summaryrefslogtreecommitdiff
path: root/drivers/mmc/core/pwrseq.h
AgeCommit message (Collapse)AuthorFilesLines
2017-06-20mmc: pwrseq: Add reset callback to the struct mmc_pwrseq_opsUlf Hansson1-0/+3
The ->reset() callback is needed to implement a better support for eMMC HW reset. The following changes will take advantage of the new callback. Suggested-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
2017-02-13mmc: core: First step in cleaning up private mmc header filesUlf Hansson1-1/+5
This is the first step in cleaning up the private mmc header files. In this change we makes sure each header file builds standalone, as that helps to resolve dependencies. While changing this, it also seems reasonable to stop including other headers from inside a header itself which it don't depend upon. Additionally, in some cases such dependencies are better resolved by forward declaring the needed struct. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
2016-05-02mmc: pwrseq: convert to proper platform deviceSrinivas Kandagatla1-6/+13
simple-pwrseq and emmc-pwrseq drivers rely on platform_device structure from of_find_device_by_node(), this works mostly. But, as there is no driver associated with this devices, cases like default/init pinctrl setup would never be performed by pwrseq. This becomes problem when the gpios used in pwrseq require pinctrl setup. Currently most of the common pinctrl setup is done in drivers/base/pinctrl.c by pinctrl_bind_pins(). There are two ways to solve this issue on either convert pwrseq drivers to a proper platform drivers or copy the exact code from pcintrl_bind_pins(). I prefer converting pwrseq to proper drivers so that other cases like setting up clks/parents from dt would also be possible. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-12-22mmc: pwrseq: constify mmc_pwrseq_ops structuresJulia Lawall1-1/+1
The mmc_pwrseq_ops structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-03-23mmc: pwrseq: simplify alloc/free hooksAlexandre Courbot1-2/+4
The alloc() and free() hooks required each pwrseq implementation to set host->pwrseq themselves. This is error-prone and could be done at a higher level if alloc() was changed to return a pointer to a struct mmc_pwrseq instead of an error code. This patch performs this change and moves the burden of maintaining host->pwrseq from the power sequence hooks to the pwrseq code. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-02-04mmc: pwrseq: add driver for emmc hardware resetMarek Szyprowski1-0/+1
This patch provides a simple mmc-pwrseq-emmc driver, which controls single gpio line. It perform standard eMMC hw reset procedure, as descibed by Jedec 4.4 specification. This procedure is performed just after MMC core enabled power to the given mmc host (to fix possible issues if bootloader has left eMMC card in initialized or unknown state), and before performing complete system reboot (also in case of emergency reboot call). The latter is needed on boards, which doesn't have hardware reset logic connected to emmc card and (limited or broken) ROM bootloaders are unable to read second stage from the emmc card if the card is left in unknown or already initialized state. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-01-28mmc: pwrseq: Initial support for the simple MMC power sequence providerUlf Hansson1-0/+2
To add the core part for the MMC power sequence, let's start by adding initial support for the simple MMC power sequence provider. In this initial step, the MMC power sequence node are fetched and the compatible string for the simple MMC power sequence provider are verified. At this point we don't parse the node for any properties, but instead that will be handled from following patches. Since there are no properties supported yet, let's just implement the ->alloc() and the ->free() callbacks. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
2015-01-28mmc: core: Initial support for MMC power sequencesUlf Hansson1-0/+40
System on chip designs may specify a specific MMC power sequence. To successfully detect an (e)MMC/SD/SDIO card, that power sequence must be followed while initializing the card. To be able to handle these SOC specific power sequences, let's add a MMC power sequence interface. It provides the following functions to help the mmc core to deal with these power sequences. mmc_pwrseq_alloc() - Invoked from mmc_of_parse(), to initialize data. mmc_pwrseq_pre_power_on()- Invoked in the beginning of mmc_power_up(). mmc_pwrseq_post_power_on()- Invoked at the end in mmc_power_up(). mmc_pwrseq_power_off()- Invoked from mmc_power_off(). mmc_pwrseq_free() - Invoked from mmc_free_host(), to free data. Each MMC power sequence provider will be responsible to implement a set of callbacks. These callbacks mirrors the functions above. This patch adds the skeleton, following patches will extend the core of the MMC power sequence and add support for a specific simple MMC power sequence. Do note, since the mmc_pwrseq_alloc() is invoked from mmc_of_parse(), host drivers needs to make use of this API to enable the support for MMC power sequences. Moreover the MMC power sequence support depends on CONFIG_OF. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>