summaryrefslogtreecommitdiff
path: root/drivers/misc/mei/hbm.c
AgeCommit message (Collapse)AuthorFilesLines
2017-04-08mei: hbm: remove variable length arraysTomas Winkler1-15/+14
Though VLA are supported by CC99 there are many cavities and should be avoided. 'const size_t len = sizeof()' that we used may not be set at the compile time hence generating VLA code. This fixes also sparse warning warning: Variable length array is used type. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-31mei: replace callback structures used as list head by list_headAlexander Usyskin1-1/+1
mei_dev structure used struct mei_cl_cb type variables as for holding callbacks list heads. Replace them by the actual struct list_head as there is no other info that is handled. This slims down the mei_dev structure and mostly streamline the code. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-11mei: bus: enable OS version only for SPT and newerAlexander Usyskin1-0/+4
Sending OS version for support of TPM2_ChangeEPS() is required only for SPT FW (HMB version 2.0) and newer. On older platforms the command should be just ignored by the firmware but some older platforms misbehave so it's safer to send the command only if required. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=192051 Fixes: 7279b238bade (mei: send OS type to the FW) Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jan Niehusmann <jan@gondor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27mei: stop the stall timer worker if not neededAlexander Usyskin1-0/+3
The stall timer worker checks periodically if there is a stalled i/o transaction. The issue with the current implementation is that the timer is ticking also when there is no pending i/o transaction. This patch provides a simple change that prevents rescheduling of the delayed work when there is no pending i/o. Cc: Andy Lutomirski <luto@kernel.org> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-30mei: add wrapper for queuing control commands.Tomas Winkler1-2/+2
Enclose the boiler plate code of allocating a control/hbm command cb and enqueueing it onto ctrl_wr.list in a convenient wrapper mei_cl_enqueue_ctrl_wr_cb(). This is a preparatory patch for enabling consecutive reads. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-30mei: use consistent naming for TX control flow creditsTomas Winkler1-21/+20
With the introduction of the receive control flow credits prefixed with rx_ we add tx_ prefix to the variables and function used for tracking the transmit control flow credits. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-30mei: hbm: add missing argument in the kdocTomas Winkler1-0/+1
In mei_hbm_cl_hdr buf argument was not described Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-11mei: drop wr_msg from the mei_dev structureAlexander Usyskin1-70/+67
The control messages are usually small, around 8 bytes, and can be allocated on the stack. Using on stack allocation allows us to drop 'wr_msg' a rather large buffer reserved in the mei_dev structure and relax contention of this device global buffer. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-01mei: fix NULL dereferencing during FW initiated disconnectionAlexander Usyskin1-2/+1
In the case when disconnection is initiated from the FW the driver is flushing items from the write control list while iterating over it: mei_irq_write_handler() list_for_each_entry_safe(ctrl_wr_list) <-- outer loop mei_cl_irq_disconnect_rsp() mei_cl_set_disconnected() mei_io_list_flush(ctrl_wr_list) <-- destorying list We move the list flushing to the completion routine. Cc: <stable@vger.kernel.org> #4.2+ Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-01mei: drop global me_client_indexAlexander Usyskin1-15/+8
Global me_client_index is used only during the enumeration process and can be effectively replaced by me_addr data from the last enumeration response as we always enumerate clients in the increasing order. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-08mei: split amthif client init from end of clients enumerationAlexander Usyskin1-1/+1
The amthif FW client can appear after the end of client enumeration. Amthif host client initialization is done now at FW client discovery time. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-08mei: hbm: send immediate reply flag in enum requestAlexander Usyskin1-1/+7
Signal the FW that it can send an HBM enumeration answer immediately, without waiting for FW initialization completion, meaning before all the FW clients are ready and registered. Organize enumeration response options to enum as a byproduct. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-08mei: bus: run rescan on me_clients list changeAlexander Usyskin1-1/+7
Since clients can be now added and removed during runtime we need to run bus rescan whenever me_clients list is modified. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-08mei: hbm: warn about fw-initiated disconnectAlexander Usyskin1-1/+1
The FW can initiate client disconnection only because an error condition, hence it make sense to bump the debug message to the warning level to have an entery in the log. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-08mei: fixed address clients for the new platformsAlexander Usyskin1-0/+4
Enable by default connection to fixed address clients from user-space for skylake and newer platform. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-18mei: fix the KDoc formatingAlexander Usyskin1-3/+3
KDoc function section start with double start: /** instead of /* Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-04mei: hbm: fix error in state check logicAlexander Usyskin1-1/+1
Use || instead && in state check. The latter is bogus and leads to following warning: drivers/misc/mei/hbm.c:1212:46: warning: logical ‘and’ of mutually exclusive tests is always false [-Wlogical-op] Fixes: 70ef835c84b3 ("mei: support for dynamic clients") Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: me: d0i3: add d0i3 enter/exit state machineAlexander Usyskin1-1/+12
Rework mei power gating state machine to support entry and exit to and from D0i3 power state. The choice between legacy and D0i3 routines is conditioned on d0i3_supported flag. The patch introduces warning: drivers/misc/mei/hw-me.c:901:12: warning: ‘mei_me_d0i3_enter’ defined but not used [-Wunused-function] it will go away in consequent patch Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: hbm: reorganize the power gating responsesAlexander Usyskin1-15/+70
Before adding support for D0i3 we need to reorganize the hbm pg handling Move HBM PG response code to dedicated functions in order to unclutter hbm command switch. Add check for the right system state before message processing and return -EPROTO in state mismatch case. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: hbm: add new error code MEI_CL_CONN_NOT_ALLOWEDAlexander Usyskin1-0/+2
The device can return error 5 (NOT_ALLOWED) on connection attempt. This error can happen if: 1. An another connection attempt is in progress 2. There is an attempt to connect a fixed (connectionless) client 3. The number of available connections is exceeded (new in HBM 2.0) We should not hit that error unless there is an internal book keeping hiccup except option (3), therefore we translate the error code to errno EBUSY; Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: implement fasync for event notificationTomas Winkler1-4/+2
A process can be informed about client notification also via SIGIO with POLL_PRI event. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: add a handler that waits for notification on eventTomas Winkler1-1/+3
mei_cl_notify_get is to be called by a host client to wait, receive, and ack the event notification. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: add mei_cl_notify_request commandTomas Winkler1-4/+1
Add per client notification request infrastructure that allows client to enable or disable async event notification. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: enable async event notifications only from hbm version 2.0Tomas Winkler1-0/+4
Only FW version 2.0 and newer support the async event notification. For backward compatibility block the feature if the FW version is older then 2.0 Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: implement async notification hbm messagesTomas Winkler1-0/+135
Implement sending and reception handlers for the async event notification hbm commands. Add client notification book keeping data required for the messages notify_en to indicate whether notification is enabled notify_ev to indicate whether an event is pending Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: disconnect on connection request timeoutAlexander Usyskin1-0/+4
For the FW with HBM version >= 2.0 we don't need to reset the whole device in case of a particular client failing to connect, it is enough to send disconnect a request to bring the device to the stable state. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-04mei: support for dynamic clientsTomas Winkler1-1/+91
HBM version 2.0 and above allows ME clients in the system to register/unregister after the system is fully initialized. Clients may be added or removed after enum_resp message was received 1. To preserve backward compatibility the driver can opt-in to receive client add messages by setting allow_add field in enum_req 2. A new client is added upon reception of MEI_HBM_ADD_CLIENT_REQ_CMD 3. A client is removed in a lazy manner when connection request respond with MEI_HBMS_CLIENT_NOT_FOUND status Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24mei: support for fixed address clientsAlexander Usyskin1-2/+2
Fixed address is simplified FW client that doesn't require connection and doesn't support flow control. So it can be only one host client per fixed FW client. Fixed client access is available only for drivers on mei bus, connection from user-space is blocked. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24mei: add a reference from the host client to the me clientAlexander Usyskin1-2/+2
Keep a pointer to associated me client in the host client object to eliminate me client searches. Check if the me client is active in the firmware by checking if its is linked on the me clients list Add accessors for the me client properties from host client. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-24mei: revamp client disconnection flowTomas Winkler1-4/+4
Split disconnected state into two parts first reception disconnect response from the firmware and second actually setting of disconnected state. Book keeping data are needed for processing and after firmware disconnected the client and are cleaned when setting the disconnected state in mei_cl_set_disconneted() function. Add mei_cl_send_disconnect to reduce code duplication. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-02mei: simplify io callback disposalTomas Winkler1-1/+1
Simplify disposal of io callback by removing the callback implicitly from its lookup list inside mei_io_cb_free Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-02mei: always initialize the callback with the intended operation typeTomas Winkler1-2/+1
We set the operation type at initialization time as each cb is used only for a single type of operation As a byproduct we add a convenient wrapper for allocating cb with the data buffer. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-02mei: revamp me clients list handlingTomas Winkler1-1/+2
1. Use rw lock to access the me_clients list 2. Reuse already defined find functions also when removing particular me client 3. Add wrappers for addition and deletion Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-01-25mei: add reference counting for me clientsTomas Winkler1-19/+15
To support dynamic addition and removal of me clients we add reference counter. Update kdoc with locking requirements. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-07mei: fix hbm MEI_HBM_STARTED ambiguityTomas Winkler1-2/+0
We have MEI_HBM_STARTED in two contexts one after start message was received and second after enumeration was completed. Because after start message reception we move immediately to the enumeration state, we need only the later meaning. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-04mei: hbm: use client specific print functionsAlexander Usyskin1-8/+8
We have host client in connect/disconnect response processors, so use client print functions to simplify and unify code. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-04mei: drop unneeded client NULL check in cb structureAlexander Usyskin1-5/+0
The pointer to client in the callback structure (cb->cl) can't be NULL with current locking. We can drop check and warnings as in some cases this just uselessly complicates the code flow. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-29mei: fix kernel-doc warningsAlexander Usyskin1-0/+2
Add missed parameters descriptions and return values descriptions Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-29mei: fix KDoc documentation formattingAlexander Usyskin1-22/+21
Fix Kdoc documentation formatting warnings genertaed by ./scripts/kernel-doc Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-29mei: drop me_client_presentation_numAlexander Usyskin1-2/+0
me_client_presentation_num field is not used for any particular purpose now, so it can be safely dropped. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-29mei: remove include to pci header from mei module filesTomas Winkler1-2/+3
Remove inclusion of linux/pci.h in mei layer however we need to include the headers that before got included implicitly from linux/pci.h. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-29mei: get rid of most of the pci dependencies in meiTomas Winkler1-33/+33
For purpose of adding testing HW we would like to get rid of pci dependency in generic mei code This patch provides only straight forward changes FW status and prob quirks need to be handled separately Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-29mei: move mei_hbm_hdr function from hbm.h the hbm.cTomas Winkler1-0/+16
mei_hbm_hder helper function is only used in hbm.c so there is no need to define it in a header file Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-29mei: fix style warning: Missing a blank line after declarationsTomas Winkler1-0/+5
fix new style warning: Missing a blank line after declarations Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-29mei: add hbm and pg state in devstate debugfs printAlexander Usyskin1-0/+16
Add hbm state, pg enablement and state to devstate file in debugfs (<debugfs>/mei/devstate) Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-24mei: extract supported features from the hbm versionTomas Winkler1-1/+24
extract supported hbm features and commands from the hbm version Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-24mei: simplify handling of hbm client eventsTomas Winkler1-31/+43
Add mei_hbm_cl_find_by_cmd handler to retrieve the destination client Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-24mei: wait for hbm start non-interruptibleAlexander Usyskin1-10/+16
We cannot handle user interrupt in context of hbm start so we only wait for time out which is reasonably short. 1. Add kdoc 2. Rename state to better reflect its function 3. Simplify wait condition and rename wait_recvd_msg to wait_hbm_start Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-24mei: revamp connect and disconnect response handlingTomas Winkler1-55/+63
Both responses have same flow only the client status update is different. We introduce handler mei_hbm_cl_res() that handles both responses Also we use per client wait queue (cl->wait) rather then global dev->wait_recvd_msg Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-24mei: add hbm commands return status valuesTomas Winkler1-2/+20
HBM uses global list of status values from which the values of particular commands are derived Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-28 11:48:11 +0300