summaryrefslogtreecommitdiff
path: root/drivers/misc/mei/mei_dev.h
AgeCommit message (Collapse)AuthorFilesLines
2014-09-24mei: extract supported features from the hbm versionTomas Winkler1-0/+4
extract supported hbm features and commands from the hbm version Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-24mei: wait for hbm start non-interruptibleAlexander Usyskin1-1/+1
We cannot handle user interrupt in context of hbm start so we only wait for time out which is reasonably short. 1. Add kdoc 2. Rename state to better reflect its function 3. Simplify wait condition and rename wait_recvd_msg to wait_hbm_start Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-24mei: use disconnect name consistentlyTomas Winkler1-4/+2
Rename mei_cl_irq_close to mei_cl_irq_disconnect and MEI_FOP_CLOSE to MEI_FOP_DISCONNECT Remove unused MEI_FOP_OPEN Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-24mei: add mei_me_cl_by_uuid_id functionTomas Winkler1-1/+1
When handling dynamic clients there might be a race scenario in which two me clients with the same me address would be linked in the me clients list, therefore we need to search by both uuid and me address. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-24mei: use list for me clients book keepingTomas Winkler1-2/+2
To support dynamic addition/remove of clients it is more convenient to use list instead of static array Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-23mei: drop unused hw dependent fw status functionsAlexander Usyskin1-3/+0
We introduced unified FW status function in patch mei: add per device configuration (lkml.org/lkml/2014/5/12/607) This change made hw_ops functions unused and obsolete therefore we remove these functions from source code. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-10mei: move from misc to char deviceAlexander Usyskin1-1/+8
We need to support more then one mei interface hence the simple misc devices is not longer an option In order not break the user space a device with pci function 0 need to be linked to /dev/mei Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-28mei: me: move probe quirk to cfg structureTomas Winkler1-0/+2
Move quirk FW type detector to cfg structure Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-28mei: add per device configurationAlexander Usyskin1-6/+21
Add mei_cfg structure that holds per device configuration data and hooks, as the first step we add firmware status register offsets Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-04mei: extract fw status registersAlexander Usyskin1-0/+28
Fetch FW status registers, as they are important in in understanding of FW reset reasons Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-04mei: me: use runtime PG pm domain for non wakeable devicesTomas Winkler1-0/+3
For non wakeable devices we can't use pci runtime framework as we are not able to wakeup from D3 states. Instead we create new pg runtime domain that only drives ME power gating protocol to reduce the power consumption. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-04mei: add function to check write queuesTomas Winkler1-0/+2
The driver needs to check whether the write queue idle before entering power gating Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-04mei: expose hardware power gating state to mei layerTomas Winkler1-0/+38
Since the runtime pm and the internal power gating cannot be in complete sync in regards to I/O operations, we need to expose the device hardware internal power gating state to mei layer 2. We add pg_state handler that translate the hw internal pg state to mei layer 2. We add power gating event variable to keep power track of power gating transitions Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Reviewed-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-04mei: condition PGI support on HW and HBM versionTomas Winkler1-0/+10
Enable power gating isolation only if hw and fw support it. This is indicated by ME_PGIC_HRA bit in ME_CSR_HA register and on HBM protocol version. The information is exported to MEI layer through new pg_is_enabled hw op. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-04mei: implement power gating isolation hbm layerTomas Winkler1-0/+1
Add send message functions and receive dispatch stubs for power gating isolation hbm protocol. The protocol consist of requests for entering and exiting the power gating isolation state and their responses. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-18mei: fix Unnecessary space after function pointer nameTomas Winkler1-12/+12
Fix checkpatch warining: Unnecessary space after function pointer name Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-18mei: make me hw headers private to me hw.Tomas Winkler1-1/+0
Remove includes of me-hw.h and me-hw-regs.h headers from the mei generic code. The mei layer should not depend on hw specific headers Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-01mei: revamp writing slot countingTomas Winkler1-2/+2
Since txe use doorbell and not circular buffer we have to cheat in write slot counting, txe always consume all the slots upon write. In order for it to work we need to track slots using mei_hbuf_empty_slots() instead of tracking it in mei layer Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-01mei: add mei_hbuf_acquire wrapperTomas Winkler1-0/+2
A client has to acquire host buffer before writing, we add lock like wrapper to replace the code snippet if (dev->hbuf_is_ready) dev->hbuf_is_ready = false; Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-18mei: wd and amthif use mei_cl_ api for dis/connectionTomas Winkler1-1/+1
Connect wd and amthif through regular mei_cl_connect API as there is no reason to connect in asynchronous mode. Also use mei_cl_is_connected in order to protect flows instead of depending on wd_pending and amthif_timer Now we can remove all the special handling in hbm layer Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-18mei: Remove all bus devices from the mei_dev list when stopping the MEITomas Winkler1-0/+1
When stopping the MEI, we should remove and potentially unregister all bus devices queued on the mei_dev linked list. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-14mei: get rid of ext_msgTomas Winkler1-6/+2
Use more standard message writing for oob data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-14mei: rename MEI_FOP_IOCTL to MEI_FOP_CONNECTTomas Winkler1-6/+6
This operation actually only support connection and not a generic ioctl Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-14mei: limit the number of consecutive resetsTomas Winkler1-0/+7
give up reseting after 3 unsuccessful tries Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-14mei: revamp mei reset state machineTomas Winkler1-1/+2
1. MEI_DEV_RESETTING device state spans only hardware reset flow while starting dev state is saved into a local variable for further reference, this let us to reduce big if statements in case we are trying to avoid nested resets 2. During initializations if the reset ended in MEI_DEV_DISABLED device state we bail out with -ENODEV 3. Remove redundant interrupts_enabled parameter as this can be deduced from the starting dev_state 4. mei_reset propagates error code to the caller 5. Add mei_restart function to wrap the pci resume Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-09mei: fix syntax in comments and debug outputAlexander Usyskin1-2/+2
Fix syntax errors in comments and debug strings Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-09mei: do not run reset flow from the interrupt threadTomas Winkler1-0/+1
This fixes a potential deadlock in case of a firmware initiated reset mei_reset has a dialog with the interrupt thread hence it has to be run from an another work item Most of the mei_resets were called from mei_hbm_dispatch which is called in interrupt thread context so this function underwent major revamp. The error code is propagated to the interrupt thread and if needed the reset is scheduled from there. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-19mei: enable marking internal commandsTomas Winkler1-2/+3
Set hbm header bit 30 for internal commands This mark commands that are generated by the device driver Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-27mei: cleanup mei_irq_read_handlerTomas Winkler1-0/+10
1. Simplify function flow 2. Display errors in error or warnings level instead of debug. 3. Remove excessive debug messages Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-11-27mei: remove flash_work_queueTomas Winkler1-1/+2
Cancel each work properly and remove flash_work_queue. Quoting documentation: In most situations flushing the entire workqueue is overkill; you merely need to know that a particular work item isn't queued and isn't running. In such cases you should use cancel_delayed_work_sync() or cancel_work_sync() instead. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-04mei: revamp open handler countsTomas Winkler1-0/+1
Make open counter to be incremented and decremented from mei_cl_link and mei_cl_unlik function respectively Nfc was assuming symmetric linking API and thus open handler count was never decreased. This patch fixes that. We need to add separate open hander count for amthif which is handled out of link/unlink functions and doesn't break the symmetric API. Last we do not waste clients slots if amthif or wd are not present in the device. we don't need to allocates slots ahead it is all covered by link/unlink before the devices is responding to user space connection and thus not racing on allocation Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-27mei: make me client counters less error proneTomas Winkler1-3/+3
1. u8 counters are prone to hard to detect overflow: make them unsigned long to match bit_ functions argument type 2. don't check me_clients_num for negativity, it is unsigned. 3. init all the me client counters from one place Cc: <stable@vger.kernel.org> # 3.9+ Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-25mei: check whether hw start has succeededTomas Winkler1-2/+2
hw start may fail therefore the reset flow has to check for the return value Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-25mei: check if the hardware reset succeededTomas Winkler1-3/+3
The hw may have multiple steps for resetting so we need to check if it has really succeeded. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-30mei: deprecate the mei_wd_state_independence_msgTomas Winkler1-6/+0
wd independence is deprecated, remove it. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-21mei: revamp interrupt thread handlersTomas Winkler1-11/+2
1. Use common prefix mei_cl_irq_ and common parameter list for client handlers. 2. Update function kdocs Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-20mei: reseting -> resettingBill Nottingham1-1/+1
This enum leaks out to userspace via error messages, so fix the spelling. Signed-off-by: Bill Nottingham <notting@redhat.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-19mei: revamp mei_amthif_irq_read_messageTomas Winkler1-0/+9
Rename the function to mei_amthif_irq_read_msg and change parameters order Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-19mei: revamp hbm state machineTomas Winkler1-10/+3
1. Rename init_clients_state to hbm_state and use MEI_HBM_ prefix for HBM states 2. Remove recvd_msg and use hbm state for synchronizing hbm protocol has successful start. We can wake up the hbm event from start response handler and remove the hack from the interrupt thread 3. mei_hbm_start_wait function encapsulate start completion waiting Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-11mei: nfc: Initial nfc implementationSamuel Ortiz1-0/+10
NFC ME device is exported through the MEI bus to be consumed by the NFC subsystem. NFC is represented by two mei clients: An info one and the actual NFC one. In order to properly build the ME id we first need to retrieve the firmware information from the info client and then disconnect from it. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-09mei: bus: Add device enabling and disabling APISamuel Ortiz1-11/+17
It should be left to the drivers to enable and disable the device on the MEI bus when e.g getting probed. For drivers to be able to safely call the enable and disable hooks, the mei_cl_ops must be set before it's probed and thus this should happen before registering the device on the MEI bus. Hence the mei_cl_add_device() prototype change. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-09mei: add mei_cl_write functionTomas Winkler1-3/+3
consolidate write code to a specific me client in mei_cl_write function the function is called from mei device write handler and from mei_cl bus send function Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-06mei: add debugfs hooksTomas Winkler1-2/+18
debugfs exposes device state and list of me clients and their properties Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-29mei: bus: Synchronous API for the data transmissionSamuel Ortiz1-0/+1
Define a truly synchronous API for the bus Tx path by putting all pending request to the write list and wait for the interrupt tx handler to wake us up. The ___mei_cl_send() out path is also slightly reworked to make it look more like main.c:mei_write(). Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-29mei: bus: Call bus routines from the core codeSamuel Ortiz1-1/+5
Register the MEI bus type against the kernel core bus APIs and call the bus Rx handler from interrupt.c Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-29mei: bus: Add bus related structures to mei_clSamuel Ortiz1-0/+8
We keep track of all MEI devices on the bus through a specific linked list. We also have a mei_device instance in the mei_cl structure. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-29mei: bus: Initial implementation for I/O routinesSamuel Ortiz1-0/+30
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-29mei: bus: Initial MEI Client bus type implementationSamuel Ortiz1-0/+26
mei client bus will present some of the mei clients as devices for other standard subsystems Implement the probe, remove, match, device addtion routines, along with the sysfs and uevent ones. mei_cl_device_id is also added to mod_devicetable.h A mei-cleint-bus.txt document describing the rationale and the API usage is also added while ABI/testing/sysfs-bus-mei describeis the modalias ABI. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-29mei: rename function mei_hw_init to mei_startTomas Winkler1-1/+1
The hw initialization is now done as part of hw specific code this makes the name mei_hw_init little misleading. We rename it to mei_start in spirit of already existing functions mei_stop and mei_reset. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-29mei: drop RECOVERING_FROM_RESET device stateTomas Winkler1-1/+0
ECOVERING_FROM_RESET device state is never set we can remove it Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-04 00:10:56 +0300