summaryrefslogtreecommitdiff
path: root/drivers/message/fusion/mptbase.h
AgeCommit message (Collapse)AuthorFilesLines
2010-04-11[SCSI] mptfusion: Bump version 03.04.15Kashyap, Desai1-2/+2
Upgrade version from 3.04.14 to 3.04.15 Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-04-11[SCSI] mptfusion: Added new less expensive RESET (Message Unit Reset)Kashyap, Desai1-0/+1
Message Unit Reset - instructs the IOC to reset the Reply Post and Free FIFO's. All the Message Frames on Reply Free FIFO are discarded. All posted buffers are freed, and event notification is turned off. IOC doesnt reply to any outstanding request. This will transfer IOC to READY state. Message unit ready is less expensive operations than Hard Reset. soft reset will not force Firmware to reload again, it only do clean up of Message units. mpt_Soft_Hard_ResetHandler will first try for Soft Reset,if it fails then go for big hammer reset which is Hard Reset. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-01-18[SCSI] mptfusion: Bump version 03.04.14Kashyap, Desai1-2/+2
Version upgrade to 3.04.14. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-29[SCSI] mptfusion: Bump version to 3.04.13Kashyap, Desai1-2/+2
Bump version 3.04.13. Signed-off-by: Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-12[SCSI] mptsas : Bump version to 3.04.12Kashyap, Desai1-2/+2
Bump version to 3.04.12 Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-23[SCSI] mptsas : Bump version to 3.04.11Kashyap, Desai1-2/+2
Bump version to 3.04.11 Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-23[SCSI] mptsas : Removed mptscsih_timer_expired.Kashyap, Desai1-14/+0
Removed mptscsih_timer_expired. This timer is no more use. Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-08-23[SCSI] mptsas : Change DEFINED value of can queue for FC and SAS devices.Kashyap, Desai1-1/+2
Change DEFINED value of can queue for FC and SAS devices. Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-06-10[SCSI] mpt fusion: Added support for Broadcast primitives Event handlingKashyap, Desai1-0/+1
Firmware is able to handle Broadcast primitives, but upstream driver does not have support for broadcast primitive handling. Now this patch is mainly to support broadcast primitives. Signed-off-by: Kashyap Desai <kadesai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-10[SCSI] mpt fusion: RAID device handling and Dual port Raid support is addedKashyap, Desai1-0/+4
1. Handle integrated Raid device(Add/Delete) and error condition and check related to Raid device. is_logical_volume will represent logical volume device. 2. Raid device dual port support is added. Main functions to support this feature are mpt_raid_phys_disk_get_num_paths and mpt_raid_phys_disk_pg1. Signed-off-by: Kashyap Desai <kadesai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-10[SCSI] mpt fusion: Code Cleanup patchKashyap, Desai1-14/+32
Resending patch considering Grants G's code review. Main goal to submit this patch is code cleaup. 1. Better driver debug prints and code indentation. 2. fault_reset_work_lock is not used anywhere. driver is using taskmgmt_lock instead of fault_reset_work_lock. 3. setting pci_set_drvdata properly. 4. Ingore config request when IOC is in reset state.( ioc_reset_in_progress is set). 5. Init/clear managment frame proprely.(INITIALIZE_MGMT_STATUS and CLEAR_MGMT_STATUS) Signed-off-by: Kashyap Desai <kadesai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-10[SCSI] mpt fusion: Rescan SAS topology addedKashyap, Desai1-2/+4
1.) SAS topology Rescan is added. If Firmware is doing Reset and we get Device add interrupt from Firmware, we will not receive it as part of Reset is going ON. After Reset we will do special Rescan of SAS topology. 2.) Driver version changed from 3.04.08 to 3.04.09. Added proper lock/unlock in mptsas_not_responding_devices() as per James' comment. Signed-off-by: Kashyap Desai <kadesai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-10[SCSI] mpt fusion: SAS topology scan changes, expander eventsKashyap, Desai1-0/+5
SAS topology scan is restructured. HBA firmware is generating more events. Expander Events are added, Link status events are also added with respect to SAS topology scan optimization. Signed-off-by: Kashyap Desai <kadesai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-10[SCSI] mpt fusion: Firmware event implementation using seperate WorkQueueKashyap, Desai1-0/+9
Now Firmware events are handled by firmware event queue. Previously it was handled in interrupt context/WorkQueue of Linux. Firmware Event handling is restructured and optimized. Signed-off-by: Kashyap Desai <kadesai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-10[SCSI] mpt fusion: rewrite of ioctl_cmds internal generated functionKashyap, Desai1-15/+6
1) rewrite of ioctl_cmds internal generated function that issue commands to firmware, porting them to be single threaded using the generic MPT_MGMT struct. All wait Queues are replace by completion Queue. 2) added seperate callback handler for ioctl task managment (mptctl_taskmgmt_reply), to handle command that timeout 3) rewrite mptctl_bus_reset Signed-off-by: Kashyap Desai <kadesai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-10[SCSI] mpt fusion: Adding DeviceResetCtx for internal Device reset frameKashyap, Desai1-1/+1
1.) Added taskmgmt_quiesce_io flag in IOC and removed resetPending from _MPT_SCSI_HOST struct. 2.) Reset from Scsi mid layer and internal Reset are seperate context. Adding DeviceResetCtx for internal Device reset frame. mptsas_taskmgmt_complete is optimized as part of implementation. Signed-off-by: Kashyap Desai <kadesai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-10[SCSI] mpt fusion: rewrite taskmgmt request and completion routinesKashyap, Desai1-2/+6
1.) rewrite taskmanagement request and completion routines, making them single threaded and using the generic MPT_MGMT struct, deleting mptscsih_TMHandler, replacing with single request TM handler mptscsih_IssueTaskMgmt, and killing the watchdog timer functions. 2.) cleanup ioc_reset callback handlers, introducing wrappers for synchronizing error recovery (mpt_set_taskmgmt_in_progress_flag, mpt_clear_taskmgmt_in_progress_flag), as the fusion firmware only handles one task management request at a time Signed-off-by: Kashyap Desai <kadesai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-10[SCSI] mpt fusion: rewrite of all internal generated functionsKashyap, Desai1-2/+3
Rewrite of all internal generated functions that issue commands to firmware, porting them to be single threaded using the generic MPT_MGMT struct. Implemented using completion Queue. Signed-off-by: Kashyap Desai <kadesai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-10[SCSI] mpt fusion: config path optimized, completion queue is usedKashyap, Desai1-25/+20
1) Previously we had mutliple #defines to use same values. Now those #defines are optimized. MPT_IOCTL_STATUS_* is removed and MPT_MGMT_STATUS_* are new #defines. 2.) config path is optimized. Instead of wait Queue and timer, using completion Q. 3.) mpt_timer_expired is not used. [jejb: elide patch to eliminate mpt_timer_expired] Signed-off-by: Kashyap Desai <kadesai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-10[SCSI] mpt fusion: Added support for MPT discovery completion checkKashyap, Desai1-0/+1
sas_discovery_quiesce_io flag is used to control IO start/resume functionality. IO will be stoped while doing discovery of topology. Once discovery is completed It will resume IO. Resending patch including James review. Signed-off-by: Kashyap Desai <kadesai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-06-10[SCSI] mpt fusion: Fixing 1078 data corruption issue for 36GB memory regionKashyap, Desai1-13/+22
The reason for this change is there is a data corruption when four different physical memory regions in the 36GB to 37GB region are accessed. This is only affecting 1078. The solution is we need to use different addressing when filling in the scatter gather table for the effected memory regions. So instead of snooping on all four different memory holes, we treat any physical addresses in the 36GB address with the same algorithm. The fix is explained below 1) Ensure that the message frames are NOT located in the trouble region. There is no remapping available for message frames, they must be allocated outside the problem region. 2) Ensure that Sense buffers are NOT in the trouble region. There is no remapping available. 3) Walk through the SGE entries and if any are inside the trouble region then they need to be remapped as discussed below. 1) Set the Local Address bit in the SGE Flags field. MPI_SGE_FLAGS_LOCAL_ADDRESS 2) Ensure we are using 64-bit SGEs 3) Set MSb (Bit 63) of the 64-bit address, this will indicate buffer location is Host Memory. Signed-off-by: Kashyap Desai <kadesai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-01-13[SCSI] mpt fusion: Add Firmware debug supportKashyap, Desai1-0/+3
Signed-off-by: Kashyap Desai <kadesai@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-22driver core: remove KOBJ_NAME_LEN defineKay Sievers1-2/+2
Kobjects do not have a limit in name size since a while, so stop pretending that they do. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-12[SCSI] mpt fusion : Adding FAULT Reset polling workPrakash, Sathya1-0/+8
When the firmware is in Fault state it will be identifed only when the next time the driver access the IOC state. This patch includes a polling function in the driver which will be executed in regular interval to check the status of the firmware and if it is in Fault state, then the firmware will be reset by the driver. Signed-off-by: Sathya Prakash <sathya.prakash@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-06-05[SCSI] mpt fusion : Updated copyright statment with 2008 includedPrakash, Sathya1-2/+2
Updating copyright statement to include the year 2008 Signed-off-by: Sathya Prakash <sathya.prakash@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-06-05[SCSI] mpt fusion: Driver version upgrade to 3.04.07Prakash, Sathya1-2/+2
Updating driver version to 3.04.07 from 3.04.06 Signed-off-by: Sathya Prakash <sathya.prakash@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-06-05[SCSI] mpt fusion: make struct mpt_proc_root_dir staticAdrian Bunk1-1/+0
This patch makes the needlessly global struct mpt_proc_root_dir static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Acked-by: "Prakash, Sathya" <Sathya.Prakash@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07[SCSI] mptsas: do not use ioc->handle to locate hba portinfo structureMichael Reed1-1/+0
While performing hardware raid reset testing via the raid's client, I noticed that sometimes, following the reset, that there would be more raid targets in the lsscsi output than there actually were raid targets. I tracked this down to the following issue. Fusion cannot always find the mptsas_portinfo structure for the hba because it uses the handle stored in ioc->handle to locate it. The problem is that the firmware can change the handle associated with the hba when h/w raid is reset (via the raid client). When this happens, the driver will allocate another mptsas_portinfo structure and link it into the chain of said structures. This ultimately causes confusion within the driver resulting in targets not being removed when they should be. Eric Moore pointed out that the hba's portinfo structure is always the first structure on the sas_topology list. This patch modifies mptsas.c to access the hba's portinfo structure by taking the first structure on said list. Signed-off-by: Michael Reed <mdr@sgi.com> Acked-by: "Moore, Eric" <Eric.Moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07[SCSI] mpt fusion: convert inactive_list_mutex to a mutexMatthias Kaehlcke1-1/+2
the semaphore inactive_list_mutex is used as a mutex, convert it to the mutex API Signed-off-by: Matthias Kaehlcke <matthias@kaehlcke.net> Acked-by: "Moore, Eric" <Eric.Moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07[SCSI] mpt fusion: Enable MSI by default for SAS controllersPrakash, Sathya1-0/+1
This patch modifies the driver to enable MSI by default for all SAS chips. Signed-off-by: Sathya Prakash <sathya.prakash@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-18[SCSI] mpt fusion: kill warnings in mptbase.h on parisc64Kyle McMartin1-1/+1
Verified all the arches necessary select the CONFIG_64BIT symbol. This also kills the warning (since it was using the 32-bit case) on parisc64 and mips64. Signed-off-by: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-11[SCSI] mpt fusion: Request I/O resources only when requiredPrakash, Sathya1-0/+1
This patch modifies the I/O resource allocation behavior of FUSION driver. The current version of driver allocates the I/O resources even if they are not required and this creates trouble in low resource environments. This driver now uses pci_enable_device_mem/pci_enable_device functions to differentiate the resource allocations. Signed-off-by: Sathya Prakash <sathya.prakash@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] mpt fusion: Fix for module unload problem in flash less controller ↵Prakash, Sathya1-1/+1
environment This patch fixes the module unload problem in flash less 1030 controller environment where firmware download boot functionality is invoked. The problem is due to the firmware download is being done in the reverse order, which this patch solves by insureing the download occurs to the last controller being reset. signed-off-by: Sathya Prakash <sathya.prakash@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-10-12[SCSI] mpt fusion: fix up fusion prints using the sdev_printk, dev_printk, ↵Eric Moore1-0/+1
and shost_printk API Cleaning up prints that use the xxx_printk API, in that the fusion preamble "mptbase: iocX" follows the info provided by the print API. The way its currently coded, the [H:C:T] print in sdev_printk will be inbetween "mptbase" and "iocX", instead of before. Signed-off-by: Eric Moore <Eric.Moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] mpt fusion: lock down ScsiLookupEric Moore1-1/+2
ScsiLookup is an array of pending scmd pointers that the scsi lld maintains. This array is touched from queuecommand, eh threads, and interrupt context. This array should put under locks, hence this patch to synchronize its access. I've added some nice little function wrappers for this, and moved the ScsiLookup array over to MPT_ADAPTER struct. Signed-off-by: Eric Moore <Eric.Moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] mpt fusion: bump version to 3.04.06Eric Moore1-2/+2
bump version Signed-off-by: Eric Moore <Eric.Moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] mpt fusion: Change company name from LSI Logic to LSIPrakash, Sathya1-3/+3
Recently LSI Logic Corp was renamed as LSI Corp, so whereever there is a reference of LSI Logic, it is changed to LSI in mpt fusion driver code. signed-off-by: Sathya Prakash <sathya.prakash@lsi.com> Acked-by: Eric Moore <Eric.Moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] mpt fusion: Link speed change display supportPrakash, Sathya1-0/+2
When there is state change in FC links, a message is displayed with old and new link speed. signed-off-by: Sathya Prakash <sathya.prakash@lsi.com> Acked-by: Eric Moore <Eric.Moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] mpt fusion: Change call back indices to u8 from intPrakash, Sathya1-18/+15
The call back index requires only u8 but in lot of places it is referred as int, now everywhere the call back index variables are declared as u8 with uniform name cb_idx signed-off-by: Sathya Prakash <sathya.prakash@lsi.com> Acked-by: Eric Moore <Eric.Moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] mpt fusion: Usage of high priority request FIFO to send task ↵Prakash, Sathya1-1/+3
management commands Added support for sending the task management requests through High priority request FIFO instead of Doorbell writes when firmware support High priority FIFO. signed-off-by: Sathya Prakash <sathya.prakash@lsi.com> Acked-by: Eric Moore <Eric.Moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-12[SCSI] mpt fusion: Add support for ATTO 4LD: Rebranded LSI 53C1030Eric Moore1-0/+29
Per request from Matthew Wilcox - using PCI_VENDOR_ATTO. Add support for ATTO UL4D, they are rebranded 53C1030. The changes are 1. Adding a new PCI vendor ID in pci table 2. The spi_port_page_2 is in different format than that of LSI generic spi_port_page_2 and hence mapping code is added. signed-off-by: Sathya Prakash <sathya.prakash@lsi.com> signed-off-by: Eric Moore <Eric.Moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-28[SCSI] mpt fusion: logging support in Kconfig, Makefile, mptbase.h and ↵Prakash, Sathya1-195/+3
addition of mptdebug.h This patch adds a new file mptdebug.h in the fusion source directory, which contains different debug macros. The existing debug macros and flags are removed from the mptbase.h and Makefile In Kconfig a new configuration parameter FUSION_LOGGING is added to enable/disable the logging support during compile time. signed-off-by: Sathya Prakash <sathya.prakash@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-18[SCSI] mpt fusion: add support for Brocade branded LSI FC HBAPrakash, Sathya1-1/+1
Add support for Brocade 410/420 4Gbit FC HBAs. They are re-branded LSI HBAs [LSI7104EP-LC/LSI7204EP-LC] Signed-off-by: Sathya Prakash <sathya.prakash@lsi.com> Acked-by: "Moore, Eric" <Eric.Moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-18[SCSI] mpt fusion: add sysfs attributes to display IOC parametersPrakash, Sathya1-0/+7
New sysfs scsi_host attributes are added to provide information about Firmware version, BIOS version, MPI version and other product related information signed-off-by: Sathya Praksh <sathya.prakash@lsi.com> Acked-by: "Moore, Eric" <Eric.Moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-18[SCSI] mpt fusion: bump versionEric Moore1-2/+2
bump version Signed-off-by: Eric Moore <Eric.Moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-18[SCSI] mpt fusion: update MAINTAINERS (fusion part)Eric Moore1-1/+1
Update assocated fusion sources with new support email address. Signed-off-by: Eric Moore <Eric.Moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-23[SCSI] fusion: Fix |/|| confusionDave Jones1-1/+1
There are several cases where the fusion driver uses the logical || to try to do an arithmetical or ... fix by replacing with |. Signed-off-by: Dave Jones <davej@redhat.com> Acked-by: "Moore, Eric" <Eric.Moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-04-30[SCSI] fusion: fix domain validation loopsEric Moore1-0/+1
After host reset, the device are programmed to default asyn narrow nego. We need to reprogram the parameter back to previous values. If the host reset is called as a result of spi_dv_device() commands timing out, its possible to get into an infinite loop of dv to host reset. This will prevent that case, as we merely program old values. If host reset is called outside context of domain validation, then we can call spi_dv_device. Signed-off-by: Eric Moore <Eric.Moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-03[SCSI] fusion - bump version - 3.04.04Eric Moore1-3/+3
bump version, and fix email addr for lsi support Signed-off-by: Eric Moore <Eric.Moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-03[SCSI] fusion - serialize target resets in mptsas.cEric Moore1-0/+1
Fusion firmware requires target reset following hotplug removal event, with purpose to flush target outstanding request in fw. Current implementation does the target resets from delayed work tasks, that in heavy load conditions, take too long to be invoked, resulting in command time outs This patch will issue target reset immediately from ISR context, and will queue remaining target resets to be issued after the previous one completes. The delayed work tasks are spawned during the target reset completion. Signed-off-by: Eric Moore <Eric.Moore@lsi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-28 15:31:48 +0300