summaryrefslogtreecommitdiff
path: root/drivers/misc/mei/hw.h
AgeCommit message (Collapse)AuthorFilesLines
2014-09-29mei: fix kernel-doc warningsAlexander Usyskin1-0/+2
Add missed parameters descriptions and return values descriptions Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-29mei: fix KDoc documentation formattingAlexander Usyskin1-23/+23
Fix Kdoc documentation formatting warnings genertaed by ./scripts/kernel-doc Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-24mei: add hbm commands return status valuesTomas Winkler1-6/+33
HBM uses global list of status values from which the values of particular commands are derived Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-24mei: use consistently me_addr in the hbm structuresTomas Winkler1-3/+2
Use consistently me_addr name in hbm protocol structures to represent in firmware client address Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-04mei: me: bump hbm version to 1.1 to support power gatingTomas Winkler1-1/+1
Communicate hbm version 1.1 to firmware to tell that we now support power gating isolation protocol Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-04mei: me: add pg exit and entry flow commandsTomas Winkler1-0/+1
For power gating entry we write hbm pg entry request command and then we set pg register For power gating exit we clear pg register and wait for exit request hbm command. Exit power gating request might also be initiated by the firmware w/o explicit driver request The power gating state is tracked by pg_state member of me_hw Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-04mei: condition PGI support on HW and HBM versionTomas Winkler1-0/+6
Enable power gating isolation only if hw and fw support it. This is indicated by ME_PGIC_HRA bit in ME_CSR_HA register and on HBM protocol version. The information is exported to MEI layer through new pg_is_enabled hw op. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-04mei: implement power gating isolation hbm layerTomas Winkler1-0/+16
Add send message functions and receive dispatch stubs for power gating isolation hbm protocol. The protocol consist of requests for entering and exiting the power gating isolation state and their responses. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-18mei: hbm: revamp client connect and disconnection statusAlexander Usyskin1-8/+8
1. Return -ENOTTY on client connect if the requested client was not found on the enumeration list or the client was internally disabled, in the later case FW will return NOT_FOUND. 2. Return -EBUSY if the client cannot be connected because of resource contention 3. Change response status enum to have MEI_CL_ prefix 4. Add function to translate response status to a string for more readable logging Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-02-08mei: allow multiple retries if the hw reset has failedTomas Winkler1-2/+2
In some rare case mei hw reset may take long time to settle. Instead of blocking resume flow we span another driver reset flow in separate work context This allows as to shorten hw reset timeout to something more acceptable by DPM_WATCHDOG_TIMEOUT Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-19mei: enable marking internal commandsTomas Winkler1-1/+2
Set hbm header bit 30 for internal commands This mark commands that are generated by the device driver Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-07mei: simplify preparing client host bus messagesTomas Winkler1-0/+16
Define a new parent type mei_hbm_cl_cmd for hbm commands that are sent on behalf of specific ME client. This allows us compacting boilerplate code via mei_hbm_cl_hdr function Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-07mei: mei_me_client is not hw API move to mei_dev.hTomas Winkler1-6/+0
Move struct mei_me_client from hw.h to mei_dev.h as it is not part of the hardware API. The structutre doesn't have to be packed. Add kdoc for this structure. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-07mei: extract device dependent constants into hw-me.hTomas Winkler1-98/+0
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-07mei: move internal host clients ids to mei_dev.h from hw.hTomas Winkler1-5/+0
Internal clients numbers are implementation choice and not defined by the hardware. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-16mei: use the same bus msg for connect and disconnect requestTomas Winkler1-6/+16
structs hbm_client_connect_request and hbm_client_disconnect_request have the same layout so we can drop the later Add kdoc for the request and response structure so it is clear they can be used for both purposes Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-01mei: normalize timeouts definitionsTomas Winkler1-7/+7
1. The hardware book defines timeouts in seconds so we stick to this and define the wrapper function mei_secs_to_jiffies around msecs_to_jiffies to use be used instead multiplying by HZ 2. We add name space prefix MEI_ to all timer defines Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-06mei: add lynx point pci device idsTomas Winkler1-0/+2
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-08-16mei: style : reformat PCI device IDsTomas Winkler1-40/+39
1. reformat PCI ids list in hw.h for better readability 2. update some code and brand names Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-02Staging: mei: move the mei code out of stagingGreg Kroah-Hartman1-0/+332
It's been cleaned up, and there's nothing else left to do, so move it out of staging into drivers/misc/ where all can use it now. Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: Oren Weil <oren.jer.weil@intel.com> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-22 17:14:15 +0300