summaryrefslogtreecommitdiff
path: root/drivers/mfd
AgeCommit message (Collapse)AuthorFilesLines
2019-01-23mfd: tps6586x: Handle interrupts on suspendJonathan Hunter1-0/+24
commit ac4ca4b9f4623ba5e1ea7a582f286567c611e027 upstream. The tps6586x driver creates an irqchip that is used by its various child devices for managing interrupts. The tps6586x-rtc device is one of its children that uses the tps6586x irqchip. When using the tps6586x-rtc as a wake-up device from suspend, the following is seen: PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.001 seconds) done. OOM killer disabled. Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. Disabling non-boot CPUs ... Entering suspend state LP1 Enabling non-boot CPUs ... CPU1 is up tps6586x 3-0034: failed to read interrupt status tps6586x 3-0034: failed to read interrupt status The reason why the tps6586x interrupt status cannot be read is because the tps6586x interrupt is not masked during suspend and when the tps6586x-rtc interrupt occurs, to wake-up the device, the interrupt is seen before the i2c controller has been resumed in order to read the tps6586x interrupt status. The tps6586x-rtc driver sets it's interrupt as a wake-up source during suspend, which gets propagated to the parent tps6586x interrupt. However, the tps6586x-rtc driver cannot disable it's interrupt during suspend otherwise we would never be woken up and so the tps6586x must disable it's interrupt instead. Prevent the tps6586x interrupt handler from executing on exiting suspend before the i2c controller has been resumed by disabling the tps6586x interrupt on entering suspend and re-enabling it on resuming from suspend. Cc: stable@vger.kernel.org Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-18mfd: omap-usb-host: Fix dts probe of childrenTony Lindgren1-5/+6
[ Upstream commit 10492ee8ed9188d6d420e1f79b2b9bdbc0624e65 ] It currently only works if the parent bus uses "simple-bus". We currently try to probe children with non-existing compatible values. And we're missing .probe. I noticed this while testing devices configured to probe using ti-sysc interconnect target module driver. For that we also may want to rebind the driver, so let's remove __init and __exit. Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26mfd: 88pm860x-i2c: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT)Peter Rosin1-4/+4
[ Upstream commit 8c8f74f327a76604a499fad8c54c15e1c0ee8051 ] Locking the root adapter for __i2c_transfer will deadlock if the device sits behind a mux-locked I2C mux. Switch to the finer-grained i2c_lock_bus with the I2C_LOCK_SEGMENT flag. If the device does not sit behind a mux-locked mux, the two locking variants are equivalent. Signed-off-by: Peter Rosin <peda@axentia.se> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-19mfd: ti_am335x_tscadc: Fix struct clk memory leakZumeng Chen1-2/+1
[ Upstream commit c2b1509c77a99a0dcea0a9051ca743cb88385f50 ] Use devm_elk_get() to let Linux manage struct clk memory to avoid the following memory leakage report: unreferenced object 0xdd75efc0 (size 64): comm "systemd-udevd", pid 186, jiffies 4294945126 (age 1195.750s) hex dump (first 32 bytes): 61 64 63 5f 74 73 63 5f 66 63 6b 00 00 00 00 00 adc_tsc_fck..... 00 00 00 00 92 03 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<c0a15260>] kmemleak_alloc+0x40/0x74 [<c0287a10>] __kmalloc_track_caller+0x198/0x388 [<c0255610>] kstrdup+0x40/0x5c [<c025565c>] kstrdup_const+0x30/0x3c [<c0636630>] __clk_create_clk+0x60/0xac [<c0630918>] clk_get_sys+0x74/0x144 [<c0630cdc>] clk_get+0x5c/0x68 [<bf0ac540>] ti_tscadc_probe+0x260/0x468 [ti_am335x_tscadc] [<c06f3c0c>] platform_drv_probe+0x60/0xac [<c06f1abc>] driver_probe_device+0x214/0x2dc [<c06f1c18>] __driver_attach+0x94/0xc0 [<c06efe2c>] bus_for_each_dev+0x90/0xa0 [<c06f1470>] driver_attach+0x28/0x30 [<c06f1030>] bus_add_driver+0x184/0x1ec [<c06f2b74>] driver_register+0xb0/0xf0 [<c06f3b4c>] __platform_driver_register+0x40/0x54 Signed-off-by: Zumeng Chen <zumeng.chen@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-15mfd: sm501: Set coherent_dma_mask when creating subdevicesGuenter Roeck1-0/+1
[ Upstream commit 2f606da78230f09cf1a71fde6ee91d0c710fa2b2 ] Instantiating the sm501 OHCI subdevice results in a kernel warning. sm501-usb sm501-usb: SM501 OHCI sm501-usb sm501-usb: new USB bus registered, assigned bus number 1 WARNING: CPU: 0 PID: 1 at ./include/linux/dma-mapping.h:516 ohci_init+0x194/0x2d8 Modules linked in: CPU: 0 PID: 1 Comm: swapper Tainted: G W 4.18.0-rc7-00178-g0b5b1f9a78b5 #1 PC is at ohci_init+0x194/0x2d8 PR is at ohci_init+0x168/0x2d8 PC : 8c27844c SP : 8f81dd94 SR : 40008001 TEA : 29613060 R0 : 00000000 R1 : 00000000 R2 : 00000000 R3 : 00000202 R4 : 8fa98b88 R5 : 8c277e68 R6 : 00000000 R7 : 00000000 R8 : 8f965814 R9 : 8c388100 R10 : 8fa98800 R11 : 8fa98928 R12 : 8c48302c R13 : 8fa98920 R14 : 8c48302c MACH: 00000096 MACL: 0000017c GBR : 00000000 PR : 8c278420 Call trace: [<(ptrval)>] usb_add_hcd+0x1e8/0x6ec [<(ptrval)>] _dev_info+0x0/0x54 [<(ptrval)>] arch_local_save_flags+0x0/0x8 [<(ptrval)>] arch_local_irq_restore+0x0/0x24 [<(ptrval)>] ohci_hcd_sm501_drv_probe+0x114/0x2d8 ... Initialize coherent_dma_mask when creating SM501 subdevices to fix the problem. Fixes: b6d6454fdb66f ("mfd: SM501 core driver") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-09mfd: hi655x: Fix regmap area declared size for hi655xRafael David Tinoco1-1/+1
commit 6afebb70ee7a4bde106dc1a875e7ac7997248f84 upstream. Fixes https://bugs.linaro.org/show_bug.cgi?id=3903 LTP Functional tests have caused a bad paging request when triggering the regmap_read_debugfs() logic of the device PMIC Hi6553 (reading regmap/f8000000.pmic/registers file during read_all test): Unable to handle kernel paging request at virtual address ffff0 [ffff00000984e000] pgd=0000000077ffe803, pud=0000000077ffd803,0 Internal error: Oops: 96000007 [#1] SMP ... Hardware name: HiKey Development Board (DT) ... Call trace: regmap_mmio_read8+0x24/0x40 regmap_mmio_read+0x48/0x70 _regmap_bus_reg_read+0x38/0x48 _regmap_read+0x68/0x170 regmap_read+0x50/0x78 regmap_read_debugfs+0x1a0/0x308 regmap_map_read_file+0x48/0x58 full_proxy_read+0x68/0x98 __vfs_read+0x48/0x80 vfs_read+0x94/0x150 SyS_read+0x6c/0xd8 el0_svc_naked+0x30/0x34 Code: aa1e03e0 d503201f f9400280 8b334000 (39400000) Investigations have showed that, when triggered by debugfs read() handler, the mmio regmap logic was reading a bigger (16k) register area than the one mapped by devm_ioremap_resource() during hi655x-pmic probe time (4k). This commit changes hi655x's max register, according to HW specs, to be the same as the one declared in the pmic device in hi6220's dts, fixing the issue. Cc: <stable@vger.kernel.org> #v4.9 #v4.14 #v4.16 #v4.17 Signed-off-by: Rafael David Tinoco <rafael.tinoco@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-08-03mfd: cros_ec: Fail early if we cannot identify the ECVincent Palatin1-1/+5
[ Upstream commit 0dbbf25561b29ffab5ba6277429760abdf49ceff ] If we cannot communicate with the EC chip to detect the protocol version and its features, it's very likely useless to continue. Else we will commit all kind of uninformed mistakes (using the wrong protocol, the wrong buffer size, mixing the EC with other chips). Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Acked-by: Benson Leung <bleung@chromium.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-03mfd: intel-lpss: Program REMAP register in PIO modeAndy Shevchenko1-2/+2
commit d28b62520830b2d0bffa2d98e81afc9f5e537e8b upstream. According to documentation REMAP register has to be programmed in either DMA or PIO mode of the slice. Move the DMA capability check below to let REMAP register be programmed in PIO mode. Cc: stable@vger.kernel.org # 4.3+ Fixes: 4b45efe85263 ("mfd: Add support for Intel Sunrisepoint LPSS devices") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24mfd: palmas: Reset the POWERHOLD mux during power offKeerthy1-0/+14
[ Upstream commit 85fdaf8eb9bbec1f0f8a52fd5d85659d60738816 ] POWERHOLD signal has higher priority over the DEV_ON bit. So power off will not happen if the POWERHOLD is held high. Hence reset the MUX to GPIO_7 mode to release the POWERHOLD and the DEV_ON bit to take effect to power off the PMIC. PMIC Power off happens in dire situations like thermal shutdown so irrespective of the POWERHOLD setting go ahead and turn off the powerhold. Currently poweroff is broken on boards that have powerhold enabled. This fixes poweroff on those boards. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-29mfd: twl6040: Fix child-node lookupJohan Hovold1-4/+8
commit 85e9b13cbb130a3209f21bd7933933399c389ffe upstream. Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent node was prematurely freed, while the child node was leaked. Note that the CONFIG_OF compile guard can be removed as of_get_child_by_name() provides a !CONFIG_OF implementation which always fails. Fixes: 37e13cecaa14 ("mfd: Add support for Device Tree to twl6040") Fixes: ca2cad6ae38e ("mfd: Fix twl6040 build failure") Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-29mfd: twl4030-audio: Fix sibling-node lookupJohan Hovold1-2/+7
commit 0a423772de2f3d7b00899987884f62f63ae00dcb upstream. A helper purported to look up a child node based on its name was using the wrong of-helper and ended up prematurely freeing the parent of-node while leaking any matching node. To make things worse, any matching node would not even necessarily be a child node as the whole device tree was searched depth-first starting at the parent. Fixes: 019a7e6b7b31 ("mfd: twl4030-audio: Add DT support") Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-29mfd: cros ec: spi: Don't send first message too soonJon Hunter1-0/+1
commit 15d8374874ded0bec37ef27f8301a6d54032c0e5 upstream. On the Tegra124 Nyan-Big chromebook the very first SPI message sent to the EC is failing. The Tegra SPI driver configures the SPI chip-selects to be active-high by default (and always has for many years). The EC SPI requires an active-low chip-select and so the Tegra chip-select is reconfigured to be active-low when the EC SPI driver calls spi_setup(). The problem is that if the first SPI message to the EC is sent too soon after reconfiguring the SPI chip-select, it fails. The EC SPI driver prevents back-to-back SPI messages being sent too soon by keeping track of the time the last transfer was sent via the variable 'last_transfer_ns'. To prevent the very first transfer being sent too soon, initialise the 'last_transfer_ns' variable after calling spi_setup() and before sending the first SPI message. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Acked-by: Benson Leung <bleung@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-20mfd: fsl-imx25: Clean up irq settings during removalMartin Kaiser1-0/+14
commit 18f77393796848e68909e65d692c1d1436f06e06 upstream. When fsl-imx25-tsadc is compiled as a module, loading, unloading and reloading the module will lead to a crash. Unable to handle kernel paging request at virtual address bf005430 [<c004df6c>] (irq_find_matching_fwspec) from [<c028d5ec>] (of_irq_get+0x58/0x74) [<c028d594>] (of_irq_get) from [<c01ff970>] (platform_get_irq+0x48/0xc8) [<c01ff928>] (platform_get_irq) from [<bf00e33c>] (mx25_tsadc_probe+0x220/0x2f4 [fsl_imx25_tsadc]) irq_find_matching_fwspec() loops over all registered irq domains. The irq domain is still registered from last time the module was loaded but the pointer to its operations is invalid after the module was unloaded. Add a removal function which clears the irq handler and removes the irq domain. With this cleanup in place, it's possible to unload and reload the module. Signed-off-by: Martin Kaiser <martin@kaiser.cx> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-12-05mfd: twl4030-power: Fix pmic for boards that need vmmc1 on rebootAdam Ford1-0/+1
commit ad48ed0c5763dc08931407e455dff5acdbe96e81 upstream. At least two different omap3630/3730 boards booting from MMC1 fail to reboot if the "ti,twl4030-power-idle-osc-off" or "ti,twl4030-power-idle" compatible flags are set. This patch will keep the vmmc1 powered up during reboot allowing the bootloader to load. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-08mfd: axp20x: Fix axp288 PEK_DBR and PEK_DBF irqs being swappedHans de Goede1-4/+4
[ Upstream commit 1af468ebe45591651ec3bafc2e9ddc6fdef70ae0 ] The R in PEK_DBR stands for rising, so it should be mapped to AXP288_IRQ_POKP where the last P stands for positive edge. Likewise PEK_DBF should be mapped to the falling edge, aka the _N_egative edge, so it should be mapped to AXP288_IRQ_POKN. This fixes the inverted powerbutton status reporting by the axp20x-pek driver. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-08mfd: ab8500-sysctrl: Handle probe deferralLinus Walleij1-3/+11
[ Upstream commit 7e9c40c63933a643908d686bd89dfc2315e8c70a ] In the current boot, clients making use of the AB8500 sysctrl may be probed before the ab8500-sysctrl driver. This gives them -EINVAL, but should rather give -EPROBE_DEFER. Before this, the abx500 clock driver didn't probe properly, and as a result the codec driver in turn using the clocks did not probe properly. After this patch, everything probes properly. Also add OF compatible-string probing. This driver is all device tree, so let's just make a drive-by-fix of that as well. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Sasha Levin <alexander.levin@verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-24mfd: omap-usb-tll: Fix inverted bit use for USB TLL modeTony Lindgren1-1/+1
commit 8b8a84c54aff4256d592dc18346c65ecf6811b45 upstream. Commit 16fa3dc75c22 ("mfd: omap-usb-tll: HOST TLL platform driver") added support for USB TLL, but uses OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF bit the wrong way. The comments in the code are correct, but the inverted use of OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF causes the register to be enabled instead of disabled unlike what the comments say. Without this change the Wrigley 3G LTE modem on droid 4 EHCI bus can be only pinged few times before it stops responding. Fixes: 16fa3dc75c22 ("mfd: omap-usb-tll: HOST TLL platform driver") Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-12mfd: tps65217: Fix page fault on unloading modulesMilo Kim1-0/+19
commit 40a50f8b307de8d08f3fa37c312fc16a7dd233e5 upstream. TPS65217 IRQ domain should be removed and initialised as NULL when the module is unloaded for the next use. When tps65217.ko is loaded again, it causes the page fault. This patch fixes the error below. root@arm:~# lsmod | grep "tps" tps65217_charger 3538 0 tps65218_pwrbutton 2974 0 tps65217 6710 1 tps65217_charger root@arm:~# modprobe -r tps65217_charger root@arm:~# modprobe tps65217.ko [ 71.990277] Unable to handle kernel paging request at virtual address bf055944 [ 71.998063] pgd = dd3a4000 [ 72.000904] [bf055944] *pgd=9e6f7811, *pte=00000000, *ppte=00000000 [ 72.007567] Internal error: Oops: 7 [#1] SMP ARM [ 72.012404] Modules linked in: tps65217(+) evdev musb_dsps musb_hdrc udc_core tps65218_pwrbutton usbcore phy_am335] [ 72.055700] CPU: 0 PID: 243 Comm: modprobe Not tainted 4.9.0-rc5-next-20161114 #3 [ 72.063531] Hardware name: Generic AM33XX (Flattened Device Tree) [ 72.069899] task: de714380 task.stack: de7e6000 [ 72.074655] PC is at irq_find_matching_fwspec+0x88/0x100 [ 72.080211] LR is at 0xde7e79d8 [ 72.083496] pc : [<c01a5d88>] lr : [<de7e79d8>] psr: 200e0013 [ 72.083496] sp : de7e7a78 ip : 00000000 fp : dd138a68 [ 72.095506] r10: c0ca04f8 r9 : 00000018 r8 : de7e7ab8 [ 72.100973] r7 : 00000001 r6 : c0c4517c r5 : df963f68 r4 : de321980 [ 72.107797] r3 : bf055940 r2 : de714380 r1 : 00000000 r0 : 00000000 [ 72.114633] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 72.122084] Control: 10c5387d Table: 9d3a4019 DAC: 00000051 [ 72.128097] Process modprobe (pid: 243, stack limit = 0xde7e6218) [ 72.134489] Stack: (0xde7e7a78 to 0xde7e8000) [ 72.139060] 7a60: df963f68 de7e7ab8 [ 72.147643] 7a80: 00000000 dd0e1000 dd491e20 c01a6ea0 600e0013 c01a5dc0 dd138a68 c0c45138 [ 72.156216] 7aa0: df963f68 00000000 df963f68 dd0e1010 00000000 c01a71a4 df963f68 00000001 [ 72.164800] 7ac0: 00000002 de7e7ac0 c80048b8 dd0adf00 df963f68 c0c4517c 00000000 de7e7b50 [ 72.173369] 7ae0: 00000018 c0ca04f8 dd138a68 c01a5dc0 df963f68 dd0e1010 00000000 dd0e1000 [ 72.181942] 7b00: dd491e20 c0653a70 df963f58 00000001 00000002 00000000 00000000 00000000 [ 72.190522] 7b20: 600e0093 c0cbf8f0 c0c0512c c0193674 00000001 00000080 00000000 c0554984 [ 72.199096] 7b40: 00000000 00000000 800e0013 c0553858 df963f68 00000000 00000000 00000000 [ 72.207674] 7b60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 72.216239] 7b80: 00000000 00000000 00000000 00000000 00000000 00000000 dd0e1000 c0544d24 [ 72.224816] 7ba0: dd491e10 dd0e1010 dd16e800 bf1d517c bf1d5620 dd0e1010 c1497ed4 bf1d5620 [ 72.233398] 7bc0: dd0e1010 fffffdfb bf1d5620 bf1d5620 00000000 c054537c c0545330 dd0e1010 [ 72.241967] 7be0: c1497ed4 00000000 bf1d5620 c05433ac 00000000 00000000 de7e7c28 c0543570 [ 72.250537] 7c00: 00000001 c1497e90 00000000 c0541884 de080cd4 dd44b7d4 dd0e1010 dd0e1010 [ 72.259109] 7c20: dd0e1044 c05430c8 dd0e1010 00000001 dd0e1010 dd0e1018 dd0e1010 c0c9e328 [ 72.267676] 7c40: de5d4020 c0542760 dd0e1018 dd0e1010 00000000 c0540ba8 dd138a40 c048dec4 [ 72.276253] 7c60: 00000000 dd0e1000 00000001 dd0e1000 dd0e1010 dd0e1000 bf233de0 dd138a40 [ 72.284829] 7c80: dd0e1010 c05450a0 000000bf 00000000 dd138a60 00000001 dd0e1000 c0571240 [ 72.293398] 7ca0: 00000000 dd1ce9c0 00000040 dd1ce9cc bf233de0 00000003 de5d4020 ffffffff [ 72.301969] 7cc0: 00000004 dd0adf00 00000000 c0571408 00000000 00000000 dd0adf00 de5d4020 [ 72.310543] 7ce0: c057146c dd1ce9c0 bf233d14 de5d4020 de7fb3d0 00000004 bf233d14 ffffffff [ 72.319120] 7d00: 00000018 dd49bf30 c01cedc0 c05714d0 00000000 00000000 dd0adf00 de322810 [ 72.327692] 7d20: de322810 00000000 dd033000 000000f0 00000001 bf2333fc 00000000 00000000 [ 72.336269] 7d40: dd0adf00 de5d4020 000000b6 bf233e40 de5d4020 bf233968 de5d4004 de5d4000 [ 72.344848] 7d60: bf233314 c06148ac de5d4020 c1497ed4 00000000 bf233e40 00000000 c05433ac [ 72.353422] 7d80: 00000000 de5d4020 bf233e40 de5d4054 00000000 bf236000 00000000 c0543538 [ 72.362002] 7da0: 00000000 bf233e40 c0543484 c05417e4 de1442a4 de5d04d0 bf233e40 de321300 [ 72.370582] 7dc0: c0caa5a4 c05429fc bf233be0 bf233e40 c0cbfa44 bf233e40 c0cbfa44 dd2f7740 [ 72.379148] 7de0: bf233f00 c05442f0 bf233e8c bf233e24 c0cbfa44 c0615ae0 00000000 bf233f00 [ 72.387718] 7e00: c0cbfa44 c010186c 200f0013 c0191650 de714380 00000000 600f0013 00000040 [ 72.396286] 7e20: dd2f7740 c018f1ac 00000001 c0c8356c 024000c0 c01a8854 c0c56e0e c028225c [ 72.404863] 7e40: dd2f7740 c0191984 de714380 dd2f7740 00000001 bf233f00 bf233f00 c0cbfa44 [ 72.413440] 7e60: dd2f7740 bf233f00 00000001 dd49bf08 dd49bf30 c0230998 00000001 c0c8356c [ 72.421997] 7e80: c0c4c536 c0cbfa44 c0c0512c c01d2070 bf233f0c 00007fff bf233f00 c01cf5b8 [ 72.430570] 7ea0: 00000000 c1475134 c01cee34 bf23411c bf233f48 bf234054 bf234150 00000000 [ 72.439144] 7ec0: 024002c2 de7fbf40 0009bc20 c02776ac ff800000 00000000 00000000 bf233670 [ 72.447723] 7ee0: 00000004 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 72.456298] 7f00: 00000000 00000000 00000000 00000000 c01d2590 0000aa41 00000000 00000000 [ 72.464862] 7f20: 000b2549 e12c3a41 00000051 de7e6000 0009bc20 c01d2630 00000530 e12b9000 [ 72.473438] 7f40: 0000aa41 e12c1434 e12c1211 e12c336c 00001150 00001620 00000000 00000000 [ 72.482003] 7f60: 00000000 000010fc 00000035 00000036 0000001d 0000001a 00000017 00000000 [ 72.490564] 7f80: de7e6000 3ba39a00 0009b008 0009b718 00000080 c0107704 de7e6000 00000000 [ 72.499141] 7fa0: 0009f609 c0107560 3ba39a00 0009b008 000a7b08 0000aa41 0009bc20 0000aa41 [ 72.507717] 7fc0: 3ba39a00 0009b008 0009b718 00000080 00000001 00000008 0009ab14 0009f609 [ 72.516290] 7fe0: bea31ab8 bea31aa8 0001e5eb b6e83b42 800f0030 000a7b08 0000ffff 0840ffff [ 72.524883] [<c01a5d88>] (irq_find_matching_fwspec) from [<c01a6ea0>] (irq_create_fwspec_mapping+0x28/0x2e0) [ 72.535174] [<c01a6ea0>] (irq_create_fwspec_mapping) from [<c01a71a4>] (irq_create_of_mapping+0x4c/0x54) [ 72.545115] [<c01a71a4>] (irq_create_of_mapping) from [<c0653a70>] (of_irq_get+0x58/0x68) [ 72.553699] [<c0653a70>] (of_irq_get) from [<c0544d24>] (platform_get_irq+0x1c/0xec) [ 72.561828] [<c0544d24>] (platform_get_irq) from [<bf1d517c>] (tps6521x_pb_probe+0xd0/0x1a8 [tps65218_pwrbutton]) [ 72.572581] [<bf1d517c>] (tps6521x_pb_probe [tps65218_pwrbutton]) from [<c054537c>] (platform_drv_probe+0x4c/0xac) [ 72.583426] [<c054537c>] (platform_drv_probe) from [<c05433ac>] (driver_probe_device+0x204/0x2dc) [ 72.592729] [<c05433ac>] (driver_probe_device) from [<c0541884>] (bus_for_each_drv+0x58/0x8c) [ 72.601657] [<c0541884>] (bus_for_each_drv) from [<c05430c8>] (__device_attach+0xb0/0x114) [ 72.610324] [<c05430c8>] (__device_attach) from [<c0542760>] (bus_probe_device+0x88/0x90) [ 72.618898] [<c0542760>] (bus_probe_device) from [<c0540ba8>] (device_add+0x3b8/0x560) [ 72.627203] [<c0540ba8>] (device_add) from [<c05450a0>] (platform_device_add+0xa8/0x208) [ 72.635693] [<c05450a0>] (platform_device_add) from [<c0571240>] (mfd_add_device+0x240/0x338) [ 72.644634] [<c0571240>] (mfd_add_device) from [<c0571408>] (mfd_add_devices+0xa0/0x104) [ 72.653120] [<c0571408>] (mfd_add_devices) from [<c05714d0>] (devm_mfd_add_devices+0x60/0xa8) [ 72.662077] [<c05714d0>] (devm_mfd_add_devices) from [<bf2333fc>] (tps65217_probe+0xe8/0x2ec [tps65217]) [ 72.672026] [<bf2333fc>] (tps65217_probe [tps65217]) from [<c06148ac>] (i2c_device_probe+0x168/0x1f4) [ 72.681695] [<c06148ac>] (i2c_device_probe) from [<c05433ac>] (driver_probe_device+0x204/0x2dc) [ 72.690816] [<c05433ac>] (driver_probe_device) from [<c0543538>] (__driver_attach+0xb4/0xb8) [ 72.699657] [<c0543538>] (__driver_attach) from [<c05417e4>] (bus_for_each_dev+0x60/0x94) [ 72.708224] [<c05417e4>] (bus_for_each_dev) from [<c05429fc>] (bus_add_driver+0x18c/0x214) [ 72.716892] [<c05429fc>] (bus_add_driver) from [<c05442f0>] (driver_register+0x78/0xf8) [ 72.725280] [<c05442f0>] (driver_register) from [<c0615ae0>] (i2c_register_driver+0x38/0x80) [ 72.734120] [<c0615ae0>] (i2c_register_driver) from [<c010186c>] (do_one_initcall+0x3c/0x178) [ 72.743055] [<c010186c>] (do_one_initcall) from [<c0230998>] (do_init_module+0x5c/0x1d0) [ 72.751537] [<c0230998>] (do_init_module) from [<c01d2070>] (load_module+0x1d10/0x21c0) [ 72.759933] [<c01d2070>] (load_module) from [<c01d2630>] (SyS_init_module+0x110/0x154) [ 72.768242] [<c01d2630>] (SyS_init_module) from [<c0107560>] (ret_fast_syscall+0x0/0x1c) [ 72.776725] Code: e5944000 e1540006 0a00001b e594300c (e593c004) [ 72.783181] ---[ end trace 0278ec325f4689b8 ]--- Fixes: 6556bdacf646 ("mfd: tps65217: Add support for IRQs") Signed-off-by: Milo Kim <woogyom.kim@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-25mfd: wm8994-core: Don't use managed regulator bulk get APIViresh Kumar1-3/+11
The kernel WARNs and then crashes today if wm8994_device_init() fails after calling devm_regulator_bulk_get(). That happens because there are multiple devices involved here and the order in which managed resources are freed isn't correct. The regulators are added as children of wm8994->dev. Whereas, devm_regulator_bulk_get() receives wm8994->dev as the device, though it gets the same regulators which were added as children of wm8994->dev earlier. During failures, the children are removed first and the core eventually calls regulator_unregister() for them. As regulator_put() was never done for them (opposite of devm_regulator_bulk_get()), the kernel WARNs at WARN_ON(rdev->open_count); And eventually it crashes from debugfs_remove_recursive(). --------x------------------x---------------- wm8994 3-001a: Device is not a WM8994, ID is 0 ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at /mnt/ssd/all/work/repos/devel/linux/drivers/regulator/core.c:4072 regulator_unregister+0xc8/0xd0 Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.8.0-rc6-00154-g54fe84cbd50b #41 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [<c010e24c>] (unwind_backtrace) from [<c010af38>] (show_stack+0x10/0x14) [<c010af38>] (show_stack) from [<c032a1c4>] (dump_stack+0x88/0x9c) [<c032a1c4>] (dump_stack) from [<c011a98c>] (__warn+0xe8/0x100) [<c011a98c>] (__warn) from [<c011aa54>] (warn_slowpath_null+0x20/0x28) [<c011aa54>] (warn_slowpath_null) from [<c0384a0c>] (regulator_unregister+0xc8/0xd0) [<c0384a0c>] (regulator_unregister) from [<c0406434>] (release_nodes+0x16c/0x1dc) [<c0406434>] (release_nodes) from [<c04039c4>] (__device_release_driver+0x8c/0x110) [<c04039c4>] (__device_release_driver) from [<c0403a64>] (device_release_driver+0x1c/0x28) [<c0403a64>] (device_release_driver) from [<c0402b24>] (bus_remove_device+0xd8/0x104) [<c0402b24>] (bus_remove_device) from [<c03ffcd8>] (device_del+0x10c/0x218) [<c03ffcd8>] (device_del) from [<c0404e4c>] (platform_device_del+0x1c/0x88) [<c0404e4c>] (platform_device_del) from [<c0404ec4>] (platform_device_unregister+0xc/0x20) [<c0404ec4>] (platform_device_unregister) from [<c0428bc0>] (mfd_remove_devices_fn+0x5c/0x64) [<c0428bc0>] (mfd_remove_devices_fn) from [<c03ff9d8>] (device_for_each_child_reverse+0x4c/0x78) [<c03ff9d8>] (device_for_each_child_reverse) from [<c04288c4>] (mfd_remove_devices+0x20/0x30) [<c04288c4>] (mfd_remove_devices) from [<c042758c>] (wm8994_device_init+0x2ac/0x7f0) [<c042758c>] (wm8994_device_init) from [<c04f14a8>] (i2c_device_probe+0x178/0x1fc) [<c04f14a8>] (i2c_device_probe) from [<c04036fc>] (driver_probe_device+0x214/0x2c0) [<c04036fc>] (driver_probe_device) from [<c0403854>] (__driver_attach+0xac/0xb0) [<c0403854>] (__driver_attach) from [<c0401a74>] (bus_for_each_dev+0x68/0x9c) [<c0401a74>] (bus_for_each_dev) from [<c0402cf0>] (bus_add_driver+0x1a0/0x218) [<c0402cf0>] (bus_add_driver) from [<c040406c>] (driver_register+0x78/0xf8) [<c040406c>] (driver_register) from [<c04f20a0>] (i2c_register_driver+0x34/0x84) [<c04f20a0>] (i2c_register_driver) from [<c01017d0>] (do_one_initcall+0x40/0x170) [<c01017d0>] (do_one_initcall) from [<c0a00dbc>] (kernel_init_freeable+0x15c/0x1fc) [<c0a00dbc>] (kernel_init_freeable) from [<c06e07b0>] (kernel_init+0x8/0x114) [<c06e07b0>] (kernel_init) from [<c0107978>] (ret_from_fork+0x14/0x3c) ---[ end trace 0919d3d0bc998260 ]--- [snip..] Unable to handle kernel NULL pointer dereference at virtual address 00000078 pgd = c0004000 [00000078] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 4.8.0-rc6-00154-g54fe84cbd50b #41 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) task: ee874000 task.stack: ee878000 PC is at down_write+0x14/0x54 LR is at debugfs_remove_recursive+0x30/0x150 [snip..] [<c06e489c>] (down_write) from [<c02e9954>] (debugfs_remove_recursive+0x30/0x150) [<c02e9954>] (debugfs_remove_recursive) from [<c0382b78>] (_regulator_put+0x24/0xac) [<c0382b78>] (_regulator_put) from [<c0382c1c>] (regulator_put+0x1c/0x2c) [<c0382c1c>] (regulator_put) from [<c0406434>] (release_nodes+0x16c/0x1dc) [<c0406434>] (release_nodes) from [<c04035d4>] (driver_probe_device+0xec/0x2c0) [<c04035d4>] (driver_probe_device) from [<c0403854>] (__driver_attach+0xac/0xb0) [<c0403854>] (__driver_attach) from [<c0401a74>] (bus_for_each_dev+0x68/0x9c) [<c0401a74>] (bus_for_each_dev) from [<c0402cf0>] (bus_add_driver+0x1a0/0x218) [<c0402cf0>] (bus_add_driver) from [<c040406c>] (driver_register+0x78/0xf8) [<c040406c>] (driver_register) from [<c04f20a0>] (i2c_register_driver+0x34/0x84) [<c04f20a0>] (i2c_register_driver) from [<c01017d0>] (do_one_initcall+0x40/0x170) [<c01017d0>] (do_one_initcall) from [<c0a00dbc>] (kernel_init_freeable+0x15c/0x1fc) [<c0a00dbc>] (kernel_init_freeable) from [<c06e07b0>] (kernel_init+0x8/0x114) [<c06e07b0>] (kernel_init) from [<c0107978>] (ret_from_fork+0x14/0x3c) Code: e1a04000 f590f000 e3a03001 e34f3fff (e1902f9f) ---[ end trace 0919d3d0bc998262 ]--- --------x------------------x---------------- Fix the kernel warnings and crashes by using regulator_bulk_get() instead of devm_regulator_bulk_get() and explicitly freeing the supplies in exit paths. Tested on Exynos 5250, dual core ARM A15 machine. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-11-25mfd: wm8994-core: Disable regulators before removing themViresh Kumar1-1/+1
The order in which resources were freed in wm8994_device_exit() isn't correct. The regulators are removed before they are disabled. Fix it by reordering code a bit, which makes it exact opposite of wm8994_device_init() as well. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-11-25mfd: syscon: Support native-endian regmapsPaul Burton1-1/+3
The regmap devicetree binding documentation states that a native-endian property should be supported as well as big-endian & little-endian, however syscon in its duplication of the parsing of these properties omits support for native-endian. Fix this by setting REGMAP_ENDIAN_NATIVE when a native-endian property is found. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-11-16mfd: core: Fix device reference leak in mfd_clone_cellJohan Hovold1-0/+2
Make sure to drop the reference taken by bus_find_device_by_name() before returning from mfd_clone_cell(). Fixes: a9bbba996302 ("mfd: add platform_device sharing support for mfd") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-11-16mfd: stmpe: Fix RESET regression on STMPE2401Linus Walleij1-0/+2
Since commit c4dd1ba355aae2bc3d1213da6c66c53e3c31e028 ("mfd: stmpe: Add reset support for all STMPE variant") we're resetting the STMPE expanders before use. This caused a regression on the STMP2401 on the Nomadik NHK8815: stmpe-i2c 0-0043: stmpe2401 detected, chip id: 0x101 nmk-i2c 101f8000.i2c0: write to slave 0x43 timed out nmk-i2c 101f8000.i2c0: no ack received after address transmission stmpe-i2c 0-0044: stmpe2401 detected, chip id: 0x101 nmk-i2c 101f8000.i2c0: write to slave 0x44 timed out nmk-i2c 101f8000.i2c0: no ack received after address transmission It turns out that we start to poll for the reset bit to go low again too quickly: the STMPE2401 is not yet online and ready to be asked for the status of the RESET bit. By introducing a 10ms delay before starting to hammer the register for information, we get back to normal: stmpe-i2c 0-0043: stmpe2401 detected, chip id: 0x101 stmpe-i2c 0-0044: stmpe2401 detected, chip id: 0x101 Cc: stable@vger.kernel.org Cc: Amelie Delaunay <amelie.delaunay@st.com> Fixes: c4dd1ba355aa ("mfd: stmpe: Add reset support for all STMPE variant") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-11-16mfd: intel_soc_pmic_bxtwc: Fix usbc interruptHeikki Krogerus1-2/+4
The wcove USB Type-C driver is currently being flooded with interrupts that are not targeted to it. The reason for that is because all CHRG first level interrupts are mapped to it. This fixes the issue by introducing separate irq for the usbc device, and mapping only USB Type-C PHY interrupts to it. Fixes: 9c6235c86332 ("mfd: intel_soc_pmic_bxtwc: Add bxt_wcove_usbc device") Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-11-16mfd: intel-lpss: Do not put device in reset state on suspendAzhar Shaikh1-3/+0
Commit 41a3da2b8e163 ("mfd: intel-lpss: Save register context on suspend") saved the register context while going to suspend and also put the device in reset state. Due to the resetting of device, system cannot enter S3/S0ix states when no_console_suspend flag is enabled. The system and serial console both hang. The resetting of device is not needed while going to suspend. Hence remove this code. Cc: stable@vger.kernel.org Fixes: 41a3da2b8e163 ("mfd: intel-lpss: Save register context on suspend") Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-11-16mfd: lpss: Fix Intel Kaby Lake PCH-H propertiesJarkko Nikula1-22/+9
There are a few issues on Intel Kaby Lake PCH-H properties added by commit a6a576b78e09 ("mfd: lpss: Add Intel Kaby Lake PCH-H PCI IDs"): - Input clock of I2C controller on Intel Kaby Lake PCH-H is 120 MHz not 133 MHz. This was probably copy-paste error from Intel Broxton I2C properties. - There is no default I2C SDA hold time specified which is used when ACPI doesn't provide it. I got information from Windows driver team that Kaby Lake PCH-H can use the same configuration than Intel Sunrisepoint PCH. - Common HS-UART properties are not used. Fix these by reusing the Sunrisepoint properties on Kaby Lake PCH-H. Fixes: a6a576b78e09 ("mfd: lpss: Add Intel Kaby Lake PCH-H PCI IDs") Reported-by: Xiang A Wang <xiang.a.wang@intel.com> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-07Merge tag 'mfd-for-linus-4.9' of ↵Linus Torvalds38-271/+1226
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core framework: - Add the MFD bindings doc to MAINTAINERS New drivers: - X-Powers AC100 Audio CODEC and RTC - TI LP873x PMIC - Rockchip RK808 PMIC - Samsung Exynos Low Power Audio New device support: - Add support for STMPE1600 variant to stmpe - Add support for PM8018 PMIC to pm8921-core - Add support for AXP806 PMIC in axp20x - Add support for AXP209 GPIO in axp20x New functionality: - Add support for Reset to all STMPE variants - Add support for MKBP event support to cros_ec - Add support for USB to intel_soc_pmic_bxtwc - Add support for IRQs and Power Button to tps65217 Fix-ups: - Clean-up defunct author emails (da9063, max14577) - Kconfig fixups (wm8350-i2c, as37220 - Constify (altera-a10sr, sm501) - Supply PCI IDs (intel-lpss-pci) - Improve clocking (qcom_rpm) - Fix IRQ probing (ucb1x00-core) - Ensure fault log is cleared (da9052) - Remove NO_IRQ check (ucb1x00-core) - Supply I2C properties (intel-lpss-acpi, intel-lpss-pci) - Non standard declaration (tps65217, max8997-irq) - Remove unused code (lp873x, db8500-prcmu, ab8500-debugfs, cros_ec_spi) - Make non-modular (altera-a10sr, intel_msic, smsc-ece1099, sun6i-prcm, twl-core) - OF bindings (ac100, stmpe, qcom-pm8xxx, qcom-rpm, rk808, axp20x, lp873x, exynos5433-lpass, act8945a, aspeed-scu, twl6040, arizona) Bugfixes: - Release OF pointer (qcom_rpm) - Avoid double shifting in suspend/resume (88pm80x) - Fix 'defined but not used' error (exynos-lpass) - Fix 'sleeping whilst attomic' (atmel-hlcdc)" * tag 'mfd-for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits) mfd: arizona: Handle probe deferral for reset GPIO mfd: arizona: Remove arizona_of_get_named_gpio helper function mfd: arizona: Add DT options for max_channels_clocked and PDM speaker config mfd: twl6040: Register child device for twl6040-pdmclk mfd: cros_ec_spi: Remove unused variable 'request' mfd: omap-usb-host: Return value is not 'const int' mfd: ab8500-debugfs: Remove 'weak' function suspend_test_wake_cause_interrupt_is_mine() mfd: ab8500-debugfs: Remove ab8500_dump_all_banks_to_mem() mfd: db8500-prcmu: Remove unused *prcmu_set_ddr_opp() calls mfd: ab8500-debugfs: Prevent initialised field from being over-written mfd: max8997-irq: 'inline' should be at the beginning of the declaration mfd: rk808: Fix RK818_IRQ_DISCHG_ILIM initializer mfd: tps65217: Fix nonstandard declaration mfd: lp873x: Remove unused mutex lock from struct lp873x mfd: atmel-hlcdc: Do not sleep in atomic context mfd: exynos-lpass: Mark PM functions as __maybe_unused mfd: intel-lpss: Add default I2C device properties for Apollo Lake mfd: twl-core: Make it explicitly non-modular mfd: sun6i-prcm: Make it explicitly non-modular mfd: smsc-ece1099: Make it explicitly non-modular ...
2016-10-05Merge tag 'gpio-v4.9-1' of ↵Linus Torvalds7-487/+325
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.9 series: Subsystem improvements: - do away with the last users of the obsolete Kconfig options ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB (the latter always sounded like an item on a wishlist to Santa Claus to me). We can now select GPIOLIB and be done with it, for all archs. After some struggle it even work on UM. Not that it has GPIO, but if it wants to, it can select the library. - continued efforts to make drivers properly either tristate or bool. - introduce a warning for drivers assigning default triggers to their irqchip lines when probed from device tree, so we find and fix these ambigous drivers. It is agreed that in the OF config path, the device tree defines trigger characteristics. - the same warning, mutatis mutandis, for ACPI-probed GPIO irqchips. - we introduce the ability to mark certain IRQ lines as "unusable" as they can be taken by BIOS/firmware, unrouted in silicon and generally nasty if you use them, and such things. This is put to good use in the STMPE driver and also in the Cherryview pin control driver. - a new "mockup" virtual GPIO device that can be used for testing. The plan is to add unit tests under tools/* for exercising this device and verify that the kernel code paths are working as they should. - make memory-mapped I/O-drivers depend on HAS_IOMEM. This was implicit all the time, but when people started building UM with allyesconfig or allmodconfig it exploded in their face. - move some stray bits of device tree and ACPI HW description callbacks down into their respective implementation silo. These were causing issues when compiling on !HAS_IOMEM as well, so now eventually UM compiles the GPIOLIB library if it wants to. New drivers: - new driver for the Aspeed GPIO front-end companion to the pin controller merged through the pin control tree. - new driver for the LP873x PMIC GPIO portions. - new driver for Technologic Systems' I2C FPGA GPIO such as TS4900, TS-7970, TS-7990 and TS-4100. - new driver for the Broadcom BCM63xx series including BCM6338 and BCM6345. - new driver for the Intel WhiskeyCove PMIC GPIO. - new driver for the Allwinner AXP209 PMIC GPIO portions. - new driver for Diamond Systems 48 line GPIO-MM, another of these port-mapped I/O expansion cards. - support the STMicroelectronics STMPE1600 variant in the STMPE driver. Driver improvements: - the STMPE driver now supports rising/falling edge detection properly for IRQs. - the PCA954x will now fetch and enable its VCC regulator properly. - major rework of the PCA953x driver with the goal of eventually switching it over to use regmap and thus modernize it even more. - switch the IOP driver to use the generic MMIO GPIO library. - move the ages old HTC EGPIO (extended GPIO) GPIO expander driver over to this subsystem from MFD, achieveing some separation of concerns" * tag 'gpio-v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (81 commits) gpio: add missing static inline gpio: OF: localize some gpiochip init functions gpio: acpi: separation of concerns gpio: OF: separation of concerns gpio: make memory-mapped drivers depend on HAS_IOMEM gpio: stmpe: use BIT() macro gpio: stmpe: forbid unused lines to be mapped as IRQs mfd/gpio: Move HTC GPIO driver to GPIO subsystem gpio: MAINTAINERS: Add an entry for GPIO mockup driver gpio/mockup: add virtual gpio device gpio: Added zynq specific check for special pins on bank zero gpio: axp209: Implement get_direction gpio: aspeed: remove redundant return value check gpio: loongson1: remove redundant return value check ARM: omap2: fix missing include gpio: tc3589x: fix up complaints on unsigned gpio: tc3589x: add .get_direction() and small cleanup gpio: f7188x: use gpiochip_get_data instead of container_of gpio: tps65218: use devm_gpiochip_add_data() for gpio registration gpio: aspeed: fix return value check in aspeed_gpio_probe() ...
2016-10-04Merge tag 'regulator-v4.9' of ↵Linus Torvalds1-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator updates from Mark Brown: "This is an extremely quiet release for the regulator API, we've got a small set of bug fixes and minor feature enhancements for drivers plus a couple of more visible changes: - add support for ramp times in regulators that don't use selectors. - new driver for LTC3676" * tag 'regulator-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: dbx500: remove unused functions in dbx500-prcmu.c regulator: pv88080: Update regulator for PV88080 BB silicon support regulator: core: don't return error with inadequate reason regulator: tps65910: Work around silicon erratum SWCZ010 regulator: core: Add set_voltage_time op regulator: core: Don't skip set_voltage_time when ramp delay disabled regulator: core: Simplify error flow in _regulator_do_set_voltage() regulator: core: Use local ops variable in _regulator_do_set_voltage() regulator: hi6421: mark hi6421_regulator_ldo_get_optimum_mode() static regulator: Kconfig: Fix typo regulator: bindings: Use the correct symbol for second regulator: Remove support for optional supplies in the bulk API regulator: Add LTC3676 support regulator: rk808: Delete owner assignment regulator: tps65218: do not disable DCDC3 during poweroff on broken PMICs mfd: tps65218: add version check to the PMIC probe
2016-10-04mfd: arizona: Handle probe deferral for reset GPIOCharles Keepax1-4/+9
The Arizona CODECs will generally function correctly without a reset line although it is strongly advised to have one, as such we do allow the system to boot if the reset gpio is missing or incorrectly specified. However we should fail probe if we get a probe deferral request, this patch adds handling for this case. Reported-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: arizona: Remove arizona_of_get_named_gpio helper functionCharles Keepax1-20/+7
This function is only used in a single place and no new users will be added as all the devices other required GPIOs are already handled. As such just merge the code back into the calling function. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
2016-10-04mfd: arizona: Add DT options for max_channels_clocked and PDM speaker configRichard Fitzgerald1-0/+30
This patch adds DT settings for the max_channels_clocked, spk_fmt and spk_mute pdata. Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: twl6040: Register child device for twl6040-pdmclkPeter Ujfalusi1-0/+5
The McPDM in OMAP4/5 is using the pdmclk from twl6040 as functional clock. The twl6040-pdmclk driver provides a clock which can be used to make sure that the pdmclk is active when the McPDM is in use. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: cros_ec_spi: Remove unused variable 'request'Lee Jones1-2/+0
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: omap-usb-host: Return value is not 'const int'Lee Jones1-1/+1
Change from 'const int' to just 'int'. Cc: <robh+dt@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: ab8500-debugfs: Remove 'weak' function ↵Lee Jones1-9/+1
suspend_test_wake_cause_interrupt_is_mine() There are no other functions which can over-ride it. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: ab8500-debugfs: Remove ab8500_dump_all_banks_to_mem()Lee Jones1-54/+0
Doesn't appear to be used. No call sites exist. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: db8500-prcmu: Remove unused *prcmu_set_ddr_opp() callsLee Jones1-19/+0
There are no call sites for these functions. Strip them out. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: ab8500-debugfs: Prevent initialised field from being over-writtenLee Jones1-29/+21
Due to the lack of parity in the way array fields have been named/ numbered, a mistake was made where more debug fields were declared than actually existed. In doing so, 2 fields were added, which although unclear, were already declared in the array. The result was that the latter declarations trashed the former ones. This patch places the array back in the correct order and removes the offending NULL entries. While we're at it, let's ensure this doesn't happen again by naming each field properly and add a new *_LAST define to describe how many fields there should be. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: max8997-irq: 'inline' should be at the beginning of the declarationLee Jones1-1/+1
Reported by [-Wold-style-declaration]. Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: tps65217: Fix nonstandard declarationArnd Bergmann1-1/+1
The tps65217 gained a new warning when building with W=1: drivers/mfd/tps65217.c:85:1: error: 'inline' is not at beginning of declaration [-Werror=old-style-declaration] This fixes it by putting the 'inline' modifier before 'const'. Fixes: 262d5cc6ceb2 ("mfd: tps65217: Add support for IRQs") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: lp873x: Remove unused mutex lock from struct lp873xAxel Lin1-2/+0
The mutex is not used, so remove it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: atmel-hlcdc: Do not sleep in atomic contextBoris Brezillon1-2/+3
readl_poll_timeout() calls usleep_range(), but regmap_atmel_hlcdc_reg_write() is called in atomic context (regmap spinlock held). Replace the readl_poll_timeout() call by readl_poll_timeout_atomic(). Cc: <stable@vger.kernel.org> Fixes: ea31c0cf9b07 ("mfd: atmel-hlcdc: Implement config synchronization") Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: exynos-lpass: Mark PM functions as __maybe_unusedArnd Bergmann1-4/+2
The newly added exynos lpass driver produces a build warning when CONFIG_PM is disabled since the only callers of exynos_lpass_disable are under an #ifdef: drivers/mfd/exynos-lpass.c:93:13: error: 'exynos_lpass_disable' defined but not used [-Werror=unused-function] static void exynos_lpass_disable(struct exynos_lpass *lpass) This removes the #ifdef and replaces it with __maybe_unused annotations so the compiler can leave out the unused code silently with less room for mistakes. Fixes: 36c26760bba8 ("mfd: Add Samsung Exynos Low Power Audio Subsystem driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: intel-lpss: Add default I2C device properties for Apollo LakeJarkko Nikula2-9/+33
Default I2C device properties for Intel Broxton, especially SDA hold time may not be enough on Intel Apollo Lake. These properties are used in case we don't get timing parameters from ACPI. The default SDA hold time for Broxton may fail with arbitration lost errors on Apollo Lake: i2c_designware i2c_designware.1: i2c_dw_handle_tx_abort: lost arbitration Fix this by using different default device properties on Apollo Lake than Broxton. Reported-by: Paul Liu <paul.liu@canonical.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=156181 Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: twl-core: Make it explicitly non-modularPaul Gortmaker1-8/+1
The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config TWL4030_CORE drivers/mfd/Kconfig: bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 Support" ...meaning that it currently is not being built as a module by anyone. Lets remove what modular code that we can, so that when reading the driver there is less doubt that it is builtin-only. Note that we can't remove the twl_remove() itself ; it is still used by the probe unwind routine. So we leave it linked into the .remove as well, even though it will most likely never be called via that path from an unbind. Since module_i2c_driver() uses the same init level priority as builtin_i2c_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: sun6i-prcm: Make it explicitly non-modularPaul Gortmaker1-6/+2
The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config MFD_SUN6I_PRCM drivers/mfd/Kconfig: bool "Allwinner A31 PRCM controller" ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modularity so that when reading the driver there is no doubt it is builtin-only. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: smsc-ece1099: Make it explicitly non-modularPaul Gortmaker1-9/+2
The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config MFD_SMSC drivers/mfd/Kconfig: bool "SMSC ECE1099 series chips" ...meaning that it currently is not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_init was not in use by this code, the init ordering remains unchanged with this commit. We replace module.h with init.h and delete an unused moduleparam.h include. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: intel_msic: Make it explicitly non-modularPaul Gortmaker1-7/+2
The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config MFD_INTEL_MSIC drivers/mfd/Kconfig: bool "Intel MSIC ...meaning that it currently is not being built as a module by anyone. Lets remove the couple instances of module references, so that when reading the driver there is no doubt it is builtin-only. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-10-04mfd: as3722: Convert MFD_AS3722 from bool to tristatePaul Gortmaker1-1/+1
The Kconfig currently controlling compilation of this code is: drivers/mfd/Kconfig:config MFD_AS3722 drivers/mfd/Kconfig: bool "ams AS3722 Power Management IC" ...meaning that it currently is not being built as a module by anyone. In response to an earlier patch set suggesting removal of the unused modular code, Laxman suggested that this driver be instead moved to tristate. We do that here, and confirm it can build and modpost as a tristate. However there remains to be runtime testing in order to ensure this change is 100% functional for "=m". Cc: Florian Lobmaier <florian.lobmaier@ams.com> Cc: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-08 10:28:59 +0300