summaryrefslogtreecommitdiff
path: root/drivers/media
AgeCommit message (Collapse)AuthorFilesLines
2018-05-25media: dmxdev: fix error code for invalid ioctlsMauro Carvalho Chehab1-1/+1
[ Upstream commit a145f64c6107d3aa5a7cec9f8977d04ac2a896c9 ] Returning -EINVAL when an ioctl is not implemented is a very bad idea, as it is hard to distinguish from other error contitions that an ioctl could lead. Replace it by its right error code: -ENOTTY. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-25media: cx23885: Set subdev host data to clk_freq pointerBrad Love1-0/+4
[ Upstream commit 5ceade1d97fc6687e050c44c257382c192f56276 ] Currently clk_freq is ignored entirely, because the cx235840 driver configures the xtal at the chip defaults. This is an issue if a board is produced with a non-default frequency crystal. If clk_freq is not zero the cx25840 will attempt to use the setting provided, or fall back to defaults otherwise. Signed-off-by: Brad Love <brad@nextdimension.cc> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-25media: em28xx: USB bulk packet size fixBrad Love1-1/+1
[ Upstream commit c7c7e8d7803406daa21e96d00c357de8b77b6764 ] Hauppauge em28xx bulk devices exhibit continuity errors and corrupted packets, when run in VMWare virtual machines. Unknown if other manufacturers bulk models exhibit the same issue. KVM/Qemu is unaffected. According to documentation the maximum packet multiplier for em28xx in bulk transfer mode is 256 * 188 bytes. This changes the size of bulk transfers to maximum supported value and have a bonus beneficial alignment. Before: After: This sets up USB to expect just as many bytes as the em28xx is set to emit. Successful usage under load afterwards natively and in both VMWare and KVM/Qemu virtual machines. Signed-off-by: Brad Love <brad@nextdimension.cc> Reviewed-by: Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-29stk-webcam: fix an endian bug in stk_camera_read_reg()Dan Carpenter3-9/+10
commit d08876f524a605d64c7ca32cb8e9f5be3839e82e upstream. We pass an int pointer to stk_camera_read_reg() but only write to the highest byte. It's a bug on big endian systems and generally a nasty thing to do and doesn't match the write function either. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-20media: v4l2-compat-ioctl32: don't oops on overlayMauro Carvalho Chehab1-1/+3
commit 85ea29f19eab56ec16ec6b92bc67305998706afa upstream. At put_v4l2_window32(), it tries to access kp->clips. However, kp points to an userspace pointer. So, it should be obtained via get_user(), otherwise it can OOPS: vivid-000: ================== END STATUS ================== BUG: unable to handle kernel paging request at 00000000fffb18e0 IP: [<ffffffffc05468d9>] __put_v4l2_format32+0x169/0x220 [videodev] PGD 3f5776067 PUD 3f576f067 PMD 3f5769067 PTE 800000042548f067 Oops: 0001 [#1] SMP Modules linked in: vivid videobuf2_vmalloc videobuf2_memops v4l2_dv_timings videobuf2_core v4l2_common videodev media xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables bluetooth rfkill binfmt_misc snd_hda_codec_hdmi i915 snd_hda_intel snd_hda_controller snd_hda_codec intel_rapl x86_pkg_temp_thermal snd_hwdep intel_powerclamp snd_pcm coretemp snd_seq_midi kvm_intel kvm snd_seq_midi_event snd_rawmidi i2c_algo_bit drm_kms_helper snd_seq drm crct10dif_pclmul e1000e snd_seq_device crc32_pclmul snd_timer ghash_clmulni_intel snd mei_me mei ptp pps_core soundcore lpc_ich video crc32c_intel [last unloaded: media] CPU: 2 PID: 28332 Comm: v4l2-compliance Not tainted 3.18.102+ #107 Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017 task: ffff8804293f8000 ti: ffff8803f5640000 task.ti: ffff8803f5640000 RIP: 0010:[<ffffffffc05468d9>] [<ffffffffc05468d9>] __put_v4l2_format32+0x169/0x220 [videodev] RSP: 0018:ffff8803f5643e28 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00000000fffb1ab4 RDX: 00000000fffb1a68 RSI: 00000000fffb18d8 RDI: 00000000fffb1aa8 RBP: ffff8803f5643e48 R08: 0000000000000001 R09: ffff8803f54b0378 R10: 0000000000000000 R11: 0000000000000168 R12: 00000000fffb18c0 R13: 00000000fffb1a94 R14: 00000000fffb18c8 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff880456d00000(0063) knlGS:00000000f7100980 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 00000000fffb18e0 CR3: 00000003f552b000 CR4: 00000000003407e0 Stack: 00000000fffb1a94 00000000c0cc5640 0000000000000056 ffff8804274f3600 ffff8803f5643ed0 ffffffffc0547e16 0000000000000003 ffff8803f5643eb0 ffffffff81301460 ffff88009db44b01 ffff880441942520 ffff8800c0d05640 Call Trace: [<ffffffffc0547e16>] v4l2_compat_ioctl32+0x12d6/0x1b1d [videodev] [<ffffffff81301460>] ? file_has_perm+0x70/0xc0 [<ffffffff81252a2c>] compat_SyS_ioctl+0xec/0x1200 [<ffffffff8173241a>] sysenter_dispatch+0x7/0x21 Code: 00 00 48 8b 80 48 c0 ff ff 48 83 e8 38 49 39 c6 0f 87 2b ff ff ff 49 8d 45 1c e8 a3 ce e3 c0 85 c0 0f 85 1a ff ff ff 41 8d 40 ff <4d> 8b 64 24 20 41 89 d5 48 8d 44 40 03 4d 8d 34 c4 eb 15 0f 1f RIP [<ffffffffc05468d9>] __put_v4l2_format32+0x169/0x220 [videodev] RSP <ffff8803f5643e28> CR2: 00000000fffb18e0 Tested with vivid driver on Kernel v3.18.102. Same bug happens upstream too: BUG: KASAN: user-memory-access in __put_v4l2_format32+0x98/0x4d0 [videodev] Read of size 8 at addr 00000000ffe48400 by task v4l2-compliance/8713 CPU: 0 PID: 8713 Comm: v4l2-compliance Not tainted 4.16.0-rc4+ #108 Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017 Call Trace: dump_stack+0x5c/0x7c kasan_report+0x164/0x380 ? __put_v4l2_format32+0x98/0x4d0 [videodev] __put_v4l2_format32+0x98/0x4d0 [videodev] v4l2_compat_ioctl32+0x1aec/0x27a0 [videodev] ? __fsnotify_inode_delete+0x20/0x20 ? __put_v4l2_format32+0x4d0/0x4d0 [videodev] compat_SyS_ioctl+0x646/0x14d0 ? do_ioctl+0x30/0x30 do_fast_syscall_32+0x191/0x3f4 entry_SYSENTER_compat+0x6b/0x7a ================================================================== Disabling lock debugging due to kernel taint BUG: unable to handle kernel paging request at 00000000ffe48400 IP: __put_v4l2_format32+0x98/0x4d0 [videodev] PGD 3a22fb067 P4D 3a22fb067 PUD 39b6f0067 PMD 39b6f1067 PTE 80000003256af067 Oops: 0001 [#1] SMP KASAN Modules linked in: vivid videobuf2_vmalloc videobuf2_dma_contig videobuf2_memops v4l2_tpg v4l2_dv_timings videobuf2_v4l2 videobuf2_common v4l2_common videodev xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack libcrc32c tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables bluetooth rfkill ecdh_generic binfmt_misc snd_hda_codec_hdmi intel_rapl x86_pkg_temp_thermal intel_powerclamp i915 coretemp snd_hda_intel snd_hda_codec kvm_intel snd_hwdep snd_hda_core kvm snd_pcm irqbypass crct10dif_pclmul crc32_pclmul snd_seq_midi ghash_clmulni_intel snd_seq_midi_event i2c_algo_bit intel_cstate snd_rawmidi intel_uncore snd_seq drm_kms_helper e1000e snd_seq_device snd_timer intel_rapl_perf drm ptp snd mei_me mei lpc_ich pps_core soundcore video crc32c_intel CPU: 0 PID: 8713 Comm: v4l2-compliance Tainted: G B 4.16.0-rc4+ #108 Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017 RIP: 0010:__put_v4l2_format32+0x98/0x4d0 [videodev] RSP: 0018:ffff8803b9be7d30 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8803ac983e80 RCX: ffffffff8cd929f2 RDX: 1ffffffff1d0a149 RSI: 0000000000000297 RDI: 0000000000000297 RBP: 00000000ffe485c0 R08: fffffbfff1cf5123 R09: ffffffff8e7a8948 R10: 0000000000000001 R11: fffffbfff1cf5122 R12: 00000000ffe483e0 R13: 00000000ffe485c4 R14: ffff8803ac985918 R15: 00000000ffe483e8 FS: 0000000000000000(0000) GS:ffff880407400000(0063) knlGS:00000000f7a46980 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 00000000ffe48400 CR3: 00000003a83f2003 CR4: 00000000003606f0 Call Trace: v4l2_compat_ioctl32+0x1aec/0x27a0 [videodev] ? __fsnotify_inode_delete+0x20/0x20 ? __put_v4l2_format32+0x4d0/0x4d0 [videodev] compat_SyS_ioctl+0x646/0x14d0 ? do_ioctl+0x30/0x30 do_fast_syscall_32+0x191/0x3f4 entry_SYSENTER_compat+0x6b/0x7a Code: 4c 89 f7 4d 8d 7c 24 08 e8 e6 a4 69 cb 48 8b 83 98 1a 00 00 48 83 e8 10 49 39 c7 0f 87 9d 01 00 00 49 8d 7c 24 20 e8 c8 a4 69 cb <4d> 8b 74 24 20 4c 89 ef 4c 89 fe ba 10 00 00 00 e8 23 d9 08 cc RIP: __put_v4l2_format32+0x98/0x4d0 [videodev] RSP: ffff8803b9be7d30 CR2: 00000000ffe48400 cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13mceusb: sporadic RX truncation corruption fixA Sun1-2/+7
[ Upstream commit 8e175b22e8640bf3a58e071af54190b909e4a944 ] Intermittent RX truncation and loss of IR received data. This resulted in receive stream synchronization errors where driver attempted to incorrectly parse IR data (eg 0x90 below) as command response. [ 3969.139898] mceusb 1-1.2:1.0: processed IR data [ 3969.151315] mceusb 1-1.2:1.0: rx data: 00 90 (length=2) [ 3969.151321] mceusb 1-1.2:1.0: Unknown command 0x00 0x90 [ 3969.151336] mceusb 1-1.2:1.0: rx data: 98 0a 8d 0a 8e 0a 8e 0a 8e 0a 8e 0a 9a 0a 8e 0a 0b 3a 8e 00 80 41 59 00 00 (length=25) [ 3969.151341] mceusb 1-1.2:1.0: Raw IR data, 24 pulse/space samples [ 3969.151348] mceusb 1-1.2:1.0: Storing space with duration 500000 Bug trigger appears to be normal, but heavy, IR receiver use. Signed-off-by: A Sun <as1033x@comcast.net> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13cx25840: fix unchecked return valuesPan Bian1-15/+21
[ Upstream commit 35378ce143071c2a6bad4b59a000e9b9f8f6ea67 ] In functions cx25840_initialize(), cx231xx_initialize(), and cx23885_initialize(), the return value of create_singlethread_workqueue() is used without validation. This may result in NULL dereference and cause kernel crash. This patch fixes it. Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13media: videobuf2-core: don't go out of the buffer rangeMauro Carvalho Chehab1-0/+4
[ Upstream commit df93dc61b0d8b19a5c9db545cf3fcc24f88dfde4 ] Currently, there's no check if an invalid buffer range is passed. However, while testing DVB memory mapped apps, I got this: videobuf2_core: VB: num_buffers -2143943680, buffer 33, index -2143943647 unable to handle kernel paging request at ffff888b773c0890 IP: __vb2_queue_alloc+0x134/0x4e0 [videobuf2_core] PGD 4142c7067 P4D 4142c7067 PUD 0 Oops: 0002 [#1] SMP Modules linked in: xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables bluetooth rfkill ecdh_generic binfmt_misc rc_dvbsky sp2 ts2020 intel_rapl x86_pkg_temp_thermal dvb_usb_dvbsky intel_powerclamp dvb_usb_v2 coretemp m88ds3103 kvm_intel i2c_mux dvb_core snd_hda_codec_hdmi crct10dif_pclmul crc32_pclmul videobuf2_vmalloc videobuf2_memops snd_hda_intel ghash_clmulni_intel videobuf2_core snd_hda_codec rc_core mei_me intel_cstate snd_hwdep snd_hda_core videodev intel_uncore snd_pcm mei media tpm_tis tpm_tis_core intel_rapl_perf tpm snd_timer lpc_ich snd soundcore kvm irqbypass libcrc32c i915 i2c_algo_bit drm_kms_helper e1000e ptp drm crc32c_intel video pps_core CPU: 3 PID: 1776 Comm: dvbv5-zap Not tainted 4.14.0+ #78 Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0364.2017.0511.0949 05/11/2017 task: ffff88877c73bc80 task.stack: ffffb7c402418000 RIP: 0010:__vb2_queue_alloc+0x134/0x4e0 [videobuf2_core] RSP: 0018:ffffb7c40241bc60 EFLAGS: 00010246 RAX: 0000000080360421 RBX: 0000000000000021 RCX: 000000000000000a RDX: ffffb7c40241bcf4 RSI: ffff888780362c60 RDI: ffff888796d8e130 RBP: ffffb7c40241bcc8 R08: 0000000000000316 R09: 0000000000000004 R10: ffff888780362c00 R11: 0000000000000001 R12: 000000000002f000 R13: ffff8887758be700 R14: 0000000000021000 R15: 0000000000000001 FS: 00007f2849024740(0000) GS:ffff888796d80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff888b773c0890 CR3: 000000043beb2005 CR4: 00000000003606e0 Call Trace: vb2_core_reqbufs+0x226/0x420 [videobuf2_core] dvb_vb2_reqbufs+0x2d/0xc0 [dvb_core] dvb_dvr_do_ioctl+0x98/0x1d0 [dvb_core] dvb_usercopy+0x53/0x1b0 [dvb_core] ? dvb_demux_ioctl+0x20/0x20 [dvb_core] ? tty_ldisc_deref+0x16/0x20 ? tty_write+0x1f9/0x310 ? process_echoes+0x70/0x70 dvb_dvr_ioctl+0x15/0x20 [dvb_core] do_vfs_ioctl+0xa5/0x600 SyS_ioctl+0x79/0x90 entry_SYSCALL_64_fastpath+0x1a/0xa5 RIP: 0033:0x7f28486f7ea7 RSP: 002b:00007ffc13b2db18 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 000055b10fc06130 RCX: 00007f28486f7ea7 RDX: 00007ffc13b2db48 RSI: 00000000c0086f3c RDI: 0000000000000007 RBP: 0000000000000203 R08: 000055b10df1e02c R09: 000000000000002e R10: 0036b42415108357 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f2849062f60 R14: 00000000000001f1 R15: 00007ffc13b2da54 Code: 74 0a 60 8b 0a 48 83 c0 30 48 83 c2 04 89 48 d0 89 48 d4 48 39 f0 75 eb 41 8b 42 08 83 7d d4 01 41 c7 82 ec 01 00 00 ff ff ff ff <4d> 89 94 c5 88 00 00 00 74 14 83 c3 01 41 39 dc 0f 85 f1 fe ff RIP: __vb2_queue_alloc+0x134/0x4e0 [videobuf2_core] RSP: ffffb7c40241bc60 CR2: ffff888b773c0890 So, add a sanity check in order to prevent going past array. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-13pxa_camera: fix module remove codepath for v4l2 clockPetr Cvek1-1/+13
[ Upstream commit e3b4d10cc057522353c4a02f2f90dca6a52e006f ] The conversion from soc_camera omitted a correct handling of the clock gating for a sensor. When the pxa_camera driver module was removed it tried to unregister clk, but this caused a similar warning: WARNING: CPU: 0 PID: 6740 at drivers/media/v4l2-core/v4l2-clk.c:278 v4l2_clk_unregister(): Refusing to unregister ref-counted 0-0030 clock! The clock was at time still refcounted by the sensor driver. Before the removing of the pxa_camera the clock must be dropped by the sensor driver. This should be triggered by v4l2_async_notifier_unregister() call which removes sensor driver module too, calls unbind() function and then tries to probe sensor driver again. Inside unbind() we can safely unregister the v4l2 clock as the sensor driver got removed. The original v4l2_clk_unregister() should be put inside test as the clock can be already unregistered from unbind(). If there was not any bound sensor the clock is still present. The codepath is practically a copy from the old soc_camera. The bug was tested with a pxa_camera+ov9640 combination during the conversion of the ov9640 from the soc_camera. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-08media: usbtv: prevent double free in error caseOliver Neukum1-0/+2
commit 50e7044535537b2a54c7ab798cd34c7f6d900bd2 upstream. Quoting the original report: It looks like there is a double-free vulnerability in Linux usbtv driver on an error path of usbtv_probe function. When audio registration fails, usbtv_video_free function ends up freeing usbtv data structure, which gets freed the second time under usbtv_video_fail label. usbtv_audio_fail: usbtv_video_free(usbtv); => v4l2_device_put(&usbtv->v4l2_dev); => v4l2_device_put => kref_put => v4l2_device_release => usbtv_release (CALLBACK) => kfree(usbtv) (1st time) usbtv_video_fail: usb_set_intfdata(intf, NULL); usb_put_dev(usbtv->udev); kfree(usbtv); (2nd time) So, as we have refcounting, use it Reported-by: Yavuz, Tuba <tuba@ece.ufl.edu> Signed-off-by: Oliver Neukum <oneukum@suse.com> CC: stable@vger.kernel.org Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24media: [RESEND] media: dvb-frontends: Add delay to Si2168 restartRon Economos1-0/+3
[ Upstream commit 380a6c86457573aa42d27ae11e025eb25941a0b7 ] On faster CPUs a delay is required after the resume command and the restart command. Without the delay, the restart command often returns -EREMOTEIO and the Si2168 does not restart. Note that this patch fixes the same issue as https://patchwork.linuxtv.org/patch/44304/, but I believe my udelay() fix addresses the actual problem. Signed-off-by: Ron Economos <w6rz@comcast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24media: bt8xx: Fix err 'bt878_probe()'Christophe JAILLET1-2/+1
[ Upstream commit 45392ff6881dbe56d41ef0b17c2e576065f8ffa1 ] This is odd to call 'pci_disable_device()' in an error path before a coresponding successful 'pci_enable_device()'. Return directly instead. Fixes: 77e0be12100a ("V4L/DVB (4176): Bug-fix: Fix memory overflow") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24media: c8sectpfe: fix potential NULL pointer dereference in ↵Gustavo A. R. Silva1-1/+3
c8sectpfe_timer_interrupt [ Upstream commit baed3c4bc4c13de93e0dba0a26d601411ebcb389 ] _channel_ is being dereferenced before it is null checked, hence there is a potential null pointer dereference. Fix this by moving the pointer dereference after _channel_ has been null checked. This issue was detected with the help of Coccinelle. Fixes: c5f5d0f99794 ("[media] c8sectpfe: STiH407/10 Linux DVB demux support") Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Acked-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-24media/dvb-core: Race condition when writing to CAMJasmin J1-0/+23
[ Upstream commit e7080d4471d805d921a9ea21b32f911a91e248cb ] It started with a sporadic message in syslog: "CAM tried to send a buffer larger than the ecount size" This message is not the fault itself, but a consecutive fault, after a read error from the CAM. This happens only on several CAMs, several hardware, and of course sporadic. It is a consecutive fault, if the last read from the CAM did fail. I guess this will not happen on all CAMs, but at least it did on mine. There was a write error to the CAM and during the re-initialization procedure, the CAM finished the last read, although it got a RS. The write error to the CAM happened because a race condition between HC write, checking DA and FR. This patch added an additional check for DA(RE), just after checking FR. It is important to read the CAMs status register again, to give the CAM the necessary time for a proper reaction to HC. Please note the description within the source code (patch below). [mchehab@s-opensource.com: make checkpatch happy] Signed-off-by: Jasmin jessich <jasmin@anw.at> Tested-by: Ralph Metzler <rjkm@metzlerbros.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-22media: cpia2: Fix a couple off by one bugsDan Carpenter1-2/+2
[ Upstream commit d5ac225c7d64c9c3ef821239edc035634e594ec9 ] The cam->buffers[] array has cam->num_frames elements so the > needs to be changed to >= to avoid going beyond the end of the array. The ->buffers[] array is allocated in cpia2_allocate_buffers() if you want to confirm. Fixes: ab33d5071de7 ("V4L/DVB (3376): Add cpia2 camera support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-22media: vsp1: Prevent suspending and resuming DRM pipelinesKieran Bingham1-2/+14
[ Upstream commit a17d2d6cd9985ca09a9e384f1bc71d710f7e5203 ] When used as part of a display pipeline, the VSP is stopped and restarted explicitly by the DU from its suspend and resume handlers. There is thus no need to stop or restart pipelines in the VSP suspend and resume handlers, and doing so would cause the hardware to be left in a misconfigured state. Ensure that the VSP suspend and resume handlers do not affect DRM-based pipelines. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-22v4l: vsp1: Register pipe with output WPFKieran Bingham1-0/+1
[ Upstream commit 1531a208ed861e4bd287444f9466ffcf98383de2 ] The DRM object does not register the pipe with the WPF object. This is used internally throughout the driver as a means of accessing the pipe. As such this breaks operations which require access to the pipe from WPF interrupts. Register the pipe inside the WPF object after it has been declared as the output. Fixes: ff7e97c94d9f ("[media] v4l: vsp1: Store pipeline pointer in rwpf") Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-22v4l: vsp1: Prevent multiple streamon race commencing pipeline earlyKieran Bingham1-0/+13
[ Upstream commit 4461c84b52b4a952c657505ef7e4e06b016783df ] With multiple inputs through the BRU it is feasible for the streams to race each other at stream-on. Multiple VIDIOC_STREAMON calls racing each other could have process N-1 skipping over the pipeline setup section and then start the pipeline early, if videobuf2 has already enqueued buffers to the driver for process N but not called the .start_streaming() operation yet In the case of the video pipelines, this can present two serious issues. 1) A null-dereference if the pipe->dl is committed at the same time as the vsp1_video_setup_pipeline() is processing 2) A hardware hang, where a display list is committed without having called vsp1_video_setup_pipeline() first Repair this issue, by ensuring that only the stream which configures the pipeline is able to start it. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-22media: i2c/soc_camera: fix ov6650 sensor getting wrong clockJanusz Krzysztofik1-1/+1
[ Upstream commit 54449af0e0b2ea43a8166611c95b730c850c3184 ] After changes to v4l2_clk API introduced in v4.1 by commits a37462b919 '[media] V4L: remove clock name from v4l2_clk API' and 4f528afcfb '[media] V4L: add CCF support to the v4l2_clk API', ov6650 sensor stopped responding because v4l2_clk_get(), still called with depreciated V4L2 clock name "mclk", started to return respective CCF clock instead of the V4l2 one registered by soc_camera. Fix it by calling v4l2_clk_get() with NULL clock name. Created and tested on Amstrad Delta against Linux-4.7-rc3 with omap1_camera fixes. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-22solo6x10: release vb2 buffers in solo_stop_streaming()Anton Sviridenko1-0/+11
[ Upstream commit 6e4c8480bd2eb95309ad3c875e11d2cad98f9188 ] Fixes warning that appears in dmesg after closing V4L2 userspace application that plays video from the display device (first device from V4L2 device nodes provided by solo, usually /dev/video0 when no other V4L2 devices are present). Encoder device nodes are not affected. Can be reproduced by starting and closing ffplay -f video4linux2 /dev/video0 [ 8130.281251] ------------[ cut here ]------------ [ 8130.281256] WARNING: CPU: 1 PID: 20414 at drivers/media/v4l2-core/videobuf2-core.c:1651 __vb2_queue_cancel+0x14b/0x230 [ 8130.281257] Modules linked in: ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat solo6x10 x86_pkg_temp_thermal vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) [ 8130.281264] CPU: 1 PID: 20414 Comm: ffplay Tainted: G O 4.10.0-gentoo #1 [ 8130.281264] Hardware name: ASUS All Series/B85M-E, BIOS 2301 03/30/2015 [ 8130.281265] Call Trace: [ 8130.281267] dump_stack+0x4f/0x72 [ 8130.281270] __warn+0xc7/0xf0 [ 8130.281271] warn_slowpath_null+0x18/0x20 [ 8130.281272] __vb2_queue_cancel+0x14b/0x230 [ 8130.281273] vb2_core_streamoff+0x23/0x90 [ 8130.281275] vb2_streamoff+0x24/0x50 [ 8130.281276] vb2_ioctl_streamoff+0x3d/0x50 [ 8130.281278] v4l_streamoff+0x15/0x20 [ 8130.281279] __video_do_ioctl+0x25e/0x2f0 [ 8130.281280] video_usercopy+0x279/0x520 [ 8130.281282] ? v4l_enum_fmt+0x1330/0x1330 [ 8130.281285] ? unmap_region+0xdf/0x110 [ 8130.281285] video_ioctl2+0x10/0x20 [ 8130.281286] v4l2_ioctl+0xce/0xe0 [ 8130.281289] do_vfs_ioctl+0x8b/0x5b0 [ 8130.281290] ? __fget+0x72/0xa0 [ 8130.281291] SyS_ioctl+0x74/0x80 [ 8130.281294] entry_SYSCALL_64_fastpath+0x13/0x94 [ 8130.281295] RIP: 0033:0x7ff86fee6b27 [ 8130.281296] RSP: 002b:00007ffe467f6a08 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ 8130.281297] RAX: ffffffffffffffda RBX: 00000000d1a4d788 RCX: 00007ff86fee6b27 [ 8130.281297] RDX: 00007ffe467f6a14 RSI: 0000000040045613 RDI: 0000000000000006 [ 8130.281298] RBP: 000000000373f8d0 R08: 00000000ffffffff R09: 00007ff860001140 [ 8130.281298] R10: 0000000000000243 R11: 0000000000000246 R12: 0000000000000000 [ 8130.281299] R13: 00000000000000a0 R14: 00007ffe467f6530 R15: 0000000001f32228 [ 8130.281300] ---[ end trace 00695dc96be646e7 ]--- Signed-off-by: Anton Sviridenko <anton@corp.bluecherry.net> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-18tc358743: fix register i2c_rd/wr function fixPhilipp Zabel1-1/+1
commit f2c61f98e0b5f8b53b8fb860e5dcdd661bde7d0b upstream. The below mentioned fix contains a small but severe bug, fix it to make the driver work again. Fixes: 3538aa6ecfb2 ("[media] tc358743: fix register i2c_rd/wr functions") Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-11media: m88ds3103: don't call a non-initalized functionMauro Carvalho Chehab1-2/+5
commit b9c97c67fd19262c002d94ced2bfb513083e161e upstream. If m88d3103 chip ID is not recognized, the device is not initialized. However, it returns from probe without any error, causing this OOPS: [ 7.689289] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 7.689297] pgd = 7b0bd7a7 [ 7.689302] [00000000] *pgd=00000000 [ 7.689318] Internal error: Oops: 80000005 [#1] SMP ARM [ 7.689322] Modules linked in: dvb_usb_dvbsky(+) m88ds3103 dvb_usb_v2 dvb_core videobuf2_vmalloc videobuf2_memops videobuf2_core crc32_arm_ce videodev media [ 7.689358] CPU: 3 PID: 197 Comm: systemd-udevd Not tainted 4.15.0-mcc+ #23 [ 7.689361] Hardware name: BCM2835 [ 7.689367] PC is at 0x0 [ 7.689382] LR is at m88ds3103_attach+0x194/0x1d0 [m88ds3103] [ 7.689386] pc : [<00000000>] lr : [<bf0ae1ec>] psr: 60000013 [ 7.689391] sp : ed8e5c20 ip : ed8c1e00 fp : ed8945c0 [ 7.689395] r10: ed894000 r9 : ed894378 r8 : eda736c0 [ 7.689400] r7 : ed894070 r6 : ed8e5c44 r5 : bf0bb040 r4 : eda77600 [ 7.689405] r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : eda77600 [ 7.689412] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 7.689417] Control: 10c5383d Table: 2d8e806a DAC: 00000051 [ 7.689423] Process systemd-udevd (pid: 197, stack limit = 0xe9dbfb63) [ 7.689428] Stack: (0xed8e5c20 to 0xed8e6000) [ 7.689439] 5c20: ed853a80 eda73640 ed894000 ed8942c0 ed853a80 bf0b9e98 ed894070 bf0b9f10 [ 7.689449] 5c40: 00000000 00000000 bf08c17c c08dfc50 00000000 00000000 00000000 00000000 [ 7.689459] 5c60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.689468] 5c80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.689479] 5ca0: 00000000 00000000 ed8945c0 ed8942c0 ed894000 ed894830 bf0b9e98 00000000 [ 7.689490] 5cc0: ed894378 bf0a3cb4 bf0bc3b0 0000533b ed920540 00000000 00000034 bf0a6434 [ 7.689500] 5ce0: ee952070 ed826600 bf0a7038 bf0a2dd8 00000001 bf0a6768 bf0a2f90 ed8943c0 [ 7.689511] 5d00: 00000000 c08eca68 ed826620 ed826620 00000000 ee952070 bf0bc034 ee952000 [ 7.689521] 5d20: ed826600 bf0bb080 ffffffed c0aa9e9c c0aa9dac ed826620 c16edf6c c168c2c8 [ 7.689531] 5d40: c16edf70 00000000 bf0bc034 0000000d 00000000 c08e268c bf0bb080 ed826600 [ 7.689541] 5d60: bf0bc034 ed826654 ed826620 bf0bc034 c164c8bc 00000000 00000001 00000000 [ 7.689553] 5d80: 00000028 c08e2948 00000000 bf0bc034 c08e2848 c08e0778 ee9f0a58 ed88bab4 [ 7.689563] 5da0: bf0bc034 ed90ba80 c168c1f0 c08e1934 bf0bb3bc c17045ac bf0bc034 c164c8bc [ 7.689574] 5dc0: bf0bc034 bf0bb3bc ed91f564 c08e34ec bf0bc000 c164c8bc bf0bc034 c0aa8dc4 [ 7.689584] 5de0: ffffe000 00000000 bf0bf000 ed91f600 ed91f564 c03021e4 00000001 00000000 [ 7.689595] 5e00: c166e040 8040003f ed853a80 bf0bc448 00000000 c1678174 ed853a80 f0f22000 [ 7.689605] 5e20: f0f21fff 8040003f 014000c0 ed91e700 ed91e700 c16d8e68 00000001 ed91e6c0 [ 7.689615] 5e40: bf0bc400 00000001 bf0bc400 ed91f564 00000001 00000000 00000028 c03c9a24 [ 7.689625] 5e60: 00000001 c03c8c94 ed8e5f50 ed8e5f50 00000001 bf0bc400 ed91f540 c03c8cb0 [ 7.689637] 5e80: bf0bc40c 00007fff bf0bc400 c03c60b0 00000000 bf0bc448 00000028 c0e09684 [ 7.689647] 5ea0: 00000002 bf0bc530 c1234bf8 bf0bc5dc bf0bc514 c10ebbe8 ffffe000 bf000000 [ 7.689657] 5ec0: 00011538 00000000 ed8e5f48 00000000 00000000 00000000 00000000 00000000 [ 7.689666] 5ee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.689676] 5f00: 00000000 00000000 7fffffff 00000000 00000013 b6e55a18 0000017b c0309104 [ 7.689686] 5f20: ed8e4000 00000000 00510af0 c03c9430 7fffffff 00000000 00000003 00000000 [ 7.689697] 5f40: 00000000 f0f0f000 00011538 00000000 f0f107b0 f0f0f000 00011538 f0f1fdb8 [ 7.689707] 5f60: f0f1fbe8 f0f1b974 00004000 000041e0 bf0bc3d0 00000001 00000000 000024c4 [ 7.689717] 5f80: 0000002d 0000002e 00000019 00000000 00000010 00000000 16894000 00000000 [ 7.689727] 5fa0: 00000000 c0308f20 16894000 00000000 00000013 b6e55a18 00000000 b6e5652c [ 7.689737] 5fc0: 16894000 00000000 00000000 0000017b 00020000 00508110 00000000 00510af0 [ 7.689748] 5fe0: bef68948 bef68938 b6e4d3d0 b6d32590 60000010 00000013 00000000 00000000 [ 7.689790] [<bf0ae1ec>] (m88ds3103_attach [m88ds3103]) from [<bf0b9f10>] (dvbsky_s960c_attach+0x78/0x280 [dvb_usb_dvbsky]) [ 7.689821] [<bf0b9f10>] (dvbsky_s960c_attach [dvb_usb_dvbsky]) from [<bf0a3cb4>] (dvb_usbv2_probe+0xa3c/0x1024 [dvb_usb_v2]) [ 7.689849] [<bf0a3cb4>] (dvb_usbv2_probe [dvb_usb_v2]) from [<c0aa9e9c>] (usb_probe_interface+0xf0/0x2a8) [ 7.689869] [<c0aa9e9c>] (usb_probe_interface) from [<c08e268c>] (driver_probe_device+0x2f8/0x4b4) [ 7.689881] [<c08e268c>] (driver_probe_device) from [<c08e2948>] (__driver_attach+0x100/0x11c) [ 7.689895] [<c08e2948>] (__driver_attach) from [<c08e0778>] (bus_for_each_dev+0x4c/0x9c) [ 7.689909] [<c08e0778>] (bus_for_each_dev) from [<c08e1934>] (bus_add_driver+0x1c0/0x264) [ 7.689919] [<c08e1934>] (bus_add_driver) from [<c08e34ec>] (driver_register+0x78/0xf4) [ 7.689931] [<c08e34ec>] (driver_register) from [<c0aa8dc4>] (usb_register_driver+0x70/0x134) [ 7.689946] [<c0aa8dc4>] (usb_register_driver) from [<c03021e4>] (do_one_initcall+0x44/0x168) [ 7.689963] [<c03021e4>] (do_one_initcall) from [<c03c9a24>] (do_init_module+0x64/0x1f4) [ 7.689979] [<c03c9a24>] (do_init_module) from [<c03c8cb0>] (load_module+0x20a0/0x25c8) [ 7.689993] [<c03c8cb0>] (load_module) from [<c03c9430>] (SyS_finit_module+0xb4/0xec) [ 7.690007] [<c03c9430>] (SyS_finit_module) from [<c0308f20>] (ret_fast_syscall+0x0/0x54) [ 7.690018] Code: bad PC value This may happen on normal circumstances, if, for some reason, the demod hangs and start returning an invalid chip ID: [ 10.394395] m88ds3103 3-0068: Unknown device. Chip_id=00 So, change the logic to cause probe to fail with -ENODEV, preventing the OOPS. Detected while testing DVB MMAP patches on Raspberry Pi 3 with DVBSky S960CI. Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-28v4l2: disable filesystem-dax mapping supportDan Williams1-2/+3
commit b70131de648c2b997d22f4653934438013f407a1 upstream. V4L2 memory registrations are incompatible with filesystem-dax that needs the ability to revoke dma access to a mapping at will, or otherwise allow the kernel to wait for completion of DMA. The filesystem-dax implementation breaks the traditional solution of truncate of active file backed mappings since there is no page-cache page we can orphan to sustain ongoing DMA. If v4l2 wants to support long lived DMA mappings it needs to arrange to hold a file lease or use some other mechanism so that the kernel can coordinate revoking DMA access when the filesystem needs to truncate mappings. Link: http://lkml.kernel.org/r/151068940499.7446.12846708245365671207.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: 3565fce3a659 ("mm, x86: get_user_pages() for dax mappings") Signed-off-by: Dan Williams <dan.j.williams@intel.com> Reported-by: Jan Kara <jack@suse.cz> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Doug Ledford <dledford@redhat.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25tw5864: use dev_warn instead of WARN to shut up warningArnd Bergmann1-2/+4
commit 27430d19a91615245babaa9b216d0807636903a0 upstream. tw5864_frameinterval_get() only initializes its output when it successfully identifies the video standard in tw5864_input. We get a warning here because gcc can't always track the state if initialized warnings across a WARN() macro, and thinks it might get used incorrectly in tw5864_s_parm: media/pci/tw5864/tw5864-video.c: In function 'tw5864_s_parm': media/pci/tw5864/tw5864-video.c:816:38: error: 'time_base.numerator' may be used uninitialized in this function [-Werror=maybe-uninitialized] media/pci/tw5864/tw5864-video.c:819:31: error: 'time_base.denominator' may be used uninitialized in this function [-Werror=maybe-uninitialized] Using dev_warn() instead of WARN() avoids the __branch_check__() in unlikely and lets the compiler see that the initialization is correct. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Andrey Utkin <andrey.utkin@corp.bluecherry.net> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25em28xx: only use mt9v011 if camera support is enabledArnd Bergmann1-1/+1
commit 190b23b4eb997767afad186bd8c96badceabf39e upstream. In randconfig builds that select VIDEO_EM28XX_V4L2 and MEDIA_SUBDRV_AUTOSELECT, but not MEDIA_CAMERA_SUPPORT, we get a Kconfig warning: warning: (VIDEO_EM28XX_V4L2) selects VIDEO_MT9V011 which has unmet direct dependencies (MEDIA_SUPPORT && I2C && VIDEO_V4L2 && MEDIA_CAMERA_SUPPORT) This avoids the warning by making that 'select' conditional on MEDIA_CAMERA_SUPPORT. Alternatively we could mark EM28XX as 'depends on MEDIA_CAMERA_SUPPORT', but it does not seem to have any real dependency on that itself. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25go7007: add MEDIA_CAMERA_SUPPORT dependencyArnd Bergmann1-1/+1
commit fa6317eedd6341f2144ed1097706d8c34f18b6e4 upstream. If MEDIA_SUBDRV_AUTOSELECT and VIDEO_GO7007 are both set, we automatically select VIDEO_OV7640, but that depends on MEDIA_CAMERA_SUPPORT, so we get a Kconfig warning if that is disabled: warning: (VIDEO_GO7007) selects VIDEO_OV7640 which has unmet direct dependencies (MEDIA_SUPPORT && I2C && VIDEO_V4L2 && MEDIA_CAMERA_SUPPORT) This adds another dependency so we don't accidentally select it when it is unavailable. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25tc358743: fix register i2c_rd/wr functionsArnd Bergmann1-21/+25
commit 3538aa6ecfb2dd727a40f9ebbbf25a0c2afe6226 upstream. While testing with CONFIG_UBSAN, I got this warning: drivers/media/i2c/tc358743.c: In function 'tc358743_probe': drivers/media/i2c/tc358743.c:1930:1: error: the frame size of 2480 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] The problem is that the i2c_rd8/wr8/rd16/... functions in this driver pass a pointer to a local variable into a common function, and each call to one of them adds another variable plus redzone to the stack. I also noticed that the way this is done is broken on big-endian machines, as we copy the registers in CPU byte order. To address both those problems, I'm adding two helper functions for reading a register of up to 32 bits with correct endianess and change all other functions to use that instead. Just to be sure we don't get the problem back with changed optimizations in gcc, I'm also marking the new functions as 'noinline', although my tests with gcc-7 don't require that. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-25media: s5k6aa: describe some function parametersMauro Carvalho Chehab1-0/+5
[ Upstream commit 070250a1715cee2297de0d9e7e2cea58be999d37 ] as warned: drivers/media/i2c/s5k6aa.c:429: warning: No description found for parameter 's5k6aa' drivers/media/i2c/s5k6aa.c:679: warning: No description found for parameter 's5k6aa' drivers/media/i2c/s5k6aa.c:733: warning: No description found for parameter 's5k6aa' drivers/media/i2c/s5k6aa.c:733: warning: No description found for parameter 'preset' drivers/media/i2c/s5k6aa.c:787: warning: No description found for parameter 'sd' Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-22media: r820t: fix r820t_write_reg for KASANArnd Bergmann1-5/+8
commit 16c3ada89cff9a8c2a0eea34ffa1aa20af3f6008 upstream. With CONFIG_KASAN, we get an overly long stack frame due to inlining the register access functions: drivers/media/tuners/r820t.c: In function 'generic_set_freq.isra.7': drivers/media/tuners/r820t.c:1334:1: error: the frame size of 2880 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] This is caused by a gcc bug that has now been fixed in gcc-8. To work around the problem, we can pass the register data through a local variable that older gcc versions can optimize out as well. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-17media: cxusb, dib0700: ignore XC2028_I2C_FLUSHMauro Carvalho Chehab2-0/+3
commit 9893b905e743ded332575ca04486bd586c0772f7 upstream. The XC2028_I2C_FLUSH only needs to be implemented on a few devices. Others can safely ignore it. That prevents filling the dmesg with lots of messages like: dib0700: stk7700ph_xc3028_callback: unknown command 2, arg 0 Fixes: 4d37ece757a8 ("[media] tuner/xc2028: Add I2C flush callback") Reported-by: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-17media: ts2020: avoid integer overflows on 32 bit machinesMauro Carvalho Chehab1-2/+2
commit 81742be14b6a90c9fd0ff6eb4218bdf696ad8e46 upstream. Before this patch, when compiled for arm32, the signal strength were reported as: Lock (0x1f) Signal= 4294908.66dBm C/N= 12.79dB Because of a 32 bit integer overflow. After it, it is properly reported as: Lock (0x1f) Signal= -58.64dBm C/N= 12.79dB Fixes: 0f91c9d6bab9 ("[media] TS2020: Calculate tuner gain correctly") Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-17media: dvb-frontends: fix i2c access helpers for KASANArnd Bergmann12-14/+37
commit 3cd890dbe2a4f14cc44c85bb6cf37e5e22d4dd0e upstream. A typical code fragment was copied across many dvb-frontend drivers and causes large stack frames when built with with CONFIG_KASAN on gcc-5/6/7: drivers/media/dvb-frontends/cxd2841er.c:3225:1: error: the frame size of 3992 bytes is larger than 3072 bytes [-Werror=frame-larger-than=] drivers/media/dvb-frontends/cxd2841er.c:3404:1: error: the frame size of 3136 bytes is larger than 3072 bytes [-Werror=frame-larger-than=] drivers/media/dvb-frontends/stv0367.c:3143:1: error: the frame size of 4016 bytes is larger than 3072 bytes [-Werror=frame-larger-than=] drivers/media/dvb-frontends/stv090x.c:3430:1: error: the frame size of 5312 bytes is larger than 3072 bytes [-Werror=frame-larger-than=] drivers/media/dvb-frontends/stv090x.c:4248:1: error: the frame size of 4872 bytes is larger than 3072 bytes [-Werror=frame-larger-than=] gcc-8 now solves this by consolidating the stack slots for the argument variables, but on older compilers we can get the same behavior by taking the pointer of a local variable rather than the inline function argument. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-17media: v4l2-compat-ioctl32.c: refactor compat ioctl32 logicDaniel Mentz1-261/+483
commit a1dfb4c48cc1e64eeb7800a27c66a6f7e88d075a upstream. The 32-bit compat v4l2 ioctl handling is implemented based on its 64-bit equivalent. It converts 32-bit data structures into its 64-bit equivalents and needs to provide the data to the 64-bit ioctl in user space memory which is commonly allocated using compat_alloc_user_space(). However, due to how that function is implemented, it can only be called a single time for every syscall invocation. Supposedly to avoid this limitation, the existing code uses a mix of memory from the kernel stack and memory allocated through compat_alloc_user_space(). Under normal circumstances, this would not work, because the 64-bit ioctl expects all pointers to point to user space memory. As a workaround, set_fs(KERNEL_DS) is called to temporarily disable this extra safety check and allow kernel pointers. However, this might introduce a security vulnerability: The result of the 32-bit to 64-bit conversion is writeable by user space because the output buffer has been allocated via compat_alloc_user_space(). A malicious user space process could then manipulate pointers inside this output buffer, and due to the previous set_fs(KERNEL_DS) call, functions like get_user() or put_user() no longer prevent kernel memory access. The new approach is to pre-calculate the total amount of user space memory that is needed, allocate it using compat_alloc_user_space() and then divide up the allocated memory to accommodate all data structures that need to be converted. An alternative approach would have been to retain the union type karg that they allocated on the kernel stack in do_video_ioctl(), copy all data from user space into karg and then back to user space. However, we decided against this approach because it does not align with other compat syscall implementations. Instead, we tried to replicate the get_user/put_user pairs as found in other places in the kernel: if (get_user(clipcount, &up->clipcount) || put_user(clipcount, &kp->clipcount)) return -EFAULT; Notes from hans.verkuil@cisco.com: This patch was taken from: https://github.com/LineageOS/android_kernel_samsung_apq8084/commit/97b733953c06e4f0398ade18850f0817778255f7 Clearly nobody could be bothered to upstream this patch or at minimum tell us :-( We only heard about this a week ago. This patch was rebased and cleaned up. Compared to the original I also swapped the order of the convert_in_user arguments so that they matched copy_in_user. It was hard to review otherwise. I also replaced the ALLOC_USER_SPACE/ALLOC_AND_GET by a normal function. Fixes: 6b5a9492ca ("v4l: introduce string control support.") Signed-off-by: Daniel Mentz <danielmentz@google.com> Co-developed-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-17media: v4l2-compat-ioctl32.c: don't copy back the result for certain errorsHans Verkuil1-0/+3
commit d83a8243aaefe62ace433e4384a4f077bed86acb upstream. Some ioctls need to copy back the result even if the ioctl returned an error. However, don't do this for the error code -ENOTTY. It makes no sense in that cases. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-17media: v4l2-compat-ioctl32.c: drop pr_info for unknown buffer typeHans Verkuil1-4/+0
commit 169f24ca68bf0f247d111aef07af00dd3a02ae88 upstream. There is nothing wrong with using an unknown buffer type. So stop spamming the kernel log whenever this happens. The kernel will just return -EINVAL to signal this. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-17media: v4l2-compat-ioctl32.c: copy clip list in put_v4l2_window32Hans Verkuil1-19/+40
commit a751be5b142ef6bcbbb96d9899516f4d9c8d0ef4 upstream. put_v4l2_window32() didn't copy back the clip list to userspace. Drivers can update the clip rectangles, so this should be done. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-17media: v4l2-compat-ioctl32: Copy v4l2_window->global_alphaDaniel Mentz1-2/+5
commit 025a26fa14f8fd55d50ab284a30c016a5be953d0 upstream. Commit b2787845fb91 ("V4L/DVB (5289): Add support for video output overlays.") added the field global_alpha to struct v4l2_window but did not update the compat layer accordingly. This change adds global_alpha to struct v4l2_window32 and copies the value for global_alpha back and forth. Signed-off-by: Daniel Mentz <danielmentz@google.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-17media: v4l2-compat-ioctl32.c: make ctrl_is_pointer work for subdevsHans Verkuil1-1/+1
commit 273caa260035c03d89ad63d72d8cd3d9e5c5e3f1 upstream. If the device is of type VFL_TYPE_SUBDEV then vdev->ioctl_ops is NULL so the 'if (!ops->vidioc_query_ext_ctrl)' check would crash. Add a test for !ops to the condition. All sub-devices that have controls will use the control framework, so they do not have an equivalent to ops->vidioc_query_ext_ctrl. Returning false if ops is NULL is the correct thing to do here. Fixes: b8c601e8af ("v4l2-compat-ioctl32.c: fix ctrl_is_pointer") Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-17media: v4l2-compat-ioctl32.c: fix ctrl_is_pointerHans Verkuil1-19/+38
commit b8c601e8af2d08f733d74defa8465303391bb930 upstream. ctrl_is_pointer just hardcoded two known string controls, but that caused problems when using e.g. custom controls that use a pointer for the payload. Reimplement this function: it now finds the v4l2_ctrl (if the driver uses the control framework) or it calls vidioc_query_ext_ctrl (if the driver implements that directly). In both cases it can now check if the control is a pointer control or not. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-17media: v4l2-compat-ioctl32.c: copy m.userptr in put_v4l2_plane32Hans Verkuil1-19/+28
commit 8ed5a59dcb47a6f76034ee760b36e089f3e82529 upstream. The struct v4l2_plane32 should set m.userptr as well. The same happens in v4l2_buffer32 and v4l2-compliance tests for this. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-17media: v4l2-compat-ioctl32.c: avoid sizeof(type)Hans Verkuil1-41/+36
commit 333b1e9f96ce05f7498b581509bb30cde03018bf upstream. Instead of doing sizeof(struct foo) use sizeof(*up). There even were cases where 4 * sizeof(__u32) was used instead of sizeof(kp->reserved), which is very dangerous when the size of the reserved array changes. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-17media: v4l2-compat-ioctl32.c: move 'helper' functions to __get/put_v4l2_format32Hans Verkuil1-84/+20
commit 486c521510c44a04cd756a9267e7d1e271c8a4ba upstream. These helper functions do not really help. Move the code to the __get/put_v4l2_format32 functions. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-17media: v4l2-compat-ioctl32.c: fix the indentationHans Verkuil1-104/+104
commit b7b957d429f601d6d1942122b339474f31191d75 upstream. The indentation of this source is all over the place. Fix this. This patch only changes whitespace. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-17media: v4l2-compat-ioctl32.c: add missing VIDIOC_PREPARE_BUFHans Verkuil1-0/+1
commit 3ee6d040719ae09110e5cdf24d5386abe5d1b776 upstream. The result of the VIDIOC_PREPARE_BUF ioctl was never copied back to userspace since it was missing in the switch. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-17media: v4l2-ioctl.c: don't copy back the result for -ENOTTYHans Verkuil1-1/+4
commit 181a4a2d5a0a7b43cab08a70710d727e7764ccdd upstream. If the ioctl returned -ENOTTY, then don't bother copying back the result as there is no point. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-17media: hdpvr: Fix an error handling path in hdpvr_probe()Arvind Yadav1-11/+15
commit c0f71bbb810237a38734607ca4599632f7f5d47f upstream. Here, hdpvr_register_videodev() is responsible for setup and register a video device. Also defining and initializing a worker. hdpvr_register_videodev() is calling by hdpvr_probe at last. So no need to flush any work here. Unregister v4l2, free buffers and memory. If hdpvr_probe() will fail. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-17media: dvb-usb-v2: lmedm04: move ts2020 attach to dm04_lme2510_tunerMalcolm Priestley1-7/+6
commit 7bf7a7116ed313c601307f7e585419369926ab05 upstream. When the tuner was split from m88rs2000 the attach function is in wrong place. Move to dm04_lme2510_tuner to trap errors on failure and removing a call to lme_coldreset. Prevents driver starting up without any tuner connected. Fixes to trap for ts2020 fail. LME2510(C): FE Found M88RS2000 ts2020: probe of 0-0060 failed with error -11 ... LME2510(C): TUN Found RS2000 tuner kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-17media: dvb-usb-v2: lmedm04: Improve logic checking of warm startMalcolm Priestley1-8/+18
commit 3d932ee27e852e4904647f15b64dedca51187ad7 upstream. Warm start has no check as whether a genuine device has connected and proceeds to next execution path. Check device should read 0x47 at offset of 2 on USB descriptor read and it is the amount requested of 6 bytes. Fix for kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access as Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-13media: soc_camera: soc_scale_crop: add missing MODULE_DESCRIPTION/AUTHOR/LICENSEJesse Chan1-0/+4
commit 5331aec1bf9c9da557668174e0a4bfcee39f1121 upstream. This change resolves a new compile-time warning when built as a loadable module: WARNING: modpost: missing MODULE_LICENSE() in drivers/media/platform/soc_camera/soc_scale_crop.o see include/linux/module.h for more information This adds the license as "GPL", which matches the header of the file. MODULE_DESCRIPTION and MODULE_AUTHOR are also added. Signed-off-by: Jesse Chan <jc@linux.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-02-03media: usbtv: add a new usbidIcenowy Zheng1-0/+1
[ Upstream commit 04226916d2360f56d57ad00bc48d2d1854d1e0b0 ] A new usbid of UTV007 is found in a newly bought device. The usbid is 1f71:3301. The ID on the chip is: UTV007 A89029.1 1520L18K1 Both video and audio is tested with the modified usbtv driver. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-08 00:40:39 +0300