summaryrefslogtreecommitdiff
path: root/drivers/mfd
AgeCommit message (Collapse)AuthorFilesLines
2006-03-24[PATCH] show MCP menu only on ARCH_SA1100Adrian Bunk1-0/+1
On architectures like i386, the "Multimedia Capabilities Port drivers" menu is visible, but it can't be visited since it contains nothing usable for !ARCH_SA1100. This patch therefore shows this menu only on ARCH_SA1100. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-13[PATCH] Add MCP bus_type probe and remove methodsRussell King1-2/+2
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-12[MMC+MFD] Convert mmc to mutexesArjan van de Ven1-13/+14
convert mfd and mmc to mutexes Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09[PATCH] drivers/mfd: header included twiceNicolas Kaiser1-1/+0
linux/delay.h included twice Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-09[PATCH] IRQ type flagsRussell King1-3/+2
Some ARM platforms have the ability to program the interrupt controller to detect various interrupt edges and/or levels. For some platforms, this is critical to setup correctly, particularly those which the setting is dependent on the device. Currently, ARM drivers do (eg) the following: err = request_irq(irq, ...); set_irq_type(irq, IRQT_RISING); However, if the interrupt has previously been programmed to be level sensitive (for whatever reason) then this will cause an interrupt storm. Hence, if we combine set_irq_type() with request_irq(), we can then safely set the type prior to unmasking the interrupt. The unfortunate problem is that in order to support this, these flags need to be visible outside of the ARM architecture - drivers such as smc91x need these flags and they're cross-architecture. Finally, the SA_TRIGGER_* flag passed to request_irq() should reflect the property that the device would like. The IRQ controller code should do its best to select the most appropriate supported mode. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-12[PATCH] input: fix ucb1x00-ts breakage after conversion to dynamic input_dev ↵Nicolas Pitre1-8/+11
allocation The bd622663192e8ebebb27dc1d9397f352a82d2495 commit broke the UCB1x00 touchscreen driver since the idev structure was assumed to be into the ts structure, simply casting the former to the later in a couple places. This patch fixes those, and also cache the idev pointer between multiple calls to input_report_abs() to avoid growing the compiled code needlessly. Signed-off-by: Nicolas Pitre <nico@cam.org> Cc: Dmitry Torokhov <dtor_core@ameritech.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-10[DRIVER MODEL] Convert platform drivers to use struct platform_driverRussell King1-16/+16
This allows us to eliminate the casts in the drivers, and eventually remove the use of the device_driver function pointer methods for platform device drivers. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-07[PATCH] fix remaining missing includesTim Schmielau1-0/+2
Fix more include file problems that surfaced since I submitted the previous fix-missing-includes.patch. This should now allow not to include sched.h from module.h, which is done by a followup patch. Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31Merge master.kernel.org:/home/rmk/linux-2.6-drvmodelLinus Torvalds1-1/+1
Manual #include fixups for clashes - there may be some unnecessary
2005-10-31[ARM] Sharp sl-5500 touchscreen supportPavel Machek1-21/+53
This adds support for sharp zaurus sl-5500 touchscreen. It introduces some not-too-nice ifs, but I guess copying whole ucb1x00-ts.c would be bad idea... Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-29Create platform_device.h to contain all the platform device details.Russell King1-1/+1
Convert everyone who uses platform_bus_type to include linux/platform_device.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] DRIVER MODEL: Get rid of the obsolete tri-level suspend/resume callbacksRussell King1-11/+9
In PM v1, all devices were called at SUSPEND_DISABLE level. Then all devices were called at SUSPEND_SAVE_STATE level, and finally SUSPEND_POWER_DOWN level. However, with PM v2, to maintain compatibility for platform devices, I arranged for the PM v2 suspend/resume callbacks to call the old PM v1 suspend/resume callbacks three times with each level in order so that existing drivers continued to work. Since this is obsolete infrastructure which is no longer necessary, we can remove it. Here's an (untested) patch to do exactly that. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] Input: convert ucb1x00-ts to dynamic input_dev allocationDmitry Torokhov1-19/+24
Input: convert ucb1x00-ts to dynamic input_dev allocation This is required for input_dev sysfs integration Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-10[ARM] 2956/1: fix the "Fix gcc4 build errors in ucb1x00-core.c"Nicolas Pitre1-11/+11
Patch from Nicolas Pitre drivers/mfd/ucb1x00-core.c: In function 'ucb1x00_probe': drivers/mfd/ucb1x00-core.c:482: error: 'ucb1x00_class' undeclared (first use in this function) Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-06[MFD] Fix gcc4 build errors in ucb1x00-core.cRussell King2-4/+0
drivers/mfd/ucb1x00-core.c:555: error: static declaration of 'ucb1x00_class' follows non-static declaration drivers/mfd/ucb1x00.h:109: error: previous declaration of 'ucb1x00_class' was here Since ucb1x00_class isn't used by anything, remove the extern declaration and the symbol export. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-24[MFD] Fix "bious one-bit signed bitfield" errorsRussell King1-2/+2
ucb1x00-ts declared a couple of one-bit 'int' bitfields. Make them unsigned. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-11[MFD] Cleanups suggested by Dmitri, Vojtech and lists.Pavel Machek1-48/+17
These are small ucb1x00-ts cleanups, as suggested by Vojtech, Dmitri and the lists. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-11[MFD] Add code UCB1200/UCB1300 assabet platform supportRussell King2-0/+77
Add support for Intel assabet specific board support for UCB1200/UCB1300 devices. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-11[MFD] Add code UCB1200/UCB1300 touchscreen supportRussell King3-0/+435
Add support for Philips UCB1200 and UCB1300 touchscreen interfaces found on ARM devices. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-11[MFD] Add code UCB1200/UCB1300 device supportRussell King4-0/+927
Add the core device support code for the Philips UCB1200 and UCB1300 devices. Also includes the following from Pavel: This fixes u32 vs. pm_message_t confusion and uses cleaner try_to_freeze() [fixing compilation as a side-effect on newer kernels.] Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-18[MFD] Add SA11x0 MCP platform device supportRussell King1-10/+10
Add platform device data for the SA11x0 MCP device. This allows platforms to customise the configuration of the SA11x0 MCP device according to their needs. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-18[MFD] Add SA11x0 MCP supportRussell King3-0/+282
This adds support for the MCP interface found on SA11x0 devices. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-18[MFD] Add multimedia communication port core supportRussell King4-0/+336
Add support for the core of the multimedia communication port framework. This is a port used to communicate with devices with two DMA paths and a control path. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-24 17:37:33 +0300