summaryrefslogtreecommitdiff
path: root/drivers/misc/mei
AgeCommit message (Collapse)AuthorFilesLines
2015-09-12Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds1-0/+1
Pull watchdog updates from Wim Van Sebroeck: - new driver for NXP LPC18xx Watchdog Timer - new driver for SAMA5D4 watchdog timer - add support for MCP79 to nv_tco driver - clean-up and improvement of the mpc8xxx watchdog driver - improvements to gpio-wdt - at91sam9_wdt clock improvements ... and other small fixes and improvements * git://www.linux-watchdog.org/linux-watchdog: (25 commits) Watchdog: Fix parent of watchdog_devices watchdog: at91rm9200: Correct check for syscon_node_to_regmap() errors watchdog: at91sam9: get and use slow clock Documentation: dt: binding: atmel-sama5d4-wdt: for SAMA5D4 watchdog driver watchdog: add a driver to support SAMA5D4 watchdog timer watchdog: mpc8xxx: allow to compile for MPC512x watchdog: mpc8xxx: use better error code when watchdog cannot be enabled watchdog: mpc8xxx: use dynamic memory for device specific data watchdog: mpc8xxx: use devm_ioremap_resource to map memory watchdog: mpc8xxx: make use of of_device_get_match_data watchdog: mpc8xxx: simplify registration watchdog: mpc8xxx: remove dead code watchdog: lpc18xx_wdt_get_timeleft() can be static DT: watchdog: Add NXP LPC18xx Watchdog Timer binding documentation watchdog: NXP LPC18xx Watchdog Timer Driver watchdog: gpio-wdt: ping already at startup for always running devices watchdog: gpio-wdt: be more strict about hw_algo matching Documentation: watchdog: at91sam9_wdt: add clocks property watchdog: booke_wdt: Use infrastructure to check timeout limits watchdog: (nv_tco) add support for MCP79 ...
2015-09-09Watchdog: Fix parent of watchdog_devicesPratyush Anand1-0/+1
/sys/class/watchdog/watchdogn/device/modalias can help to identify the driver/module for a given watchdog node. However, many wdt devices do not set their parent and so, we do not see an entry for device in sysfs for such devices. This patch fixes parent of watchdog_device so that /sys/class/watchdog/watchdogn/device is populated. Exceptions: booke, diag288, octeon, softdog and w83627hf -- They do not have any parent. Not sure, how we can identify driver for these devices. Signed-off-by: Pratyush Anand <panand@redhat.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Guenter Roeck <linux@roeck-us.net> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2015-08-05mei: remove check on pm_runtime_active in __mei_cl_disconnectTomas Winkler1-3/+0
Remove bogus check on pm_runtime_active that prevented disconnection from a client in case the device was resuming from power gating but not yet active. Fix regression introduced by 18901357e70ae29e3fd1c58712a6847c2ae52eae mei: disconnect on connection request timeout Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: hbm: bump supported HBM version to 2.0Tomas Winkler1-2/+2
HBM 2.0 version for Sunrise point Skylake (PCH) based devices Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: me: add sunrise point device idsTomas Winkler2-0/+9
Add MEI devices ids for Intel Sunrisepoint Skylake (PCH) Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: me: d0i3: exit d0i3 on driver start and enter it on stopAlexander Usyskin1-9/+29
A BIOS may put the device in d0i3 on platform initialization so it won’t consume power even if the driver is not present, in turn the driver has to wake up the devices on load in order to perform the initialization sequence and move it back to low power state on driver remove. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: me: d0i3: move mei_me_hw_reset down in the fileAlexander Usyskin1-51/+52
Move mei_me_hw_reset down in the source file to avoid forward declarations when introducing d0i3 flow in the next patch. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: me: d0i3: add d0i3 enter/exit state machineAlexander Usyskin4-10/+346
Rework mei power gating state machine to support entry and exit to and from D0i3 power state. The choice between legacy and D0i3 routines is conditioned on d0i3_supported flag. The patch introduces warning: drivers/misc/mei/hw-me.c:901:12: warning: ‘mei_me_d0i3_enter’ defined but not used [-Wunused-function] it will go away in consequent patch Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: hbm: reorganize the power gating responsesAlexander Usyskin1-15/+70
Before adding support for D0i3 we need to reorganize the hbm pg handling Move HBM PG response code to dedicated functions in order to unclutter hbm command switch. Add check for the right system state before message processing and return -EPROTO in state mismatch case. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: me: d0i3: enable d0i3 interruptsAlexander Usyskin4-35/+33
D0i3 adds additional interrupt reason bit, therefore we add a variable intr_source to save the interrupt causes for further dispatching. The interrupt cause is saved in the irq quick handler to achieve unified behavior for both MSI enabled and shared interrupt platforms. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: me: d0i3: add flag to indicate D0i3 supportAlexander Usyskin3-3/+14
Detect d0i3 low power state during hw configuration, the value is set in HFS_1 pci config reigister. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: me: d0i3: add the control registersTomas Winkler1-5/+15
Starting with Intel Sunrisepoint (Skylake PCH) the MEI device supports D0i3 low power state. Add D0i3 control registers. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: hbm: add new error code MEI_CL_CONN_NOT_ALLOWEDAlexander Usyskin2-0/+3
The device can return error 5 (NOT_ALLOWED) on connection attempt. This error can happen if: 1. An another connection attempt is in progress 2. There is an attempt to connect a fixed (connectionless) client 3. The number of available connections is exceeded (new in HBM 2.0) We should not hit that error unless there is an internal book keeping hiccup except option (3), therefore we translate the error code to errno EBUSY; Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: bus: add and call callback on notify eventAlexander Usyskin3-4/+49
Enable drivers on mei client bus to subscribe to asynchronous event notifications. Introduce events_mask to the existing callback infrastructure so it is possible to handle both RX and event notification. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: implement fasync for event notificationTomas Winkler5-4/+53
A process can be informed about client notification also via SIGIO with POLL_PRI event. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: support polling for event notificationTomas Winkler1-0/+8
Polling on priority events is translated on waiting for event notification. One need to enable notification prior for calling select or poll system call otherwise process will not wait. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: add async event notification ioctlsTomas Winkler1-0/+67
Add ioctl IOCTL_MEI_NOTIFY_SET for enabling and disabling async event notification. Add ioctl IOCTL_MEI_NOTIFY_GET for receiving and acking an event notification. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: add a handler that waits for notification on eventTomas Winkler4-1/+58
mei_cl_notify_get is to be called by a host client to wait, receive, and ack the event notification. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: add mei_cl_notify_request commandTomas Winkler4-4/+157
Add per client notification request infrastructure that allows client to enable or disable async event notification. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: enable async event notifications only from hbm version 2.0Tomas Winkler4-0/+14
Only FW version 2.0 and newer support the async event notification. For backward compatibility block the feature if the FW version is older then 2.0 Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: implement async notification hbm messagesTomas Winkler3-0/+145
Implement sending and reception handlers for the async event notification hbm commands. Add client notification book keeping data required for the messages notify_en to indicate whether notification is enabled notify_ev to indicate whether an event is pending Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: define async notification hbm commandsTomas Winkler1-0/+62
FW has gained new capability where a FW client can asynchronously notify the host that an event has occurred in its process. The notification doesn't provide any data and host may need to query further the FW client in order to get details of the event. Host can subscribe or unsubscribe to the event notification via designated HBM commands, and also the notification is carried on a new HBM command. This patch adds definitions of asynchronous notification HBM commands. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: disconnect on connection request timeoutAlexander Usyskin6-29/+95
For the FW with HBM version >= 2.0 we don't need to reset the whole device in case of a particular client failing to connect, it is enough to send disconnect a request to bring the device to the stable state. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: support for dynamic clientsTomas Winkler4-2/+144
HBM version 2.0 and above allows ME clients in the system to register/unregister after the system is fully initialized. Clients may be added or removed after enum_resp message was received 1. To preserve backward compatibility the driver can opt-in to receive client add messages by setting allow_add field in enum_req 2. A new client is added upon reception of MEI_HBM_ADD_CLIENT_REQ_CMD 3. A client is removed in a lazy manner when connection request respond with MEI_HBMS_CLIENT_NOT_FOUND status Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: bus: link client devices instead of host clientsTomas Winkler5-310/+213
MEI bus was designed around nfc and was hard to extend. Instead of the hard coded way of adding the devices on the mei bus we scan the whole me client list and create a device for each eligible me client (mei_cl_bus_rescan); currently we support only clients with single connection and fixed address clients. NFC radio name detection is run as a fixup routine The patch replaces handling the device list based on struct me_cl to device list based on me_cl_devices. The creating a connection is pushed from the device creation time to device enablement. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: bus: simplify how we build nfc bus nameTomas Winkler3-64/+55
Remove the dependency on struct ndev from the nfc device name creation function so it is possible to use it in a fixup routine Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: bus: blacklist clients by number of connectionsTomas Winkler1-0/+19
Currently we support only clients with single connection and fixed address clients so all other clients are blacklisted Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: bus: blacklist the nfc info clientTomas Winkler1-4/+19
Blacklist nfc info client which is only used for retrieval of the NFC radio version Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: bus: enable running fixup routines before device registrationTomas Winkler3-16/+107
Split the device registration into allocation and device struct initialization, device setup, and the final device registration. This why it is possible to run fixups and quirks during the setup stage on an initialized device. Each fixup routine effects do_match flag. If the flag is set to false at the end the device won't be registered on the bus. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: bus: add me client device list infrastructureTomas Winkler3-2/+6
Instead of holding the list of host clients (me_cl) we want to keep the list me client devices (mei_cl_device) This way we can create host to me client connection only when needed. Add list head to mei_cl_device and cl_bus_lock Add bus_added flag to the me client (mei_me_client) to track if the appropriate mei_cl_device was already created and is_added flag to mei_cl_device to track if it was already added to the device list across the bus rescans Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: bus: add reference to bus device in struct mei_cl_clientTomas Winkler1-0/+17
Add reference to the bus device (mei_device) for easier access. To ensures that referencing cldev->bus is valid during cldev life time we increase the bus ref counter on a client device creation and drop it on the device release. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: bus: revamp probe and remove functionsTomas Winkler1-11/+30
Instead of generating device id on the fly during probing we find the matching id entry on the device id table. Get bus the module reference counter so it cannot be unloaded after the driver has bounded to the client device Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: bus: revamp device matchingTomas Winkler1-19/+44
mei_cl_device_match now calls mei_cl_device_find that returns the matching device id in the device id table. We will utilize the mei_cl_device_find during probing to locate the matching entry. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: bus: report if event registration failedTomas Winkler1-1/+5
If event registeration has failed, the caller should know about it. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: bus: don't enable events implicitly in device enableTomas Winkler1-3/+0
Do not enable events implicitly in mei_cl_enable_device, it should be done explicitly using mei_cl_register_event_cb so the events are enabled only when needed. The NFC drivers has been already using it that way so no need for further changes just remove the code from mei_cl_enable_device. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: bus: rename uevent handler to mei_cl_device_ueventTomas Winkler1-2/+10
Rename mei_cl_uevent to mei_cl_device_uevent to match the naming convention of mei_cl_bus_type functions Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: bus: move driver api functions at the start of the fileTomas Winkler1-262/+351
To make the file more organize move mei client driver api to the start of the file and add Kdoc. There are no functional changes in this patch. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: bus: rename nfc.c to bus-fixup.cTomas Winkler2-1/+1
The bus-fixup.c will be a place for fixups and quirks for all types of me client devices. As for now it contians only the fixup for setting the nfc device name on the me client bus. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: bus: fix drivers and devices names confusionTomas Winkler3-176/+176
In the mei bus layer there is use of different variables of driver and device types with no clear naming convention. There are generic struct device and struct driver, then mei_cl_{device, driver}, and finally mei_device which in this context serves as a bus device. The patch sets following naming convention: the variables of type struct device remains dev the variables of type struct driver remains drv the variables of type struct mei_cl_device are now cldev the variables of type struct mei_cl_driver are now cldrv the variables of type struct mei_device are now bus, in bus layer context Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: do not access freed cb in blocking writeAlexander Usyskin1-7/+9
The mei_cl_write function is giving up on a write cb ownership after it was sent or queued. The write cb is then freed in the completion handler. Especially during blocking write mei_cl_write function waits for the completion handler and then access the freed memory to fetch the written size. The quick fix is to store the buffer size prior to sending, the size is not altered during the flow. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-23mei: prevent unloading mei hw modules while the device is opened.Tomas Winkler1-1/+1
chrdev_open() increases reference counter on cdev->owner. Instead of assigning the owner to mei subsystem, the owner has to be set to the underlaying HW module (mei_me or mei_txe), so once the device is opened the HW module cannot be unloaded. Cc: <stable@vger.kernel.org> #3.17+ Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-08mei: nfc: fix deadlock on shutdown/suspend pathTomas Winkler3-19/+2
In function mei_nfc_host_exit mei_cl_remove_device cannot be called under the device mutex as device removing flow invokes the device driver remove handler that calls in turn to mei_cl_disable_device which naturally acquires the device mutex. Also remove mei_cl_bus_remove_devices which has the same issue, but is never executed as currently the only device on the mei client bus is NFC and a new device cannot be easily added till the bus revamp is completed. This fixes regression caused by commit be9b720a0ccb ("mei_phy: move all nfc logic from mei driver to nfc") Prior to this change the nfc driver remove handler called to no-op disable function while actual nfc device was disabled directly from the mei driver. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-14mei: me: wait for power gating exit confirmationAlexander Usyskin4-5/+80
Fix the hbm power gating state machine so it will wait till it receives confirmation interrupt for the PG_ISOLATION_EXIT message. In process of the suspend flow the devices first have to exit from the power gating state (runtime pm resume). If we do not handle the confirmation interrupt after sending PG_ISOLATION_EXIT message, we may receive it already after the suspend flow has changed the device state and interrupt will be interpreted as a spurious event, consequently link reset will be invoked which will prevent the device from completing the suspend flow kernel: [6603] mei_reset:136: mei_me 0000:00:16.0: powering down: end of reset kernel: [476] mei_me_irq_thread_handler:643: mei_me 0000:00:16.0: function called after ISR to handle the interrupt processing. kernel: mei_me 0000:00:16.0: FW not ready: resetting Cc: <stable@vger.kernel.org> #3.18+ Cc: Gabriele Mazzotta <gabriele.mzt@gmail.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=86241 Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=770397 Tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-14mei: reset flow control on the last client disconnectionAlexander Usyskin1-0/+3
The FW resets the flow control for single buffer clients when the last host client disconnects, also the driver has to follow this policy and zero the flow control counter in such case. Cc: <stable@vger.kernel.org> #4.1 Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-31mei: fix up uuid matchingGreg Kroah-Hartman1-7/+2
A previous commit, c93b76b34b4d ("mei: bus: report also uuid in module alias") caused a build error as I missed applying a needed patch to add some macros to uapi/linux/uuid.h. Instead of those additional macros, change the mei code to use the existing uuid structure directly. Fixes: c93b76b34b4d Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24mei: export hbm features to debugfs under devstateTomas Winkler1-0/+7
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24mei: export mei client device struct to external useTomas Winkler1-35/+0
Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24mei: bus: kill mei_cl_opsTomas Winkler1-24/+0
since we move all nfc hanling to the mei_phy module we can kill mei_cl_ops Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24NFC: mei_phy: move all nfc logic from mei driver to nfcTomas Winkler3-207/+11
move nfc logic to mei_phy module, we prefer as much as possible not to deal with a particualr client protocol in the mei generic infrasutcutre Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24mei: bus: add name and uuid into device attributesTomas Winkler1-0/+33
Export name and uuid via sysfs and uevent Cc: linux-api@vger.kernel.org Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-20 14:07:08 +0300