summaryrefslogtreecommitdiff
path: root/drivers/mfd
AgeCommit message (Collapse)AuthorFilesLines
2014-04-02Merge tag 'regulator-v3.15' of ↵Linus Torvalds2-15/+194
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "This release has lots and lots of small cleanups and fixes in the regulator subsystem, mainly cleaning up some bad patterns that got duplicated in DT code, but otherwise very little of note outside of the scope of the relevant drivers: - Support for configuration of the initial state for gpio regulators with multi-voltage support. - Support for calling regulator_set_voltage() on fixed regulators. - New drivers for Broadcom BCM590xx, Freescale pfuze200, Samsung S2MPA01 & S2MPS11/4, some PWM controlled regulators found on some ST boards and TI TPS65218" * tag 'regulator-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (154 commits) regulator: aat2870: Use regulator_map_voltage_ascend regulator: st-pwm: Convert to get_voltage_sel regulator: Add new driver for ST's PWM controlled voltage regulators regulator: bcm590xx: Remove **rdev from struct bcm590xx_reg regulator: bcm590xx: Make the modalias matches the driver name regulator: s5m8767: Convert to use regulator_[enable|disable|is_enabled]_regmap regulator: db8500-prcmu: Set 1.8V as a fixed voltage for vsmps2 regulator: s2mps11: Add missing of_node_put regulator: s2mps11: Use of_get_child_by_name Documentation: mfd: s2mps11: Document support for S2MPS14 regulator: s2mps11: Add set_suspend_disable for S2MPS14 regulator: s2mps11: Add support for S2MPS14 regulators regulator: max8660: Fix brace alignment regulator: dbx500: use seq_puts() instead of seq_printf() regulator: dbx500-prcmu: Silence checkpatch warnings regulator: anatop: Remove checking control_reg in [set|get]_voltage_sel regulator: max8952: Silence checkpatch warning regulator: max8925: Silence checkpatch warning regulator: max8660: Silence checkpatch warnings regulator: arizona-ldo1: Correct default regulator init_data ...
2014-03-28Merge remote-tracking branches 'regmap/topic/cache', 'regmap/topic/irq', ↵Mark Brown2-21/+4
'regmap/topic/lock', 'regmap/topic/mmio', 'regmap/topic/nodev', 'regmap/topic/parse-val' and 'regmap/topic/patch' into regmap-next
2014-03-18mfd: Add support for S2MPA01 deviceSachin Kamat1-5/+44
Add the necessary entries required for S2MPA01 multi-function device. While at it also convert whitespaces to tabs in core.h. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-18mfd: sec-core: Silence compiler warningPankaj Dubey1-3/+3
When used 64bit compiler GCC warns as drivers/mfd/sec-core.c:199:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-18mfd: sec-core: Fix possible NULL pointer dereference when i2c_new_dummy errorKrzysztof Kozlowski1-0/+4
During probe the sec-core driver allocates dummy I2C device for RTC with i2c_new_dummy() but return value is not checked. In case of error (i2c_new_device(): memory allocation failure or I2C address cannot be used) this function returns NULL which is later used by devm_regmap_init_i2c() or i2c_unregister_device(). If i2c_new_dummy() fails for RTC device, fail also the probe for main MFD driver. Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-18mfd: sec: Add support for S2MPS14Krzysztof Kozlowski2-6/+131
Add support for S2MPS14 PMIC device to the MFD sec-core driver. The S2MPS14 is similar to S2MPS11 but it has fewer regulators, two clocks instead of three and a little different registers layout. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-18mfd: sec-irq: Use consistent S2MPS11 RTC alarm interrupt indexesKrzysztof Kozlowski1-4/+4
The S2MPS11 RTC has two alarms: alarm0 and alarm1 (corresponding interrupts are named similarly). Use consistent names for interrupts to limit possible errors. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-18mfd: sec-core: Select different RTC regmaps for devicesKrzysztof Kozlowski1-3/+12
This patch prepares for adding support for S2MPS14 RTC driver by selecting different regmaps for S2MPS1X/S5M876X RTC devices. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-03-18mfd: sec-core: Add maximum RTC register for regmap configKrzysztof Kozlowski1-0/+2
Add maximum register to the regmap used by rtc-s5m driver. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-02-26mfd: arizona: Use new regmap features for manual register patchCharles Keepax2-21/+4
On the wm5102 the register patches are applied manually, rather than by the regmap core. This application is wrapped in calls to regcache_cache_bypass. However, this is dangerous as other threads may be accessing the hardware at the same time as the pm_runtime operations and if they do so during the period whilst cache_bypass is enabled those writes will miss the cache when they shouldn't. Apply the register patch using the new regmap_multi_reg_write_bypassed function to avoid this problem. Also remove the call to regcache_cache_bypass from the hardware patch application as it is unneeded there and creates a similar window for writes to miss the cache. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-21Merge tag 'sound-3.14-rc4' of ↵Linus Torvalds1-2/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "This time we got a slightly higher volume than previous times, but all device-specific good fixes. Noticeable changes are fixes in davinci, and the removal of open-codes in HD-audio ca0132 driver. The rest are all small fixes and/or quirks" * tag 'sound-3.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Enable front audio jacks on one HP desktop model ALSA: hda/ca0132 - Fix recording from mode id 0x8 ALSA: hda/ca0132 - setup/cleanup streams ALSA: hda - add headset mic detect quirks for two Dell laptops ALSA: usb-audio: work around KEF X300A firmware bug ASoC: max98090: make REVISION_ID readable ASoC: txx9aclc_ac97: Fix kernel crash on probe ASoC: max98090: sync regcache on entering STANDBY ASoC: blackfin: Fix machine driver Kconfig dependencies ASoC: da9055: Fix device registration of PMIC and CODEC devices ASoC: fsl-esai: fix ESAI TDM slot setting ASoC: fsl: fix pm support of machine drivers ASoC: rt5640: Add ACPI ID for Intel Baytrail ASoC: davinci-evm: Add pm callbacks to platform driver ASoC: davinci-mcasp: Consolidate pm_runtime_get/put() use in the driver ASoC: davinci-mcasp: Configure xxTDM, xxFMT and xxFMCT registers synchronously ASoC: davinci-mcasp: Harmonize the sub hw_params function names ASoC: samsung: Fix trivial typo ASoC: samsung: Remove invalid dependencies ASoC: wm8993: drop regulator_bulk_free of devm_ allocated data
2014-02-19mfd: sec-core: sec_pmic_{suspend,resume}() should depend on CONFIG_PM_SLEEPGeert Uytterhoeven1-0/+2
If CONFIG_PM_SLEEP=n: drivers/mfd/sec-core.c:349: warning: ‘sec_pmic_suspend’ defined but not used drivers/mfd/sec-core.c:371: warning: ‘sec_pmic_resume’ defined but not used Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-02-19mfd: max14577: max14577_{suspend,resume}() should depend on CONFIG_PM_SLEEPGeert Uytterhoeven1-0/+2
If CONFIG_PM_SLEEP=n: drivers/mfd/max14577.c:177: warning: ‘max14577_suspend’ defined but not used drivers/mfd/max14577.c:200: warning: ‘max14577_resume’ defined but not used Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-02-19mfd: tps65217: Naturalise cross-architecture discrepanciesLee Jones1-2/+2
If we compile the TPS65217 for a 64bit architecture we receive the following warnings: drivers/mfd/tps65217.c: In function ‘tps65217_probe’: drivers/mfd/tps65217.c:173:13: warning: cast from pointer to integer of different size chip_id = (unsigned int)match->data; ^ Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-02-19mfd: wm8994-core: Naturalise cross-architecture discrepanciesLee Jones1-1/+1
If we compile the WM8994 for a 64bit architecture we receive the following warnings: drivers/mfd/wm8994-core.c: In function ‘wm8994_i2c_probe’: drivers/mfd/wm8994-core.c:639:19: warning: cast from pointer to integer of different size wm8994->type = (int)of_id->data; ^ Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-02-19mfd: max8998: Naturalise cross-architecture discrepanciesLee Jones1-3/+3
If we compile the MAX8998 for a 64bit architecture we receive the following warnings: drivers/mfd/max8998.c: In function ‘max8998_i2c_get_driver_data’: drivers/mfd/max8998.c:178:10: warning: cast from pointer to integer of different size return (int)match->data; ^ Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-02-19mfd: max8997: Naturalise cross-architecture discrepanciesLee Jones1-3/+3
If we compile the MAX8997 for a 64bit architecture we receive the following warnings: drivers/mfd/max8997.c: In function ‘max8997_i2c_get_driver_data’: drivers/mfd/max8997.c:173:10: warning: cast from pointer to integer of different size return (int)match->data; ^ Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-02-10ASoC: da9055: Fix device registration of PMIC and CODEC devicesAdam Thomson1-2/+10
Currently the I2C device Ids conflict for the MFD and CODEC so cannot be both instantiated on one platform. This patch updates the Ids and names to make them unique from each other. It should be noted that the I2C addresses for both PMIC and CODEC are modifiable so instantiation of the two are kept as separate devices, rather than instantiating the CODEC from the MFD code. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Acked-by: Mark Brown <broonie@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org> Cc: stable@vger.kernel.org
2014-01-26Merge tag 'regulator-v3.14-2' of ↵Linus Torvalds2-31/+1
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "A respin of the merges in the previous pull request with one extra fix. A quiet release for the regulator API, quite a large number of small improvements all over but other than the addition of new drivers for the AS3722 and MAX14577 there is nothing of substantial non-local impact" * tag 'regulator-v3.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (47 commits) regulator: pfuze100-regulator: Improve dev_info() message regulator: pfuze100-regulator: Fix some checkpatch complaints regulator: twl: Fix checkpatch issue regulator: core: Fix checkpatch issue regulator: anatop-regulator: Remove unneeded memset() regulator: s5m8767: Update LDO index in s5m8767-regulator.txt regulator: as3722: set enable time for SD0/1/6 regulator: as3722: detect SD0 low-voltage mode regulator: tps62360: Fix up a pointer-integer size mismatch warning regulator: anatop-regulator: Remove unneeded kstrdup() regulator: act8865: Fix build error when !OF regulator: act8865: register all regulators regardless of how many are used regulator: wm831x-dcdc: Remove unneeded 'err' label regulator: anatop-regulator: Add MODULE_ALIAS() regulator: act8865: fix incorrect devm_kzalloc for act8865 regulator: act8865: Remove set_suspend_[en|dis]able implementation regulator: act8865: Remove unneeded regulator_unregister() calls regulator: s2mps11: Clean up redundant code regulator: tps65910: Simplify setting enable_mask for regulators regulator: act8865: add device tree binding doc ...
2014-01-24drivers/mfd/tps65217.c: fix pointer-integer size mismatch warning in ↵David Howells1-1/+1
tps65217_probe() Fix up the following pointer-integer size mismatch warning in tps65217_probe(): drivers/mfd/tps65217.c: In function 'tps65217_probe': drivers/mfd/tps65217.c:173:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] chip_id = (unsigned int)match->data; ^ Signed-off-by: David Howells <dhowells@redhat.com> Cc: AnilKumar Ch <anilkumar@ti.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-24drivers/mfd/max8998.c: fix pointer-integer size mismatch warning in ↵David Howells1-1/+1
max8998_i2c_get_driver_data() Fix up the following pointer-integer size mismatch warning in max8998_i2c_get_driver_data(): drivers/mfd/max8998.c: In function 'max8998_i2c_get_driver_data': drivers/mfd/max8998.c:178:10: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] return (int)match->data; ^ Signed-off-by: David Howells <dhowells@redhat.com> Cc: Tomasz Figa <t.figa@samsung.com> Cc: Mark Brown <broonie@linaro.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23Merge remote-tracking branches 'regulator/topic/s2mps11', ↵Mark Brown1-30/+0
'regulator/topic/s5m8767', 'regulator/topic/stw481x-vmmc', 'regulator/topic/tps51632', 'regulator/topic/tps62360', 'regulator/topic/tps65910', 'regulator/topic/twl' and 'regulator/topic/wm831x' into regulator-linus
2014-01-23Merge remote-tracking branches 'regulator/topic/db8500', ↵Mark Brown1-1/+1
'regulator/topic/gpio', 'regulator/topic/lp3971', 'regulator/topic/lp3972', 'regulator/topic/max14577', 'regulator/topic/max77693', 'regulator/topic/mc13892', 'regulator/topic/pcf50633' and 'regulator/topic/pfuze100' into regulator-linus
2014-01-21Merge tag 'mfd-3.14-1' of git://git.linaro.org/people/ljones/mfdLinus Torvalds72-515/+944
Pull MFD changes from Lee Jones: "New drivers - Samsung Maxim 14577; Micro USB, Regulator, IRQ Controller and Battery Charger - TI/National Semiconductor LP3943 I2C GPIO Expander and PWM Generator Existing driver adaptions - Expansion of Wolfson Arizona DSP and High-Pass filter controls - TI TWL6040 default Regmap support and Regcache addition/bypass - Some nice Smatch catch fixes - Conversion of TI OMAP-USB and TI TWL6030 to endian neutralness - ChromeOS EC timing (delay) adaptions and added dependency on OF - Many constifications of 'struct {mfd_cell,regmap_irq,et.al}' - Watchdog support added for NVIDIA AS3722 - Convert functions to static in TI AM335x - Realigned previously defeated functionality in TI AM335x - IIO ADC-TSC concurrency dead-lock/timeout resolution - Addition of Power Management and Clock support for Samsung core - DEFINE_PCI_DEVICE_TABLE macro removal from MFD Subsystem - Greater use of irqdomain functionality in ST-E AB8500 - Removal of 'include/linux/mfd/abx500/ab8500-gpio.h' - Wolfson WM831x PMIC Power Management changes s/poweroff/shutdown/ - Device Tree documentation added for TI/Nat Semi LP3943 - Version detection and voltage tables for TI TPS6586x PMIC devices - Simplification of Freescale MC13XXX (de-)initialisation routines - Clean-up and simplification of the Realtek parent driver - Added support for RTL8402 Realtek PCI-Express card reader - Resource leak fix for Maxim 77686 - Possible suspend BUG() fix in OMAP USB TLL - Support for new Wolfson WM5110 Revision (D) - Testing of automatic assignment of of_node in mfd_add_device() - Reversion of the above when it started to cause issues - Remove legacy Platform Data from; TI TWL Core, Qualcomm SSBI and ST-E ABx500 Pinctrl - Clean-ups; tabbing issues, function name changes, 'drvdata = NULL' removal, unused uninitialised warning mitigation, error message clarity, removal of redundant/duplicate checks, licensing (GPL -> GPL2), coding consistency, duplicate function declaration, ret checks, commit corrections, redundant of_match_ptr() helper removal, spelling, #if-deffery removal and header guards name changes" * tag 'mfd-3.14-1' of git://git.linaro.org/people/ljones/mfd: (78 commits) mfd: wm5110: Add register patch for rev D chip mfd: omap-usb-tll: Don't hold lock during pm_runtime_get/put_sync() gpio: lp3943: Remove redundant of_match_ptr helper mfd: sta2x11-mfd: Use named constants for pci_power_t values Documentation: mfd: Fix LDO index in s2mps11.txt mfd: Cleanup mfd-mcp-sa11x0.h header mfd: max8997: Use "IS_ENABLED(CONFIG_OF)" for DT code. mfd: twl6030: Fix endianness problem in IRQ handler mfd: sec-core: Add cells for S5M8767-clocks mfd: max14577: Remove redundant of_match_ptr helper mfd: twl6040: Fix sparse non static symbol warning mfd: Revert "mfd: Always assign of_node in mfd_add_device()" mfd: rtsx: Fix sparse non static symbol warning mfd: max77693: Set proper maximum register for MUIC regmap mfd: max77686: Fix regmap resource leak on driver remove mfd: Represent correct filenames in file headers mfd: rtsx: Add support for card reader rtl8402 mfd: rtsx: Add set pull control macro and simplify rtl8411 mfd: max8997: Enforce mfd_add_devices() return value check mfd: mc13xxx: Simplify probe() & remove() ...
2014-01-21mfd: wm5110: Add register patch for rev D chipCharles Keepax1-1/+29
Evaluation of revision D of WM5110 suggests updates to the register patch for optimal performance. For the sake of clarity rev C of the chip does not require a register patch. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: omap-usb-tll: Don't hold lock during pm_runtime_get/put_sync()Roger Quadros1-24/+12
pm_runtime_get/put_sync() can sleep so don't hold spinlock while calling them. This patch prevents a BUG() during system suspend when CONFIG_DEBUG_ATOMIC_SLEEP is enabled. Bug is present in Kernel versions v3.9 onwards. Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: sta2x11-mfd: Use named constants for pci_power_t valuesJulia Lawall1-1/+1
If nothing more than to improve code readability. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression pdev; @@ pci_set_power_state(pdev, - 0 + PCI_D0 ) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: max8997: Use "IS_ENABLED(CONFIG_OF)" for DT code.Manish Badarkhe1-12/+2
Instead of "#if define CONFIG_OF" use "IS_ENABLED(CONFIG_OF)" option for DT code to avoid if-deffery in code. Signed-off-by: Manish Badarkhe <badarkhe.manish@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: twl6030: Fix endianness problem in IRQ handlerDanke Xie1-3/+5
The current TWL 6030 IRQ handler assumes little endianness. This change makes it endian-neutral. Signed-off-by: Danke Xie <d.xie@sta.samsung.com> Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: sec-core: Add cells for S5M8767-clocksTushar Behera1-1/+3
S5M8767 chip has 3 crystal oscillators running at 32KHz. These are supported by s2mps11-clk driver. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: max14577: Remove redundant of_match_ptr helperSachin Kamat1-1/+1
'max14577_dt_match' is always compiled in. Hence the helper macro is not needed. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: twl6040: Fix sparse non static symbol warningWei Yongjun1-1/+1
Fixes the following sparse warning: drivers/mfd/twl6040.c:89:20: warning: symbol 'twl6040_patch' was not declared. Should it be static? Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: Revert "mfd: Always assign of_node in mfd_add_device()"Lee Jones1-2/+0
This reverts commit 68044bee13770918e0b28dd44aa98c889ec7558f. We've had confirmed reports of this patch causing unforeseen issues with existing MFD users. It has been agreed by the original author and myself that reversion is the best solution. Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: rtsx: Fix sparse non static symbol warningWei Yongjun1-1/+1
Fixes the following sparse warning: drivers/mfd/rtl8411.c:473:6: warning: symbol 'rtl8411_init_common_params' was not declared. Should it be static? Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: max77693: Set proper maximum register for MUIC regmapKrzysztof Kozlowski1-1/+7
The MUIC block in max77693 has different I2C address than PMIC. The driver allocated two regmaps: for PMIC and MUIC. However it used the same regmap_config (with max_register field) for both regmaps. Actual maximum address of register for MUIC is different than for PMIC. Define another regmap_config for MUIC with proper max_register value. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: max77686: Fix regmap resource leak on driver removeKrzysztof Kozlowski1-1/+1
The regmap used by max77686 MFD driver was not freed with regmap_exit() on driver exit. This lead to leak of resources. Replace regmap_init_i2c() call in driver probe with initialization of managed register map so the regmap will be properly freed by the device management code. Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: rtsx: Add support for card reader rtl8402Micky Ching3-4/+46
rtl8402 is much like rtl8411, so just add it to rtl8411.c Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: rtsx: Add set pull control macro and simplify rtl8411Micky Ching2-40/+21
Add set pull control macro to reduce code for setting pull control, and use a common init function to reduce code for rtl8411.c. So this patch is used to just simplify code. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: max8997: Enforce mfd_add_devices() return value checkLaszlo Papp1-4/+5
The original author provided a random return value check which is redundant and seemingly floating. This patch not only relocates the check so it is more clearly associated with the invokation of mfd_add_devices(), but provides a store for the error value. We also print a meaningful message on error before returning. Signed-off-by: Laszlo Papp <lpapp@kde.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: mc13xxx: Simplify probe() & remove()Alexander Shiyan4-50/+29
This patch simplifies probe() and remove() functions by moving some initialisation code out from the I2C/SPI init() and exit() functions and into the core driver. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: mc13xxx: Remove useless symbol MFD_MC13783Alexander Shiyan1-4/+0
Symbol MFD_MC13783 always selected by MFD_MC13XXX, so no need to keep additional symbol. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: ssbi: Mark match table constStephen Boyd1-1/+1
This is a read-only data structure. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: ssbi: Constify buffer in ssbi_writeStephen Boyd1-4/+4
In preparation for passing a const pointer directly to ssbi_write() from the regmap APIs. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: ssbi: Remove platform data structs and hide ssbi type enumStephen Boyd1-0/+6
The ssbi driver assumes that the device is DT based. Remove the platform data structs that will never be used and hide the enum in the only C file that uses it. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: Always assign of_node in mfd_add_device()Stephen Warren1-0/+2
mfd_add_device() assigns .of_node in the device objects it creates only if the mfd_cell for the device has the .of_compatible field set and the DT node for the top-level MFD device contains a child whose compatible property matches the cell's .of_compatible field. This leaves .of_node unset in many cases. When this happens, entries in the DT /aliases property which refer to the top-level MFD DT node will never match the MFD child devices, hence causing the requested alias not to be honored. Solve this by setting each MFD child device's .of_node equal to the top- level MFD device's .of_node field in the cases where it would otherwise remain unset. The first use-case for this will be aliases for the TPS6586x's RTC device. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: cros ec: spi: Add delay for raising CSRhyland Klein1-0/+29
The EC has specific timing it requires. Add support for an optional delay after raising CS to fix timing issues. This is configurable based on a DT property "google,cros-ec-spi-msg-delay". If this property isn't set, then no delay will be added. However, if set it will cause a delay equal to the value passed to it to be inserted at the end of a transaction. Signed-off-by: Rhyland Klein <rklein@nvidia.com> Reviewed-by: Bernie Thompson <bhthompson@chromium.org> Reviewed-by: Andrew Bresticker <abrestic@chromium.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: cros ec: spi: Use 0 instead of '\0' consistentlyThierry Reding1-3/+3
memset() was being called with the second parameter set to '\0', which is equivalent but longer than the more canonical 0. Update the code to use the latter variant consistently across the driver. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: cros ec: spi: Depend on OFThierry Reding1-1/+1
The driver is not used on any non-DT platform, so it can depend on the OF Kconfig symbol to make that explicit. This is in preparation of a subsequent patch which parses some parameters from the device tree and would otherwise have to conditionalize that code. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: cros ec: spi: Use correct module licenseThierry Reding1-1/+1
According to the header comment in the source file the driver is licensed under GPL v2, so update MODULE_LICENSE() to match that. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-21mfd: sec-core: Fix sparse NULL pointer warningWei Yongjun1-1/+1
Fixes the following sparse warning: drivers/mfd/sec-core.c:202:16: warning: Using plain integer as NULL pointer Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Lee Jones <lee.jones@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-16 03:32:12 +0300