summaryrefslogtreecommitdiff
path: root/drivers/media
AgeCommit message (Collapse)AuthorFilesLines
2014-09-22[media] cx2341x: fix kernel oopsHans Verkuil1-0/+1
The v4l2_ctrl_config struct must be zeroed before passing it to v4l2_ctrl_new_custom(). This was always wrong, but with the recent v4l2-ctrls.c changes this is now much more likely to lead to a kernel bug. This is the only place where this struct wasn't initialized properly. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reported-by: Pridvorov Andrey <ua0lnj@bk.ru> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] cx24123: fix kernel oops due to missing parent pointerHans Verkuil1-0/+1
When I try to set the TV standard to e.g. PAL on my Hauppauge WinTV-HVR3000 I get the following oops: 9464.262345] CX24123: detected CX24123 [ 9464.262526] BUG: unable to handle kernel NULL pointer dereference at 0000000000000230 [ 9464.262555] IP: [<ffffffff816676b5>] acpi_i2c_install_space_handler+0x15/0xc0 [ 9464.262576] PGD 0 [ 9464.262584] Oops: 0000 [#1] PREEMPT SMP [ 9464.262597] Modules linked in: cx24123 cx22702 cx88_dvb(+) videobuf_dvb cx88_vp3054_i2c cx88_blackbird cx8802 ir_lirc_codec ir_xmp_decoder ir_sanyo_decoder ir_jvc_decoder ir_mce_kbd_decoder ir_sharp_decoder lirc_dev ir_sony_decoder ir_rc6_decoder ir_nec_decoder ir_rc5_decoder rc_hauppauge wm8775 tuner_simple tuner_types tda9887 cx8800 cx88xx btcx_risc videobuf_dma_sg videobuf_core mt2131 s5h1409 tda8290 tuner cx25840 cx23885 altera_ci tda18271 altera_stapl videobuf2_dvb tveeprom cx2341x videobuf2_dma_sg dvb_core rc_core videobuf2_memops videobuf2_core v4l2_common videodev media nouveau x86_pkg_temp_thermal cfbfillrect cfbimgblt cfbcopyarea ttm drm_kms_helper processor button isci [ 9464.262786] CPU: 2 PID: 2417 Comm: modprobe Not tainted 3.17.0-rc1-telek #322 [ 9464.262796] Hardware name: ASUSTeK COMPUTER INC. Z9PE-D8 WS/Z9PE-D8 WS, BIOS 5404 02/10/2014 [ 9464.262807] task: ffff881097959ad0 ti: ffff88109967c000 task.ti: ffff88109967c000 [ 9464.262817] RIP: 0010:[<ffffffff816676b5>] [<ffffffff816676b5>] acpi_i2c_install_space_handler+0x15/0xc0 [ 9464.262834] RSP: 0018:ffff88109967fbd8 EFLAGS: 00010246 [ 9464.262843] RAX: 0000000000000000 RBX: ffff880892a89540 RCX: 0000000000000000 [ 9464.262853] RDX: 0000000080000001 RSI: ffff880892e75870 RDI: ffff880892a89540 [ 9464.262862] RBP: ffff88109967fbf8 R08: ffff881099b2ccc0 R09: ffff880891efa088 [ 9464.262872] R10: 0000000000000000 R11: 0000000000000022 R12: 0000000000000000 [ 9464.262883] R13: ffff880892a895b0 R14: 00000000ffffffed R15: ffff88089b48f800 [ 9464.262893] FS: 00007fe42b6d7700(0000) GS:ffff88089fc40000(0000) knlGS:0000000000000000 [ 9464.262904] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9464.262912] CR2: 0000000000000230 CR3: 0000001094078000 CR4: 00000000000407e0 [ 9464.262922] Stack: [ 9464.262927] ffff880892a89540 0000000000000000 ffff880892a895b0 ffff88109a155a80 [ 9464.262944] ffff88109967fc20 ffffffff81666a36 0000000000000020 ffff880892a89540 [ 9464.262960] ffffffffa01c8d40 ffff88109967fc40 ffffffff81666c67 ffff880892a89000 [ 9464.262977] Call Trace: [ 9464.262987] [<ffffffff81666a36>] i2c_register_adapter+0x166/0x340 [ 9464.262998] [<ffffffff81666c67>] i2c_add_adapter+0x57/0x60 [ 9464.263011] [<ffffffffa01e2c58>] cx24123_attach+0x108/0x1ba [cx24123] [ 9464.263025] [<ffffffffa01c5a76>] dvb_register+0x404/0x245b [cx88_dvb] [ 9464.263039] [<ffffffffa0059183>] ? videobuf_queue_core_init+0xe3/0x140 [videobuf_core] [ 9464.263052] [<ffffffffa01c54b1>] cx8802_dvb_probe+0x1e1/0x261 [cx88_dvb] [ 9464.263066] [<ffffffffa01a3b00>] cx8802_register_driver+0x190/0x20d [cx8802] [ 9464.263077] [<ffffffffa01cc000>] ? 0xffffffffa01cc000 [ 9464.263089] [<ffffffffa01cc025>] dvb_init+0x25/0x27 [cx88_dvb] [ 9464.263101] [<ffffffff810002c4>] do_one_initcall+0x84/0x1c0 [ 9464.263113] [<ffffffff811893fa>] ? __vunmap+0x9a/0x100 [ 9464.263125] [<ffffffff81122a66>] load_module+0x1216/0x1790 [ 9464.263134] [<ffffffff8111ff70>] ? __symbol_put+0x70/0x70 [ 9464.263145] [<ffffffff811aa8cc>] ? vfs_read+0x11c/0x170 [ 9464.263156] [<ffffffff811201d9>] ? copy_module_from_fd.isra.53+0x119/0x170 [ 9464.263168] [<ffffffff81123116>] SyS_finit_module+0x76/0x80 [ 9464.263181] [<ffffffff818d19e9>] system_call_fastpath+0x16/0x1b [ 9464.263190] Code: 81 31 c0 e8 2e f6 e8 ff 48 83 c4 08 5b 5d eb de 66 0f 1f 44 00 00 55 48 89 e5 41 56 41 55 41 54 53 41 be ed ff ff ff 48 8b 47 70 <48> 8b 80 30 02 00 00 48 85 c0 74 58 4c 8b 68 08 4d 85 ed 74 4f [ 9464.263347] RIP [<ffffffff816676b5>] acpi_i2c_install_space_handler+0x15/0xc0 [ 9464.263361] RSP <ffff88109967fbd8> [ 9464.263367] CR2: 0000000000000230 [ 9464.266919] ---[ end trace 57fd490bdb72e733 ]--- I traced this to a NULL i2c_adapter parent pointer when cx24123 creates its own i2c adapter. The acpi_i2c_install_space_handler function appeared in 3.17, so that's probably why this hasn't been seen before. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] adv7604: fix inverted conditionHans Verkuil1-1/+1
The log_status function should show HDMI information, but the test checking for an HDMI input was inverted. Fix this. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: stable@vger.kernel.org # for v3.12 and up Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] media/radio: fix radio-miropcm20.c build with io.h header fileRandy Dunlap1-0/+1
Fix build errors in radio-miropcm20.c due to missing header file: drivers/media/radio/radio-miropcm20.c: In function 'rds_waitread': drivers/media/radio/radio-miropcm20.c:90:3: error: implicit declaration of function 'inb' [-Werror=implicit-function-declaration] drivers/media/radio/radio-miropcm20.c: In function 'rds_rawwrite': drivers/media/radio/radio-miropcm20.c:106:3: error: implicit declaration of function 'outb' [-Werror=implicit-function-declaration] Reported-by: Jim Davis <jim.epost@gmail.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] vb2: fix plane index sanity check in vb2_plane_cookie()Zhaowei Yuan1-1/+1
It's also invalid when plane_no is equal to vb->num_planes Signed-off-by: Zhaowei Yuan <zhaowei.yuan@samsung.com> Cc: stable@vger.kernel.org # for v3.7 and up Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] vb2: fix vb2 state check when start_streaming failsHans Verkuil1-7/+10
Commit bd994ddb2a12a3ff48cd549ec82cdceaea9614df (vb2: Fix stream start and buffer completion race) broke the buffer state check in vb2_buffer_done. So accept all three possible states there since I can no longer tell the difference between vb2_buffer_done called from start_streaming or from elsewhere. Instead add a WARN_ON at the end of start_streaming that will check whether any buffers were added to the done list, since that implies that the wrong state was used as well. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: stable@vger.kernel.org # for v3.15 and up Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] videobuf2-core: add comments before the WARN_ONHans Verkuil1-0/+12
Recently WARN_ON() calls have been added to warn if the driver is not properly returning buffers to vb2 in start_streaming (if it fails) or stop_streaming(). Add comments before those WARN_ON calls that refer to the videobuf2-core.h header that explains what drivers are supposed to do in these situations. That should help point developers in the right direction if they see these warnings. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Pawel Osciak <pawel@osciak.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] videobuf2-dma-sg: fix for wrong GFP mask to sg_alloc_table_from_pagesHans Verkuil1-1/+1
sg_alloc_table_from_pages() only allocates a sg_table, so it should just use GFP_KERNEL, not gfp_flags. If gfp_flags contains __GFP_DMA32 then mm/sl[au]b.c will call BUG_ON: [ 358.027515] ------------[ cut here ]------------ [ 358.027546] kernel BUG at mm/slub.c:1416! [ 358.027558] invalid opcode: 0000 [#1] PREEMPT SMP [ 358.027576] Modules linked in: mt2131 s5h1409 tda8290 tuner cx25840 cx23885 btcx_risc altera_ci tda18271 altera_stapl videobuf2_dvb tveeprom cx2341x videobuf2_dma_sg dvb_core rc_core videobuf2_memops videobuf2_core nouveau zr36067 videocodec v4l2_common videodev media x86_pkg_temp_thermal cfbfillrect cfbimgblt cfbcopyarea ttm drm_kms_helper processor button isci [ 358.027712] CPU: 19 PID: 3654 Comm: cat Not tainted 3.16.0-rc6-telek #167 [ 358.027723] Hardware name: ASUSTeK COMPUTER INC. Z9PE-D8 WS/Z9PE-D8 WS, BIOS 5404 02/10/2014 [ 358.027741] task: ffff880897c7d960 ti: ffff88089b4d4000 task.ti: ffff88089b4d4000 [ 358.027753] RIP: 0010:[<ffffffff81196040>] [<ffffffff81196040>] new_slab+0x280/0x320 [ 358.027776] RSP: 0018:ffff88089b4d7ae8 EFLAGS: 00010002 [ 358.027787] RAX: ffff880897c7d960 RBX: 0000000000000000 RCX: ffff88089b4d7b50 [ 358.027798] RDX: 00000000ffffffff RSI: 0000000000000004 RDI: ffff88089f803b00 [ 358.027809] RBP: ffff88089b4d7bb8 R08: 0000000000000000 R09: 0000000100400040 [ 358.027821] R10: 0000160000000000 R11: ffff88109bc02c40 R12: 0000000000000001 [ 358.027832] R13: ffff88089f8000c0 R14: ffff88089f803b00 R15: ffff8810bfcf4be0 [ 358.027845] FS: 00007f83fe5c0700(0000) GS:ffff8810bfce0000(0000) knlGS:0000000000000000 [ 358.027858] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 358.027868] CR2: 0000000001dfd568 CR3: 0000001097d5a000 CR4: 00000000000407e0 [ 358.027878] Stack: [ 358.027885] ffffffff81198860 ffff8810bfcf4be0 ffff880897c7d960 0000000000001b00 [ 358.027905] ffff880897c7d960 0000000000000000 ffff8810bfcf4bf0 0000000000000000 [ 358.027924] 0000000000000000 0000000100000100 ffffffff813ef84a 00000004ffffffff [ 358.027944] Call Trace: [ 358.027956] [<ffffffff81198860>] ? __slab_alloc+0x400/0x4e0 [ 358.027973] [<ffffffff813ef84a>] ? sg_kmalloc+0x1a/0x30 [ 358.027985] [<ffffffff81198f17>] __kmalloc+0x127/0x150 [ 358.027997] [<ffffffff813ef84a>] ? sg_kmalloc+0x1a/0x30 [ 358.028009] [<ffffffff813ef84a>] sg_kmalloc+0x1a/0x30 [ 358.028023] [<ffffffff813eff84>] __sg_alloc_table+0x74/0x180 [ 358.028035] [<ffffffff813ef830>] ? sg_kfree+0x20/0x20 [ 358.028048] [<ffffffff813f00af>] sg_alloc_table+0x1f/0x60 [ 358.028061] [<ffffffff813f0174>] sg_alloc_table_from_pages+0x84/0x1f0 [ 358.028077] [<ffffffffa007c3f9>] vb2_dma_sg_alloc+0x159/0x230 [videobuf2_dma_sg] [ 358.028095] [<ffffffffa003d55a>] __vb2_queue_alloc+0x10a/0x680 [videobuf2_core] [ 358.028113] [<ffffffffa003e110>] __reqbufs.isra.14+0x220/0x3e0 [videobuf2_core] [ 358.028130] [<ffffffffa003e79d>] __vb2_init_fileio+0xbd/0x380 [videobuf2_core] [ 358.028147] [<ffffffffa003f563>] __vb2_perform_fileio+0x5b3/0x6e0 [videobuf2_core] [ 358.028164] [<ffffffffa003f871>] vb2_fop_read+0xb1/0x100 [videobuf2_core] [ 358.028184] [<ffffffffa06dd2e5>] v4l2_read+0x65/0xb0 [videodev] [ 358.028198] [<ffffffff811a243f>] vfs_read+0x8f/0x170 [ 358.028210] [<ffffffff811a30a1>] SyS_read+0x41/0xb0 [ 358.028224] [<ffffffff818f02e9>] system_call_fastpath+0x16/0x1b [ 358.028234] Code: 66 90 e9 dc fd ff ff 0f 1f 40 00 41 8b 4d 68 e9 d5 fe ff ff 0f 1f 80 00 00 00 00 f0 41 80 4d 00 40 e9 03 ff ff ff 0f 1f 44 00 00 <0f> 0b 66 0f 1f 44 00 00 44 89 c6 4c 89 45 d0 e8 0c 82 ff ff 48 [ 358.028415] RIP [<ffffffff81196040>] new_slab+0x280/0x320 [ 358.028432] RSP <ffff88089b4d7ae8> [ 358.032208] ---[ end trace 6443240199c706e4 ]--- Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: stable@vger.kernel.org # for v3.13 and up Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] cx23885: fix size helper functionsHans Verkuil2-8/+3
The norm_swidth function was unused and is dropped. It's not clear what the purpose of that function was. The norm_maxh function was changed so it tests for 60 Hz standards rather than for 50 Hz standards. The is the preferred order. The norm_maxw function was poorly written and used: it gives the maximum allowed line width for the given standard. For 60 Hz that's 720, but for 50 Hz that's 768 which allows for 768x576 which gives you square pixels. For 60 Hz formats it is 640x480 that gives square pixels, so there is no need to go beyond 720. The initial width was set using norm_maxh(), which was wrong. Just set to 720, that's what you normally use. Since the initial standard was NTSC anyway the initial width was always 720 anyway. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] cx23885: fix VBI supportHans Verkuil2-6/+6
Tested VBI support and discovered that the wrong offset was used. After this change it is now working. Verified with CC/XDS for NTSC and WSS/Teletext on PAL. It also reported the wrong start lines for the second field. That's now fixed as well. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] adv7604/adv7842: fix il_vbackporch typo and zero the structHans Verkuil2-2/+4
Both adv7604 and adv7842 had the same typo in the code that sets the vertical backporch for the second interlaced field: it was assigned to vbackporch instead of il_vbackporch. In addition, the timings struct wasn't zeroed in the adv7842 driver, leaving several fields to undefined values causing the timing match function to fail. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] v4l2-dv-timings: only check standards if non-zeroHans Verkuil1-1/+2
If one or both of the timings being compared have the standards field with value 0, then accept that. Only check for matching standards if both timings have actually filled in that field. Otherwise no match will ever be found since when timings are detected the standards field will typically be set to 0 by the driver. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] vivid: add teletext support to VBI captureHans Verkuil6-21/+111
This is useful to test teletext capture applications like alevt and mtt. It also fixes a previously undetected bug where the PAL VBI start line of the second field was off by one. Using the new field start defines helps a lot fixing such bugs. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] v4l2: uvcvideo: Allow using larger buffersGuennadi Liakhovetski3-1/+4
A test in uvc_video_decode_isoc() checks whether an image has been received from the camera completely. For this the data amount is compared to the buffer length, which, however, doesn't have to be equal to the image size. Switch to using formats .sizeimage field for an exact expected image size. [Renamed image_size to frame_size] Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] hackrf: Fix a long constantMauro Carvalho Chehab1-1/+1
drivers/media/usb/hackrf/hackrf.c:64:3: warning: this decimal constant is unsigned only in ISO C90 [enabled by default] .rangehigh = 4294967294, /* max u32, hw goes over 7GHz */ ^ Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] hackrf: HackRF SDR driverAntti Palosaari5-2/+1157
V4L2 driver for HackRF SDR. Very basic version, with reduced feature set. Driver implements receiver only, hardware supports also transmitter. USB ID 1d50:6089. Model HackRF One Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] media: Use strlcpy instead of custom codeLaurent Pinchart1-4/+2
Replace strncpy + manually setting the terminating '\0' with an strlcpy call. Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] media: usb: uvc: add a quirk for Dell XPS M1330 webcamPaul Fertser1-0/+9
As reported on [1], this device needs this quirk to be able to reliably initialise the webcam. [1] http://ubuntuforums.org/showthread.php?t=2145996 Cc: stable@vger.kernel.org Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] uvcvideo: Work around buggy Logitech C920 firmwareWilliam Manley4-3/+19
The uvcvideo webcam driver exposes the v4l2 control "Exposure (Absolute)" which allows the user to control the exposure time of the webcam, essentially controlling the brightness of the received image. By default the webcam automatically adjusts the exposure time automatically but the if you set the control "Exposure, Auto"="Manual Mode" the user can fix the exposure time. Unfortunately it seems that the Logitech C920 has a firmware bug where it will forget that it's in manual mode temporarily during initialisation. This means that the camera doesn't respect the exposure time that the user requested if they request it before starting to stream video. They end up with a video stream which is either too bright or too dark and must reset the controls after video starts streaming. This patch introduces the quirk UVC_QUIRK_RESTORE_CTRLS_ON_INIT which causes the cached controls to be re-uploaded to the camera immediately after initialising the camera. This quirk is applied to the C920 to work around this camera bug. Signed-off-by: William Manley <will@williammanley.net> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] v4l: uvcvideo: Add support for pan/tilt speed controlsVincent Palatin1-3/+55
Map V4L2_CID_TILT_SPEED and V4L2_CID_PAN_SPEED to the standard UVC CT_PANTILT_RELATIVE_CONTROL terminal control request. Tested by plugging a Logitech ConferenceCam C3000e USB camera and controlling pan/tilt from the userspace using the VIDIOC_S_CTRL ioctl. Verified that it can pan and tilt at the same time in both directions. Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Reviewed-by: Pawel Osciak <posciak@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] v4l: Add camera pan/tilt speed controlsVincent Palatin1-0/+2
The V4L2_CID_PAN_SPEED and V4L2_CID_TILT_SPEED controls allow to move the camera by setting its rotation speed around its axis. Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Reviewed-by: Pawel Osciak <posciak@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] media: davinci: remove unneeded dependency ARCH_OMAP3Prabhakar Lad2-3/+1
this patch removes unneeded dependency of ARCH_OMAP3 on VIDEO_DM6446_CCDC. Also the top level platform Makefile descended into davinci/ without any dependency so just drop the dependency obj-y, as obj-$(CONFIG_ARCH_DAVINCI) already exists. Reported-by: Andreas Ruprecht <rupran@einserver.de> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] media: davinci: vpif_capture: fix the check on suspend/resume callbacksPrabhakar Lad1-2/+2
It is possible to call STREAMON without having any buffers queued. So vb2_is_streaming() can return true without start_streaming() having been called. Only after at least one buffer has been queued will start_streaming be called. The check vb2_is_streaming() is incorrect as this would start the DMA without having proper DMA pointers set up. this patch uses vb2_start_streaming_called() instead to check is streaming was called. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] media: davinci: vpif_display: fix the check on suspend/resume callbacksPrabhakar Lad1-2/+2
It is possible to call STREAMON without having any buffers queued. So vb2_is_streaming() can return true without start_streaming() having been called. Only after at least one buffer has been queued will start_streaming be called. The check vb2_is_streaming() is incorrect as this would start the DMA without having proper DMA pointers set up. this patch uses vb2_start_streaming_called() instead to check is streaming was called. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] media: davinci: vpif_capture: drop setting of vb2 buffer state to ACTIVEPrabhakar Lad1-3/+0
this patch drops setting of vb2 buffer state to VB2_BUF_STATE_ACTIVE, as any buffer queued to the driver is marked ACTIVE by the vb2 core. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] media: davinci: vpif_display: drop setting of vb2 buffer state to ACTIVEPrabhakar Lad1-4/+0
this patch drops setting of vb2 buffer state to VB2_BUF_STATE_ACTIVE, as any buffer queued to the driver is marked ACTIVE by the vb2 core. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] videobuf: Allow reqbufs(0) to free current buffersHans de Goede1-5/+6
All the infrastructure for this is already there, and despite our desires for the old videobuf code to go away, it is currently still in use in 18 drivers. Allowing reqbufs(0) makes these drivers behave consistent with modern drivers, making live easier for userspace, see e.g. : https://bugzilla.gnome.org/show_bug.cgi?id=735660 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] videobuf2-core: take mmap_sem before calling __qbuf_userptrHans Verkuil1-0/+2
(Changes since v2: dropped local variable as suggested by Laurent) Commit f035eb4e976ef5a059e30bc91cfd310ff030a7d3 (videobuf2: fix lockdep warning) unfortunately removed the mmap_sem lock that is needed around the call to __qbuf_userptr. Amazingly nobody noticed this (especially me as the author) until Jan Kara pointed this out to me. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reported-by: Jan Kara <jack@suse.cz> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] drivers: media: i2c: adv7343_regs.h: Fix typo in #ifndefRasmus Villemoes1-1/+1
Test for definedness of the macro which is actually defined, and which matches the name of the file. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] drivers: media: b2c2: flexcop.h: Fix typo in include guardRasmus Villemoes1-1/+1
Three trailing underscores is one too many. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] tvp7002: Don't update device->streaming if write to register failsAxel Lin1-13/+8
This ensures device->streaming has correct status. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] radio-si470x-usb: use USB API functions rather than constantsHimangi Saraogi1-3/+1
This patch introduces the use of the function usb_endpoint_is_int_in. The Coccinelle semantic patch that makes these changes is as follows: @@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) == - \(USB_DIR_IN\|0x80\)) + usb_endpoint_dir_in(epd) @@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) == - \(USB_ENDPOINT_XFER_INT\|3\)) + usb_endpoint_xfer_int(epd) @@ struct usb_endpoint_descriptor *epd; @@ - (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd)) + usb_endpoint_is_int_in(epd) Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] tda18212: convert to RegMap APIAntti Palosaari2-114/+18
Use RegMap API to handle all the boring I2C register access boilerplate stuff. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] tda18212: rename state from 'priv' to 'dev'Antti Palosaari1-53/+51
foo_dev seems to be most correct term for the structure holding data of each device instance. It is most used term in Kernel codebase and also examples from book Linux Device Drivers, Third Edition, uses it. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] tda18212: clean loggingAntti Palosaari1-17/+18
There is no need to print module name nor function name as those are done by kernel logging system when dev_xxx logging is used and driver is proper I2C driver. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] tda18212: convert driver to I2C bindingAntti Palosaari2-64/+79
Convert driver from DVB proprietary model to common I2C model. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] em28xx: convert tda18212 tuner to I2C clientAntti Palosaari1-6/+26
Used tda18212 tuner is implemented as a I2C driver. Use em28xx tuner I2C client for tda18212 driver. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] anysee: convert tda18212 tuner to I2C clientAntti Palosaari2-36/+152
Used tda18212 tuner is implemented as I2C driver. Implement I2C client to anysee and use it for tda18212. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] tda18212: prepare for I2C client conversionAntti Palosaari1-0/+5
We need carry pointer to frontend via config struct (I2C platform_data ptr) when I2C model is used. Add that pointer first in order to keep build unbreakable during conversion. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] af9033: init DVBv5 statisticsAntti Palosaari1-0/+14
We need to init supported stats here in order signal app which stats are supported. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] af9035: remove I2C client differentlyAntti Palosaari1-26/+67
It crash kernel when device was removed while it was streaming. That is because we removed driver and frontend thread was still running. Use new callback which allows I2C driver removal just after frontend is unregistered. V2: fixed by reported by Daniel Reported-by: Daniel Glöckner <daniel-gl@gmx.net> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] dvb-usb-v2: add tuner_detach callbackAntti Palosaari2-0/+9
Add tuner_detach callback in order to allow custom detach. It is needed when tuner driver is implemented I2C client or some other kernel bus, but not proprietary dvb_attach / dvb_detach. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] dvb-usb-v2: add frontend_detach callbackAntti Palosaari2-3/+15
Add frontend_detach callback in order to allow custom detach. It is needed when demod driver is implemented I2C client or some other kernel bus, but not proprietary dvb_attach / dvb_detach. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] af9033: remove all DVBv3 stat calculation logicAntti Palosaari1-49/+0
Statistics are now calculated for DVBv5 and those DVBv5 values are returned for legacy DVBv3 calls also. So we could remove all old statistics calculation logic. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] af9033: wrap DVBv3 BER to DVBv5 BERAntti Palosaari1-6/+3
DVBv5 BER is calculated anyway, so just return it for legacy read_ber() API too. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] af9033: wrap DVBv3 UCB to DVBv5 UCB statsAntti Palosaari1-7/+1
Remove 'duplicate' DVBv3 read UCB implementation and return value, calculated already for DVBv5 statistics. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] af9033: implement DVBv5 post-Viterbi BERAntti Palosaari1-0/+15
Implement following DTV API commands: DTV_STAT_POST_ERROR_BIT_COUNT DTV_STAT_POST_TOTAL_BIT_COUNT These will provide post-Viterbi bit error rate reporting. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] af9033: implement DVBv5 stat block countersAntti Palosaari1-1/+32
Implement following API commands: DTV_STAT_ERROR_BLOCK_COUNT DTV_STAT_TOTAL_BLOCK_COUNT These returns total and uncorrected error packets from outer FEC. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] af9033: wrap DVBv3 read SNR to DVBv5 CNRAntti Palosaari2-46/+7
Remove 'duplicate' DVBv3 read SNR implementation and return value, calculated already by DVBv5 CNR, from the cache. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-09-22[media] af9033: implement DVBv5 statistics for CNRAntti Palosaari1-2/+52
Return CNR via DVBv5 statistics API. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-03 04:11:40 +0300