summaryrefslogtreecommitdiff
path: root/drivers/misc
AgeCommit message (Collapse)AuthorFilesLines
2025-01-17misc: microchip: pci1xxxx: Resolve return code mismatch during GPIO set configRengarajan S1-1/+1
commit c7a5378a0f707686de3ddb489f1653c523bb7dcc upstream. Driver returns -EOPNOTSUPPORTED on unsupported parameters case in set config. Upper level driver checks for -ENOTSUPP. Because of the return code mismatch, the ioctls from userspace fail. Resolve the issue by passing -ENOTSUPP during unsupported case. Fixes: 7d3e4d807df2 ("misc: microchip: pci1xxxx: load gpio driver for the gpio controller auxiliary device enumerated by the auxiliary bus driver.") Cc: stable <stable@kernel.org> Signed-off-by: Rengarajan S <rengarajan.s@microchip.com> Link: https://lore.kernel.org/r/20241205133626.1483499-3-rengarajan.s@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-01-17misc: microchip: pci1xxxx: Resolve kernel panic during GPIO IRQ handlingRengarajan S1-1/+1
commit 194f9f94a5169547d682e9bbcc5ae6d18a564735 upstream. Resolve kernel panic caused by improper handling of IRQs while accessing GPIO values. This is done by replacing generic_handle_irq with handle_nested_irq. Fixes: 1f4d8ae231f4 ("misc: microchip: pci1xxxx: Add gpio irq handler and irq helper functions irq_ack, irq_mask, irq_unmask and irq_set_type of irq_chip.") Cc: stable <stable@kernel.org> Signed-off-by: Rengarajan S <rengarajan.s@microchip.com> Link: https://lore.kernel.org/r/20241205133626.1483499-2-rengarajan.s@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-14misc: eeprom: eeprom_93cx6: Add quirk for extra read clock cycleParker Newman1-0/+10
[ Upstream commit 7738a7ab9d12c5371ed97114ee2132d4512e9fd5 ] Add a quirk similar to eeprom_93xx46 to add an extra clock cycle before reading data from the EEPROM. The 93Cx6 family of EEPROMs output a "dummy 0 bit" between the writing of the op-code/address from the host to the EEPROM and the reading of the actual data from the EEPROM. More info can be found on page 6 of the AT93C46 datasheet (linked below). Similar notes are found in other 93xx6 datasheets. In summary the read operation for a 93Cx6 EEPROM is: Write to EEPROM: 110[A5-A0] (9 bits) Read from EEPROM: 0[D15-D0] (17 bits) Where: 110 is the start bit and READ OpCode [A5-A0] is the address to read from 0 is a "dummy bit" preceding the actual data [D15-D0] is the actual data. Looking at the READ timing diagrams in the 93Cx6 datasheets the dummy bit should be clocked out on the last address bit clock cycle meaning it should be discarded naturally. However, depending on the hardware configuration sometimes this dummy bit is not discarded. This is the case with Exar PCI UARTs which require an extra clock cycle between sending the address and reading the data. Datasheet: https://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-5193-SEEPROM-AT93C46D-Datasheet.pdf Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Parker Newman <pnewman@connecttech.com> Link: https://lore.kernel.org/r/0f23973efefccd2544705a0480b4ad4c2353e407.1727880931.git.pnewman@connecttech.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-12-09Compiler Attributes: disable __counted_by for clang < 19.1.3Jan Hendrik Farr1-2/+2
commit f06e108a3dc53c0f5234d18de0bd224753db5019 upstream. This patch disables __counted_by for clang versions < 19.1.3 because of the two issues listed below. It does this by introducing CONFIG_CC_HAS_COUNTED_BY. 1. clang < 19.1.2 has a bug that can lead to __bdos returning 0: https://github.com/llvm/llvm-project/pull/110497 2. clang < 19.1.3 has a bug that can lead to __bdos being off by 4: https://github.com/llvm/llvm-project/pull/112636 Fixes: c8248faf3ca2 ("Compiler Attributes: counted_by: Adjust name and identifier expansion") Cc: stable@vger.kernel.org # 6.6.x: 16c31dd7fdf6: Compiler Attributes: counted_by: bump min gcc version Cc: stable@vger.kernel.org # 6.6.x: 2993eb7a8d34: Compiler Attributes: counted_by: fixup clang URL Cc: stable@vger.kernel.org # 6.6.x: 231dc3f0c936: lkdtm/bugs: Improve warning message for compilers without counted_by support Cc: stable@vger.kernel.org # 6.6.x Reported-by: Nathan Chancellor <nathan@kernel.org> Closes: https://lore.kernel.org/all/20240913164630.GA4091534@thelio-3990X/ Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202409260949.a1254989-oliver.sang@intel.com Link: https://lore.kernel.org/all/Zw8iawAF5W2uzGuh@archlinux/T/#m204c09f63c076586a02d194b87dffc7e81b8de7b Suggested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Jan Hendrik Farr <kernel@jfarr.cc> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Reviewed-by: Thorsten Blum <thorsten.blum@linux.dev> Link: https://lore.kernel.org/r/20241029140036.577804-2-kernel@jfarr.cc Signed-off-by: Kees Cook <kees@kernel.org> Signed-off-by: Jan Hendrik Farr <kernel@jfarr.cc> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-12-09misc: apds990x: Fix missing pm_runtime_disable()Jinjie Ruan1-5/+7
[ Upstream commit 3c5d8b819d27012264edd17e6ae7fffda382fe44 ] The pm_runtime_disable() is missing in probe error path, so add it to fix it. Fixes: 92b1f84d46b2 ("drivers/misc: driver for APDS990X ALS and proximity sensors") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Link: https://lore.kernel.org/r/20240923035556.3009105-1-ruanjinjie@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-08mei: use kvmalloc for read bufferAlexander Usyskin1-2/+2
[ Upstream commit 4adf613e01bf99e1739f6ff3e162ad5b7d578d1a ] Read buffer is allocated according to max message size, reported by the firmware and may reach 64K in systems with pxp client. Contiguous 64k allocation may fail under memory pressure. Read buffer is used as in-driver message storage and not required to be contiguous. Use kvmalloc to allow kernel to allocate non-contiguous memory. Fixes: 3030dc056459 ("mei: add wrapper for queuing control commands.") Cc: stable <stable@kernel.org> Reported-by: Rohit Agarwal <rohiagar@chromium.org> Closes: https://lore.kernel.org/all/20240813084542.2921300-1-rohiagar@chromium.org/ Tested-by: Brian Geffon <bgeffon@google.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Acked-by: Tomas Winkler <tomasw@gmail.com> Link: https://lore.kernel.org/r/20241015123157.2337026-1-alexander.usyskin@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-11-08misc: sgi-gru: Don't disable preemption in GRU driverDimitri Sivanich3-8/+0
[ Upstream commit b983b271662bd6104d429b0fd97af3333ba760bf ] Disabling preemption in the GRU driver is unnecessary, and clashes with sleeping locks in several code paths. Remove preempt_disable and preempt_enable from the GRU driver. Signed-off-by: Dimitri Sivanich <sivanich@hpe.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-10-22misc: microchip: pci1xxxx: add support for NVMEM_DEVID_AUTO for OTP deviceHeiko Thiery1-0/+1
commit 2471787c1f0dae6721f60ab44be37460635d3732 upstream. By using NVMEM_DEVID_AUTO we support more than 1 device and automatically enumerate. Fixes: 0969001569e4 ("misc: microchip: pci1xxxx: Add support to read and write into PCI1XXXX OTP via NVMEM sysfs") Cc: stable@vger.kernel.org Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com> Reviewed-by: Michael Walle <mwalle@kernel.org> Link: https://lore.kernel.org/r/20241007071120.9522-2-heiko.thiery@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-10-22misc: microchip: pci1xxxx: add support for NVMEM_DEVID_AUTO for EEPROM deviceHeiko Thiery1-0/+1
commit 3c2d73de49be528276474c1a53f78b38ee11c1fa upstream. By using NVMEM_DEVID_AUTO we support more than 1 device and automatically enumerate. Fixes: 9ab5465349c0 ("misc: microchip: pci1xxxx: Add support to read and write into PCI1XXXX EEPROM via NVMEM sysfs") Cc: stable@vger.kernel.org Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com> Reviewed-by: Michael Walle <mwalle@kernel.org> Link: https://lore.kernel.org/r/20241007071120.9522-1-heiko.thiery@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-18eeprom: digsy_mtc: Fix 93xx46 driver probe failureAndy Shevchenko1-1/+1
[ Upstream commit 2b82641ad0620b2d71dc05024b20f82db7e1c0b6 ] The update to support other (bigger) types of EEPROMs broke the driver loading due to removal of the default size. Fix this by adding the respective (new) flag to the platform data. Fixes: 14374fbb3f06 ("misc: eeprom_93xx46: Add new 93c56 and 93c66 compatible strings") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20240508184905.2102633-3-andriy.shevchenko@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-12VMCI: Fix use-after-free when removing resource in vmci_resource_remove()David Fernandez Gonzalez1-1/+2
commit 48b9a8dabcc3cf5f961b2ebcd8933bf9204babb7 upstream. When removing a resource from vmci_resource_table in vmci_resource_remove(), the search is performed using the resource handle by comparing context and resource fields. It is possible though to create two resources with different types but same handle (same context and resource fields). When trying to remove one of the resources, vmci_resource_remove() may not remove the intended one, but the object will still be freed as in the case of the datagram type in vmci_datagram_destroy_handle(). vmci_resource_table will still hold a pointer to this freed resource leading to a use-after-free vulnerability. BUG: KASAN: use-after-free in vmci_handle_is_equal include/linux/vmw_vmci_defs.h:142 [inline] BUG: KASAN: use-after-free in vmci_resource_remove+0x3a1/0x410 drivers/misc/vmw_vmci/vmci_resource.c:147 Read of size 4 at addr ffff88801c16d800 by task syz-executor197/1592 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x82/0xa9 lib/dump_stack.c:106 print_address_description.constprop.0+0x21/0x366 mm/kasan/report.c:239 __kasan_report.cold+0x7f/0x132 mm/kasan/report.c:425 kasan_report+0x38/0x51 mm/kasan/report.c:442 vmci_handle_is_equal include/linux/vmw_vmci_defs.h:142 [inline] vmci_resource_remove+0x3a1/0x410 drivers/misc/vmw_vmci/vmci_resource.c:147 vmci_qp_broker_detach+0x89a/0x11b9 drivers/misc/vmw_vmci/vmci_queue_pair.c:2182 ctx_free_ctx+0x473/0xbe1 drivers/misc/vmw_vmci/vmci_context.c:444 kref_put include/linux/kref.h:65 [inline] vmci_ctx_put drivers/misc/vmw_vmci/vmci_context.c:497 [inline] vmci_ctx_destroy+0x170/0x1d6 drivers/misc/vmw_vmci/vmci_context.c:195 vmci_host_close+0x125/0x1ac drivers/misc/vmw_vmci/vmci_host.c:143 __fput+0x261/0xa34 fs/file_table.c:282 task_work_run+0xf0/0x194 kernel/task_work.c:164 tracehook_notify_resume include/linux/tracehook.h:189 [inline] exit_to_user_mode_loop+0x184/0x189 kernel/entry/common.c:187 exit_to_user_mode_prepare+0x11b/0x123 kernel/entry/common.c:220 __syscall_exit_to_user_mode_work kernel/entry/common.c:302 [inline] syscall_exit_to_user_mode+0x18/0x42 kernel/entry/common.c:313 do_syscall_64+0x41/0x85 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x6e/0x0 This change ensures the type is also checked when removing the resource from vmci_resource_table in vmci_resource_remove(). Fixes: bc63dedb7d46 ("VMCI: resource object implementation.") Cc: stable@vger.kernel.org Reported-by: George Kennedy <george.kennedy@oracle.com> Signed-off-by: David Fernandez Gonzalez <david.fernandez.gonzalez@oracle.com> Link: https://lore.kernel.org/r/20240828154338.754746-1-david.fernandez.gonzalez@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-12misc: fastrpc: Fix double free of 'buf' in error pathSukrut Bellary1-3/+2
commit e8c276d4dc0e19ee48385f74426aebc855b49aaf upstream. smatch warning: drivers/misc/fastrpc.c:1926 fastrpc_req_mmap() error: double free of 'buf' In fastrpc_req_mmap() error path, the fastrpc buffer is freed in fastrpc_req_munmap_impl() if unmap is successful. But in the end, there is an unconditional call to fastrpc_buf_free(). So the above case triggers the double free of fastrpc buf. Fixes: 72fa6f7820c4 ("misc: fastrpc: Rework fastrpc_req_munmap") Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Sukrut Bellary <sukrut.bellary@linux.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20240902141409.70371-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-08-29Revert "misc: fastrpc: Restrict untrusted app to attach to privileged PD"Griffin Kroah-Hartman1-19/+3
commit 9bb5e74b2bf88fbb024bb15ded3b011e02c673be upstream. This reverts commit bab2f5e8fd5d2f759db26b78d9db57412888f187. Joel reported that this commit breaks userspace and stops sensors in SDM845 from working. Also breaks other qcom SoC devices running postmarketOS. Cc: stable <stable@kernel.org> Cc: Ekansh Gupta <quic_ekangupt@quicinc.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reported-by: Joel Selvaraj <joelselvaraj.oss@gmail.com> Link: https://lore.kernel.org/r/9a9f5646-a554-4b65-8122-d212bb665c81@umsystem.edu Signed-off-by: Griffin Kroah-Hartman <griffin@kroah.com> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Fixes: bab2f5e8fd5d ("misc: fastrpc: Restrict untrusted app to attach to privileged PD") Link: https://lore.kernel.org/r/20240815094920.8242-1-griffin@kroah.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-25mei: demote client disconnect warning on suspend to debugAlexander Usyskin1-1/+1
[ Upstream commit 1db5322b7e6b58e1b304ce69a50e9dca798ca95b ] Change level for the "not connected" client message in the write callback from error to debug. The MEI driver currently disconnects all clients upon system suspend. This behavior is by design and user-space applications with open connections before the suspend are expected to handle errors upon resume, by reopening their handles, reconnecting, and retrying their operations. However, the current driver implementation logs an error message every time a write operation is attempted on a disconnected client. Since this is a normal and expected flow after system resume logging this as an error can be misleading. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20240530091415.725247-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-07-18misc: fastrpc: Restrict untrusted app to attach to privileged PDEkansh Gupta1-3/+19
commit bab2f5e8fd5d2f759db26b78d9db57412888f187 upstream. Untrusted application with access to only non-secure fastrpc device node can attach to root_pd or static PDs if it can make the respective init request. This can cause problems as the untrusted application can send bad requests to root_pd or static PDs. Add changes to reject attach to privileged PDs if the request is being made using non-secure fastrpc device node. Fixes: 0871561055e6 ("misc: fastrpc: Add support for audiopd") Cc: stable <stable@kernel.org> Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20240628114501.14310-7-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-18misc: fastrpc: Fix ownership reassignment of remote heapEkansh Gupta1-1/+3
commit a6f2f158f1ac4893a4967993105712bf3dad32d9 upstream. Audio PD daemon will allocate memory for audio PD dynamic loading usage when it is attaching for the first time to audio PD. As part of this, the memory ownership is moved to the VM where audio PD can use it. In case daemon process is killed without any impact to DSP audio PD, the daemon process will retry to attach to audio PD and in this case memory won't be reallocated. If the invoke fails due to any reason, as part of err_invoke, the memory ownership is getting reassigned to HLOS even when the memory was not allocated. At this time the audio PD might still be using the memory and an attemp of ownership reassignment would result in memory issue. Fixes: 0871561055e6 ("misc: fastrpc: Add support for audiopd") Cc: stable <stable@kernel.org> Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20240628114501.14310-6-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-18misc: fastrpc: Fix memory leak in audio daemon attach operationEkansh Gupta1-0/+1
commit ad0bd973a033003ca578c42a760d1dc77aeea15e upstream. Audio PD daemon send the name as part of the init IOCTL call. This name needs to be copied to kernel for which memory is allocated. This memory is never freed which might result in memory leak. Free the memory when it is not needed. Fixes: 0871561055e6 ("misc: fastrpc: Add support for audiopd") Cc: stable <stable@kernel.org> Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20240628114501.14310-5-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-18misc: fastrpc: Copy the complete capability structure to userEkansh Gupta1-1/+1
commit e7f0be3f09c6e955dc8009129862b562d8b64513 upstream. User is passing capability ioctl structure(argp) to get DSP capabilities. This argp is copied to a local structure to get domain and attribute_id information. After getting the capability, only capability value is getting copied to user argp which will not be useful if the use is trying to get the capability by checking the capability member of fastrpc_ioctl_capability structure. Copy the complete capability structure so that user can get the capability value from the expected member of the structure. Fixes: 6c16fd8bdd40 ("misc: fastrpc: Add support to get DSP capabilities") Cc: stable <stable@kernel.org> Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20240628114501.14310-3-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-18misc: fastrpc: Avoid updating PD type for capability requestEkansh Gupta1-1/+0
commit bfb6b07d2a30ffe98864d8cfc31fc00470063025 upstream. When user is requesting for DSP capability, the process pd type is getting updated to USER_PD which is incorrect as DSP will assume the process which is making the request is a user PD and this will never get updated back to the original value. The actual PD type should not be updated for capability request and it should be serviced by the respective PD on DSP side. Don't change process's PD type for DSP capability request. Fixes: 6c16fd8bdd40 ("misc: fastrpc: Add support to get DSP capabilities") Cc: stable <stable@kernel.org> Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com> Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20240628114501.14310-4-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-18misc: fastrpc: Fix DSP capabilities requestEkansh Gupta1-3/+8
commit 4cb7915f0a35e2fcc4be60b912c4be35cd830957 upstream. The DSP capability request call expects 2 arguments. First is the information about the total number of attributes to be copied from DSP and second is the information about the buffer where the DSP needs to copy the information. The current design is passing the information about the size to be copied from DSP which would be considered as a bad argument to the call by DSP causing a failure suggesting the same. The second argument carries the information about the buffer where the DSP needs to copy the capability information and the size to be copied. As the first entry of capability attribute is getting skipped, same should also be considered while sending the information to DSP. Add changes to pass proper arguments to DSP. Fixes: 6c16fd8bdd40 ("misc: fastrpc: Add support to get DSP capabilities") Cc: stable <stable@kernel.org> Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20240628114501.14310-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-07-18misc: microchip: pci1xxxx: Fix return value of nvmem callbacksJoy Chakraborty1-4/+0
commit a6a0f04e7d28378c181f76d32e4f965aa6a8b0a5 upstream. Read/write callbacks registered with nvmem core expect 0 to be returned on success and a negative value to be returned on failure. Currently pci1xxxx_otp_read()/pci1xxxx_otp_write() and pci1xxxx_eeprom_read()/pci1xxxx_eeprom_write() return the number of bytes read/written on success. Fix to return 0 on success. Fixes: 9ab5465349c0 ("misc: microchip: pci1xxxx: Add support to read and write into PCI1XXXX EEPROM via NVMEM sysfs") Fixes: 0969001569e4 ("misc: microchip: pci1xxxx: Add support to read and write into PCI1XXXX OTP via NVMEM sysfs") Cc: stable@vger.kernel.org Signed-off-by: Joy Chakraborty <joychakr@google.com> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/20240612070031.1215558-1-joychakr@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-21misc: microchip: pci1xxxx: Fix a memory leak in the error handling of ↵Yongzhi Liu1-2/+4
gp_aux_bus_probe() [ Upstream commit 77427e3d5c353e3dd98c7c0af322f8d9e3131ace ] There is a memory leak (forget to free allocated buffers) in a memory allocation failure path. Fix it to jump to the correct error handling code. Fixes: 393fc2f5948f ("misc: microchip: pci1xxxx: load auxiliary bus driver for the PIO function in the multi-function endpoint of pci1xxxx device.") Signed-off-by: Yongzhi Liu <hyperlyzcs@gmail.com> Reviewed-by: Kumaravel Thiagarajan <kumaravel.thiagarajan@microchip.com> Link: https://lore.kernel.org/r/20240523121434.21855-4-hyperlyzcs@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-21vmci: prevent speculation leaks by sanitizing event in event_deliver()Hagar Gamal Halim Hemdan1-1/+5
commit 8003f00d895310d409b2bf9ef907c56b42a4e0f4 upstream. Coverity spotted that event_msg is controlled by user-space, event_msg->event_data.event is passed to event_deliver() and used as an index without sanitization. This change ensures that the event index is sanitized to mitigate any possibility of speculative information leaks. This bug was discovered and resolved using Coverity Static Analysis Security Testing (SAST) by Synopsys, Inc. Only compile tested, no access to HW. Fixes: 1d990201f9bb ("VMCI: event handling implementation.") Cc: stable <stable@kernel.org> Signed-off-by: Hagar Gamal Halim Hemdan <hagarhem@amazon.com> Link: https://lore.kernel.org/stable/20231127193533.46174-1-hagarhem%40amazon.com Link: https://lore.kernel.org/r/20240430085916.4753-1-hagarhem@amazon.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-21misc: microchip: pci1xxxx: fix double free in the error handling of ↵Yongzhi Liu1-0/+3
gp_aux_bus_probe() commit 086c6cbcc563c81d55257f9b27e14faf1d0963d3 upstream. When auxiliary_device_add() returns error and then calls auxiliary_device_uninit(), callback function gp_auxiliary_device_release() calls ida_free() and kfree(aux_device_wrapper) to free memory. We should't call them again in the error handling path. Fix this by skipping the redundant cleanup functions. Fixes: 393fc2f5948f ("misc: microchip: pci1xxxx: load auxiliary bus driver for the PIO function in the multi-function endpoint of pci1xxxx device.") Signed-off-by: Yongzhi Liu <hyperlyzcs@gmail.com> Link: https://lore.kernel.org/r/20240523121434.21855-3-hyperlyzcs@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-21mei: me: release irq in mei_me_pci_resume error pathTomas Winkler1-1/+3
commit 283cb234ef95d94c61f59e1cd070cd9499b51292 upstream. The mei_me_pci_resume doesn't release irq on the error path, in case mei_start() fails. Cc: <stable@kernel.org> Fixes: 33ec08263147 ("mei: revamp mei reset state machine") Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20240604090728.1027307-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-06-12misc/pvpanic-pci: register attributes via pci_driverThomas Weißschuh1-3/+1
[ Upstream commit ee59be35d7a8be7fcaa2d61fb89734ab5c25e4ee ] In __pci_register_driver(), the pci core overwrites the dev_groups field of the embedded struct device_driver with the dev_groups from the outer struct pci_driver unconditionally. Set dev_groups in the pci_driver to make sure it is used. This was broken since the introduction of pvpanic-pci. Fixes: db3a4f0abefd ("misc/pvpanic: add PCI driver") Cc: stable@vger.kernel.org Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Fixes: ded13b9cfd59 ("PCI: Add support for dev_groups to struct pci_driver") Link: https://lore.kernel.org/r/20240411-pvpanic-pci-dev-groups-v1-1-db8cb69f1b09@weissschuh.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12misc/pvpanic: deduplicate common codeThomas Weißschuh4-122/+80
[ Upstream commit c1426d392aebc51da4944d950d89e483e43f6f14 ] pvpanic-mmio.c and pvpanic-pci.c share a lot of code. Refactor it into pvpanic.c where it doesn't have to be kept in sync manually and where the core logic can be understood more easily. No functional change. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/r/20231011-pvpanic-cleanup-v2-1-4b21d56f779f@weissschuh.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: ee59be35d7a8 ("misc/pvpanic-pci: register attributes via pci_driver") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12VMCI: Fix an error handling path in vmci_guest_probe_device()Christophe JAILLET1-2/+8
[ Upstream commit 73df3d6f2e9533e93a5039a33c40dd7216b81801 ] After a successful pci_iomap_range() call, pci_iounmap() should be called in the error handling path, as already done in the remove function. Add the missing call. The corresponding call was added in the remove function in commit 5ee109828e73 ("VMCI: dma dg: allocate send and receive buffers for DMA datagrams") Fixes: e283a0e8b7ea ("VMCI: dma dg: add MMIO access to registers") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Vishnu Dasa <vishnu.dasa@broadcom.com> Link: https://lore.kernel.org/r/a35bbc3876ae1da70e49dafde4435750e1477be3.1713961553.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-06-12lkdtm: Disable CFI checking for perms functionsKees Cook2-2/+2
[ Upstream commit fb28a8862dc4b5bf8e44578338f35d9c6c68339d ] The EXEC_RODATA test plays a lot of tricks to live in the .rodata section, and once again ran into objtool's (completely reasonable) assumptions that executable code should live in an executable section. However, this manifested only under CONFIG_CFI_CLANG=y, as one of the .cfi_sites was pointing into the .rodata section. Since we're testing non-CFI execution properties in perms.c (and rodata.c), we can disable CFI for the involved functions, and remove the CFI arguments from rodata.c entirely. Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202308301532.d7acf63e-oliver.sang@intel.com Fixes: 6342a20efbd8 ("objtool: Add elf_create_section_pair()") Link: https://lore.kernel.org/r/20240430234953.work.760-kees@kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17mei: me: add lunar lake point M DIDAlexander Usyskin2-0/+4
commit 4108a30f1097eead0f6bd5d885e6bf093b4d460f upstream. Add Lunar (Point) Lake M device id. Cc: stable@vger.kernel.org Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20240421135631.223362-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-05-17eeprom: at24: fix memory corruption race conditionDaniel Okazaki1-9/+9
[ Upstream commit f42c97027fb75776e2e9358d16bf4a99aeb04cf2 ] If the eeprom is not accessible, an nvmem device will be registered, the read will fail, and the device will be torn down. If another driver accesses the nvmem device after the teardown, it will reference invalid memory. Move the failure point before registering the nvmem device. Signed-off-by: Daniel Okazaki <dtokazaki@google.com> Fixes: b20eb4c1f026 ("eeprom: at24: drop unnecessary label") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240422174337.2487142-1-dtokazaki@google.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-05-17eeprom: at24: Probe for DDR3 thermal sensor in the SPD caseHeiner Kallweit1-0/+29
[ Upstream commit caba40ec3531b0849f44502a03117796e8c9f4a1 ] The DDR3 SPD data structure advertises the presence of a thermal sensor on a DDR3 module in byte 32, bit 7. Let's use this information to explicitly instantiate the thermal sensor I2C client instead of having to rely on class-based I2C probing. The temp sensor i2c address can be derived from the SPD i2c address, so we can directly instantiate the device and don't have to probe for it. If the temp sensor has been instantiated already by other means (e.g. class-based auto-detection), then the busy-check in i2c_new_client_device will detect this. Note: Thermal sensors on DDR4 DIMM's are instantiated from the ee1004 driver. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/68113672-3724-44d5-9ff8-313dd6628f8c@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: f42c97027fb7 ("eeprom: at24: fix memory corruption race condition") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-27mei: me: disable RPL-S on SPS and IGN firmwaresAlexander Usyskin1-1/+1
commit 0dc04112bee6fdd6eb847ccb32214703022c0269 upstream. Extend the quirk to disable MEI interface on Intel PCH Ignition (IGN) and SPS firmwares for RPL-S devices. These firmwares do not support the MEI protocol. Fixes: 3ed8c7d39cfe ("mei: me: add raptor lake point S DID") Cc: stable@vger.kernel.org Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20240312051958.118478-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-13VMCI: Fix possible memcpy() run-time warning in ↵Vasiliy Kovalev1-1/+2
vmci_datagram_invoke_guest_handler() commit e606e4b71798cc1df20e987dde2468e9527bd376 upstream. The changes are similar to those given in the commit 19b070fefd0d ("VMCI: Fix memcpy() run-time warning in dg_dispatch_as_host()"). Fix filling of the msg and msg_payload in dg_info struct, which prevents a possible "detected field-spanning write" of memcpy warning that is issued by the tracking mechanism __fortify_memcpy_chk. Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org> Link: https://lore.kernel.org/r/20240219105315.76955-1-kovalev@altlinux.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-13VMCI: Fix memcpy() run-time warning in dg_dispatch_as_host()Harshit Mogalapalli1-1/+2
[ Upstream commit 19b070fefd0d024af3daa7329cbc0d00de5302ec ] Syzkaller hit 'WARNING in dg_dispatch_as_host' bug. memcpy: detected field-spanning write (size 56) of single field "&dg_info->msg" at drivers/misc/vmw_vmci/vmci_datagram.c:237 (size 24) WARNING: CPU: 0 PID: 1555 at drivers/misc/vmw_vmci/vmci_datagram.c:237 dg_dispatch_as_host+0x88e/0xa60 drivers/misc/vmw_vmci/vmci_datagram.c:237 Some code commentry, based on my understanding: 544 #define VMCI_DG_SIZE(_dg) (VMCI_DG_HEADERSIZE + (size_t)(_dg)->payload_size) /// This is 24 + payload_size memcpy(&dg_info->msg, dg, dg_size); Destination = dg_info->msg ---> this is a 24 byte structure(struct vmci_datagram) Source = dg --> this is a 24 byte structure (struct vmci_datagram) Size = dg_size = 24 + payload_size {payload_size = 56-24 =32} -- Syzkaller managed to set payload_size to 32. 35 struct delayed_datagram_info { 36 struct datagram_entry *entry; 37 struct work_struct work; 38 bool in_dg_host_queue; 39 /* msg and msg_payload must be together. */ 40 struct vmci_datagram msg; 41 u8 msg_payload[]; 42 }; So those extra bytes of payload are copied into msg_payload[], a run time warning is seen while fuzzing with Syzkaller. One possible way to fix the warning is to split the memcpy() into two parts -- one -- direct assignment of msg and second taking care of payload. Gustavo quoted: "Under FORTIFY_SOURCE we should not copy data across multiple members in a structure." Reported-by: syzkaller <syzkaller@googlegroups.com> Suggested-by: Vegard Nossum <vegard.nossum@oracle.com> Suggested-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/20240105164001.2129796-2-harshit.m.mogalapalli@oracle.com Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-03mei: me: add arrow lake point H DIDAlexander Usyskin2-0/+2
commit 8436f25802ec028ac7254990893f3e01926d9b79 upstream. Add Arrow Lake H device id. Cc: stable@vger.kernel.org Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20240211103912.117105-2-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03mei: me: add arrow lake point S DIDAlexander Usyskin2-0/+2
commit 7a9b9012043e126f6d6f4683e67409312d1b707b upstream. Add Arrow Lake S device id. Cc: stable@vger.kernel.org Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20240211103912.117105-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03misc: fastrpc: Pass proper arguments to scm callEkansh Gupta1-4/+6
commit a283d7f179ff83976af27bcc71f7474cb4d7c348 upstream. For CMA memory allocation, ownership is assigned to DSP to make it accessible by the PD running on the DSP. With current implementation HLOS VM is stored in the channel structure during rpmsg_probe and this VM is passed to qcom_scm call as the source VM. The qcom_scm call will overwrite the passed source VM with the next VM which would cause a problem in case the scm call is again needed. Adding a local copy of source VM whereever scm call is made to avoid this problem. Fixes: 0871561055e6 ("misc: fastrpc: Add support for audiopd") Cc: stable <stable@kernel.org> Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com> Reviewed-by: Elliot Berman <quic_eberman@quicinc.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20240224114247.85953-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-03misc: lis3lv02d_i2c: Fix regulators getting en-/dis-abled twice on ↵Hans de Goede1-8/+13
suspend/resume commit ac3e0384073b2408d6cb0d972fee9fcc3776053d upstream. When not configured for wakeup lis3lv02d_i2c_suspend() will call lis3lv02d_poweroff() even if the device has already been turned off by the runtime-suspend handler and if configured for wakeup and the device is runtime-suspended at this point then it is not turned back on to serve as a wakeup source. Before commit b1b9f7a49440 ("misc: lis3lv02d_i2c: Add missing setting of the reg_ctrl callback"), lis3lv02d_poweroff() failed to disable the regulators which as a side effect made calling poweroff() twice ok. Now that poweroff() correctly disables the regulators, doing this twice triggers a WARN() in the regulator core: unbalanced disables for regulator-dummy WARNING: CPU: 1 PID: 92 at drivers/regulator/core.c:2999 _regulator_disable ... Fix lis3lv02d_i2c_suspend() to not call poweroff() a second time if already runtime-suspended and add a poweron() call when necessary to make wakeup work. lis3lv02d_i2c_resume() has similar issues, with an added weirness that it always powers on the device if it is runtime suspended, after which the first runtime-resume will call poweron() again, causing the enabled count for the regulator to increase by 1 every suspend/resume. These unbalanced regulator_enable() calls cause the regulator to never be turned off and trigger the following WARN() on driver unbind: WARNING: CPU: 1 PID: 1724 at drivers/regulator/core.c:2396 _regulator_put Fix this by making lis3lv02d_i2c_resume() mirror the new suspend(). Fixes: b1b9f7a49440 ("misc: lis3lv02d_i2c: Add missing setting of the reg_ctrl callback") Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Closes: https://lore.kernel.org/regressions/5fc6da74-af0a-4aac-b4d5-a000b39a63a5@molgen.mpg.de/ Cc: stable@vger.kernel.org Cc: regressions@lists.linux.dev Signed-off-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 15 7590 Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Link: https://lore.kernel.org/r/20240220190035.53402-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-27mei: gsc_proxy: match component when GSC is on different busAlexander Usyskin1-3/+5
commit a0776c214d47ea4f7aaef138095beaa41cff03ef upstream. On Arrow Lake S systems, MEI is no longer strictly connected to bus 0, while graphics remain exclusively on bus 0. Adapt the component matching logic to accommodate this change: Original behavior: Required both MEI and graphics to be on the same bus 0. New behavior: Only enforces graphics to be on bus 0 (integrated), allowing MEI to reside on any bus. This ensures compatibility with Arrow Lake S and maintains functionality for the legacy systems. Fixes: 1dd924f6885b ("mei: gsc_proxy: add gsc proxy driver") Cc: stable@vger.kernel.org # v6.3+ Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20240220200020.231192-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01misc: open-dice: Fix spurious lockdep warningWill Deacon1-1/+1
[ Upstream commit ac9762a74c7ca7cbfcb4c65f5871373653a046ac ] When probing the open-dice driver with PROVE_LOCKING=y, lockdep complains that the mutex in 'drvdata->lock' has a non-static key: | INFO: trying to register non-static key. | The code is fine but needs lockdep annotation, or maybe | you didn't initialize this object before use? | turning off the locking correctness validator. Fix the problem by initialising the mutex memory with mutex_init() instead of __MUTEX_INITIALIZER(). Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Brazdil <dbrazdil@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20240126152410.10148-1-will@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23misc: fastrpc: Mark all sessions as invalid in cb_removeEkansh Gupta1-1/+1
commit a4e61de63e34860c36a71d1a364edba16fb6203b upstream. In remoteproc shutdown sequence, rpmsg_remove will get called which would depopulate all the child nodes that have been created during rpmsg_probe. This would result in cb_remove call for all the context banks for the remoteproc. In cb_remove function, session 0 is getting skipped which is not correct as session 0 will never become available again. Add changes to mark session 0 also as invalid. Fixes: f6f9279f2bf0 ("misc: fastrpc: Add Qualcomm fastrpc basic driver model") Cc: stable <stable@kernel.org> Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com> Link: https://lore.kernel.org/r/20240108114833.20480-1-quic_ekangupt@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-05misc: lis3lv02d_i2c: Add missing setting of the reg_ctrl callbackHans de Goede1-0/+1
[ Upstream commit b1b9f7a494400c0c39f8cd83de3aaa6111c55087 ] The lis3lv02d_i2c driver was missing a line to set the lis3_dev's reg_ctrl callback. lis3_reg_ctrl(on) is called from the init callback, but due to the missing reg_ctrl callback the regulators where never turned off again leading to the following oops/backtrace when detaching the driver: [ 82.313527] ------------[ cut here ]------------ [ 82.313546] WARNING: CPU: 1 PID: 1724 at drivers/regulator/core.c:2396 _regulator_put+0x219/0x230 ... [ 82.313695] RIP: 0010:_regulator_put+0x219/0x230 ... [ 82.314767] Call Trace: [ 82.314770] <TASK> [ 82.314772] ? _regulator_put+0x219/0x230 [ 82.314777] ? __warn+0x81/0x170 [ 82.314784] ? _regulator_put+0x219/0x230 [ 82.314791] ? report_bug+0x18d/0x1c0 [ 82.314801] ? handle_bug+0x3c/0x80 [ 82.314806] ? exc_invalid_op+0x13/0x60 [ 82.314812] ? asm_exc_invalid_op+0x16/0x20 [ 82.314845] ? _regulator_put+0x219/0x230 [ 82.314857] regulator_bulk_free+0x39/0x60 [ 82.314865] i2c_device_remove+0x22/0xb0 Add the missing setting of the callback so that the regulators properly get turned off again when not used. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20231224183402.95640-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13misc: mei: client.c: fix problem of return '-EOVERFLOW' in mei_cl_writeSu Hui1-1/+1
[ Upstream commit ee6236027218f8531916f1c5caa5dc330379f287 ] Clang static analyzer complains that value stored to 'rets' is never read.Let 'buf_len = -EOVERFLOW' to make sure we can return '-EOVERFLOW'. Fixes: 8c8d964ce90f ("mei: move hbuf_depth from the mei device to the hw modules") Signed-off-by: Su Hui <suhui@nfschina.com> Link: https://lore.kernel.org/r/20231120095523.178385-2-suhui@nfschina.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13misc: mei: client.c: return negative error code in mei_cl_writeSu Hui1-1/+1
[ Upstream commit 8f06aee8089cf42fd99a20184501bd1347ce61b9 ] mei_msg_hdr_init() return negative error code, rets should be 'PTR_ERR(mei_hdr)' rather than '-PTR_ERR(mei_hdr)'. Fixes: 0cd7c01a60f8 ("mei: add support for mei extended header.") Signed-off-by: Su Hui <suhui@nfschina.com> Link: https://lore.kernel.org/r/20231120095523.178385-1-suhui@nfschina.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28misc: pci_endpoint_test: Add Device ID for R-Car S4-8 PCIe controllerYoshihiro Shimoda1-0/+4
[ Upstream commit 6c4b39937f4e65688ea294725ae432b2565821ff ] Add Renesas R8A779F0 in pci_device_id table so that pci-epf-test can be used for testing PCIe EP on R-Car S4-8. Link: https://lore.kernel.org/linux-pci/20231018085631.1121289-16-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Acked-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20misc: st_core: Do not call kfree_skb() under spin_lock_irqsave()Jinjie Ruan1-3/+4
[ Upstream commit 4d08c3d12b61022501989f9f071514d2d6f77c47 ] It is not allowed to call kfree_skb() from hardware interrupt context or with hardware interrupts being disabled. So replace kfree_skb() with dev_kfree_skb_irq() under spin_lock_irqsave(). Compile tested only. Fixes: 53618cc1e51e ("Staging: sources for ST core") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Link: https://lore.kernel.org/r/20230823035020.1281892-1-ruanjinjie@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-08misc: pci_endpoint_test: Add deviceID for J721S2 PCIe EP device supportSiddharth Vadapalli1-0/+4
commit 8293703a492ae97c86af27c75b76e6239ec86483 upstream. Add DEVICE_ID for J721S2 and enable support for endpoints configured with this DEVICE_ID in the pci_endpoint_test driver. Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Cc: stable <stable@kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20231020120248.3168406-1-s-vadapalli@ti.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-16misc: fastrpc: Unmap only if buffer is unmapped from DSPEkansh Gupta1-3/+5
For unmapping any buffer from kernel, it should first be unmapped from DSP. In case unmap from DSP request fails, the map should not be removed from kernel as it might lead to SMMU faults and other memory issues. Fixes: 5c1b97c7d7b7 ("misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP") Cc: stable <stable@kernel.org> Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20231013122007.174464-5-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-16misc: fastrpc: Clean buffers on remote invocation failuresEkansh Gupta1-5/+5
With current design, buffers and dma handles are not freed in case of remote invocation failures returned from DSP. This could result in buffer leakings and dma handle pointing to wrong memory in the fastrpc kernel. Adding changes to clean buffers and dma handles even when remote invocation to DSP returns failures. Fixes: c68cfb718c8f ("misc: fastrpc: Add support for context Invoke method") Cc: stable <stable@kernel.org> Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20231013122007.174464-4-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-18 05:00:19 +0300