summaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)AuthorFilesLines
2021-07-19mmc: core: Allow UHS-I voltage switch for SDSC cards if supportedChristian Löhle1-4/+6
commit 09247e110b2efce3a104e57e887c373e0a57a412 upstream. While initializing an UHS-I SD card, the mmc core first tries to switch to 1.8V I/O voltage, before it continues to change the settings for the bus speed mode. However, the current behaviour in the mmc core is inconsistent and doesn't conform to the SD spec. More precisely, an SD card that supports UHS-I must set both the SD_OCR_CCS bit and the SD_OCR_S18R bit in the OCR register response. When switching to 1.8V I/O the mmc core correctly checks both of the bits, but only the SD_OCR_S18R bit when changing the settings for bus speed mode. Rather than actually fixing the code to confirm to the SD spec, let's deliberately deviate from it by requiring only the SD_OCR_S18R bit for both parts. This enables us to support UHS-I for SDSC cards (outside spec), which is actually being supported by some existing SDSC cards. Moreover, this fixes the inconsistent behaviour. Signed-off-by: Christian Loehle <cloehle@hyperstone.com> Link: https://lore.kernel.org/r/CWXP265MB26803AE79E0AD5ED083BF2A6C4529@CWXP265MB2680.GBRP265.PROD.OUTLOOK.COM Cc: stable@vger.kernel.org [Ulf: Rewrote commit message and comments to clarify the changes] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-19mmc: core: clear flags before allowing to retuneWolfram Sang1-2/+5
commit 77347eda64ed5c9383961d1de9165f9d0b7d8df6 upstream. It might be that something goes wrong during tuning so the MMC core will immediately trigger a retune. In our case it was: - we sent a tuning block - there was an error so we need to send an abort cmd to the eMMC - the abort cmd had a CRC error - retune was set by the MMC core This lead to a vicious circle causing a performance regression of 75%. So, clear retuning flags before we enable retuning to start with a known cleared state. Reported-by Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Suggested-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Fixes: bd11e8bd03ca ("mmc: core: Flag re-tuning is needed on CRC errors") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210624151616.38770-2-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-19mmc: sdhci: Fix warning message when accessing RPMB in HS400 modeAl Cooper2-0/+5
commit d0244847f9fc5e20df8b7483c8a4717fe0432d38 upstream. When an eMMC device is being run in HS400 mode, any access to the RPMB device will cause the error message "mmc1: Invalid UHS-I mode selected". This happens as a result of tuning being disabled before RPMB access and then re-enabled after the RPMB access is complete. When tuning is re-enabled, the system has to switch from HS400 to HS200 to do the tuning and then back to HS400. As part of sequence to switch from HS400 to HS200 the system is temporarily put into HS mode. When switching to HS mode, sdhci_get_preset_value() is called and does not have support for HS mode and prints the warning message and returns the preset for SDR12. The fix is to add support for MMC and SD HS modes to sdhci_get_preset_value(). This can be reproduced on any system running eMMC in HS400 mode (not HS400ES) by using the "mmc" utility to run the following command: "mmc rpmb read-counter /dev/mmcblk0rpmb". Signed-off-by: Al Cooper <alcooperx@gmail.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: 52983382c74f ("mmc: sdhci: enhance preset value function") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210624163045.33651-1-alcooperx@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-19mmc: sdhci-acpi: Disable write protect detection on Toshiba Encore 2 WT8-BHans de Goede1-0/+11
commit 94ee6782e045645abd9180ab9369b01293d862bd upstream. On the Toshiba Encore 2 WT8-B the microSD slot always reports the card being write-protected even though microSD cards do not have a write-protect switch at all. Add a new DMI_QUIRK_SD_NO_WRITE_PROTECT quirk entry to sdhci-acpi.c's DMI quirk table for this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20210503092157.5689-1-hdegoede@redhat.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-14mmc: vub3000: fix control-request directionJohan Hovold1-1/+1
commit 3c0bb3107703d2c58f7a0a7a2060bb57bc120326 upstream. The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation. Fix the SET_ROM_WAIT_STATES request which erroneously used usb_rcvctrlpipe(). Fixes: 88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver") Cc: stable@vger.kernel.org # 3.0 Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20210521133026.17296-1-johan@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-14mmc: block: Disable CMDQ on the ioctl pathBean Huo1-0/+8
commit 70b52f09080565030a530a784f1c9948a7f48ca3 upstream. According to the eMMC Spec: "When command queuing is enabled (CMDQ Mode En bit in CMDQ_MODE_EN field is set to ‘1’) class 11 commands are the only method through which data transfer tasks can be issued. Existing data transfer commands, namely CMD18/CMD17 and CMD25/CMD24, are not supported when command queuing is enabled." which means if CMDQ is enabled, the FFU commands will not be supported. To fix this issue, just simply disable CMDQ on the ioctl path, and re-enable CMDQ once ioctl request is completed. Tested-by: Michael Brunner <Michael.Brunner@kontron.com> Signed-off-by: Bean Huo <beanhuo@micron.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: 1e8e55b67030 (mmc: block: Add CQE support) Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210504203209.361597-1-huobean@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-14mmc: usdhi6rol0: fix error return code in usdhi6_probe()Zhen Lei1-0/+1
[ Upstream commit 2f9ae69e5267f53e89e296fccee291975a85f0eb ] Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: 75fa9ea6e3c0 ("mmc: add a driver for the Renesas usdhi6rol0 SD/SDIO host controller") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20210508020321.1677-1-thunder.leizhen@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14mmc: sdhci-of-aspeed: Turn down a phase correction warningAndrew Jeffery1-1/+1
[ Upstream commit a7ab186f60785850b5af1be183867000485ad491 ] The card timing and the bus frequency are not changed atomically with respect to calls to the set_clock() callback in the driver. The result is the driver sees a transient state where there's a mismatch between the two and thus the inputs to the phase correction calculation formula are garbage. Switch from dev_warn() to dev_dbg() to avoid noise in the normal case, though the change does make bad configurations less likely to be noticed. Reported-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20210607013020.85885-1-andrew@aj.id.au Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14mmc: via-sdmmc: add a check against NULL pointer dereferenceZheyu Ma1-0/+3
[ Upstream commit 45c8ddd06c4b729c56a6083ab311bfbd9643f4a6 ] Before referencing 'host->data', the driver needs to check whether it is null pointer, otherwise it will cause a null pointer reference. This log reveals it: [ 29.355199] BUG: kernel NULL pointer dereference, address: 0000000000000014 [ 29.357323] #PF: supervisor write access in kernel mode [ 29.357706] #PF: error_code(0x0002) - not-present page [ 29.358088] PGD 0 P4D 0 [ 29.358280] Oops: 0002 [#1] PREEMPT SMP PTI [ 29.358595] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.12.4- g70e7f0549188-dirty #102 [ 29.359164] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 29.359978] RIP: 0010:via_sdc_isr+0x21f/0x410 [ 29.360314] Code: ff ff e8 84 aa d0 fd 66 45 89 7e 28 66 41 f7 c4 00 10 75 56 e8 72 aa d0 fd 66 41 f7 c4 00 c0 74 10 e8 65 aa d0 fd 48 8b 43 18 <c7> 40 14 ac ff ff ff e8 55 aa d0 fd 48 89 df e8 ad fb ff ff e9 77 [ 29.361661] RSP: 0018:ffffc90000118e98 EFLAGS: 00010046 [ 29.362042] RAX: 0000000000000000 RBX: ffff888107d77880 RCX: 0000000000000000 [ 29.362564] RDX: 0000000000000000 RSI: ffffffff835d20bb RDI: 00000000ffffffff [ 29.363085] RBP: ffffc90000118ed8 R08: 0000000000000001 R09: 0000000000000001 [ 29.363604] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000008600 [ 29.364128] R13: ffff888107d779c8 R14: ffffc90009c00200 R15: 0000000000008000 [ 29.364651] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 29.365235] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 29.365655] CR2: 0000000000000014 CR3: 0000000005a2e000 CR4: 00000000000006e0 [ 29.366170] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 29.366683] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 29.367197] Call Trace: [ 29.367381] <IRQ> [ 29.367537] __handle_irq_event_percpu+0x53/0x3e0 [ 29.367916] handle_irq_event_percpu+0x35/0x90 [ 29.368247] handle_irq_event+0x39/0x60 [ 29.368632] handle_fasteoi_irq+0xc2/0x1d0 [ 29.368950] __common_interrupt+0x7f/0x150 [ 29.369254] common_interrupt+0xb4/0xd0 [ 29.369547] </IRQ> [ 29.369708] asm_common_interrupt+0x1e/0x40 [ 29.370016] RIP: 0010:native_safe_halt+0x17/0x20 [ 29.370360] Code: 07 0f 00 2d db 80 43 00 f4 5d c3 0f 1f 84 00 00 00 00 00 8b 05 c2 37 e5 01 55 48 89 e5 85 c0 7e 07 0f 00 2d bb 80 43 00 fb f4 <5d> c3 cc cc cc cc cc cc cc 55 48 89 e5 e8 67 53 ff ff 8b 0d f9 91 [ 29.371696] RSP: 0018:ffffc9000008fe90 EFLAGS: 00000246 [ 29.372079] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 [ 29.372595] RDX: 0000000000000000 RSI: ffffffff854f67a4 RDI: ffffffff85403406 [ 29.373122] RBP: ffffc9000008fe90 R08: 0000000000000001 R09: 0000000000000001 [ 29.373646] R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff86009188 [ 29.374160] R13: 0000000000000000 R14: 0000000000000000 R15: ffff888100258000 [ 29.374690] default_idle+0x9/0x10 [ 29.374944] arch_cpu_idle+0xa/0x10 [ 29.375198] default_idle_call+0x6e/0x250 [ 29.375491] do_idle+0x1f0/0x2d0 [ 29.375740] cpu_startup_entry+0x18/0x20 [ 29.376034] start_secondary+0x11f/0x160 [ 29.376328] secondary_startup_64_no_verify+0xb0/0xbb [ 29.376705] Modules linked in: [ 29.376939] Dumping ftrace buffer: [ 29.377187] (ftrace buffer empty) [ 29.377460] CR2: 0000000000000014 [ 29.377712] ---[ end trace 51a473dffb618c47 ]--- [ 29.378056] RIP: 0010:via_sdc_isr+0x21f/0x410 [ 29.378380] Code: ff ff e8 84 aa d0 fd 66 45 89 7e 28 66 41 f7 c4 00 10 75 56 e8 72 aa d0 fd 66 41 f7 c4 00 c0 74 10 e8 65 aa d0 fd 48 8b 43 18 <c7> 40 14 ac ff ff ff e8 55 aa d0 fd 48 89 df e8 ad fb ff ff e9 77 [ 29.379714] RSP: 0018:ffffc90000118e98 EFLAGS: 00010046 [ 29.380098] RAX: 0000000000000000 RBX: ffff888107d77880 RCX: 0000000000000000 [ 29.380614] RDX: 0000000000000000 RSI: ffffffff835d20bb RDI: 00000000ffffffff [ 29.381134] RBP: ffffc90000118ed8 R08: 0000000000000001 R09: 0000000000000001 [ 29.381653] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000008600 [ 29.382176] R13: ffff888107d779c8 R14: ffffc90009c00200 R15: 0000000000008000 [ 29.382697] FS: 0000000000000000(0000) GS:ffff88817bc80000(0000) knlGS:0000000000000000 [ 29.383277] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 29.383697] CR2: 0000000000000014 CR3: 0000000005a2e000 CR4: 00000000000006e0 [ 29.384223] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 29.384736] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 29.385260] Kernel panic - not syncing: Fatal exception in interrupt [ 29.385882] Dumping ftrace buffer: [ 29.386135] (ftrace buffer empty) [ 29.386401] Kernel Offset: disabled [ 29.386656] Rebooting in 1 seconds.. Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Link: https://lore.kernel.org/r/1622727200-15808-1-git-send-email-zheyuma97@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-07-14mmc: sdhci-sprd: use sdhci_sprd_writewKrzysztof Kozlowski1-0/+1
[ Upstream commit 961470820021e6f9d74db4837bd6831a1a30341b ] The sdhci_sprd_writew() was defined by never used in sdhci_ops: drivers/mmc/host/sdhci-sprd.c:134:20: warning: unused function 'sdhci_sprd_writew' Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210601095403.236007-2-krzysztof.kozlowski@canonical.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-30mmc: meson-gx: use memcpy_to/fromio for dram-access-quirkNeil Armstrong1-5/+45
commit 103a5348c22c3fca8b96c735a9e353b8a0801842 upstream. It has been reported that usage of memcpy() to/from an iomem mapping is invalid, and a recent arm64 memcpy update [1] triggers a memory abort when dram-access-quirk is used on the G12A/G12B platforms. This adds a local sg_copy_to_buffer which makes usage of io versions of memcpy when dram-access-quirk is enabled. [1] 285133040e6c ("arm64: Import latest memcpy()/memmove() implementation") Fixes: acdc8e71d9bb ("mmc: meson-gx: add dram-access-quirk") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20210609150230.9291-1-narmstrong@baylibre.com Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16mmc: renesas_sdhi: Fix HS400 on R-Car M3-W+Geert Uytterhoeven1-1/+1
commit 6687cd72aa9112a454a4646986e0402dd1b07d0e upstream. R-Car M3-W ES3.0 is marketed as R-Car M3-W+ (R8A77961), and has its own compatible value "renesas,r8a77961". Hence using soc_device_match() with soc_id = "r8a7796" and revision = "ES3.*" does not actually match running on an R-Car M3-W+ SoC. Fix this by matching with soc_id = "r8a77961" instead. Fixes: a38c078fea0b1393 ("mmc: renesas_sdhi: Avoid bad TAP in HS400") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/ee8af5d631f5331139ffea714539030d97352e93.1622811525.git.geert+renesas@glider.be Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16mmc: renesas_sdhi: abort tuning when timeout detectedWolfram Sang1-1/+6
commit 2c9017d0b5d3fbf17e69577a42d9e610ca122810 upstream. We have to bring the eMMC from sending-data state back to transfer state once we detected a CRC error (timeout) during tuning. So, send a stop command via mmc_abort_tuning(). Fixes: 4f11997773b6 ("mmc: tmio: Add tuning support") Reported-by Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20210602073435.5955-1-wsa+renesas@sang-engineering.com Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26mmc: meson-gx: also check SD_IO_RW_EXTENDED for scatterlist size alignmentNeil Armstrong1-1/+2
commit 9b81354d7ebc1fd17f666a168dcabf27dae290bd upstream. The brcmfmac driver can generate a scatterlist from a skb with each packets not aligned to the block size. This is not supported by the Amlogic Descriptor dma engine where each descriptor must match a multiple of the block size. The sg list is valid, since the sum of the sg buffers is a multiple of the block size, but we must discard those when in SD_IO_RW_EXTENDED mode since SDIO block mode can be used under the hood even with data->blocks == 1. Those transfers are very rare, thus can be replaced by a bounce buffer without real performance loss. Fixes: 7412dee9f1fd ("mmc: meson-gx: replace WARN_ONCE with dev_warn_once about scatterlist size alignment in block mode") Cc: stable@vger.kernel.org Reported-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20210426175559.3110575-2-narmstrong@baylibre.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26mmc: meson-gx: make replace WARN_ONCE with dev_warn_once about scatterlist ↵Neil Armstrong1-1/+3
offset alignment commit cabb1bb60e88ccaaa122ba01862403cd44e8e8f8 upstream. Some drivers like ath10k can sometimg give an sg buffer with an offset whose alignment is not compatible with the Amlogic DMA descriptor engine requirements. Simply replace with dev_warn_once() to inform user this should be fixed to avoid degraded performance. This should be ultimately fixed in ath10k, but since it's only a performance issue the warning should be removed. Fixes: 79ed05e329c3 ("mmc: meson-gx: add support for descriptor chain mode") Cc: stable@vger.kernel.org Reported-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20210426175559.3110575-1-narmstrong@baylibre.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-26mmc: sdhci-pci-gli: increase 1.8V regulator waitDaniel Beer1-1/+6
commit a1149a6c06ee094a6e62886b0c0e8e66967a728a upstream. Inserting an SD-card on an Intel NUC10i3FNK4 (which contains a GL9755) results in the message: mmc0: 1.8V regulator output did not become stable Following this message, some cards work (sometimes), but most cards fail with EILSEQ. This behaviour is observed on Debian 10 running kernel 4.19.188, but also with 5.8.18 and 5.11.15. The driver currently waits 5ms after switching on the 1.8V regulator for it to become stable. Increasing this to 10ms gets rid of the warning about stability, but most cards still fail. Increasing it to 20ms gets some cards working (a 32GB Samsung micro SD works, a 128GB ADATA doesn't). At 50ms, the ADATA works most of the time, and at 100ms both cards work reliably. Signed-off-by: Daniel Beer <dlbeer@gmail.com> Acked-by: Ben Chuang <benchuanggli@gmail.com> Fixes: e51df6ce668a ("mmc: host: sdhci-pci: Add Genesys Logic GL975x support") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210424081652.GA16047@nyquist.nev Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-12mmc: sdhci-brcmstb: Remove CQE quirkAl Cooper1-1/+0
[ Upstream commit f0bdf98fab058efe7bf49732f70a0f26d1143154 ] Remove the CQHCI_QUIRK_SHORT_TXFR_DESC_SZ quirk because the latest chips have this fixed and earlier chips have other CQE problems that prevent the feature from being enabled. Signed-off-by: Al Cooper <alcooperx@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20210325192834.42955-1-alcooperx@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-12mmc: sdhci-pci: Add PCI IDs for Intel LKFAdrian Hunter2-0/+4
[ Upstream commit ee629112be8b4eff71d4d3d108a28bc7dc877e13 ] Add PCI IDs for Intel LKF eMMC and SD card host controllers. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20210322055356.24923-1-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-12mmc: sdhci-esdhc-imx: validate pinctrl before use itPeng Fan1-1/+1
[ Upstream commit f410ee0aa2df050a9505f5c261953e9b18e21206 ] When imx_data->pinctrl is not a valid pointer, pinctrl_lookup_state will trigger kernel panic. When we boot Dual OS on Jailhouse hypervisor, we let the 1st Linux to configure pinmux ready for the 2nd OS, so the 2nd OS not have pinctrl settings. Similar to this commit b62eee9f804e ("mmc: sdhci-esdhc-imx: no fail when no pinctrl available"). Reviewed-by: Bough Chen <haobo.chen@nxp.com> Reviewed-by: Alice Guo <alice.guo@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/1614222604-27066-6-git-send-email-peng.fan@oss.nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-12mmc: core: Fix hanging on I/O during system suspend for removable cardsUlf Hansson4-91/+59
commit 17a17bf50612e6048a9975450cf1bd30f93815b5 upstream. The mmc core uses a PM notifier to temporarily during system suspend, turn off the card detection mechanism for removal/insertion of (e)MMC/SD/SDIO cards. Additionally, the notifier may be used to remove an SDIO card entirely, if a corresponding SDIO functional driver don't have the system suspend/resume callbacks assigned. This behaviour has been around for a very long time. However, a recent bug report tells us there are problems with this approach. More precisely, when receiving the PM_SUSPEND_PREPARE notification, we may end up hanging on I/O to be completed, thus also preventing the system from getting suspended. In the end what happens, is that the cancel_delayed_work_sync() in mmc_pm_notify() ends up waiting for mmc_rescan() to complete - and since mmc_rescan() wants to claim the host, it needs to wait for the I/O to be completed first. Typically, this problem is triggered in Android, if there is ongoing I/O while the user decides to suspend, resume and then suspend the system again. This due to that after the resume, an mmc_rescan() work gets punted to the workqueue, which job is to verify that the card remains inserted after the system has resumed. To fix this problem, userspace needs to become frozen to suspend the I/O, prior to turning off the card detection mechanism. Therefore, let's drop the PM notifiers for mmc subsystem altogether and rely on the card detection to be turned off/on as a part of the system_freezable_wq, that we are already using. Moreover, to allow and SDIO card to be removed during system suspend, let's manage this from a ->prepare() callback, assigned at the mmc_host_class level. In this way, we can use the parent device (the mmc_host_class device), to remove the card device that is the child, in the device_prepare() phase. Reported-by: Kiwoong Kim <kwmad.kim@samsung.com> Cc: stable@vger.kernel.org # v4.5+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210310152900.149380-1-ulf.hansson@linaro.org Reviewed-by: Kiwoong Kim <kwmad.kim@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-12mmc: core: Set read only for SD cards with permanent write protect bitSeunghui Lee1-0/+6
commit 917a5336f2c27928be270226ab374ed0cbf3805d upstream. Some of SD cards sets permanent write protection bit in their CSD register, due to lifespan or internal problem. To avoid unnecessary I/O write operations, let's parse the bits in the CSD during initialization and mark the card as read only for this case. Signed-off-by: Seunghui Lee <sh043.lee@samsung.com> Link: https://lore.kernel.org/r/20210222083156.19158-1-sh043.lee@samsung.com Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-12mmc: core: Do a power cycle when the CMD11 failsDooHyun Hwang1-1/+1
commit 147186f531ae49c18b7a9091a2c40e83b3d95649 upstream. A CMD11 is sent to the SD/SDIO card to start the voltage switch procedure into 1.8V I/O. According to the SD spec a power cycle is needed of the card, if it turns out that the CMD11 fails. Let's fix this, to allow a retry of the initialization without the voltage switch, to succeed. Note that, whether it makes sense to also retry with the voltage switch after the power cycle is a bit more difficult to know. At this point, we treat it like the CMD11 isn't supported and therefore we skip it when retrying. Signed-off-by: DooHyun Hwang <dh0421.hwang@samsung.com> Link: https://lore.kernel.org/r/20210210045936.7809-1-dh0421.hwang@samsung.com Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-12mmc: block: Issue a cache flush only when it's enabledAvri Altman4-3/+21
commit 97fce126e279690105ee15be652b465fd96f9997 upstream. In command queueing mode, the cache isn't flushed via the mmc_flush_cache() function, but instead by issuing a CMDQ_TASK_MGMT (CMD48) with a FLUSH_CACHE opcode. In this path, we need to check if cache has been enabled, before deciding to flush the cache, along the lines of what's being done in mmc_flush_cache(). To fix this problem, let's add a new bus ops callback ->cache_enabled() and implement it for the mmc bus type. In this way, the mmc block device driver can call it to know whether cache flushing should be done. Fixes: 1e8e55b67030 (mmc: block: Add CQE support) Cc: stable@vger.kernel.org Reported-by: Brendan Peter <bpeter@lytx.com> Signed-off-by: Avri Altman <avri.altman@wdc.com> Tested-by: Brendan Peter <bpeter@lytx.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20210425060207.2591-2-avri.altman@wdc.com Link: https://lore.kernel.org/r/20210425060207.2591-3-avri.altman@wdc.com [Ulf: Squashed the two patches and made some minor updates] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-12mmc: block: Update ext_csd.cache_ctrl if it was writtenAvri Altman1-0/+12
commit aea0440ad023ab0662299326f941214b0d7480bd upstream. The cache function can be turned ON and OFF by writing to the CACHE_CTRL byte (EXT_CSD byte [33]). However, card->ext_csd.cache_ctrl is only set on init if cache size > 0. Fix that by explicitly setting ext_csd.cache_ctrl on ext-csd write. Signed-off-by: Avri Altman <avri.altman@wdc.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210420134641.57343-3-avri.altman@wdc.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-12mmc: sdhci-tegra: Add required callbacks to set/clear CQE_EN bitAniruddha Tvs Rao1-0/+32
commit 5ec6fa5a6dc5e42a4aa782f3a81d5f08b0fac1e6 upstream. CMD8 is not supported with Command Queue Enabled. Add required callback to clear CQE_EN and CQE_INTR fields in the host controller register before sending CMD8. Add corresponding callback in the CQHCI resume path to re-enable CQE_EN and CQE_INTR fields. Reported-by: Kamal Mostafa <kamal@canonical.com> Tested-by: Kamal Mostafa <kamal@canonical.com> Signed-off-by: Aniruddha Tvs Rao <anrao@nvidia.com> Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20210407094617.770495-1-jonathanh@nvidia.com Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-12mmc: sdhci-pci: Fix initialization of some SD cards for Intel BYT-based ↵Adrian Hunter1-0/+27
controllers commit 2970134b927834e9249659a70aac48e62dff804a upstream. Bus power may control card power, but the full reset done by SDHCI at initialization still may not reset the power, whereas a direct write to SDHCI_POWER_CONTROL can. That might be needed to initialize correctly, if the card was left powered on previously. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210331081752.23621-1-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-12mmc: sdhci: Check for reset prior to DMA address unmapPradeep P V K1-29/+31
commit 21e35e898aa9ef7781632959db8613a5380f2eae upstream. For data read commands, SDHC may initiate data transfers even before it completely process the command response. In case command itself fails, driver un-maps the memory associated with data transfer but this memory can still be accessed by SDHC for the already initiated data transfer. This scenario can lead to un-mapped memory access error. To avoid this scenario, reset SDHC (when command fails) prior to un-mapping memory. Resetting SDHC ensures that all in-flight data transfers are either aborted or completed. So we don't run into this scenario. Swap the reset, un-map steps sequence in sdhci_request_done(). Suggested-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Signed-off-by: Pradeep P V K <pragalla@codeaurora.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1614760331-43499-1-git-send-email-pragalla@qti.qualcomm.com Cc: stable@vger.kernel.org # v4.9+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-12mmc: uniphier-sd: Fix a resource leak in the remove functionChristophe JAILLET1-0/+1
commit e29c84857e2d51aa017ce04284b962742fb97d9e upstream. A 'tmio_mmc_host_free()' call is missing in the remove function, in order to balance a 'tmio_mmc_host_alloc()' call in the probe. This is done in the error handling path of the probe, but not in the remove function. Add the missing call. Fixes: 3fd784f745dd ("mmc: uniphier-sd: add UniPhier SD/eMMC controller driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20210220142953.918608-1-christophe.jaillet@wanadoo.fr Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-12mmc: uniphier-sd: Fix an error handling path in uniphier_sd_probe()Christophe JAILLET1-1/+3
commit b03aec1c1f337dfdae44cdb0645ecac34208ae0a upstream. A 'uniphier_sd_clk_enable()' call should be balanced by a corresponding 'uniphier_sd_clk_disable()' call. This is done in the remove function, but not in the error handling path of the probe. Add the missing call. Fixes: 3fd784f745dd ("mmc: uniphier-sd: add UniPhier SD/eMMC controller driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20210220142935.918554-1-christophe.jaillet@wanadoo.fr Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-19mmc: meson-gx: replace WARN_ONCE with dev_warn_once about scatterlist size ↵Neil Armstrong1-2/+3
alignment in block mode Since commit e085b51c74cc ("mmc: meson-gx: check for scatterlist size alignment in block mode"), support for SDIO SD_IO_RW_EXTENDED transferts are properly filtered but some driver like brcmfmac still gives a block sg buffer size not aligned with SDIO block, triggerring a WARN_ONCE() with scary stacktrace even if the transfer works fine but with possible degraded performances. Simply replace with dev_warn_once() to inform user this should be fixed to avoid degraded performance. This should be ultimately fixed in brcmfmac, but since it's only a performance issue the warning should be removed. Fixes: e085b51c74cc ("mmc: meson-gx: check for scatterlist size alignment in block mode") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20210416094347.2015896-1-narmstrong@baylibre.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-03-09mmc: cqhci: Fix random crash when remove mmc module/cardFrank Li1-6/+5
[ 6684.493350] Unable to handle kernel paging request at virtual address ffff800011c5b0f0 [ 6684.498531] mmc0: card 0001 removed [ 6684.501556] Mem abort info: [ 6684.509681] ESR = 0x96000047 [ 6684.512786] EC = 0x25: DABT (current EL), IL = 32 bits [ 6684.518394] SET = 0, FnV = 0 [ 6684.521707] EA = 0, S1PTW = 0 [ 6684.524998] Data abort info: [ 6684.528236] ISV = 0, ISS = 0x00000047 [ 6684.532986] CM = 0, WnR = 1 [ 6684.536129] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000081b22000 [ 6684.543923] [ffff800011c5b0f0] pgd=00000000bffff003, p4d=00000000bffff003, pud=00000000bfffe003, pmd=00000000900e1003, pte=0000000000000000 [ 6684.557915] Internal error: Oops: 96000047 [#1] PREEMPT SMP [ 6684.564240] Modules linked in: sdhci_esdhc_imx(-) sdhci_pltfm sdhci cqhci mmc_block mmc_core fsl_jr_uio caam_jr caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine rng_core authenc libdes crct10dif_ce flexcan can_dev caam error [last unloaded: mmc_core] [ 6684.587281] CPU: 0 PID: 79138 Comm: kworker/0:3H Not tainted 5.10.9-01410-g3ba33182767b-dirty #10 [ 6684.596160] Hardware name: Freescale i.MX8DXL EVK (DT) [ 6684.601320] Workqueue: kblockd blk_mq_run_work_fn [ 6684.606094] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--) [ 6684.612286] pc : cqhci_request+0x148/0x4e8 [cqhci] ^GMessage from syslogd@ at Thu Jan 1 01:51:24 1970 ...[ 6684.617085] lr : cqhci_request+0x314/0x4e8 [cqhci] [ 6684.626734] sp : ffff80001243b9f0 [ 6684.630049] x29: ffff80001243b9f0 x28: ffff00002c3dd000 [ 6684.635367] x27: 0000000000000001 x26: 0000000000000001 [ 6684.640690] x25: ffff00002c451000 x24: 000000000000000f [ 6684.646007] x23: ffff000017e71c80 x22: ffff00002c451000 [ 6684.651326] x21: ffff00002c0f3550 x20: ffff00002c0f3550 [ 6684.656651] x19: ffff000017d46880 x18: ffff00002cea1500 [ 6684.661977] x17: 0000000000000000 x16: 0000000000000000 [ 6684.667294] x15: 000001ee628e3ed1 x14: 0000000000000278 [ 6684.672610] x13: 0000000000000001 x12: 0000000000000001 [ 6684.677927] x11: 0000000000000000 x10: 0000000000000000 [ 6684.683243] x9 : 000000000000002b x8 : 0000000000001000 [ 6684.688560] x7 : 0000000000000010 x6 : ffff00002c0f3678 [ 6684.693886] x5 : 000000000000000f x4 : ffff800011c5b000 [ 6684.699211] x3 : 000000000002d988 x2 : 0000000000000008 [ 6684.704537] x1 : 00000000000000f0 x0 : 0002d9880008102f [ 6684.709854] Call trace: [ 6684.712313] cqhci_request+0x148/0x4e8 [cqhci] [ 6684.716803] mmc_cqe_start_req+0x58/0x68 [mmc_core] [ 6684.721698] mmc_blk_mq_issue_rq+0x460/0x810 [mmc_block] [ 6684.727018] mmc_mq_queue_rq+0x118/0x2b0 [mmc_block] The problem occurs when cqhci_request() get called after cqhci_disable() as it leads to access of allocated memory that has already been freed. Let's fix the problem by calling cqhci_disable() a bit later in the remove path. Signed-off-by: Frank Li <Frank.Li@nxp.com> Diagnosed-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20210303174248.542175-1-Frank.Li@nxp.com Fixes: f690f4409ddd ("mmc: mmc: Enable CQE's") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-03-09mmc: core: Fix partition switch time for eMMCAdrian Hunter1-4/+11
Avoid the following warning by always defining partition switch time: [ 3.209874] mmc1: unspecified timeout for CMD6 - use generic [ 3.222780] ------------[ cut here ]------------ [ 3.233363] WARNING: CPU: 1 PID: 111 at drivers/mmc/core/mmc_ops.c:575 __mmc_switch+0x200/0x204 Reported-by: Paul Fertser <fercerpav@gmail.com> Fixes: 1c447116d017 ("mmc: mmc: Fix partition switch timeout for some eMMCs") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/168bbfd6-0c5b-5ace-ab41-402e7937c46e@intel.com Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-03-09mmc: mmci: Add MMC_CAP_NEED_RSP_BUSY for the stm32 variantsYann Gautier1-1/+9
An issue has been observed on STM32MP157C-EV1 board, with an erase command with secure erase argument, ending up waiting for ~4 hours before timeout. The requested busy timeout from the mmc core ends up with 14784000ms (~4 hours), but the supported host->max_busy_timeout is 86767ms, which leads to that the core switch to use an R1 response in favor of the R1B and polls for busy with the host->card_busy() ops. In this case the polling doesn't work as expected, as we never detects that the card stops signaling busy, which leads to the following message: mmc1: Card stuck being busy! __mmc_poll_for_busy The problem boils done to that the stm32 variants can't use R1 responses in favor of R1B responses, as it leads to an internal state machine in the controller to get stuck. To continue to process requests, it would need to be reset. To fix this problem, let's set MMC_CAP_NEED_RSP_BUSY for the stm32 variant, which prevent the mmc core from switching to R1 responses. Additionally, let's cap the cmd->busy_timeout to the host->max_busy_timeout, thus rely on 86767ms to be sufficient (~66 seconds was need for this test case). Fixes: 94fe2580a2f3 ("mmc: core: Enable erase/discard/trim support for all mmc hosts") Signed-off-by: Yann Gautier <yann.gautier@foss.st.com> Link: https://lore.kernel.org/r/20210225145454.12780-1-yann.gautier@foss.st.com Cc: stable@vger.kernel.org [Ulf: Simplified the code and extended the commit message] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-02-27Merge branch 'stable/for-linus-5.12' of ↵Linus Torvalds1-7/+2
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb updates from Konrad Rzeszutek Wilk: "Two memory encryption related patches (SWIOTLB is enabled by default for AMD-SEV): - Add support for alignment so that NVME can properly work - Keep track of requested DMA buffers length, as underlaying hardware devices can trip SWIOTLB to bounce too much and crash the kernel And a tiny fix to use proper APIs in drivers" * 'stable/for-linus-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: swiotlb: Validate bounce size in the sync/unmap path nvme-pci: set min_align_mask swiotlb: respect min_align_mask swiotlb: don't modify orig_addr in swiotlb_tbl_sync_single swiotlb: refactor swiotlb_tbl_map_single swiotlb: clean up swiotlb_tbl_unmap_single swiotlb: factor out a nr_slots helper swiotlb: factor out an io_tlb_offset helper swiotlb: add a IO_TLB_SIZE define driver core: add a min_align_mask field to struct device_dma_parameters sdhci: stop poking into swiotlb internals
2021-02-23Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds1-3/+1
Pull ARM updates from Russell King: - Generalise byte swapping assembly - Update debug addresses for STI - Validate start of physical memory with DTB - Do not clear SCTLR.nTLSMD in decompressor - amba/locomo/sa1111 devices remove method return type is void - address markers for KASAN in page table dump * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9065/1: OABI compat: fix build when EPOLL is not enabled ARM: 9055/1: mailbox: arm_mhuv2: make remove callback return void amba: Make use of bus_type functions amba: Make the remove callback return void vfio: platform: simplify device removal amba: reorder functions amba: Fix resource leak for drivers without .remove ARM: 9054/1: arch/arm/mm/mmu.c: Remove duplicate header ARM: 9053/1: arm/mm/ptdump:Add address markers for KASAN regions ARM: 9051/1: vdso: remove unneded extra-y addition ARM: 9050/1: Kconfig: Select ARCH_HAVE_NMI_SAFE_CMPXCHG where possible ARM: 9049/1: locomo: make locomo bus's remove callback return void ARM: 9048/1: sa1111: make sa1111 bus's remove callback return void ARM: 9047/1: smp: remove unused variable ARM: 9046/1: decompressor: Do not clear SCTLR.nTLSMD for ARMv7+ cores ARM: 9045/1: uncompress: Validate start of physical memory against passed DTB ARM: 9042/1: debug: no uncompress debugging while semihosting ARM: 9041/1: sti LL_UART: add STiH418 SBC UART0 support ARM: 9040/1: use DEBUG_UART_PHYS and DEBUG_UART_VIRT for sti LL_UART ARM: 9039/1: assembler: generalize byte swapping macro into rev_l
2021-02-22Merge tag 'mmc-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds62-1363/+1746
Pull MMC updates from Ulf Hansson: "MMC core: - Add support for eMMC inline encryption - Add a helper function to parse DT properties for clock phases - Some improvements and cleanups for the mmc_test module MMC host: - android-goldfish: Remove driver - cqhci: Add support for eMMC inline encryption - dw_mmc-zx: Remove driver - meson-gx: Extend support for scatter-gather to allow SD_IO_RW_EXTENDED - mmci: Add support for probing bus voltage level translator - mtk-sd: Address race condition for request timeouts - sdhci_am654: Add Support for the variant on TI's AM64 SoC - sdhci-esdhc-imx: Prevent kernel panic at ->remove() - sdhci-iproc: Add ACPI bindings for the RPi to enable SD and WiFi on RPi4 - sdhci-msm: Add Inline Crypto Engine support - sdhci-msm: Use actual_clock to improve timeout calculations - sdhci-of-aspeed: Add Andrew Jeffery as maintainer - sdhci-of-aspeed: Extend clock support for the AST2600 variant - sdhci-pci-gli: Increase idle period for low power state for GL9763E - sdhci-pci-o2micro: Make tuning for SDR104 HW more robust - sdhci-sirf: Remove driver - sdhci-xenon: Add support for the AP807 variant - sunxi-mmc: Add support for the A100 variant - sunxi-mmc: Ensure host is suspended during system sleep - tmio: Add detection of data timeout errors - tmio/renesas_sdhi: Extend support for retuning - renesas_sdhi_internal_dmac: Add support for the ->pre|post_req() ops" * tag 'mmc-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (86 commits) mmc: sdhci-esdhc-imx: fix kernel panic when remove module mmc: host: Retire MMC_GOLDFISH mmc: cb710: Use new tasklet API mmc: sdhci-pci-o2micro: Bug fix for SDR104 HW tuning failure mmc: mmc_test: use erase_arg for mmc_erase command mmc: wbsd: Use new tasklet API mmc: via-sdmmc: Use new tasklet API mmc: uniphier-sd: Use new tasklet API mmc: tifm_sd: Use new tasklet API mmc: s3cmci: Use new tasklet API mmc: omap: Use new tasklet API mmc: dw_mmc: Use new tasklet API mmc: au1xmmc: Use new tasklet API mmc: atmel-mci: Use new tasklet API mmc: cavium: Replace spin_lock_irqsave with spin_lock in hard IRQ mmc: queue: Remove unused define mmc: core: Drop redundant bouncesz from struct mmc_card mmc: core: Drop redundant member in struct mmc host mmc: core: Use host instead of card argument to mmc_spi_send_csd() mmc: core: Exclude unnecessary header file ...
2021-02-21Merge tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-blockLinus Torvalds1-5/+5
Pull core block updates from Jens Axboe: "Another nice round of removing more code than what is added, mostly due to Christoph's relentless pursuit of tech debt removal/cleanups. This pull request contains: - Two series of BFQ improvements (Paolo, Jan, Jia) - Block iov_iter improvements (Pavel) - bsg error path fix (Pan) - blk-mq scheduler improvements (Jan) - -EBUSY discard fix (Jan) - bvec allocation improvements (Ming, Christoph) - bio allocation and init improvements (Christoph) - Store bdev pointer in bio instead of gendisk + partno (Christoph) - Block trace point cleanups (Christoph) - hard read-only vs read-only split (Christoph) - Block based swap cleanups (Christoph) - Zoned write granularity support (Damien) - Various fixes/tweaks (Chunguang, Guoqing, Lei, Lukas, Huhai)" * tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-block: (104 commits) mm: simplify swapdev_block sd_zbc: clear zone resources for non-zoned case block: introduce blk_queue_clear_zone_settings() zonefs: use zone write granularity as block size block: introduce zone_write_granularity limit block: use blk_queue_set_zoned in add_partition() nullb: use blk_queue_set_zoned() to setup zoned devices nvme: cleanup zone information initialization block: document zone_append_max_bytes attribute block: use bi_max_vecs to find the bvec pool md/raid10: remove dead code in reshape_request block: mark the bio as cloned in bio_iov_bvec_set block: set BIO_NO_PAGE_REF in bio_iov_bvec_set block: remove a layer of indentation in bio_iov_iter_get_pages block: turn the nr_iovecs argument to bio_alloc* into an unsigned short block: remove the 1 and 4 vec bvec_slabs entries block: streamline bvec_alloc block: factor out a bvec_alloc_gfp helper block: move struct biovec_slab to bio.c block: reuse BIO_INLINE_VECS for integrity bvecs ...
2021-02-20sdhci: stop poking into swiotlb internalsChristoph Hellwig1-7/+2
Use the proper API to query the max mapping size instead of guessing it based on swiotlb internals. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2021-02-15mmc: sdhci-esdhc-imx: fix kernel panic when remove moduleFrank Li1-1/+2
In sdhci_esdhc_imx_remove() the SDHCI_INT_STATUS in read. Under some circumstances, this may be done while the device is runtime suspended, triggering the below splat. Fix the problem by adding a pm_runtime_get_sync(), before reading the register, which will turn on clocks etc making the device accessible again. [ 1811.323148] mmc1: card aaaa removed [ 1811.347483] Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP [ 1811.354988] Modules linked in: sdhci_esdhc_imx(-) sdhci_pltfm sdhci cqhci mmc_block mmc_core [last unloaded: mmc_core] [ 1811.365726] CPU: 0 PID: 3464 Comm: rmmod Not tainted 5.10.1-sd-99871-g53835a2e8186 #5 [ 1811.373559] Hardware name: Freescale i.MX8DXL EVK (DT) [ 1811.378705] pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--) [ 1811.384723] pc : sdhci_esdhc_imx_remove+0x28/0x15c [sdhci_esdhc_imx] [ 1811.391090] lr : platform_drv_remove+0x2c/0x50 [ 1811.395536] sp : ffff800012c7bcb0 [ 1811.398855] x29: ffff800012c7bcb0 x28: ffff00002c72b900 [ 1811.404181] x27: 0000000000000000 x26: 0000000000000000 [ 1811.409497] x25: 0000000000000000 x24: 0000000000000000 [ 1811.414814] x23: ffff0000042b3890 x22: ffff800009127120 [ 1811.420131] x21: ffff00002c4c9580 x20: ffff0000042d0810 [ 1811.425456] x19: ffff0000042d0800 x18: 0000000000000020 [ 1811.430773] x17: 0000000000000000 x16: 0000000000000000 [ 1811.436089] x15: 0000000000000004 x14: ffff000004019c10 [ 1811.441406] x13: 0000000000000000 x12: 0000000000000020 [ 1811.446723] x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f [ 1811.452040] x9 : fefefeff6364626d x8 : 7f7f7f7f7f7f7f7f [ 1811.457356] x7 : 78725e6473607372 x6 : 0000000080808080 [ 1811.462673] x5 : 0000000000000000 x4 : 0000000000000000 [ 1811.467990] x3 : ffff800011ac1cb0 x2 : 0000000000000000 [ 1811.473307] x1 : ffff8000091214d4 x0 : ffff8000133a0030 [ 1811.478624] Call trace: [ 1811.481081] sdhci_esdhc_imx_remove+0x28/0x15c [sdhci_esdhc_imx] [ 1811.487098] platform_drv_remove+0x2c/0x50 [ 1811.491198] __device_release_driver+0x188/0x230 [ 1811.495818] driver_detach+0xc0/0x14c [ 1811.499487] bus_remove_driver+0x5c/0xb0 [ 1811.503413] driver_unregister+0x30/0x60 [ 1811.507341] platform_driver_unregister+0x14/0x20 [ 1811.512048] sdhci_esdhc_imx_driver_exit+0x1c/0x3a8 [sdhci_esdhc_imx] [ 1811.518495] __arm64_sys_delete_module+0x19c/0x230 [ 1811.523291] el0_svc_common.constprop.0+0x78/0x1a0 [ 1811.528086] do_el0_svc+0x24/0x90 [ 1811.531405] el0_svc+0x14/0x20 [ 1811.534461] el0_sync_handler+0x1a4/0x1b0 [ 1811.538474] el0_sync+0x174/0x180 [ 1811.541801] Code: a9025bf5 f9403e95 f9400ea0 9100c000 (b9400000) [ 1811.547902] ---[ end trace 3fb1a3bd48ff7be5 ]--- Signed-off-by: Frank Li <Frank.Li@nxp.com> Cc: stable@vger.kernel.org # v4.0+ Link: https://lore.kernel.org/r/20210210181933.29263-1-Frank.Li@nxp.com [Ulf: Clarified the commit message a bit] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-02-15mmc: host: Retire MMC_GOLDFISHRoman Kiryanov3-553/+0
Android Studio Emulator no longer uses this driver, so let's drop it. Signed-off-by: Roman Kiryanov <rkir@google.com> Link: https://lore.kernel.org/r/20210209190850.16647-1-rkir@google.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-02-15mmc: cb710: Use new tasklet APIEmil Renner Berthing1-6/+6
This converts the driver to use the new tasklet API introduced in commit 12cc923f1ccc ("tasklet: Introduce new initialization API") Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Acked-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lore.kernel.org/r/20210208134551.39696-1-kernel@esmil.dk Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-02-15mmc: sdhci-pci-o2micro: Bug fix for SDR104 HW tuning failureShirley Her1-0/+20
Force chip enter L0 power state during SDR104 HW tuning to avoid tuning failure Signed-off-by: Shirley Her <shirley.her@bayhubtech.com> Link: https://lore.kernel.org/r/20210206014051.3418-1-shirley.her@bayhubtech.com Fixes: 7b7d897e8898 ("mmc: sdhci-pci-o2micro: Add HW tuning for SDR104 mode") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-02-12mmc: mmc_test: use erase_arg for mmc_erase commandYann Gautier1-1/+1
Since [1], the erase argument for mmc_erase() function is saved in erase_arg field of card structure. It is preferable to use it instead of hard-coded MMC_SECURE_ERASE_ARG, which from eMMC 4.51 spec is not recommended: "6.6.16 Secure Erase NOTE Secure Erase is included for backwards compatibility. New system level implementations (based on v4.51 devices and beyond) should use Erase combined with Sanitize instead of secure erase." On STM32MP157C-EV1 board, embedding a THGBMDG5D1LBAIL eMMC, using MMC_ERASE command with MMC_SECURE_ERASE_ARG may stuck the STM32 SDMMC IP, if test 37 or test 38 are launched just after a write test, e.g. test 36. Using the default MMC_ERASE argument from framework with erase_arg, which default in our case to MMC_DISCARD_ARG does no more trig the issue. [1] commit 01904ff77676 ("mmc: core: Calculate the discard arg only once") Signed-off-by: Yann Gautier <yann.gautier@foss.st.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20210209145214.10518-1-yann.gautier@foss.st.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-02-08mmc: wbsd: Use new tasklet APIEmil Renner Berthing1-20/+15
This converts the driver to use the new tasklet API introduced in commit 12cc923f1ccc ("tasklet: Introduce new initialization API") Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Link: https://lore.kernel.org/r/20210204151847.91353-10-kernel@esmil.dk Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-02-08mmc: via-sdmmc: Use new tasklet APIEmil Renner Berthing1-6/+3
This converts the driver to use the new tasklet API introduced in commit 12cc923f1ccc ("tasklet: Introduce new initialization API") Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Link: https://lore.kernel.org/r/20210204151847.91353-9-kernel@esmil.dk Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-02-08mmc: uniphier-sd: Use new tasklet APIEmil Renner Berthing1-8/+6
This converts the driver to use the new tasklet API introduced in commit 12cc923f1ccc ("tasklet: Introduce new initialization API") Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Link: https://lore.kernel.org/r/20210204151847.91353-8-kernel@esmil.dk Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-02-08mmc: tifm_sd: Use new tasklet APIEmil Renner Berthing1-4/+3
This converts the driver to use the new tasklet API introduced in commit 12cc923f1ccc ("tasklet: Introduce new initialization API") Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Link: https://lore.kernel.org/r/20210204151847.91353-7-kernel@esmil.dk Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-02-08mmc: s3cmci: Use new tasklet APIEmil Renner Berthing1-3/+3
This converts the driver to use the new tasklet API introduced in commit 12cc923f1ccc ("tasklet: Introduce new initialization API") Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Link: https://lore.kernel.org/r/20210204151847.91353-6-kernel@esmil.dk Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-02-08mmc: omap: Use new tasklet APIEmil Renner Berthing1-4/+3
This converts the driver to use the new tasklet API introduced in commit 12cc923f1ccc ("tasklet: Introduce new initialization API") Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Link: https://lore.kernel.org/r/20210204151847.91353-5-kernel@esmil.dk Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-02-08mmc: dw_mmc: Use new tasklet APIEmil Renner Berthing1-3/+3
This converts the driver to use the new tasklet API introduced in commit 12cc923f1ccc ("tasklet: Introduce new initialization API") Signed-off-by: Emil Renner Berthing <kernel@esmil.dk> Link: https://lore.kernel.org/r/20210204151847.91353-4-kernel@esmil.dk Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-23 04:48:08 +0300