clock: 50000000 Hz
actual clock: 200000000 Hz
After the fix:
clock: 50000000 Hz
actual clock: 50000000 Hz
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250629203859.170850-1-biju.das.jz@bp.renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit fec40f44afdabcbc4a7748e4278f30737b54bb1a upstream.
SPI mode doesn't support cmd7, so remove it in mmc_sdio_alive() and
confirm if sdio is active by checking CCCR register value is available
or not.
Signed-off-by: Rex Chen <rex.chen_1@nxp.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250728082230.1037917-2-rex.chen_1@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 120ffe250dd95b5089d032f582c5be9e3a04b94b ]
The MMC/SDHCI controller implemented by Mobileye needs the preset value
quirks to configure the clock properly at speed slower than HS200.
It otherwise works as a standard sd4hc controller.
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Link: https://lore.kernel.org/r/e97f409650495791e07484589e1666ead570fa12.1750156323.git.benoit.monin@bootlin.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 8ab2f1c35669bff7d7ed1bb16bf5cc989b3e2e17 upstream.
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned.
Fixes: 236caa7cc351 ("mmc: SDIO driver for Marvell SoCs")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 340be332e420ed37d15d4169a1b4174e912ad6cb ]
Due to a flaw in the hardware design, the GL9763e replay timer frequently
times out when ASPM is enabled. As a result, the warning messages will
often appear in the system log when the system accesses the GL9763e
PCI config. Therefore, the replay timer timeout must be masked.
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Fixes: 1ae1d2d6e555 ("mmc: sdhci-pci-gli: Add Genesys Logic GL9763E support")
Cc: stable@vger.kernel.org
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250731065752.450231-4-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit dec8b38be4b35cae5f7fa086daf2631e2cfa09c1 ]
In preparation to fix replay timer timeout, add
sdhci_gli_mask_replay_timer_timeout() function
to simplify some of the code, allowing it to be re-used.
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Fixes: 1ae1d2d6e555 ("mmc: sdhci-pci-gli: Add Genesys Logic GL9763E support")
Cc: stable@vger.kernel.org
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250731065752.450231-2-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 951b7ccc54591ba48755b5e0c7fc8b9623a64640 ]
015c9cbcf0ad ("mmc: sdhci-pci-gli: GL9750: Mask the replay timer timeout of
AER") added PCI_GLI_9750_CORRERR_MASK, the offset of the AER Capability in
config space, and PCI_GLI_9750_CORRERR_MASK_REPLAY_TIMER_TIMEOUT, the
Replay Timer Timeout bit in the AER Correctable Error Status register.
Use pci_find_ext_capability() to locate the AER Capability and use the
existing PCI_ERR_COR_REP_TIMER definition to mask the bit.
This removes a little bit of unnecessarily device-specific code and makes
AER-related things more greppable.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20240327214831.1544595-2-helgaas@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Stable-dep-of: dec8b38be4b3 ("mmc: sdhci-pci-gli: Add a new function to simplify the code")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 293ed0f5f34e1e9df888456af4b0a021f57b5f54 upstream.
In preparation to fix replay timer timeout, rename the
gli_set_gl9763e() to gl9763e_hw_setting() for consistency.
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Fixes: 1ae1d2d6e555 ("mmc: sdhci-pci-gli: Add Genesys Logic GL9763E support")
Cc: stable@vger.kernel.org
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250731065752.450231-3-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 47a255f7d2eabee06cfbf5b1c2379749442fd01d ]
In the error path of sd_set_power_mode() we don't update host->power_mode,
which could lead to an imbalance of the runtime PM usage count. Fix this by
always updating host->power_mode.
Reviewed-by: Avri Altman <avri.altman@sandisk.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Ricky Wu <ricky_wu@realtek.com>
Link: https://lore.kernel.org/r/20250610111633.504366-2-ulf.hansson@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit db58532188ebf51d52b1d7693d9e94c76b926e9f ]
Many mobile phones feature multi-card tray designs, where the same
tray is used for both SD and SIM cards. If the SD card is placed
at the outermost location in the tray, the SIM card may come in
contact with SD card power-supply while removing the tray, possibly
resulting in SIM damage.
To prevent that, make sure the SD card is really inserted by reading
the Card Detect pin state. If it's not, turn off the power in
sdhci_msm_check_power_status() and also set the BUS_FAIL power state
on the controller as part of pwr_irq handling for BUS_ON request.
Signed-off-by: Sarthak Garg <quic_sartgarg@quicinc.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250701100659.3310386-1-quic_sartgarg@quicinc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 6d0b1c01847fedd7c85a5cdf59b8cfc7d14512e6 upstream.
Errata i2312 [0] for K3 silicon mentions the maximum obtainable
timeout through MMC host controller is 700ms. And for commands taking
longer than 700ms, hardware timeout should be disabled and software
timeout should be used.
The workaround for Errata i2312 can be achieved by adding
SDHCI_QUIRK2_DISABLE_HW_TIMEOUT quirk in sdhci_am654.
[0] https://www.ti.com/lit/pdf/sprz487
Signed-off-by: Judith Mendez <jm@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 41fd4caeb00b ("mmc: sdhci_am654: Add Initial Support for AM654 SDHCI driver")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250626231452.3460987-1-jm@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
models
commit 50c78f398e92fafa1cbba3469c95fe04b2e4206d upstream.
Disable command queuing on Intel GLK-based Positivo models.
Without this quirk, CQE (Command Queuing Engine) causes instability
or I/O errors during operation. Disabling it ensures stable
operation on affected devices.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Fixes: bedf9fc01ff1 ("mmc: sdhci: Workaround broken command queuing on Intel GLK")
Cc: stable@vger.kernel.org
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250626112442.9791-1-edson.drosdeck@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ff09b71bf9daeca4f21d6e5e449641c9fad75b53 upstream.
The dma_unmap_sg() functions should be called with the same nents as the
dma_map_sg(), not the value the map function returned.
Fixes: 2f5da678351f ("mmc: bcm2835: Properly handle dmaengine_prep_slave_sg")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250630093510.82871-2-fourier.thomas@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit ec54c0a20709ed6e56f40a8d59eee725c31a916b upstream.
Do not leave host with dangling ->mrq pointer if we hit
the msdc_prepare_data() error out path.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Fixes: f5de469990f1 ("mtk-sd: Prevent memory corruption from DMA map failure")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250625052106.584905-1-senozhatsky@chromium.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f5de469990f19569627ea0dd56536ff5a13beaa3 upstream.
If msdc_prepare_data() fails to map the DMA region, the request is
not prepared for data receiving, but msdc_start_data() proceeds
the DMA with previous setting.
Since this will lead a memory corruption, we have to stop the
request operation soon after the msdc_prepare_data() fails to
prepare it.
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Fixes: 208489032bdd ("mmc: mediatek: Add Mediatek MMC driver")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/174972756982.3337526.6755001617701603082.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 539d80575b810c7a5987c7ac8915e3bc99c03695 upstream.
When swiotlb buffer is full, the dma_map_sg() returns 0 to
msdc_prepare_data(), but it does not check it and sets the
MSDC_PREPARE_FLAG.
swiotlb_tbl_map_single() /* prints "swiotlb buffer is full" */
<-swiotlb_map()
<-dma_direct_map_page()
<-dma_direct_map_sg()
<-__dma_map_sg_attrs()
<-dma_map_sg_attrs()
<-dma_map_sg() /* returns 0 (pages mapped) */
<-msdc_prepare_data()
Then, the msdc_unprepare_data() checks MSDC_PREPARE_FLAG and calls
dma_unmap_sg() with unmapped pages. It causes a page fault.
To fix this problem, Do not set MSDC_PREPARE_FLAG if dma_map_sg()
fails because this is not prepared.
Fixes: 208489032bdd ("mmc: mediatek: Add Mediatek MMC driver")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Tested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/174908565814.4056588.769599127120955383.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 009c3a4bc41e855fd76f92727f9fbae4e5917d7f upstream.
Move the BROKEN_SD_DISCARD quirk for certain SanDisk SD cards from the
`mmc_blk_fixups[]` to `mmc_sd_fixups[]`. This ensures the quirk is
applied earlier in the device initialization process, aligning with the
reasoning in [1]. Applying the quirk sooner prevents the kernel from
incorrectly enabling discard support on affected cards during initial
setup.
[1] https://lore.kernel.org/all/20240820230631.GA436523@sony.com
Fixes: 07d2872bf4c8 ("mmc: core: Add SD card quirk for broken discard")
Signed-off-by: Avri Altman <avri.altman@sandisk.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250526114445.675548-1-avri.altman@sandisk.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dcc3bcfc5b50c625b475dcc25d167b6b947a6637 upstream.
It has turned out the trying to strictly conform to the SDHCI specification
is causing problems. Let's revert and start over.
This reverts commit fb3bbc46c94f261b6156ee863c1b06c84cf157dc.
Cc: Erick Shepherd <erick.shepherd@ni.com>
Cc: stable@vger.kernel.org
Fixes: fb3bbc46c94f ("mmc: sdhci: Disable SD card clock before changing parameters")
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Reported-by: Jonathan Liu <net147@gmail.com>
Reported-by: Salvatore Bonaccorso <carnil@debian.org>
Closes: https://bugs.debian.org/1108065
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250624110932.176925-1-ulf.hansson@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2881ba9af073faa8ee7408a8d1e0575e50eb3f6c upstream.
Add a helper function for dump register in dynamic debug mode.
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250606110121.96314-3-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9510b38dc0ba358c93cbf5ee7c28820afb85937b ]
Adds the MMC_QUIRK_NO_UHS_DDR50_TUNING quirk and updates
mmc_execute_tuning() to return 0 if that quirk is set. This fixes an
issue on certain Swissbit SD cards that do not support DDR50 tuning
where tuning requests caused I/O errors to be thrown.
Signed-off-by: Erick Shepherd <erick.shepherd@ni.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250331221337.1414534-1-erick.shepherd@ni.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fb3bbc46c94f261b6156ee863c1b06c84cf157dc ]
Per the SD Host Controller Simplified Specification v4.20 §3.2.3, change
the SD card clock parameters only after first disabling the external card
clock. Doing this fixes a spurious clock pulse on Baytrail and Apollo Lake
SD controllers which otherwise breaks voltage switching with a specific
Swissbit SD card.
Signed-off-by: Kyle Roeschley <kyle.roeschley@ni.com>
Signed-off-by: Brad Mouring <brad.mouring@ni.com>
Signed-off-by: Erick Shepherd <erick.shepherd@ni.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250211214645.469279-1-erick.shepherd@ni.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7cbe799ac10fd8be85af5e0615c4337f81e575f3 ]
Add support for Exynos7870 DW MMC controllers, for both SMU and non-SMU
variants. These controllers require a quirk to access 64-bit FIFO in 32-bit
accesses (DW_MMC_QUIRK_FIFO64_32).
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://lore.kernel.org/r/20250219-exynos7870-mmc-v2-3-b4255a3e39ed@disroot.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 31e75ed964582257f59156ce6a42860e1ae4cc39 ]
The SD spec version 6.0 section 6.4.1.5 requires that Vdd must be
lowered to less than 0.5V for a minimum of 1 ms when powering off a
card. Increase wait to 15 ms so that voltage has time to drain down
to 0.5V and cards can power off correctly. Issues with voltage drain
time were only observed on Apollo Lake and Bay Trail host controllers
so this fix is limited to those devices.
Signed-off-by: Erick Shepherd <erick.shepherd@ni.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250314195021.1588090-1-erick.shepherd@ni.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 649b50a82f09fa44c2f7a65618e4584072145ab7 upstream.
After moving tmio_mmc_host_probe down, error handling has to be
adjusted.
Fixes: 74f45de394d9 ("mmc: renesas_sdhi: register irqs before registering controller")
Reviewed-by: Ihar Salauyou <salauyou.ihar@gmail.com>
Signed-off-by: Ruslan Piasetskyi <ruslan.piasetskyi@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250326220638.460083-1-ruslan.piasetskyi@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit cbef7442fba510b7eb229dcc9f39d3dde4a159a4 ]
The driver leaks the device reference taken with
of_find_device_by_node(). Fix the leak by using devm_of_qcom_ice_get().
Fixes: c7eed31e235c ("mmc: sdhci-msm: Switch to the new ICE API")
Cc: stable@vger.kernel.org
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250117-qcom-ice-fix-dev-leak-v2-2-1ffa5b6884cb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 57c0902f8bec51add5a1eb908d8b876592725d81 ]
In certain DW MMC implementations (such as in some Exynos7870
controllers), 64-bit read/write is not allowed from a 64-bit FIFO.
Add a quirk which facilitates accessing the 64-bit FIFO registers in two
32-bit halves.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://lore.kernel.org/r/20250219-exynos7870-mmc-v2-2-b4255a3e39ed@disroot.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 49d162635151d0dd04935070d7cf67137ab863aa upstream.
We have received reports about cards can become corrupt related to the
aggressive PM support. Let's make a partial revert of the change that
enabled the feature.
Reported-by: David Owens <daowens01@gmail.com>
Reported-by: Romain Naour <romain.naour@smile.fr>
Reported-by: Robert Nelson <robertcnelson@gmail.com>
Tested-by: Robert Nelson <robertcnelson@gmail.com>
Fixes: 3edf588e7fe0 ("mmc: sdhci-omap: Allow SDIO card power off and enable aggressive PM")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20250312121712.1168007-1-ulf.hansson@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a41fcca4b342811b473bbaa4b44f1d34d87fcce6 upstream.
Set the MMC_CAP_NEED_RSP_BUSY capability for the sdhci-pxav3 host to
prevent conversion of R1B responses to R1. Without this, the eMMC card
in the samsung,coreprimevelte smartphone using the Marvell PXA1908 SoC
with this mmc host doesn't probe with the ETIMEDOUT error originating in
__mmc_poll_for_busy.
Note that the other issues reported for this phone and host, namely
floods of "Tuning failed, falling back to fixed sampling clock" dmesg
messages for the eMMC and unstable SDIO are not mitigated by this
change.
Link: https://lore.kernel.org/r/20200310153340.5593-1-ulf.hansson@linaro.org/
Link: https://lore.kernel.org/r/D7204PWIGQGI.1FRFQPPIEE2P9@matfyz.cz/
Link: https://lore.kernel.org/r/20250115-pxa1908-lkml-v14-0-847d24f3665a@skole.hr/
Cc: stable@vger.kernel.org
Signed-off-by: Karel Balej <balejk@matfyz.cz>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Duje Mihanović <duje.mihanovic@skole.hr>
Link: https://lore.kernel.org/r/20250310140707.23459-1-balejk@matfyz.cz
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3834a759afb817e23a7a2f09c2c9911b0ce5c588 upstream.
Add err_free_host label to properly pair mmc_alloc_host() with
mmc_free_host() in GPIO error paths. The allocated host memory was
leaked when GPIO lookups failed.
Fixes: e519f0bb64ef ("ARM/mmc: Convert old mmci-omap to GPIO descriptors")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250318140226.19650-1-linmq006@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e51a349d2dcf1df8422dabb90b2f691dc7df6f92 upstream.
The error path when atmci_configure_dma() set dma fails in atmci driver
does not correctly disable the clock.
Add the missing clk_disable_unprepare() to the error path for pair with
clk_prepare_enable().
Fixes: 467e081d23e6 ("mmc: atmel-mci: use probe deferring if dma controller is not ready yet")
Signed-off-by: Gu Bowen <gubowen5@huawei.com>
Acked-by: Aubin Constans <aubin.constans@microchip.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250225022856.3452240-1-gubowen5@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 723ef0e20dbb2aa1b5406d2bb75374fc48187daa upstream.
cqhci timeouts observed on brcmstb platforms during suspend:
...
[ 164.832853] mmc0: cqhci: timeout for tag 18
...
Adding cqhci_suspend()/resume() calls to disable cqe
in sdhci_brcmstb_suspend()/resume() respectively to fix
CQE timeouts seen on PM suspend.
Fixes: d46ba2d17f90 ("mmc: sdhci-brcmstb: Add support for Command Queuing (CQE)")
Cc: stable@vger.kernel.org
Signed-off-by: Kamal Dasu <kamal.dasu@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20250311165946.28190-1-kamal.dasu@broadcom.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3e68abf2b9cebe76c6cd4b1aca8e95cd671035a3 upstream.
For hs400(es) mode, the 'hs400-ds-delay' is typically configured in the
dts. However, some projects may only define 'mediatek,hs400-ds-dly3',
which can lead to initialization failures in hs400es mode. CMD13 reported
response crc error in the mmc_switch_status() just after switching to
hs400es mode.
[ 1.914038][ T82] mmc0: mmc_select_hs400es failed, error -84
[ 1.914954][ T82] mmc0: error -84 whilst initialising MMC card
Currently, the hs400_ds_dly3 value is set within the tuning function. This
means that the PAD_DS_DLY3 field is not configured before tuning process,
which is the reason for the above-mentioned CMD13 response crc error.
Move the PAD_DS_DLY3 field configuration into msdc_prepare_hs400_tuning(),
and add a value check of hs400_ds_delay to prevent overwriting by zero when
the 'hs400-ds-delay' is not set in the dts. In addition, since hs400(es)
only tune the PAD_DS_DLY1, the PAD_DS_DLY2_SEL bit should be cleared to
bypass it.
Fixes: c4ac38c6539b ("mmc: mtk-sd: Add HS400 online tuning support")
Signed-off-by: Andy-ld Lu <andy-ld.lu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250123092644.7359-1-andy-ld.lu@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 20a0c37e44063997391430c4ae09973e9cbc3911 ]
Qualcomm regulator supports two power supply modes: HPM and LPM.
Currently, the sdhci-msm.c driver does not set the load to adjust
the current for eMMC and SD. If the regulator dont't set correct
load in LPM state, it will lead to the inability to properly
initialize eMMC and SD.
Set the correct regulator current for eMMC and SD to ensure that the
device can work normally even when the regulator is in LPM.
Signed-off-by: Yuanjie Yang <quic_yuanjiey@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250114083514.258379-1-quic_yuanjiey@quicinc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a2a44f8da29352f76c99c6904ee652911b8dc7dd ]
The card-quirk was added to limit the clock-rate for a card with UHS-mode
support, although let's respect the quirk for non-UHS mode too, to make the
behaviour consistent.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Message-ID: <1732268242-72799-1-git-send-email-shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 8d90a86ed053226a297ce062f4d9f4f521e05c4c upstream.
Commit c7eed31e235c ("mmc: sdhci-msm: Switch to the new ICE API")
introduced an incorrect check of the algorithm ID into the key eviction
path, and thus qcom_ice_evict_key() is no longer ever called. Fix it.
Fixes: c7eed31e235c ("mmc: sdhci-msm: Switch to the new ICE API")
Cc: stable@vger.kernel.org
Cc: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Message-ID: <20241213041958.202565-6-ebiggers@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f3d87abe11ed04d1b23a474a212f0e5deeb50892 upstream.
Current implementation leaves pdev->dev as a wakeup source. Add a
device_init_wakeup(&pdev->dev, false) call in the .remove() function and
in the error path of the .probe() function.
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Fixes: 527f36f5efa4 ("mmc: mediatek: add support for SDIO eint wakup IRQ")
Cc: stable@vger.kernel.org
Message-ID: <20241203023442.2434018-1-joe@pf.is.s.u-tokyo.ac.jp>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a56335c85b592cb2833db0a71f7112b7d9f0d56b upstream.
Value 0 in ADMA length descriptor is interpreted as 65536 on new Tegra
chips, remove SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC quirk to make sure max
ADMA2 length is 65536.
Fixes: 4346b7c7941d ("mmc: tegra: Add Tegra186 support")
Cc: stable@vger.kernel.org
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Message-ID: <20241209101009.22710-1-pshete@nvidia.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 4dede2b76f4a760e948e1a49b1520881cb459bd3 ]
Enable SDHCI_QUIRK_NO_LED for i.MX7ULP, i.MX8MM, i.MX8QXP and
i.MXRT1050. Even there is LCTL register bit, there is no IOMUX PAD
for it. So there is no sense to enable LED for SDHCI for these SoCs.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240923062016.1165868-1-peng.fan@oss.nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cd068d51594d9635bf6688fc78717572b78bce6a ]
GIGASTONE Gaming Plus microSD cards manufactured on 02/2022 report that
they support poweroff notification and cache, but they are not working
correctly.
Flush Cache bit never gets cleared in sd_flush_cache() and Poweroff
Notification Ready bit also never gets set to 1 within 1 second from the
end of busy of CMD49 in sd_poweroff_notify().
This leads to I/O error and runtime PM error state.
I observed that the same card manufactured on 01/2024 works as expected.
This problem seems similar to the Kingston cards fixed with
commit c467c8f08185 ("mmc: Add MMC_QUIRK_BROKEN_SD_CACHE for Kingston
Canvas Go Plus from 11/2019") and should be handled using quirks.
CID for the problematic card is here.
12345641535443002000000145016200
Manufacturer ID is 0x12 and defined as CID_MANFID_GIGASTONE as of now,
but would like comments on what naming is appropriate because MID list
is not public and not sure it's right.
Signed-off-by: Keita Aihara <keita.aihara@sony.com>
Link: https://lore.kernel.org/r/20240913094417.GA4191647@sony.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 87a0d90fcd31c0f36da0332428c9e1a1e0f97432 upstream.
Disabling card detect from the host's ->shutdown_pre() callback turned out
to not be the complete solution. More precisely, beyond the point when the
mmc_bus->shutdown() has been called, to gracefully power off the card, we
need to prevent card detect. Otherwise the mmc_rescan work may poll for the
card with a CMD13, to see if it's still alive, which then will fail and
hang as the card has already been powered off.
To fix this problem, let's disable mmc_rescan prior to power off the card
during shutdown.
Reported-by: Anthony Pighin <anthony.pighin@nokia.com>
Fixes: 66c915d09b94 ("mmc: core: Disable card detect during shutdown")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Closes: https://lore.kernel.org/all/BN0PR08MB695133000AF116F04C3A9FFE83212@BN0PR08MB6951.namprd08.prod.outlook.com/
Tested-by: Anthony Pighin <anthony.pighin@nokia.com>
Message-ID: <20241125122446.18684-1-ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7f0fa47ceebcff0e3591bb7e32a71a2cd7846149 upstream.
The Vexia Edu Atla 10 tablet distributed to schools in the Spanish
Andalucía region has no ACPI fwnode associated with the SDHCI controller
for its microsd-slot and thus has no ACPI GPIO resource info.
This causes the following error to be logged and the slot to not work:
[ 10.572113] sdhci-pci 0000:00:12.0: failed to setup card detect gpio
Add a DMI quirk table for providing gpiod_lookup_tables with manually
provided CD GPIO info and use this DMI table to provide the CD GPIO info
on this tablet. This fixes the microsd-slot not working.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Message-ID: <20241118210049.311079-1-hdegoede@redhat.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 2508925fb346661bad9f50b497d7ac7d0b6085d0 ]
Currently, the MMC_CAP2_CRYPTO flag is set by default for eMMC hosts.
However, this flag should not be set for hosts that do not support inline
encryption.
The 'crypto' clock, as described in the documentation, is used for data
encryption and decryption. Therefore, only hosts that are configured with
this 'crypto' clock should have the MMC_CAP2_CRYPTO flag set.
Fixes: 7b438d0377fb ("mmc: mtk-sd: add Inline Crypto Engine clock control")
Fixes: ed299eda8fbb ("mmc: mtk-sd: fix devm_clk_get_optional usage")
Signed-off-by: Andy-ld Lu <andy-ld.lu@mediatek.com>
Cc: stable@vger.kernel.org
Message-ID: <20241111085039.26527-1-andy-ld.lu@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ed299eda8fbb37cb0e05c7001ab6a6b2627ec087 ]
This already returns NULL when not found. However, it can return
EPROBE_DEFER and should thus return here.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://lore.kernel.org/r/20240930224919.355359-4-rosenp@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Stable-dep-of: 2508925fb346 ("mmc: mtk-sd: Fix MMC_CAP2_CRYPTO flag setting")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 291220451c775a054cedc4fab4578a1419eb6256 ]
In the probe function, it goes to 'release_mem' label and returns after
some procedure failure. But if the clocks (partial or all) have been
enabled previously, they would not be disabled in msdc_runtime_suspend,
since runtime PM is not yet enabled for this case.
That cause mmc related clocks always on during system suspend and block
suspend flow. Below log is from a SDCard issue of MT8196 chromebook, it
returns -ETIMEOUT while polling clock stable in the msdc_ungate_clock()
and probe failed, but the enabled clocks could not be disabled anyway.
[ 129.059253] clk_chk_dev_pm_suspend()
[ 129.350119] suspend warning: msdcpll is on
[ 129.354494] [ck_msdc30_1_sel : enabled, 1, 1, 191999939, ck_msdcpll_d2]
[ 129.362787] [ck_msdcpll_d2 : enabled, 1, 1, 191999939, msdcpll]
[ 129.371041] [ck_msdc30_1_ck : enabled, 1, 1, 191999939, ck_msdc30_1_sel]
[ 129.379295] [msdcpll : enabled, 1, 1, 383999878, clk26m]
Add a new 'release_clk' label and reorder the error handle functions to
make sure the clocks be disabled after probe failure.
Fixes: ffaea6ebfe9c ("mmc: mtk-sd: Use readl_poll_timeout instead of open-coded polling")
Fixes: 7a2fa8eed936 ("mmc: mtk-sd: use devm_mmc_alloc_host")
Signed-off-by: Andy-ld Lu <andy-ld.lu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: stable@vger.kernel.org
Message-ID: <20241107121215.5201-1-andy-ld.lu@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7a2fa8eed936b33b22e49b1d2349cd7d02f22710 ]
Allows removing several gotos.
Also fixed some wrong ones.
Added dev_err_probe where EPROBE_DEFER is possible.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://lore.kernel.org/r/20240930224919.355359-2-rosenp@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Stable-dep-of: 291220451c77 ("mmc: mtk-sd: Fix error handle of probe function")
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 328bda09cc91b3d93bc64f4a4dadc44313dd8140 ]
GCC 13 complains about the truncated output of snprintf():
drivers/mmc/host/mmc_spi.c: In function ‘mmc_spi_response_get’:
drivers/mmc/host/mmc_spi.c:227:64: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
227 | snprintf(tag, sizeof(tag), " ... CMD%d response SPI_%s",
| ^
drivers/mmc/host/mmc_spi.c:227:9: note: ‘snprintf’ output between 26 and 43 bytes into a destination of size 32
227 | snprintf(tag, sizeof(tag), " ... CMD%d response SPI_%s",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
228 | cmd->opcode, maptype(cmd));
Drop it and fold the string it generates into the only place where it's
emitted - the dev_dbg() call at the end of the function.
Fixes: 15a0580ced08 ("mmc_spi host driver")
Suggested-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20241008160134.69934-1-brgl@bgdev.pl
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
