summaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)AuthorFilesLines
2011-02-28dt: Eliminate of_platform_{,un}register_driverGrant Likely1-6/+9
Final step to eliminate of_platform_bus_type. They're all just platform drivers now. v2: fix type in pasemi_nand.c (thanks to Stephen Rothwell) Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-02-23ARM: amba: make probe() functions take const id tablesRussell King1-1/+2
Make Primecell driver probe functions take a const pointer to their ID tables. Drivers should never modify their ID tables in their probe handler. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-23Merge branch 'devicetree/next' into spi/nextGrant Likely1-4/+0
To pick up removal of #ifdef around .of_match_table
2011-02-22OMAP: hsmmc: Enable MMC4 and MMC5 on OMAP4 platformsKishore Kadiyala1-4/+20
OMAP4 supports up to 5 MMC controllers, but only 3 of these were initialized. MMC5 is used by wl12xx chip. So initialize MMC4 and MMC5. Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by: Panduranga Mallireddy <panduranga_mallireddy@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-17tiocmset: kill the file pointer argumentAlan Cox1-1/+1
Doing tiocmget was such fun we should do tiocmset as well for the same reasons Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-17tiocmget: kill off the passing of the struct fileAlan Cox1-1/+1
We don't actually need this and it causes problems for internal use of this functionality. Currently there is a single use of the FILE * pointer. That is the serial core which uses it to check tty_hung_up_p. However if that is true then IO_ERROR is also already set so the check may be removed. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-16Merge branches 'devel-cleanup', 'devel-board', 'devel-early-init' and ↵Tony Lindgren1-1/+1
'devel-ti816x' into omap-for-linus
2011-02-04Merge commit 'v2.6.38-rc3' into devicetree/nextGrant Likely7-121/+89
2011-02-04ARM: mmci: add dmaengine-based DMA supportRussell King2-8/+287
Based on a patch from Linus Walleij. Add dmaengine based support for DMA to the MMCI driver, using the Primecell DMA engine interface. The changes over Linus' driver are: - rename txsize_threshold to dmasize_threshold, as this reflects the purpose more. - use 'mmci_dma_' as the function prefix rather than 'dma_mmci_'. - clean up requesting of dma channels. - don't release a single channel twice when it's shared between tx and rx. - get rid of 'dma_enable' bool - instead check whether the channel is NULL. - detect incomplete DMA at the end of a transfer. Some DMA controllers (eg, PL08x) are unable to be configured for scatter DMA and also listen to all four DMA request signals [BREQ,SREQ,LBREQ,LSREQ] from the MMCI. They can do one or other but not both. As MMCI uses LBREQ/LSREQ for the final burst/words, PL08x does not transfer the last few words. - map and unmap DMA buffers using the DMA engine struct device, not the MMCI struct device - the DMA engine is doing the DMA transfer, not us. - avoid double-unmapping of the DMA buffers on MMCI data errors. - don't check for negative values from the dmaengine tx submission function - Dan says this must never fail. - use new dmaengine helper functions rather than using the ugly function pointers directly. - allow DMA code to be fully optimized away using dma_inprogress() which is defined to constant 0 if DMA engine support is disabled. - request maximum segment size from the DMA engine struct device and set this appropriately. - removed checking of buffer alignment - the DMA engine should deal with its own restrictions on buffer alignment, not the individual DMA engine users. - removed setting DMAREQCTL - this confuses some DMA controllers as it causes LBREQ to be asserted for the last seven transfers, rather than six SREQ and one LSREQ. - removed burst setting - the DMA controller should not burst past the transfer size required to complete the DMA operation. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-04ARM: mmci: no need for separate host->data_xferedRussell King2-8/+3
We don't need to store the number of bytes transferred in our host structure - we can store this directly in data->bytes_xfered. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-04ARM: mmci: avoid unnecessary switch to data available PIO interruptsRussell King1-6/+7
We don't need to switch to data available interrupts if there's at least half a FIFO depth worth of data remaining, as we'll still get the FIFO half full interrupt. Keep this interrupt masked off until we have less than half the FIFO depth worth of data remaining. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-04ARM: mmci: no need to call flush_dcache_page() with sg_miter APIRussell King1-19/+0
The sg_miter API provides the required cache maintainence, so we don't need to do that ourselves. Remove the unnecessary additional cache maintainence. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-04ARM: mmci: avoid reporting too many completed bytes on fifo overrunRussell King1-6/+18
The data counter counts the number of bytes transferred on the MMC bus. When a FIFO overrun occurs, we will not have transferred a FIFOs-worth of data to memory, and so the data counter will be a FIFOs-worth ahead. If this occurs on a block boundary, we will report one too many sectors as successful. Fix this. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-31ARM: mmci: round down the bytes transferred on errorRussell King1-3/+4
We should not report incomplete blocks on error. Return the number of bytes successfully transferred, rounded down to the nearest block. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-31ARM: mmci: complete the transaction on errorRussell King1-1/+1
When we encounter an error, make sure we complete the transaction otherwise we'll leave the request dangling. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-28omap: Start using CONFIG_SOC_OMAPTony Lindgren1-1/+1
We want to have just CONFIG_ARCH_OMAP2, 3 and 4. The rest are nowadays just subcategories of these. Search and replace the following: ARCH_OMAP2420 SOC_OMAP2420 ARCH_OMAP2430 SOC_OMAP2430 ARCH_OMAP3430 SOC_OMAP3430 No functional changes. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Thomas Weber <weber@corscience.de> Acked-by: Sourav Poddar <sourav.poddar@ti.com>
2011-01-28ARM: 6642/1: mmci: calculate remaining bytes at error correctlyLinus Walleij1-2/+2
The MMCIDATACNT register contain the number of byte left at error not the number of words, so loose the << 2 thing. Further if CRC fails on the first block, we may end up with a negative number of transferred bytes which is not good, and the formula was in wrong order. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-26mmc: bfin_sdh: fix alloc size for private dataSonic Zhang1-1/+1
The bfin_sdh driver allocates the wrong size for the private data in the mmc_host. The first parameter of mmc_alloc_host should be the size of the local driver struct rather than the common mmc_host. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Cc: <stable@kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-26mmc: sdhci-s3c: add platform_8bit_width() hookJaehoon Chung1-0/+36
We have 8-bit width support but is not a v3 controller. So we need platform_8bit_width() to support 8-bit buswidth. Also we need MMC_CAP_8_BIT_DATA, so we add it in platdata. This gets 8-bit support working again on s3c, after we previously disabled 8-bit by default on non-v3 controllers. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-26mmc: jz4740: don't treat NULL clk as an errorJamie Iles1-2/+3
clk_get() returns a struct clk cookie to the driver and some platforms may return NULL if they only support a single clock. clk_get() has only failed if it returns a ERR_PTR() encoded pointer. Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-26mmc: mmci: don't read command response when invalidRussell King - ARM Linux1-5/+5
Don't read the command response from the registers when either the command timed out (because there was no response from the card) or the checksum on the response was invalid. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-26mmc: ushc: Remove duplicate include of usb.hJesper Juhl1-1/+0
Including usb.h once is enough in drivers/mmc/host/ushc.c This removes the duplicate. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-26Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds2-82/+21
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm: ALSA: AACI: fix timeout duration ALSA: AACI: fix timeout condition checking ARM: 6636/1: ep93xx: default multiplexed gpio ports to gpio mode ARM: 6637/1: Make the argument to virt_to_phys() "const volatile" ARM: twd: ensure timer reload is reprogrammed on entry to periodic mode ARM: 6635/2: Configure reference clock for Versatile Express timers ARM: versatile: name configuration options after actual board names ARM: realview: name configuration options after actual board names ARM: realview,vexpress: fix section mismatch warning for pen_release ARM: 6632/3: mmci: stop using the blockend interrupts
2011-01-24ARM: 6632/3: mmci: stop using the blockend interruptsLinus Walleij2-82/+21
Implement a suggestion from Russell to drop the use of blockend interrupts altogether and instead rely on the data counter. Tested with error-free cards on U300, U8500 and RealView PB1176. Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-22mmc: msm_sdcc: Add gpio handling function to driverSahitya Tummala2-1/+40
Configure SDCC GPIOs when the host is powered up or powered off. Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
2011-01-22drivers: mmc: msm: remove clock disable in probeDaniel Walker1-3/+0
The probe function adds the MMC host which can start accepting request immediately. There is an assumption here that no requests happen immediatly, but it's not always the case. This assumption can causes a BUG() when the clocks are disabled. The fix is to just remove the clock disable in the probe function. Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2011-01-22mmc: msm: fix dma usage not to use internal APIsDaniel Walker1-27/+22
Remove parts of this driver which use internal API calls. This replaces the calls as suggested by Russell King. Cc: Russell King - ARM Linux <linux@arm.linux.org.uk> Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2011-01-21driver-core: remove conditionals around devicetree pointersGrant Likely1-4/+0
Having conditional around the of_match_table and the of_node pointers turns out to make driver code use ugly #ifdef blocks. Drop the conditionals and remove the #ifdef blocks from the affected drivers. Also tidy up minor whitespace issues within the same hunks. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-14mmc: sdhci-of: fix build on non-powerpc platformsRob Herring1-0/+9
Explicitly include err.h, of_address.h and of_irq.h. Make use of machine_is() conditional on PPC. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-01-13Merge branch 'for-next' of ↵Linus Torvalds4-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits) Documentation/trace/events.txt: Remove obsolete sched_signal_send. writeback: fix global_dirty_limits comment runtime -> real-time ppc: fix comment typo singal -> signal drivers: fix comment typo diable -> disable. m68k: fix comment typo diable -> disable. wireless: comment typo fix diable -> disable. media: comment typo fix diable -> disable. remove doc for obsolete dynamic-printk kernel-parameter remove extraneous 'is' from Documentation/iostats.txt Fix spelling milisec -> ms in snd_ps3 module parameter description Fix spelling mistakes in comments Revert conflicting V4L changes i7core_edac: fix typos in comments mm/rmap.c: fix comment sound, ca0106: Fix assignment to 'channel'. hrtimer: fix a typo in comment init/Kconfig: fix typo anon_inodes: fix wrong function name in comment fix comment typos concerning "consistent" poll: fix a typo in comment ... Fix up trivial conflicts in: - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c) - fs/ext4/ext4.h Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.
2011-01-11Merge branch 'for-linus' of ↵Linus Torvalds30-490/+3790
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (39 commits) mmc: davinci: add support for SDIO irq handling mmc: fix division by zero in MMC core mmc: tmio_mmc: fix CMD irq handling mmc: tmio_mmc: handle missing HW interrupts mfd: sh_mobile_sdhi: activate SDIO IRQ for tmio_mmc mmc: tmio_mmc: implement SDIO IRQ support mfd: sdhi: require the tmio-mmc driver to bounce unaligned buffers mmc: tmio_mmc: silence compiler warnings mmc: tmio_mmc: implement a bounce buffer for unaligned DMA mmc: tmio_mmc: merge the private header into the driver mmc: tmio_mmc: fix PIO fallback on DMA descriptor allocation failure mmc: tmio_mmc: allow multi-element scatter-gather lists mmc: Register debugfs dir before calling card probe function. mmc: MMC_BLOCK_MINORS should depend on MMC_BLOCK. mmc: Explain why we make adjacent mmc_bus_{put,get} calls during rescan. mmc: Fix sd/sdio/mmc initialization frequency retries mmc: fix mmc_set_bus_width_ddr() call without bus-width-test cap mmc: dw_mmc: Add Synopsys DesignWare mmc host driver. mmc: add sdhci-tegra driver for Tegra SoCs mmc: sdhci: add quirk for max len ADMA descriptors ...
2011-01-10Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds2-3/+5
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: (29 commits) of/flattree: forward declare struct device_node in of_fdt.h ipmi: explicitly include of_address.h and of_irq.h sparc: explicitly cast negative phandle checks to s32 powerpc/405: Fix missing #{address,size}-cells in i2c node powerpc/5200: dts: refactor dts files powerpc/5200: dts: Change combatible strings on localbus powerpc/5200: dts: remove unused properties powerpc/5200: dts: rename nodes to prepare for refactoring dts files of/flattree: Update dtc to current mainline. of/device: Don't register disabled devices powerpc/dts: fix syntax bugs in bluestone.dts of: Fixes for OF probing on little endian systems of: make drivers depend on CONFIG_OF instead of CONFIG_PPC_OF of/flattree: Add of_flat_dt_match() helper function of_serial: explicitly include of_irq.h of/flattree: Refactor unflatten_device_tree and add fdt_unflatten_tree of/flattree: Reorder unflatten_dt_node of/flattree: Refactor unflatten_dt_node of/flattree: Add non-boottime device tree functions of/flattree: Add Kconfig for EARLY_FLATTREE ... Fix up trivial conflict in arch/sparc/prom/tree_32.c as per Grant.
2011-01-10mmc: davinci: add support for SDIO irq handlingAlagu Sankar1-5/+73
This patch adds support for handling SDIO interrupt on DaVinci MMC/SD controller. The patch has been tested on DM355 and DA850 EVMs with Marvell Libertas based SDIO wireless LAN card. Signed-off-by: Alagu Sankar <alagusankar@embwise.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-09mmc: fix division by zero in MMC coreLinus Walleij1-2/+3
The card is not always clocked and the clock frequency zero is perfectly legal, thus this code in mmc_set_data_timeout() may cause a division by zero. It will be triggered more often if you're using software clock gating but can be triggered under other conditions too. Reported-by: Pierre Tardy <tardyp@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Chris Ball <cjb@laptop.org> Cc: <stable@kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-09mmc: tmio_mmc: fix CMD irq handlingArnd Hannemann1-2/+4
With current code card insert/eject interrupts will acknowledge outstanding commands. Normally this seems to be no problem, however if the hardware gets stuck and no interrupts for CMD_TIMEOUT or CMD_RESPEND are generated, then inserting and ejecting cards will falsely acknowledge outstanding commands from the core. This patch changes the behavior so that CMDs are only acked, if CMD_TIMEOUT or CMD_RESPEND is received. Signed-off-by: Arnd Hannemann <arnd@arndnet.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-09mmc: tmio_mmc: handle missing HW interruptsArnd Hannemann1-4/+86
When doing excessive hotplug, e.g., repeated insert/eject operations, the hardware may get confused to a point where no CMDTIMEOUT/CMDRESPEND interrupts are generated any more. As a result requests get stuck, e.g.: [ 360.351562] INFO: task kworker/u:0:5 blocked for more than 120 seconds. [ 360.351562] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 360.359375] kworker/u:0 D c020c2b4 0 5 2 0x00000000 [ 360.367187] Backtrace: [ 360.367187] [<c020bfb0>] (schedule+0x0/0x340) from [<c020c480>] (schedule_timeout+0x20/0x190) [ 360.375000] r8:c702fd70 r7:00000002 r6:c702e000 r5:c702fdc4 r4:7fffffff [ 360.375000] r3:c701e040 [ 360.382812] [<c020c460>] (schedule_timeout+0x0/0x190) from [<c020be78>] (wait_for_common+0xc4/0x150) [ 360.390625] r6:c702e000 r5:c702fdc4 r4:7fffffff [ 360.390625] [<c020bdb4>] (wait_for_common+0x0/0x150) from [<c020bfac>] (wait_for_completion+0x18/0x1c) [ 360.398437] [<c020bf94>] (wait_for_completion+0x0/0x1c) from [<c0185590>] (mmc_wait_for_req+0x214/0x234) [ 360.406250] [<c018537c>] (mmc_wait_for_req+0x0/0x234) from [<c01889d0>] (mmc_sd_switch+0xfc/0x114) [ 360.414062] r7:c702fe4c r6:c702fe20 r5:c7179800 r4:00fffff0 [ 360.421875] [<c01888d4>] (mmc_sd_switch+0x0/0x114) from [<c0187f70>] (mmc_sd_setup_card+0x260/0x384) [ 360.429687] [<c0187d10>] (mmc_sd_setup_card+0x0/0x384) from [<c01885e0>] (mmc_sd_init_card+0x13c/0x1e0) [ 360.437500] [<c01884a4>] (mmc_sd_init_card+0x0/0x1e0) from [<c01887a8>] (mmc_attach_sd+0x124/0x1a8) [ 360.445312] r8:c02db404 r7:ffffff92 r6:c702ff34 r5:c6007da8 r4:c6007c00 [ 360.453125] [<c0188684>] (mmc_attach_sd+0x0/0x1a8) from [<c0185140>] (mmc_rescan+0x248/0x2f0) [ 360.460937] r5:c6007da8 r4:c6007c00 [ 360.468750] [<c0184ef8>] (mmc_rescan+0x0/0x2f0) from [<c00467f0>] (process_one_work+0x1ec/0x318) [ 360.476562] r7:c6007da8 r6:00000000 r5:c710ec00 r4:c701bde0 [ 360.484375] [<c0046604>] (process_one_work+0x0/0x318) from [<c0047fb0>] (worker_thread+0x1b0/0x2cc) [ 360.492187] [<c0047e00>] (worker_thread+0x0/0x2cc) from [<c004b338>] (kthread+0x8c/0x94) [ 360.500000] [<c004b2ac>] (kthread+0x0/0x94) from [<c0037fc4>] (do_exit+0x0/0x590) [ 360.507812] r7:00000013 r6:c0037fc4 r5:c004b2ac r4:c7021f00 This patch addresses this problem by introducing timeouts for outstanding interrupts. If a hardware interrupt is missing, a soft reset will be performed to bring the hardware back to a working state. Tested with the SDHI hardware block in sh7372 / AP4EVB. Signed-off-by: Arnd Hannemann <arnd@arndnet.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-09mmc: tmio_mmc: implement SDIO IRQ supportArnd Hannemann1-0/+79
This patch implements SDIO IRQ support for mfds which announce the TMIO_MMC_SDIO_IRQ flag for tmio_mmc. If MMC_CAP_SDIO_IRQ is also set SDIO IRQ signalling is activated. Tested with a b43-based wireless SDIO card and sh_mobile_sdhi. Signed-off-by: Arnd Hannemann <arnd@arndnet.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-09mmc: tmio_mmc: silence compiler warningsArnd Hannemann1-2/+6
with "mmc: tmio: implement a bounce buffer for unaligned DMA" gcc generates the following warnings: drivers/mmc/host/tmio_mmc.c:654:6: warning: 'ret' may be used uninitialized in this function drivers/mmc/host/tmio_mmc.c:730:6: warning: 'ret' may be used uninitialized in this function This patch fixes these by setting ret to -EINVAL in the affected code paths. Signed-off-by: Arnd Hannemann <arnd@arndnet.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-09mmc: tmio_mmc: implement a bounce buffer for unaligned DMAGuennadi Liakhovetski1-6/+83
For example, with SDIO WLAN cards, some transfers happen with buffers at odd addresses, whereas the SH-Mobile DMA engine requires even addresses for SDHI. This patch extends the tmio driver with a bounce buffer, that is used for single entry scatter-gather lists both for sending and receiving. If we ever encounter unaligned transfers with multi-element sg lists, this patch will have to be extended. For now it just falls back to PIO in this and other unsupported cases. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-09mmc: tmio_mmc: merge the private header into the driverGuennadi Liakhovetski2-231/+210
drivers/mmc/host/tmio_mmc.h is only used by drivers/mmc/host/tmio_mmc.c, this needlessly complicates source-code handling. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-09mmc: tmio_mmc: fix PIO fallback on DMA descriptor allocation failureGuennadi Liakhovetski2-46/+25
The easiest way to fall back to PIO, when a DMA descriptor allocation fails is to disable DMA on the controller but continue with the current request in PIO mode. This way tmio_mmc_start_dma() can become void, since it cannot be failing any more. The current version is also broken: it is testing a wrong pointer and thus failing to recognise, that a descriptor allocation wasn't successful. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-09mmc: tmio_mmc: allow multi-element scatter-gather listsGuennadi Liakhovetski1-2/+7
The driver is capable of handling multi-element sg lists in both PIO and DMA modes. In DMA mode this also allows to use the DMA sg capability more efficiently and almost doubles the throughput. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-09mmc: Register debugfs dir before calling card probe function.Viresh Kumar1-4/+4
This way, the probe function may register debugfs files if it wants to. This fixes a bug with mmc_test where mmc_test_register_file_test() is called before the card's debugfs dir exists, and so it fails. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Tested-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-09mmc: MMC_BLOCK_MINORS should depend on MMC_BLOCK.Chris Ball1-0/+1
Signed-off-by: Chris Ball <cjb@laptop.org> Tested-by: Chris Ball <cjb@laptop.org> Acked-by: Olof Johansson <olof@lixom.net>
2011-01-09mmc: Explain why we make adjacent mmc_bus_{put,get} calls during rescan.Chris Ball1-2/+4
Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-09mmc: Fix sd/sdio/mmc initialization frequency retriesAndy Ross5-99/+68
Rewrite and clean up mmc_rescan() to properly retry frequencies lower than 400kHz. Failures can happen both in sd_send_* calls and mmc_attach_*. Break out "mmc_rescan_try_freq" from the frequency selection loop. Symmetrize claim/release logic in mmc_attach_* API, and move the sd_send_* calls there to make mmc_rescan easier to read. Signed-off-by: Andy Ross <andy.ross@windriver.com> Reviewed-and-Tested-by: Hein Tibosch <hein_tibosch@yahoo.es> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-09mmc: fix mmc_set_bus_width_ddr() call without bus-width-test capTakashi Iwai1-2/+2
With the bus-width test patch, mmc_set_bus_width*() isn't called properly when the driver doesn't set MMC_CAP_BUS_WIDTH and no DDR mode. This patch fixes the regression by moving the call up before the cap test. Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-09mmc: dw_mmc: Add Synopsys DesignWare mmc host driver.Will Newton4-0/+1981
This adds the mmc host driver for the Synopsys DesignWare mmc host controller, found in a number of embedded SoC designs. Signed-off-by: Will Newton <will.newton@imgtec.com> Reviewed-by: Matt Fleming <matt@console-pimps.org> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-09mmc: add sdhci-tegra driver for Tegra SoCsOlof Johansson5-0/+272
SDHCI driver for Tegra. This driver plugs in as a new variant of sdhci-pltfm, using the platform data structure passed in to specify the GPIOs to use for card detect, write protect and card power enablement. Original driver (of which only the header file is left): Signed-off-by: Yvonne Yip <y@palm.com> The rest, which has been rewritten by now: Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-09mmc: sdhci: add quirk for max len ADMA descriptorsOlof Johansson1-3/+7
Some controllers misparse segment length 0 as being 0, not 65536. Add a quirk to deal with it. Signed-off-by: Olof Johansson <olof@lixom.net> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-30 17:55:46 +0300