summaryrefslogtreecommitdiff
path: root/drivers/mfd/tps65910.c
AgeCommit message (Collapse)AuthorFilesLines
2012-09-16mfd: core: Push irqdomain mapping out into devicesMark Brown1-1/+1
Currently the MFD core supports remapping MFD cell interrupts using an irqdomain but only if the MFD is being instantiated using device tree and only if the device tree bindings use the pattern of registering IPs in the device tree with compatible properties. This will be actively harmful for drivers which support non-DT platforms and use this pattern for their DT bindings as it will mean that the core will silently change remapping behaviour and it is also limiting for drivers which don't do DT with this particular pattern. There is also a potential fragility if there are interrupts not associated with MFD cells and all the cells are omitted from the device tree for some reason. Instead change the code to take an IRQ domain as an optional argument, allowing drivers to take the decision about the parent domain for their interrupts. The one current user of this feature is ab8500-core, it has the domain lookup pushed out into the driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-16mfd: Add tps65910 32-kHz-crystal-input initJohan Hovold1-10/+9
Replace tps65910_misc_init with a dedicated init function for the 32-kHz-crystal input, and make the code more readable. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09mfd: Add device-tree entry to enable tps65910 external 32-kHz oscillatorJohan Hovold1-0/+3
Add device-tree entry to enable external 32-kHz crystal oscillator input. Compile-only tested. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09mfd: Add support for enabling tps65910 external 32-kHz oscillatorJohan Hovold1-1/+20
Add flag to platform data to enable external 32-kHz crystal oscillator (or square wave) input. The tps6591x can use either an internal 32-kHz RC oscillator or an external crystal (or square wave) to generate the 32-kHz clock. The default setting depends on the selected boot mode. In boot mode 00 the internal RC oscillator is used at power-on, but the external crystal oscillator (or square wave) can be enabled by clearing the ck32k_ctrl flag in the device control register. Note that there is no way to switch from the external crystal oscillator to the internal RC oscillator. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-23mfd: Remove the parsing of dt info for tps65910 gpioLaxman Dewangan1-15/+0
Remove the parsing of device node information for sub devices from core file. The sub devices will parse the information as per the sub-devices specific information. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-23mfd: Save device node parsed platform data for tps65910 sub devicesLaxman Dewangan1-1/+5
Save the allocated memory to store the parsed device node information to the global device structure so that sub devices can directly use this pointer. In this way, the sub devices does not require to re-allocate the memory for storing the sub-devices specific device node information. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20mfd: Fix tps65910 build failureSamuel Ortiz1-2/+3
The tps65910_parse_dt() prototype for !CONFIG_OF was not correct, leading to: drivers/mfd/tps65910.c: In function ‘tps65910_i2c_probe’: drivers/mfd/tps65910.c:218:3: error: too many arguments to function ‘tps65910_parse_dt’ Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20mfd: Register tps65910 gpios as an mfd deviceLaxman Dewangan1-3/+3
As gpio support for tps65910 is on gpio driver, registering gpio support as the mfd sub devices instead of calling gpio_init() from the core probe. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20mfd: Convert all tps65910 allocation to devm_*Laxman Dewangan1-19/+9
Convert memory allocation and regmap initialization to use devm_* functions. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20mfd: Cache tps65910 register when we need itLaxman Dewangan1-2/+1
During regmap initialization, we do not provide the default value and hence in place of caching register during regmap_init(), cache it when actually we need it i.e. after reading of that register. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20mfd: Add tps65910 device-tree supportRhyland Klein1-1/+79
Add device tree based initialization support for TI's tps65910 pmic. Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20mfd: Commonize tps65910 regmap access through headerRhyland Klein1-31/+9
This change removes the read/write callback functions in favor of common regmap accessors inside the header file. This change also makes use of regmap_read/write for single register access which maps better onto what this driver actually needs. Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-07mfd: Fix tps65910 section annotationsMark Brown1-5/+5
A warning was being generated by the reference from tps65910_i2c_probe() to tps65910_sleepinit() since the latter was annotated as __init but the former was unannotated. Since these functions can only be called during device init make them both __devinit, and while we're at it also annotate tps65910_i2c_remove() __devexit for symmetry. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-01mfd: Add support for tps65910 device sleepLaxman Dewangan1-0/+62
Adding support for device sleep through the external input control signal "SLEEP". Changing the SLEEP signal state can switch the device into SLEEP and ACTIVE state. Also adding sleep configuration for different resources so that they should be keep on during sleep state of device. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16mfd: Use correct variable name for tps65910 regmap configLaxman Dewangan1-2/+2
This was the copy-paste issue in reg cache support code where variable name for regmap config was not really starting from the device name, it was starting from some other device name. Fixing this so that variable name contains actual device name. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Use regmap for tps65910 register access.Laxman Dewangan1-77/+46
Using regmap apis for accessing the device registers and using RBTREE caching mechanims for caching registers. Enabling caching of the registers which is used for voltage controls. By doing this, the modify_bits operation is faster as it does not involve the i2c register read from device, just read from cache. This results faster set voltage operation. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Initialize tps65910 irq platform data properlyLaxman Dewangan1-1/+1
irq_base of the tps65910 irq platform data should be initialized with the board provided irq_base data. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Make TPS65910 usable without interruptsAfzal Mohammed1-5/+2
TPS65910 can be used without interrupts. Hence let probe succeed in case interrupt can't be configured and let Kernel only to complain about it Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-12-20mfd: Handle tps65910 clear-mask correctlyMarcus Folkesson1-1/+1
The function is not actually cleaing the bitmask. Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-08-01mfd: Avoid two assignments if failures happen in tps65910_i2c_probeJesper Juhl1-3/+3
In drivers/mfd/tps65910.c:tps65910_i2c_probe() there's potential for a tiny optimization. We assign to init_data->irq and init_data->irq_base long before we need them, and there are two potential exits from the function before they are needed. Moving the assignments below these two potential exits means we completely avoid doing them in these two (failure) cases. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-08-01mfd: Don't leak init_data in tps65910_i2c_probeJesper Juhl1-1/+5
There are a couple of situations where we leak init_data in drivers/mfd/tps65910.c:tps65910_i2c_probe() - this patch should take care of them. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-08-01mfd: Implement tps65910 IRQ cleanupMark Brown1-0/+1
The tps65910_irq_exit() cleanup function was generating a warning from sparse due to the lack of a prototype. This wasn't causing GCC warnings as the driver wasn't cleaning up its IRQs on exit at all so there was no use of an unprototyped function. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-27MFD: TPS65910: Add support for TPS65911 deviceJorge Eduardo Candelaria1-1/+3
The TPS65911 is the next generation of the TPS65910 family of PMIC chips. It adds a few features: - Watchdog Timer - PWM & LED generators - Comparators for system control status It also adds a set of Interrupts and GPIOs, among other things. The driver exports a function to identify between different versions of the tps65910 family, allowing other modules to identify the capabilities of the current chip. Signed-off-by: Jorge Eduardo Candelaria <jedu@slimlogic.co.uk> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-05-27mfd: Fix off-by-one value range checking for tps65910_i2c_writeAxel Lin1-1/+1
If bytes == (TPS65910_MAX_REGISTER + 1), we have a buffer overflow when doing memcpy(&msg[1], src, bytes). Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-05-27TPS65910: IRQ: Add interrupt controllerGraeme Gregory1-0/+12
This module controls the interrupt handling for the tps chip. The interrupt sources are the following: - GPIO falling/rising edge detection - Battery voltage below/above threshold - PWRON signal - PWRHOLD signal - Temperature detection - RTC alarm and periodic event Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Jorge Eduardo Candelaria <jedu@slimlogic.co.uk> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-05-27TPS65910: GPIO: Add GPIO driverGraeme Gregory1-0/+7
TPS65910 has one configurable GPIO that can be used for several purposes. Subsequent versions of the TPS chip support more than one GPIO. Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Jorge Eduardo Candelaria <jedu@slimlogic.co.uk> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-05-27MFD: TPS65910: Add new mfd device for TPS65910Graeme Gregory1-0/+208
The TPS65910 chip is a power management IC for multimedia and handheld devices. It contains the following components: - Regulators - GPIO controller - RTC The tps65910 core driver is registered as a platform driver and provides communication through I2C with the host device for the different components. Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Jorge Eduardo Candelaria <jedu@slimlogic.co.uk> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-28 21:32:57 +0300