summaryrefslogtreecommitdiff
path: root/drivers/media/video/s5p-fimc
AgeCommit message (Collapse)AuthorFilesLines
2010-12-29[media] drivers/media/video: Update WARN usesJoe Perches1-1/+1
Add missing newlines. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20[media] s5p-fimc: Fix output DMA handling in S5PV310 IP revisionsSylwester Nawrocki4-3/+19
FIMC IP in S5Pv310 series has extended DMA status registers and some bit fields are marked as reserved comparing to S5PC100/110. Use correct registers for getting DMA write pointer in each SoC variant supported by the driver. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20[media] s5p-fimc: Use correct fourcc code for 32-bit RGB formatSylwester Nawrocki1-2/+2
Replace V4L2_PIX_FMT_RGB24 code with V4L2_PIX_FMT_RGB32 since the hardware uses 24-bits for actual pixel data but pixels are 4-byte aligned in memory. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20[media] s5p-fimc: Convert m2m driver to unlocked_ioctlSylwester Nawrocki1-6/+16
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20[media] s5p-fimc: Explicitly add required header fileSylwester Nawrocki1-1/+3
Reported by: Dan Carpenter <error27@gmail.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20[media] s5p-fimc: Fix vidioc_g_crop/cropcap on camera sensorSylwester Nawrocki3-19/+59
Create separate vidioc_g_crop/vidioc_s_crop handlers for capture video node and so image cropping parameters are properly queried at FIMC input (image sensor) and not at FIMC output. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-20[media] s5p-fimc: BKL lock removal - compilation fixSylwester Nawrocki1-1/+1
Adapt to recent videobuf_queue_dma_contig_init signature change. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-11-22[media] v4l: Remove module_name argument to the v4l2_i2c_new_subdev* functionsLaurent Pinchart1-1/+1
The argument isn't used anymore by the functions, remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-11-22[media] v4l: Remove hardcoded module names passed to v4l2_i2c_new_subdev* (2)Laurent Pinchart1-1/+1
With the v4l2_i2c_new_subdev* functions now supporting loading modules based on modaliases, replace the hardcoded module name passed to those functions by NULL in the cafe-ccic, via-camera and s5p-fimc drivers. All corresponding I2C modules have been checked, and all of them include a module aliases table with names corresponding to what the drivers modified here use. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-23[media] s5p-fimc: dubious one-bit signed bitfieldsSylwester Nawrocki1-4/+4
> From: Dan Carpenter [mailto:error27@gmail.com] > > These are signed so instead of being 1 and 0 as intended they are -1 and > 0. It doesn't cause a bug in the current code but Sparse warns about > it: > > drivers/media/video/s5p-fimc/fimc-core.h:226:28: > error: dubious one-bit signed bitfield > struct fimc_scaler { > - int scaleup_h:1; > - int scaleup_v:1; > - int copy_mode:1; > - int enabled:1; > + unsigned int scaleup_h:1; > + unsigned int caleup_v:1; > + unsigned int copy_mode:1; > + unsigned int enabled:1; In general I agree, however this patch would change scaleup_v:1 to caleup_v, so it cannot be applied in current form. Here is the corrected patch: Reported-by: Dan Carpenter <error27@gmail.com< Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-23[media] s5p-fimc: add unlock on error pathDan Carpenter1-4/+7
There was an unlock missing if kzalloc() failed. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21[media] s5p-fimc: Add suport for FIMC on S5PC210 SoCsSylwester Nawrocki3-60/+156
Enable FIMC operation on S5PC210 (S5PV310) SoCs. This a minimal adaptation to obtain functionality of older FIMC IP revisions (S5PC100, S5PC110) on S5PC210 SOcs. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21[media] s5p-fimc: Add camera capture supportSylwester Nawrocki5-192/+1570
Add a video device driver per each FIMC entity to support the camera capture input mode. Video capture node is registered only if CCD sensor data is provided through driver's platfrom data and board setup code. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21[media] s5p-fimc: Do not lock both buffer queues in s_fmtSylwester Nawrocki1-38/+31
It is not necessary to lock both capture and output buffer queue while setting format for single queue. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21[media] s5p-fimc: Fix 90/270 deg rotation errorsSylwester Nawrocki2-59/+57
Due to errorneous swapping of image dimensions the rotation control was not handled properly in subsequent calls. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21[media] s5p-fimc: mem2mem driver refactoring and cleanupSylwester Nawrocki3-178/+148
Register access functions refactored for camera capture interface control. Removed the workqueue since it was only useful for FIFO output mode which is not supported at this time. Fixed errors on module unload. Comments and whitespace cleanup. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21[media] s5p-fimc: Register definition cleanupSylwester Nawrocki2-39/+28
Add MIPI CSI format definitions, prepare DMA address definitions for interlaced input frame mode. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: videobuf: add ext_lock argument to the queue init functions (part 2)Hans Verkuil1-1/+1
Missed a few init functions on non-Intel platforms the first time :-( Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-28V4L/DVB: v4l: s5p-fimc: Fix 3-planar formats handling and pixel offset error ↵Sylwester Nawrocki1-50/+37
on S5PV210 SoCs Fix DMA engine pixel offset calculation for 3-planar YUV formats. On S5PV210 SoCs horizontal offset is applied as number of pixels, not bytes per line. [mchehab@redhat.com: CodingStyle cleanup] Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-28V4L/DVB: v4l: s5p-fimc: Fix return value on probe() failurePawel Osciak1-1/+3
On failed create_workqueue() fimc_probe() was returning 0. Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-09-28V4L/DVB: unlock on error pathDan Carpenter1-1/+2
If we return directly here then we miss out on some mutex_unlock()s Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-09V4L/DVB: v4l: s5p-fimc: Fix coding style issuesPawel Osciak2-22/+44
Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-09V4L/DVB: v4l: Add driver for Samsung S5P SoC video postprocessorSylwester Nawrocki5-0/+2858
This driver exports a video device node per each camera interface/ video postprocessor (FIMC) device contained in Samsung S5P SoC series. The driver is based on v4l2-mem2mem framework. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Pawel Osciak <p.osciak@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-08 05:27:06 +0300