summaryrefslogtreecommitdiff
path: root/drivers/misc
AgeCommit message (Collapse)AuthorFilesLines
2012-10-01Merge tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds2-77/+67
Pull TTY changes from Greg Kroah-Hartman: "As we skipped the merge window for 3.6-rc1 for the tty tree, everything is now settled down and working properly, so we are ready for 3.7-rc1. Here's the patchset, it's big, but the large changes are removing a firmware file and adding a staging tty driver (it depended on the tty core changes, so it's going through this tree instead of the staging tree.) All of these patches have been in the linux-next tree for a while. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" Fix up more-or-less trivial conflicts in - drivers/char/pcmcia/synclink_cs.c: tty NULL dereference fix vs tty_port_cts_enabled() helper function - drivers/staging/{Kconfig,Makefile}: add-add conflict (dgrp driver added close to other staging drivers) - drivers/staging/ipack/devices/ipoctal.c: "split ipoctal_channel from iopctal" vs "TTY: use tty_port_register_device" * tag 'tty-3.6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (235 commits) tty/serial: Add kgdb_nmi driver tty/serial/amba-pl011: Quiesce interrupts in poll_get_char tty/serial/amba-pl011: Implement poll_init callback tty/serial/core: Introduce poll_init callback kdb: Turn KGDB_KDB=n stubs into static inlines kdb: Implement disable_nmi command kernel/debug: Mask KGDB NMI upon entry serial: pl011: handle corruption at high clock speeds serial: sccnxp: Make 'default' choice in switch last serial: sccnxp: Remove mask termios caps for SW flow control serial: sccnxp: Report actual baudrate back to core serial: samsung: Add poll_get_char & poll_put_char Powerpc 8xx CPM_UART setting MAXIDL register proportionaly to baud rate Powerpc 8xx CPM_UART maxidl should not depend on fifo size Powerpc 8xx CPM_UART too many interrupts Powerpc 8xx CPM_UART desynchronisation serial: set correct baud_base for EXSYS EX-41092 Dual 16950 serial: omap: fix the reciever line error case 8250: blacklist Winbond CIR port 8250_pnp: do pnp probe before legacy probe ...
2012-09-27drivers/misc/lis3lv02d/lis3lv02d_i2c.c: add lis3lv02d device tree initAnilKumar Ch1-0/+23
Add lis3lv02d device tree initialization code/API to take pdata from device node. Also adds device tree init matching table support to lis3lv02d_i2c driver. If the driver data is passed from device tree, then this driver picks up platform data from device node through common/generic lis3lv02d.c driver. [akpm@linux-foundation.org: fix CONFIG_OF=n build] Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Cc: Eric Piel <eric.piel@tremplin-utc.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-27drivers/misc/lis3lv02d/lis3lv02d_spi.c: add lis3lv02d device tree initAnilKumar Ch1-2/+6
Add lis3lv02d device tree initialization code/API to take pdata from device node. Also remove CONFIG_OF ifdef from the driver, if CONFIG_OF is not defined then OF APIs returns 0. [akpm@linux-foundation.org: fix CONFIG_OF=n build[ Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Cc: Eric Piel <eric.piel@tremplin-utc.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-27drivers/misc/lis3lv02d: remove lis3lv02d driver DT initAnilKumar Ch2-6/+3
Remove lis3lv02d driver device tree initialization from core driver and move it to individual drivers. With the current implementation some pdata parameters are missing if we use lis3lv02d_init_device() in lis3lv02d_i2c driver. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Cc: Eric Piel <eric.piel@tremplin-utc.net> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-27drivers/misc/lis3lv02d/lis3lv02d_spi.c: add DT matching table passthru codeDaniel Mack1-0/+17
If probed from a device tree, this driver now passes the node information to the generic part, so the runtime information can be derived. Successfully tested on a PXA3xx board. [akpm@linux-foundation.org: fix lis302dl_spi_dt_ids unused warning when CONFIG_OF=n] Signed-off-by: Daniel Mack <zonque@gmail.com> Cc: Rob Herring <robherring2@gmail.com> Cc: "AnilKumar, Chimata" <anilkumar@ti.com> Reviewed-by: Éric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-27drivers/misc/lis3lv02d: add generic DT matching codeDaniel Mack2-0/+157
Adds logic to parse lis3 properties from a device tree node and store them in a freshly allocated lis3lv02d_platform_data. Note that the actual match tables are left out here. This part should happen in the drivers that bind to the individual busses (SPI/I2C/PCI). Also adds some DT bindinds documentation. Signed-off-by: Daniel Mack <zonque@gmail.com> Cc: Rob Herring <robherring2@gmail.com> Cc: "AnilKumar, Chimata" <anilkumar@ti.com> Reviewed-by: Éric Piel <eric.piel@tremplin-utc.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-27lis3lv02d: fix some comments specific to lis331dlh driverAnilKumar Ch3-8/+9
Fix some minor problems in comments of lis331dlh driver * correct comments with respect to 2G sensitivity * correct typo lis3331dlh mistake to lis331dlh * add comment to say only 2G range is supported * change the function name from lis3lv02d_read_16 to lis331dlh_read_data. * update i2c_device_id table entry to maintaine consistancy * update sensor display message Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-27MISC: hpilo, remove pci_disable_deviceJiri Slaby1-2/+9
pci_disable_device(pdev) used to be in pci remove function. But this PCI device has two functions with interrupt lines connected to a single pin. The other one is a USB host controller. So when we disable the PIN there e.g. by rmmod hpilo, the controller stops working. It is because the interrupt link is disabled in ACPI since it is not refcounted yet. See acpi_pci_link_free_irq called from acpi_pci_irq_disable. It is not the best solution whatsoever, but as a workaround until the ACPI irq link refcounting is sorted out this should fix the reported errors. References: https://lkml.org/lkml/2008/11/4/535 Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: Nobin Mathew <nobin.mathew@gmail.com> Cc: Robert Hancock <hancockr@shaw.ca> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Altobelli <david.altobelli@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18char/misc: remove CONFIG_EXPERIMENTAL dependenciesGreg Kroah-Hartman4-12/+11
As discussed at the kernel summit this year, CONFIG_EXPERIMENTAL means nothing, so let's get rid of it. Cc: Kees Cook <keescook@chromium.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Anatolij Gustschin <agust@denx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-11mei: don't print buffer as a stringTomas Winkler1-8/+1
non readable junk was printed to the logs we will add proper buffer dumping mechanism later if needed Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-11mei: struct mei_message_data doesn't have to be packedTomas Winkler1-1/+1
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-11mei: add error messages for open count errorsTomas Winkler1-2/+8
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06misc: use module_spi_driverDevendra Naga1-12/+1
The _init and _exit functions can be replaced with the module_spi_driver macro, which actually implements static int __init drv_init(void) { spi_register_driver(&driv_op); return 0; } module_init(drv_init); static void __exit drv_exit(void) { spi_unregister_driver(&driv_op); } module_exit(drv_exit); Signed-off-by: Devendra Naga <develkernel412222@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06tifm: use module_pci_driverDevendra Naga1-13/+1
tifm_7xx1_init and tifm_7xx1_exit with module_init and module_exit calls can be replaced with the module_pci_driver call, as they are similar to what module_pci_driver does Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06misc/at25, dt: Improve at25 SPI eeprom device tree bindings.David Daney1-25/+58
Commit 002176db (misc: at25: Parse dt settings) added device tree bindings the differ significantly in style from the I2C EEPROM bindings and don't seem well vetted. Here I deprecate (but still support) the "at25,*" properties, and add what I hope is a better alternative. These new bindings also happen to be deployed in the field and were previously submitted for consideration here: https://lists.ozlabs.org/pipermail/devicetree-discuss/2012-May/015556.html The advantages of the new bindings are that they are similar to the I2C EEPROMs and they don't conflate read-only and the address width modes in a binary encoded blob. Signed-off-by: David Daney <david.daney@cavium.com> Cc: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Michael Hennerich <michael.hennerich@analog.com> Cc: Axel Lin <axel.lin@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06mei: add lynx point pci device idsTomas Winkler2-0/+4
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06mei: fix max number of open handlesTomas Winkler1-6/+8
There was internal confusion in wether bus message clinet (0) is counted in or not The bitmap me_clients_map that accomodate was initialized w/o it (255) but later on it the clinet 0 was reserved Thus were able to open only 252 instead of 253 clients Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06mei: rename struct pci_dev *mei_device to mei_pdevTomas Winkler2-14/+8
1. rename mei_device variable to mei_pdev to remove confusion with type 'struct mei_device' 2. mei_pdev no longer need to be gloabal so make it static and remove the declaration from the header file Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06lis3lv02d: Add STMicroelectronics lis331dlh digital accelerometerAnilKumar Ch3-8/+85
This patch adds support for lis331dlh digital accelerometer to the lis3lv02d driver family. Adds ID field for detecting the lis331dlh module, based on this ID field lis3lv02d driver will export the lis331dlh module functionality. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-27Merge v3.6-rc3 into 'char-misc-next'Greg Kroah-Hartman14-336/+312
This resolves a conflict in: drivers/misc/mei/interrupt.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-27Merge 3.6-rc3 into tty-nextGreg Kroah-Hartman4-21/+94
This picks up all of the different fixes in Linus's tree that we also need here. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-22drivers/misc/sgi-xp/xpc_uv.c: SGI XPC fails to load when cpu 0 is out of IRQ ↵Robin Holt1-19/+65
resources On many of our larger systems, CPU 0 has had all of its IRQ resources consumed before XPC loads. Worst cases on machines with multiple 10 GigE cards and multiple IB cards have depleted the entire first socket of IRQs. This patch makes selecting the node upon which IRQs are allocated (as well as all the other GRU Message Queue structures) specifiable as a module load param and has a default behavior of searching all nodes/cpus for an available resources. [akpm@linux-foundation.org: fix build: include cpu.h and module.h] Signed-off-by: Robin Holt <holt@sgi.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-08-16ti-st: Fix check for pdata->chip_awake function pointerMatthias Kaehlcke1-1/+1
ll_device_want_to_wakeup(): Fix the NULL pointer check on pdata->chip_awake, which is performed on the wrong function pointer Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16mei: add mei_quirk_probe functionTomas Winkler1-0/+27
The main purpose of this function is to exclude ME devices without support for MEI/HECI interface from binding Currently affected systems are C600/X79 based servers that expose PCI device even though it doesn't supported ME Interface. MEI driver accessing such nonfunctional device can corrupt the system. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16drivers/misc/ti-st: check chip_awake NULL checkMatthias Kaehlcke1-1/+1
Before calling on any of the platform hooks, shared transport driver checks for the validity of the platform hooks as to whether it is provided or not. A wrong function was being checked for, before the chip_awake hook was called by the HCI-LL sleep logic handler. This patch corrects the check. Signed-off-by: Pavan Savoy <pavan_savoy@ti.com> Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16drivers/misc/ti-st: fix read fw version cmdPavan Savoy1-13/+27
If the read firmware version response from the chip is split into multiple frames of UART buffer being received by the host, the TI-ST driver as of today is unable to put the pieces of response together unlike other responses. Signed-off-by: Pavan Savoy <pavan_savoy@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16drivers/misc/ti-st: use cpu friendly completionsPavan Savoy1-9/+9
Be nice to CPU and don't hog the resources, use a nice wait_for_interruptible timeout for completions instead of wait_for_timeout which is non-interruptible. Signed-off-by: Pavan Savoy <pavan_savoy@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16drivers/misc/ti-st: chip_disable on timeoutPavan Savoy1-1/+1
If the communication with the WiLink breaks down for whatever reasons & the ti-st driver is unable to un-install the line-discipline during clean-up in st_kim_stop, the GPIO should be held low (BT_EN=0) & the platform's chip disable hook shall also be called. Signed-off-by: Pavan Savoy <pavan_savoy@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16drivers/misc/ti-st: remove sparse warningsPavan Savoy2-11/+13
remove sparse warnings by assigning right storage specifiers to functions and also clean-up the declarations in the include/linux/ti_wilink_st.h Signed-off-by: Pavan Savoy <pavan_savoy@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16drivers/misc/ti-st: remove gpio handlingPavan Savoy1-36/+1
A platform hook to enable/disable the chip was introduced to perform specific activities to power-up and power-down the WL chip. Moving the power-up/down sequence also there makes more sense, since different platforms have begun to have their own ways to power-up/down the chip. This patch removes all of the gpio handling done by the driver in st_kim_start/st_kim_stop & any of the gpio request done in the probe function. Signed-off-by: Pavan Savoy <pavan_savoy@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16driver: misc: bmp085: remove "of_match_table" property.Sourav Poddar1-7/+0
There is an automatic binding done for I2C devices in the of_i2c core code. So, DT will be able to bind to any I2C device using the already existing table: MODULE_DEVICE_TABLE(i2c, bmp085_id). Tested on omap5430 evm. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16carma: remove unnecessary DMA_INTERRUPT capabilityQiang Liu2-2/+1
These drivers set the DMA_INTERRUPT capability bit when requesting a DMA controller channel. This was historical, and is no longer needed. Recent changes to the drivers/dma/fsldma.c driver have removed support for this flag. This makes the carma drivers unable to find a DMA channel with the required capabilities. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16pch_phub: use module_pci_driverDevendra Naga1-12/+1
this driver's pch_phub_pci_init, and pch_phub_pci_exit functions with the module_init and module_exit calls can be replaced with module_pci_driver Signed-off-by: Devendra Naga <develkernel412222@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16pch_phub: fix sparse warningDevendra Naga1-1/+1
sparse warns about using 0 as NULL pointer, drivers/misc/pch_phub.c:702:44: warning: Using plain integer as NULL pointer Signed-off-by: Devendra Naga <develkernel412222@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16mei: wd: use watchdog_set/get_drvdata for passing mei_deviceTomas Winkler1-13/+16
use watchdog_set/get_drvdata for passing mei_device to watchdog_ops handlers instead of using global mei_device Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16mei: wd: decouple and revamp watchdog state machineTomas Winkler6-27/+34
Before ME watchdog was exported through standard watchdog interface it was closed and started together with the mei device. The major issue is that closing ME watchdog disabled also MEI device, to fix this the watchdog state machine has to be independent from MEI state machine. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16mei: wd: rename watchdog constants to be more descriptiveTomas Winkler4-26/+23
1. rename defines to more be descriptive 2. remove duplicated defines from interface.h 3. add common prefix MEI_ Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16mei: wd: add option WDIOF_SETTIMEOUTTomas Winkler1-1/+3
According watchdog-kernel-api.txt WDIOF_SETTIMEOUT should be set if the driver supplies set_timeout function Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16mei: fix device stall after wd is stoppedTomas Winkler1-1/+1
After watchdog was disabled the driver would stall due to wrong calculation of credits reduction The cat&paste bug was introduced in the commit 7bdf72d3d8059a50214069ea4b87c2174645f40f mei: introduce mei_data2slots wrapper Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16mei: fix device stall after wd is stoppedTomas Winkler1-1/+1
After watchdog was disabled the driver would stall due to wrong calculation of credits reduction The cat&paste bug was introduced in the commit 7bdf72d3d8059a50214069ea4b87c2174645f40f mei: introduce mei_data2slots wrapper Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16mei: name space for mei device stateTomas Winkler6-55/+77
1. add MEI_DEV_ prefix for mei device state enums 2. rename mei_state to dev_state 3. add constant to string translation for debug purposes Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16mei: style : reformat PCI device IDsTomas Winkler1-40/+39
1. reformat PCI ids list in hw.h for better readability 2. update some code and brand names Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16mei: use KBUILD_MODNAME when allocating resources from the OSTomas Winkler1-8/+6
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16mei: add mei_quirk_probe functionTomas Winkler1-0/+27
The main purpose of this function is to exclude ME devices without support for MEI/HECI interface from binding Currently affected systems are C600/X79 based servers that expose PCI device even though it doesn't supported ME Interface. MEI driver accessing such nonfunctional device can corrupt the system. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16mei: revamp me client search functionTomas Winkler5-74/+60
me client search functions returns index into me_client array according me client id or me client uuid. 1. Add common prefix for the functions mei_me_cl_<> 2. create new function mei_me_cl_by_id that wraps open coded loops scattered over the code 3. rename mei_find_me_client_index to mei_me_cl_by_uuid 4. rename mei_find_me_client_update_filext to mei_me_cl_update_filext and updates its parameter names Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-11misc: pti, use tty_port_register_deviceJiri Slaby1-3/+3
So now we have enough of tty_ports, so we can signal the TTY layer to use them by tty_port_register_device. The upside is that we look like we can introduce tty_port_easy_open and put it directly as tty_operations->open to drivers doing nothing in open and using tty_port_register_device. Because the easy open can obtain a tty_port rather easily from a tty now. Heh, what a nice by-product. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: J Freyensee <james_p_freyensee@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-11misc: pti, fix tty_port countJiri Slaby1-7/+10
We now have *one* tty_port for both TTYs. How this was supposed to work? Change it to have a tty_port for each of TTYs. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: J Freyensee <james_p_freyensee@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-11misc: pti, fix fail pathsJiri Slaby1-28/+25
Fail paths in ->probe and pti_init are incomplete. Fix that by adding proper clean-up paths. Note that we used to leak tty_driver on module unload. This is fixed here too. tty_unregister_driver needs not retval checking, so remove that. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: J Freyensee <james_p_freyensee@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-11misc: pti, do the opposite of ->probe in ->removeJiri Slaby1-14/+7
Currently, probe initializes some parts. Then, some of them are unwound in ->remove, some in module_exit. Let us do the opposite of whole ->probe in ->remove. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: J Freyensee <james_p_freyensee@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-11misc: pti, move ->remove to the PCI codeJiri Slaby1-16/+16
The function is lost somewhere in the forest. Move it to have it along with probe and other pci_driver stuff. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: J Freyensee <james_p_freyensee@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-22 08:02:04 +0300