summaryrefslogtreecommitdiff
path: root/drivers/memory/atmel-ebi.c
AgeCommit message (Collapse)AuthorFilesLines
2022-04-04memory: atmel-ebi: Fix missing of_node_put in atmel_ebi_probeMiaoqian Lin1-6/+17
The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done. Fixes: 87108dc78eb8 ("memory: atmel-ebi: Enable the SMC clock if specified") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220309110144.22412-1-linmq006@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2021-05-11memory: atmel-ebi: add missing of_node_put for loop iterationKrzysztof Kozlowski1-1/+3
Early exits from for_each_available_child_of_node() should decrement the node reference counter. Reported by Coccinelle: drivers/memory/atmel-ebi.c:593:1-33: WARNING: Function "for_each_available_child_of_node" should have of_node_put() before return around line 604. Fixes: 6a4ec4cd0888 ("memory: add Atmel EBI (External Bus Interface) driver") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20210423101815.119341-2-krzysztof.kozlowski@canonical.com
2019-11-08memory: atmel-ebi: switch to SPDX license identifiersTudor Ambarus1-4/+1
Adopt the SPDX license identifiers to ease license compliance management. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20190906151519.19442-1-tudor.ambarus@microchip.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-11-08memory: atmel-ebi: move NUM_CS definition inside EBI driverTudor Ambarus1-2/+4
The total number of EBI CS lines is described by the EBI controller and not by the Matrix. Move the definition for the number of CS inside EBI driver. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20190906150632.19039-1-tudor.ambarus@microchip.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2019-03-21memory: atmel-ebi: add sam9x60 EBI supportTudor Ambarus1-0/+14
The sam9x60 board defines the CCFG_EBICSA register under SFR, and not as a MATRIX register, as previous boards do. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-03-21memory: atmel-ebi: add generic name for ebi regmapTudor Ambarus1-7/+16
The sam9x60 board defines the CCFG_EBICSA register under SFR, and not as a MATRIX register, as previous boards do. Add a more generic name for the EBI regmap as a prerequisite for sam9x60 ebi support. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-08-28memory: atmel-ebi: Use struct_size() in devm_kzalloc()Gustavo A. R. Silva1-2/+1
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = devm_kzalloc(dev, sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = devm_kzalloc(dev, struct_size(instance, entry, count), GFP_KERNEL); This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2017-09-11Merge tag 'armsoc-drivers' of ↵Linus Torvalds1-9/+8
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Olof Johansson: "This branch contains platform-related driver updates for ARM and ARM64. Among them: - Reset driver updates: + New API for dealing with arrays of resets + Make unimplemented {de,}assert return success on shared resets + MSDKv1 driver + Removal of obsolete Gemini reset driver + Misc updates for sunxi and Uniphier - SoC drivers: + Platform SoC driver registration on Tegra + Shuffle of Qualcomm drivers into a submenu + Allwinner A64 support for SRAM + Renesas R-Car R3 support + Power domains for Rockchip RK3366 - Misc updates and smaller fixes for TEE and memory driver subsystems" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits) firmware: arm_scpi: fix endianness of dev_id in struct dev_pstate_set soc/tegra: fuse: Add missing semi-colon soc/tegra: Restrict SoC device registration to Tegra drivers: soc: sunxi: add support for A64 and its SRAM C drivers: soc: sunxi: add support for remapping func value to reg value drivers: soc: sunxi: fix error processing on base address when claiming dt-bindings: add binding for Allwinner A64 SRAM controller and SRAM C bus: sunxi-rsb: Enable by default for ARM64 soc/tegra: Register SoC device firmware: tegra: set drvdata earlier memory: Convert to using %pOF instead of full_name soc: Convert to using %pOF instead of full_name bus: Convert to using %pOF instead of full_name firmware: Convert to using %pOF instead of full_name soc: mediatek: add SCPSYS power domain driver for MediaTek MT7622 SoC soc: mediatek: add header files required for MT7622 SCPSYS dt-binding soc: mediatek: reduce code duplication of scpsys_probe across all SoCs dt-bindings: soc: update the binding document for SCPSYS on MediaTek MT7622 SoC reset: uniphier: add analog amplifiers reset control reset: uniphier: add video input subsystem reset control ...
2017-09-05mfd: syscon: atmel-smc: Add helper to retrieve register layoutLudovic Desroches1-4/+9
For HSMC controller, the register layout depends on the device i.e. the offset of setup, pulse, cycle, mode and timings registers is not the same. An helper is added to provide the correct register layout. Fixes: fe9d7cb22ef3 ("mfd: syscon: atmel-smc: Add new helpers to ease SMC regs manipulation") Suggested-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-08-16memory: Convert to using %pOF instead of full_nameRob Herring1-9/+8
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Roger Quadros <rogerq@ti.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Tony Lindgren <tony@atomide.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-07-26memory: atmel-ebi: Fix smc cycle xlate converterAlexander Dahl1-1/+1
The converter function for translating ns timings in register values was initialized with a wrong function pointer. This resulted in wrong register values also for the setup and pulse registers when configuring the EBI interface trough dts. Includes a small fix in a comment of the smc driver, which was probably just a copy'n'paste mistake. Signed-off-by: Alexander Dahl <ada@thorsis.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-26memory: atmel-ebi: Allow t_DF timings of zero nsAlexander Dahl1-2/+4
As reported in [1] and in [2] it's not possible to set the device tree property 'atmel,smc-tdf-ns' to zero, although the SoC allows a setting of 0ns for the t_DF time. Allow this setting by doing the same thing as in the atmel nand controller driver by setting ncycles to ATMEL_SMC_MODE_TDF_MIN if zero is set in the dts. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2017-March/490966.html [2] http://lists.infradead.org/pipermail/linux-arm-kernel/2017-July/520652.html Suggested-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Alexander Dahl <ada@thorsis.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-07-26memory: atmel-ebi: Fix smc timing return value evaluationAlexander Dahl1-1/+1
Setting optional EBI/SMC properties through device tree always fails due to wrong evaluation of the return value of atmel_ebi_xslate_smc_timings(). If you put some of those properties in your dts file, but not 'atmel,smc-tdf-ns' the local variable 'required' in atmel_ebi_xslate_smc_timings() stays on 'false' after the first 'if' block. This leads to setting 'ret' to -EINVAL in the first run of the following 'for' loop which is then the return value of this function. However if you set 'atmel,smc-tdf-ns' in the dts file and everything in atmel_ebi_xslate_smc_timings() works well, it returns the content of 'required' which is 'true' then. So the function atmel_ebi_xslate_smc_timings() always returns non-zero which lets its call in atmel_ebi_xslate_smc_config() always fail and thus returning -EINVAL, so the EBI configuration for this node fails. Judging from the following code evaluating the local 'required' variable in atmel_ebi_xslate_smc_config() and the call of caps->xlate_config in atmel_ebi_dev_setup() it's probably right to only let the call fail if a negative error code is returned. Signed-off-by: Alexander Dahl <ada@thorsis.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-05-15memory: atmel-ebi: mark PM ops as __maybe_unusedArnd Bergmann1-1/+1
We get a harmless warning without CONFIG_PM: drivers/memory/atmel-ebi.c:584:12: error: 'atmel_ebi_resume' defined but not used [-Werror=unused-function] Marking the function as __maybe_unused does the right thing here and drops it silently when unused. Fixes: a483fb10e5ea ("memory: atmel-ebi: Add PM ops") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-04-27memory: atmel-ebi: Add PM opsBoris Brezillon1-0/+20
Add a ->resume() hook to make sure the EBI dev configs are correctly restored when resuming the platform. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-04-27memory: atmel-ebi: Add missing ->numcs assignmentBoris Brezillon1-0/+1
ebid->numcs is never assigned, set it to numcs after allocating the EBI dev object. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-04-27memory: atmel-ebi: Change naming schemeBoris Brezillon1-60/+60
The EBI block is not only available on at91 SoCs, but also on avr32 ones. Change the structure and function prefixes from at91_ebi to atmel_ebi to match this fact and make the prefix and driver name consistent. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-04-27memory: atmel-ebi: Stop using reg_field objects for simple thingsBoris Brezillon1-42/+13
Turn the ->ebi_csa reg field into a simple offset that can be used with with the matrix regmap. Using reg fields was overkill for this use case. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-04-27memory: atmel-ebi: Simplify SMC config codeBoris Brezillon1-303/+127
New helpers/macros have been to atmel-smc.h introduced to simplify SMC regs manipulation. Rework the code to use those helpers, and simplify the ->xlate_config(), ->get_config() and ->apply_config() implementations. SMC configs are now stored in a struct atmel_smc_cs_conf object that directly contains registers values, which should help implementing ->suspend()/->resume() hooks. We can also get rid of those regmap fields (and the associated ->init() hook) which are not longer needed thanks to the atmel_[h]smc_cs_conf_{apply,get}() helpers. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-01-27memory: atmel-ebi: Enable the SMC clock if specifiedBoris Brezillon1-14/+37
Newer versions of the SMC block requires the SMC clock to be enabled before the SMC logic can be used. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-27memory: atmel-ebi: Properly handle multiple reference to the same CSBoris Brezillon1-19/+27
Some devices are defining several sub-ranges within the same CS iomem range. In this case, we should not duplicate the EBI device config. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-27memory: atmel-ebi: Fix the test to enable generic SMC logicBoris Brezillon1-1/+1
We should test the apply value and not the ret one here. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Fixes: 6a4ec4cd0888 ("memory: add Atmel EBI (External Bus Interface) driver") Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-10memory/atmel-ebi: Fix ns <-> cycles conversionsBoris Brezillon1-13/+14
at91sam9_ebi_get_config() is incorrectly converting timings in clock cycles into timings in nanoseconds by multiplying the cycle values by the clk rate instead of the clk period. at91sam9_ebi_xslate_config() has the same problem for the tdf_ns -> tdf_cycles conversion. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reported-by: Chris Leahy <leahycm@gmail.com> Fixes: 6a4ec4cd0888 ("memory: add Atmel EBI (External Bus Interface) driver") Cc: <stable@vger.kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-10-20memory: atmel-ebi: fix return value check in at91_ebi_dev_disable()Wei Yongjun1-1/+1
Fix the retrn value check which testing the wrong variable in at91_ebi_dev_disable(). Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-08-08memory: atmel-ebi: use PTR_ERR_OR_ZERO() to simplify the codeWei Yongjun1-8/+2
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR. Generated by coccinelle. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-21memory: atmel-ebi: make it explicitly non-modularPaul Gortmaker1-7/+2
The Kconfig currently controlling compilation of this code is: drivers/memory/Kconfig:config ATMEL_EBI drivers/memory/Kconfig: bool "Atmel EBI driver" ...meaning that it currently is not being built as a module by anyone. Lets remove the few remaining modular references, so that when reading the driver there is no doubt it is builtin-only. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-06-02memory: add Atmel EBI (External Bus Interface) driverBoris Brezillon1-0/+771
The EBI (External Bus Interface) is used to access external peripherals (NOR, SRAM, NAND, and other specific devices like ethernet controllers). Each device is assigned a CS line and an address range and can have its own configuration (timings, access mode, bus width, ...). This driver provides a generic DT binding to configure a device according to its requirements. For specific device controllers (like the NAND one) the SMC timings should be configured by the controller driver through the matrix and smc syscon regmaps. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-20 03:09:23 +0300