summaryrefslogtreecommitdiff
path: root/drivers/media
AgeCommit message (Collapse)AuthorFilesLines
2020-01-09media: usb: fix memory leak in af9005_identify_stateNavid Emamdoost1-2/+3
commit 2289adbfa559050d2a38bcd9caac1c18b800e928 upstream. In af9005_identify_state when returning -EIO the allocated buffer should be released. Replace the "return -EIO" with assignment into ret and move deb_info() under a check. Fixes: af4e067e1dcf ("V4L/DVB (5625): Add support for the AF9005 demodulator from Afatech") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-09media: flexcop-usb: ensure -EIO is returned on error conditionColin Ian King1-1/+1
commit 74a96b51a36de4d86660fbc56b05d86668162d6b upstream. An earlier commit hard coded a return 0 to function flexcop_usb_i2c_req even though the an -EIO was intended to be returned in the case where ret != buflen. Fix this by replacing the return 0 with the return of ret to return the error return code. Addresses-Coverity: ("Unused value") Fixes: b430eaba0be5 ("[media] flexcop-usb: don't use stack for DMA") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-09media: cec: check 'transmit_in_progress', not 'transmitting'Hans Verkuil1-8/+12
commit ac479b51f3f4aaa852b5d3f00ecfb9290230cf64 upstream. Currently wait_event_interruptible_timeout is called in cec_thread_func() when adap->transmitting is set. But if the adapter is unconfigured while transmitting, then adap->transmitting is set to NULL. But the hardware is still actually transmitting the message, and that's indicated by adap->transmit_in_progress and we should wait until that is finished or times out before transmitting new messages. As the original commit says: adap->transmitting is the userspace view, adap->transmit_in_progress reflects the hardware state. However, if adap->transmitting is NULL and adap->transmit_in_progress is true, then wait_event_interruptible is called (no timeout), which can get stuck indefinitely if the CEC driver is flaky and never marks the transmit-in-progress as 'done'. So test against transmit_in_progress when deciding whether to use the timeout variant or not, instead of testing against adap->transmitting. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: 32804fcb612b ("media: cec: keep track of outstanding transmits") Cc: <stable@vger.kernel.org> # for v4.19 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-09media: cec: avoid decrementing transmit_queue_sz if it is 0Hans Verkuil1-2/+12
commit 95c29d46ab2a517e4c26d0a07300edca6768db17 upstream. WARN if transmit_queue_sz is 0 but do not decrement it. The CEC adapter will become unresponsive if it goes below 0 since then it thinks there are 4 billion messages in the queue. Obviously this should not happen, but a driver bug could cause this. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: <stable@vger.kernel.org> # for v4.12 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-09media: cec: CEC 2.0-only bcast messages were ignoredHans Verkuil1-3/+3
commit cec935ce69fc386f13959578deb40963ebbb85c3 upstream. Some messages are allowed to be a broadcast message in CEC 2.0 only, and should be ignored by CEC 1.4 devices. Unfortunately, the check was wrong, causing such messages to be marked as invalid under CEC 2.0. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: <stable@vger.kernel.org> # for v4.10 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-09media: pulse8-cec: fix lost cec_transmit_attempt_done() callHans Verkuil1-4/+13
commit e5a52a1d15c79bb48a430fb263852263ec1d3f11 upstream. The periodic PING command could interfere with the result of a CEC transmit, causing a lost cec_transmit_attempt_done() call. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: <stable@vger.kernel.org> # for v4.10 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-31media: vim2m: media_device_cleanup was called too earlyHans Verkuil1-1/+3
[ Upstream commit 9f22e88a4bba270d3427684cee84dfbf67489e86 ] Running the contrib/test/test-media script in v4l-utils with the vim2m argument will cause this kernel warning: [ 554.430157] ------------[ cut here ]------------ [ 554.433034] DEBUG_LOCKS_WARN_ON(lock->magic != lock) [ 554.433064] WARNING: CPU: 0 PID: 616 at kernel/locking/mutex.c:938 __mutex_lock+0xd7a/0x1380 [ 554.439736] Modules linked in: vim2m v4l2_mem2mem vivid rc_cec videobuf2_dma_contig v4l2_dv_timings cec videobuf2_vmalloc videobuf2_memops v4l2_tpg videobuf2_v4l2 videobuf2_common videodev mc rc_core [last unloaded: vivid] [ 554.445794] CPU: 0 PID: 616 Comm: sleep Not tainted 5.4.0-rc1-virtme #1 [ 554.448481] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014 [ 554.453088] RIP: 0010:__mutex_lock+0xd7a/0x1380 [ 554.454955] Code: d2 0f 85 de 05 00 00 44 8b 05 82 d9 f7 00 45 85 c0 0f 85 bf f3 ff ff 48 c7 c6 e0 30 a6 b7 48 c7 c7 e0 2e a6 b7 e8 5c 76 36 fe <0f> 0b e9 a5 f3 ff ff 65 48 8b 1c 25 80 ef 01 00 be 08 00 00 00 48 [ 554.462836] RSP: 0018:ffff88803a4cfad0 EFLAGS: 00010282 [ 554.465129] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffffb5a3d24f [ 554.468143] RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffffb85273f4 [ 554.471000] RBP: ffff88803a4cfc50 R08: fffffbfff701e681 R09: fffffbfff701e681 [ 554.473990] R10: fffffbfff701e680 R11: ffffffffb80f3403 R12: 0000000000000000 [ 554.476831] R13: dffffc0000000000 R14: ffffffffb9714f00 R15: ffff888053103fc8 [ 554.479622] FS: 00007fac6358a540(0000) GS:ffff88805d000000(0000) knlGS:0000000000000000 [ 554.482673] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 554.484949] CR2: 00007fac6343faf0 CR3: 0000000036c22000 CR4: 00000000003406f0 [ 554.487811] Call Trace: [ 554.488860] ? v4l2_release+0x1b8/0x390 [videodev] [ 554.490818] ? do_exit+0x946/0x2980 [ 554.492269] ? mutex_lock_io_nested+0x1250/0x1250 [ 554.494128] ? __lock_acquire+0xe90/0x3c30 [ 554.495774] ? fsnotify_first_mark+0x120/0x120 [ 554.497487] ? vim2m_device_release+0x50/0x50 [vim2m] [ 554.499469] ? v4l2_release+0x1b8/0x390 [videodev] [ 554.501493] v4l2_release+0x1b8/0x390 [videodev] [ 554.503430] __fput+0x256/0x790 [ 554.504711] task_work_run+0x109/0x190 [ 554.506145] do_exit+0x95e/0x2980 [ 554.507421] ? vfs_lock_file+0x21/0xf0 [ 554.509013] ? find_held_lock+0x33/0x1c0 [ 554.510382] ? __close_fd+0xee/0x190 [ 554.511862] ? release_task.part.21+0x1310/0x1310 [ 554.513701] ? lock_downgrade+0x6d0/0x6d0 [ 554.515299] do_group_exit+0xeb/0x2d0 [ 554.516862] __x64_sys_exit_group+0x35/0x40 [ 554.518610] do_syscall_64+0x90/0x450 [ 554.520142] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 554.522289] RIP: 0033:0x7fac6348ecf6 [ 554.523876] Code: Bad RIP value. [ 554.525294] RSP: 002b:00007ffe6373dc58 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 [ 554.528555] RAX: ffffffffffffffda RBX: 00007fac6357f760 RCX: 00007fac6348ecf6 [ 554.531537] RDX: 0000000000000000 RSI: 000000000000003c RDI: 0000000000000000 [ 554.534709] RBP: 0000000000000000 R08: 00000000000000e7 R09: ffffffffffffff80 [ 554.536752] R10: 00007ffe6373db24 R11: 0000000000000246 R12: 00007fac6357f760 [ 554.538643] R13: 0000000000000002 R14: 00007fac63588428 R15: 0000000000000000 [ 554.540634] irq event stamp: 21731 [ 554.541618] hardirqs last enabled at (21731): [<ffffffffb75b3cd4>] _raw_spin_unlock_irq+0x24/0x30 [ 554.544145] hardirqs last disabled at (21730): [<ffffffffb75b3ada>] _raw_spin_lock_irq+0xa/0x40 [ 554.547027] softirqs last enabled at (20148): [<ffffffffb780064d>] __do_softirq+0x64d/0x906 [ 554.550385] softirqs last disabled at (19857): [<ffffffffb5926bd5>] irq_exit+0x175/0x1a0 [ 554.553668] ---[ end trace a389c80c2ca84244 ]--- This is caused by media_device_cleanup() which destroys v4l2_dev->mdev->req_queue_mutex. But v4l2_release() tries to lock that mutex after media_device_cleanup() is called. By moving media_device_cleanup() to the video_device's release function it is guaranteed that the mutex is valid whenever v4l2_release is called. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: vicodec: media_device_cleanup was called too earlyHans Verkuil1-1/+3
[ Upstream commit 693c5f144aeb9636ae161a3c61a838c50b2ae41c ] Running the contrib/test/test-media script in v4l-utils with the vicodec argument will cause this kernel warning: [ 372.298824] ------------[ cut here ]------------ [ 372.298848] DEBUG_LOCKS_WARN_ON(lock->magic != lock) [ 372.298896] WARNING: CPU: 11 PID: 2220 at kernel/locking/mutex.c:938 __mutex_lock+0x919/0xc10 [ 372.298907] Modules linked in: vicodec v4l2_mem2mem vivid rc_cec v4l2_tpg videobuf2_dma_contig cec rc_core v4l2_dv_timings videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc vmw_balloon vmw_vmci button vmwgfx [last unloaded: vimc] [ 372.298961] CPU: 11 PID: 2220 Comm: sleep Not tainted 5.4.0-rc1-test-no #150 [ 372.298970] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/29/2019 [ 372.298983] RIP: 0010:__mutex_lock+0x919/0xc10 [ 372.298995] Code: 59 83 e8 9a fc 16 ff 44 8b 05 23 61 38 01 45 85 c0 0f 85 ef f7 ff ff 48 c7 c6 a0 1f 87 82 48 c7 c7 a0 1e 87 82 e8 cd bb f7 fe <0f> 0b e9 d5 f7 ff ff f6 c3 04 0f 84 3b fd ff ff 49 89 df 41 83 e7 [ 372.299004] RSP: 0018:ffff8881b400fb80 EFLAGS: 00010286 [ 372.299014] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 372.299022] RDX: 0000000000000003 RSI: 0000000000000004 RDI: ffffed1036801f62 [ 372.299030] RBP: ffff8881b400fcf0 R08: ffffffff81217c91 R09: fffffbfff061c271 [ 372.299038] R10: fffffbfff061c270 R11: ffffffff830e1383 R12: ffff88814761dc80 [ 372.299046] R13: 0000000000000000 R14: ffff88814761cbf0 R15: ffff88814761d030 [ 372.299055] FS: 0000000000000000(0000) GS:ffff8881b68c0000(0000) knlGS:0000000000000000 [ 372.299063] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 372.299071] CR2: 00007f606d78aa20 CR3: 0000000003013002 CR4: 00000000001606e0 [ 372.299153] Call Trace: [ 372.299176] ? __kasan_slab_free+0x12f/0x180 [ 372.299187] ? kmem_cache_free+0x9b/0x250 [ 372.299200] ? do_exit+0xcdf/0x1200 [ 372.299210] ? do_group_exit+0x85/0x130 [ 372.299220] ? __x64_sys_exit_group+0x23/0x30 [ 372.299231] ? do_syscall_64+0x5e/0x1c0 [ 372.299241] ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 372.299295] ? v4l2_release+0xed/0x190 [videodev] [ 372.299309] ? mutex_lock_io_nested+0xb80/0xb80 [ 372.299323] ? find_held_lock+0x85/0xa0 [ 372.299335] ? fsnotify+0x5b0/0x600 [ 372.299351] ? locks_remove_file+0x78/0x2b0 [ 372.299363] ? __fsnotify_update_child_dentry_flags.part.0+0x170/0x170 [ 372.299383] ? vidioc_querycap+0x50/0x50 [vicodec] [ 372.299426] ? v4l2_release+0xed/0x190 [videodev] [ 372.299467] v4l2_release+0xed/0x190 [videodev] [ 372.299484] __fput+0x15a/0x390 [ 372.299499] task_work_run+0xb2/0xe0 [ 372.299512] do_exit+0x4d0/0x1200 [ 372.299528] ? do_user_addr_fault+0x367/0x610 [ 372.299538] ? release_task+0x990/0x990 [ 372.299552] ? rwsem_spin_on_owner+0x170/0x170 [ 372.299567] ? vmacache_find+0xb2/0x100 [ 372.299580] do_group_exit+0x85/0x130 [ 372.299592] __x64_sys_exit_group+0x23/0x30 [ 372.299602] do_syscall_64+0x5e/0x1c0 [ 372.299614] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 372.299624] RIP: 0033:0x7f606d74a9d6 [ 372.299640] Code: Bad RIP value. [ 372.299648] RSP: 002b:00007fff65364468 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 [ 372.299658] RAX: ffffffffffffffda RBX: 00007f606d83b760 RCX: 00007f606d74a9d6 [ 372.299666] RDX: 0000000000000000 RSI: 000000000000003c RDI: 0000000000000000 [ 372.299673] RBP: 0000000000000000 R08: 00000000000000e7 R09: ffffffffffffff80 [ 372.299681] R10: 00007fff65364334 R11: 0000000000000246 R12: 00007f606d83b760 [ 372.299689] R13: 0000000000000002 R14: 00007f606d844428 R15: 0000000000000000 [ 372.299704] ---[ end trace add7d62ca4bc65e3 ]--- This is caused by media_device_cleanup() which destroys v4l2_dev->mdev->req_queue_mutex. But v4l2_release() tries to lock that mutex after media_device_cleanup() is called. By moving media_device_cleanup() to the v4l2_device's release function it is guaranteed that the mutex is valid whenever v4l2_release is called. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: v4l2-ctrl: Lock main_hdl on operations of requests_queued.Pi-Hsun Shih1-0/+7
[ Upstream commit df4a3e7f88e3b0d7ae46d70b9ff8e3c0ea730785 ] There's a race condition between the list_del_init in the v4l2_ctrl_request_complete, and the list_add_tail in the v4l2_ctrl_request_queue, since they can be called in different thread and the requests_queued list is not protected by a lock. This can lead to that the v4l2_ctrl_handler is still in the requests_queued list while the request_is_queued is already set to false, which would cause use-after-free if the v4l2_ctrl_handler is later released. Fix this by locking the ->lock of main_hdl (which is the owner of the requests_queued list) when doing list operations on the ->requests_queued list. Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: si470x-i2c: add missed operations in removeChuhong Yuan1-0/+2
[ Upstream commit 2df200ab234a86836a8879a05a8007d6b884eb14 ] The driver misses calling v4l2_ctrl_handler_free and v4l2_device_unregister in remove like what is done in probe failure. Add the calls to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: pvrusb2: Fix oops on tear-down when radio support is not presentMike Isely1-2/+7
[ Upstream commit 7f404ae9cf2a285f73b3c18ab9303d54b7a3d8e1 ] In some device configurations there's no radio or radio support in the driver. That's OK, as the driver sets itself up accordingly. However on tear-down in these caes it's still trying to tear down radio related context when there isn't anything there, leading to dereferences through a null pointer and chaos follows. How this bug survived unfixed for 11 years in the pvrusb2 driver is a mystery to me. [hverkuil: fix two checkpatch warnings] Signed-off-by: Mike Isely <isely@pobox.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: exynos4-is: fix wrong mdev and v4l2 dev order in error pathSeung-Woo Kim1-3/+4
[ Upstream commit 4d741cbd58bf889c8a68cf6e592a7892b5c2802e ] When driver is built as module and probe during insmod is deferred because of sensor subdevs, there is NULL pointer deference because mdev is cleaned up and then access it from v4l2_device_unregister(). Fix the wrong mdev and v4l2 dev order in error path of probe. This fixes below null pointer deference: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = ca026f68 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM [...] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) PC is at ida_free+0x7c/0x160 LR is at xas_start+0x44/0x204 [...] [<c0dafd60>] (ida_free) from [<c083c20c>] (__media_device_unregister_entity+0x18/0xc0) [<c083c20c>] (__media_device_unregister_entity) from [<c083c2e0>] (media_device_unregister_entity+0x2c/0x38) [<c083c2e0>] (media_device_unregister_entity) from [<c0843404>] (v4l2_device_release+0xd0/0x104) [<c0843404>] (v4l2_device_release) from [<c0632558>] (device_release+0x28/0x98) [<c0632558>] (device_release) from [<c0db1204>] (kobject_put+0xa4/0x208) [<c0db1204>] (kct_put) from [<bf00bac4>] (fimc_capture_subdev_unregistered+0x58/0x6c [s5p_fimc]) [<bf00bac4>] (fimc_capture_subdev_unregistered [s5p_fimc]) from [<c084a1cc>] (v4l2_device_unregister_subdev+0x6c/0xa8) [<c084a1cc>] (v4l2_device_unregister_subdev) from [<c084a350>] (v4l2_device_unregister+0x64/0x94) [<c084a350>] (v4l2_device_unregister) from [<bf0101ac>] (fimc_md_probe+0x4ec/0xaf8 [s5p_fimc]) [...] Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Fixes: 9832e155f1ed ("[media] media-device: split media initialization and registration") Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: vivid: media_device_cleanup was called too earlyHans Verkuil1-1/+3
[ Upstream commit 8ffd573c25e5fac1daeeffc592e2ed6bc6a3d947 ] Running the contrib/test/test-media script in v4l-utils with the vivid argument will cause this kernel warning: [ 104.748720] videodev: v4l2_release [ 104.748731] ------------[ cut here ]------------ [ 104.748750] DEBUG_LOCKS_WARN_ON(lock->magic != lock) [ 104.748790] WARNING: CPU: 6 PID: 1823 at kernel/locking/mutex.c:938 __mutex_lock+0x919/0xc10 [ 104.748800] Modules linked in: rc_cec vivid v4l2_tpg videobuf2_dma_contig cec rc_core v4l2_dv_timings videobuf2_vmalloc videobuf2_memops videobuf2_v4l2 videobuf2_common videodev mc vmw_balloon vmw_vmci button vmwgfx [ 104.748845] CPU: 6 PID: 1823 Comm: sleep Not tainted 5.4.0-rc1-test-no #150 [ 104.748853] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/29/2019 [ 104.748867] RIP: 0010:__mutex_lock+0x919/0xc10 [ 104.748878] Code: 59 83 e8 9a fc 16 ff 44 8b 05 23 61 38 01 45 85 c0 0f 85 ef f7 ff ff 48 c7 c6 a0 1f 87 82 48 c7 c7 a0 1e 87 82 e8 cd bb f7 fe <0f> 0b e9 d5 f7 ff ff f6 c3 04 0f 84 3b fd ff ff 49 89 df 41 83 e7 [ 104.748886] RSP: 0018:ffff88811a357b80 EFLAGS: 00010286 [ 104.748895] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 104.748902] RDX: 0000000000000003 RSI: 0000000000000004 RDI: ffffed102346af62 [ 104.748910] RBP: ffff88811a357cf0 R08: ffffffff81217c91 R09: fffffbfff061c271 [ 104.748917] R10: fffffbfff061c270 R11: ffffffff830e1383 R12: ffff8881a46103c0 [ 104.748924] R13: 0000000000000000 R14: ffff8881a4614f90 R15: ffff8881a46153d0 [ 104.748933] FS: 0000000000000000(0000) GS:ffff8881b6780000(0000) knlGS:0000000000000000 [ 104.748940] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 104.748949] CR2: 00007f163fc9ca20 CR3: 0000000003013004 CR4: 00000000001606e0 [ 104.749036] Call Trace: [ 104.749051] ? _raw_spin_unlock+0x1f/0x30 [ 104.749067] ? llist_add_batch+0x33/0x50 [ 104.749081] ? tick_nohz_tick_stopped+0x19/0x30 [ 104.749130] ? v4l2_release.cold+0x6c/0xd6 [videodev] [ 104.749143] ? mutex_lock_io_nested+0xb80/0xb80 [ 104.749153] ? vprintk_emit+0xf2/0x220 [ 104.749191] ? vivid_req_validate+0x40/0x40 [vivid] [ 104.749201] ? printk+0xad/0xde [ 104.749211] ? kmsg_dump_rewind_nolock+0x54/0x54 [ 104.749226] ? locks_remove_file+0x78/0x2b0 [ 104.749248] ? __fsnotify_update_child_dentry_flags.part.0+0x170/0x170 [ 104.749281] ? vivid_req_validate+0x40/0x40 [vivid] [ 104.749321] ? v4l2_release.cold+0x6c/0xd6 [videodev] [ 104.749361] v4l2_release.cold+0x6c/0xd6 [videodev] [ 104.749378] __fput+0x15a/0x390 [ 104.749393] task_work_run+0xb2/0xe0 [ 104.749407] do_exit+0x4d0/0x1200 [ 104.749422] ? do_user_addr_fault+0x367/0x610 [ 104.749431] ? release_task+0x990/0x990 [ 104.749449] ? rwsem_spin_on_owner+0x170/0x170 [ 104.749463] ? vmacache_find+0xb2/0x100 [ 104.749476] do_group_exit+0x85/0x130 [ 104.749487] __x64_sys_exit_group+0x23/0x30 [ 104.749500] do_syscall_64+0x5e/0x1c0 [ 104.749511] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 104.749520] RIP: 0033:0x7f163fc5c9d6 [ 104.749536] Code: Bad RIP value. [ 104.749543] RSP: 002b:00007ffe6f3bec58 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 [ 104.749553] RAX: ffffffffffffffda RBX: 00007f163fd4d760 RCX: 00007f163fc5c9d6 [ 104.749560] RDX: 0000000000000000 RSI: 000000000000003c RDI: 0000000000000000 [ 104.749567] RBP: 0000000000000000 R08: 00000000000000e7 R09: ffffffffffffff80 [ 104.749574] R10: 00007ffe6f3beb24 R11: 0000000000000246 R12: 00007f163fd4d760 [ 104.749581] R13: 0000000000000002 R14: 00007f163fd56428 R15: 0000000000000000 [ 104.749597] ---[ end trace 66f20f73fc0daf79 ]--- This is caused by media_device_cleanup() which destroys v4l2_dev->mdev->req_queue_mutex. But v4l2_release() tries to lock that mutex after media_device_cleanup() is called. By moving media_device_cleanup() to the v4l2_device's release function it is guaranteed that the mutex is valid whenever v4l2_release is called. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: v4l2-core: fix touch support in v4l_g_fmtVandana BN1-15/+18
[ Upstream commit 545b618cfb5cadacd00c25066b9a36540e5ca9e9 ] v4l_s_fmt, for VFL_TYPE_TOUCH, sets unneeded members of the v4l2_pix_format structure to default values.This was missing in v4l_g_fmt, which would lead to failures in v4l2-compliance tests. Signed-off-by: Vandana BN <bnvandana@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: rcar_drif: fix a memory disclosureKangjie Lu1-0/+1
[ Upstream commit d39083234c60519724c6ed59509a2129fd2aed41 ] "f->fmt.sdr.reserved" is uninitialized. As other peer drivers like msi2500 and airspy do, the fix initializes it to avoid memory disclosures. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: smiapp: Register sensor after enabling runtime PM on the deviceSakari Ailus1-4/+8
[ Upstream commit 90c9e4a4dba9f4de331372e745fb1991c1faa598 ] Earlier it was possible that the parts of the driver that assumed runtime PM was enabled were being called before runtime PM was enabled in the driver's probe function. So enable runtime PM before registering the sub-device. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: aspeed: clear garbage interruptsJae Hyun Yoo1-0/+10
[ Upstream commit 65d270acb2d662c3346793663ac3a759eb4491b8 ] CAPTURE_COMPLETE and FRAME_COMPLETE interrupts come even when these are disabled in the VE_INTERRUPT_CTRL register and eventually this behavior causes disabling irq itself like below: [10055.108784] irq 23: nobody cared (try booting with the "irqpoll" option) [10055.115525] CPU: 0 PID: 331 Comm: swampd Tainted: G W 5.3.0-4fde000-dirty-d683e2e #1 [10055.124565] Hardware name: Generic DT based system [10055.129355] Backtrace: [10055.131854] [<80107d7c>] (dump_backtrace) from [<80107fb0>] (show_stack+0x20/0x24) [10055.139431] r7:00000017 r6:00000001 r5:00000000 r4:9d51dc00 [10055.145120] [<80107f90>] (show_stack) from [<8074bf50>] (dump_stack+0x20/0x28) [10055.152361] [<8074bf30>] (dump_stack) from [<80150ffc>] (__report_bad_irq+0x40/0xc0) [10055.160109] [<80150fbc>] (__report_bad_irq) from [<80150f2c>] (note_interrupt+0x23c/0x294) [10055.168374] r9:015b6e60 r8:00000000 r7:00000017 r6:00000001 r5:00000000 r4:9d51dc00 [10055.176136] [<80150cf0>] (note_interrupt) from [<8014df1c>] (handle_irq_event_percpu+0x88/0x98) [10055.184835] r10:7eff7910 r9:015b6e60 r8:00000000 r7:9d417600 r6:00000001 r5:00000002 [10055.192657] r4:9d51dc00 r3:00000000 [10055.196248] [<8014de94>] (handle_irq_event_percpu) from [<8014df64>] (handle_irq_event+0x38/0x4c) [10055.205113] r5:80b56d50 r4:9d51dc00 [10055.208697] [<8014df2c>] (handle_irq_event) from [<80151f1c>] (handle_level_irq+0xbc/0x12c) [10055.217037] r5:80b56d50 r4:9d51dc00 [10055.220623] [<80151e60>] (handle_level_irq) from [<8014d4b8>] (generic_handle_irq+0x30/0x44) [10055.229052] r5:80b56d50 r4:00000017 [10055.232648] [<8014d488>] (generic_handle_irq) from [<8014d524>] (__handle_domain_irq+0x58/0xb4) [10055.241356] [<8014d4cc>] (__handle_domain_irq) from [<801021e4>] (avic_handle_irq+0x68/0x70) [10055.249797] r9:015b6e60 r8:00c5387d r7:00c5387d r6:ffffffff r5:9dd33fb0 r4:9d402380 [10055.257539] [<8010217c>] (avic_handle_irq) from [<80101e34>] (__irq_usr+0x54/0x80) [10055.265105] Exception stack(0x9dd33fb0 to 0x9dd33ff8) [10055.270152] 3fa0: 015d0530 00000000 00000000 015d0538 [10055.278328] 3fc0: 015d0530 015b6e60 00000000 00000000 0052c5d0 015b6e60 7eff7910 7eff7918 [10055.286496] 3fe0: 76ce5614 7eff7908 0050e2f4 76a3a08c 20000010 ffffffff [10055.293104] r5:20000010 r4:76a3a08c [10055.296673] handlers: [10055.298967] [<79f218a5>] irq_default_primary_handler threaded [<1de88514>] aspeed_video_irq [10055.307344] Disabling IRQ #23 To fix this issue, this commit makes the interrupt handler clear these garbage interrupts. This driver enables and uses only COMP_COMPLETE interrupt instead for frame handling. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@intel.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: st-mipid02: add a check for devm_gpiod_get_optionalChuhong Yuan1-0/+5
[ Upstream commit 61c03b631b74a38ab53753f3ee971a55886d4843 ] mipid02_probe misses a check for devm_gpiod_get_optional and may miss the failure. Add a check to fix the problem. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: ov5640: Make 2592x1944 mode only available at 15 fpsBenoit Parrot1-0/+5
[ Upstream commit 981e445454531c9d5ac5d3fa8c0f1bd55262d001 ] The sensor data sheet clearly state that 2592x1944 only works at 15 fps make sure we don't try to miss configure the pll out of acceptable range. Signed-off-by: Benoit Parrot <bparrot@ti.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: ad5820: Define entity functionRicardo Ribalda Delgado1-0/+1
[ Upstream commit 801ef7c4919efba6b96b5aed1e72844ca69e26d3 ] Without this patch, media_device_register_entity throws a warning: dev_warn(mdev->dev, "Entity type for entity %s was not initialized!\n", entity->name); Signed-off-by: Ricardo Ribalda Delgado <ribalda@kernel.org> Acked-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: ov6650: Fix stored frame interval not in sync with hardwareJanusz Krzysztofik1-9/+12
[ Upstream commit 57822068dd120386b98891cb151dc20107b63ba7 ] The driver stores a frame interval value supposed to be in line with hardware state in a device private structure. Since the driver initial submission, the respective field of the structure has never been initialised on device probe. Moreover, if updated from .s_frame_interval(), a new value is stored before it is applied on hardware. If an error occurs during device update, the stored value may no longer reflect hardware state and consecutive calls to .g_frame_interval() may return incorrect information. Assuming a failed update of the device means its actual state hasn't changed, update the frame interval field of the device private structure with a new value only after it is successfully applied on hardware so it always reflects actual hardware state to the extent possible. Also, initialise the field with hardware default frame interval on device probe. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: aspeed: set hsync and vsync polarities to normal before starting mode ↵Jae Hyun Yoo1-0/+2
detection [ Upstream commit 5b3f3c41c5c791c1c22cd91655e7ef4b2a1dff7c ] Sometimes it detects a weird resolution such as 1024x287 when the actual resolution is 1024x768. To resolve such an issue, this commit adds clearing for hsync and vsync polarity register bits at the beginning of the first mode detection. This is recommended in the datasheet. Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: ti-vpe: vpe: fix a v4l2-compliance failure about invalid sizeimageBenoit Parrot2-0/+5
[ Upstream commit 0bac73adea4df8d34048b38f6ff24dc3e73e90b6 ] v4l2-compliance fails with this message: fail: v4l2-test-formats.cpp(463): !pfmt.sizeimage fail: v4l2-test-formats.cpp(736): \ Video Capture Multiplanar is valid, \ but TRY_FMT failed to return a format test VIDIOC_TRY_FMT: FAIL This failure is causd by the driver failing to handle out range 'bytesperline' values from user space applications. VPDMA hardware is limited to 64k line stride (16 bytes aligned, so 65520 bytes). So make sure the provided or calculated 'bytesperline' is smaller than the maximum value. Signed-off-by: Benoit Parrot <bparrot@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: ti-vpe: vpe: ensure buffers are cleaned up properly in abort casesBenoit Parrot1-3/+9
[ Upstream commit cf6acb73b050e98b5cc435fae0e8ae0157520410 ] v4l2-compliance fails with this message: fail: v4l2-test-buffers.cpp(691): ret == 0 fail: v4l2-test-buffers.cpp(974): captureBufs(node, q, m2m_q, frame_count, true) test MMAP: FAIL This caused the following Kernel Warning: WARNING: CPU: 0 PID: 961 at drivers/media/v4l2-core/videobuf2-core.c:1658 __vb2_queue_cancel+0x174/0x1d8 ... CPU: 0 PID: 961 Comm: v4l2-compliance Not tainted 4.14.62-01720-g20ecd717e87a #6 Hardware name: Generic DRA72X (Flattened Device Tree) Backtrace: [<c020b5bc>] (dump_backtrace) from [<c020b8a0>] (show_stack+0x18/0x1c) r7:00000009 r6:60070013 r5:00000000 r4:c1053824 [<c020b888>] (show_stack) from [<c09232e8>] (dump_stack+0x90/0xa4) [<c0923258>] (dump_stack) from [<c022b740>] (__warn+0xec/0x104) r7:00000009 r6:c0c0ad50 r5:00000000 r4:00000000 [<c022b654>] (__warn) from [<c022b810>] (warn_slowpath_null+0x28/0x30) r9:00000008 r8:00000000 r7:eced4808 r6:edbc9bac r5:eced4844 r4:eced4808 [<c022b7e8>] (warn_slowpath_null) from [<c0726f48>] (__vb2_queue_cancel+0x174/0x1d8) [<c0726dd4>] (__vb2_queue_cancel) from [<c0727648>] (vb2_core_queue_release+0x20/0x40) r10:ecc7bd70 r9:00000008 r8:00000000 r7:edb73010 r6:edbc9bac r5:eced4844 r4:eced4808 r3:00000004 [<c0727628>] (vb2_core_queue_release) from [<c0729528>] (vb2_queue_release+0x10/0x14) r5:edbc9810 r4:eced4800 [<c0729518>] (vb2_queue_release) from [<c0724d08>] (v4l2_m2m_ctx_release+0x1c/0x30) [<c0724cec>] (v4l2_m2m_ctx_release) from [<bf0e8f28>] (vpe_release+0x74/0xb0 [ti_vpe]) r5:edbc9810 r4:ed67a400 [<bf0e8eb4>] (vpe_release [ti_vpe]) from [<c070fccc>] (v4l2_release+0x3c/0x80) r7:edb73010 r6:ed176aa0 r5:edbc9868 r4:ed5119c0 [<c070fc90>] (v4l2_release) from [<c033cf1c>] (__fput+0x8c/0x1dc) r5:ecc7bd70 r4:ed5119c0 [<c033ce90>] (__fput) from [<c033d0cc>] (____fput+0x10/0x14) r10:00000000 r9:ed5119c0 r8:ece392d0 r7:c1059544 r6:ece38d80 r5:ece392b4 r4:00000000 [<c033d0bc>] (____fput) from [<c0246e00>] (task_work_run+0x98/0xb8) [<c0246d68>] (task_work_run) from [<c022f1d8>] (do_exit+0x170/0xa80) r9:ece351fc r8:00000000 r7:ecde3f58 r6:ffffe000 r5:ece351c0 r4:ece38d80 [<c022f068>] (do_exit) from [<c022fb6c>] (do_group_exit+0x48/0xc4) r7:000000f8 [<c022fb24>] (do_group_exit) from [<c022fc00>] (__wake_up_parent+0x0/0x28) r7:000000f8 r6:b6c6a798 r5:00000001 r4:00000001 [<c022fbe8>] (SyS_exit_group) from [<c0207c80>] (ret_fast_syscall+0x0/0x4c) These warnings are caused by buffers which not properly cleaned up/release during an abort use case. In the abort cases the VPDMA desc buffers would still be mapped and the in-flight VB2 buffers would not be released properly causing a kernel warning from being generated by the videobuf2-core level. Signed-off-by: Benoit Parrot <bparrot@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: ti-vpe: vpe: fix a v4l2-compliance failure causing a kernel panicBenoit Parrot1-1/+1
[ Upstream commit a37980ac5be29b83da67bf7d571c6bd9f90f8e45 ] v4l2-compliance fails with this message: warn: v4l2-test-formats.cpp(717): \ TRY_FMT cannot handle an invalid pixelformat. test VIDIOC_TRY_FMT: FAIL This causes the following kernel panic: Unable to handle kernel paging request at virtual address 56595561 pgd = ecd80e00 *pgd=00000000 Internal error: Oops: 205 [#1] PREEMPT SMP ARM ... CPU: 0 PID: 930 Comm: v4l2-compliance Not tainted \ 4.14.62-01715-gc8cd67f49a19 #1 Hardware name: Generic DRA72X (Flattened Device Tree) task: ece44d80 task.stack: ecc6e000 PC is at __vpe_try_fmt+0x18c/0x2a8 [ti_vpe] LR is at 0x8 Because the driver fails to properly check the 'num_planes' values for proper ranges it ends up accessing out of bound data causing the kernel panic. Since this driver only handle single or dual plane pixel format, make sure the provided value does not exceed 2 planes. Signed-off-by: Benoit Parrot <bparrot@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: ti-vpe: vpe: Make sure YUYV is set as default formatBenoit Parrot1-1/+1
[ Upstream commit e20b248051ca0f90d84b4d9378e4780bc31f16c6 ] v4l2-compliance fails with this message: fail: v4l2-test-formats.cpp(672): \ Video Capture Multiplanar: TRY_FMT(G_FMT) != G_FMT fail: v4l2-test-formats.cpp(672): \ Video Output Multiplanar: TRY_FMT(G_FMT) != G_FMT ... test VIDIOC_TRY_FMT: FAIL The default pixel format was setup as pointing to a specific offset in the vpe_formats table assuming it was pointing to the V4L2_PIX_FMT_YUYV entry. This became false after the addition on the NV21 format (see above commid-id) So instead of hard-coding an offset which might change over time we need to use a lookup helper instead so we know the default will always be what we intended. Signed-off-by: Benoit Parrot <bparrot@ti.com> Fixes: 40cc823f7005 ("media: ti-vpe: Add support for NV21 format") Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: ti-vpe: vpe: fix a v4l2-compliance failure about frame sequence numberBenoit Parrot1-0/+1
[ Upstream commit 2444846c0dbfa4ead21b621e4300ec32c90fbf38 ] v4l2-compliance fails with this message: fail: v4l2-test-buffers.cpp(294): \ (int)g_sequence() < seq.last_seq + 1 fail: v4l2-test-buffers.cpp(740): \ buf.check(m2m_q, last_m2m_seq) fail: v4l2-test-buffers.cpp(974): \ captureBufs(node, q, m2m_q, frame_count, true) test MMAP: FAIL The driver is failing to update the source frame sequence number in the vb2 buffer object. Only the destination frame sequence was being updated. This is only a reporting issue if the user space app actually cares about the frame sequence number. But it is fixed nonetheless. Signed-off-by: Benoit Parrot <bparrot@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: ti-vpe: vpe: fix a v4l2-compliance warning about invalid pixel formatBenoit Parrot1-4/+9
[ Upstream commit 06bec72b250b2cb3ba96fa45c2b8e0fb83745517 ] v4l2-compliance warns with this message: warn: v4l2-test-formats.cpp(717): \ TRY_FMT cannot handle an invalid pixelformat. warn: v4l2-test-formats.cpp(718): \ This may or may not be a problem. For more information see: warn: v4l2-test-formats.cpp(719): \ http://www.mail-archive.com/linux-media@vger.kernel.org/msg56550.html ... test VIDIOC_TRY_FMT: FAIL We need to make sure that the returns a valid pixel format in all instance. Based on the v4l2 framework convention drivers must return a valid pixel format when the requested pixel format is either invalid or not supported. Signed-off-by: Benoit Parrot <bparrot@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: ti-vpe: vpe: Fix Motion Vector vpdma strideBenoit Parrot1-5/+13
[ Upstream commit 102af9b9922f658f705a4b0deaccabac409131bf ] commit 3dc2046ca78b ("[media] media: ti-vpe: vpe: allow use of user specified stride") and commit da4414eaed15 ("[media] media: ti-vpe: vpdma: add support for user specified stride") resulted in the Motion Vector stride to be the same as the image stride. This caused memory corruption in the output image as mentioned in commit 00db969964c8 ("[media] media: ti-vpe: vpe: Fix line stride for output motion vector"). Fixes: 3dc2046ca78b ("[media] media: ti-vpe: vpe: allow use of user specified stride") Fixes: da4414eaed15 ("[media] media: ti-vpe: vpdma: add support for user specified stride") Signed-off-by: Benoit Parrot <bparrot@ti.com> Acked-by: Nikhil Devshatwar <nikhil.nd@ti.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: cx88: Fix some error handling path in 'cx8800_initdev()'Christophe JAILLET1-4/+7
[ Upstream commit e1444e9b0424c70def6352580762d660af50e03f ] A call to 'pci_disable_device()' is missing in the error handling path. In some cases, a call to 'free_irq()' may also be missing. Reorder the error handling path, add some new labels and fix the 2 issues mentionned above. This way, the error handling path in more in line with 'cx8800_finidev()' (i.e. the remove function) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: meson/ao-cec: move cec_notifier_cec_adap_register after hw setupNeil Armstrong2-33/+33
[ Upstream commit 3e84a18a259e1df35e5b549ab92ec3baf82ff010 ] When probed after the HDMI notifier, calling cec_notifier_cec_adap_register() calls the enable() adapter callback, but the HW is not yet set up. Moving cec_notifier_cec_adap_register() right before cec_register_adapter() fixes the following crash: Ignoring spurious kernel translation fault at virtual address 0000000000000008 [...] Hardware name: Khadas VIM (DT) [...] pc : __do_kernel_fault+0xdc/0x120 lr : __do_kernel_fault+0xdc/0x120 [...] Call trace: __do_kernel_fault+0xdc/0x120 do_page_fault+0x180/0x458 do_translation_fault+0x64/0x70 do_mem_abort+0x3c/0x98 el1_da+0x20/0x94 meson_ao_cec_adap_enable+0x30/0x218 [ao_cec] __cec_s_phys_addr+0x184/0x270 cec_s_phys_addr+0x44/0x60 cec_notifier_cec_adap_register+0x68/0x90 meson_ao_cec_probe+0xb0/0x288 [ao_cec] [...] el0_svc_compat+0x8/0x10 Reported-by: Christian Hewitt <christianshewitt@gmail.com> Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: 20958f9d5c48 ("media: meson/ao-cec: use cec_notifier_cec_adap_(un)register") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: flexcop-usb: fix NULL-ptr deref in flexcop_usb_transfer_init()Yang Yingliang1-1/+7
[ Upstream commit 649cd16c438f51d4cd777e71ca1f47f6e0c5e65d ] If usb_set_interface() failed, iface->cur_altsetting will not be assigned and it will be used in flexcop_usb_transfer_init() It may lead a NULL pointer dereference. Check usb_set_interface() return value in flexcop_usb_init() and return failed to avoid using this NULL pointer. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: venus: Fix occasionally failures to suspendStanimir Varbanov1-0/+6
[ Upstream commit 8dbebb2bd01e6f36e9a215dcde99ace70408f2c8 ] Failure to suspend (venus_suspend_3xx) happens when the system is fresh booted and loading venus driver. This happens once and after reload the venus driver modules the problem disrepair. Fix the failure by skipping the check for WFI and IDLE bits if PC_READY is on in control status register. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: vimc: Fix gpf in rmmod path when stream is activeShuah Khan4-2/+4
[ Upstream commit d7fb5c361c2a2666d20e044206e1756bc8e87df2 ] If vimc module is removed while streaming is in progress, sensor subdev unregister runs into general protection fault when it tries to unregister media entities. This is a common subdev problem related to releasing pads from v4l2_device_unregister_subdev() before calling unregister. Unregister references pads during unregistering subdev. The sd release handler is the right place for releasing all sd resources including pads. The release handlers currently release all resources except the pads. Fix v4l2_device_unregister_subdev() not release pads and release pads from the sd_int_op release handlers. kernel: [ 4136.715839] general protection fault: 0000 [#1] SMP PTI kernel: [ 4136.715847] CPU: 2 PID: 1972 Comm: bash Not tainted 5.3.0-rc2+ #4 kernel: [ 4136.715850] Hardware name: Dell Inc. OptiPlex 790/0HY9JP, BIOS A18 09/24/2013 kernel: [ 4136.715858] RIP: 0010:media_gobj_destroy.part.16+0x1f/0x60 kernel: [ 4136.715863] Code: ff 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48 89 fe 48 89 e5 53 48 89 fb 48 c7 c7 00 7f cf b0 e8 24 fa ff ff 48 8b 03 <48> 83 80 a0 00 00 00 01 48 8b 43 18 48 8b 53 10 48 89 42 08 48 89 kernel: [ 4136.715866] RSP: 0018:ffff9b2248fe3cb0 EFLAGS: 00010246 kernel: [ 4136.715870] RAX: bcf2bfbfa0d63c2f RBX: ffff88c3eb37e9c0 RCX: 00000000802a0018 kernel: [ 4136.715873] RDX: ffff88c3e4f6a078 RSI: ffff88c3eb37e9c0 RDI: ffffffffb0cf7f00 kernel: [ 4136.715876] RBP: ffff9b2248fe3cb8 R08: 0000000001000002 R09: ffffffffb0492b00 kernel: [ 4136.715879] R10: ffff9b2248fe3c28 R11: 0000000000000001 R12: 0000000000000038 kernel: [ 4136.715881] R13: ffffffffc09a1628 R14: ffff88c3e4f6a028 R15: fffffffffffffff2 kernel: [ 4136.715885] FS: 00007f8389647740(0000) GS:ffff88c465500000(0000) knlGS:0000000000000000 kernel: [ 4136.715888] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: [ 4136.715891] CR2: 000055d008f80fd8 CR3: 00000001996ec005 CR4: 00000000000606e0 kernel: [ 4136.715894] Call Trace: kernel: [ 4136.715903] media_gobj_destroy+0x14/0x20 kernel: [ 4136.715908] __media_device_unregister_entity+0xb3/0xe0 kernel: [ 4136.715915] media_device_unregister_entity+0x30/0x40 kernel: [ 4136.715920] v4l2_device_unregister_subdev+0xa8/0xe0 kernel: [ 4136.715928] vimc_ent_sd_unregister+0x1e/0x30 [vimc] kernel: [ 4136.715933] vimc_sen_rm+0x16/0x20 [vimc] kernel: [ 4136.715938] vimc_remove+0x3e/0xa0 [vimc] kernel: [ 4136.715945] platform_drv_remove+0x25/0x50 kernel: [ 4136.715951] device_release_driver_internal+0xe0/0x1b0 kernel: [ 4136.715956] device_driver_detach+0x14/0x20 kernel: [ 4136.715960] unbind_store+0xd1/0x130 kernel: [ 4136.715965] drv_attr_store+0x27/0x40 kernel: [ 4136.715971] sysfs_kf_write+0x48/0x60 kernel: [ 4136.715976] kernfs_fop_write+0x128/0x1b0 kernel: [ 4136.715982] __vfs_write+0x1b/0x40 kernel: [ 4136.715987] vfs_write+0xc3/0x1d0 kernel: [ 4136.715993] ksys_write+0xaa/0xe0 kernel: [ 4136.715999] __x64_sys_write+0x1a/0x20 kernel: [ 4136.716005] do_syscall_64+0x5a/0x130 kernel: [ 4136.716010] entry_SYSCALL_64_after_hwframe+0x4 Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: venus: core: Fix msm8996 frequency tableLoic Poulain1-4/+5
[ Upstream commit c690435ed07901737e5c007a65ec59f53b33eb71 ] In downstream driver, there are two frequency tables defined, one for the encoder and one for the decoder: /* Encoders / <972000 490000000 0x55555555>, / 4k UHD @ 30 / <489600 320000000 0x55555555>, / 1080p @ 60 / <244800 150000000 0x55555555>, / 1080p @ 30 / <108000 75000000 0x55555555>, / 720p @ 30 */ /* Decoders / <1944000 490000000 0xffffffff>, / 4k UHD @ 60 / < 972000 320000000 0xffffffff>, / 4k UHD @ 30 / < 489600 150000000 0xffffffff>, / 1080p @ 60 / < 244800 75000000 0xffffffff>; / 1080p @ 30 */ It shows that encoder always needs a higher clock than decoder. In current venus driver, the unified frequency table is aligned with the downstream decoder table which causes performance issues in encoding scenarios. Fix that by aligning frequency table on worst case (encoding). Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: ov6650: Fix stored crop rectangle not in sync with hardwareJanusz Krzysztofik1-0/+2
[ Upstream commit 1463b371aff0682c70141f7521db13cc4bbf3016 ] The driver stores crop rectangle settings supposed to be in line with hardware state in a device private structure. Since the driver initial submission, crop rectangle width and height settings are not updated correctly when rectangle offset settings are applied on hardware. If an error occurs while the device is updated, the stored settings my no longer reflect hardware state and consecutive calls to .get_selection() as well as .get/set_fmt() may return incorrect information. That in turn may affect ability of a bridge device to use correct DMA transfer settings if such incorrect informamtion on active frame format returned by .get/set_fmt() is used. Assuming a failed update of the device means its actual settings haven't changed, update crop rectangle width and height settings stored in the device private structure correctly while the rectangle offset is successfully applied on hardware so the stored values always reflect actual hardware state to the extent possible. Fixes: 2f6e2404799a ("[media] SoC Camera: add driver for OV6650 sensor") Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: ov6650: Fix stored frame format not in sync with hardwareJanusz Krzysztofik1-3/+6
[ Upstream commit 3143b459de4cdcce67b36827476c966e93c1cf01 ] The driver stores frame format settings supposed to be in line with hardware state in a device private structure. Since the driver initial submission, those settings are updated before they are actually applied on hardware. If an error occurs on device update, the stored settings my not reflect hardware state anymore and consecutive calls to .get_fmt() may return incorrect information. That in turn may affect ability of a bridge device to use correct DMA transfer settings if such incorrect informmation on active frame format returned by .get_fmt() is used. Assuming a failed device update means its state hasn't changed, update frame format related settings stored in the device private structure only after they are successfully applied so the stored values always reflect hardware state as closely as possible. Fixes: 2f6e2404799a ("[media] SoC Camera: add driver for OV6650 sensor") Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: i2c: ov2659: Fix missing 720p register configBenoit Parrot1-0/+4
[ Upstream commit 9d669fbfca20e6035ead814e55d9ef1a6b500540 ] The initial registers sequence is only loaded at probe time. Afterward only the resolution and format specific register are modified. Care must be taken to make sure registers modified by one resolution setting are reverted back when another resolution is programmed. This was not done properly for the 720p case. Signed-off-by: Benoit Parrot <bparrot@ti.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: ov6650: Fix crop rectangle alignment not passed backJanusz Krzysztofik1-16/+15
[ Upstream commit 7b188d6ba27a131e7934a51a14ece331c0491f18 ] Commit 4f996594ceaf ("[media] v4l2: make vidioc_s_crop const") introduced a writable copy of constified user requested crop rectangle in order to be able to perform hardware alignments on it. Later on, commit 10d5509c8d50 ("[media] v4l2: remove g/s_crop from video ops") replaced s_crop() video operation using that const argument with set_selection() pad operation which had a corresponding argument not constified, however the original behavior of the driver was not restored. Since that time, any hardware alignment applied on a user requested crop rectangle is not passed back to the user calling .set_selection() as it should be. Fix the issue by dropping the copy and replacing all references to it with references to the crop rectangle embedded in the user argument. Fixes: 10d5509c8d50 ("[media] v4l2: remove g/s_crop from video ops") Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: i2c: ov2659: fix s_stream return valueBenoit Parrot1-5/+9
[ Upstream commit 85c4043f1d403c222d481dfc91846227d66663fb ] In ov2659_s_stream() return value for invoked function should be checked and propagated. Signed-off-by: Benoit Parrot <bparrot@ti.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: ov6650: Fix control handler not freed on init errorJanusz Krzysztofik1-4/+8
[ Upstream commit c404af950d14b71bfbf574a752b6c29d726baaba ] Since commit afd9690c72c3 ("[media] ov6650: convert to the control framework"), if an error occurs during initialization of a control handler, resources possibly allocated to the handler are not freed before device initialiaton is aborted. Fix it. Fixes: afd9690c72c3 ("[media] ov6650: convert to the control framework") Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: max2175: Fix build error without CONFIG_REGMAP_I2CYueHaibing1-0/+1
[ Upstream commit 36756fbff1e4a31d71d262ae6a04a20b38efa874 ] If CONFIG_REGMAP_I2C is not set, building fails: drivers/media/i2c/max2175.o: In function `max2175_probe': max2175.c:(.text+0x1404): undefined reference to `__devm_regmap_init_i2c' Select REGMAP_I2C to fix this. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: b47b79d8a231 ("[media] media: i2c: max2175: Add MAX2175 support") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: vim2m: Fix BUG_ON in vim2m_device_release()Kefeng Wang1-0/+1
[ Upstream commit 2455d417c03aa0cbafed04c46cbb354643238318 ] If v4l2_m2m_init() fails, m2m_dev pointer will be set ERR_PTR(-ENOMEM), then kfree m2m_dev will trigger BUG_ON, see below, fix it by setting m2m_dev to NULL. vim2m vim2m.0: Failed to init mem2mem device ------------[ cut here ]------------ kernel BUG at mm/slub.c:3944! invalid opcode: 0000 [#1] SMP PTI CPU: 11 PID: 9061 Comm: insmod Tainted: G E 5.2.0-rc2 #81 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:kfree+0x11a/0x160 Call Trace: vim2m_device_release+0x3f/0x50 [vim2m] device_release+0x27/0x80 kobject_release+0x68/0x190 vim2m_probe+0x20f/0x280 [vim2m] platform_drv_probe+0x37/0x90 really_probe+0xef/0x3d0 driver_probe_device+0x110/0x120 device_driver_attach+0x4f/0x60 __driver_attach+0x9a/0x140 ? device_driver_attach+0x60/0x60 bus_for_each_dev+0x76/0xc0 ? klist_add_tail+0x57/0x70 bus_add_driver+0x141/0x210 driver_register+0x5b/0xe0 vim2m_init+0x29/0x1000 [vim2m] do_one_initcall+0x46/0x1f4 ? __slab_alloc+0x1c/0x30 ? kmem_cache_alloc_trace+0x167/0x1b0 do_init_module+0x5b/0x21f load_module+0x1add/0x1fb0 ? __do_sys_finit_module+0xe9/0x110 __do_sys_finit_module+0xe9/0x110 do_syscall_64+0x5b/0x1c0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: ea6c7e34f3b2 ("media: vim2m: replace devm_kzalloc by kzalloc") Reported-by: Hulk Robot <hulkci@huawei.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: vim2m: Fix abort issueJernej Skrabec1-0/+3
[ Upstream commit c362f77a243bfd1daec21b6c36491c061ee2f31b ] Currently, if start streaming -> stop streaming -> start streaming sequence is executed, driver will end job prematurely, if ctx->translen is higher than 1, because "aborting" flag is still set from previous stop streaming command. Fix that by clearing "aborting" flag in start streaming handler. Fixes: 96d8eab5d0a1 ("V4L/DVB: [v5,2/2] v4l: Add a mem-to-mem videobuf framework test device") Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: seco-cec: Add a missing 'release_region()' in an error handling pathChristophe JAILLET1-0/+1
[ Upstream commit a9cc4cbcdfd378b65fd4e398800cfa14e3855042 ] At the beginning of the probe function, we have a call to 'request_muxed_region(BRA_SMB_BASE_ADDR, 7, "CEC00001")()' A corresponding 'release_region()' is performed in the remove function but is lacking in the error handling path. Add it. Fixes: b03c2fb97adc ("media: add SECO cec driver") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-31media: am437x-vpfe: Setting STD to current value is not an errorBenoit Parrot1-0/+4
[ Upstream commit 13aa21cfe92ce9ebb51824029d89f19c33f81419 ] VIDIOC_S_STD should not return an error if the value is identical to the current one. This error was highlighted by the v4l2-compliance test. Signed-off-by: Benoit Parrot <bparrot@ti.com> Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-17media: radio: wl1273: fix interrupt masking on releaseJohan Hovold1-2/+1
commit 1091eb830627625dcf79958d99353c2391f41708 upstream. If a process is interrupted while accessing the radio device and the core lock is contended, release() could return early and fail to update the interrupt mask. Note that the return value of the v4l2 release file operation is ignored. Fixes: 87d1a50ce451 ("[media] V4L2: WL1273 FM Radio: TI WL1273 FM radio driver") Cc: stable <stable@vger.kernel.org> # 2.6.38 Cc: Matti Aaltonen <matti.j.aaltonen@nokia.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17media: bdisp: fix memleak on releaseJohan Hovold1-2/+1
commit 11609a7e21f8cea42630350aa57662928fa4dc63 upstream. If a process is interrupted while accessing the video device and the device lock is contended, release() could return early and fail to free related resources. Note that the return value of the v4l2 release file operation is ignored. Fixes: 28ffeebbb7bd ("[media] bdisp: 2D blitter driver using v4l2 mem2mem framework") Cc: stable <stable@vger.kernel.org> # 4.2 Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17media: vimc: sen: remove unused kthread_sen fieldDafna Hirschfeld1-5/+0
commit 3ea35d5db448c27807acbcc7a2306cf65c5e6397 upstream. The field kthread_sen in the vimc_sen_device is not set and used. So remove the field and the code that check if it is non NULL Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Cc: <stable@vger.kernel.org> # for v5.4 and up Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-17media: venus: remove invalid compat_ioctl32 handlerArnd Bergmann2-6/+0
commit 4adc0423de92cf850d1ef5c0e7cb28fd7a38219e upstream. v4l2_compat_ioctl32() is the function that calls into v4l2_file_operations->compat_ioctl32(), so setting that back to the same function leads to a trivial endless loop, followed by a kernel stack overrun. Remove the incorrect assignment. Cc: stable@vger.kernel.org Fixes: 7472c1c69138 ("[media] media: venus: vdec: add video decoder files") Fixes: aaaa93eda64b ("[media] media: venus: venc: add video encoder files") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-14 01:19:36 +0300